Instructions
WF865
WF860
WF840
Download from Www.Somanuals.com. All Manuals Search And Download.
The following instructions and information will help you to
get the most out of your new machine...
Safety first!
This instruction manual contains important details on using your machine
safely. If you pass the machine onto someone else, make sure that you
give them this manual.
Installing your machine
Follow these steps for trouble free installation:
location, transit bolt removal, electricity, water supplies and drainage.
Moving the machine and adjusting the feet.
A typical wash programme
Washcare tips and a simple step by step guide to using your machine.
The dispenser
Guidance on getting the most out of your wash using powders, liquids, tablets and
fabric conditioners.
Programmes, options and other features
Select a programme for any wash including automatic functions,
pre-washes, economy loads, variable temperature and spin speeds.
Cleaning and maintenance
How to care for your machine by removing and cleaning the dispenser drawer and
compartments, cleaning the door bowl and machine exterior plus the recommended
Maintenance wash.
Troubleshooting
In the unlikely event that you have problems with your machine, the following
guide may help you to get your machine working correctly straight away.
After sales service and guarantee
We give you a unique ‘satisfaction guaranteed’ promise - valid for ninety days
after you have purchased your machine.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety first
This instruction manual contains important details on using your machine safely.
Please keep it safe for your future reference.
If you pass the machine onto someone else, please make sure that you give them this
manual so that the new owner can read these safety warnings.
✔
✘
● Do not plug your
machine into a socket
when your hands are
wet.
● Dispose of packaging
materials carefully and
keep them well away
from children.
●
When disposing of your
old machine, to minimise
risk of injury to children,
isolate from the electrical
supply, remove the door,
the plug and cut the mains
cable off flush with the
appliance. Dispose of
them separately to make
sure that the appliance
can no longer be plugged
into a mains socket.
● Do not connect the
washing machine to a
single outlet
instantaneous water
heater.
● Do not try to modify
this machine in any way.
● Do not connect the
washing machine
directly to an artificial
water softening unit.
Use the recommended
amount of detergent for
the water hardness in
your area.
● This washing machine is
designed for domestic
use only.
● Before using your
machine remove the
transit bolts and spacers
from the back of the
machine.
● Do not let children play
with the machine or its
controls.
Keep the parts you
remove for future
transportation.
● Do not stand on the
machine or in the door
opening.
● Any electrical work
necessary to install this
machine should be
carried out by a qualified
electrician.
● Do not lean on the door
or use the door to lift or
move the machine.
● Do not wash garments
that have previously
been treated with
solvents.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Remove the polystyrene base...
Important check when unpacking your machine:
This is part of the polystyrene base and should
have stayed intact when you remove the base.
If it has broken off and is still in the machine....
remove it, carefully lay the machine on its side
onto the polystyrene top cap and then remove
the polystyrene block.
Note: You will need a second person to help you lower and raise the machine.
Installing your machine
Follow these steps for trouble free installation:
WARNINGS:
● Do not plug
1. Choose a location...
the machine in
Where you install the machine will affect its performance.
and switch it
on at the mains
until the
installation is
completed.
●
●
●
For your safety and to comply with electrical
regulations, seek professional advice if you want to
install your machine in a bath or shower room.
Make sure that the electrical socket and water taps are
easily accessible. You should switch off the machine’s
electrical and water supplies when you are not using it.
● You will be
charged for a
service call if a
problem with
your machine
is caused by
incorrect
Make sure that you allow enough space for the
machine. Select a space at least 600mm wide, 600mm
deep and 850mm high. Also leave enough space to
open the door fully so you can load and unload it easily.
●
●
Where possible the machine should be positioned on a
solid level floor to minimise vibration.
Take care when you move the machine not to rip any
floor coverings. There are wheels on the bottom rear of
the machine, so tilting it backwards a little is the easiest
way to move it. The weight of the machine may cause
indentations in some floor coverings.
installation or
misuse.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Remove the transit fixings...
There are two transit bolts fitted under plastic covers, one at
either side of the rear of your machine. These bolts prevent
damage to the machine while it is being transported.
Remove both transit bolts complete with spacers, by
following the instructions below.
Use a screwdriver to release the covers and a standard
13mm spanner to remove both bolts.
Location of
transit bolts.
Firstly, unhook the grey
drainage hose and
3
proceed as follows, taking
care not to loosen the hot
and cold water fill hoses.
WARNINGS:
1
● Before you use
the machine,
remove the two
transit bolts
complete with
spacers.
Hold the transit bolt and
slide to the side and then
pull out.
The bolt and spacer
should be removed
intact. (see below)
If you do not
do this,
damage may
occur to your
machine.
Using a screwdriver,
remove the screw to
release the plastic cover.
Keep the parts
in case you
2
need them for
future
transportation.
Example transit bolt
complete with spacer.
4
● If and when
you replace the
bolts complete
with spacers
make sure
Use a standard 13mm
spanner to undo the bolt
until three threads can be
seen on the bolt.
(see below)
you do not
overtighten
them.
For safety, you must
replace the plastic cover
over the hole left by the
transit bolt.
(Repeat steps 1 to 4 to
remove the second
transit bolt).
6
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Connect your machine to the electricity supply
Make sure that the electrical socket is accessible. Take the
mains lead from the back of the machine and plug it into the
socket. We do not recommend wiring your machine directly
into the mains supply.
WARNINGS:
● This machine
must be
Changing the mains lead
If you have damaged the existing lead and need a new one,
contact Hotpoint Service UK on 08709 066066 or
earthed.
1850 302 200). A charge will be made. We strongly advise that
fitting the new lead is carried out by a qualified electrician.
● Do not use the
plug unless
the fuse cover
is fitted.
Changing the plug
If you need to change your plug if it does not fit your socket;
isolate the machine from the mains supply. Cut off the
supplied plug and safely dispose of the discarded plug.
Note: If you change the plug, the colour of wires in the mains
lead may not match the colour of the markings which show
the different terminals in the plug. You must wire it as shown
below.
● To avoid a
shock hazard,
when
changing a
plug, always
safely discard
the cut off
plug. Do not
insert into any
other socket.
Green and yellow
(Earth) wire this to the
terminal marked
13A ASTA
approved fuse
to BS1362.
‘E’,
symbol, or
coloured green
and yellow.
Brown (Live)
wire this to
the
Blue (Neutral)
wire this to the
terminal
marked ‘N’ or
coloured black.
terminal
marked ‘L’ or
coloured red.
● Seek
professional
advice if you
need to use an
extension
lead.
Fuses
Your machine comes fitted with a plug and a 13 amp (13A)
fuse. If you need to replace the fuse, use only those rated at 13
amp (13A) and ASTA approved to BS1362. To change the fuse,
lift the holder to vertical position and lift the fuse out. To
replace the fuse, insert the fuse and push the fuse holder down
into the locked position. Correct replacement is identified by
colour coding or the marking on the base of plug.
WARNING:
Do not use the plug unless the fuse holder is in the locked
position and the top cover firmly replaced.
We do not recommend the use of extension leads. If you need
to do so, consult a qualified electrician.
CE marking shows that this machine meets the
following EEC directives.
Low Voltage Equipment - 72/23/EEC & 93/68/EEC
Electromagnetic Compatibility - 89/336/EEC, 92/31/EEC
& 93/68/EEC.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Connect your machine to the water supply...
●
Your hot and cold water pressure should be between 3 and 150
psi (21 - 1034 kPa). Incorrect pressures could lead to flooding
.
WARNINGS:
● The
● The water supply taps should be accessible when the
machine is installed.
● Before connecting the fill hoses, check that water is
running from the water supply taps you will use for your
machine.
temperature
of your hot
water supply
should ideally
be 60°C and
no higher
than 70°C as
this could
cause
● Connect the washing machine to the water supply using
the fill hoses fitted to the machine. Do not use old hoses.
Hot and cold fill
1 Unclip both of the fill hoses from the back of the machine.
2 Connect the free end of the grey fill hose with the red
connector to the HOT water supply (see figure1).
Connect the free end of the grey fill hose with the blue
connector to the COLD water supply.
damage to
your laundry
and the
3 Turn on your water supply and check for leaks.
If there is a leak, turn off the water supply, remove the
connector and check that the sealing washer is in place.
Refit the connector and tighten it.
machine.
Turn on the water supply.
4 When moving the machine into its final position, make
sure that the hoses are not trapped or kinked.
● Do not
figure 1
figure 2
connect the
machine to a
single outlet
instantaneous
water heater.
If the fill hoses are too short:
Longer fill hoses are available from our Genuine Parts and
Accessories Mail Order Hotline UK on 08709 077 077 or
on (01) 842 6836).
Remove the existing fill hoses from the inlet valves on the
back of the machine and fit the new longer fill hoses as
shown above with the angled ends of the hoses
connected to the machine (see figure 2).
cold water supply
figure 3
If you have no hot water supply or your hot water
pressure is low:
A cold fill adaptor (figure 3) and fitting instructions are
available from your local Hotpoint authorised Service
Centre or by calling the Genuine Parts and Accessories
Mail Order Hotline UK on 08709 077 077 or
(or in the Republic of Ireland on (01) 842 6836).
8
Download from Www.Somanuals.com. All Manuals Search And Download.
5.Connect the machine to a drainage system...
●
●
●
Take care when you remove the drain hose from the clips on
the back of the machine. All machines are tested with water
before they leave the factory so a small amount of water may
still be in the hose.
Do not remove the hooked end support from the GREY
drainage hose when using any of the drainage methods
detailed below. You may need to reposition it as required along
the drainage hose.
For drainage into a standard work top sink, ensure the outlet
pipe has a minimum diameter of 32mm. If your sink is inset,
the front edge of the basin must be less than 75mm from the
front edge of your worktop, so that the drain hose will hook
securely into the sink. Unclip the drainage hose from the back
of the machine and hook over into the sink. Make sure that the
sink is free of any obstructions and that the sink plug can not
fall into the sink, preventing the water from draining away
freely. Pumped out water may be very hot.
WARNINGS:
● Take care
when using
the sink
drainage
system. The
discharge
water may be
very hot.
● Do not
position the
standpipe
near an
We recommend one of the following drainage
methods:
figure 1
electrical
socket.
Standpipe
1 Make sure that the standpipe has a
minimum diameter of 38mm.
2 Remove the drainage hose from the
clips on the back of the machine.
3 Make sure that the top of the
standpipe is positioned at least
500mm from the floor (see figure1).
Use the plumbing indicator line label
on the back of the machine as a
guide.
● Flooding
could occur
if any part
of the
500 mm
installation is
not carried
out correctly.
4 Place the drainage hose
approximately 100mm into the
standpipe.
● Remember
you will be
charged for a
service call
for problems
caused by
Hooked end support
figure 2
Under sink waste system
1 Cut out the membrane, bung or
blanking plug (see figure 2).
2 Unclip the drainage hose from the
back of the machine.
3 Move the hooked end support along
the drainage hose as required.
4 Attach the drainage hose securely to
the under sink drainage unit, using a
hose clip (see figure 3).
5 Raise the hooked end support up to
at least 800mm to avoid water being
drawn back into the machine.
incorrect
Cut off end
installation,
non-removal
of transit
figure 3
bolts or
packaging,
leaks from
household
pipework,
loose or
blocked fill
and drain
hoses.
Hose clip
If the GREY drainage hose is too short
A longer drainage hose is available from our Genuine Parts
& Accessories Mail Order Hotline
9
(or in the Republic of Ireland on (01) 842 6836).
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Move the machine into position...
Your machine is heavy so care must be taken when moving
it.
WARNING:
● Do not drag
or lift the
●
●
Please take care not to damage any floor coverings
when moving the machine.
machine by
it’s door.
When moving the machine, take care not to kink or
damage the hoses at the back of machine.
7. Adjust the feet...
Once the machine is in place
Your machine may become noisy or move about if it is not level.
If necessary, to level the machine adjust the two front feet, as
follows:
● When your machine is in its intended
location, make sure that it is level by
turning one or both of the front feet
clockwise until the machine stands
firm and level.
The maximum slope of the table top
must not exceed 2˚.
● The spring on each foot will stop them coming loose.
● Switch the machine on at the plug socket.
Now that you have successfully
installed your new machine, we
advise that you run it through a
95˚ White Cotton programme
without any laundry and without
any detergent in it.
This will check your installation,
connections and drainage, and
will thoroughly clean the interior
before you carry out an actual
wash programme on your laundry.
NOTE: This will take approximately 2
hours to complete.
TECHNICAL DETAILS
Models
WF865, WF860, WF840
59.5cm wide
Dimensions
Capacity
85cm high
60cm deep
from 1 to 6kg
Electric
voltage 220/230 Volts 50Hz
Connections
maximum absorbed power 1700W
Spin Speed
up to 1600rpm - WF865 & WF860
up to 1400rpm - WF840
Control
Cotton wash
temperature 60˚C
run with a 6kg load
Continue reading this book to get
to know the various features of
the machine.
programmes
according to
IEC456
directive
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your machine
The rest of this instruction book will help you to make the most of your new washing
machine. We have created the machine for the way you live, by listening to people just
like you who use our products. You will find that your new machine has many useful
features and is easy to use.
Washcare tips...
● Your machine can wash a maximum load of 6kg (cotton).
● Do not overload the machine (maximum load 6kg).
In addition to reducing the quality of the wash, this may
also damage your laundry and the machine.
Weight of
Wash Load
Two examples
● We strongly recommend that you do not wash underwired
of maximum
bras in this machine. Should the wires become detached it
wash loads for
could cause damage to your clothes and the machine. If the
different types
washcare label states that the bra is machine washable, then
of fabric.
we advise placing it in a sealed pillow case or a similar
COTTON
2 Bath Towels
1 Hand Towel
6 Shirts
6 Blouses
1 pair of
Pyjamas
washbag.
● Do not use the machine if the item to be washed does not
have a wash label.
Before washing laundry we recommend that you do the
following:
4 items of
Underwear
● Pre-treat awkward stains with washable treatments.
Do not wash any items that have previously been treated
with solvents.
= 6kg
SYNTHETIC
2 Children’s
Dresses
4 Shirts
4 Blouses
1 pair of
Pyjamas
4 items of
Underwear
● Close zips, fasten belts, tie strings and close press studs to
prevent tangling.
● Empty all objects from pockets as they may damage
clothes and the machine.
● Limit the size of absorbent loads, for example towels to 3kg
= 3kg
(7lb) to give good washing and rinsing results.
● Place small items in a wash bag.
● Always follow the care label on items when choosing a wash
programme.
● Wash non-colourfast items or really dirty clothes
separately as they may affect other items.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
A typical wash programme
Sort your laundry into groups by washcare labels.
1
Load the machine, making sure that clothes are not trapped
in the door. Close the washing machine door by pushing it
until it clicks.
WARNINGS:
● Do not allow
children to
Add detergent and fabric
conditioner, if required, to the
dispenser drawer.
Refer to the detergent
manufacturer’s dosage
instructions.
2
play with the
machine or
tamper with
the controls.
This machine
has a Child
Lock feature,
which when
activated
3
4
Switch the machine on by pressing
‘ON/OFF Pause’.
‘On’ will illuminate in the display
window.
disables all
controls (see
‘Options’).
Select the programme you require.
You will hear a bleep and the
programme temperature will
illuminate in the display window
followed by the spin speed. After 4
seconds the programme length,
‘Time to End’, will be displayed.
● Do not
overload the
machine! It
may damage
laundry and
reduce the
quality of
Select any optional wash feature(s)
that you may require by pressing
the appropriate button(s),
indicator lights will show what you
have chosen.
the wash.
5
6
● Do not try to
open the door
during the
wash
Press ‘START/CANCEL’ to begin the
wash programme. During the
wash, the programme status lights
will glow to indicate at what stage
in the cycle the programme has
reached.
The ‘Time to End’ displayed will
count down the programme time
to the end of the programme.
programme.
● Do not open
the dispenser
drawer
during any
programme.
● In the unlikely
event of
At the end of the wash programme ‘End’ will illuminate in
the display window. Also a ‘Keyhole’ will glow indicating the
door is locked. The machine will bleep and the light will go
out when the door can be opened.
7
8
something
not working
see the
Trouble-
shooting
section.
Switch the machine off by pressing
the ‘ON/OFF Pause’ button.
We also recommend that you
switch off the electricity and water
supply.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
The dispenser
If you wish to use liquid detergent:
We recommend the use of a detergent ball as provided by your detergent manufacturer.
Drawer release latch
Prewash detergent
Main detergent
compartment.
Maximum 400ml
powder or
200ml liquid.
compartment.
Maximum 200ml
powder or 100ml
liquid.
Grate
Fabric conditioner
compartment.
120ml maximum
Outlet pipe
Fabric conditioner exit channel
(viewed from the rear of the
dispenser drawer).
Choose a suitable detergent
● Follow the detergent manufacturer’s recommendations to make sure you
use the correct amount for your wash.
● To achieve the best wash results, the water hardness, degree of soiling and load
size need to be considered and the recommended amount of detergent used.
● Choose ‘lowsuds’ automatic powder, liquid or tablets, designed specifically for
automatic washing machines. Do not use handwash detergent, even on the
handwash programme as excessive suds will occur.
● Do not use too much detergent or exceed the maximum level indicators.
● Do not use too little detergent, you will not achieve a clean wash. Follow the
detergent manufacturer’s recommendations.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Dispensing powder detergent
To achieve the best wash results the
manufacturer’s recommended amount
of detergent should be measured and
added to the main detergent compart-
ment (II symbol) (max. 400ml).
WARNING:
● Do not put any
item(s) into
the drawer
other than
detergents
that are
Dispensing liquid detergent
designed to be
released from
the drawer as
they may cause
damage or
We recommend the use of a detergent dosing ball, as provided by your
detergent manufacturer.
Dispensing tablets
Most tablets are dispensed via the machine drum using a net,
or similar device, which is placed on top of the washload
towards the back of the drum. However, some tablets are
designed to be placed in the dispenser drawer. Check the
pack for details.
blockage.
Adding fabric
conditioner
Using in-drum
dosing
Pre-wash
When you are using
the pre-wash option
with your selected
programme add
detergent to the
pre-wash
compartment
(l symbol).
Add the detergent
for the main wash
to the main
Dosing devices -
balls, nets etc can
be used.
Pour the
recommended
dosage of fabric
conditioner into
the compartment
(flower symbol).
Do not exceed the
maximum fill line.
Place upright, on
top of the wash
load and towards
the back of the
machine.
DO NOT use with
the pre-wash
option.
compartment
(ll symbol).
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Wash programmes
Progress indicators
Programme selection buttons
‘ON/OFF Pause’ button
‘START/CANCEL’ button
On-Off / Selecting a wash programme
Switch the machine ‘On’ by pressing the ‘ON/OFF Pause’
button.
To begin the selected programme press ‘START/CANCEL’. I n
order to switch the machine off at the end of the wash
programme press the ‘ON/OFF Pause’ button.
WARNINGS:
● Do not try to
open the
door during
the wash
programme.
To change a programme
Press the ‘START/CANCEL’ button once. The machine will
bleep and enter a 2 minute pump out programme.
‘0:02’ will be displayed in the window. Pressing the
‘START/CANCEL’ button again will cancel the programme
totally and ‘On’ will appear in the display window. A different
programme can now be selected by pressing the required
programme button. You might need to add detergent and
fabric conditioner. Press the ‘START/CANCEL’ button to begin
the new programme.
● Do not allow
children to
play with the
machine or
tamper with
the controls.
● If you cancel a
programme
part way
The progress status lights
This set of lights indicate what stage in the wash cycle
the selected programme has reached.
Each light will appear in sequence as each stage of the
programme is reached.
through a
wash or there
is a power
cut, take care
when
Door Locked Indicator...‘Keyhole’ symbol
The ‘Keyhole’ symbol will illuminate 2 seconds after you have
pressed the ‘START/CANCEL’ button and will remain lit
throughout the wash programme.
The ‘Keyhole’ symbol will be flashing at the end of the
programme to indicate that the door is still locked. When the
symbol goes off you will hear a bleep and the door can then
be opened.
opening the
door. The
machine may
contain hot
water.
● This machine
has a Child
Door not closed
If a flashing ‘Door’ message appears in the display window,
the door has not been closed properly and the programme
will not start. Ensure that the door is closed properly by
pushing it until you hear the catch click.
Lock feature,
which when
activated
disables all
controls (see
‘Options’).
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Wash programmes
To select a programme to suit your individual requirements use the following series of
tables, explaining the wash programme buttons and programme details.
The programmes have been listed by Fabric Type.
The programme times ‘Time to End’...
For each wash programme and option(s) selected the machine automatically
calculates the estimated programme length ‘Time to End’. This is displayed in hours
and minutes shortly after the wash programme temperature has been displayed.
The ‘Time to End’ will then remain lit throughout the wash programme and counts
down to the end of the programme.
Note: These estimated programme times are dependant on the temperature and
pressure of the incoming water supply, the option(s) selected and the load being
washed. They may, therefore change during the fill stages of each programme to take
into account the extra heating or filling time required.
To review the current wash programme during the wash cycle...
This feature allows you to check the running wash programme:
●
To view the temperature of the selected programme - Press the ‘Variable
Temperature’ button once.
●
To view the spin speed of the selected programme - Press the ‘Variable
Spin Speed’ button once.
After a few seconds the display window will return to the ‘Time to End’ showing the
remaining programme length.
If you decide the selected programme does not suit your requirements you can
change the programme, see previous page ‘To change a programme’.
Fabric type - Cotton
Wash
Temp
˚C
Display
Window
shows
Maximum
dry weight
load
Spin speed
(rpm)
Wash Press
Label Button
Fabric
WF865 - 1600
WF860 - 1600
WF840 - 1400
Non-colourfast cotton,
linen or viscose
6kg
6kg
6kg
Once
40
60
95
Colourfast cotton
linen or viscose without
special finishes
WF865 - 1600
WF860 - 1600
WF840 - 1400
Twice
WF865 - 1600
WF860 - 1600
WF840 - 1400
Three
times
White cotton and linen
without special finishes
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Wash programmes
Fabric type - Acrylics and Synthetics
Display
Wash
Temp
˚C
Maximum
Window
dry weight Spin speed
Wash Press
shows
Fabric
load
(rpm)
Label Button
Acrylics
Acrylics and tri-acetate blends
of these fabrics with wool,
polyester and wool blends
Once
Twice
40
50
3kg
800
Synthetics
Coloured nylon, polyester,
acrylic and cotton mixtures,
cotton or viscose with special
finishes, coloured polyester
and cotton mixtures.
3kg
800
Fabric type - Hand Wash Wool
Wash
Temp
˚C
Display
Spin
speed
(rpm)
Maximum
dry weight
load
Wash Press
Label Button
Window
shows
Fabric
Shrink resistant hand
washable wool, woollen
blankets.
600
600
40
40
1.5kg
2.5kg
Once
Wool mixtures with cotton or
rayon.
Fabric type - Silks and Hand Wash
Maximum
dry weight
load
Display
Wash
Temp
˚C
Spin
speed
(rpm)
Wash
Label
Press
Button
Window
shows
Fabric
Silk
400
Once
Twice
3kg
4kg
30
Printed acetate
Handwash
A cool gentle action wash.
800
25
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Wash programmes
Fabric type - Super Wash Cottons
Maximum
dry weight
load
Display
Window
shows
Wash
Temp
˚C
Spin
speed
(rpm)
Wash
Label
Press
Button
Fabric
WF865 - 1600
WF860 - 1600
WF840 - 1400
An intensive wash programme
to get your whites even whiter.
Once
60
6kg
Fabric type - Cottons, Fast Wash
Maximum
dry weight
load
Display
Wash
Temp
˚C
Spin
speed
(rpm)
Wash
Label
Press
Button
Window
shows
Fabric
For freshening up lightly
soiled items.
Warning: not for woollen, silk
or delicate items.
WF865 - 1600
WF860 - 1600
WF840 - 1400
Once
Twice
5kg
3kg
60
For freshening up lightly
soiled items.
Warning: not for woollen, silk
or delicate items.
800
30
Fabric type - Cottons and Delicates, Rinse and Spin programmes
Display
Window
shows
Maximum
dry weight
load
Spin
speed
(rpm)
Press
Button
Fabric
Rinse and Spin Fast
Cottons
WF865 - 1600
WF860 - 1600
6kg
6kg
Once
Twice
Rinse and Spin Fast
Cottons
WF840 - 1400
800
Rinse and Spin Slow
Delicates
3kg
Fast Spin
Cottons
WF865 - 1600
WF860 - 1600
6kg
6kg
Three
times
Fast Spin
Cottons
WF840 - 1400
800
Slow Spin
Delicates
Four
times
3kg
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Options
Time Delay button
Stored button
Child Lock button
Choosing an option button
The features listed below are all available with any wash programme selected.
Stored Programme
●
This option allows you to store your favourite programme for when you
next want to use it. Only one programme can be stored in this function.
To store a programme: Load your machine and add detergents. Select your
desired programme and any options you require. Press the ‘START/CANCEL’
button, the programme will start. Press the ‘STORED’ button twice and the
programme will be stored for future use. ‘Saving favourite’ in the display
window will remain steady in the display for 2 seconds after it has been saved.
To retrieve and use a stored programme: Press the ‘STORED’ button, your
favourite programme will appear on the display. Press the ‘START/CANCEL’
button to start the programme.
To change a stored programme: Load your machine and add detergents.
Press the ‘STORED’ button, your favourite programme will appear on the
display. Select the programme and options to suit your new requirements.
Press the ‘START/CANCEL’ button and the programme will start. Press the
‘STORED’ button again and the programme will be changed to your new
settings.‘Saving favourite’ in the display window will remain steady in the
display for 2 seconds after it has been saved.
Child Lock
When activated all the buttons will be disabled and a child will not be
●
able to alter any wash programme or option settings. Once selected
this feature remains activated, even when the machine is ‘off’.
To use this feature press the ‘Child Lock’ button. The child lock icon will light
and the feature is activated. If any of the control buttons are pressed, the
child lock icon will flash and the machine will bleep 3 times: no alterations to
the control settings will be allowed. If power is interrupted, at any time,
pressing any button will reactivate the child lock feature.
To deactivate this feature hold the ‘Child Lock’ button down for 2
seconds. You will then hear a bleep and the child lock icon will go out.
Time Delay
This feature allows you to delay the start of any wash programme
●
selected. The programme start can be delayed for a maximum of 24
hours.
To use this feature select the wash programme and any options you require
and then press the ‘Time Delay’ button once. The display window will
indicate ‘1hr’. Repeated pressing of the ‘Time Delay’ button will increase the
delayed start time in 1 hour increments up to 24 hours maximum and will
scroll back to ‘Off’. Once you have selected the appropriate time delay
press the ‘START/CANCEL’ button. The display window will show the set time
delay. The words ‘Time Delay’ will continually flash in the display window and
the time will count down in hours until the end of the Time Delay. Then the
‘Time to End’ will be displayed and the programme will start.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Options
How Dirty
Pre Wash
Reduce Creases
Mini Load
Any of the following optional wash features can be selected after the wash programme
selection.
To choose an optional wash feature, press the option button once or in some cases scroll
through the options given in the display window.
Note: If the option selected is not available with the programme you have selected,
an audible beep will sound briefly.
How Dirty
●
This option allows the washing machine to take into account how dirty the
washing is. You can select ‘Light’, ‘Normal’ or‘Super’ load soil level and the
selected wash programme is modified accordingly.
This option is set automatically to ‘Normal’ soiling which will be displayed adjacent to
the ‘How Dirty’ button. Repeated pressing of the ‘How Dirty’ button allows you to
scroll through the ‘Normal’,‘Super’ and ‘Light’ soiling settings.
This is not available with the Rinse and Spin programmes.
Also ‘Super’ soiling cannot be selected for the Wool, Silk, Fast Wash and
Handwash programmes.
Pre Wash
This option provides a short wash cycle, at 30˚, before the selected wash
●
programme starts. It is used to loosen the heavy soil deposits on clothes.
It is recommended that detergent is also used in the Prewash compartment.
To use this option press the ‘Pre-Wash’ option button once and illuminates in the
display window above the ‘Pre-Wash’ option button.
Press again to cancel the option.
This option is not available with the Super Wash, Wool, Handwash, Fast Wash
and the Rinse and Spin programmes.
Mini Load
Select this option for washing a smaller load.
●
In addition to reducing actual washing time, this option will reduce the water
and energy consumption by up to 50%.
To use this option, press the ‘Mini Load’ option button once and illuminates in the
display window above the ‘Mini Load’ option button.
Press again to cancel the option.
Note:You can reduce the amount of detergent you use with this wash.
This option is not available with Super Wash, Delicates, Wool, Silk or Handwash
programmes.
Reduce Creases
This option reduces the wash action and spin speed for delicate clothes.
●
To use this option press the ‘Reduce Creases’ option button once and illuminates in
the display window above the ‘Reduce Creases’ option button.
Press again to cancel the option.
This option is not available with Super Wash, 95˚ Cotton, 30˚ Fast Wash, Wool,
Silk, Handwash and Spin only programmes.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Options
Time Saver
Rinse Hold
Rinse Hold
●
This option holds clothes in the final rinse water, keeping them fresh
until you are ready to complete the programme
To use this option press the ‘Rinse Hold’ button once, illuminates in the
display window above the ‘Rinse Hold’ option button. Complete the final spin
by pressing the ‘Rinse Hold’ button again when the symbol is flashing.
This option is not available with Wool, Fast Wash and the Spin only
programmes.
Time Saver
This option can be used to reduce the time of a wash programme.
●
To use this option press the ‘Time Saver’ option button once before the wash
programme is started, the chevron progress lights will illuminate.
This option is not available with Wool, Silk, Hand Wash, Fast Wash, Super
Wash and Rinse and Spin programmes.
Automatic Features
Auto half load
Auto half load saves you time and money when washing smaller loads. Water levels
are automatically adjusted to cater for the different loads.
Unbalanced load warning
Your machine has an inbuilt feature to prevent it spinning with an unbalanced load.
This will minimise excessive vibration and prolong the life of the machine.
Before each spin the machine ‘senses’ the load within the drum and if the machine
considers the load to be unbalanced, it will not automatically spin. Instead the
machine will try to redistribute the load to achieve balance by tumbling backwards
and forwards. If it is unable to balance the load after the sixth attempt the machine
will abort the spin process.
If this safety feature is encountered you can spin the load, after first opening the door,
redistributing the load and reselecting a fast or slow spin programme. In the case of
small loads or single items you may try adding some extra items of a comparable size
to help balance the load.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Options
Variable Spin button
Extra Rinse button
Variable Temperature button
The following options can be selected to alter the nature of the chosen wash
programme by changing the spin speed, number of rinses or the programme
temperature. To choose a control option press the option button and scroll through
the option menu’s, following the display window prompts. If the options is not
available with a particular wash programme the machine will bleep 3 times.
Variable Spin
●
This control option can only be used to reduce the spin speed of the
selected programme. The maximum spin speed for the selected
programme will be illuminated in the display window then the ‘Spin’ button
is pressed and you will hear a bleep. By pressing the ‘Spin’ button again, you
will hear another bleep and the spin speed will have been reduced by
100rpm. The spin speed can be reduced to a minimum of 400rpm or
alternatively you can choose to have no spin by selecting ‘off’ in the display
window or you can scroll back to the original spin speed by repeatedly
pressing the ‘Spin’ button.
This option is available with all wash programmes, including the Rinse
and Spin only programmes.
Extra Rinse
●
This control option can be used to add a rinse for people with sensitive
skin.
A rinse can be added to a wash programme by pressing the ‘Rinse’ button
once, you will hear a bleep and see ‘Extra Rinse’ illuminated in the display
window adjacent to the ‘Rinse’ button.
The ‘Extra Rinse’ option is not available with the Wool, Silk or handwash
programmes.
Press the ‘Rinse’ button again to cancel the ‘Extra Rinse’ option and no lights
will be illuminated.
Variable Temperature
This control option can only be used to reduce the temperature of the
●
selected wash programme. When the ‘Temp’ button is pressed the
maximum temperature for the selected programme will be illuminated in
the display window and you will hear a bleep. By pressing the ‘Temp’
button again, you will hear another bleep and the temperature will have
been reduced by 5˚C. The temperature can be reduced to a minimum of
25˚C or alternatively you can choose to have no heating by selecting ‘off’
in the display window or you can scroll back to the original temperature by
repeatedly pressing the ‘Temp’ button.
Note: This does not effect the incoming water supply temperature, only the
target machine wash temperature.
This option is not available with the Wool or Rinse and Spin programmes.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and maintenance
Removing and cleaning the
dispenser drawer and
compartments
Cleaning the
outside
Use a damp cloth
to clean the
outside surfaces
of the machine.
WARNINGS:
● Do not clean
any part of
Note: You should clean the dispenser
drawer regularly.
your machine
with abrasive
cleaners,
Pull the dispenser drawer out until it
reaches its stop.
Cleaning the
door bowl
Clean the inside
surface of the
door bowl
regularly with a
soft cloth.
1
Press the drawer
2
scouring
release latch down
to remove the
agents, acids,
chlorine based
bleach or
dispenser drawer.
metal polish
as they may
cause damage.
Clean and dry the dispenser drawer,
3
syphons, grate and fabric
conditioner exit channel.
Regularly clean the outlet pipe area.
● Do not try
to clean any
part of the
dispenser
outlet pipe area
drawer while
the machine is
working.
Harsh abrasive
cleaners should
not be used as
they can scratch
the surface.
fabric conditioner
exit channel
Replace the dispenser drawer in
position and push it firmly back into
place.
4
A build-up of
soiling and water
hardness residue
may result in
water leaking
from the door.
Maintenance wash
Using too little detergent can cause a build up of grease, dirt
and hard water salts, which, over time may damage your
machine, your clothes and could cause the machine to smell.
We recommend you carry out a maintenance wash two or
three times a year to keep the machine and the outlet pipes
clean and free from a build up of these deposits.
Simply run a 95˚ White Cotton programme without laundry,
using the usual amount of biological detergent for normal
soiling.
NOTE: This will take approximately 2 hours to complete.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting...
In the unlikely event that you have problems with your machine, the following guide
may help you to get your machine working correctly straight away. ..
The machine will not start...
The door will not open...
● Close the door. Check that the machine
has power. Choose a programme and
press the ‘START/CANCEL’ button. Check
to see if a ‘Keyhole’ symbol is flashing in
the display window, if so, see below.
If it is not, check to see:
● Has the programme finished? Is ‘End’ lit
in the display window and the ‘Keyhole’
symbol deactivated?
The door will not open until the ‘Keyhole’
symbol goes out shortly after the
programme has finished.
i) If ‘Time Delay’ has been selected.
ii) The machine is plugged in and is
switched ‘On’.
iii) If the socket is OK. Try another
appliance in the socket to check.
iv) If the fuse in the machine plug is OK.
If not, replace it, see ‘Connect your
machine to the electrical supply’
(see section: INSTALLING YOUR
MACHINE).
● There is still water in the machine.
Go through all the points in the next
section,‘The machine will not pump out
water...’
The machine will not pump out the
water...
● Make sure that there is no blockage in
the drain hose and that it is not kinked.
● Is the drain hose installed correctly?
v) If ‘Child Lock’ is activated (see below). ● If you have connected your machine to a
sink waste system, make sure that you
‘Door’ is flashing in the display window...
● Shut the door firmly, until it clicks.
The symbol should now go out.
have cut out the membrane from the
under sink drainage system.
(see section: INSTALLING YOUR
MACHINE).
A ‘Tap’ symbol is flashing...
● Ensure that the drainage system,
standpipe or under sink connection is
free from any blockage.
● This means that the machine cannot fill.
Check that the water supply is turned on
and that the inlet hoses are not kinked.
- If any of the above are found to be
the cause of your problem you will need
to run the machine through a spin only
programme.
The machine bleeps 3 times upon
pressing a button...
● Check:
● If you have chosen ‘Rinse Hold’, the light
will flash until you press the ‘Rinse Hold’
button to continue the programme.
i) If the ‘Child Lock’ is activated (see
below).
ii) Is a wash programme currently
running and the programme can not The machine is leaking...
be changed?
● Check the fill hoses have been tightened
iii) The option is not available with the
selected wash programme.
at both ends? If not, tighten them.
● Are the fill hoses tightly fitted yet still
leaking? If so, replace the rubber
washers.
A ‘Child Lock’ symbol is lit...
● This means that the machine has been
child locked. Deactivate this feature by
pressing and holding in the ‘Child Lock’
button for 2 seconds. You will hear a
beep and the ‘Child lock’ symbol will
go out, allowing you to use the machine
normally.
● Is the standpipe or household drain
blocked? You will need to call a plumber
if you cannot clear the blockage.
The clothes are hot at the end of the
programme...
● Check that the hoses are fitted correctly:
Fill hose with RED connector to HOT
Fill hose with BLUE connector to COLD
continued...
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting...
I cannot read the information in the
display window...
The dispenser drawer will not close
properly...
● If the display window is not showing the
correct information, switch the machine
Off at the electric socket, wait 5 seconds
and switch back on.
● Please check that the drawer is properly
aligned.
● Is the drawer clogged with detergent?
(see: CLEANING & MAINTENANCE).
The ‘Time to End’ display jumps...
● The estimated programme times are
dependant on the temperature and
pressure of the incoming water supply,
the option(s) selected and the load being
washed. They may, therefore change
Steam is coming from the dispenser
drawer...
● We have designed the machine to release
steam from the dispenser drawer during
hot washes, so don’t worry.
during the fill stages of each programme Suds are coming from the dispenser
to take into account the extra heating or
fill time required.
drawer...
● Have you used the correct low suds
automatic detergent?
The programme takes a long time...
● Some programmes do take a long time.
Things which can lengthen the
programme time include low
See ‘The Dispenser’ - Choose a suitable
detergent.
● If you have used the wrong type of
detergent, flush out your machine by
choosing a rinse programme.
temperature and low pressure of the
incoming hot water supply, or low cold
water pressure.
Not all of the detergent has been flushed
away...
The machine makes a noise or vibrates
during a spin programme...
If the noise is very loud you should check
whether:
i) You have removed the transit bolts.
ii) You have removed the polystyrene base.
iii)You have correctly adjusted the front feet
to stabilize the machine.
iv)You have removed loose items such as
coins from pockets, as these can rattle
about inside the machine drum and
cause damage.
● Check that your water supply taps are
turned on fully.
● Check the inlet hoses are not kinked.
● Is your hot water pressure low? If so
you may need a cold fill adaptor to run
your machine as cold fill only.
Remember, you will be charged for a service
call for problems caused by incorrect
installation, non-removal of transit bolts or
packaging, leaks from household pipework,
loose or blocked fill and drain hoses.
Washing items which do not have a wash
label or washing items that are not intended
as machine washable and not emptying
contents from pockets may cause pump or
drain blockages or may damage components
of the machine.
The laundry has not spun dry...
● Did you use a short spin programme?
If so, try again using a faster spin
programme.
● Did you reduce the spin speed of the
selected programme using the ‘Spin’
option control button?
If so, select a faster spin programme.
If the machine is still not working contact
Hotpoint Service, see the back page.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Hotpoint guarantee
“Satisfaction guaranteed or your money back”
We give you a unique ‘satisfaction guaranteed’ promise - valid for 90 days - after
you have purchased your Hotpoint product. If there is a technical problem simply
where necessary, we will arrange for an engineer to call. If the technical problem
is not resolved under this guarantee, we will replace your machine or, if you
prefer, give you your money back.
All Hotpoint appliances carry a fully inclusive 12 month parts and labour
guarantee as well as free replacement parts for the first 5 years (except
microwaves, selected integrated appliances and cooker hoods, which have a one
year guarantee) provided that they are fitted by a Hotpoint engineer.
Guarantee terms and conditions
Your guarantee is only applicable in the United Kingdom or Republic of
Ireland and is subject to the following provisions that your appliance:
● Has been installed and used correctly in accordance with this instruction
booklet.
● Has been used solely for domestic purposes and is located on domestic
premises (ie. not for commercial or trade use).
● Has been properly connected to a suitable electrical supply voltage as stated
on the appliance rating plate.
● Has not been subject to misuse, accident, modified or repaired by anyone other
than one of our own service engineers.
For pre purchase information on any other Hotpoint product call: 08701 50 60 70
Recycling & Disposal Information
As part of Hotpoint’s continued commitment to helping the environment, Hotpoint reserves the right to use
quality recycled components to keep down customer costs and minimise material wastage.
Please dispose of packaging and old appliances carefully. To minimise risk of injury to children, remove the
door, plug and cut mains cable off flush with the appliance. Dispose of these parts separately to ensure that
the appliance can no longer be plugged into a mains socket.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
After sales service
“No company is better positioned to offer an after sales service on a Hotpoint
appliance than us - the manufacturer”
As part of our commitment to you, all Hotpoint appliances have the added benefit of a fully
inclusive parts and labour guarantee for the first 12 months. In addition to this you also
have the advantage of free replacement parts for the first 5 years when fitted by a
Hotpoint engineer. When the 12 months parts and labour guarantee expires we offer the
following after sales service options:
Repair Service and Information Help Desk
UK: 08709 066066
Republic of Ireland: 1850 302 200
Note: Our operators will require the Model number and the Serial number of your machine,
see page 2 for the location of these numbers.
Available 364 days a year with a fast, effective and value for money service.
We have the largest white goods repair service in the UK with over 1100 of our own fully
trained engineers. All repairs include a parts and labour guarantee for 12 months from the
date of the repair.
If you require any information or have any questions about your appliance, our operators
are on hand with help and advice.
All this ensures that you will receive the best available after sales service possible.
Extended Warranties
UK: 08709 088 088
Republic of Ireland: 1850 502 200
Whether you have just one or a number of Hotpoint appliances in your kitchen, we offer
two service cover plans to give you total peace of mind.
● Repair Protection Plan - FREE service repairs for a single Hotpoint appliance during
the period of cover.
● Kitchen Cover
- FREE service repairs for all your Hotpoint appliances less than
8 years old.
Genuine Parts and Accessories
UK: 08709 077 077
Republic of Ireland: (01) 842 6836
A wide range of genuine parts and accessories are available from our hotline or through
our web site.
Genuine parts and accessories, extended warranties and service repairs are all
available on our web-site at:
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Key contacts
After Sales Service
Over 1100 trained specialists, directly employed by us, ensure that you can have
complete confidence in both the appliances and services we offer.
Repair Service and Information Help Desk
UK: 08709 066 066
Monday to Friday, 8am to 7.30pm
Saturday, 8.30am to 5.30pm
Sunday, 9.30am to 3.30pm
Republic of Ireland: 1850 302 200
Note: Our operators will require the following information:
Model number
Serial number
Extended Warranties
UK: 08709 088 088
Monday to Sunday, 8am to 8pm
Republic of Ireland: 1850 502 200
Genuine Parts and Accessories
UK: 08709 077 077
Monday to Friday, 8.30am to 5pm
Saturday, 8.30am to 12noon
Republic of Ireland: (01) 842 6836
Indesit Company UK Limited, Morley Way, Peterborough, PE2 9JB
PRINTED BY SIMLEX, FOUR ASHES, WOLVERHAMPTON
01/2005 - 195042068.03
Download from Www.Somanuals.com. All Manuals Search And Download.
|