Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Safety....................................................................... E2
Copyright ................................................................ E3
Glossary................................................................... E4
Reference ................................................................ E5 ~ E6
STB Connections..................................................... E7 ~ E10
Remote Control Unit................................................ E11 ~ E12
Guide of Functions .................................................. E13 ~ E14
Guide of Main Menu................................................ E15 ~ E41
Motorised System.................................................... E42 ~ E45
Troubleshooting Guide ............................................ E46
Menu Map................................................................ E47 ~ E48
Specification ............................................................ E49 ~ E50
E1
Download from Www.Somanuals.com. All Manuals Search And Download.
Copyright
Copyright
• VIACCESSTM is a trademark of France Telecom.
• CryptoWorks(TM) is a trademark of Philips Electronics N.V.
• Irdeto is a trademark of Mindport BV.
• Nagravision is a registered trademark of Kudelski S.A.
• Conax is a trademark of Telenor Conax AS.
• “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
Warning
HUMAX cannot be held responsible for any kind of problems caused by the use
of unofficial software. The use of software versions other than HUMAX official
software will void the manufacturer’s warranty.
It is advised that only the formal software released from HUMAX should be used in
all HUMAX product range.
Caution
To watch Pay Per View programmes, be sure to inform your STB dealer of the STB’s
and Smart card’s serial numbers. So that they can pair your STB with your Smart card.
Otherwise, you cannot watch the programmes because they are scrambled.
Note
When the changed Network Information is sent, Nagravision realizes that the appropriate
satellite/cable service information has been changed. And it will re-organize the service
information based on the sent Network Information. The message “Network Information
updated...” appears on the screen. It is automatically done when changing NIT.
The manufacturer can’t change it because it is provided by Nagravision.
When the user watches it, the message may suddenly appear during AV playback and
simultaneously updating will proceed. (This happens about once a year.)
Since this is not an error in operating, do not turn off the power.
• Information for TV-Cabo subscriber
When user searchs channels, the channel numbers from 001 to 100 are defined
automatically for Nagravision by service provider.
Other channels have the number from 101 in sequence as the receiver searchs
the signal.
• Specifications are for NACI-5700 models.
GB3
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
Glossary
•
Antenna
A device that collects and radiates electromagnetic waves. Includes a satellite dish and
abroadband antenna.
•
•
•
Forward Error Correction(FEC)
A system of error control for data transmission.
Frequency
The number of cycles or events per one second, which is expressed in the unit of Hertz(Hz).
Intermediate Frequency(IF)
A frequency to which a carrier frequency is shifted as an intermediate step in transmission or
reception.
•
Low Noise Block(LNB) Downconverter
A low noise microwave amplifier and converter which downconverts a range of frequencies
to IF range.
•
•
•
•
•
Packet Identifier(PID)
A set of numbers that idenitifies transport stream packets containing data from a single data stream.
Polarisation
Characteristic of an electromagnetic wave determined by the orientation of the electricfield vector.
Quaternary Phase Shift Keying(QPSK)
Phase-shift keying in which four different phase angles are used.
Service
A channel to which a decoder or TV is tuned.
Transponder
An automatic device that receives, amplifies and retransmits a signal on a different frequency.
E4
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference
1. Connect DiSEqC 1.0
All our receivers are designed to be DiSEqC 1.0 compatible. This allows multiple antennas
to be connected to the STB simultaneously.
If you have two or more fixed antennas or LNBs, you can use a DiSEqC 1.0 switch.
1. Connect the coaxial cable from the first LNB to the LNB 1 or LNB A input connector of
the DiSEqC switch.
2. Connect the coaxial cable from the second LNB to the LNB 2 or LNB B input connector
of the DiSEqC switch.
3. Do the same for other LNBs.
4. Connect one end of a Coaxial cable to the RF output connector of the DiSEqC switch
and the other end to the LNB IN socket on the STB.
2. Connect DiSEqC 1.2
Please refer to page GB42.
The Locking Time might take longer than expected during the initial boot if the motorised
system is set “enable” mode.
3. Connect a Satellite antenna
To the digital receiver, you can connect either a single satellite antenna directly or through
converter box several antennas or LNB of multi-feed equipment.
You can connect a further Sat-receiver(for example analogue), with the receiver of
common antenna equipment that has satellite signals.
• Connect an antenna cable through converter boxes
1. When you assemble several antenna or a multi-feed equipment that has several LNB
(or LNB with several exits), connect each cable from the antenna to a converter box.
2. Connect the output of converter box to “LNB IN”, as in example displayed.
3. When you use a converter box of 0/12V-steerage, connect it to the output “0/12V”
additionally.
For converter boxes of 22KHz- or DiSEqC-steerage, you can skip this point because the
steerage signal occurs through the antenna cable.
4. Loop Through
If you have another analogue or digital STB and you wish to use the same LNB then you
can connect it via the loop through. Connect one end of a Coaxial cable to the LNB OUT
on the STB and connect the other end to the LNB IN on your second STB.
GB5
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Connect a S/PDIF Fiber-Optic cable
If you are watching a programme with a Dolby Digital soundtrack(see page E14) you can
enjoy the higher quality sound of the Dolby Digital audio by connecting the STB to an
external Dolby Digital television or amplifier. Do this by connecting the optical S/PDIF
output of the STB to the optical S/PDIF input of the external Dolby Digital product
(television, amplifier,.....).
6. Software Upgrade
HUMAX digital set-top box is a highly sophisticated product - incorporating one of the best
software applications.
Whenever a problem is found with this software or, in fact, extra functions or enhanced
applications are added, the software in the equipment has to be upgraded.
In order to maintain proper performance of the product, it is essential to have the most
up to date software. The latest news and release of software versions may be found at
It is recommended that users register to HCSA(HUMAX Customer Service Area) and
periodically check for the availability of software upgrade.
There are three methods to upgrade the software:
(a) set-top box to set-top box download(copies the software of the main unit into slave unit);
(b) pc to set-top box download(downloads the software directly from pc to the model
requiring upgrade);
(c) OTA over-the-air(downloads the software where the manufacturer reserves the right to
decide when and where to release through satellite system).
Over The Air(OTA) is simply another alternative for downloading software versions.
However, the manufacturer reserves the right to decide when and where this software
upgrade can take place by "beaming" latest software versions over the air via satellite
systems. Note that OTA is only limited to certain geographical regions mainly due to
different satellites having different footprints(area where the signal can be received).
SUSS(TM) is an official trademark and logo for HUMAX loader software to perform OTA.
The software upgrade via satellite system will only occur under the following circumstances:
1) the equipment should have appropriate loader software;
2) the manufacturer decides to release software downloading via a designated satellite
system;
3) the equipment must be "tuned" properly to the same satellite that the manufacturer uses.
• Note : CRCI-5500 complies with the OTA type of CryptoWorks.
E6
Download from Www.Somanuals.com. All Manuals Search And Download.
STB Connections
Front Panel
F1-5000
Free-To-Air
CI-5100
2 Slot Common Interface
VA-5200
2 Smart card
• Warning
To install the unauthorized CAM into CI slot can cause the wrong operation.
Do not reinstall the CAM of the already embedded CAS to prevent the
wrong operation.
E7
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Panel
VACI-5300, CRCI-5500, NACI-5700
2 Slot Common Interface, 1 Smart card
8
9
TV LED(AMBER)
5 STANDBY
1
The LED lights on in TV mode.
Press to switch between Operation and Standby
modes.
2 RADIO LED(GREEN)
6 TV/RADIO
The LED lights on in RADIO mode.
Press to switch between TV and Radio modes.
DISPLAY
Shows service number, error messages,
RCU commands and time in Standby mode.
3
7
8
9
,
Use to change services down/up.
SLOT
4 STANDBY LED(RED)
For a two CA Module with a smart card.
Indicates that the STB is under standby.
SMART CARD
For a Smart cards.
Rear Panel
LNB IN
AUDIO/VIDEO OUTPUT
Audio/video signal from your STB to VCR
or TV.
1
2
3
6
Use to connect an antenna.
LNB OUT
Use it when connecting to another STB.
0/12V OUT
For an external LNB switch.
7
8
RS-232C
Use it when connecting to your PC.
RF OUTPUT
Use to connect a RF signal from your STB to
RF(ANT) input jack on your TV.
4 TV SCART
For the audio/video input of the TV.
RF INPUT
Use to connect a general Aerial Antenna and
CABLE jacks to a RF input jack on the STB.
9
VCR SCART
For the VCR.
5
S/PDIF
10
Output for connection to a digital amplifier.
E8
Download from Www.Somanuals.com. All Manuals Search And Download.
STB Connections
There are several ways of connecting the STB to your existing Audio/TV system.
We recommend using one of the following set-up for best results:
TV only
1. Connect one end of a 21-pin SCART cable to the TV SCART connector on the STB and
the other end to a SCART socket on your TV.
2. Connect one end of a RF lead to the RF OUT connector on the STB and the other end
to the RF IN connector on your TV.
3. Connect your TV antenna to the RF IN connector on the STB for receiving terrestrial
channels.
4. Connect the coaxial cable from the LNB to the LNB IN socket on the STB.
TV with VCR
1. Connect one end of a 21-pin SCART cable to the TV SCART connector on the STB and
the other end to a SCART socket on your TV.
2. Connect one end of a 21-pin SCART cable to the VCR SCART connector on the STB
and the other end to a SCART socket on your VCR.
3. Connect one end of a RF lead to the RF OUT connector on the STB and the other end
to the RF IN connector on your VCR.
4. Connect one end of a RF lead to the RF OUT connector on your VCR and the other end
to the RF IN connector on your TV.
5. Connect your TV antenna to the RF IN connector on the STB for receiving terrestrial
channels.
6. Connect the coaxial cable from the LNB to the LNB IN socket on the STB.
With Hi-Fi System
1. Connect an RCA/Cinch stereo cable from the AUDIO L, R sockets on the back of the
STB to the LINE, AUX, SPARE OR EXTRA input sockets on your Hi-Fi system.
E9
Download from Www.Somanuals.com. All Manuals Search And Download.
TV with VCR and Motorised System(DiSEqC 1.2)
1. Connect one end of a 21-pin SCART cable to the TV SCART connector on the STB and
the other end to a SCART socket on your TV.
2. Connect one end of a 21-pin SCART cable to the VCR SCART connector on the STB
and the other end to a SCART socket on your VCR.
3. Connect one end of a RF lead to the RF OUT connector on your VCR and the other end
to the RF IN connector on your TV.
4. Connect one end of a RF lead to the RF IN connector on your VCR and the other end to
the RF OUT connector on the STB.
5. Connect the coaxial cable from the LNB of your motorised system to the LNB IN socket
on the STB.
6. Connect your TV antenna to the RF IN connector on the STB for receiving terrestrial
channels.
7. Connect the coaxial cable from the LNB to the LNB connector on the DiSEqC 1.2 motor.
E10
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control Unit
E11
Download from Www.Somanuals.com. All Manuals Search And Download.
1
2
NUMERIC BUTTONS
Press to select a service, enter your
PIN code or numeric on the menu.
10 TV/SAT
Press to select the TV/SAT mode.
11 TV/RADIO
INFORMATION(RED)
Press to switch between TV and
Press to display the programme information
box on the screen. And this button functions
same as the RED button on the menus.
Radio modes.
MUTE
12
13
Press to temporarily cut off the sound.
3
4
SOUNDTRACK(GREEN)
Press to display the soundtrack list for the
current service. And this button functions
same as the GREEN button on the menus.
MENU
Press to display the Main Menu on the
screen or return to the screen from
a sub menu screen.
SUBTITLE(YELLOW)
CURSOR
Press to display the subtitle language list
for the current service. And this button
functions same as the YELLOW button
on the menus.
14
Press to move the highlight bar for selecting
options on the menus.
And this button is used to change services
(up/down) and increase or decrease the
audio volume.
UHF(BLUE)
5
6
Press to set the UHF menu.
This button functions same as the BLUE
button on the menus.
OK
15
16
Press to display the service list.
This button is used to select the item
on the menus.
TIME(WHITE)
Press to display the current time on the
screen. Press to reserve services on the
Informaion box or EPG.
And this button functions same as the
WHITE button on the menus.
P+/P-
Programme up/down buttons.
Press to tune to the next or previous
service. Press to move up or down pages
on the menus.
EXIT
7
8
9
HELP
17
18
Press to return to the previous menu and
screen.
Press to display the help box on the screen.
EPG
V+/V-
Electronic Programme Guide button
displays the TV/Radio programme guide.
Volume up/down buttons.
Press to increase or decrease the volume.
RCL(Recall)
Press to select the service that was
previously viewed.
19
STANDBY
Press to switch between Operation and
Standby modes.
•
Please note : The design of Remote Control Unit may be changed without notice in advance.
E12
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide of Functions
Information Box(I-Plate)
The details of service part and event part are automatically
displayed on the I-Plate when pressing the i button(
changing services.
) or
I-Plate is divided into service part and event part.
SERVICE-PART(Left side of the box)
SERVICE PART consists of the following items:
• I-Plate icon, Current time and Dolby Digital symbol
• Service name, Service number,
icons
• Subtitle, Teletext, Scrambling service symbol
(These are automatically displayed when the broadcasting
station provides appropriate information.)
• Signal level and Signal quality bar
EVENT-PART(Right side of the box)
EVENT PART consists of the following items:
• Event name, Event duration time
• Description text of event, State of reserved event
Event Part shows the current and next event information.
button : Use to move from the current event information to
the next event information.
button : Use to move from the next event information to
the current event information.
When the HELP(
)button is pressed under I-Plate display and
there are no detailed event informations in the I-Plate,
the Help window will appear on the screen.
The Help window shows the current Network information, including:
Satellite Name, Frequency, Polarisation, Symbol Rate, FEC...
The detailed information for the event can be displayed by pressing
the HELP(
You can reserve the programme in the event data display mode by
using the WHITE( )button.
)button in the I-Plate with event data displaying mode.
You can reset timer programme Once, Daily or Weekly mode.
When you release the timer programme mode, then you will be
asked to confirm the action.
Changing Services
To change services, do in the following sequence;
1. Press the NUMERIC buttons(0~9) on the remote control unit.
2. Press the
buttons or
buttons.
Or press the RECALL(
), Service-list(OK), EPG(
)mode button.
To switch between TV and Radio services, press the TV/Radio
) button.
(
To select the previous viewed Service, press the RECALL(
)
button.
E13
Download from Www.Somanuals.com. All Manuals Search And Download.
Volume Control
To adjust the volume level, use the
To temporarily stop the volume, press the MUTE(
To cancel mute, press the MUTE(
buttons or
)button.
)button again or press the
buttons.
buttons or
buttons.
Soundtrack
When you want to change the audio language of current service,
press the GREEN( )button firstly.
The on-screen menu is displayed on the top to left side of the
screen.
To change the audio language:
1.
2.
buttons : Use to select the audio on the left, right or both.
buttons : Use to select the audio language you want.
3. OK, EXIT button : When this button is pressed, the Soundtrack
OSD will disappear keeping the selected
Soundtrack language constant.
When the current service is switched, the audio language returns to
the audio language that was selected in previous service. lf the
returned audio language is invalid, the audio language that you
selected from the audio language menu has the priority of playback.
Soundtracks broadcast in Dolby Digital are indicated by
Dolby Digital symbols either side of the respective language
selection in the menu. By selecting such a soundtrack the Dolby
Digital audio will be output by the optical S/PDIF on the STB.
This can be decoded by an external Dolby Digital television or
amplifier, for example.
Subtitle
When the current broadcasting programme provides subtitle, press
the SUBTITLE(
)button to see the current subtitle language list.
To change the subtitle language:
1. Use the
buttons to select a Subtitle language you want.
2. Press the OK button and the selected language is highlighted
and then the Subtitle Language you want is displayed on the
screen.
Press the EXIT button to cancel the Subtitle mode.
Teletext
Use your TV Remote Control Unit to control the Teletext service.
The teletext button doesn’t exist on the STB Remote Control Unit.
When the service supports Teletext, the Teletext icon(
displayed on the I-plate.
) is
E14
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide of Main Menu
1. Select Service
The select service displays the required service list which can be
viewed in Simple or Advanced mode.
2. TV Guide
Your STB has an Electronic Programme Guide(EPG) to help you
navigate through all the possible viewing options.
The TV Guide supplies information such as programme listings and
start and end times for all available services.
In addition, detailed information about the programme listings and
start and end times for all available services.
In addition, detailed information about the programme is often
available in the EPG (the availability and amount of these
programme details will vary, depending on the particular
broadcaster).
3. Parental Control
Access to services and programmes is controlled by a PIN code
(i.e., a 4-digit secret code that is defined by the user).
The very first time you attempt to lock all services(or lock
programmes by ratings), the on-screen menu will instruct you to
assign a PIN code(Later on, if necessary, you can change it).
4. Installation
The Installation mode allows you to have the information of setting
services and newly set services(language, time, organise, search,..)
Furthermore, you can recognize the states of hardware and
software versions and signals from your STB.
5. Utility
This menu provides Calendar and Biorhythm.
E15
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Select Service
To select the desired in the service list, you should firstly
display the service list using OK button. Use
select a service and press OK button. Also use
select a service directly in the service list.
buttons to
buttons to
The contents of service list are as follows:
Simple Service List
1. Use the
buttons to select “Select Service” from the
Main Menu and press the OK button.
2. Use the
buttons to select “Simple” from the Main Menu and
press the OK button.
3. Then the simple service list will appear on the screen.
Advanced Service List
The advanced service list shows twenty services. This list is similar
to the Simple service list except that it shows twenty services.
The full name of the service on the current cursor is displayed
on the bottom of screen.
For Scrambled Service, an icon( ) appears on the right service.
Use the following colour buttons to list various service lists:
The colour button corresponds the following Service List.
• RED
• GREEN (
• YELLOW(
(
)button - service list All
)button - Favourite
)button - Network
• BLUE
• WHITE
(
(
)button - Genre
)button - service list by Alphabetical order
Service Configuration
To change the attributes of a service
1. Use the
in the Service List.
2. Press the MENU(
3. Use the buttons to move to an item(such as genre, favourite,
lock, skip, delete) you want on the Service Configuration screen.
buttons to move a service you want to change
)button.
4. Use the
buttons to select.
Press the OK button to complete.
E16
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide of Main Menu
Service All
1. To display the Service All, press the OK button
Use RED( )button to select the All service list.
2. Select the desired service by using the buttons.
3. Press the OK button to view the selected service.
The service list provides you the Simple mode and Advanced
mode. The right side scroll-bar of the screen displays the
location of the selected service in relation to All services.
Press the RED(
)button to toggle between Simple mode and
Advanced mode.
Service Favourite
1. Press the GREEN(
)button on the remote control unit to select
the Favourite service list.
Note : The groups are labeled in four different alphabet characters
(A, B, C, D).
2. Use the
buttons to select a favourite group that you want.
3. Press the GREEN(
)button to toggle group and service list.
Service Network
1. Press the YELLOW(
)button on the remote control unit to
select the Network service list.
2. Use the
buttons to select a service.
3. Press the YELLOW(
)button to toggle provider and service list.
Note : 1. The provider name is displayed on the left window and
the provider’s services are displayed on the right window.
2. The scroll bar on left of the screen shows the location of
the cursor in the Network. The scroll bar on right of the
screen shows the location of the service from the
selected Network.
Service Genre
1. Press the BLUE(
)button on the remote control unit to select
the Genre service list.
2. Use the
buttons to select a service.
3. Press the BLUE(
)button to toggle Genre and service list.
Note : The scroll bar on left of the screen shows the location of
the cursor in the selected Genre. The scroll bar on right of
the screen shows the location of the service.
E17
Download from Www.Somanuals.com. All Manuals Search And Download.
Service Alphabet Order
1. Press the WHITE(
)button on the remote control unit to select
the Alphabet service list.
2. Use the
3. Press the WHITE(
buttons to select a service.
)button to toggle Alphabet and service list.
Note : The scroll bar on left of the screen shows the location of
the cursor in the Alphabet. The scroll bar on right side of
the screen shows the location of the selected Alphabet
service.
• NACI-5700 models are not applicable.
Service Satellite
1. Press the WHITE(
)button on the remote control unit to select
the Satelite service list.
2. Use the
buttons to select a service.
3. Press the WHITE(
)button to toggle Satellite and service list.
Note : The scroll bar on left of the screen shows the location of
the cursor in the Satellite. The scroll bar on right side of the
screen shows the location of the selected Satellite service.
• Specifications are for NACI-5700 models.
E18
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide of Main Menu
2. TV Guide
You can watch a programme being shown and reserve it in the
TV Guide mode.
To enter the TV Guide mode
Press the EPG(
)button on the remote control unit or select the
TV Guide on the Main Menu.
To select the TV/Radio Guide
Press the TV/Radio(
)button on the remote control unit and
TV Guide will be switched to the Radio Guide.
TV Guide mode includes four different modes.
To select each mode, use the following buttons:
• RED
(
)button : Use to display the current and next
programme list.
• GREEN (
• YELLOW(
)button : Use to display the programme list for
one-week.
)button : Use to display the reserved programme list.
)button : Use to display the simple TV Guide list.
(Quick mode)
• BLUE
(
Now/Next mode
Show the informations of the programmes that are played now
or will be played next time.
This mode consists of the service name, event name,
event duration time, current time and on-screen-display window.
To watch a programme you want through the display window:
• Use the
The selected service will appear on the right display window.
• Use the buttons to select a programme you want.
buttons to select a programme you want.
And then press the OK button on the remote control unit.
The selected service will appear on the right display window.
The selected OSD will be highlighted every time the cursor moves.
To reserve a programme you want:
• Select a programme you want by using the
buttons or
)button.
buttons. And then press the WHITE(
Press the
buttons to watch the programme of previous page
or the programme of next page. Press the YELLOW(
)button
to watch the Reserved programme list.
E19
Download from Www.Somanuals.com. All Manuals Search And Download.
Weekly mode
Shows the information of programmes that will be played for a week.
To watch a programme you want through the display window:
• Press the OK button and then press the
buttons to select
a programme you want. Press the OK button again.
To reserve or cancel programme reservation:
• Select a day you want using the
buttons.
Press the buttons to select a programme you want and
then press the WHITE(
)button.
Reserved mode
Shows the programme lists that you have already reserved on the
TV Guide or Information box.
Maximum eight programmes can be reserved.
This programme list includes service name, date, duration time,
reservation mode and event name.
To cancel the Reserved service, select a programme you want to
cancel using the
buttons and then press the WHITE(
)button.
Quick mode
Shows a simple TV Guide like an Information box.
This mode shows in the A/V playback mode.
• Red vertical line : Indicates the current time.
• Black/white bar : Shows the proceeding state of programme.
• Time range of bar : This consists of three blocks by 30 minutes
per block.
E20
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide of Main Menu
3. Parental Control
You can set a parental guidance rating to each programme
in this mode.
1. When the OK button is pressed after selecting the highlighted
parental control on the initial menu screen, a display window
for entering the PIN code will appear on the centre of screen.
0 0 0 0
** The default PIN code is
.
2. Enter the PIN code on the display window.
(If any problem occurs when entering a PIN code, you cannot
switch to the next mode.)
3. Set the parental guidance rating of highlighted censorship
classification.
The parental level is given as age-based numbers :
no block, 6, 10, 14, 18 and total block. Enter the PIN code
to unlock or lock programmes.
4. To change your PIN code:
• Select the highlighted Old PIN code using the
and then enter your Old PIN code.
buttons
• Enter a New PIN code in the highlighted New PIN code
using the buttons.
• To verify the New PIN code, re-enter a New PIN code in the
highlighted Verify Changed PIN code.
5. When the entered PIN code is correct, then all settings are
completed.
(If the PIN code is wrong, the message “PIN code mismatch”
will be displayed on the display window. When the OK button
is pressed at this time, the Old PIN code is valid and the
cursor is located in the first position of this menu.)
E21
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Installation
This mode allows you to customise, add a new service and
displays the state of the STB. Enter the submenus after selecting
the Installation mode in the Main Menu.
4-1. System Setting
The System Setting mode supports the STB internal settings
according to the connection of the receiver and external units.
This mode includes Language Setting, Time Setting,
A/V Output Setting, UHF Tuning and Other Settings.
Language Setting
Select the language for menu, audio or subtitle.
1. Select the highlighted language setting using the
buttons
in the system setting mode and then press the OK button.
2. Select the highlighted Menu(or Audio, Subtitle) Language and
press the
3. Use the
buttons and the language list will be displayed.
buttons to move to a language you want and then
press the OK button to finish setting.
Menu Language
We support the various menu languages of Europe & Middle East
areas. For Europe areas, there are Czech, Danish, English, French,
German, Hungarian, Italian, Portuguese, Russian, Spanish,
Swedish, Turkish and more.
Also, it includes Arabic, English, French, German, Italian, Persian,
Russian, Turkish for Middle East areas.
• The kind of languages can be changed depending on the country.
Languages are subject to change without prior notice.
Audio Language
Select the default language for audio when changing services.
If you change the current service, your STB will initially select
the previously memorised Audio Language. If the Audio Language
of current service is not provided, at this time, you should reselect
a language on the Audio Language menu.
Languages provided:
Czech, Danish, Dutch, English, Finnish, French, German, Greek,
Hungarian, Italian, Norwegian, Portuguese, Rumanian, Russian,
Spanish, Swedish, Turkish and more.
If no language is provided, then the default language of current
service will be automatically selected.
Subtitle Language
Select the default language for subtitle when changing services.
Language provided: Danish, English, Finnish, French, German,
Greek, Hungarian, Italian, Norwegian, Portuguese, Spanish,
Swedish and more.
E22
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide of Main Menu
Time Setting
You can set the Current Time and Wakeup Time in this mode.
Furthermore, the Service Number in the Wakeup mode and Sleep
Time(standby mode) can be set. When a VCR is connected,
recording can be automatically done according to
Wakeup/Sleep Time Setting.
Current Time
To set the Current Time, enter the Offset value using the
standardised information of current service area.
The time setting will be used as the standardised time for the
I-Plate, TV Guide, Wakeup and Sleep Timer.
Time Offset
Current Time is based on TDT(Time and Data Table) at the stream
of the current service.
Timer
You can select nine kinds of Timer like 1, 2.......8 and Disabled.
If you select “Disabled”, then the other timers will not work. Press the
OK button at timer option to display the Timer table. The Timer
determines the on/off time and can also be used for VCR recording.
Timer Mode
Wakeup/Sleep timer determines the Timer Mode.
• Once
• Daily
: The timer programming is applied only once.
: The timer recording is applied everyday repeatedly.
• Weekly : The timer recording is applied weekly.
(Set one day in a week).
Use the
buttons to select the type of timer programming.
Wakeup Time
Select the time when STB is turned on.
Use the NUMERIC buttons(0~9) on the remote control unit to enter
your Wakeup Time.
Wakeup Service No.
Use the
buttons to set the service number provided for the set
Wakeup Time.
Use the TV/Radio(
TV/Radio service.
) button on the remote control unit to toggle
Service Name
The Service Name that has been determined by the
Wakeup Service No. will be shown.
Sleep Time
Depending on Time Setting, select the time when STB is turned off.
E23
Download from Www.Somanuals.com. All Manuals Search And Download.
A/V Output Setting
Video Output(CVBS/S-Video/RGB)
Set the video mode for the TV SCART output.
Audio Output
Set the audio mode which is output from the TV SCART
and RCA/Cinch Jack. (Stereo/Mono)
Dolby Digital
lf Dolby Digital option is ON and the broadcaster provides
the Dolby Digital stream, the Dolby Digital audio language is
firstly selected when changing the service.
Screen Mode
Select the aspect ratio of TV which is connected to
STB(4:3 or 16:9).
Display Format
Select the format which the video is to be displayed on screen.
When your TV set is 4:3 and video source is 16:9,
STB will display in Letter-box or Centre mode as selected.
When your TV set is 16:9 and video source is 4:3,
STB will display in the Pillar-box or Full mode as selected.
NTSC Mode
Adjust this value between 3.58 and 4.43 if your TV displays the
video only in black and white color. Normally NTSC 3.58 mode is
used worldwide, but some TV sets can support only NTSC 4.43
mode.
UHF Tuning
You select the STB output by using the UHF channel.
Channel
Select an UHF channel. The range of channels and frequency
value are different for each PAL Standard:
PAL I/G for Europe
: CH21 ~ CH69
PAL B for Europe/Australia : CH28 ~ CH69
PAL D for China
PAL K for Russia
: CH13 ~ CH62
: CH21 ~ CH69
PAL Standard
Select a PAL Standard according to the above range of channels.
Offset
Adjust the fine tuning value. The Offset ranges from -4 to +4 and
each Offset represents 1MHz.
E24
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide of Main Menu
Other Setting
Select the OSD Transparency, Information Box Display Time
and so on.
OSD Transparency
Select the OSD Transparent type. It affects Information box,
Soundtrack, Subtitle, Service list, Time and Quick mode of
TV Guide. Use the
buttons to toggle transparent, opaque,
20%, 40%, 60% and 80%.
Info. Box Display Time
Set the display duration of Information box displayed on the screen
after changing services. The time ranges from 0 to 20 seconds.
Menu Background
Set the type of background for the menu to be displayed on.
Changing to Reserved Service
When the reserved time has come during the view of services:
• Manual Mode
This mode shows the message “A reserved event has started on
another service. Press OK to view the reserved service.
Press EXIT to ignore reserved service. (will automatically change
after 10 seconds.)” And ask the presence of change and then
makes a change.
• Auto Mode
The current service will be automatically changed to the
time-reserved service.
Menu Mode
Select NTSC, PAL, AUTO according to your TV type.
In AUTO mode, the menu is automatically selected as NTSC or PAL
according to the service played before the Menu mode is entered.
E25
Download from Www.Somanuals.com. All Manuals Search And Download.
4-2. Service Organising
This menu gives users access to options that allow them to
organise their TV Services, Radio Services and Networks.
0 0 0 0
** The default PIN code is
Organise TV Services
Organise All Services
.
This mode allows users to Delete, Move, Lock, Skip and Rename
TV Services.
• Delete
1. Press the RED(
)button to delete unwanted services.
2. Highlight the services that you want to delete in grey.
3. Press the OK button to confirm.
4. Press the EXIT button to cancel the deletion.
• Move
1. Press the GREEN(
)button to move the service to where you
want to locate.
Then, the icon( ) will be displayed in front of the service number.
2. Use the
buttons to select a new location.
3. Press the OK button to fix the location.
4. Press the EXIT button to return to the original location.
• Lock
1. Press the YELLOW(
)button to lock services.
Then, the symbol “ ” will be displayed at the right side of the
service name.
2. Enter the PIN code to view the locked services.
• Skip
1. Press the BLUE(
Then, the symbol “
service name.
)button to skip services.
” will be displayed at the right side of the
2. Use NUMERIC buttons(0~9), service list or EPG(
)button to
view the skipped services when selecting channels.
Note : You can’t view the skipped services by using
buttons.
• Rename
1. Press the WHITE(
)button to change the service name.
Then, the keyboard image will be displayed on the screen.
2. Key in the new service name.
You can use the four direction keys to move or select the
services.
: to move the previous service
: to move the next service
: to move back by services
: to move forwards by services
Note : The box between service list and the description of the
colour buttons offers the brief information of a service
where the cursor is located.
E26
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide of Main Menu
Organise Favourite A~D
Each of TV and Radio has four Favourite groups.
Each Favourite group contains up to 100 services.
Delete, Move, Lock, Skip or Rename each TV service in a Favourite
TV group and re-group them into your Favourite TV group.
This mode has the same operating methods as “organise all services”.
• When you delete a service in the Favourite group, it will be
available again on the All TV service list. This allows the service
to be removed from the Favourite group.
• You can move the service only within the Favourite group.
• Coloured keys are available when the cursor is located in the
middle window.
(Except when the middle window is disabled(grey).)
To select the Favourite group;
1. Use the
button to move the cursor to “Gr.”-plate(left).
2. Select the wanted favourite group.
To group the services into Favourites;
1. Use the
button to move the cursor to “services”-plate(right).
2. Select the service you want to group into Favourites.
3. Press the OK button.
4. Use the
button to move the cursor to “Favourites”-plate(left).
5. Press the OK button to save the selected group.
Note : 1. Use the
buttons to move the cursor.
2. Use the
buttons to select the previous or next page.
E27
Download from Www.Somanuals.com. All Manuals Search And Download.
Organise Service Genre
The Organise Service Genre feature allows the user to
Delete/Lock/Skip/Rename a service in the selected Genre.
Available genre : Movie, News, Show, Sports, Children, Music,
Art, Education, etc.
The colour buttons function same as ones for Organise All services
except the following differences:
• When you delete a service in the selected genre, it will be
available again on the All TV services list at the right side.
At that time, the genre for the deleted service becomes “etc”.
• You can move the service only in the selected genre.
• Coloured buttons are available when the cursor is located in the
middle window.
To select the Genre;
1. Use the button to move the cursor to “Gr.”-plate(left).
2. Select the wanted genre.
To group the services into a Genre;
1. Use the button to move the cursor to
“services”- plate(right).
2. Select the service you want to group into Genre.
3. Press the OK button.
4. Use the button to move the cursor to “Genre”-plate(left).
5. Press the OK button to save the selected group.
Note : 1. Use the
buttons to move the cursor.
2. Use the
buttons to select the previous or
next page.
E28
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide of Main Menu
Organise Radio Services
The Organise Radio Services functions same as TV Services
except that it uses Radio Services.
You can delete or move Radio Services and change the attributes
of them.
Organise All Services
The Organise All Services lets the user Delete, Move, Lock, Skip
or Rename Radio services on the All Radio services list.
Organise Favourite A~D
The Organise Favourite A~D lets the user Delete, Move, Lock, Skip
or Rename Radio Services from the Favourite Radio Services and
group into a new Favourite Radio Services.
The Radio Services are grouped into a Favourite in the same way
as the TV Services(refer to page E27).
Organise Service Genre
The Organise Service Genre lets the user Delete, Lock, Skip or
Rename Radio Services and group into Radio Service Genres.
Radio Genres include : Pop, Rock, Country, Classic, Jazz, Folk,
News, Show, Sports, Education, User A-D,
etc.
The Radio Services are grouped into a Genre in the same way as
the TV Services(refer to page E28).
E29
Download from Www.Somanuals.com. All Manuals Search And Download.
Organise Networks
You can edit services using the network unit.
• The provider names are displayed on the left side of screen,
and the TV/Radio Services included in the highlighted
Network are displayed on the right side of screen.
Only the Delete, Move, Rename Function can be used
in this mode.
• When TV/Radio Services are too many to be displayed, use
the
the
button to move the cursor to the right window and use
and buttons to move the cursor to the next list.
When the number of services is under 10(NTSC: 8), the scroll bar
is not displayed. In Radio Service icon(
service number.
) is marked in front of
Delete Satellites
1. Press the
buttons to move to the satellite,
Tp, or ALL you want to delete.
2. Press the RED(
) button to select the item you want to delete.
3. Press the OK button to delete.
Press the EXIT button to cancel.
E30
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide of Main Menu
4-3. Service Searching
Enter the PIN code to access the Service Searching menu
as you access the Parental Control or Service Organising menu.
Press the OK button to start Service Search after setting the
parameters.
** The default PIN code is
.
0 0 0 0
Antenna Setting
Selects the antenna and LNB settings for Service search.
As you can change the settings for 22KHz Tone, 0/12V and DiSEqC
switch, there are 32 possible Antenna Setting for use.
The values that are set in this menu will be available for selection in
other service searching menus.
Antenna Alternative
There are 32 antenna alternatives, each one can have different
combinations of settings for 22KHz Tone, 0/12V and DiSEqC switch.
Satellite Name
Selects the Satellite Name that corresponds to the value of the
Antenna Alternative.
1. Press the
buttons to display the satellite list box.
2. Select the wanted Satellite Name.
3. If the desired Satellite Name is not listed then select User
Defined.
4. The keyboard will appear and you can type the Satellite Name
directly.
The selected Satellite Name can help you select the Antenna
Alternative in the searching menu, but it is possible to change
or select the Satellite Name only in the Antenna Setting menu.
Note : In case the selected satellite is used as OTA target satellite,
automatic detection of the OTA target satellite might not work
properly if you change or edit the name of the satellite.
5. Satellite Name is listed in alphabetical order and the order can be
changed according to Menu Language.
6. When inputting the Satellite Name, there is a 14 character limit.
E31
Download from Www.Somanuals.com. All Manuals Search And Download.
LNB Frequency
1. Select the L.O. Frequency that is set to antenna.
2. Use the
buttons to select the LNB frequency(Universal,
5150, 9750, 10600, 10750, 11475MHz or 0, 1, ......., 9).
3. If the required LNB Frequency is not available, then select “0”
and enter the frequency manually using the
NUMERIC buttons(0~9).
4. When you select Universal, both 9750 and 10600MHz are
supported at the same time.
The 22KHz Tone setting is unnecessary. (Disabled)
22KHz Tone
When you use a dual LNB or two antennas connected
to a 22KHz Tone switch box, make 22KHz Tone switch enable or
disable to select LNB or antenna.
0/12Volt Switch
When you use two LNBs or antennas is switched to
0/12V, select what LNB and antenna are used enable or disable.
0/12V terminal is located on the rear of STB.
DiSEqC Input
According to the option and position of DiSEqC switch,
select Disabled, Tone Burst A to B and DiSEqC A to D.
After setting the above mentioned value, press the OK button
to move to the Manual Search menu.
Motorised System
The Motorised System is used to set the DiSEqC 1.2 motor
by Eutelsat specification.
If you wish to use this system, please refer to page E42.
E32
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide of Main Menu
Service Search OSD
• If you press the EXIT button during the search, then
Service Search stops and the searching menu will appear.
• When you find all the services, the following picture appears.
• Before saving it, you can select the services you want to delete.
Found services OSD
• The picture above shows services that are found after Manual
Search.
• Use the RED(
)button to mark the services that you want to
delete.
To unmark a service, select the service and press the
RED( )button again.
• Press the OK button to save, or press the EXIT button to exit
without saving.
• Then Service Search menu appears again. When you exit from
all menus, the first service of the found service list is played.
In the bottom of found service picture, network, the information of
transponder and the number of found service that the services
belong to are displayed.
The deleted service by the RED(
)button is excepted from
counting of the number of services.
The deleted service is not included in this number.
“Free” applies to the empty space of the memory.
It will be used to store future services.
E33
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual Search
Set the search parameters(Frequency, Symbol Rate, etc.) to
manually find the services that you have selected in the
transponder.
The bar on bottom of the submenu shows the signal level and
the signal quality(BER) of the entered parameters.
Antenna Alternative
Select the target antenna for Manual Search.
The Satellite Name helps you select Antenna Alternatives.
This is only for reference and cannot be changed on this menu.
Frequency
Use the NUMERIC buttons(0~9) on the remote control unit.
Polarisation
Use the
buttons to select the Polarisation of the transponder.
(Auto, Horizontal, Vertical)
• Horizontal : 18 V is output through LNB line
• Vertical
: 13.5 V is output through LNB line
Symbol Rate
Inputs the Symbol Rate of the transponder you want to find.
Use the
buttons or Numeric buttons on the remote control unit.
FEC(Forward Error Correction)
Use the
buttons to select the Forward Error Correction of the
transponder. You can select the value of Auto, 1/2, 2/3, 3/4, 5/6
and 7/8.
Network Search
• You can select Yes or No. When you select “Yes”, you can find
more transponders using the home network.
• As it refers to NIT during searching, if there is the frequency
information of other transponder, it searches the other
transponder besides the transponder that the user inputs.
Automatic Skip
• You can select Yes or No. When you select “Yes”, the search
will skip all scrambled services.
• When the found services are scrambled during searching,
they are not listed up.
Refer to descriptor of PMT whether it is scrambled or not.
E34
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide of Main Menu
Advanced Search
Performs a manual search with the ability to enter PID(Video/Audio/
PCR) values. This mode is necessary when you search for the
signal that has abnormal service Infornation tables.
The setting of the sub items is the same as Manual Search.
Video PID/Audio PID/PCR PID
You can set PID to search for services.
1. Use the
buttons to select PID input mode.
2. Use the NUMERIC buttons(0~9) on the remote control unit to
enter a decimal PID value.
3. In the hexadecimal input mode, press one of the NUMERIC
buttons(0~9) to display a hexadecimal keyboard.
4. Enter a hexadecimal PID value.
Note : If no PID is input(Auto is displayed), the Advanced Search
functions same as Manual Search.
5. After the above mentioned value is set, press the OK button to
start Service Search.
Note : The picture and the found service list during Advanced
Search are identical with the ones during Manual Search.
SMATV Search
In case that several generations use Antenna and LNB in common,
as the frequency range of signal is input to STB is down as much as
LNB L.O.(Local Oscillator) frequency, search the service from
950 - 2150MHz.
Frequency
Inputs not RF frequency but the frequency that is down converted
through LNB in common. The unit is MHz and the range of input is
950 - 2150MHz.
Symbol Rate
Inputs the Symbol Rate of the signal you want to find.
FEC
You can select the value of 1/2, 2/3, 3/4, 5/6, 7/8 or Auto.
LNB Power
As there is whether the LNB Power of STB is necessary or not
according to the sort of IF-IF converters, select a suitable option for
situation.
E35
Download from Www.Somanuals.com. All Manuals Search And Download.
Automatic Search
When you enter the Satellite Name that is set in Antenna Setting
menu, search all of the selected satellite without inputting the extra
frequency.
Antenna Alternative
Select the target antenna for Automatic Service Search.
The attribute of this antenna alternative number is already set
in Antenna Setting menu and the Satellite Name is helpful in the
selection of the antenna, but in this menu you cannot change the
Satellite Name.
Search Type
• You can select one of two modes(Quick or Detail).
• When you select Quick mode, it searches the service by search
• parameters that is preset.
• When you select Detail mode, it searches the service through all
field of tuner(950-2150MHz).
Network Search
• You can select Yes or No. When you select “Yes”, you can find
more transponders using the home network.
• As it refers to NIT during searching, if there is the frequency
information of other transponder, it searches the other
transponder besides the transponder that the user inputs.
E36
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide of Main Menu
Detail Mode
The pre-fixed symbol rate list is changed according to Antenna
Alternative and Satellite Name. If you want to add or change it,
press the RED( )button.
** The value of Pre-fixed symbol rates can not be editable.
(22000, 27500)
The picture of the Symbol Rate Add/Change mode is as follows:
1. When you press the RED(
)button after entered to detail
mode from search type, yellow box will be trimmed with red
edges meaning edit is possible.
2. You can easily put optional value with using
NUMERIC buttons(0~9).
3. Press the RED(
)button for confirmation, and you will
successfully exit from input mode.
If press the OK button at symbol rate value input mode,
the value will be confirmed, and if you moves left or right
column use the
symbol rate to input. Then press the EXIT and the
RED( )button to exit from input mode.
buttons, you can differ values of
To delete a Symbol Rate in the above list, press the
0(NUMERIC button) in the selected position and then the
symbol rate disappears.
The range of Symbol Rate that is input additionally is 16-30Ms/s.
Note : The user should select the Satellite name in Antenna
Setting menu. When the user types the Satellite Name
separately, the search type is fixed to the Detail mode.
Press the OK button anywhere to start Automatic Search.
The picture during searching is as follows.
The picture searches with varying frequency, Symbol Rate and
FEC etc. Satellite Name is the name that the user selects to
correspond with Antenna Alternative of Antenna Setting.
The progress bar(%) appears on bottom of the picture.
During the search, services that are found are displayed as follows:
1. Press the EXIT button during Automatic Search to stop search.
2. After the search is finished, the appearite message appears.
3. Press the OK button to return Service Search menu.
E37
Download from Www.Somanuals.com. All Manuals Search And Download.
4-4. Status
STB Status
Displays the information of H/W Version, S/W Version,
Loader Version and CI CAM of STB and so on.
• F1-5000 doesn’t support CI CAM.
Signal Detection
Shows the Signal Level(AGC level) and Signal Quality(BER) of the
current service and is help to the initial antenna setting.
STB Upgrade
You can download and upgrade the software of this STB via a
satellite when the software of new version is released.
Do not turn off the STB during downloading.
When the power is switched OFF, turn on the STB and the
process will be continued.
• CRCI-5500 models are not applicable.
4-5. Common Interface
You can enjoy not only scrambled services using the Conditional
Access Modules(CAM), but also Free-To-Air services.
This STB currently supports six kinds of CAM(VIACCESS™,
Nagravision, CONAX, CryptoWorks(TM), Irdeto or Mediaguard).
Common Interface module and Smart Card depend on the service
provider. If you need CAM, contact your service provider or
distributor.
Note : If CAM is not used, then only Free-To-Air services are
available.
• F1-5000, VA-5200 models are not applicable.
E38
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide of Main Menu
4-6. Conditional Access
For Viaccess Embedded
This menu allows the user to view the information on the
Smart Card and Viaccess conditional access system such as general
Smart Card Information, Service List, Change Maturity Rating and
Change PIN code.
General Smart Card Information
You can see the Unique Address, so user Address, Current Maturity
Rating of the Smart Card.
Service List
Services or Bouquets are encrypted by Viaccess and operators name,
like TPS or ABsat, are displayed on the TV screen.
To get more detailed information of viewing rights of services or
Bouquets, press OK button.
Change Maturity Rating
The STB is required by Viaccess to include a parental control facility
for the viewing of restricted services.
This can be set to “No block” or for ages ranging from 4 to 18.
The correct PIN code is required to change this option.
Change PIN code
When you buy a new Smart Card, the initial PIN code is set to “NULL”.
Therefore, it is recommended that this PIN code should be changed.
This PIN code is available only on Conditional Access Menu.
Enter this PIN code to see the blocked Viacces Service.
• Specifications are for VA-5200, VACI-5300 models.
For CryptoWorks Embedded
This menu allows the user to view and change information on the
Smart Cards such as available entitlements, Maturity Rating and
PIN code. Besides, you can view the mails from programm providers.
General Smart Card Information
Card label will be displayed as issuer’s name on the TV screen.
Programmes or Bouquets which are encrypted by only
CryptoWorks(TM) and distributor labels displayed on the TV screen
such as Wizja TV or MTV Europe and more.
To get more detailed information of viewing rights of channels or
bouquets, press the OK button.
• Smart Card details
You can see smart card address, the validity date and current
maturity rating.
E39
Download from Www.Somanuals.com. All Manuals Search And Download.
Available Entitlements
The user will select a single programme provider by selecting its
distributor label and you can get the information of available
entitlements.
• Subscription
You can see the vaild period of each service.
• PPV(Pay Per View)
If you purchased events in advance, the entitlements of
Pay Per View events will be displayed.
• IPPV(Impulse Pay Per View)
You can purchase an event during the active broadcast of the event
without pre-ordering. The entitlements of Impulse Pay Per View
events will be displayed. In this menu you need PIN code.
Maturity Rating
The STB is required by CryptoWorks(TM) to include a parental
control facility for the viewing of restricted programmes.
This can be set to “Disable MR” or PG(Parental Guide) to over 18.
The correct PIN code is required to change this option.
PIN Code
In this menu you can make PIN code enabled, disabled or changed.
• Enable PIN code
You can enable the PIN code.
• Disable PIN code
You can disable the PIN code.
• Modify PIN code
You can change the PIN code by using the NUMERIC buttons(0~9)
on the RCU. You will need to enter the old PIN code before you can
enter new PIN code.
Mail box
The STB can receive maximum 10 mails from programme providers.
To check and see the mails press the OK button.
In the Mail list you can view or delete the mails.
If you store 10 mails and a new mail arrives, the oldest mail will be
erased and the new mail will be stored.
• Specifications are for CRCI-5500 models.
E40
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide of Main Menu
For Nagravision Embedded
This menu allows the user to view the information on the
Smart card and Nagravision Conditional Access system such as
version and serial number of Smart card.
PPV purchase list
If you perchased events in advance, the entitlements of Pay Per
View events will be displayed. (ID, event name, service name,
start time, status and cost)
Credit information
Displays the Credit information. (ID, credit and status)
System information
Displays the System information.
(Smart card serial number, IRD serial number, Smart card version,
Smart card revision, Conditional Access software version,
Conditional Access software revision.)
• Specifications are for NACI-5700 models.
5. Utility
STB supports additional functions such as Calendar and
Biorhythm.
At the Biorhythm use the
buttons to adjust your birth
year and date to see your current biorhythm status.
E41
Download from Www.Somanuals.com. All Manuals Search And Download.
Motorised System
DiSEqC 1.2 User Instructions
If you have a DiSEqC 1.2 motorised system, then you can use the DiSEqC 1.2 functions available.
The following instruction describes how to use the DiSEqC 1.2 functions to store the positions of the
satellites and to search for the services(STAB Rotor Sat motor recommended).
1. Satellite Setting Menu Options
When DiSEqC Motorised System is Enabled in the Antenna Setting, a new menu is available for
configuring the motor. This menu is called Satellite Setting and is accessed by pressing the OK button
while the option Antenna Alternative is highlighted in the Manual Search menu.
The following options are available on the Satellite Setting menu.
Satellite Name
A selection of satellite names that can be used to identify a motor position. If the satellite name you require
is not available, please use other. In installer mode the Satellite Name Reference refers to the 0 position of
the motor.
Movement
In user mode this is used to fine-tune the position of the motor for better reception.
In Installer mode this is used to search for the position of a satellite manually.
Motor Control
Search : Searches for services on the chosen transponder.
Goto
:
Moves the motor to the stored position of the selected satellite name.
Stores the current position of the motor for the selected satellite name.
Resets all stored positions of the motor relative to the 0 position. (Installer mode only)
Store
Reset
:
:
DiSEqC Command Mode
Changes the current mode between Installer and User.
2. Setting your Receiver for DiSEqC 1.2
You must set your receiver up so that it is ready to use DiSEqC 1.2. To do so, do as follows
1. Press the MENU(
)button, to display the Main Menu.
2. Select Service Searching option and press OK button, to
display the Service Searching menu.
3. Select Antenna Setting option and press OK button,
to display the Antenna Setting menu.
4. You must set up a separate antenna alternative for each
satellite position required.
5. Select the name of the satellite you wish to use.
6. Select the correct LNB frequency for the LNB you are using.
7. Set the Motorised System to Enable using the
8. The option DiSEqC Input Selection should now be disabled.
buttons.
This option is used for DiSEqC 1.0 and cannot be used in conjunction with DiSEqC 1.2.
Your receiver is now ready to use DiSEqC 1.2. To return to the Main Menu, use the EXIT button
until you are at the Main Menu.
E42
Download from Www.Somanuals.com. All Manuals Search And Download.
Motorised System
3. Initial Satellite Position Search
This is required when you first set your receiver up to use DiSEqC 1.2
and sets the positions of all pre-programmed satellites.
1. Make sure your motor is installed correctly with the
calibrations adjusted for the region you are situated.
(Please consult the user manual for your motor.)
2. Make sure your receiver is set up to use DiSEqC 1.2.
(see section 2 above).
3. On the Main Menu, select Service Searching option and
press the OK button, you should now see the Service Searching
menu.
4. Highlight the option Antenna Alternative and press the OK button to display the Satellite Setting menu.
5. Highlight the DiSEqC Command Mode option and use the
buttons to change the value to Installer
and press the OK button.
6. Highlight the Motor Control option and use the
buttons to change the value to reset and press
the OK button.
7. You will now see a warning message, press the OK button to continue. All motor positions of the
pre-programmed satellites should now be correct. If you have any other make or model of DiSEqC 1.2
motor then you may need to store the satellite positions in yourself(Please refer to the user manual
for your motor).
8. Highlight the DiSEqC Command Mode option and use the
buttons to change the value to User
and press the OK button.
9. You should now be ready to start storing services for the various satellites(see 5 onwards).
4. Motor Limit Setting
Use this option to set the East and West limits of the motor. This should be used to prevent your dish from
hitting anything that may be obstructing the path of the dish.
1. On the Main menu, select Service Searching option and press the
OK button. You should now see the Service Searching menu.
2. Select Manual Search option and press the OK button, you should
now see the Manual Search menu.
3. Highlight the Antenna Alternative option and press the OK button.
You should now be in the Satellite Settings menu.
4. Press the
5. Highlight the Limit Setting option and use the
button to access the Motor Limit Setting menu.
buttons to
disable this. (Warning: When this option is disabled your motor will
be able to move beyond any limits that have been stored - please
take care in case there are anything obstructing the path of your
dish.)
6. To set the East Limit:
a) Select Movement and use the
buttons to move your
motor East or West until the motor is at the position you wish to
use as your East Limit. Use the
at the correct position.
buttons to stop the motor
b) Highlight the Store East Limit option and press the OK button to
store the current position as your East Limit.
E43
Download from Www.Somanuals.com. All Manuals Search And Download.
To set the West Limit:
a) Select Movement and use the
buttons to move your motor East or West until the motor is at
the position you wish to use as your West Limit. Use the
correct position.
buttons to stop the motor at the
b) Highlight the Store West Limit option and press the OK button to store the current position as your
West Limit.
5. Manual Satellite Search
The purpose of this is to set the motor position for each satellite manually. This is useful if the satellite you
require is not available from the pre-programmed list(see 3 above).
To do this, you must access the Satellite Settings menu. Do as follows;
1. Select Service Searching from the main menu and press the OK button, to display the Service
Searching menu.
2. Select the Manual Search option and press the OK button, to display the Manual Search menu.
Select the relevant Antenna Alternative that you are using for this satellite.
3. Enter the Frequency, Polarisation, Symbol Rate and FEC of a transponder on the satellite you wish to find.
This transponder information should be unique to this satellite.
4. Select the Antenna Alternative option and press the OK button, to display the Satellite Settings menu.
5. Highlight the option DiSEqC Command Mode and using the
buttons change this to Installer.
6. Highlight the option Satellite name and use the buttons to select the satellite you want to find,
use others if the name of the satellite you want does not appear.
7. When you have selected the satellite you wish to find, go down to the Movement option and again using
the
buttons to start the motor moving.
8. You should move the motor as far west as possible and the move it east so that you cover the
complete movement range of the motor.
9. During the move from west to east the Signal Quality bar should register a signal once. This is the
position of the satellite. If there are two or more different positions which registers a signal, then you
must choose another frequency that is unique to the satellite you want.
10. Use the Signal and Strength Quality bar at the bottom of the screen to judge the best position of the dish.
11. Use the
buttons to stop the motor when required.
12. When you have the best position of the dish go to the Motor Control option and using the
select store and press the OK button. The position of the satellite should now be stored.
13. If you do not store this position, it will be lost when you exit the menu.
buttons
14. Repeat the process for each satellite if required, remembering to use a different antenna alternative for
each satellite.
E44
Download from Www.Somanuals.com. All Manuals Search And Download.
Motorised System
6. Moving to a pre-set Satellite
Once you have stored the positions of the satellites you want(see left below) you can now search for the
services transmitted from them. Before you can do this, you must move the motor to the position of the
satellite you wish to search. To do this, you must access the Satellite Settings menu. Do as follows ;
1. Select Service Searching from the Main Menu and press the OK button, to display the Service
Searching menu.
2. Select the Manual Search option and press the OK button, to display the Manual Search menu.
3. Select the Antenna Alternative option and press the OK button, to display the Satellite Settings menu.
4. In the Satellite Settings menu ensure that you have DiSEqC Command Mode option set to User.
5. Highlight the option Satellite Name and use the
6. When you have selected the satellite you wish to view, go down to the Motor Control option and again
using the buttons select go to and press the OK button.
buttons to select the satellite you want to view.
7. The motor will now move to the position of the selected satellite.
8. The Movement option is used to fine-tune the position of the motor.
9. When using the Movement option for fine-tuning, you must remember to store the changes you have
made or else these will be lost.
7. Searching for services on your selected satellite
Once you have moved the motor into position, you can search for the channels transmitted from the
relevant satellite. To search for services on your new selected satellite, Do as follows ;
1. Move the motor to the position of the satellite you wish to search.
(see section 6 above)
2. Select the service searching from the Main Menu and press the
OK button. To display the Service Searching menu.
3. Select the manual search option and press the OK button to
display the Manual Search menu.
4. Now enter the Frequency and Symbol Rate using the NUMERIC
buttons(0~9).
Next enter the Polarisation and FEC values using the
5. When you have entered all these details in, press the OK button
and the search will begin.
buttons.
6. When the search has finished, press the OK button to view.
7. Repeat the process for all the transponders you want from this
satellite.
8. Automatic Search
It is possible to use automatic search using the DiSEqC 1.2 motorised system.
1. Ensure that the positions for the satellite you want to search is correct. (see Section 3 and 5 above)
2. In the Main Menu, select the option channel searching and press the OK button.
3. In the Service Searching menu, select the Antenna Alternative that you have set for this satellite.
4. When you search new services, please refer to Automatic Search of page E36.
5. When the search has finished, press the OK button to store and view the services.
Now that you have stored all the positions of the satellites and searched for all the services you want,
you can now use your receiver as normal. When you change to a service that is being transmitted from
a different satellite, you will have to wait a few seconds to allow the motor to move into position to receive
the new service.
E45
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting Guide
E46
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Map
E47
Download from Www.Somanuals.com. All Manuals Search And Download.
E48
Download from Www.Somanuals.com. All Manuals Search And Download.
Specification
Tuner & Channel
Input Connector
Frequency Range
Input Impedance
Signal Level
IF
F-type, IEC 169-24, Female
950 - 2150 MHz
75Ω unbalanced
-25 to -65dBm
480 MHz
IF Band width
LNB Power &
Polarisation
36 MHz
Vertical : +13.5V
Horizontal : +18V
Current : 500mA Max. Overload Protection
22 KHz Tone
Frequency : 22 ± 4KHz
Current Max. 50mA
Version 1.0/1.2 Compatible
QPSK
Amplitude : 0.6 ± 0.2V
0/12V DC Output
DiSEqC Control
Demodulation
Input Symbol Rate
FEC Decode
2-31 Ms/s
Convolutional Code Rate 1/2, 2/3, 3/4, 5/6 and 7/8
with Constraint Length K=7
MPEG Transport Stream A/V Decoding
Transport Stream
MPEG-2 ISO/IEC 13818
Transport stream Specification
MPEG-2 MP@ML
Profile Level
Input Rate
60 Mbit/s Max
Aspect Ratio
Video Resolution
Audio Decoding
Audio Mode
Sampling
4:3, 16:9
720 x 576
MPEG/MusiCam Layer I & II
Single channel/Dual channel/Joint stereo/Stereo
32, 44.1 and 48KHz
Memory
TMIPS R3930(81MHz)
Main Processor
Flash Memory
Graphic(MPEG) &
System DRAM
2Mbyte
4Mbyte
3Mbyte(CAS Embedded)
4Mbyte(CAS Embedded)
You can use a special antenna switch with DiSEqC commands.
When changing ASTRA1 to EUTELSAT for example, a DiSEqC command is sent with the 22KHz tone
through the antenna cable. The antenna switch will change ASTRA1 to EUTELSAT. The concept of
DiSEqC is a protective trademark of EUTELSAT.
Data rate decides the picture quality of digital TV programmes.
Data rate of about 5-6 Mbit/s coincides with the picture quality of a analog TV programme.
E49
Download from Www.Somanuals.com. All Manuals Search And Download.
A/V & Data In/Out
TV SCART
Video Output(CVBS, S-Video, RGB)
Audio Output
(Resolution : 20 bits DAC, Max. 2 Vrms)
Video Output(CVBS)
VCR SCART
Video Input(CVBS, S-Video, RGB)
Audio Output(Resolution : 20 bits DAC, Max. 2 Vrms(fixed))
RCA/Cinch, Video Output(CVBS)
VIDEO
AUDIO R/L
RCA/Cinch Volume and Mute Control
(Resolution : 20 bits DAC, Max. 2 Vrms)
Digital Audio Output, Fiber-Optic(Resolution : 20 bits)
Transfer rate 115,200 bps, 9pin D-sub Type
S/PDIF
RS-232C
RF-Modulator
RF-Connector
Frequency
75Ω, IEC 169-2, Male / Female
470 - 860 MHz
Output Channel
TV Standard
Preset Channel
CH21-69, CH28-69 or CH13-62 for the Remodulator
PAL I/G/B/D/K selectable by Menu setting
CH36(or TBD). Software changable by Menu
Power Supply
Input Voltage
Type
190 - 250V AC, 50/60 Hz
SMPS
Power Consumption
Standby Power
Protection
Max. 35W
≤ 11W
Separate internal fuse. The input shall have lightening Protection
Physical Specification
Size(W
x
H
x
D)
370
x
60
x
280 mm(Excluding the Foot)
Foot height is 8 mm
Around 2.8 kg
Weight(Net)
Operating Temp
Storage Temp
0°C to + 45°C
-10°C to + 70°C
Storage Humidity
5% ~ 95% RH(Non-Condensing)
•
Please note : The specification of the STB may be changed without notice in advance.
E50
Download from Www.Somanuals.com. All Manuals Search And Download.
HOMM.10E
Download from Www.Somanuals.com. All Manuals Search And Download.
|