Hunter Fan Fan 23347 User Manual

installation and  
operation manual  
for Hunter  
For Your Records and Warranty  
Assistance  
Model Name: _____________________  
Catalog/Model No.: ________________  
Serial No.: ________________________  
Date Purchased: ___________________  
Where Purchased: _________________  
Ceiling Fans  
For reference also attach your receipt or a  
copy of your receipt to the manual.  
Model 23347  
42832-01 • 06/04/08  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Mounting and Optional Accessories  
Understanding Mounting  
Support Brace  
Hunter’s patented mounting system provides you maximum ease in  
installing your fan. is fan was designed to be mounted only on flat  
ceilings and can be used on ceilings less than 8 feet high.  
Low Profile  
Mounting  
Style  
Considering Optional Accessories  
Ceiling  
Outlet Box  
Consider using Hunter’s optional accessories, including a wall-mounted  
or remote speed control. To install and use the accessories, follow  
the instructions included with each product. For quiet and optimum  
performance of your Hunter fan, use only Hunter speed controls.  
Low Profile Mounting fits close to the  
ceiling, recommended for ceilings less  
than 8 feet high  
CAUTION: To reduce the risk of  
personal injury, attach the fan directly  
to the support structure of the building  
according to these instructions, and use  
only the hardware supplied.  
3
42832-01 • 06/04/08 • Hunter Fan Company  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1 • Getting Ready  
To install a ceiling fan, be sure you can do the following:  
• Locate the ceiling joist or other suitable support in ceiling.  
• Drill holes for and install wood screws.  
• Identify and connect electrical wires.  
• Lift 40 pounds.  
If you need help installing the fan, your Hunter fan dealer can direct  
you to a licensed installer or electrician.  
Gathering the Tools  
You will need the following tools for installing the fan:  
• Electric drill with 9/64” bit  
• Standard screwdriver (magnetic tip recommended)  
• Phillips-head screwdriver (magnetic tip recommended)  
• Wrench or pliers  
• Ladder (height dependent upon installation site)  
Installing Multiple Fans?  
If you are installing more than  
one fan, keep the fan blades and  
blade irons (if applicable) in sets,  
as they were shipped.  
Checking Your Fan Parts  
Carefully unpack your fan to avoid damage to the fan parts. Refer to  
the included Parts Guide. Check for any shipping damage to the motor  
or fan blades. If any parts are missing or damaged, contact your Hunter  
dealer or call Hunter Technical Support Department at 888-830-1326.  
Preparing the Fan Site  
Before you begin installing the fan, follow all the instructions in  
the pullout sheet called “Preparing the Fan Site.” Proper ceiling fan  
location and attachment to the building structure are essential for  
safety, reliable operation, maximum efficiency, and energy savings.  
4
42832-01 • 06/04/08 • Hunter Fan Company  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2 • Installing the Hanger Bracket  
CAUTION: To avoid possible electrical shock, before installing your fan,  
Hanger  
disconnect the power by turning off the circuit breakers to the outlet box  
and associated wall switch location. If you cannot lock the circuit breakers  
in the off position, securely fasten a prominent warning device, such as a  
tag, to the service panel.  
Bracket  
Canopy  
Screw  
2-1. Drill two pilot holes into the wood support structure through the  
outermost holes in the outlet box. e pilot holes should be 9/64”  
in diameter.  
Step 2-2  
Canopy Screw  
2-2. Partially install two canopy screws in the holes on each end of the  
hanger bracket, as shown in the figure to the right.  
2-3. Your fan comes with four mounting isolators. Position the  
isolators between the hanger bracket and ceiling by inserting the  
raised areas on each isolator into the holes in the hanger bracket.  
Isolator  
2-4. read the lead wires from the outlet box down through the hole  
in the middle of the hanger bracket.  
Step 2-3  
2-5. Align the slotted holes in the hanger bracket with the pilot holes  
you drilled in the wood support structure.  
Note: e isolators should be flush against the ceiling.  
2-6. Place a flat washer on each of the two 3” wood screws and pass  
the screws through the slotted holes in the hanger bracket into  
the pilot holes you drilled.  
Tighten the screws into the 9/64” pilot holes; do not use lubricants  
on the screws. Do not over tighten.  
Flat Washer  
3” Wood Screw  
Steps 2-4 – 2-6  
5
42832-01 • 06/04/08 • Hunter Fan Company  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3 • Assembling and Hanging the Fan  
3-1. Position the square hanger so that the green ground wire attached  
Step 3-1  
to the square faces out of the large opening in the metal bracket.  
3-2. Holding the wires out of the way, lift the motor assembly and  
place the square hanger into the opening in the ceiling plate.  
WARNING: Make sure the square hanger can not rotate in the  
metal bracket. Failure to do so could result in the fan falling.  
3-3. Install two locking screws through the holes in the side of the  
metal bracket to secure the square hanger.  
Square  
Hanger  
Motor  
Assembly  
Green  
Ground Wire  
Step 3-2  
Green  
Ground Wire  
Step 3-3  
Locking Screw  
6
42832-01 • 06/04/08 • Hunter Fan Company  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4 •Wiring the Fan  
All wiring must be in accordance with national and local electrical  
codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a  
qualified electrician.  
4-1. Disconnect the power by turning off the circuit breakers to the  
outlet box and associated wall switch location.  
4-2. To connect the wires, hold the bare metal leads together and place a  
wire connector over them, then twist clockwise until tight.  
CAUTION: Be sure no bare wire or wire strands are visible after  
making connections.  
4-3. Connect the wires as follows:  
• e green or bare ground wire from the ceiling to the green ground  
wire from the ceiling plate and the green ground wire from the fan  
• e white (common) power wire from the ceiling to the white wire  
Step 4-3  
from the fan  
• e black power wire from the ceiling to both the black wire from  
the fan and the black/white wire from the fan  
4-4. Push all wires and wire connectors back through the ceiling plate hole  
into the outlet box.  
Wire  
Connector  
7
42832-01 • 06/04/08 • Hunter Fan Company  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5 • Installing the Motor Housing  
Step 5-1  
5-1. Place the fan housing over the motor.  
5-2. Align the keyholes in the fan housing with the two partially  
installed canopy screws in the hanger bracket. Rotate the fan  
housing to situate the screws in the narrow ends of the keyholes.  
Motor  
Fan Housing  
5-3. Install the two remaining canopy screws into the holes in the fan  
housing and into the hanger bracket. Securely tighten all screws.  
Step 5-3  
Canopy  
Screw  
8
42832-01 • 06/04/08 • Hunter Fan Company  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6 • Assembling the Blades  
Hunter fans use several styles of fan blade irons (brackets that hold the  
blade to the fan).  
6-1. Your fan may include blade grommets. If your fan has grommets,  
Step 6-1 (Detail)  
insert them by hand into the holes on the blades.  
6-2. Attach each blade to a blade iron using three blade assembly  
screws. If you used grommets, the blades may appear slightly loose  
after screws are tightened. is is normal.  
6-3. Remove the blade mounting screws and rubber shipping bumpers  
from the motor. Note: Some blade mounting screws are installed  
in the motor to secure shipping blocks.  
6-4. For each blade, insert one blade mounting screw through the  
blade iron, and attach lightly to the fan. Insert the second blade  
mounting screw, then securely tighten both mounting screws.  
Grommet  
Steps 6-1 – 6-2  
Blade Assembly  
Screws  
Use with grommet  
Use without grommet  
Blade  
Mounting  
Screw  
Step 6-4  
9
42832-01 • 06/04/08 • Hunter Fan Company  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7 • Installing the Switch Housing  
7-1. To attach the upper switch housing, partially install two housing  
assembly screws into the switch housing mounting plate.  
7-2. Feed the upper plug connector through the center opening of the  
housing.  
7-3. Align the keyhole slots in the housing with the housing assembly  
screws.  
7-4. Turn the housing counterclockwise until the housing assembly  
screws are firmly situated in the narrow end of the keyhole slots.  
Install the remaining screw into the housing. Tighten all three  
screws firmly.  
CAUTION: Make sure the upper switch housing is securely attached  
to the switch housing mounting plate. Failure to properly attach and  
tighten all three assembly screws could result in the switch housing  
fixture falling.  
Steps 7-1 – 7-4  
Housing  
Upper  
Switch  
Housing  
Assembly  
Screw  
7-5. To attach the lower switch housing, connect the upper plug  
connector from the motor to the lower plug connector in the  
lower switch housing assembly.  
Note: Both plug connectors are polarized and will only fit together  
one way. Make sure the connectors are properly aligned before  
connecting them. Incorrect connection could cause improper  
operation and damage to the product.  
7-6. Place the lower switch housing assembly over the upper switch  
housing. Align the side screw holes in the upper and lower switch  
housings. Attach the lower switch housing to the upper switch  
housing with three housing assembly screws.  
Plug  
Connector  
Note: You can customize your Hunter fan with a number of accessory  
light kits.  
Steps 7-5 – 7-6  
Lower  
Switch  
Housing  
Housing  
Assembly  
Screw  
10  
42832-01 • 06/04/08 • Hunter Fan Company  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8 • Operating and Cleaning Your Ceiling Fan  
8-1. Turn on electrical power to the fan.  
8-2. e fan pull chain controls power to the fan. e pull chain has  
four settings in sequence: High, Medium, Low and Off.  
• Pull the chain slowly to change settings.  
• Release slowly to prevent the chain from recoiling into the  
blades.  
• e chain uses a breakaway connector that separates if the  
chain is jerked. If this happens, simply reinsert the chain into  
the connector.  
8-3. Ceiling fans work best by blowing air downward (counterclockwise  
blade rotation) in warm weather to cool the room with a direct  
breeze. In winter, having the fan draw air upward (clockwise blade  
rotation) will distribute the warmer air trapped at the ceiling  
around the room without causing a draft.  
In warm weather, use  
downward air flow pattern  
8-4. For cleaning finishes, use a soft brush or lint-free cloth to prevent  
scratching. A vacuum cleaner brush nozzle can remove heavier  
dust. Remove surface smudges or accumulated dirt and dust using  
a mild detergent and a slightly dampened cloth. You may use  
an artistic agent, but never abrasive cleaning agents as they will  
damage the finish.  
8-5. Clean wood finish blades with a furniture polishing cloth.  
Occasionally, apply a light coat of furniture polish for added  
protection and beauty. Clean painted and high-gloss blades in the  
same manner as the fan finish.  
In cold weather, use upward  
air flow pattern  
To Change Airflow Direction  
Turn the fan off and let it come to a complete  
stop. Slide the reversing switch on the fan to the  
opposite position. Restart fan.  
Reversing  
Switch  
11  
42832-01 • 06/04/08 • Hunter Fan Company  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9 • Troubleshooting  
Problem: Nothing happens; fan does not move.  
1. Turn power on, replace fuse, or reset breaker.  
2. Loosen canopy, check all connections according to the wiring the  
fan section.  
3. Check the plug connection in the switch housing.  
4. Push motor reversing switch firmly left or right to ensure that the  
switch is engaged.  
5. Pull the pull chain to ensure it is on.  
6. Remove the shipping bumpers.  
Problem: Noisy operation.  
1. Tighten the blade bracket screws until snug.  
2. Tighten the blade screws until snug.  
3. Check to see if the blade is cracked. If so, replace all the blades.  
4. Change to an approved speed control.  
5. Be sure that the glass is secure.  
6. Check and tighten the screws in the switch housing mounting  
plate and in the upper and lower switch housing.  
Problem: Excessive wobbling.  
1. If your fan wobbles when operating, use the enclosed balancing kit  
and instructions to balance the fan.  
2. Tighten all blade and/or blade iron screws.  
If you need parts or service assistance, please call  
888-830-1326 or visit us at our Web site at  
Hunter Fan Company  
2500 Frisco Avenue  
Memphis, Tennessee 38114  
12  
42832-01 • 06/04/08 • Hunter Fan Company  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Graco Inc Paint Sprayer ti5272a User Manual
Grizzly Coffee Grinder T10023 User Manual
Grizzly Paint Sprayer H8115 User Manual
Grizzly Saw G0640X User Manual
Guardian Technologies Vacuum Cleaner GGU300 User Manual
Haicom Recording Equipment HI 602 User Manual
Haier Water Dispenser WDNS045 User Manual
Havis Shields Stereo System S CM 112 IMP 1 User Manual
Hotpoint Washer WMEF 742 User Manual
Humax Satellite TV System F2 FOXT User Manual