767 GPS Chartplotter
Operations Manual
531427-1_D
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
How Sonar Works
1
DualBeam PLUS™ Sonar ............................................................................................................................................ 3
QuadraBeam™ Sonar (with optional-purchase QuadraBeam™ transducer) ............................................ 3
WideSide® Sonar (with optional-purchase WideSide® transducer) ............................................................ 4
How GPS and Cartography Work
5
Multi-Media Card (MMC)/SD Slot
6
Software Updates ........................................................................................................................................................ 6
What’s On the Display
7
Views
9
Sonar View.................................................................................................................................................................... 10
Understanding Sonar History ................................................................................................................................ 11
Real Time Sonar (RTS®) Window............................................................................................................................ 11
Freeze Frame ................................................................................................................................................................ 12
Bottom Presentation ................................................................................................................................................ 12
Sonar Zoom View ...................................................................................................................................................... 14
200/83 kHz Split Sonar View ................................................................................................................................ 15
Big Digits View ............................................................................................................................................................ 15
Circular Flasher View ................................................................................................................................................ 16
Screen Snapshot View .............................................................................................................................................. 16
Side Beam View (with optional-purchase QuadraBeam™ transducer) .................................................... 17
WideSide® View (with optional-purchase WideSide® transducer).............................................................. 19
Bird's Eye View............................................................................................................................................................ 20
Chart View .................................................................................................................................................................... 21
Combo View ................................................................................................................................................................ 22
View Orientation........................................................................................................................................................ 22
Viewing Cartography
23
Introduction to Navigation
24
Waypoints, Routes and Tracks .............................................................................................................................. 24
Save, Edit or Delete a Waypoint............................................................................................................................ 25
Navigate to a Waypoint or Position .................................................................................................................... 26
Add a Waypoint Target or Trolling Grid ............................................................................................................ 27
Save, Edit or Delete a Route .................................................................................................................................. 28
Save or Clear a Current Track ................................................................................................................................ 28
Edit, Delete or Hide Saved Tracks ........................................................................................................................ 29
ii
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Key Functions
29
POWER/LIGHT Key .................................................................................................................................................. 29
VIEW Key ...................................................................................................................................................................... 30
INFO Key........................................................................................................................................................................ 30
MENU Key .................................................................................................................................................................... 30
4-WAY Cursor Control Key ...................................................................................................................................... 31
MARK Key ...................................................................................................................................................................... 31
GOTO Key ...................................................................................................................................................................... 31
ZOOM (+/-) Key .......................................................................................................................................................... 32
EXIT Key ........................................................................................................................................................................ 32
Accessory Bus
32
33
34
36
Powering Up the Unit
The Menu System
Start-Up Options Menu
Normal Operation...................................................................................................................................................... 36
Simulator .................................................................................................................................................................... 36
System Status ............................................................................................................................................................ 37
Self Test.......................................................................................................................................................................... 37
Accessory Test.............................................................................................................................................................. 37
GPS Diagnostic View ................................................................................................................................................ 38
PC Connect (with PC Connect cable only) .......................................................................................................... 38
Sonar X-Press™ Menu (Sonar views only)
39
Side (WideSide® transducer: WideSide® view only)........................................................................................ 40
Sensitivity .................................................................................................................................................................... 41
Upper Range (Advanced: Sonar, Split Sonar, Big Digits and Circular Flasher views only) .................. 42
Lower Range ................................................................................................................................................................ 43
Side Beam Range (WideSide® transducer: WideSide® view only) .............................................................. 44
Chart Speed ................................................................................................................................................................ 44
Bottom View................................................................................................................................................................ 45
Bottom Range (Sonar Zoom view only when Bottom Lock is On) .............................................................. 45
Bottom Lock (Sonar Zoom view only).................................................................................................................. 46
Cancel Navigation (only when navigating) ...................................................................................................... 46
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Navigation X-Press™ Menu (Navigation views only)
47
Waypoint [Name] (Only with an active cursor on a waypoint).................................................................. 48
Cursor To Waypoint (Chart or Combo view only)............................................................................................ 49
Save Current Track .................................................................................................................................................... 49
Clear Current Track.................................................................................................................................................... 49
Save Current Route (only when navigating) .................................................................................................... 50
Skip Next Waypoint (only when navigating) .................................................................................................. 50
Cancel Navigation (only when navigating) ...................................................................................................... 50
Remove Target (only if Target is Active) ............................................................................................................ 51
Remove Grid (only if Grid is Active) ...................................................................................................................... 51
Sonar Window (Combo view only)........................................................................................................................ 51
Waypoint [Name] (Most recently-created waypoint) .................................................................................... 52
Screen Snapshot X-Press™ Menu (Screen Snapshot view only)
53
Delete Image (optional-purchase MMC/SD card only).................................................................................. 53
Delete All Images (optional-purchase MMC/SD card only) ........................................................................ 53
Sonar Menu Tab
54
Beam Select ................................................................................................................................................................ 55
Fish ID+TM ...................................................................................................................................................................... 56
Fish ID Sensitivity ...................................................................................................................................................... 57
Real Time Sonar (RTS®) Window .......................................................................................................................... 57
Zoom Width ................................................................................................................................................................ 58
83 kHz Sensitivity (Advanced)................................................................................................................................ 58
455 kHz Balance (Advanced, with QuadraBeamTM transducer) .................................................................. 58
WideSide® Sensitivity (Advanced, with WideSide® transducer)s .............................................................. 59
Depth Lines (Advanced) .......................................................................................................................................... 60
Surface Clutter (Advanced)...................................................................................................................................... 61
Noise Filter (Advanced) ............................................................................................................................................ 62
Max Depth (Advanced) ............................................................................................................................................ 62
Water Type (Advanced)............................................................................................................................................ 63
Transducer Select ...................................................................................................................................................... 63
Navigation Menu Tab
64
Current Track .............................................................................................................................................................. 65
Saved Tracks ................................................................................................................................................................ 65
Waypoints.................................................................................................................................................................... 66
Routes ............................................................................................................................................................................ 67
iv
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Chart Orientation ...................................................................................................................................................... 67
North Reference.......................................................................................................................................................... 68
Grid Rotation .............................................................................................................................................................. 68
Trackpoint Interval .................................................................................................................................................... 68
Track Min Distance (Advanced) ............................................................................................................................ 69
Map Datum (Advanced) .......................................................................................................................................... 69
Course Projection Line .............................................................................................................................................. 70
Export All Nav Data (Advanced) ............................................................................................................................ 70
Delete All Nav Data (Advanced) ............................................................................................................................ 70
Chart Menu Tab
71
Chart Detail Level........................................................................................................................................................ 72
Map Borders ................................................................................................................................................................ 72
Lat/Lon Grid ................................................................................................................................................................ 73
Spot Soundings ............................................................................................................................................................73
Set Simulation Position (Advanced) .................................................................................................................... 73
Set Map Offset (Advanced) .................................................................................................................................... 74
Clear Map Offset (Advanced).................................................................................................................................. 74
Alarms Menu Tab
75
Depth Alarm ................................................................................................................................................................ 76
Fish ID Alarm................................................................................................................................................................ 76
Low Battery Alarm...................................................................................................................................................... 77
Temp Alarm.................................................................................................................................................................. 77
Off Course Alarm ...................................................................................................................................................... 78
Arrival Alarm .............................................................................................................................................................. 78
Drift Alarm .................................................................................................................................................................. 79
Alarm Tone .................................................................................................................................................................. 79
Setup Menu Tab
80
Units - Depth ................................................................................................................................................................ 81
Units - Temp (International only) .......................................................................................................................... 81
Units - Distance............................................................................................................................................................ 81
Units - Speed ................................................................................................................................................................ 82
User Mode .................................................................................................................................................................... 82
Language (International only)................................................................................................................................ 82
Triplog Reset .............................................................................................................................................................. 83
Restore Defaults ........................................................................................................................................................ 83
Select Readouts (Advanced, Sonar view only) .................................................................................................. 84
v
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Depth Offset (Advanced) ........................................................................................................................................ 85
Temp Offset (Advanced).......................................................................................................................................... 85
Speed Calibration (Advanced, with Temp/Speed only) ................................................................................ 85
Local Time Zone (Advanced) .................................................................................................................................. 86
Daylight Saving Time (Advanced) ........................................................................................................................ 86
Position Format (Advanced) .................................................................................................................................. 87
Time Format (Advanced, International only) .................................................................................................... 87
Date Format (Advanced, International only) .................................................................................................... 87
NMEA Output (Advanced) ...................................................................................................................................... 88
Sonar .............................................................................................................................................................................. 88
Views Menu Tab
89
Accessories Menu Tab
90
Using Screen Snapshot............................................................................................................................................ 90
Troubleshooting
92
700 Series™ Doesn’t Power Up ............................................................................................................................ 92
700 Series™ Defaults to Simulator with a Transducer Attached.............................................................. 92
Display Problems........................................................................................................................................................ 93
Finding the Cause of Noise .................................................................................................................................... 94
700 Series™ Fishing System Accessories
Specifications
95
96
97
Glossary
Sonar Terms............................................................................................................................................................ 97
GPS & Navigation Terms .................................................................................................................................. 105
Contact Humminbird®
110
NOTE: Entries in this Table of Contents which list (International only) are only available on
products sold outside of the U.S. by our authorized International Distributors. To obtain a list of
authorized International Distributors, please visit our website at www.humminbird.com or
contact our Customer Resource Center at 1-800-633-1468 to locate the distributor nearest you.
NOTE: Entries in this Table of Contents which list (with PC Connect Cable Only) or (with Optional-
Purchase QuadraBeamTM/WideSide® Transducer) or (with Temp/Speed Only) require the
purchase of separate accessories. You can visit our website at www.humminbird.com to order
these accessories online or contact our Customer Resource Center at 1-800-633-1468
.
vi
Download from Www.Somanuals.com. All Manuals Search And Download.
How Sonar Works
Sonar technology is based on sound waves. The 700 Series™ Fishing System uses sonar to
locate and define structure, bottom contour and composition, as well as depth directly below
the transducer.
Your 700 Series™ Fishing System sends a sound wave signal and determines distance by
measuring the time between the transmission of the sound wave and when the sound wave is
reflected off of an object; it then uses the reflected signal to interpret location, size, and
composition of an object.
Sonar is very fast. A sound wave can travel from the surface to a depth of 240 ft
(70 m) and back again in less than 1/4 of a second. It is unlikely that your boat can "outrun"
this sonar signal.
SONAR is an acronym for SOund and NAvigation Ranging.
Sonar utilizes precision sound pulses or "pings" which are
emitted into the water in a teardrop-shaped beam.
The sound pulses "echo" back from objects in the water such
as the bottom, fish and other submerged objects. The
returned echoes are displayed on the LCD screen. Each time a
new echo is received, the old echoes are moved across the LCD,
creating a scrolling effect.
When all the echoes are viewed side by side, an easy to
interpret "graph" of the bottom, fish and structure appears.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
The sound pulses are transmitted at various frequencies
depending on the application. Very high frequencies (455kHz)
are used for greatest definition but the operating depth is
limited. High frequencies (200kHz) are commonly used on
consumer sonar and provide a good balance between depth
performance and resolution. Low frequencies (83kHz) are
typically used to achieve greater depth capability.
The power output is the amount of energy generated by the
sonar transmitter. It is commonly measured using two
methods:
• Root Mean Square (RMS) measures power output over
the entire transmit cycle.
• Peak to Peak measures power output at the highest
points.
The benefits of increased power output are the ability to
detect smaller targets at greater distances, ability to
overcome noise, better high speed performance and
enhanced depth capability.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
DualBeam PLUS™ Sonar
Your 700 Series™ Fishing System uses a 200/83 kHz DualBeam
PLUS™ sonar system with a wide (60°) area of coverage.
DualBeamPLUS™sonarhasanarrowlyfocused20°centerbeam,
surrounded by a second beam of 60°, expanding your coverage
to an area equal to your depth. In 20 feet of water, the wider
beam covers an area 20 feet wide. DualBeam PLUS™ sonar
returnscanbeblendedtogether, viewedseparatelyorcompared
side-by-side. DualBeam PLUS™ is ideal for a wide range of
conditions - from shallow to very deep water in both fresh and
salt water. Depth capability is affected by such factors as boat
speed, wave action, bottom hardness, water conditions and
transducer installation.
QuadraBeam™ Sonar
(with optional-purchase QuadraBeamTM transducer)
Your 700 Series™ Fishing System also supports
QuadraBeam™ sonar with the purchase of an
additional QuadraBeam™ transducer. QuadraBeam™
35° 60° 20°
35°
455 kHz
455 kHz
sonar provides an extremely wide 90° area of
coverage. QuadraBeam™ starts with two 45° 455 kHz
beams for a continuous 90° of uninterrupted side to
side coverage to 160 feet. These Side Structure
locating beams reveal fish and structure to the left
and right of your boat near the bottom. For structure
directly below your boat, Quadrabeam™ uses
DualBeam PLUS™ technology.
200 kHz
83 kHz
90° Total Coverage
Bottom Coverage 2 x Depth
=
3
Download from Www.Somanuals.com. All Manuals Search And Download.
WideSide® Sonar
(with optional-purchase WideSide® transducer)
Your 700 Series™ Fishing System also supports
WideSide® sonar with the purchase of an additional
WideSide® transducer. The WideSide® transducer is a
specialized "side-looking" transducer that is extremely
useful for bank fishing or looking for bait fish in open
water. The WideSide® transducer uses three different
sonar elements that transmit signals to the left, right
and straight down from your boat. The downward
beamis200kHzwitha24°areaofcoverage. Thisbeam
maintains a continuous digital depth readout from the
bottom directly beneath your boat. The side beams are
455 kHz with a 16° area of coverage. The side-looking
elements can be used independently, or together to
locate targets near the surface of the water on either
side of your boat.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
How GPS and Cartography Work
Your 700 Series™ Fishing System also supports GPS and chartplotting, and uses GPS and sonar
to determine your position, display it on a grid, and provide detailed underwater information.
The Global Positioning System (GPS) is a satellite navigation system designed and maintained
by the U.S. Department of Defense. GPS was originally intended for military use; however,
civilians may also take advantage of its highly accurate position capabilities, typically within
+/- 10 meters, depending on conditions. This means that 95% of the time, the GPS receiver
will read a location within 10 meters of your actual position. Your GPS Receiver also uses
information from WAAS (the Wide Area Augmentation System), EGNOS (the European
Geostationary Navigation Overlay Service), and MSAS (the MTSAT Satellite Augmentation
System) satellites if they are available in your area.
GPS uses a constellation of 24 satellites that continually send
radio signals to the earth. Your present position is determined
by receiving signals from up to 16 satellites and measuring the
distance from the satellites.
All satellites broadcast a uniquely coded signal once per
second at exactly the same time. The GPS receiver on your
boat receives signals from satellites that are visible to it.
Based on time differences between each received signal, the
GPS receiver determines its distance to each satellite. With
distances known, the GPS receiver mathematically
triangulates its own position. With once per second updates,
the GPS receiver then calculates its velocity and bearing.
The GPS Receiver included with your 700 Series™ Fishing System, allows you to cosmbine easy-to-
use FishingGPS™ chartplotter and navigation capabilities with advanced fishfinding. The
following GPS functionality is currently supported by the 700 Series™ Fishing System when it is
connected to the included GPS receiver:
•
•
•
•
•
View current position
View current track (breadcrumb trail)
View precision speed and heading from your GPS receiver
Save tracks, waypoints and routes
Travel a route and navigate from one waypoint to the next.
Your 700 Series™ supports Navionics® Gold, HotMaps™ and HotMaps™Premium on MMC or SD
card media.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE: Your 700 Series™ does not support Navionics® Classic Charts, only Navionics® Gold,
HotMaps™, and HotMaps™ Premium.
Your unit also comes with a built-in Uni-Map™ with a more detailed map of North America
(Domestic models) or a more detailed map of Europe and Southeast Asia, including Australia and
New Zealand (International models).
Your 700 Series™ uses the GPS Receiver to determine the position of the boat automatically, and
uses the zoom level settings on a particular view to select the best chart to display. See Viewing
Cartography for more information.
Multi-Media Card (MMC)/SD Slot
Your 700 Series™ Fishing System also has a multi-media
card (MMC)/SD slot that is used to insert optional-
purchase cards containing additional detailed maps. If
you insert an MMC/SD that contains a more detailed
chart for a particular location, your 700 Series™ Fishing
System will retrieve that chart and display it
Inserting an MMC/SD
into the Card Slot
automatically. Use the illustration to locate the position
of the MMC/SD slot cover, remove the MMC/SD slot
cover, then insert the MMC/SD into the slot. The label on
the MMC/SD should face toward the right side of the unit. Press down on the card until it
clicks into place, then replace the slot cover, making certain that the gasket is present and
positioned correctly before re-installing the cover, then replace and tighten snugly - do NOT
overtighten, as this will not improve water resistance, and may damage the cover.
Software Updates
Use the MMC/SD slot to update the software version of your control head. To update the
software in your control head, plug in the appropriate MMC/SD card that contains a software
update file; the unit will recognize it, will tell you what software version your control
head is currently running, and will ask you if you want to update the software in the unit
to match that on the MMC/SD card. You can obtain software updates from the
www.humminbird.com website.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
What’s On the Display
The 700 Series™ can display a variety of useful information about the area under and adjacent to your
Depth - water depth; can be set to alarm when the
Cursor - available in Freeze Frame and can be
depth of a sonar return and bottom depth
water becomes too shallow.
Speed - if a Temp/Speed accessory or GPS Receiver
is attached, the 700 Series™ can display the speed
of the boat, and can keep a Triplog of nautical or
statute miles traveled.
Temperature - water surface temperature.
Timer - elapsed time with Temp/Speed Accessory
or GPS Receiver.
Distance - distance traveled with Temp/Speed
Accessory or GPS Receiver.
Average Speed - average speed reading with
Temp/Speed Accessory or GPS Receiver.
Bait Ball
Hard Bottom
Rocky Bottom
Second Sonar Return - when the sonar signal
bounces between the bottom and the surface of
the water and back again. Use the appearance of
the second return to determine bottom hardness.
Hard bottoms will show a strong second return,
while soft bottoms will show a very weak one or
none at all.
Cursor Dialog Box - indicates cursor depth on
Longitude of the cursor position is shown,
be marked at the cursor position for later
NOTE: Entries in this view that list (with Temp/Speed or GPS Receiver) are available if either device is connected
receiver will be displayed on the view.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
boat, including the following items:
positioned in the Sonar View to provide
below the cursor.
Structure - where fish may be hiding.
200 kHz, Narrow Beam Shaded Fish Symbol
83 kHz, Wide Beam Hollow Fish Symbol
Thermoclines - layers of water with different
temperatures that appear at different depths and
different times of the year. A thermocline typically
appears as a continuous band of many gray levels
moving across the display at the same depth.
Fish - fish are displayed as arches and/or fish
icons, and the unit can be set to alarm when a
fish of a certain size is detected. When a target is
detected and Fish ID+TM is on, a Fish ID+TM symbol
with depth is displayed. The size of the symbol
shows the intensity of the sonar return. The unit
will clearly show schools of Bait Fish as "clouds"
of different shapes and sizes, depending on the
number of fish and boat speed.
Soft Bottom
RTS® (Real Time Sonar) Window
the display and the depth of the bottom directly below the cursor. In addition, the Latitude and
the distance to travel to the cursor position and the bearing to the cursor position. A waypoint can
retrieval and use.
to the 700 Series™ Fishing System. If both devices are connected, then only the information from the GPS
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Views
The views available on your 700 Series™ Fishing System are:
Sonar views:
Navigation views:
• Sonar View
• Zoom View
• Bird’s Eye View
• Chart View
• 200/83 kHz Split Sonar View
• Big Digits View
• Combo View.
• Circular Flasher View
• Screen Snapshot View
• Side Beam View
• WideSide® View.
NOTE: When you change any menu settings that affect the sonar, the view will update
immediately (i.e. you don’t have to exit the menu to apply the change to the screen). For instance,
by switching between "Inverse" and "Structure ID®" from the X-PressTM menu, it is possible to quickly
alternate between the two viewing methods.
NOTE: Side Beam View and WideSide® View require the purchase of the QuadraBeamTM
transducer for the Side Beam View and the WideSide® transducer for the WideSide® View. You can
visit our website at www.humminbird.com to order these accessories online or contact our
Customer Resource Center at 1-800-633-1468.
Sonar View is the default view. When the VIEW key is pressed, the display cycles through the
available views. When the EXIT key is pressed, the display cycles through the available views in
reverse order. Any view can be hidden or displayed as part of the view rotation using the Views
Menu tab.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Sonar View
Sonar View presents a historical log of sonar returns. Depth is always displayed. Readouts for
temperature and speed are automatically displayed if the appropriate accessory is connected. The
most recent sonar returns are charted on the right side of the window; as new information is
received, the older information is moved across the display to the left. A Digital Depth Readout is
displayed in the upper left corner. A scale with Upper and Lower Depth Range readouts appears
along the right edge of the Sonar View. The scale indicates the distance from the surface of the
water to a depth range sufficient to show the bottom. Depth Range is automatically selected to
keep the bottom visible on the display, although you can adjust it manually as well (see Sonar
X-Press™ Menu). Six additional Digital Readouts display information from optional-purchase
accessories. These information boxes can be customized to show only the information desired
(see Setup Menu Tab, Select Readouts).
Sonar View
Upper Depth
Range
Depth
RTS® Window
Temperature
Cursor
Triplog
Sonar History
Window
Cursor
Dialog Box
Lower Depth
Range
NOTE: If the Depth number is flashing, it means that the unit is having trouble locating the bottom.
This usually happens if the water is too deep, the transducer is out of the water, the boat is moving
too fast, or for any other reason that the unit can’t accurately receive continuous data.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Understanding Sonar History
It is important to understand the significance of the 700 Series™
Fishing System display. The display does NOT show a literal
3-dimensional representation of what is under the water. Each
vertical band of data received by the control head and plotted on
the display represents something that was detected by a sonar
return at a particular time. As both the boat and the targets (fish)
may be moving, the returns are only showing a particular
segment of time when objects were detected, not exactly where
those objects are in relation to other objects shown on the display.
Real Time Sonar (RTS®) Window
A Real Time Sonar (RTS®) Window appears on the right side of the display in the Sonar View only.
The RTS® Window always updates at the fastest rate possible for depth conditions and shows only
the returns from the bottom, structure and fish that are within the transducer beam. The RTS®
Window plots the depth and intensity of a sonar return. (See Sonar Menu: RTS® Window) .
The Narrow RTS® Window
indicates the sonar intensity
through the use of grayscale.
The grayscale used matches
the bottom view grayscale
setting used in the sonar
history window (i.e. Inverse,
StructureID®, WhiteLine®,
Bottom Black). The depth of
the sonar return is indicated
by the vertical placement of
the return on the display
depth scale.
The Wide RTS® Window in-
dicates the sonar intensity
through the use of a bar
graph. The length of the
plotted return provides an
indication of whether the
return is weak or strong. The
depth of the sonar return is
indicated by the vertical
placement of the return on
the display depth scale. The
Wide RTS® Window does not
make use of grayscale.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Freeze Frame
Freeze Frame - Pressing any arrow on the 4-WAY Cursor Control key will freeze the screen and a
cursor will be displayed on the screen. The cursor can be positioned on the display using the
4-WAY Cursor Control key to determine the depth of any sonar return. The RTS® Window
continues to update in Freeze Frame. In addition, see the effects of menu setting changes with
Instant Image Update. Pressing EXIT will exit Freeze Frame and the display will start to scroll.
Freeze Frame is available in the Sonar, Sonar Zoom, and 200/83 kHz Split Sonar Views.
Bottom Presentation
As the boat moves, the unit charts the changes in depth on the display to create a profile of the
Bottom Contour. The type of bottom can be determined from the return charted on the display.
A Hard Bottom such as compacted sediment or flat rock appears as a thinner line across the
display. A Soft Bottom such as mud or sand appears as a thicker line across the display. Rocky
Bottoms have a broken, random appearance.
Bottom Contour Profile with RTS® Window.
Hard Bottom
Soft Bottom
Rocky Bottom
The sonar returns from the bottom, structure and fish can be represented as either Inverse
(default), WhiteLine®, Structure ID®, or Bottom Black. See Sonar X-Press™ Menu: Bottom View for
details on how to set the bottom view.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Inverse is a method where weak returns are shown with
dark pixels and strong returns with lighter pixels. This has
the benefit of ensuring that weak signals will be clearly
visible on the display.
Structure ID® represents weak returns as light pixels and
strong returns as dark pixels. This has the benefit of ensuring
that strong returns will be clearly visible on the display.
WhiteLine® highlights the strongest sonar returns in white,
resulting in a distinctive outline. This has the benefit of
clearly defining the bottom on the display.
Bottom Black displays all pixels below the bottom contour
as black, regardless of signal strength. This has the benefit of
providing a high contrast between the bottom and other
sonar returns on the display. Any targets such as fish,
structure and thermoclines will be shown using the
Structure ID® method.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Sonar Zoom View
Sonar Zoom View increases the displayed resolution to separate sonar returns that are very close
together, such as those caused by fish suspended close to the bottom or within structure. In Zoom
View, the display is split to show a narrow slice of the full range view on the right and the zoomed
view on the left. The full range view on the right also contains the Zoom Preview Box that shows
what part of the full range view is shown in zoom view on the left; the Zoom Preview Box tracks
the bottom in the full range view.
As the depth changes, the zoomed view updates automatically to display a magnified image of
the bottom. The Zoom Preview Box shows where the zoomed view is in relation to the full range
view. The Zoom Level, or magnification, is displayed in the lower left corner and can be changed
to suit conditions (see Sonar X-Press™ Menu: Zoom Level). Upper and Lower Zoom Depth Range
numbers indicate the depth of the water which is being viewed.
Digital depth is displayed in the upper left hand corner. The digital readouts in the Sonar Zoom
View cannot be customized; therefore, information such as water temperature and voltage are
unavailable in the Sonar Zoom View.
Sonar Zoom View
Upper Depth
Range, Full
Range View
Depth
Upper Depth
Range, Zoom View
Full Range
View
Zoomed
View
Zoom
Preview Box
Zoom Level
Lower Depth
Range, Full
Range View
Lower Depth Range,
Zoom View
14
Download from Www.Somanuals.com. All Manuals Search And Download.
200/83 kHz Split Sonar View
Split Sonar View displays sonar returns from the 83 kHz wide beam on the left side of the screen and
displays sonar returns from the 200 kHz narrow beam on the right side of the screen. Depth is always
displayed in the upper left hand corner. You can use the Split Sonar View to make side by side
comparisons between the sonar returns from the 83 kHz wide beam and the 200 kHz narrow beam.
The digital readouts in the Split Sonar View cannot be customized; therefore, information such as
water temperature and voltage are unavailable in the Split Sonar View.
200/83 kHz Split Sonar View
Upper Depth
Range
Depth
200 kHz
Sonar History
Window
83 kHz
Sonar History
Window
Lower Depth Range
Big Digits View
Big Digits View provides digital data in a large, easy-to-see format. Depth is always displayed.
Readouts for temperature, speed and Triplog information are displayed automatically if the
appropriate accessory is connected to the 700 Series™ Fishing System. The Triplog shows distance
traveled, average speed, and time elapsed since the Triplog was last reset. The digital readouts in
the Big Digits View cannot be customized.
Big Digits View
Timer shows the time
elapsed since Triplog
was last reset
Depth
Distance is the distance
traveled since the Triplog
was last reset
Temperature
Voltage - the battery
voltage.
Speed
Average Speed shows
the speed since the
Triplog was last reset
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Circular Flasher View
Circular Flasher View displays Real Time Sonar (RTS®) data in the traditional flasher format. Depth
and temperature are always displayed. The digital readouts in the Flasher View cannot be
customized.
Screen Snapshot View
When Screen Snapshot is enabled (from the Accessories menu tab), pressing the MARK key
creates a saved screen capture (when you have an optional-purchase MMC/SD card installed).
Screen Capture View
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Taking a screen snapshot is a three step process: (there are four steps here??)
1. Enabling Screen Snapshot from the Accessories Menu.
2. Making a Screen Snapshot.
3. Viewing a Screen Snapshot using the Screen Snapshot View.
4. Deleting a Screen Snapshot using the Screen Snapshot X-Press™ menu.
For more information, see the Accessories Menu Tab: Using Screen Snapshot procedure and the
Screen Snapshot X-Press™ Menu.
When you start a screen snapshot, you will see a message that a waypoint has been created at
the point where your cursor is on the screen, and the screen will freeze. A status dialog box will
appear that shows the progress of the save, and that displays the numbered file name assigned
to the .BMP file that is being created, along with the percentage completed status.
The Screen Snapshot View displays up to three thumbnails of these screen captures at a time. You
can scroll through the whole list of thumbnails of screen snapshots in this view using the 4-WAY
Cursor keys. The selected thumbnail will be highlighted with arrows. See the full-sized image by
selecting a thumbnail (using the Up or Down 4-Way Cursor keys), then using the Right 4-Way
Cursor key to view the full image. A border around the full-size screen snapshot indicates that it is
just a screen snapshot, not a “live” view. You can delete the selected image, or all images, using
Delete Image or Delete All Images from the Screen Snapshot X-Press™ menu.
Side Beam View
(with optional-purchase QuadraBeam™ transducer)
Side Beam View is only available if you have connected a QuadraBeamTM transducer accessory
and when Transducer Select is set to QuadraBeam™ (see Sonar Menu Tab: Transducer Select). The
QuadraBeam™ transducer requires a separate purchase. This view shows sonar information from
both the left and right 90° 455 kHz beams and the 200 kHz down-looking beam in one view. The
top portion of the display presents a historical log of sonar returns from the 200 kHz down-
looking sonar. The bottom portion of the display presents a historical log of sonar returns from
the 455 kHz right- and left-looking sonar. New information appears at the top, and scrolls down
the display.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Side Beam View
Depth
200 kHz Sonar
History Window
Temperature
Left Side 455 kHz
Sonar History
Window
Right Side 455 kHz
Sonar History
Window
Water Surface Line for 455 kHz
Sonar History Windows
The sonar information from the side-looking beams reveals bottom contour, structure and fish
similar to the down-looking beam, but the area covered is to the left and right of the area shown
in the down-looking portion, so you actually see more of the bottom. The distance covered by the
right and left 90° beams is based on the depth setting for the down-looking beam, up to a
maximum of 160 feet.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
WideSide® View
(with optional-purchase WideSide® transducer)
WideSide® View is only available if you have connected a WideSide® transducer accessory
and when Transducer Select is set to WideSide® (see Sonar Menu Tab: Transducer Select). The
WideSide® transducer requires a separate purchase. The WideSide® View displays
information from the 455 kHz WideSide® transducer. Three views are available: Left, Right
and Both. The default view is Both. Information from both the left and right beams are
displayed simultaneously. The depth of the water beneath the boat is always displayed. A
bottom contour may be present while bank fishing or fishing river channels. When fishing in
the open water, a bottom contour will not be present, and only sonar returns from either
debris or fish will be displayed.
WideSide View
Left Side View
Right Side View
Bank Contour
Open Water
(no bottom
contour visible
on-screen)
Water Surface
Line
Depth
Side Beam
Depth Range
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Bird’s Eye View
Bird's Eye View - This view shows a 3-D, perspective view of the track and the chart’s land contour
from a point above and behind the boat (the eye point). As the boat turns, the eye point moves to
follow the boat.
When you press the 4-WAY Cursor key in the Bird’s Eye View, the position of the eye point will
shift. This allows you to move and turn the eye point so that you can look off to the sides, or even
behind the boat. Pressing the RIGHT or LEFT arrow keys on the 4-WAY Cursor key turns the eye
point right or left, while pressing the UP arrow key moves the eye point forward, and pressing the
DOWN arrow key moves the eye point backward.
Pressing the EXIT key moves the eye point back to its original position behind and above the boat.
Bird’s Eye View
Depth
Latitude and
Longitude
Position of Boat
Land Contours
Boat Icon
Speed of Boat
Bearing of Boat
with Respect to
True North
Water Surface
Temperature
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Chart View
Chart View - This view shows cartography from the built-in Uni-Map™ or an optional MMC
map for the area surrounding your current position. The current track (also known as the
position history or breadcrumb trail) showing where the boat has been, along with saved
tracks, waypoints, and the current route (when navigating), are overlaid on the chart. You can
use the 4-WAY Cursor Control key to shift/pan the chart to another area. You can use the
ZOOM (+/-) keys to zoom in and out. You can use the INFO key to get information on the chart
objects near the cursor.
Chart View without Active Cursor
Cartography
Depth
Map Scale
Speed Of Boat
Bearing of Boat
with Respect to
True North
Water Surface
Temperature
Chart View with Active Cursor
Cartography
Depth
Map Scale
Active Cursor
Latitude and
Longitude
Position of
Cursor
Bearing of Boat
with Respect to
True North
Distance to
the Cursor
and Bearing
to Cursor
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Combo View
Combo View - This view is displayed as a split screen, with Chart View on the left and Sonar View
on the right side of the screen. The width of the sonar window can be changed.
Combo View
Depth
Depth
Sonar Window
Map Scale
Cartography
Bearing of Boat
Water Surface
with Respect to
Temperature
True North
Speed of Boat
View Orientation
Both Chart and Combo views allow you to choose the orientation of the view. When North-Up
orientation is selected, True North is shown at the top of the display. In other words, objects
located to the north of the boat are drawn above the boat. When Course-Up orientation is
selected, the direction of motion of the boat is shown at the top of the display. In other words,
objects ahead of the boat are drawn above the boat. In both orientations, the view pans
automatically, so that the boat is always centered on the display. When the boat is stationary, it
is drawn as a circle. When the boat is in motion, it takes on a boat shape, pointed in the direction
of motion (always Up in the Course-Up orientation).
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing Cartography
In the Chart or Combo Views there are several cartography-related functions that you can access
using various keys.
Panning: Use the 4-WAY Cursor keys to move the chart
around on the display in the direction of the key being
pressed. When you do this, a bull's eye cursor is drawn at
the center of the screen and is linked to the boat by a gray
line, even if the boat is off the screen. At the same time, the
temperature and speed boxes in the lower left corner are
replaced with the distance and bearing from the boat to
the cursor position and the latitude/longitude coordinates
of the cursor.
Zooming: Use the Plus (+) key to Zoom In and the Minus
(-) key to Zoom Out showing the cartography at different
Chart View with Cursor Present
scales. The scale is indicated on the left side of the
display. If you zoom in beyond the available chart data, the display will go into Overzoom
mode whereby the last available chart data is amplified to reflect the scale selected. If you
zoom in so far that no cartography is available, a lat/long grid will be drawn instead.
Chart Info: Use the INFO key to get detailed information about the chart. If the cursor is active, you
will see information about the chart objects located near the cursor. If the cursor is not active, the
Chart Info menu will appear. You can select the nearest port, the nearest tide station, or the
nearest current station to see information about any of these objects.
NOTE: The built-in Uni-Map™ does not contain any Port, Tide or Current information. This information
is only available from optional-purchase MMC/SD cards.
Nearest Port: The position and services information for the nearest port to your present position
will be displayed. Press the EXIT key to remove the information box and the cursor bull’s eye will
be centered over the port position. The cursor information boxes at the bottom of the display will
indicate the distance and bearing to the port from your present position.
Nearest Tide Station: Tide information for the nearest tide station to your present position will be
displayed. This includes the position of the station and the times of the high and low tides for
today’s date. A tide graph is also displayed showing the rise and fall of the tides for the 24 hour
time period encompassing the date. You can change the date to look at tide information before
or after the date displayed by pressing the LEFT or RIGHT cursor key respectively. Press the EXIT
key to remove the information box and the cursor bull’s eye will be centered over the tide station
position. The cursor information boxes at the bottom of the display will indicate the distance and
bearing to the tide station from your present position.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Nearest Current Station: Current information for the nearest current station to your present
position will be displayed. This includes the position of the station and the current changes for
today. Two graphs are also presented that show the time, direction and flow speed of the current
changes for the 24 hour time period of today’s date. You can change the date to look at current
information before or after the date displayed by pressing the LEFT or RIGHT cursor key
respectively. Press the EXIT key to remove the information box and the cursor bull’s eye will be
centered over the current station position. The cursor information boxes at the bottom of the
display will indicate the distance and bearing to the current station from your present position.
Introduction to Navigation
Use the 700 Series™ Fishing System to establish waypoints at areas of interest and to navigate to
those waypoints via a savable route (representing the shortest intended distance between
waypoints). You can also view and save tracks, which represent the actual path of the boat.
Waypoints, Routes and Tracks
Waypoints are stored positions that allow you to mark areas of interest or navigation points. Your
700 Series™ Fishing System can store up to 750 waypoints.
Waypoints, Routes and Tracks
Depth
BRG: Bearing
Waypoint
to Waypoint
XTE: Cross
Track Error.
Distance of
Boat from
Route
Bearing of
Boat with
Respect to
True North
Route
DTG: Distance
Track
to Go to
Waypoint
Water Surface
Temperature
Speed of Boat
Routes link two or more waypoints together to create a path for navigation, and are used in trip
planning. You can link individual waypoints together by using the GOTO key. A route represents
your intended navigation and shows the shortest path from each waypoint to the next. As you
travel a route, staying on the route line is the most efficient way to get to your destination,
although you should always look out for obstacles not shown on the chart. Your 700 Series™
Fishing System can store up to 50 routes that can each contain up to 50 waypoints.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Tracks consist of detailed position history, and are displayed as a breadcrumb trail of trackpoints.
The Current Track shows the position history since the unit was powered up (maximum of 2000
trackpoints displayed). You can clear the Current Track or save it at any time. Your 700 Series™
Fishing System can store up to 10 saved tracks, each containing 2000 trackpoints. The current
track represents your actual path so far.
Save, Edit, or Delete a Waypoint
Save your current position as a waypoint: On any view, press the MARK key to save the current
position of the boat as a waypoint.
Save the cursor position as a waypoint: On the Chart or Combo view, use the Cursor key to
designate the position you want to save as a waypoint. Then press the MARK key to save the
marked position as a waypoint.
Save a position from the sonar history: On any Sonar view, use the Cursor key to point to a feature
in the sonar history (also called the Sonar Saver feature). Press the MARK key to create a waypoint
at the location where that sonar reading was taken. The new waypoint will also record the depth
at that location.
NOTE: When you save a waypoint by any of these methods, a numerical waypoint name is
automatically assigned. You can edit the waypoint information later to give it a different name
and select an icon to represent it (see Waypoint submenu on the Navigation Main Menu Tab).
Display the Waypoints Submenu: From any view, press the MENU key twice to display the Main
Menu System, then use the RIGHT Cursor key to select the Navigation tab. Select Waypoints and
press the RIGHT Cursor key to display the Waypoints submenu.
Program a specific position as a waypoint: To create a waypoint that is NOT your current position,
from the Waypoints submenu, select the Create option and press the RIGHT Cursor key. Use the
Cursor keys to program a waypoint name, latitude, longitude, and icon before selecting Save.
Edit a waypoint: From the Waypoints submenu, select Edit and press the RIGHT Cursor key to
display a list of saved waypoints. Select the waypoint you want to edit and press the RIGHT Cursor
key. Use the 4-WAY Cursor Control key to move from field to field, and the UP and DOWN Cursor
keys to changes values once you are in a field. In the Waypoint Name, Latitude and Longitude
fields, use the UP and DOWN Cursor keys to change the letter or number. All upper and lower case
letters are available, as well as digits 0-9 and some punctuation characters. In the Waypoint Icon
field, use the UP and DOWN Cursor keys to change the icon used to represent the waypoint on the
Combo and Chart Views. You can exit these fields with the LEFT and RIGHT Cursor keys or by
pressing the EXIT key. Select Save and press the RIGHT Cursor key to save your changes.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
To make it easier to select a waypoint, select Sort By and press the RIGHT or LEFT Cursor keys to
select a sort order:
•
•
•
Name shows the waypoints alphabetically
Time shows the most recently-created waypoint first
Distance shows the closest waypoint first.
Delete a waypoint: From the Waypoints submenu, select Delete and press the RIGHT Cursor key
to display a list of waypoints. Select the waypoint you want to delete, then press the RIGHT Cursor
key. You will be asked to confirm deletion before the waypoint is actually deleted.
Navigate to a Waypoint or Position
Navigate to the cursor position: From the Chart or Combo view, use the Cursor key to select a
position or waypoint to which you want to navigate. Press the GOTO key. Navigation will begin
immediately.
Navigate to a specified waypoint: Press the GOTO key, then choose the waypoint to which you
would like to navigate from the waypoint list and press the RIGHT Cursor key to select it.
NOTE: By repeating the previous instructions, you can add more waypoints to create a longer
multi-segment route.
Skipping a waypoint: From the Navigation X-Press™ menu, select Skip Next Waypoint and press
the RIGHT Cursor key. If there is not another waypoint to skip to, navigation will be cancelled.
Cancel navigation: From the Navigation X-Press™ menu, select Cancel Navigation and press the
RIGHT Cursor key. Canceling navigation removes the route and any waypoints created using the
GOTO key, but does not remove any saved routes from memory. You will be prompted to save the
current route when you cancel navigation.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Add a Waypoint Target or Trolling Grid
Waypoint Target
Add or Remove a Waypoint Target: From the Waypoints
submenu, select Target and press the RIGHT Cursor key
to display a list of waypoints. Select the waypoint you
want to target. A target consisting of concentric circles
centered on the selected waypoint will appear on all of
the navigation views; the target shows various distance
ranges from the targeted waypoint. To remove the
target, choose Remove Target from the Navigation
X-Press™ menu.
Chart View with Target
Add or Remove a Trolling Grid: From the Waypoints
submenu, select Grid and press the RIGHT Cursor key to
display a list of waypoints. Select the waypoint to which
you want to add the grid. The trolling grid will appear on all
of the navigation views, and can be used as a guide when
trolling around a waypoint. The grid can be rotated to any
desired heading using Grid Rotation from the Navigation
Main menu. To remove the trolling grid, choose Remove
Grid from the Navigation X-Press™ menu.
Waypoint
Trolling
Grid
Chart View with Grid
NOTE: Only one waypoint can have either a target or a grid at one time. If you apply a target or a
grid to a new waypoint, the original waypoint will lose its target or grid.
NOTE: The spacing of the rings on the waypoint target and the spacing of the grid lines on the
trolling grid is the same as the length of the scale bar on the left edge of the display. Zooming in or
out will decrease or increase the spacing, respectively.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Save, Edit or Delete a Route
Save the current route: While you are navigating, the current route can be saved. From the
Navigation X-PressTM menu, select Save Current Route and press the RIGHT Cursor key. Navigation
will continue.
Display the Routes submenu: From any view, press the MENU key twice to display the Main Menu
System, then use the RIGHT Cursor key to select the Navigation tab. Select Routes and press the
RIGHT Cursor key to display the Routes submenu.
Create a route: From the Routes submenu, select Create and press the RIGHT Cursor key. A Route
Edit screen will be displayed with an empty route. You can name the route, add waypoints to the
route from the list of all waypoints, and order the waypoints in the route using the Cursor keys.
Edit a saved route: From the Routes submenu, select Edit and press the RIGHT Cursor key. A Route
Edit screen will be displayed. Select the route you wish to edit and press the RIGHT Cursor key. Re-
name the route or change, delete or re-order the waypoints used in the route.
Delete a saved route: From the Routes submenu, select Delete and press the RIGHT Cursor key.
Select the route you wish to delete and press the RIGHT Cursor key. You will be asked to confirm
your choice by pressing the RIGHT Cursor key again before the route is deleted.
Travel a saved route: From the Routes submenu, select Travel and press the RIGHT Cursor key. A
list of saved routes will appear. Select the route you wish to travel and press the RIGHT Cursor key
to make this route the current route and begin navigation. You may also travel the route in either
forward or reverse order.
Route Info: From the Routes submenu, select Info and press the RIGHT Cursor key. A list of saved
routes will appear. Select the route for which you want information, and press the RIGHT Cursor
key. The list of waypoints in the route will be shown, with the distance and bearing from each
waypoint to the next, as well as the distance and bearing from the current position to the first
waypoint in the route.
Save or Clear a Current Track
Save the current track: From the Navigation X-PressTM menu, select Save Current Track and press
the RIGHT Cursor key. The track will remain on the display, but will change from black to gray. To
remove the track completely from the display, see Edit, Delete or Hide Saved Tracks.
NOTE: When you save a track, a name is automatically assigned. The track name consists of a
date/time stamp, but can be re-named later (see Edit a Saved Track).
Clear the current track: From the Navigation X-PressTM menu, select Clear Current Track and press
the RIGHT Cursor key. The track will be removed from the display and discarded.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Edit, Delete or Hide Saved Tracks
Display the Tracks Submenu: From any view, press the MENU key twice to display the Main Menu
System, then use the RIGHT Cursor key to select the Navigation tab. Select Tracks and press the
RIGHT Cursor key to display the Tracks submenu.
Edit a saved track: From the Tracks submenu, select Edit and press the RIGHT Cursor key to display
the list of saved tracks. Select the track you want to edit and press the RIGHT Cursor key. When the
Edit Track dialog box appears, use the Cursor keys to move between fields. In the Track Name field,
the UP and DOWN Cursor keys change the letter or number. All upper and lower case letters are
available, as well as digits 0-9 and some punctuation characters. You can exit the Track Name field
with the LEFT and RIGHT Cursor keys or by pressing the EXIT key. Select Save and press the RIGHT
Cursor key to save your changes.
Delete a saved track: From the Tracks submenu, select Delete and press the RIGHT Cursor key to
display the list of saved tracks. Select the track you want to delete and press the RIGHT Cursor key.
You will be asked to confirm deletion before the track is actually deleted.
Hide or display a saved track: From the Tracks submenu, select Visibility and press the RIGHT
Cursor key to display the list of saved tracks. Select the track you want to hide or display and use
the Cursor keys to select Hidden or Visible. Press the EXIT key to return to the Tracks submenu.
Key Functions
Your 700 Series™ Fishing System user interface consists of a set of easy-to-use keys that work with
various on-screen views and menus to give you flexibility and control over your fishing experience.
POWER/LIGHT Key
The POWER/LIGHT key is used to turn the 700 Series™ Fishing System on and off,
and also to adjust the backlight and contrast of the display. Press the
POWER/LIGHT key to turn the unit on. The Title screen is then displayed until the
700 Series™ Fishing System begins sonar operation.
Your 700 Series™ Fishing System will start up with the backlight on and
will automatically turn it off to conserve power. To turn the backlight on
for night fishing, or to adjust the display contrast, press the
POWER/LIGHT key to access the Light and Contrast menu. Use the 4-
WAY Cursor key to select Light or Contrast and then use the LEFT or
RIGHT Cursor key to change the settings. Press EXIT to exit the Light and
Contrast menu.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Press and hold the POWER/LIGHT key for 3 seconds to turn the unit off. A message will appear
telling you how many seconds there are until shutdown occurs. Your 700 Series™ Fishing System
should always be turned off using the POWER/LIGHT key. This will ensure that shutdown occurs
properly and any menu settings will be saved.
VIEW Key
The VIEW key is used to cycle through all available views. Press the VIEW key to
advance to the next view. Repeatedly pressing VIEW cycles through all views
available. Views can be hidden to optimize the system to your fishing
requirements (see Views Menu Tab).
INFO Key
Info - Press the INFO key while in Bird's Eye, Chart or Combo View to display
information about objects that are nearest to an active cursor.
If the cursor is not active, the following menu will be displayed. Use the 4-
WAY Cursor key to select Nearest Port, Nearest Tide Station or Nearest
Current Station, then use the RIGHT Cursor key to display the requested
information.
NOTE: The built-in UniMap™ does not contain Port, Tide or Current
information. This information is only available from optional purchase
MMC/SD cards.
MENU Key
The MENU key is used to access the menu system.
Start-Up Options Menu - Press the MENU key during the power up sequence to view the Start-Up
Options menu.
X-PressTM Menu - Press the MENU key once for the X-PressTM Menu. The X-PressTM menu allows you
to access frequently-used settings without having to navigate through the whole menu system.
When the X-PressTM menu is displayed, you can use the UP or DOWN Cursor keys to move to a
particular menu choice. As soon as you alter a parameter (using the RIGHT or LEFT Cursor keys) the
X-PressTM menu will collapse temporarily, and the screen will update if it is affected by your menu
setting change, allowing you to see the effects of your action immediately. Reactivate the X-
PressTM Menu by using the UP or DOWN Cursor keys.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Main Menu - Press the MENU key twice for the tabbed Main Menu System. The Main Menu System
is organized under tabbed headings to help you find a specific menu item quickly: Alarms, Sonar,
Navigation, Chart, Setup, Views and Accessories tabs are part of your tabbed Main Menu System. Use
the LEFT or RIGHT 4-WAY Cursor Control key to select a tab; then use the DOWN or UP key to select the
menu item, and the LEFT or RIGHT key to alter a menu setting.
4-WAY Cursor Control Key
The 4-Way Cursor Control Key has multiple functions, depending on the
situation:
•
Use the DOWN or UP arrow keys to select a menu choice from the menu list, then use
the LEFT or RIGHT arrow keys to change a menu setting.
NOTE: Menu choices are implemented and saved immediately - no further action is required.
•
In all Sonar views but the Big Digits view, pressing any 4-WAY Cursor Control key will
activate Freeze Frame and will then allow you to position the cursor on the display.
MARK Key
Press the MARK key while in any view to mark the position of a waypoint, either
at the current boat location, or, if the Cursor is active, at the current Cursor
location.
The MARK key only functions if you have the GPS receiver connected, or if you have enabled
Screen Snapshot from the Accessories menu tab. If you have enabled the Screen Snapshot feature,
pressing the MARK key still creates a waypoint, but it also captures the screen image to the
optional-purchase MMC/SD card.
NOTE: You must have an optional-purchase MMC/SD card installed for the screen snapshot
feature to work.
Navigation is not affected by the Screen Snapshot feature. Also, if Screen Snapshot is enabled but
there is no GPS receiver connected, pressing the MARK key will capture the screen image and
display an error saying that a GPS position fix is required to create a waypoint.
GOTO Key
If the Cursor is active, pressing the GOTO key while in any view creates a waypoint
and starts navigation towards that waypoint. If the Cursor is not active, pressing
the GOTO key displays the list of waypoints, so that you can select the waypoint
towards which you want to navigate.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
ZOOM (+/-) Key
Press the - or + ZOOM keys while in any of the Navigation Views or the Sonar
Zoom View to change the scale of the view to appear closer or farther away.
EXIT Key
The EXIT key has multiple functions, depending on the situation:
•
•
•
•
•
•
If an alarm is sounding, pressing EXIT will cancel the alarm.
If a menu tab is selected, pressing EXIT will exit the menu mode and return to the view.
If a menu is active, pressing EXIT will return to the previous level in the menu system.
Pressing EXIT will cycle through the available views in reverse order.
If Freeze Frame is active, pressing EXIT will return to a scrolling display.
If the Cursor is active, pressing EXIT will remove the cursor from the display.
Accessory Bus
Use the Accessory Bus to expand the functionality of your 700
Series™ Fishing System. Accessories plug directly into the 700
Series™ Fishing System, enabling Advanced features such as
WeatherSense® and the SmartCast® Wireless Sonar Link.
Additional tabs and menu choices will be added to the menu
system automatically when an accessory is plugged into the
unit. In addition, multiple accessories can be attached
simultaneously. See Accessories Menu Tab and 700 Series™
Fishing System Accessories in this manual, as well as your
accessory's Operations Manual for additional details.
NOTE: Accessories to enable WeatherSense® and the SmartCast® Wireless Sonar Link require
separate purchases. You can visit our website at www.humminbird.com or contact our Customer
Resource Center at 1-800-633-1468 for additional details.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Powering Up the Unit
Turn on your 700 Series™ Fishing System by pressing the
POWER/LIGHT key. The Title screen is displayed until the
700 Series™ Fishing System begins operation. Your 700
Series™ Fishing System will begin Normal or Simulator
operation, depending on the presence or absence of a
transducer.
767 Title Screen
33
Download from Www.Somanuals.com. All Manuals Search And Download.
The Menu System
The menu system is divided into easy-to-use menu modules. The main components of the
menu system are:
Start-Up Options Menu - Press the MENU key during the power up sequence to view the Start-
Up Options menu.
X-PressTM Menu - The X-PressTM menu allows you to access the settings
that are changed frequently without having to navigate through the
whole menu system. Press the MENU key once to display the X-PressTM
Menu. When you select a menu item from the X-PressTM menu, the menu
will collapse, leaving only the menu choice on the screen. Use the UP or
DOWN Cursor keys to reactivate the X-PressTM menu.
NOTE: The X-PressTM Menu choices will vary depending on which view is
active when you press the MENU key, as well as whether you are in
X-PressTM Menu
Normal or Advanced User Mode. Either the Sonar, Navigation, or Screen
Snapshot X-PressTM Menu will appear, depending on the view you are in.
Main Menu Tabs - Less frequently-adjusted menus are grouped into the Main Menu System. The
Main Menu system is organized under the following tab headings to help you find a specific menu
item quickly: Alarms, Sonar, Navigation, Chart, Setup, Views and Accessories.
Press the MENU key twice for the Main Menu, then use the 4-WAY
Cursor LEFT or RIGHT key to select a tab, and use the DOWN or UP key
to select a specific menu item under that tab, then use the LEFT or
RIGHT keys again to change a menu setting. Press the EXIT key to move
quickly to the top of the tab. A down arrow at the bottom of a menu
means that you can scroll to additional menu choices using the DOWN
Cursor key. A right or left arrow on a menu choice means that you can
use the RIGHT or LEFT Cursor keys to make changes or to see more
information.
Main Menu System
Normal User Mode
NOTE: The Main Menu choices will vary depending on whether you are in
Normal or Advanced User Mode.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
User Mode (Normal or Advanced) - An Advanced Mode is provided for users who desire the
highest level of control over the 700 Series™ Fishing System and Normal Mode for users who
desire greater simplicity and fewer menu choices. Additional Advanced menu choices will be
displayed throughout the menu system when you navigate to specific menus while in
Advanced Mode. Any changes made while in Advanced Mode will remain in effect after you
switch back to Normal Mode. See Setup Menu Tab: User Mode for specific instructions on
changing to Advanced User Mode.
Sonar Tab, Normal Mode
Sonar Tab, Advanced Mode
Total Screen Update - when you change any menu settings that affect the Sonar View, the view
will update immediately (i.e. you don’t have to exit the menu to apply the change to the screen).
For instance, by switching between "Inverse" and "Structure ID®" from the X-PressTM menu it is
possible to alternate quickly between the two viewing methods.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Start-Up Options Menu
Press the MENU key when the Title screen is displayed to
access the Start-Up Options menu.
Use the UP or DOWN 4-WAY Cursor keys to position the
cursor, then the RIGHT Cursor key to select one of the
following choices. If you wait too long, the system will
default to whichever menu mode happens to be highlighted:
• Normal
• Simulator
Start-Up Options Menu
• System Status
• PC Connect (use with PC Connect Cable).
See the following paragraphs for more information about each of these choices.
Normal Operation
Use Normal operation for on the water operation with a transducer connected. In addition, your
700 Series™ Fishing System uses advanced transducer detection methods to determine if a
transducer is connected. If a functioning transducer is connected, Normal operation will be selected
automatically at power up and your 700 Series™ Fishing System can be used on the water.
Exit Normal operation by powering your 700 Series™ Fishing System off.
Simulator
Use the Simulator to learn how to use your 700 Series™
Fishing System before taking your boat on the water. The
Simulator is a very powerful tool that simulates on the
water operation, providing a randomly-updated display. We
recommend going through this manual while using the
Simulator, since all of the menus function and affect the
display the way they actually do when in Normal operation.
NOTE: To get the full benefit of the Simulator, it is important
to select Simulator manually from the Start-Up Options
menu as opposed to letting the 700 Series™ Fishing System
enter Simulator automatically (as it will if a transducer is not
Simulator, Shown with Optional
WeatherSense® Accessory
connected and you do nothing during power up). Manually selecting Simulator from the Start-Up
Options menu allows you to pre-configure your 700 Series™ Fishing System for on the water
operation. Any menu changes you make will be saved for later use.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
A message will appear on the display periodically to remind you that you are using the Simulator.
Exit the Simulator by powering your 700 Series™ Fishing System off.
System Status
Use System Status to view system connections and to conduct a unit self-test.
The following screens are displayed in turn when you press the VIEW button when using System Status:
• Self Test
• Accessory Test
• GPS Diagnostic View.
Exit System Status by powering your Fishing System off.
Self Test
Self Test displays results from the internal diagnostic self
test, including unit serial number, Printed Circuit Board
(PCB) serial number, software revision, total hours of
operation and the input voltage.
System Status Self Test Screen
Accessory Test
Accessory Test lists the accessories connected to the
system.
NOTE: The speed accessory will be detected only if the
paddlewheel has moved since your 700 Series™ Fishing
System was powered up.
System Status Accessory Test Screen
37
Download from Www.Somanuals.com. All Manuals Search And Download.
GPS Diagnostic View
GPS Diagnostic View shows a sky chart and numerical data from the GPS receiver. The sky chart
shows the location of each visible GPS satellite with its satellite number and a signal strength bar.
A dark grey bar indicates that the satellite is being used to determine your current position. A light
gray bar indicates that the satellite is being monitored, but is not yet being used.
This view also reports the current position, local time and date, and other numeric
information. The current GPS Fix Type is reported as No Fix, 2D Fix, 3D Fix, or Enhanced. An
Enhanced fix has been augmented using information from WAAS, EGNOS, or MSAS. A 3D or
Enhanced Fix is required for navigation. HDOP (the Horizontal Dilution of Precision) is a GPS
system parameter which depends on the current satellite configuration. HDOP is used to
calculate the Estimated Position Error.
GPS Diagnostic View
Sky Chart
Satellite Being
Used
Satellite Being
Monitored
Current Latitude
and Longitude
PC Connect
(with PC Connect cable only)
Use PC Connect to update the software of the 700 Series™ Fishing System control head. This
feature requires the use of the PC Connect Cable. Complete instructions are included with the
PC Connect Cable accessory.
NOTE: The PC Connect Cable requires a separate purchase. For more information visit our website at
www.humminbird.com or contact our Customer Resource Center at 1-800-633-1468.
Exit PC Connect mode by powering the 700 Series™ Fishing System off.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Sonar X-PressTM Menu
(Sonar views only)
The Sonar X-PressTM menu provides access to the settings most
frequently-used. Press the MENU key once while in any of the
Sonar Views to access the Sonar X-PressTM menu.
NOTE: Menu choices will vary depending on system settings such as
whether the unit is set for Advanced User mode or what transducer
is currently selected.
Sonar X-PressTM Menu
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Side
(WideSide® transducer: WideSide® view only)
Side sets which transducer beam from the WideSide® Transducer is shown in the WideSide®
View. A WideSide® transducer must be connected to the 700 Series™ Fishing System. The Side
menu choice is available when Transducer Select is set to WideSide® (see Sonar Menu Tab:
Transducer Select) and can only be accessed from the Sonar X-PressTM menu when you are in
WideSide® view.
NOTE: Side requires the purchase of the WideSide® transducer. You can visit our website at
www.humminbird.com to order this accessory online or contact our Customer Resource Center at
1-800-633-1468.
To adjust the Side:
1. Make sure you are in WideSide® Transducer Mode and that a WideSide® transducer is
connected, then highlight Side on the Sonar X-PressTM menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Side setting.
(L [Left], Both, R [Right], Default = Both)
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Sensitivity
Sensitivity controls how much detail is shown on the display
and will adjust the sensitivity of all sonar frequencies. Increasing the sensitivity shows more sonar
returns from small baitfish and suspended debris in the water; however, the display may become
too cluttered. When operating in very clear water or greater depths, increased sensitivity shows
weaker returns that may be of interest. Decreasing the sensitivity eliminates the clutter from the
display that is sometimes present in murky or muddy water. If Sensitivity is adjusted too low, the
display may not show many sonar returns that could be fish.
NOTE: The Sensitivity setting is a global setting and will adjust the sensitivity of all sonar
frequencies, as compared to specific sensitivity adjustments (such as 83 kHz Sensitivity, 455 kHz
Balance or Wideside Sensitivity) that allow you to adjust the level of sensitivity for one specific
beam at a time.
Sensitivity at Low
Sensitivity at Medium
Sensitivity at High
To adjust the Sensitivity:
1. Highlight Sensitivity on the Sonar X-PressTM menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to increase or decrease the Sensitivity
setting. (Low = 1, High = 20, Default = 10)
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Upper Range
(Advanced: Sonar, Split Sonar, Big Digits and Circular Flasher
views only)
Upper Range sets the shallowest depth range that will be displayed on the Sonar, Split Sonar, Big
Digits and Circular Flasher Views. The Upper Range menu choice is available when User Mode is
set to Advanced (see Setup Menu Tab: User Mode) and can only be accessed from the Sonar, Split
Sonar, Big Digits and Circular Flasher Views. Upper Range is often used with Lower Range.
For example, if you are only interested in the area between 20 and 50 feet deep,
you should set the Upper Depth Range to 20 and the Lower Depth Range to 50.
The Sonar View will then show the 30 foot area between 20 and 50, and will not
show the surface or the bottom (assuming the bottom is deeper than 50 feet),
and will show greater detail for that area between 20 and 50 feet.
NOTE: A minimum distance of 10 feet will be maintained between the Upper and Lower Range
regardless of the manual settings entered.
To adjust the Upper Range:
1. Make sure you are in Advanced Mode, then highlight Upper Range on the Sonar X-PressTM
menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to increase or decrease the
Upper Range setting. (0 to 1490 feet or 0 to 497 meters [International Models only],
Default = 0)
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Lower Range
Lower Range sets the deepest depth range that will be
displayed. Automatic is the default setting. When in automatic mode, the lower range will be
adjusted by the unit to follow the bottom. Selecting a specific setting locks the depth range
into Manual mode. Use both Upper and Lower Range together to view a specific depth range
manually when looking for fish or bottom structure.
corner of the screen when you start manually adjusting the Lower Range to indicate that you
are in Manual mode.
will be displayed in the lower right
M
For example, if you are fishing in 60 feet of water but are only interested in
the first 30 feet (surface to a depth of 30 feet) you should set the Lower Depth
Range limit to 30. The display will show the 0 to 30 foot range, allowing you
to see a more detailed view than you would see if the display went all the way
to the bottom.
NOTE: A minimum distance of 10 feet will be maintained between the Upper and Lower Range
regardless of the manual settings entered.
To adjust the Lower Range:
1. Highlight Lower Range on the Sonar X-PressTM menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to increase or decrease the Lower
Range setting. (AUTO, 10 to 1500 feet, 3 to 500 meters [International Models only],
Default = AUTO)
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Side Beam Range
(WideSide® transducer: WideSide® view only)
Side Beam Range sets the deepest range that will be displayed in the WideSide® View. The
range must be set manually to keep the bottom visible on the display. If the Side Beam Range
is set too deep for current depth conditions the sonar information will become compressed
on the display and valuable detail will be lost. A WideSide® transducer must be connected to
the 700 Series™ Fishing System. Side Beam Range menu choice is available when Transducer
Select is set to WideSide® (see Sonar Menu Tab: Transducer Select) and can only be accessed
from the WideSide® view.
NOTE: The Side Beam Range requires the purchase of the WideSide® transducer. You can visit our
website at www.humminbird.com to order this accessory online or contact our Customer Resource
Center at 1-800-633-1468.
To adjust the Side Beam Range:
1. Make sure you are in WideSide® Transducer Mode and that a WideSide® transducer is
connected, then highlight Side Beam Range on the Sonar X-PressTM menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to increase or decrease the Side Beam
Range setting. (6 - 160 feet, or 2 - 40 meters [International Models only], Default = 160 feet
[40 meters])
Chart Speed
Chart Speed determines the speed at which the sonar
information moves across the display, and consequently the amount of detail shown. A faster
speed shows more information in the Sonar Views and is preferred by most anglers; however, the
sonar information moves across the display quickly. A slower speed keeps the information on the
display longer, but the bottom and fish details become compressed and may be difficult to
interpret. Regardless of the Chart Speed setting, the RTS® Window will update at the maximum
rate possible for the depth conditions. Adjust Chart Speed to your personal preference.
To adjust the Chart Speed:
1. Highlight Chart Speed on the Sonar X-Press™ menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to increase or decrease the Chart Speed
setting. (1-9, Ultra, where 1 = Slow, 9 = Fast, Ultra = Fastest, Default = 5)
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Bottom View
Bottom View selects the method used to represent bottom
and structure on the display.
Inverse represents weak returns as dark pixels and strong returns as lighter pixels. This has the
benefit of ensuring that weak signals will be clearly visible on the display.
Structure ID® represents weak returns as light pixels and strong returns as dark pixels. This has
the benefit of ensuring that strong returns will be clearly visible on the display.
WhiteLine® highlights the strongest sonar returns in white resulting in a distinctive outline. This
has the benefit of clearly defining the bottom on the display.
Bottom Black displays all pixels below the bottom contour as black, regardless of signal
strength. This has the benefit of providing a high contrast between the bottom and other
sonar returns on the display. Any targets such as fish, structure and thermoclines will be
shown using the Structure ID® method.
See Bottom Presentation for more information.
To adjust the Bottom View:
1. Highlight Bottom View on the Sonar X-PressTM Menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Bottom View setting.
(Inverse, Structure ID®, WhiteLine®, Bottom Black, Default = Inverse)
Bottom Range
(Sonar Zoom view only when Bottom Lock is On)
Bottom Range allows you to control how much of the water column, measured up from the
bottom, is shown in the Sonar Zoom View. Choose a small value to see low-lying bottom structure
or details of the bottom return. Choose a larger value to see large structure in deeper water. It is
possible to set the Bottom Range to be greater than the depth. In this case, you may see surface
clutter in a wavy band that mirrors changes in the depth.
To adjust the Bottom Range:
1. In the Sonar Zoom View, highlight Bottom Range on the Sonar X-Press™ menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Bottom Range setting.
(10 - 60 feet, 2-10 fathoms, or 3-20 meters [International Models only], Default = 15 feet)
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Bottom Lock
(Sonar Zoom view only)
Bottom Lock changes the mode of the Zoomed view in the Sonar Zoom View. Bottom Lock
continuously graphs the bottom at a constant point on the display regardless of changes in depth.
This "flattens" out the bottom contour, but is effective at showing fish on or near the bottom.
To turn on Bottom Lock:
1. In the Sonar Zoom View, highlight Bottom Lock on the Sonar X-Press™ Menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Bottom Lock setting to
on. (Off, On, Default = Off)
Cancel Navigation
(only when Navigating)
Cancel Navigation discards the current route and exits Navigation Mode. This menu choice
will only appear when you are currently navigating a route. This will not delete a previously-
saved route.
To Cancel Navigation:
1. Highlight Cancel Navigation on the Sonar X-PressTM menu.
2. Use the RIGHT 4-WAY Cursor Control key to initiate canceling navigation.
3. The Confirm dialog box will appear. To cancel navigation, press the RIGHT Cursor key
once more. To avoid canceling navigation, press the LEFT Cursor key.
4. The Save Current Route dialog box will appear. Use the RIGHT 4-WAY Cursor key to save
the route or the LEFT 4-WAY Cursor key to decline saving the route.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Navigation X-PressTM Menu
(Navigation views only)
The Navigation X-PressTM menu provides access to the settings
most frequently used. Press the MENU key once while in the
Bird's Eye View, the Chart or the Combo View to access the
Navigation X-PressTM menu.
NOTE: Menu choices will vary depending on system settings, such
as whether you are currently navigating.
Navigation X-PressTM Menu
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Waypoint [Name]
(Only with an active cursor on a waypoint)
Waypoint [Name] allows you to view the Waypoints submenu for the waypoint under your cursor.
To view the Waypoint [Name] Submenu:
1. Move the cursor onto an existing waypoint and press the MENU key once, or use Cursor
to Waypoint to select a waypoint from a list of saved waypoints.
2. Highlight Waypoint[Name] on the Navigation X-PressTM menu.
3. Use the RIGHT 4-Way Cursor Control key to view the Waypoints submenu, which
contains the following menu choices:
Waypoint Submenu
The Waypoint Submenu contains the following menu choices:
Edit allows you to edit the Name, Position (Latitude and Longitude) and select the Icon that will
be used to represent the waypoint in the Chart and Combo Views.
Delete allows you to delete a waypoint from the list of saved waypoints.
Target allows you to apply a target to a waypoint selected from the list of waypoints.
Grid allows you to apply a trolling grid to a waypoint selected from the list of waypoints.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Cursor to Waypoint
(Chart or Combo view only)
Cursor to Waypoint allows you to quickly move the cursor to any saved waypoint, so that you can
locate it or edit it.
NOTE This X-PressTM menu item appears only if you have saved waypoints.
To move cursor to a saved waypoint:
1. Highlight Cursor to Waypoint on the Navigation X-PressTM menu.
2. Use the RIGHT 4-WAY Cursor Control key to initiate Cursor to Waypoint.
3. Use the UP or DOWN 4-WAY Cursor Control key to highlight the waypoint you wish
to move the cursor to, then use the RIGHT 4-WAY Cusor Control key to select the
destination waypoint.
Save Current Track
Save Current Track allows you to save the current track being
displayed. After the current track is saved, a new current track is started.
To Save Current Track:
1. Highlight Save Current Track on the Navigation X-PressTM menu.
2. Use the RIGHT 4-WAY Cursor Control key to initiate saving the current track.
3. The Confirm dialog box will appear. To save the current track, press the RIGHT Cursor key
once more. To cancel saving the current track, press the LEFT Cursor key.
Clear Current Track
Clear Current Track allows you to clear the current track being
displayed and start a new track at the present position.
To Clear Current Track:
1. Highlight Clear Current Track on the Navigation X-PressTM menu.
2. Use the RIGHT 4-WAY Cursor Control key to initiate clearing the current track.
3. The Confirm dialog box will appear. To clear the current track, press the RIGHT Cursor
key once more. To cancel clearing the current track, press the LEFT Cursor key.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Save Current Route
(only when Navigating)
Save Current Route allows you to save the current route being displayed. This menu choice will
only appear when you are currently navigating a route.
To Save Current Route:
1. Highlight Save Current Route on the Navigation X-PressTM menu.
2. Use the RIGHT 4-WAY Cursor Control key to initiate saving the current route.
3. The Confirm dialog box will appear. To save the current route, press the RIGHT Cursor
key once more. To cancel saving the current route, press the LEFT Cursor key.
Skip Next Waypoint
(only when Navigating)
Skip Next Waypoint removes the next waypoint from the current route. This menu choice will
only appear when you are currently navigating a route.
To Skip Next Waypoint:
1. Highlight Skip Next Waypoint on the Navigation X-PressTM menu.
2. Use the RIGHT 4-WAY Cursor Control key to initiate skipping the next waypoint.
3. The Confirm dialog box will appear. To skip the next waypoint, press the RIGHT Cursor
key once more. To cancel skipping the next waypoint, press the LEFT Cursor key.
Cancel Navigation
(only when Navigating)
Cancel Navigation discards the current route and exits Navigation Mode. This menu choice
will only appear when you are currently navigating a route. This will not delete a previously-
saved route.
To Cancel Navigation:
1. Highlight Cancel Navigation on the Navigation X-PressTM menu.
2. Use the RIGHT 4-WAY Cursor Control key to initiate canceling navigation.
3. The Confirm dialog box will appear. To cancel navigation, press the RIGHT Cursor key
once more. To avoid canceling navigation, press the LEFT Cursor key.
4. The Save Current Route dialog box will appear. Use the RIGHT 4-WAY Cursor key to save
the route or the LEFT 4-WAY Cursor key to decline saving the route.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Remove Target
(only if a Target is Active)
Remove Target removes the waypoint target from the display. This menu choice will only appear
when a target has already been applied to a waypoint.
NOTE: See Add a Waypoint Target or Trolling Grid for more information.
To Remove a Target:
1. Highlight Remove Target on the Navigation X-PressTM menu.
2. Use the RIGHT 4-WAY Cursor Control key to remove the target.
Remove Grid
(only if a Grid is Active)
Remove Grid removes the waypoint grid from the display. This menu choice will only appear
when a grid has already been applied to a waypoint.
NOTE: See Add a Waypoint Target or Trolling Grid for more information.
To Remove a Grid:
1. Highlight Remove Grid on the Navigation X-PressTM menu.
2. Use the RIGHT 4-WAY Cursor Control key to remove the grid.
Sonar Window
(Combo view only)
Sonar Window sets the size of the Sonar Window in the Combo View. Sonar Window can only be
accessed from the Combo View.
To Set the Size of the Sonar Window in the Combo View:
1. Highlight Sonar Window on the Navigation X-PressTM menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to adjust the size of the sonar window.
(Wide, Medium, Narrow, Default = Medium)
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Waypoint [Name]
(Most recently-created waypoint)
Waypoint [Name] allows you to view the waypoints submenu for the most recently created
waypoint.
NOTE: You must have pressed the MARK key at least once since you last powered up the fishfinder
for this menu choice to appear.
To view the Waypoint [Name] Submenu:
1. Move the cursor to the desired position and press the MARK key once to save a waypoint.
2. Highlight Waypoint[Name] on the Navigation X-PressTM menu.
3. Use the RIGHT 4-Way Cursor Control key to view the Waypoints submenu.
Waypoint [Name] Submenu
The Waypoint Submenu contains the following menu choices:
Edit allows you to edit the Name, Position (Latitude and Longitude) and select the Icon that will
be used to represent the waypoint in the Chart and Combo Views.
Delete allows you to delete a waypoint from the list of saved waypoints.
Go To allows you to select a waypoint and start navigation toward that waypoint, or add that
waypoint to the end of the current route.
Target allows you to apply a target to a waypoint selected from the list of waypoints.
Grid allows you to apply a trolling grid to a waypoint selected from the list of waypoints.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Screen Snapshot X-PressTM Menu
(Screen Snapshot View only)
The Screen Snapshot X-PressTM menu provides access to the
Delete Image and Delete All Images functions. Press the MENU
key once while in the Screen Snapshot View to access the
Screen Snapshot X-PressTM menu.
Screen Snapshot
X-PressTM Menu
Delete Image
(optional-purchase MMC/SD Card, Screen Snapshot view only)
Delete Image allows you to delete a single screen capture image from the Screen Snapshot View.
This menu option is only available when you have an optional-purchase MMC/SD card installed
and you are in Screen Snapshot view.
To delete an image:
1. On the Screen Snapshot View, use the UP and DOWN 4-Way Cursor keys to select the
image you want to delete.
2. Highlight Delete Image on the Screen Snapshot X-Press™ menu.
3. Press the RIGHT 4-Way Cursor key to initiate this procedure.
4. A Confirm Dialog box will appear. Select Yes to delete the image or No to cancel the
operation.
Delete All Images
(optional-purchase MMC/SD Card, Screen Snapshot view only)
Delete All Images allows you to delete all the images at once from the Screen Snapshot View. This
menu option is only available when you have an optional-purchase MMC/SD card installed and
you are in Screen Snapshot view.
To delete all images:
1. From the Screen Snapshot View, highlight Delete All Images on the Screen Snapshot
X-Press™ Menu.
2. A confirmation dialog box will ask if you want to delete all images. Select Yes to delete,
or No to change your mind.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Sonar Menu Tab
Press the MENU key twice to access the Main Menu System and
then press the RIGHT Cursor key to select the Sonar tab.
NOTE: Menu choices will vary depending on system settings such
as whether the unit is set for Advanced User mode or what
transducer is currently selected.
Sonar Menu
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Beam Select
Beam Select sets which sonar returns from the transducer
will be displayed on the screen.
When set to 200/83 kHz, the returns from both beams are blended by starting with the 83 kHz
wide beam return, dimming it, and then overlaying it with the 200 kHz narrow beam return. The
darker 200 kHz narrow beam sonar returns will stand out from the paler 83 kHz wide beam sonar
returns. The Split Sonar View continues to display the sonar returns from each beam in their
respective windows. The blended information is shown in the Sonar View, Sonar Zoom View, and
the Big Digits View. The RTS® Window in the Sonar View and the Circular Flasher View will only
show the returns from the 200 kHz narrow beam.
When set to 200 kHz, only the returns from the 200 kHz narrow beam will be displayed in the
Sonar View, the Sonar Zoom View, the Big Digits View and the Circular Flasher View. The Split
Sonar View will continue to display returns from both beams in their respective windows. The
RTS® Window in the Sonar View will display the returns from the 200 kHz narrow beam.
When set to 83 kHz, the returns from the 83 kHz wide beam will be displayed in the Sonar View,
the Sonar Zoom View, the Big Digits View and the Circular Flasher View. The Split Sonar View will
continue to display returns from both beams in their respective windows. The RTS® Window will
display the returns from the 83 kHz wide beam.
To use Beam Select:
1. Highlight Beam Select on the Sonar main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to select either the 83 kHz
beam, the 200 kHz beam, or the 200/83 kHz beam. (200/83 kHz, 200 kHz, 83 kHz,
Default = 200 kHz)
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Fish ID+TM
Fish ID+TM uses advanced signal processing to interpret
sonar returns, and will display a Fish Symbol when very selective requirements are met. When
a fish is detected, a fish icon and its depth are displayed above the return that has been
classified as being a fish. Three different fish size icons represent the intensity of the sonar
return, and provide an indicator of relative fish size.
DualBeam PLUSTM Sonar models represent targets detected in the 200 kHz narrow beam as Shaded
Fish Symbols, and represent targets detected in the 83 kHz wide beam as Hollow Fish Symbols.
200 kHz, Narrow Beam
Shaded Fish Symbols
83 kHz, Wide Beam
Hollow Fish Symbols
When Fish ID+TM is turned off, the 700 Series™ Fishing System shows only the raw sonar returns
on the display. These returns will often result in "arches" forming on the display, indicating
potential targets. Due to the transducer beam angle, the distance to a fish decreases as the fish
moves into the beam, and then increases as it moves out again, creating a Fish Arch when this
distance change is shown on the display. Boat speed, chart speed, and the position of the fish
within the sonar beam greatly affect the shape of the arch.
Transducer Cone and Fish Arches
To turn Fish ID+™ on or off:
1. Highlight Fish ID+ on the Sonar main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to turn the Fish ID+TM setting On or Off.
(Off, On, Default = Off)
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Fish ID Sensitivity
Fish ID Sensitivity adjusts the threshold of the Fish ID+TM
detection algorithms. Selecting a higher setting allows weaker returns to be displayed as fish.
This is useful for identifying smaller fish species or baitfish. Selecting a lower setting displays
fewer fish from weak sonar returns. This is helpful when seeking larger species of fish. Fish ID
Sensitivity is used in conjunction with Fish ID+TM. Fish ID+TM must be On for Fish ID Sensitivity to
affect the ability of the 700 Series™ Fishing System to identify sonar returns as fish.
To change the Fish ID Sensitivity setting:
1. Highlight Fish ID Sensitivity on the Sonar main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Fish ID Sensitivity setting.
(Low = 1, High = 10, Default = 5)
Real Time Sonar (RTS®) Window
RTS® Window sets the RTS® Window to either Wide or
Narrow, or turns it off in the Sonar View. The RTS® Window always updates at the fastest rate
possible and only displays returns that are within the transducer beam. (See Real Time Sonar
(RTS®) Window for more information.)
RTS® Window (Wide)
RTS® Window (Narrow)
RTS® Window (Off)
To change the RTS® Window setting:
1. Highlight RTS Window on the Sonar main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the RTS® Window setting.
(Wide, Narrow, Off, Default = Wide)
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Zoom Width
Zoom Width adjusts the width of the Zoom window on the
Sonar Zoom View.
To change the Zoom Width Setting:
1. Highlight Zoom Width on the Sonar main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Zoom Width setting.
(Narrow, Medium, Wide, Default = Wide)
83 kHz Sensitivity
(Advanced)
83 kHz Sensitivity changes the sensitivity of the 83 kHz beam. Increasing the 83 kHz Sensitivity
will display additional weak returns and decreasing the 83 kHz Sensitivity will display fewer weak
returns. The 83 kHz Sensitivity menu choice is only available when User Mode is set to Advanced
(see Setup Menu Tab: User Mode).
NOTE: 83 kHz Sensitivity is particularly useful for adjusting the sensitivity of the 83 kHz sonar
returns in the 200/83 kHz Split Sonar View. The 83 kHz sensitivity can be adjusted without
affecting the sensitivity of the 200 kHz returns shown in the 200 kHz sonar window.
To set the 83 kHz Sensitivity:
1. Make sure you are in Advanced User Mode, then highlight 83 kHz Sensitivity on the
Sonar main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to set the 83 kHz Sensitivity.
(-10 to +10, Default = 0)
455 kHz Balance
(Advanced, with QuadraBeam™ Transducer)
455 kHz Balance adjusts the sensitivity of the 455 kHz beam. Increasing the sensitivity will display
additional weak returns and decreasing the sensitivity will display fewer weak returns. A
QuadraBeam™ transducer must be attached to the 700 Series™ Fishing System. The 455 kHz
Balance menu choice is available when Transducer Select is set to QuadraBeam™ (see Sonar Menu
Tab: Transducer Select) and User Mode is set to Advanced (see Setup Menu Tab: User Mode).
NOTE: The 455 kHz Balance requires the purchase of the QuadraBeam™ transducer. You can visit
our website at www.humminbird.com to order this accessory online or contact our Customer
Resource Center at 1-800-633-1468.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE: 455 kHz Balance is particularly useful for adjusting the sensitivity of the 455 kHz sonar
returns in the Side Beam View. The 455 kHz sensitivity can be adjusted without affecting the
sensitivity of the 200 kHz returns shown in the 200 kHz sonar window.
To change the 455 kHz Balance setting:
1. Make sure you have selected QuadraBeamTM Transducer and Advanced Mode, then
highlight 455kHz Balance on the Sonar Main Menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the 455 kHz Balance.
(-10 to +10, Default = 0)
WideSide® Sensitivity
(Advanced: with WideSide® transducer)
WideSide® Sensitivity adjusts the sensitivity of the WideSide® beam. Increasing the sensitivity will
display additional weak returns and decreasing the sensitivity will display few weak returns. A
WideSide® transducer must be attached to the 700 Series™ Fishing System. The WideSide®
Sensitivity menu choice is available when Transducer Select is set to WideSide® (see Sonar Menu
Tab: Transducer Select) and User Mode is set to Advanced (see Setup Menu Tab: User Mode).
NOTE: The WideSide® Sensitivity requires the purchase of the WideSide® transducer. You can visit
our website at www.humminbird.com to order this accessory online or contact our Customer
Resource Center at 1-800-633-1468.
NOTE: WideSide® Sensitivity is particularly useful for adjusting the sensitivity of the 455 kHz sonar
returns in the WideSide® View. The 455 kHz sensitivity can be adjusted without affecting the
sensitivity of the other sonar frequencies.
To change the WideSide® Sensitivity setting:
1. Make sure you have selected WideSide® Transducer and Advanced Mode and that the
WideSide® transducer is connected, then highlight WideSide® Sensitivity on the Sonar
Main Menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the WideSide® Sensitivity.
(-10 to +10, Default = 0)
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Depth Lines
(Advanced)
Depth Lines divide the display into four equal sections that are separated by three horizontal
depth lines. The depth of each line is displayed along the depth scale. You can either turn Depth
Lines On or Off. The Depth Lines menu choice is available when User Mode is set to Advanced (see
Setup Menu Tab: User Mode).
Depth Lines
Depth
Lines
To change the Depth Lines setting:
1. Make sure you are in Advanced User Mode, then highlight Depth Lines on the Sonar
main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to turn the Depth Lines setting On or
Off. (Off, On, Default = On)
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Surface Clutter
(Advanced)
Surface Clutter adjusts the filter that removes surface clutter noise caused by algae and aeration.
The lower the setting, the less surface clutter will be displayed. The Surface Clutter menu choice
is available when User Mode is set to Advanced (see Setup Menu Tab: User Mode).
Surface
Clutter
To change the Surface Clutter setting:
1. Make sure you are in Advanced User Mode, then highlight Surface Clutter on the Sonar main
menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Surface Clutter setting.
(Low = 1 to High = 10, Default = 5)
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Noise Filter
(Advanced)
Noise Filter adjusts the sonar Noise Filter to limit interference on the display from sources such as
your boat engine, turbulence, or other sonar devices. The Noise Filter menu choice is available
when User Mode is set to Advanced (see Setup Menu Tab: User Mode).
NOTE: The Off setting removes all filtering; Low, Medium and High settings add progressive
filtering of the sonar returns. In some deep water situations, the High setting may actually hinder
your unit’s ability to find the bottom.
To change the Noise Filter setting:
1. Make sure you are in Advanced User Mode, then highlight Noise Filter on the Sonar main
menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Noise Filter setting.
(Off, Low, Medium, High1, High2, High3, Default = Low)
Max Depth
(Advanced)
Max Depth adjusts the maximum depth of operation. The performance of your 700 Series™
Fishing System can be tuned to the maximum depth you will be fishing in by setting the Max
Depth. When a maximum depth is set, your 700 Series™ Fishing System will not attempt to
acquire sonar data below that depth, thus increasing overall performance. When Max Depth
is set to Auto, the 700 Series™ Fishing System will acquire bottom readings as needed (within
the capacity of the unit). If the bottom is deeper than the Max Depth setting, the digital depth
readout will flash, indicating that the 700 Series™ Fishing System cannot locate the bottom.
The Max Depth menu choice is available when User Mode is set to Advanced (see Setup Menu
Tab: User Mode).
To change the Max Depth setting:
1. Make sure you are in Advanced User Mode, then highlight Max Depth on the Sonar main
menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Max Depth setting.
(AUTO, 10 to 1500 feet, 3 to 500 meters [International Models only], Default = AUTO)
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Water Type
(Advanced)
Water Type configures your unit for operation in fresh or salt water. The Water Type menu choice
is available when User Mode is set to Advanced (see Setup Menu Tab: User Mode).
NOTE: In salt water, what would be considered a large fish might be 2 to 10 times bigger than a
large fish in fresh water (depending on the type of fish you are seeking). The salt water setting
allows for a greater range in fish size adjustment to account for this. Also, make sure that the
Water Type is set accurately, especially in salt water, as this affects the accuracy of deep water
depth readings.
To change the Water Type setting:
1. Make sure you are in Advanced User Mode, then highlight Water Type on the Sonar main
menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Water Type setting.
(Fresh, Salt, Default = Fresh)
Transducer Select
Transducer Select allows you to select which transducer you
want to use (the 700 Series™ Fishing System comes with a DualBeam PLUS™ transducer, and also
supports the optional-purchase QuadraBeam™ and WideSide® transducers.)
To change the selected Transducer:
1. Highlight Transducer Select on the Sonar Main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the transducer selected.
(DualBeam, QuadBeam, WideSide®, Default = DualBeam)
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Navigation Menu Tab
Press the MENU key twice to access the Main Menu System,
then press the RIGHT cursor key to select the Navigation tab.
NOTE: Menu choices will vary depending on system settings.
Navigation Menu Tab
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Current Track
Current Track allows you to view the Current Track submenu.
To view the Current Track Submenu:
1. Highlight Current Track on the Navigation main menu.
2. Use the RIGHT 4-WAY Cursor Control keys to view the
Current Track submenu.
Current Track Submenu
The Current Track Submenu contains the following menu choices:
Save Current Track allows you to save the current track.
Clear Current Track allows you to clear the current track.
Appearance allows you to change the style and color of the current track. (Breadcrumb Trail,
Dashed Line, or Solid Line, and if a line, the color of the line, from light to dark gray to black).
Saved Tracks
Saved Tracks allows you to view the Saved Tracks submenu.
To view the Saved Tracks Submenu:
1. Highlight Saved Tracks on the Navigation main menu.
2. Use the RIGHT 4-WAY Cursor Control keys to view the Saved Tracks submenu.
Saved Tracks Submenu
The Saved Tracks Submenu contains the following menu choices:
Edit allows you to select a previously-saved track and edit its name, whether it is visible or not, and
its appearance.
Delete allows you to delete a track from a list of previously-saved tracks.
Default sets the appearance of the track created by selecting Save Current Track.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Waypoints
Waypoints allows you to view the Waypoints submenu.
To view the Waypoints Submenu:
1. Highlight Waypoints on the Navigation main menu.
2. Use the RIGHT 4-WAY Cursor Control keys to view the Waypoints submenu.
Waypoints Submenu
The Waypoints Submenu contains the following menu choices:
Create allows you to create a new waypoint and edit it immediately. The current boat position
will be used as the default, but you can set the coordinates to any valid position. The Icon used to
represent the waypoint in the Chart and Combo Views can also be changed.
Edit allows you to choose from a list of previously-saved waypoints, then edit the Name, Position
(Latitude and Longitude) and select the Icon that will be used to represent the waypoint in the
Chart and Combo Views.
Delete allows you to delete a waypoint from the list of saved waypoints.
Cursor To allows you to move the cursor quickly to a waypoint selected from the list of saved
waypoints.
Go To allows you to select a waypoint and start navigation toward that waypoint, or add that
waypoint to the end of the current route.
Target allows you to apply a target to a waypoint selected from the list of waypoints.
Grid allows you to apply a trolling grid to a waypoint selected from the list of waypoints.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Routes
Routes allows you to view the Routes submenu.
To view the Routes Submenu:
1. Highlight Routes on the Navigation main menu.
2. Use the RIGHT 4-WAY Cursor Control keys to view the Routes submenu.
Routes Submenu
The Routes Submenu contains the following menu choices:
Create allows you to create a new, empty route and add waypoints to it immediately.
Edit allows you to select a previously-saved route and edit its name and the waypoints on it.
Delete allows you to delete a route from a list of previously-saved routes.
Travel allows you to select a previously-saved route to use as the current route; this menu
setting also begins navigation on this route. Routes can be traveled in either the forward or
reverse direction.
Info displays information about the route, including the distance and bearing from each
waypoint to the next.
Chart Orientation
Chart Orientation allows you to select whether the Chart and
Combo Views should be drawn North-Up or Course-Up.
To change the Chart Orientation setting:
1. Highlight Chart Orientation on the Navigation main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Chart Orientation
setting. (North-Up, Course-Up, Default = North-Up)
NOTE: The Chart Orientation setting does not apply to the Bird's Eye View.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
North Reference
North Reference allows you to have bearings displayed with
one of two orientations: True North or Magnetic North.
To change the North Reference setting:
1. Highlight North Reference on the Navigation main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the North Reference setting.
(True, Magnetic, Default = True)
Grid Rotation
Grid Rotation allows you to set the orientation of the trolling
grid in degrees, where a setting of 0° displays a standard North, South, East, West alignment. See
Waypoints for information on how to set a Grid.
To change the Grid Rotation setting:
1. Highlight Grid Rotation on the Navigation main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Grid Rotation setting. (0°
to 89°, Default = 0°)
Trackpoint Interval
Trackpoint Interval allows you to select the time period
between trackpoints. The current track can only contain up to 2000 trackpoints, so longer time
periods cause the track to extend back further in time, but will be less detailed.
NOTE: Trackpoint Interval works in conjunction with Track Min Distance. Both conditions must be
met before a trackpoint is added to the current track.
To change the Trackpoint Interval setting:
1. Highlight Trackpoint Interval on the Navigation main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Trackpoint Interval
setting. (1 second, 5 seconds, 10 seconds, 15 seconds, 30 seconds or 60 seconds,
Default = 15 seconds)
NOTE: During slow travel or drift, setting both Trackpoint Interval and Track Min Distance to small
values will allow you to increase the track resolution.
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Track Min Distance
(Advanced)
Track Min Distance allows you to set a minimum distance of travel before a trackpoint is added
to the track. The Track Min Distance menu choice is only available when User Mode is set to
Advanced (see Setup Menu Tab: User Mode).
NOTE: Track Min Distance works in conjunction with Trackpoint Interval. Both conditions must be
met before a trackpoint is added to the current track.
To change the Track Minimum Distance setting:
1. Make sure you are in Advanced User Mode, then highlight Track Min Distance on the
Navigation main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Track Min Distance
setting. (1 to 300 feet or 1 to 100 meters [International Units only], Default = 16 ft, 5 m)
NOTE: During slow travel or drift, setting both Trackpoint Interval and Track Min Distance to small
values will allow you to increase the track resolution.
Map Datum
(Advanced)
Map Datum allows you to change the map coordinate system used by the 700 Series™ Fishing
System to match those of a paper map. The Map Datum menu choice is only available when User
Mode is set to Advanced (see Setup Menu Tab: User Mode).
To change the Map Datum setting:
1. Make sure you are in Advanced User Mode, then highlight Map Datum on the
Navigation main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Map Datum setting.
(Default = WGS 84)
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Course Projection Line
Course Projection Line allows you to display or hide an arrow
extending from the bow of the boat that projects your current course, and shows where the boat
will go if you continue on your present course.
To change the Course Project Line setting:
1. Highlight Course Projection Line on the Navigation main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Course Projection Line
setting (Hidden, Visible, Default = Hidden)
Export All Nav Data
(Advanced)
Export All Nav Data allows you to export all saved Tracks, Waypoints and Routes to an MMC/SD
card. The Export All Nav Data menu choice is only available when User Mode is set to Advanced
(see Setup Menu Tab: User Mode).
To Export All Navigation Data:
1. Make sure you are in Advanced User Mode, and that an optional-purchase MMC/SD card
is installed in the slot, then highlight Export All Nav Data on the Navigation main menu.
2. Use the RIGHT 4-WAY Cursor Control key to export all navigation data.
A
confirmation dialog box will appear to allow you to change your mind, and to
confirm your choice. If no MMC card is installed, and error message will be displayed.
Insert the MMC card and try again.
Delete All Nav Data
(Advanced)
Delete All Nav Data allows you to delete all saved Tracks, Waypoints and Routes. This menu
choice should be used with caution. The Delete All Nav Data menu choice is only available when
User Mode is set to Advanced (see Setup Menu Tab: User Mode).
To Delete All Navigation Data:
1. Make sure you are in Advanced User Mode, then highlight Delete All Nav Data on the
Navigation main menu.
2. Use the RIGHT 4-WAY Cursor Control key to delete all navigation data.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Chart Menu Tab
Press the MENU key twice to access the Main Menu System
and then press the RIGHT Cursor key to select the Chart tab.
NOTE: Menu choices will vary depending on system settings
such as whether the unit is set for Advanced User mode.
Chart Menu
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Chart Detail Level
Chart Detail Level allows you to select how much chart
detail you want displayed on the Navigation Views. Basic shows land areas, ports,
obstructions and restricted areas. Navigation shows navaids, landmarks, ferryways and
navigation routes in addition to the Basic information. Underwater shows depth contours,
fishing areas, underwater wrecks, tides and currents in addition to the Basic and Navigation
information. All shows roads, buildings, railways, and other notations in addition to the Basic,
Navigation and Underwater information.
To change the Chart Detail Level setting:
1. Highlight Chart Detail Level on the Chart main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Chart Detail Level
setting. (Basic, Navigation, Underwater, All, Default = All)
NOTE: Some chart details are only available with optional-purchase MMC/SD cards.
Map Borders
Map Borders allows you to display or hide map borders. A
Map Border indicates an area which contains a different map.
Map Borders
Map Borders
To change the Map Borders setting:
1. Highlight Map Borders on the Chart main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Map Borders setting.
(Hidden, MMC/SD Only, All Visible, Default = Hidden)
72
Download from Www.Somanuals.com. All Manuals Search And Download.
Lat/Lon Grid
Lat/Lon Grid allows you to display or hide a grid showing
latitude and longitude lines.
To change the Lat/Lon Grid setting:
1. Highlight Lat/Lon Grid on the Chart main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Lat/Lon Grid setting.
(Hidden, Visible, Default = Hidden)
Spot Soundings
Spot Soundings allows you to display or hide spot soundings,
which are depth measurements shown on the chart.
NOTE: Spot Soundings are only available with optional-purchase MMC/SD cards.
To change the Spot Soundings setting:
1. Highlight Spot Soundings on the Chart main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Spot Soundings setting.
(Hidden, Visible, Default = Hidden)
Set Simulation Position
(Advanced)
Set Simulation Position allows you to set the position of the boat used in the Simulator. The Set
Simulation Position menu choice is only available when User Mode is set to Advanced (see Setup
Menu Tab: User Mode).
To set the Simulation Position:
1. Activate the cursor and move it to the coordinates from where you want the simulation
to start.
NOTE: The cursor must be active in order for this procedure to work.
2. Make sure you are in Advanced User Mode, then highlight Set Simulation Position on the
Chart main menu.
3. Use the RIGHT 4-WAY Cursor Control key to change the Simulation Position setting. A
confirmation dialog box will appear to allow you to change your mind, or to confirm your
choice. If the cursor was not active before you began this procedure, you will see an error
message. Exit the menu, set the cursor, then try again.
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Set Map Offset
(Advanced)
Set Map Offset allows you to change the map offset used by the 700 Series™. The Set Map
Offset menu choice is only available when User Mode is set to Advanced (see Setup Menu Tab:
User Mode).
NOTE: The Map Offset will be applied to all maps and not just the map that requires the correction.
The Map Offset should be cleared if a different map is to be used.
To change the Map Offset setting:
1. Activate the cursor and move it to the location where the Map Offset will be applied.
NOTE: The cursor must be active in order for this procedure to work.
2. Make sure you are in Advanced User Mode, then highlight Set Map Offset on the Chart
main menu.
3. Use the RIGHT 4-WAY Cursor Control key to set the Map Offset. A confirmation dialog
box will appear to allow you to change your mind, or to confirm your choice. If the cursor
was not active before you began this procedure, you will see an error message. Exit the
menu, set the cursor, then try again.
Clear Map Offset
(Advanced)
Clear Map Offset allows you to clear the Map Offset. The Clear map Offset menu choice is only
available when User Mode is set to Advanced (see Setup Menu Tab: User Mode) and a Map Offset
is currently active.
To Clear Map Offset:
1. Make sure you are in Advanced User Mode, then highlight Clear Map Offset on the Chart
main menu.
2. Use the RIGHT 4-WAY Cursor Control key to clear the Map Offset.
74
Download from Www.Somanuals.com. All Manuals Search And Download.
Alarms Menu Tab
From any view, press the MENU key twice to access the Main
Menu System. The Alarms tab will be the default selection.
NOTE: When an alarm is triggered, you can silence it by pressing
any key. The alarm will be silenced, and will not be triggered
again until a new instance of the alarm condition is detected.
Alarms Menu
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Depth Alarm
Depth Alarm sounds when the depth becomes equal to or
less than the menu setting.
To change the Depth Alarm setting:
1. Highlight Depth Alarm on the Alarms main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Depth Alarm setting.
(OFF, 1 to 100 feet, or 0.5 to 30 meters [International Models Only], Default = OFF)
Fish ID Alarm
Fish ID Alarm sounds when the Fishing System detects fish
that correspond to the alarm setting. Fish ID Alarm will only sound if Fish ID+TM is on.
For example, if you've set the Fish ID Alarm to sound for Large fish only, the Fish
ID alarm will sound when a large-sized fish is detected.
To change the Fish ID Alarm setting:
1. Highlight Fish ID Alarm on the Alarms main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Fish ID Alarm setting.
(Off, All, Large/Medium, Large, Default = Off)
Off
Large
Large/Medium
All
76
Download from Www.Somanuals.com. All Manuals Search And Download.
Low Battery Alarm
Low Battery Alarm sounds when the input battery voltage is
equal to or less than the menu setting. The battery alarm will only sound for the battery that is
connected to the 700 Series™ Fishing System. The Low Battery Alarm should be set to warn you
when the battery voltage drops below the safety margin that you have determined. For instance,
if you are running a trolling motor (battery operated), you would want to set the Low Battery
Alarm to sound before the battery voltage drops too low for it to be used to start your main,
gasoline-powered engine.
To change the Low Battery Alarm setting:
1. Highlight Low Battery Alarm on the Alarms main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Low Battery Alarm
setting. (Off, 8.5V - 13.5V, Default = Off)
Temp Alarm
Temp Alarm sounds when the water temperature detected
by the 700 Series™ reaches the Temp Alarm setting, which is either set in degrees Fahrenheit
or Celsius [International Models only]. For example, if the Temp Alarm is set to 58 degrees
Fahrenheit, and the water temperature falls from 60 degrees to 58 degrees, the Temp Alarm
will sound. Similarly, if the water temperature rises from 56 degrees to 58 degrees, the Temp
Alarm will also sound.
To change the Temp Alarm setting:
1. Highlight Temp Alarm on the Alarms main menu.
2. Use the LEFT or RIGHT 4-Way Cursor Control keys to change the Temp Alarm setting.
(Off, 33-120 [Fahrenheit], 0-50 [Celsius], Default = Off)
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Off Course Alarm
Off Course Alarm sounds when the boat has moved too far off
course based on the menu setting when navigating. Off Course Alarm allows you to set how far
the boat is allowed to move off course before the Off Course Alarm will sound.
Off Course Limits
Arrival Alarm Circle
To change the Off Course Alarm setting:
1. Highlight Off Course Alarm on the Alarms main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Off Course Alarm
setting. (Off, 25 to 3000 feet, 10 to 1000 meters [International Models only], Default
= 300 ft, 100 m)
Arrival Alarm
Arrival Alarm sounds when the boat has either exceeded the
distance to the destination waypoint, or has entered the Arrival Alarm Circle, based on the menu
setting when navigating. Arrival Alarm allows you to set how close the boat must be to the
destination waypoint before the Arrival Alarm will sound.
To change the Arrival Alarm setting:
1. Highlight Arrival Alarm on the Alarms main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Arrival Alarm setting.
(Off, 25 to 3000 feet, 10 to 1000 meters [International Models only], Default = 150 ft,
50 m)
78
Download from Www.Somanuals.com. All Manuals Search And Download.
Drift Alarm
Drift Alarm sounds when the boat has exceeded the distance
from the boat’s anchored position, based on the menu setting. Drift Alarm allows you to set the
size of a perimeter around the boat’s anchored position; if the anchored boat drifts outside of that
perimeter, the Drift Alarm will sound.
Drift Alarm Circle
Drift Alarm Perimeter
To change the Drift Alarm setting:
1. Highlight Drift Alarm on the Alarms main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Drift Alarm setting.
(Off, 25 to 3000 feet, 10 to 1000 meters [International Models only], Default = Off)
Alarm Tone
Alarm Tone selects the pitch of the alarm sound. A brief
tone will be produced as you adjust the Alarm Tone so that you can select the tone that you
can hear best.
To change the Alarm Tone setting:
1. Highlight Alarm Tone on the Alarms main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Alarm Tone setting.
(High, Medium, Low, Default = Medium)
79
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Menu Tab
From any view, press the MENU key twice to access the tabbed
Main Menu System, then press the RIGHT cursor key until the
Setup tab is selected.
NOTE: Menu choices will vary depending on system settings such
as whether the unit is set for Advanced User mode and what
accessories are attached to the unit.
Setup Menu Tab
80
Download from Www.Somanuals.com. All Manuals Search And Download.
Units - Depth
Units - Depth selects the units of measure for all depth-related
readouts.
To change the Units - Depth setting:
1. Highlight Units - Depth on the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Units - Depth setting.
(Meters [International Models only], Feet, Fathoms; Default is Meters for International
models, and Feet for Domestic models)
Units - Temp
(International only)
Units - Temp selects the units of measure for all temperature-related readouts. International
Models only.
To change the Units - Temp setting:
1. Highlight Units - Temp on the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Units - Temp setting.
(Celsius, Fahrenheit; Default = Celsius)
Units - Distance
Units - Distance selects the units of measure for all distance-
related readouts, and will appear in the menu if a Temp/Speed Accessory is connected and the
paddlewheel has moved at least once, or if the GPS Receiver is connected.
To change the Units - Distance setting:
1. Highlight Units - Distance on the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Units - Distance setting.
(Domestic Models: Statute Miles, Nautical Miles; Default = Statute Miles; International
Models: Meters/Kilometers, Meters/Nautical Miles, Feet/Statute Miles, Feet/Nautical
Miles; Default = Meters/Kilometers)
81
Download from Www.Somanuals.com. All Manuals Search And Download.
Units - Speed
Units - Speed selects the units of measure for speed-related
readouts, and will appear in the menu if a Temp/Speed Accessory is connected and the
paddlewheel has moved at least once, or if the GPS Receiver is connected.
To change the Units - Speed setting:
1. Highlight Units - Speed on the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Units - Speed setting.
(kph [International Models only], mph, kts, Default = kph for International models and
mph for Domestic models)
User Mode
User Mode sets the menu system to either Normal or Advanced.
When set to Normal (default setting,) only the basic menu options are shown. When set to
Advanced, additional menu choices are available.
To change the User Mode setting:
1. Highlight User Mode on the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the User Mode setting.
(Normal, Advanced, Default = Normal)
Language
(International only)
Language selects the display language for menus. International Models only.
To change the Language setting:
1. Highlight Language on the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Language setting.
(Default = English)
82
Download from Www.Somanuals.com. All Manuals Search And Download.
Triplog Reset
Triplog Reset resets the Triplog to zero, and will appear in the
menu if a Temp/Speed Accessory is connected and the
paddlewheel has moved at least once, or if the GPS Receiver is connected. The Triplog
provides the following information: timer for elapsed time, distance traveled since last reset,
and average speed.
NOTE: See Setup Menu Tab: Select Readouts (Advanced) to find out how to display Triplog
information on the screen.
To Reset Triplog:
1. Highlight Reset Triplog on the Setup menu.
2. Use the RIGHT 4-WAY Cursor Control key to initiate Triplog Reset.
3. The Confirm dialog box will appear. To reset the Triplog, press the RIGHT Cursor key once
more. To cancel Reset Triplog, press the LEFT Cursor key.
Restore Defaults
Restore Defaults resets ALL menu settings to their factory
defaults. Use this menu choice with caution!
To Restore Defaults:
1. Highlight Restore Defaults on the Setup menu.
2. Use the RIGHT 4-WAY Cursor Control key to initiate restoring defaults.
3. The Confirm dialog box will appear. To reset the defaults, press the RIGHT Cursor key
once more. To cancel Restore Defaults, press the LEFT Cursor key.
83
Download from Www.Somanuals.com. All Manuals Search And Download.
Select Readouts
(Advanced, Sonar view only)
Select Readouts sets individual digital readouts on the Sonar
View. This Advanced feature allows you to select what data will be
displayed in each of 6 fixed-position data windows arranged
around the left and bottom edges of the Sonar View screen, or
whether a particular window will be turned off, displaying
nothing in that area; you can access this menu choice only when
in Advanced User Mode (see Setup Menu Tab: User Mode.)
Data windows can display readouts from supported accessories
such as Temp/Speed. Each data window can either be empty or
contain one of the following:
• Course
• Temperature
• Time + Date
• Triplog
Select Readouts
• Navigation
• Position
• Speed
• Voltage.
Customized Sonar View
Default Sonar View
To Select Readouts:
1. Make sure you are in Advanced User Mode, then highlight Select Readouts on the
Setup main menu.
2. Use the RIGHT 4-WAY Cursor Control key to initiate this procedure.
3. The Select Readouts submenu will appear, showing a list of all Readouts. Use the UP or
DOWN Cursor keys to select a particular Readout position, then use the RIGHT or LEFT
Cursor keys to change what will be displayed at that position. (Course, Navigation,
Position, Off, Speed, Temperature, Time+Date, Triplog, Voltage)
84
Download from Www.Somanuals.com. All Manuals Search And Download.
Depth Offset
(Advanced)
Depth Offset will adjust the digital depth readout to indicate depth from the waterline or boat's
keel. Enter a positive vertical measurement from the transducer to the waterline to read the depth
from the waterline. Enter a negative vertical measurement from the transducer to keel to read the
depth from the keel. This menu choice is available only when in Advanced User Mode (see Setup
Menu Tab: User Mode.)
To change the Depth Offset setting:
1. Make sure you are in Advanced User Mode, then highlight Depth Offset on the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Depth Offset setting.
(-10.0 to +10.0 feet or -3 to 3 meters [International Models only], Default = 0)
Temp Offset
(Advanced)
Temp Offset will adjust the temperature readout by the amount entered. This menu choice is
available only when in Advanced User Mode (see Setup Menu Tab: User Mode.)
To change the Temp Offset setting:
1. Make sure you are in Advanced User Mode, then highlight Temp Offset on the Setup
menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Temp Offset setting.
(-10.0 to +10.0 degrees, Default = 0)
Speed Calibration
(Advanced, with Temp/Speed only)
Speed Calibration will adjust the speed readout by the percentage entered, and will appear in the
menu if a Temp/Speed Accessory is connected and the paddlewheel has moved at least once, when
the unit is in Advanced User Mode (see Setup Menu Tab: User Mode.)
To change the Speed Calibration setting:
1. Make sure you are in Advanced User Mode, then highlight Speed Calibration on the
Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Speed Calibration
setting. (-20% to +20%, Default = 0%)
85
Download from Www.Somanuals.com. All Manuals Search And Download.
Local Time Zone
(Advanced)
Local Time Zone selects your time zone in reference to the time reported by the GPS receiver when
Time+Date is selected as a Digital Readout on the Sonar View (see Select Readouts). This menu
choice is available only when in Advanced User Mode (see Setup Menu Tab: User Mode).
To change the Local Time Zone:
1. Make sure you are in Advanced User Mode, then highlight Local Time Zone on the Setup
menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Local Time Zone
(Default = EST [UTC-5] - Eastern Standard Time).
Daylight Saving Time
(Advanced)
Daylight Saving Time adjusts the time display to account for local Daylight Saving Time when
Time+Date is selected as a Digital Readout on the Sonar View (see Select Readouts). Selecting
On adds one hour to the time display adjusted for your local time zone. Selecting Off leaves
the time display as adjusted for your local time zone. This menu choice is available only when
in Advanced User Mode (see Setup Menu Tab: User Mode).
To change the Daylight Saving Time setting:
1. Make sure you are in Advanced User Mode, then highlight Daylight Saving Time on the
Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to turn Daylight Saving Time On or Off.
(Off, On, Default = Off)
86
Download from Www.Somanuals.com. All Manuals Search And Download.
Position Format
(Advanced)
Position Format selects the format of the latitude and longitude position display. This menu
choice is available only when in Advanced User Mode (see Setup Menu Tab: User Mode).
To change the Position Format setting:
1. Make sure you are in Advanced User Mode, then highlight Position Format on the Setup
menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Position Format.
(dd.ddddd°, dd°mm.mmm', or dd°mm'ss", Default = dd°mm.mmm')
Time Format
(Advanced, International only)
Time Format changes the time format used by the unit This menu choice is available only when in
Advanced User Mode (see Setup Menu Tab: User Mode). International Models only. Time Format
selects a 12 hour or 24 hour format for the time of day displayed when Time + Date is selected as a Digital
Readout on the Sonar View (see Select Readouts).
To change the Time Format:
1. Make sure you are in Advanced User Mode, then highlight Time Format on the Setup
menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Time Format.
(12 hour, 24 hour, Default = 12 hour)
Date Format
(Advanced, International only)
Date Format changes the date format used by the unit This menu choice is available only when in
Advanced User Mode (see Setup Menu Tab: User Mode). International Models only. Date Format
selects the format for the date display when Time + Date is selected as a Digital Readout on the Sonar
View. (see Select Readouts).
To change the Date Format:
1. Make sure you are in Advanced User Mode, then highlight Date Format on the Setup
menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Date Format.
(mm/dd/yy, dd.mm.yy or yy.mm.dd, Default = mm/dd/yy)
87
Download from Www.Somanuals.com. All Manuals Search And Download.
NMEA Output
(Advanced)
NMEA Output turns the NMEA* output on or off. This menu choice is available only when in
Advanced User Mode (see Setup Menu Tab: User Mode.) NMEA Output should be turned On if you
connect the NMEA Output wires of the GPS Receiver cable to another NMEA-compatible device,
such as an autopilot.
*NMEA 0183 is a National Marine Electronics Association standard for data communication.
The following NMEA sentences are output when NMEA Output is turned On:
DPT- Depth
MTW - Water Temperature
GLL - Lat/Lon Position
GGA - GPS Fix Data
RMC - Recommended Minimum Specific GNSS Data
VTG - Course Over Ground and Ground Speed
ZDA - Time and Date
When navigating, the following NMEA sentences are also output when NMEA Output is
turned On:
APB - Autopilot Sentence B
BWR - Bearing and Distance to Waypoint
RMB - Recommended Minimum Navigation Info
To turn NMEA Output on or off:
1. Make sure you are in Advanced User Mode, then highlight NMEA Output on the Setup
menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the NMEA Output to On or
Off (Off, On, Default = Off).
Sonar
Sonar deactivates Sonar and removes the Sonar Views from the
view rotation. (Off, On, Default = On)
To turn Sonar on or off:
1. Highlight Sonar on the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Sonar to On or Off (Off,
On, Default = On).
88
Download from Www.Somanuals.com. All Manuals Search And Download.
Views Menu Tab
From any view, press the MENU key twice to access the tabbed
Main Menu System, then press the RIGHT 4-WAY Cursor
Control key until the Views tab is selected. This menu tab allows
you to set the available views to either hidden or visible in the
view rotation. The view will be removed from the view rotation
if it is set to Hidden and will be displayed in the view rotation if
it is set to Visible. The following views are available:
• Bird’s Eye View
• Chart View
• Combo View
• WideSide® View (with optional-purchase WideSide® transducer)
• Side Beam View (with optional-purchase QuadraBeam™ transducer)
• Sonar View
• Sonar Zoom View
• 200/83 kHz Split Sonar View
• Big Digits View
• Circular Flasher View
• Screen Snapshot View
• Self Test
• Accessory Test
Views Menu
• GPS Diagnostic View.
To Change the View Status of Any View:
1. Highlight the View main menu tab.
2. Use the UP or DOWN 4-WAY Cursor Control keys to select a View.
3. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the status of the view from
Hidden to Visible.
89
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessories Menu Tab
From any view, press the MENU key twice to access the tabbed Main Menu System, then press the
RIGHT cursor key until the Accessories tab is selected.
If no accessories are attached to the Accessory Bus, no accessory menu choices will appear under the
Accessories tab, only the Screen Snapshot menu choice. If an accessory is attached, however,
additional menu choices that support the accessory will be added automatically. See the Operations
Manual that comes with your accessory for detailed information.
Accessories Menu Tab
(no accessories attached)
Accessories Menu Tab
(with accessories attached)
NOTE: Accessories to enable WeatherSense® and the SmartCast® Wireless Sonar Link require separate
purchases. You can visit our website at www.humminbird.com or contact our Customer Resource
Center at 1-800-633-1468 for additional details.
Using Screen Snapshot
Screen Snapshot activates the screen snapshot function.
When Screen Snapshot is enabled, pressing the MARK key creates a saved screen capture on the
optional-purchase MMC/SD card installed in your unit’s card slot. All menus, dialog boxes,
warnings and messages are captured and saved automatically. You can view these captures on
the Screen Snapshot View, which shows thumbnails of the screen captures, three at a time.
NOTE: You must have an optional-purchase MMC/SD card installed for the screen snapshot feature
to work.
To turn Screen Snapshot on or off:
1. Highlight Screen Snapshot on the Accessories main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to turn Screen Snapshot On or Off (Off,
On, Default = Off).
90
Download from Www.Somanuals.com. All Manuals Search And Download.
To make a screen snapshot (Screen Snapshot must be enabled):
1. Make sure you have installed an optional-purchase MMC/SD card into your card slot.
2. From any view you want to capture, press the MARK key. When you start a screen
capture, you will see a message that a waypoint has been created at the point where
your cursor is on the screen, and the screen will freeze. A status dialog box will appear
that shows the progress of the save, and that displays the numbered filename assigned
to the .BMP file that is being created, along with the percentage completed status.
NOTE: Navigation is not affected by the Screen Snapshot feature. Also, if Screen Sanpshot is
enabled but there is no GPS receiver connected, pressing the MARK key will capture the screen
image and display an error saying that a GPS position fix is required to create a waypoint.
NOTE: The speed of the capture depends on the type of card you use; in general, SD cards capture
the screen faster than MMC cards do.
To view screen snapshots:
1. Make sure that the optional-purchase MMC/SD card used to capture the screens is
installed in your card slot.
2. Press the VIEW key until you see the Screen Snapshot View.
3. The Screen Snapshot View displays up to three thumbnails of these screen captures at a
time. You can scroll through the whole list of thumbnails of screen captures in this view
using the 4-WAY Cursor keys. The selected thumbnail will be highlighted with arrows.
See the full-sized image by selecting a thumbnail (using the Up or Down 4-Way Cursor
keys), then using the Right 4-Way Cursor key to view the full image. A border around the
full-size screen capture indicates that it is just a screen capture, not a “live” view. You can
delete the selected image, or all captured images, using Delete Image or Delete All
Images from the Screen Snapshot X-Press™ menu. (See Screen Snapshot X-Press™ menu:
Delete Image and Delete All Images for more information).
NOTE: You may view data files associated with each screen snapshot by removing the MMC/SD
card from your unit and installing it in your optional-purchase MMC/SD card reader connected to
a PC. Use Windows Explorer to see the contents of your MMC/SD card; you will notice that a .DAT
(may show up as .TXT) file is created for every .BMP screen capture; this data file includes the
thumbnail view, and is required in order to be able to view the screen snapshot from your 700
series unit, so don’t delete these files.
91
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Before contacting the Humminbird® Customer Resource Center, please read the following
section. Taking the time to review these troubleshooting guidelines may allow you to solve a
performance problem yourself, and therefore avoid sending your unit back for repair.
700 Series™ Doesn’t Power Up
If your 700 Series™ Fishing System doesn’t power up, use the Installation Guide that also comes
with it for specific confirmation details, making sure that:
•
•
The power cable is properly connected to the 700 Series™ Fishing System control head.
The power cable is wired correctly, with red to positive battery terminal and black to
negative terminal or ground.
•
•
The fuse is operational.
The battery voltage of the power connector is at least 10 Volts.
Correct any known problems, including removing corrosion from the battery terminals or wiring,
or actually replacing the battery if necessary.
700 Series™ Defaults to Simulator with a Transducer Attached
A connected and functioning transducer will cause the newly-started 700 Series™ Fishing System
to go into Normal operating mode automatically. If, when you power up the 700 Series™ Fishing
System, it goes into Simulator mode automatically, even though a transducer is already
connected, this means that the control head is not detecting the transducer. Perform the
following troubleshooting tasks:
•
Using the Installation Guide that also comes with your 700 Series™ Fishing System,
check to make sure that the transducer cable is securely connected to the 700 Series™
Fishing System. Reconnect if necessary, and power up the 700 Series™ Fishing System
again to see if this fixes the problem.
•
•
Replace the non-functioning transducer with a known good transducer if available and
power up the control head again.
Check the transducer cable. Replace the transducer if the cable is damaged or corroded.
92
Download from Www.Somanuals.com. All Manuals Search And Download.
Display Problems
There are several main conditions or sources of possible interference that may cause problems
with the quality of the information displayed on the control head. Look in the following table for
some symptoms of display problems and possible solutions:
Problem
Possible Cause
The control head loses power
at high speeds.
If the power output of your boat’s engine is
unregulated, the control head may be protecting itself
using its over-voltage protection feature. Make sure the
input voltage does not exceed 20 Volts.
When the boat moves at
higher speeds, the bottom
disappears or suddenly
weakens, or the display
contains gaps.
The transducer position may need to be adjusted. A
mix of air and water flowing around the transducer
(cavitation) may be interfering with the interpretation
of sonar data. See your Installation Guide for
suggestions on adjusting the transducer position.
Electrical noise from the boat’s engine may be
interfering with sonar reception. See Finding the Cause
of Noise for more information.
There are no fish detected,
even when you know they are
in the water under the boat,
or sonar readings seem weak
or faulty.
Sonar readings may be affected if the transducer is not
positioned correctly (i.e. mounted at an angle, not
straight down), or there is some kind of mechanical
interference, either because it is mounted inside a hull
that is too thick for proper sonar transmission, the bond
between the transducer and the hull is not airtight, or
because the transducer is dirty. Check with your
Installation Guide for guidance on re-positioning the
transducer, and make sure the transducer is clean.
Low battery voltage may be affecting the power of
signal transmission.
Electrical noise from the boat’s engine may be
interfering with sonar reception. See Finding the Cause
of Noise for more information.
93
Download from Www.Somanuals.com. All Manuals Search And Download.
Finding the Cause of Noise
Electrical noise usually affects the display with many black dots at high speeds, and high
sensitivity readings. One or more of the following sources can cause noise or interference:
Possible Source of Noise
Other electronic devices
Isolation
Turn off any nearby electronic devices to see if the
problem goes away, then turn them on one at a time to
see if the noise re-appears.
The boat’s engine
To determine whether the boat’s engine is the source
of the noise, increase the RPMs while the boat is in
neutral and stationary to see if the noise increases
proportionately; if noise appears when you rev the
engine, the problem could be the spark plugs, alternator,
or tachometer wiring. Replace the spark plugs with
resistor plugs, install an alternator filter, or route the
control head power and transducer cables away from the
engine wiring.
Turbulence created by the propeller can cause noise;
make sure the transducer is mounted at least 15” (38 cm)
from the propeller, and that the water flows smoothly
over the face of the transducer at all times.
Cavitation from the boat’s
propeller
94
Download from Www.Somanuals.com. All Manuals Search And Download.
700 Series™ Fishing System Accessories
Accessories customize the 700 Series™ Fishing System to your needs and enable you to stay on
the edge of new technology. When an accessory is connected to the 700 Series™ Fishing System,
additional menus and readouts are added automatically to the Main Menu System. Accessories
available today that are supported by your Fishing System include:
WideSide® transducer: purchase and connect the WideSide® transducer to your 700 Series™
Fishing System to access specialized "side looking" functions that are extremely useful for
bank fishing or looking for bait fish in open water.
QuadraBeam™ transducer: purchase and connect the QuadraBeam™ transducer to your 700
Series™ Fishing System to access specialized QuadraBeam™ functions such as two 45° 455
kHz beams for a continuous 90° of uninterrupted side to side coverage to 160 feet. These Side
Structure locating beams reveal fish and structure to the left and right of your boat near the
bottom.
WeatherSense® Fishing Condition Monitor: purchase and plug in the WeatherSense®
accessory to your 700 Series™ Fishing System to obtain barometric pressure readouts and
trend data in real time.
GPS Connection Cable: purchase the GPS Connection Cable in order to connect a handheld
or other NMEA* GPS-compatible device that you may already own to your 700 Series™ Fishing
System.
*NMEA 0183 is a National Marine Electronics Association standard for data communication.
Wireless Sonar Link (WSL): Purchase the Wireless Sonar Link (WSL) accessory to receive remote
sonar signals from a SmartCast® Remote Sonar Sensor (RSS). Radio signals from the RSS are
received by the WSL and are transmitted over the Accessory Bus to the 700 Series™ Fishing
System.
PC Connect Cable: Purchase the PC Connect Cable to connect the 700 Series™ Fishing System to a
PC in order to upload product software updates and new features obtained from
www.humminbird.com. This accessory requires the MSWindows-compatible HumminbirdPC™
software downloaded from our website to your PC in order to communicate with the 700 Series™
Fishing System.
Be sure to check out our website www.humminbird.com for additional new and exciting
accessories to grow your 700 Series™ Fishing System!
NOTE: Each accessory requires a separate purchase. You can visit our website at
www.humminbird.com or contact our Customer Resource Center at 1-800-633-1468 for
additional details.
95
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Depth Capability.......................................................................................... 1500 ft (500 m)
Power Output ...................................... 500 Watts (RMS), 4000 Watts (Peak to Peak)
Operating Frequency ...................................... 200 kHz and 83 kHz DualBeam PLUSTM
Area of Coverage............................................................................ 60° @ -10 dB in 83 kHz
20° @ -10 dB in 200 kHz
Target Separation.......................................................................... 2 1/2 Inches (63.5 mm)
Power Requirement.............................................................................................. 10-20 VDC
LCD .................................................................................................................... 640 V x 320 H
Transducer.............................................................................................................. XHS-9-20-T
Transducer Cable Length .................................................................................... 20 ft (6 m)
NOTE: Humminbird® verifies maximum stated depth in saltwater conditions, but actual depth
performance may vary due to transducer installation, water type, thermal layers, bottom
composition and slope.
NOTE: Product specifications and features are subject to change without notice.
96
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
Sonar Terms:
Alarm, Depth: Depth Alarm is a user-controllable, audible alert that sounds when depth is less
than or equal to the setting.
Alarm, Temperature: Temperature Alarm is a user-controllable, audible alert that sounds when
the water surface temperature equals the setting.
Backlight: Backlight is a user-controllable illumination for the LCD for night and low light use.
Beam (Sonar Beam): A sonar beam is the wide, cone-shaped projection of sound waves formed as
sound travels underwater. See Cone Angle.
Big Digits View: Big Digits View is a Humminbird® feature that displays the sonar graph and
enlarged digital readouts for easy reading from a distance. This is a great tool when monitoring
the digital depth is important - such as with higher boat speeds, or when viewing the unit from a
distance. When speed input is available, the Big Digits View also shows the TripLog. See TripLog.
Bottom Black: Bottom Black is a Humminbird® feature that "fills in" the area of the display below
the bottom contour. Bottom Black is preferred by some anglers because of its high contrast and
easy readability, even though it can obscure bottom hardness information.
Bottom Contour: Bottom Contour is the profile of the bottom graphed to the display as the
depth changes.
Bottom Hardness: Bottom Hardness is the density (or composition) of the bottom, which can
often be determined by interpreting the main sonar return. Varying levels of hardness can be
determined by interpreting the "thickness" of the sonar return. Hard returns appear thin and
black, softer returns appear thicker and less black. It is important to note that a sonar return from
a sloping bottom can have the appearance of a softer bottom.
Cavitation: Cavitation is the effect of air bubbles created as the propeller rotates and the boat
moves through the water.
Chart Speed: Chart Speed is a user-controllable feature that sets the speed at which sonar
information moves across the display. A faster setting displays sonar information from more
pings and shows more detail, but the information moves quickly across the display: a slower
setting permits viewing of more sonar history, but does not display as much detail. The best
setting is often the user's personal choice.
Cone Angle: The cone angle is the angular measurement of the sonar beam at a specific dB down
point (i.e. -10 dB). See dB Down Point.
97
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizable Digital Readouts: Customizable Digital Readouts is a Humminbird® feature that
permits the user to select the specific digital information that appears in the main Sonar view (i.e.
Speed, Temperature, Barometric Pressure, TripLog, etc.)
Dead Zone: The dead zone is the area of the sonar beam that receives the sonar signal after the
main bottom return. Fish and other objects close to the bottom that fall within the dead zone will
probably not be visible in the sonar beam. Precision sonar beams, such as the Humminbird® 20°
beam, have a smaller dead zone than wider sonar beams.
Decibel: A Decibel is the measurement for sound pressure level, or "intensity" of the sonar return.
See dB Down Point.
dB Down Point: The dB Down Point is the standard decibel level at which the sonar cone angle is
measured, and is written as "@ -10 dB" or "@ -3 dB". Measurements at smaller down points (bigger
negative numbers) indicate that the less intensive sonar signals are being used for the
measurement.
Display, FSTN: FSTN is an acronym for Film Super-Twist Nematic. FSTN is a monochrome display
technology characterized by black, high-contrast pixels. All monochrome fixed mount
Humminbird® products use FSTN technology.
DualBeam PLUS™: DualBeam PLUS™ is a Humminbird® sonar configuration that uses two sonar
beams simultaneously, and combines the information from both beams into one view by
overlapping the data on-screen, or shows each beam individually side by side, or permits each
beam to be viewed individually full screen.
Feature Memory: Feature Memory is a Humminbird® feature that retains the user's menu
settings in permanent memory. Settings are retained even when the unit is powered off
indefinitely.
Fish Arch: A Fish Arch is the apparent "arch" that appears on the display when any object moves
through the sonar cone. The arch results from a gradual decrease in distance to an object as it
moves into the sonar cone. The distance to an object changes due to the conical shape of the
sonar beam, which causes the distance to be greater at the edges of the beam than at the center
of the beam. When this distance change is graphed on the display, an arch appears.
Fish ID+™: Fish ID+™ is a Humminbird® feature that uses advanced sonar processing algorithms
to determine if a detected object is likely to be a fish. When the sonar signal from an object meets
strict parameters, the unit draws a Fish Symbol (or icon) and the digital depth of the target. On
DualBeam and DualBeam PLUS™ units, fish detected in the narrow center beam are shown as
shaded symbols, and fish detected in the wider beam are shown as hollow symbols.
Fish Symbol: A Fish Symbol is the graphic that is displayed on the screen when Fish ID+
determines that a sonar return is likely to be a fish. See Fish ID+.
98
Download from Www.Somanuals.com. All Manuals Search And Download.
Freeze Frame: Freeze Frame is a Humminbird® feature that pauses the sonar scrolling so that the
image on screen can be studied with greater detail. See Instant Image Update.
Frequency: Frequency is a measure of the number of sound wave cycles per second of a sound
impulse transmitted underwater. A typical frequency for fishfinders is 200 kHz, which offers a
good balance of performance under many conditions. Lower frequencies, such as 50 kHz, are
capable of penetrating to greater depths, but with less resolution. Higher frequencies, such as 455
kHz, offer greater resolution, but are limited in depth performance. Humminbird® uses a variety
of frequencies that are optimized for specific applications.
Grayscale: Grayscale is the use of varying shades of gray to represent the strength of the sonar
signal on the display , and is a very intuitive method of presenting information. Traditionally, the
strongest sonar signals are represented in black, and progressively weaker signals are represented
in progressively lighter shades of gray.
Grayscale, Inverse: Inverse Grayscale is a Humminbird® feature that reverses the correlation of
sonar signal strength and the shade of gray typically used to represent it. The strongest sonar
signals are represented by "white", and progressively weaker signals are represented in
progressively darker shades of gray. While somewhat counter-intuitive, this method makes the
sonar images crisper, and has the benefit of enhancing the apparent sensitivity because the
weaker signals appear bolder. Inverse grayscale works well in very clear water. Debris-laden water
often appears as a lot of clutter on the screen.
Instant Image Update: Instant Image Update is a Humminbird® feature that updates all the sonar
information on the display when Sensitivity and a variety of sonar settings (Bottom View, Range,
etc.) are modified. This differs from the traditional functionality that only updates the new sonar
information collected after the setting change. Instant Image Update permits more accurate fine-
tuning of the display because the user can see the results on the complete sonar graph. When
combined with the Freeze Frame feature, the user can adjust and understand the effects of many
different sonar settings quickly and easily.
Maximum Depth Menu: The Maximum Depth Menu is a Humminbird® feature that optimizes
performance based on the maximum operational depth set by the user. Many Humminbird®
units can operate across a very broad depth range (up to 2500 feet) which causes the unit to
"look" up to that full depth under some circumstances. Due to the speed of sound in water, this
can result in less responsiveness because the unit has to wait for a longer period of time to receive
the sonar signal. When the Maximum Depth menu is set to a lower value, the unit only looks up
to the setting, which increases the responsiveness of the unit. This is an important feature for
anyone operating in shallower depths!
Noise: Noise is unintentional, external sound waves that interfere with the optimal operation of
sonar. Noise appears as random "dots" on the display, and is caused by a variety of sources.
Electrical noise (from trolling motors, bilge pumps, VHF radios) typically manifests as a consistent
99
Download from Www.Somanuals.com. All Manuals Search And Download.
dot pattern. Electrical noise can be isolated by selectively turning on and off other electrical
devices to determine the source. Often re-routing the power cable, or connecting to an alternative
power supply (second battery) can help overcome electrical noise. Hydrodynamic noise (from
propeller and/or hull cavitation) has a more random appearance and is generally related to boat
speed, so that faster operation results in more noise. Hydrodynamic noise can be overcome by
proper transducer installation. Many Humminbird® products have a Noise Filter menu setting
that allows the user to clear the screen of noise that is difficult to eliminate.
Pixels: Pixels are the "picture elements", or small square blocks, that make up the image on the
LCD. Measured as a vertical by horizontal number (i.e. 640V x 320H), this key specification
typically indicates the quality of resolution. In fishfinders, the total resolution (vertical multiplied
by horizontal) is often less important than the "Vertical Pixel" resolution. See Pixels, Vertical.
Pixels, Vertical: Vertical Pixels are a number of vertical picture elements in a single column on an
LCD display. A greater number of vertical pixels provide finer resolution of targets detected by
sonar. Essentially, a vertical distance (the depth), when divided by a larger number, breaks that
distance into smaller samples, each representing a smaller area and thus providing more detail.
In fishfinders, vertical pixels are more critical than horizontal pixels because the horizontal axis of
the display represents time, or history. Sonar information on the horizontal axis can vary greatly,
depending on boat speed and the Chart Speed setting. A greater number of horizontal pixels
show more sonar history that the boat has passed through. On many models, Humminbird®
provides the most vertical pixels to provide a better display resolution. See Chart Speed and Pixels.
Power Output: Power output is the amount of sound energy emitted into the water by the sonar
transmitter. Power output is measured using either RMS (Root Mean Square) or P-T-P (Peak-to-
Peak) measurement systems. Either method is acceptable, but it is important, when comparing
power outputs, to make sure that the same measurement system is being used for both outputs,
because P-T-P numbers are 8 times higher than RMS numbers. Greater power output allows the
sonar signal to penetrate through weeds and thermoclines, reach deeper depths and operate
more effectively in noisy environments, such as when the boat is running at high speed.
Pulse Width (Pulse Length): Pulse Width is the length of time that a sonar sound burst is
transmitted into the water. Shorter pulse widths provide better target separation, but cannot
travel to great depths. Longer pulse widths provide better depth penetration, but result in poorer
target separation. Humminbird® varies pulse width based on depth to optimize both target
separation and depth performance. See Target Separation.
QuadraBeam™: QuadraBeam™ is a Humminbird® sonar configuration that uses four sonar
beams for a more detailed bottom image. QuadraBeam™ uses the DualBeam PLUS™
configuration for downlooking, and also adds two additional beams to look to the left and right.
The sonar beams pointing to the left and right provide the ability to spot fish and structure over
a wide 90° area, and to identify on which side of the boat they are located. See DualBeam PLUS™.
100
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Disconnect Mount: The Quick Disconnect Mounting system is an exclusive
Humminbird® feature that permits the unit to be easily removed from the mounting base by
pressing a release button, and re-installed by simply snapping it back into place. All cable
connections are made when installing, so that no separate wiring connections are required.
Additionally, the mount offers 90° tilt and 360° swivel capability to adjust the viewing angle
of the unit as you move about the boat.
Real Time Sonar: Real Time Sonar is a Humminbird® technology that delivers ultra-fast sonar
transmitter/receiver operation and results in a more detailed instantaneous view of what is
under the boat. The Real Time Sonar window is a vertical band at the right side of the display that
shows the instantaneous sonar return from the transducer at a particular instant. The RTS®
Window menu option permits the user to adjust the window to show the full sonar signal return,
or just a narrower band that indicates intensity using grayscale. Real Time Sonar relies on very fast
Sonar Update Rate (Ping Speed). See Sonar Update Rate.
Receiver: See Transmitter.
Second Return: The Second Return is a term that describes the appearance of a second sonar
return below the primary sonar return (bottom contour) at exactly twice the true depth. The
second return is caused by the same sonar energy bouncing off the bottom once, rebounding to
the water surface and then traveling back down to the bottom to be reflected again. Second
returns are more common in shallow water and over hard bottoms; it is actually possible to see a
third sonar return under some circumstances. The second return provides useful information to
help determine bottom hardness, as areas with harder bottoms will generally create a second
return. The second return can be used as a guide to set Sensitivity when in shallower water.
Sensitivity: Sensitivity is a user feature that adjusts the sensitivity of the sonar system to show
more or less detail in the water. Higher sensitivities are often preferred, however, when the water
contains debris (silt, storm debris, etc.) and it can be difficult to pick out targets. Conversely, if
sensitivity is set too low, relevant targets may be missed.
SONAR: SONAR is the acronym for SOund and NAvigation Ranging. Sonar technology uses
precision sound bursts transmitted underwater to determine the distance and other attributes of
objects in the water. Distance can be determined because the speed of sound in water is constant,
and the time for the signal to return is measured. Sound also travels very quickly underwater,
making sonar a responsive, cost-effective tool. Sonar is the basic technology behind all
recreational and commercial fishfinding and depthfinding devices.
Sonar Echo Enhancement: Sonar Echo Enhancement is a Humminbird® feature that describes the
high degree of sonar sensitivity achieved through a combination of transmitter/receiver and
software algorithms. The result of Sonar Echo Enhancement is to display virtually everything in
the water that is of interest to the angler, including bait fish, game fish, thermoclines, weed beds,
subtle structure, and more.
101
Download from Www.Somanuals.com. All Manuals Search And Download.
Sonar Update Rate: Sonar Update Rate is the number of times per second that the
transmitter/receiver sends and receives sonar signals. A very fast sonar update rate collects more
information and provides a more detailed image of the bottom, fish and structure. Many
Humminbird® units operate at up to 40 times per second when in single frequency operation.
Due to the limitation of the speed of sound in water, the update rate begins to slow as depth
increases to deeper than 50 feet. In very shallow water (less than 10 feet), however, update rates
as much as 60 times per second can be achieved.
Speed: Speed is the rate at which the boat moves through the water. Boat speed can be measured
as Speed Over Ground or Speed Through Water. Speed Over Ground is provided by GPS, and is the
measurement of the boats progress across a given distance. Speed Through Water is provided by
a speed paddlewheel, and is the measurement of the flow past the boat, which may vary
depending on current speed and direction. Speed Through Water is most critical for anglers using
downriggers, as it impacts the running depth of the down riggers. Speed Over Ground is optimal
for navigation, as accurate destination times can be derived from this measurement.
Humminbird® products allow for input and display of both sources.
Structure: Structure is a general term for objects on the bottom that present a discontinuity and
are a likely attractor for fish. This includes bottom contour features (drop-offs, humps, and holes),
standing structure (stumps, timbers, brush piles) and a wide range of other potential objects
(sunken boats, reefs). Humminbird® units excel at showing structure with great detail over a
wider area due to unique sonar configurations developed for the angler.
Structure ID®: Structure ID® is a Humminbird® feature that describes the traditional grayscale
method of presenting sonar information. See Grayscale.
Surface Clutter: Surface Clutter is a phenomenon where sonar returns are reflected off of tiny
objects near the surface of the water, including algae and even air bubbles. Typically, saltwater
environments have significantly greater surface clutter than freshwater due to continuous wind
and wave action that causes aeration at the surface. The Surface Clutter menu provides manual
control to bias the default settings under extreme conditions.
Target Separation: Target Separation is the measurement of minimum distance that a
fishfinder needs to be able to recognize two very close objects as two distinct targets (i.e. two
fish hanging very close, or a fish hanging very close to structure). Humminbird® findfinders
provide a very good 2 1/2 inches of target separation in shallower than 100 feet of depth.
Target separation decreases as depth increases due to the need for longer Pulse Width to
achieve greater depth. See Pulse Width.
Thermoclines: Thermoclines are water layer(s) of distinctly different temperatures that create a
sonar reflection due to the density of the differing water temperatures. Typically a thermocline
will appear as a continuous band across the display at some distance above the bottom contour.
Thermoclines are of interest to anglers because fish will suspend above or below the thermocline
as they seek the optimum temperature and oxygen levels.
102
Download from Www.Somanuals.com. All Manuals Search And Download.
Time Variable Gain: Time Variable Gain is a processing step applied to the sonar return to
"normalize" the data so that objects of equal size (i.e. fish) appear to be the same size, even if they
are separated by a good distance. Time Variable Gain is a fundamental attribute of good sonar,
but is often promoted as a feature.
Total Screen Update®: A Humminbird® feature that refreshes and updates all the sonar
information on the display when a range change occurs. Without Total Screen Update®, only the
most recent sonar information would be drawn to the new range, and the old sonar information
would continue to scroll off the screen at the old range.
Transducer: The transducer is part of the sonar system, which mounts on the boat and is in
contact with the water, that converts the electrical energy from the transmitter into sound
energy, and that forms the sonar beam in turn. Internally, the transducer consists of one or more
piezo electric disks that expand by very minute amounts to create the sound wave. This element
also works in reverse, converting the returned sound energy back into an electrical signal that the
receiver interprets. Transducers are available for many specific mounting applications for the
boat, such as a transom mount, trolling motor mount, etc. Humminbird® offers many
sophisticated transducers, often with multiple piezo electric elements designed to form
specifically-shaped sonar beams, providing the angler with superior tools for finding and catching
fish. See Transmitter and SONAR.
Transmitter: The transmitter and receiver are matched parts of the sonar system that send
(transmit) and listen to (receive) the sonar signals, and work in conjunction with the transducer.
Humminbird® transmitters have an extremely fast cycling design that can send signals up to 60
times per second, as well as produce the varying levels of power output needed for different
depths and conditions. Additionally, the transmitter has the capability to create very precise sonar
pulses needed for a high degree of target separation. Humminbird® receivers are extremely
sensitive, but within a narrow "bandwidth" to discriminate against noise from external sources.
Additionally, the receiver offers a wide "dynamic range" which provides the ability to receive very
strong signals alternating with very weak signals, without the strong signal overwhelming the
weak signal. See Transducer and Noise.
TripLog: TripLog is a Humminbird® feature that provides an on-screen counter for Elapsed Time,
Average Speed and Total Distance traveled, and requires a speed input to activate the feature.
TripLog appears on the Big Digits View, and can be reset to zero through the TripLog menu.
TrueArch®: TrueArch® is a Humminbird® feature that provides true fish arches, not artificial
arches or symbols. Humminbird® units are capable of producing fish arches due to the wide 60°
sonar beam of DualBeam PLUS™, an extremely sensitive sonar receiver. See Fish Arch.
Viewing Angle: Viewing Angle is an attribute of an LCD that characterizes visibility of the
display when viewing from off the central access, such as when standing to the side of the
fishfinder. Wider viewing angles are better because the information remains visible even
when viewing from the side.
103
Download from Www.Somanuals.com. All Manuals Search And Download.
WhiteLine®: WhiteLine® is a Humminbird® feature that highlights the strongest sonar return on
the display using a very light gray band. This is preferred by some anglers who have grown
accustomed to the feature on paper graph chart recorders.
WideSide®: WideSide® is a Humminbird® sonar configuration used in an optional transducer.
WideSide® uses three sonar beams pointing to the left, right and down. Beams pointing to the left
and right are effective for spotting fish and structure near the surface or on the bank. The
downlooking beam provides depth information directly below the boat.
X-Press™ Menu: X-Press™ Menus are a Humminbird® feature that make the most commonly-
used menu selections available with one press of the MENU key. Items that appear on the
X-Press™ Menu are related to the current view, and present the most logical choices for that view.
Sonar View X-Press™ menus will differ from Chart View X-Press™ menus, etc. X-Press™ menus are
one of the principal reasons that Humminbird® products are easier to use.
Zoom: Zoom is a feature that focuses in on a smaller area of the bottom to provide enhanced
resolution. With enhanced resolution, the angler can more easily see fish hanging in structure or
multiple fish hanging close together. Split screen zoom divides the display into the full range view
on the right, and the zoomed view on the left. Humminbird® offers One-Touch® Zoom which
allows the zoom feature to be easily accessed from the regular sonar view with just one key press,
eliminating the need to use menus to access the feature.
Zoom, Bottom Lock: Bottom Lock Zoom is a feature that focuses on a smaller area just above
the bottom to provide enhanced resolution. Unlike regular zoom, it continuously graphs the
bottom at a constant point on the display regardless of changes in depth. This "flattens" out
the bottom contour, but is effective at showing fish on or near the bottom, and is preferred
by many saltwater anglers.
104
Download from Www.Somanuals.com. All Manuals Search And Download.
GPS & Navigation Terms:
Acquisition Time: The length of time that a GPS receiver typically takes to determine a position
from at least three satellites. Humminbird® GPS receivers provide very fast acquisition times
(under one minute), permitting users to get out on the water faster.
Alarm, Arrival: The audible alert that sounds when the boat is equal to or less than the alarm
setting (25 feet–3000 feet) from the location of the destination waypoint.
Alarm, Drift: Drift Alarm is an audible alert that sounds when the boat is equal to or over the
alarm setting (25 feet–3000 feet) from the location where the alarm was turned on.
Alarm, Off-Course: Off-Course Alarm is an audible alert that sounds when the boat’s distance
from the intended Track, (Cross Track Error), is equal to or over the alarm setting (25 feet – 3000
feet). See Track and Cross Track Error.
Altitude: Altitude measures height above sea level. Altitude is a measurement that can be
provided by GPS.
Bearing (BRG): Bearing is the direction to a destination waypoint measured in degrees from
North (i.e. 321°, where 000° is North, 090° East, 180° is South, 270° is West).
Chartplotter: Chartplotter describes a navigation device that shows Present Position on a Map,
along with Tracks, Waypoints, and Routes. All Chartplotters are also considered Trackplotters. All
Humminbird® GPS Combo units are Chartplotters. See Trackplotter.
Cold Start: Cold Start refers to the procedure that a GPS receiver must perform when it does not
have historical information regarding its current location. This procedure typically lasts for several
minutes, and may be experienced upon first power up of the receiver, or if the receiver has been
moved a great distance.
Course Over Ground (COG): Course Over Ground is the current direction the boat is traveling
measured in degrees from North (i.e. 321°, where 000° is North, 090° East, 180° is South, 270° is
West). When the Course Over Ground is equal to Bearing, the boat is said to be “On Course” and
will arrive at the destination in the most efficient manner. COG is often confused with Heading.
See Heading.
Cross Track Error (XTE): Cross Track Error is the straight-line distance of the boat from the
intended Track. XTE measures how far the boat is off course, and also triggers the Off Course
Alarm. See Track.
Differential GPS (DGPS): Differential GPS is a system to improve the position accuracy of the
Department of Defense GPS through the use of secondary “correction signals” broadcast from
ground stations around the coastal United States and on some inland waterways. These
correction signals are provided by the USCG and received by an auxiliary Differential Beacon
105
Download from Www.Somanuals.com. All Manuals Search And Download.
Receiver (DBR) that connects to the GPS receiver. The advent of WAAS has largely negated the
need for the added expense of a DBR in the United States.
Distance To Go: Distance To Go is the straight-line distance between Present Position and the
Destination Waypoint. DTG and SOG (Speed Over Ground) are used to calculate Time To Go. See
Time to Go and Speed Over Ground.
Estimated Position Error (EPE): Estimated Position Error is a calculation that indicates the potential
position inaccuracy the user may experience due to a variety of GPS factors which include satellite
position in the sky, signal strength and others factors.
Fix Type: Fix Type indicates whether the GPS receiver is providing 2D fix or 3D fix. A 2D fix requires
only three satellites and provides only latitude and longitude. A 3D fix requires four or more
satellites, and provides latitude, longitude and altitude.
GPS: GPS is an acronym for Global Positioning System. GPS provides accurate position (latitude,
longitude, altitude) information virtually anywhere on the earth through satellite technology and
personal receivers on the ground. A series of geosynchronous satellites broadcast a unique signal
toward the earth once per second. A GPS receiver, such as that included with many Humminbird®
products, receives the signals from these satellites and is able to determine position based on very
slight differences in the time each signal is received and the receiver’s knowledge of the location
of each of the satellites.
Heading: Heading describes the direction the boat is pointing and is measured in degrees (i.e.
321°, where 000° is North, 090° East, 180° is South, 270° is West). Due to wind and waves, the
boat is often traveling in a slightly different direction than it is heading, and therefore Heading is
often confused with Course Over Ground. See Course Over Ground.
Map Datum: A Map Datum refers to a particular survey of the earth’s surface that was referenced
when creating a chart (i.e. WGS84). Since the earth is not flat, and not even consistently round, a
mathematical model must be used to translate coordinates from the sphere of the earth to the
flat surface of a chart. This mathematical model is the Map Datum. Historically, many different
Map Datums have been used around the world to create maps; often a reference to the Map
Datum can be found in the legend of a paper map. It is important to select the correct Map Datum
setting in your fishfinder when comparing GPS position to a paper chart to avoid slight position
inaccuracies. Almost all electronic charts use the WGS84 Map Datum and therefore, they do not
require setting changes.
MMC: MMC is an acronym for Multi Media Card. An MMC is a postage stamp-sized memory
device used to store electronic data such a maps, waypoints, routes and other information. MMC
is a very rugged format suitable for the marine environment, but it is not waterproof. The MMC
is removable from Humminbird® products, and can be used in a PC that is equipped with an
appropriate card reader. MMC is the same format that many digital cameras use. See SD.
106
Download from Www.Somanuals.com. All Manuals Search And Download.
North, Magnetic: North is the principle reference point of the compass (i.e. North is 000°).
Magnetic North relies on the earth’s magnetic field to align a metal pointer generally towards
True North. However, due to local variations in the earth’s magnetic field around the globe, the
difference between True North and Magnetic North can be greater than 10°. See True North.
North, True: North is the principle reference point of the compass (i.e. North is 000°). True North
uses the axis of the rotation of the earth as the reference for North and is constant for all points
on the earth. Most GPS units default to True North as the setting. The GPS heading may vary from
the boat compass heading because the compass uses Magnetic North. Humminbird® GPS units
provide the option of selecting True or Magnetic readouts by using the North Reference menu.
See Magnetic North.
Present Position: Present Position is the current location (latitude, longitude) determined by GPS.
The Present Position is indicated on-screen by a directional boat icon if the boat is moving, or a
round symbol if the boat is stationary.
Route: A Route is series of waypoints linked together in a specific sequence to define a navigation
path between two points, and saved in the fishfinder’s memory. Routes are often used when
frequently traveling between two or more locations because it is a faster and more accurate
method than repeatedly selecting individual waypoints each time one travels through the same
area. Routes consist of a Start Waypoint, an End Waypoint, and a series of waypoints in between.
Users can begin navigation at the beginning, the end (to run the route in reverse) or at any
waypoint in between. See Waypoint.
SD: SD is an acronym for Secure Digital. An SD card is virtually identical in function to an MMC;
however, the speed at which information can be accessed is generally faster, the storage capacity
is generally larger, and the card has security features which can be used to prevent extracting the
data from the card. SD is the same format that many digital cameras use. See MMC.
Selective Availability: Selective Availability (SA) is a GPS system “feature” that can be
implemented by the U.S. Department of Defense (DoD) to degrade the accuracy of GPS
positioning information. With SA active, the GPS is accurate to within 100 meters 95% of the time.
With SA inactive, the GPS is accurate to within 45 meters 95% of the time. Currently, SA is inactive
and the consumer can enjoy the greater precision GPS provides; however, the DoD reserves the
right to activate SA at any time.
Speed Over Ground (SOG): Speed Over Ground is the measurement of the boat’s progress across
a given distance, and is the speed measurement provided by GPS. An alternate, Speed Through
Water, is provided by a speed paddlewheel, and is the measurement of the flow past the boat,
which may vary depending on current speed and direction. Speed Over Ground is optimal for
navigation because accurate destination times can be derived from this measurement.
Humminbird® products allow for input and display of both speed measurements.
107
Download from Www.Somanuals.com. All Manuals Search And Download.
Time To Go (TTG): Time To Go is the estimated time required to reach the destination waypoint.
TTG is calculated using the SOG and DTG. See SOG and DTG.
Track: A Track is a series of saved points that define the past path of the boat. These Track Points
are saved at regular time intervals. Tracks are a useful and quick method to see where you’ve
been, and an easy guide to follow to get you back to the starting point. Generally, all GPS units
have a limited number of Track Points that can be saved before the unit runs out of memory and
begins erasing the first track points saved. Because of this, the user can adjust the Track Point
Interval menu to increase the amount of time between when points are saved, and thus extend
the distance covered by a track. Tracks can also be permanently saved to memory, and re-
displayed at the user’s option.
Track Line (TRK): The Track Line is the desired line of travel between two waypoints, and
represents the most efficient path between the two points because it is a straight line. The TRK is
measured in degrees (i.e. 321°, where 000° is North, 090° East, 180° is South, 270° is West). See
Cross Track Error, Course Over Ground.
Trackplotter: Trackplotter describes a navigation device that shows Present Position, along with
Track, Waypoint, and Routes, but NO MAP in the background. See Chartplotter.
Trolling Grid: Trolling Grid is a Humminbird® feature that displays a precise reference grid around
a waypoint. This grid is used as a guide pattern for trolling around a specific area to assure a more
efficient and complete coverage of that area. Trolling Grid resolution be changed by zooming in
or out on the chart. The Trolling Grid can also be rotated on the display to orient it for optimal boat
course for wave and wind conditions.
UTC: UTC is an acronym for Universal Time Constant. UTC is the “standard time” used in
navigation, and is the local time in Greenwich England. (UTC is equivalent to Greenwich Mean
Time (GMT)). To display the correct Local Time in a Humminbird® GPS unit, the user must use the
Local Time Zone menu and select the time zone (i.e. EST, CST).
WAAS: WAAS is an acronym for Wide Area Augmentation System. WAAS is complementary
technology to GPS that provides enhanced accuracy through correction signals broadcast from
Federal Aviation Administration WAAS satellites stationed over the USA. These secondary signals
are automatically received by the standard Humminbird® GPS Receiver. With WAAS signal, GPS
accuracy is improved to within 3 meters 95% of the time. Outside the United States, regional
governmental coalitions have created similar systems such as EGNOS (Europe) and MSAS (Japan).
Waypoint: A Waypoint is the saved location (latitude, longitude) of a point of interest that is
stored in a GPS receiver’s memory. This can include a marker buoy, dock, fishing hole or anywhere
else the user may want to return to. Humminbird® products offer the ability to name and assign
a symbol to the saved location. Depth, Date and Time of Day when the waypoint was created is
also saved.
108
Download from Www.Somanuals.com. All Manuals Search And Download.
Waypoint Target: Waypoint Target is a Humminbird® feature that displays a precise “bull’s eye”
around a selected waypoint. This bull’s eye is used to easily monitor boat position relative to a
waypoint, and is useful for fishing over submerged structure. With Waypoint Targets, a quick look
at the screen lets you know how far off the waypoint the boat has drifted.
109
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
110
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
111
Download from Www.Somanuals.com. All Manuals Search And Download.
Contact Humminbird®
Contact the Humminbird® Customer Resource Center
in any of the following ways:
By Telephone:
(Monday - Friday 8:00 a.m. to 4:30 p.m. Central Standard Time):
1-800-633-1468
By e-mail:
(typically we respond to your e-mail within three business days):
For direct shipping, our address is:
Humminbird
Service Department
678 Humminbird Lane
Eufaula, AL 36027 USA
112
Download from Www.Somanuals.com. All Manuals Search And Download.
|