Hunter Fan Fan 90434 User Manual

Oscillating

Stand Fan

Owner’s Manual

Model

90405

90434

90435

Form# 44086-01

20101102

Download from Www.Somanuals.com. All Manuals Search And Download.

InTroduCTIon

Thank you for choosing the Hunter Oscillating Stand

Fan. This manual gives you complete instructions for

assembling and using your fan. Here are some the

features you will enjoy with your fan:

3 An attractive design that enhances any decor

3 A powerful motor for maximum air flow

3 Three speeds to adjust your comfort level

3 All metal construction

safeTy and WarnIngs

To reduce the risk of fire or electrical shock, DO NOT use

this fan with any solid-state speed control device.

When using electrical appliances, basic precautions

should always be taken to reduce the risk of fire, electric

shock and personal injury:

Read all instructions before using this fan.

1. Improper installation may result in the risk of fire,

electric shock or personal injury.

2. To prevent the risk of fire and electric shock, DO

NOT use the unit near windows. Rain and moisture

may create an electrical hazard.

3. The power plug must be removed from the power

socket when not in use, before cleaning, servicing,

maintenance and before moving to another location.

4. DO NOT put fan in a damp place or where humidity

is high-such as a bathroom.

5. The fan should be placed on a flat, stable surface or

tabletop to avoid overturning.

6. Use fan only for intended use, as described in this

instruction manual.

7. To protect against electrical shock, DO NOT immerse

unit, plug or cord in water or spray with liquids.

8. Close supervision is necessary when any appliance

is used by or near children.

9. NEVER insert fingers, pencils or any other objects

44086-01 20101102

Download from Www.Somanuals.com. All Manuals Search And Download.

through the grill when the fan is running.

10. DO NOT operate any appliance with a damaged

cord or plug, after the appliance malfunctions or has

been dropped or damaged in any manner.

11. To disconnect, grip plug and pull from wall outlet.

NEVER yank on cord.

12. ALWAYS use on a dry surface.

13. This product is intended for household use only and

not for commercial or industrial use.

14. DO NOT operate fan in the presence of explosive

and/or flammable fumes.

15. DO NOT place fan or any parts near an open flame,

cooking or any other heating appliances.

16. DO NOT use near curtains, plants, window

treatments, etc.

17. This appliance has a grounded three-prong plug

and is suitable for grounded receptacle use only.

An adapter is available for connecting three-blade

grounding-type plugs to two-slot receptacles. The

adapter must be properly grounded. DO NOT

attempt to defeat the purpose of this safely feature.

18. The rubber ring on this product may interact with

wood and cause damage to furniture. Do not place

on fine wood furniture.

44086-01 20101102

Download from Www.Somanuals.com. All Manuals Search And Download.

groundIng

Grounded

Plug

is appliance is for household use only and may be plugged

into any 120-volt AC electrical outlet (ordinary household cur-

rent). DO NOT use any other type of outlet.

WARNINg

Grounding Pin

Grounded Outlet

Box Cover

is unit is suitable for grounded receptacle use only.

The power cord has a grounded plug as shown in Figure

1, and must be used with an electrical outlet that can

accommodate the grounding pin. If your electrical outlet

can not accommodate the grounding pin, then you must

purchase and install one of the two types of adapters

shown in Figure

figure 1.

Adapter

Metal

Screw

NOTE: The adapters ARE NOT supplied with this fan.

Read, follow, and save the instructions that are included

with the adapter you choose. Do not use an adapter if

your electrical outlet can accommodate the grounding

pin.

Grounded Outlet

Box Cover

Grounding

Means

figure 2.

lIne Cord safeTy TIPs

1. NEVER pull or yank on the cord or the appliance.

2. To insert plug, grasp it ﬁrmly and guide it into the outlet.

3. To disconnect the appliance, grasp the plug and remove it

from the outlet.

4. Before each use, inspect the line cord for cuts and/or

abrasion marks. If any are found, the appliance should be

serviced and the line cord replaced. Please return it to our

Service Department or to an authorized service representa-

tive.

5. NEVER wrap the cord tightly around the appliance, as this

could place undue stress on the cord where it enters the ap-

pliance and could cause it to fray and break.

6. DO NOT operate appliance if the line cord shows any dam-

age, if the appliance works intermittently or stops working

entirely.

44086-01 20101102

Download from Www.Somanuals.com. All Manuals Search And Download.

fused Plug

This plug is a safety feature. It contains a safety device

(fuse) that should not be removed. Discard product if the

attachment plug is damaged. To reduce the risk of fire,

electric shock and personal injury, DO NOT remove,

replace, repair or tamper with the originally supplied

plug. If the Fan does not function properly, it may be due

to the safety device incorporated in this plug.

If the fuse fails, it is generally due to a short circuit or

circuit overload. Replace the fuse as per the instructions

below. If the replacement fuse fails, immediately

unplug the unit and contact our technical support

department for assistance.

figure 1.

figure 2.

figure 3.

Fuse Replacement:

1. To replace the fuse, first turn the unit it off and unplug

it from the wall. Locate the door on top of the plug.

Figure 1.

2. Slide the door on top of the plug towards the blades.

Figure 2.

3. Carefully remove the fuse from the clips holding it on

the top and bottom. Figure 3.

Warning! Electrical Hazard! Only replace with a

fuse type and rating matching what was removed from

the product.

4. Gently push the fuse back into the pins that will hold

it in place.

Note: If the fuse is not seated properly, the unit will not

function.

5. Slide the Door back over the fuse box in the plug.

6. Plug the fan back in and resume use.

44086-01 20101102

Download from Www.Somanuals.com. All Manuals Search And Download.

(2) Base Cover

unPaCkIng

As you unpack the fan, save the carton and packing

materials in case you want to move or ship the unit in the

future. Carefully remove all items from the box.

NOTE: It is best to have someone hold the box while

you lift the fan and the protective packaging out of the

carton. Make sure all shipping materials are removed

from fan before operating.

(1) Base Weight

figure 3.

base assembly

(3) Telescope

Pole

1. Insert the Weight(1) into the Base Cover(2). Figure 3.

2. Insert the base of the Telescoping Pole(3) into the top

of the Base Cover(2) and attach to the Base Weight(1)

by turning clockwise on the Screw(4) in the center of

the Base Weight(1). Figure 4.

(4) Screw

3. Turn the Base on it’s side and turn the handle of the

Screw(4) on the bottom of the Weight until secure.

Figure 3.

(2) Base Cover

figure 4.

4. Tip the Base back upright. Figure 5.

(4) Screw

figure 5.

figure 6.

44086-01 20101102

Download from Www.Somanuals.com. All Manuals Search And Download.

moTor assembly

1. Grasp the Telescope Pole firmly and twist the

Adjustment Knob Counter Clockwise to loosen.

Figure 7.

2. Raise the Inner Pole and tighten the Adjustment Knob

by twisting Clockwise until secure.

3. Remove the Motor Knob(7), Motor Bolt(6), and Tilt

Adjustment Knob(8). Loosen the screw above the

Motor Knob(7).

figure 7.

(5) Motor

Screw

4. Set the Motor(5) on top of the Pole(3), Figure 8.,

and Secure using the Motor Bolt(6) and Knob(7).

Retighten the screw above the motor knob in the slot

to secure motor. Figure 9.

(8) Tilt

Adjustment

Knob

Note: The Motor Bolt has a square cut on the inside of the

head, ensure this fits securely into the square hole in the

Pole. Do not overtighten the Motor Knob, as this could

make it difficult to tilt the motor later.

(6) Motor

Bolt

(3) Telescope Pole

(7) Motor

Knob

After securing the motor(5), Screw in the Tilt Adjustment

Knob(8) securely. Figure 10. This Knob allows you to

adjust the fans angle.

figure 8.

(7) Motor

Knob

(6) Motor

Bolt

figure 9.

(8) Tilt Adjustment

Knob

figure 10.

44086-01 20101102

Download from Www.Somanuals.com. All Manuals Search And Download.

Handle

grIll assembly

(9) Back Grill

1. Place the back grill against the motor housing(5),

Figure 11., and line up the 4 tabs on the back of the

grill(9) to the 4 screws holes on the front of the motor.

Caution: Make sure the Handle on the back of the Back

Grill is facing up.

2. Attach the Back Grill(9) to the Motor(5) using the 4

Grill Mount Screws. Figure 12.

(5) Motor

figure 11.

Note:1 screw will have a star washer on it, for grounding

purposes. The other 3 screws will not have a washer.

3. Loosen the Screw on the back of the Fan Blade(10),

13a., and slide the Fan Blade onto the post on the

Motor(5). Figure 13.

Screw Holes

4. Tighten the Screw on the Blade(10( to secure it to the

Motor(5). Figure 14.

Caution: Ensure when tightening the screw on the back

of the fan blade, you tighten it on the flat part of the post.

figure 12.

(10) Fan Blade

13a.

(5) Motor

figure 13.

figure 14.

44086-01 20101102

Download from Www.Somanuals.com. All Manuals Search And Download.

Hunter Logo

(9) Back Grill

grIll assembly (ConT.)

1. Remove the Grill Ring from the Front Grill(11) by

loosening the screw holding it.

2. Place the Front Grill(11) against the Back Grill(9) so

the Hunter logo faces right side up and push together

until the tabs on the grills hold them together. Figure

15.

(11)Front Grill

3. Slide the Grill Ring over both Front(11) and Back(9)

Grills turning it so the screw that will secure it is on

the bottom. Figure 16.

figure 15.

4. Tighten the Screw to secure the Grill Ring over the

Front and Back Grills.

5. Straighten the Cord from the Motor along the

Telescoping Pole and Snap the Cord Clip over the

cord onto the Pole so the cord rests in the notch on

the Clip. Figure 18.

Screw

(12) Grill Ring

figure 16.

figure 17.

Cord

(13) Cord Clip

Notch

figure 18.

44086-01 20101102

Download from Www.Somanuals.com. All Manuals Search And Download.

oPeraTIon

off / speed selection

Low

Off

To turn the fan on and off / control the speed. Turn the

speed knob on the top of the motor to the porper setting.

Figure 19.

Medium

High

oscillation

To allow the fan to oscillate, push the Knob beside the fan

speed control down. Pull up on the knob if oscillation is

not desired. Figure 20.

figure 19.

figure 20.

figure 21.

adjustment

To adjust the angle the fan is blowing.

1. Loosen the adjustment knob under the Fan Motor

2. Adjust the fan to the angle desired and retighten the

knob to secure the fan at that angle. Figure 21.

When adjusting the height of the fan, always grip the

pole above the adjustment knob firmly to prevent the

telescoping pole from collapsing.

44086-01 20101102

Download from Www.Somanuals.com. All Manuals Search And Download.

maInTenanCe

This fan is permanently lubricated and will not require

additional lubrication (oil) for the life of the fan.

This fan requires little maintenance and contains

no user serviceable parts. DO NOT try to fix

it yourself. Contact qualified service personnel

if servicing is needed.

Before cleaning, turn fan off and unplug from electrical

outlet. Wipe off excess dust with a lintfree cloth. To ensure

adequate air circulation to the motor, keep vents located at

the rear of the motor housing free from dust accumulation.

A vacuum cleaner hose can be used to clean these vents.

DO NOT immerse the fan in water or any other liquid.

CLEANING THE GRILL AND BLADE:

1. Turn the fan off and unplug from the electrical outlet.

2. Disassemble the grills by Loosening the screw holding

the grill ring and remove it from the grills.

3. Two tabs hold the Front Grill and Back Grill together.

Pull the Front Grill forn the back.

4. The blade may be removed by loosening the screw

holding it in place. Grills and blades may be cleaned

with mild soap and water only after they have been

removed from the motor housing.

5. Use a dry or slightly damp lint free cloth to clean

the fan. Use a soft, slightly damp cloth to wipe the

remaining fan parts.

3 DO NOT allow water or any other liquid to get into

the motor housing or base.

3 Reassemble the fan after blades and grills have dried

completely.

3 DO NOT plug the fan into an electrical outlet until it

has been fully reassembled.

44086-01 20101102

Download from Www.Somanuals.com. All Manuals Search And Download.

1. Problem

3 Fan will not oscillate.

Solution

3 Push down on the knob on top of motor housing to

activate oscillation.

2. Problem

3 Can not adjust the angle of the fan.

Solution

3 Loosen the adjustment knob, tilt the fan, then retighten

adjustment knob.

TeChnICal suPPorT

If you have any additional questions or problems with

your Hunter Portable Fan, please call:

USA: 1-888-830-1326

Canada: 1-866-268-1936

Hours of operation are from 7:00 am to 7:00 pm

Monday - Friday and 8:00 am to 5:00 pm on Saturday,

Central Time. You may also contact us over the Internet at

www.hunterfan.com.

WarranTy

The Hunter Fan Company makes the following limited

warranty to the user or consumer purchaser of this Hunter

Portable fan:

If your Hunter Portable Fan motor fails at any time within

five years after the date of sale to you due to a defect in

material or workmanship, labor to repair the defect will

be provided free of charge at our nearest service center

or our Service Department in Memphis, Tennessee. You

will be responsible for labor costs after this one-year

period. The foregoing limited warranty applies only to

the motor itself, and does not apply to electronic controls

such as remote controls, remote control receivers or

transmitters used in conjunction with the motor. These

electronic control items are included in the one year

limited warranty below.

If any part of your Hunter Portable Fan other than the

motor fails at any time with five year after the date of

44086-01 20101102

Download from Www.Somanuals.com. All Manuals Search And Download.

sale to you due to a defect in material or workmanship,

we will repair or, at our option, replace the defective

part free of charge for parts and labor performed at our

nearest service center or at our Service Department in

Memphis, Tennessee.

IF THE USER OR CONSUMER PURCHASER CEASES TO

OWN THE FAN, THIS WARRANTY AND ANY IMPLIED

WARRANTY WHICH THEN REMAINS IN EFFECT,

INCLUDING BUT NOT LIMITED TO ANY IMPLIED

WARRANTY OF MERCHANTABILITY OR FITNESS FOR A

PARTICULAR PURPOSE, ARE VOIDED. NO WARRANTY,

EXPRESSED OR IMPLIED, INCLUDING ANY WARRANTY

OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR

PURPOSE, IS MADE IN RESPECT TO THE GLASS GLOBES

OR LIGHT BULBS OR THE FINISH ON ANY METAL

PORTION OF THE FAN. THIS WARRANTY IS IN LIEU

OF ALL OTHER EXPRESS WARRANTIES. THE DURATION

OF ANY IMPLIED WARRANTY, INCLUDING, BUT

NOT LIMITED TO ANY IMPLIED WARRANTY OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR

PURPOSE, IN RESPECT TO ANY HUNTER FAN MOTOR

OR OTHER FAN PART, IS EXPRESSLY LIMITED TO THE

PERIOD OF THE EXPRESS WARRANTY SET FORTH

ABOVE FOR SUCH MOTORS AND OTHER PARTS.

This warranty is voided if your Hunter Fan is not

purchased and used in the USA.

This warranty excludes and does not cover defects,

malfunctions or failures of any Hunter Portable fan

which were caused by repairs by persons not authorized

by us, use of parts or accessories not authorized by

us, mishandling, improper installation, modifications,

or damage to the Hunter Portable fan while in your

possession, or unreasonable use, including failure to

provide reasonable and necessary maintenance.

To obtain servicing, contact the nearest Hunter authorized

service center or the Hunter Fan Company Service

Department, 7130 Goodlett Farms Pkwy. Suite 400,

Memphis, Tennessee 38016. Please contact us before

shipping your fan to us. If we authorize you to ship it to

us, you will be responsible for all insurance and freight

or other transportation charges to our factory service

center. We will return your Hunter Fan freight prepaid.

Your portable fan should be properly packed to avoid

damage in transit since we will not be responsible for

44086-01 20101102

Download from Www.Somanuals.com. All Manuals Search And Download.

any such damage. Proof of purchase is required when

requesting warranty service. The purchaser must present

sales receipt or other document that establishes proof of

purchase.

IN NO EVENT SHALL HUNTER FAN COMPANY BE

LIABLE FOR CONSEQUENTIAL OR INCIDENTAL

DAMAGES.

SOME STATES DO NOT ALLOW LIMITATIONS ON

HOW LONG AN IMPLIED WARRANTY LASTS OR

THE EXCLUSION OR LIMITATION OF INCIDENTAL

OR CONSEQUENTIAL DAMAGES SO THE ABOVE

LIMITATION MAY NOT APPLY TO YOU.

THE WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS

AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH

VARY FROM STATE TO STATE.

ProduCTs

Fan Company

7130 Goodlett Farms Pkwy., Suite 400

Memphis, Tennessee 38016

To learn more about Hunter

Fan Company products,

please see our Web page at:

www.hunterfan.com

Printed in china and Taiwan

44086-01 20101102

Download from Www.Somanuals.com. All Manuals Search And Download.

Graco High Chair PD162117B User Manual
Harbor Freight Tools Spreader 99623 User Manual
Hario Glass Home Theater Server BGSN 350U User Manual
Havis Shields Automobile C VS 700 EXPL User Manual
Heat Glo LifeStyle Fire Pit 36DV User Manual
Heatiator Indoor Fireplace GC150 User Manual
Hotpoint Dishwasher FDYB 10011 User Manual
Hotpoint Ventilation Hood HX901X User Manual
HP Hewlett Packard Laptop VC4815 User Manual
Humminbird Music Mixer AMX 220 User Manual