INSTRUCTIONS FOR INSTALLATION & USE
WD63, WD64
Hotpoint recommends, for your own safety and to ensure you get the best possible results from your Washer
Dryer, you read through this booklet and follow these steps thoroughly.
Electrical Guide
Installation Guide
STEP 1
STEP 2
STEP 4
STEP 6
STEP 8
Choose a location for your washer dryer,
where possible on a solid floor, with the
electrical sockets and water supply taps
easily accessible.
Dispose of packaging material in a safe
place and remove any labels.
Please read through thoroughly to
ensure you understand each stage
before you begin.
Allow sufficient space: 600mm width,
600m depth and 900mm height.
DO NOT install in a bath or shower
room.
Remember you may be charged for a service call if a
problem with your washer dryer is caused by
incorrect installation or misuse.
WARNING: This appliance must be earthed.
Dispenser Drawer
Wash Guide
STEP 3
Read through this section to familiarise
yourself with the different
compartments within the dispenser
drawer.
A wash chart is provided to help you to
select your required programme.
Examples given for the maximum
washing load weight for different fabric
types.
Hotpoint recommend the Persil range of
detergent products.
NOTE: Always follow manufacturer’s dosage
recommendations.
Options Guide
Drying Guide
STEP 5
All available optional wash features are
explained within this section - These
allow you to adjust your selected wash
programme to suit your needs.
A guide to drying times is provided for
independent drying programmes, along
with a list of items not suitable for
tumble drying.
Examples given for the maximum drying
load weight for different fabric types.
NOTE: Always make sure the mains button is in the
OFF position before selecting an independent
drying programme.
NOTE: In addition to the temperature of the
incoming water, the selection of optional wash
features will affect the programme times.
Wash & Auto Dry Programme
Troubleshooting
STEP 7
Please refer to the Troubleshooting
section if you have any problems when
using your washer dryer.
A picture guide provides a clear
explanation how to set a wash and auto
dry programme.
DO NOT overload the washer dryer.
READ BEFORE
CONTACTING
SERVICE!
There may be nothing wrong!
NOTE: Hotpoint recommend, on completion of
your programme, that you switch off both the
electricity and water supply to the appliance.
Read the rest of these instructions to get the best from your appliance, remember to fill in your guarantee registration.
Keep these instructions in a safe place for quick reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
3
2
CONNECT TO TH
REMOVE TRANSIT BRACKETS...
PLEASE USE THE NEW HOSES
SUPPLIED, FITTED TO THE
MACHINE.
YOU
IMPORTANT:
Internal transit brackets
are fitted to prevent
damage during transit
and MUST be removed
before use...
From the rear of the
machine, grip sides of
the worktop lid, lift, slide
Remove and
retain 3 screws
from the back of
the worktop lid
Remove 3 screws
and front transit
bracket - retain.
Remove 4 screws
and the rear transit
bracket - retain.
and pull towards you.
Slide and push worktop lid back
into position, ensuring front edge is
correctly located into the console.
Failure to do so may
cause damage to your
machine!
DO NOT REMOVE!
Old hoses may cause leaks
due to worn out washers.
Replace the work top lid
using the 3 original screws.
DRAINAGE SYSTEM... we recommend one of the following:
STANDPIPE METHOD
UNDER SINK METHOD
TE: ALTHOUGH YOU MAY NEED TO
OVE THE HOOKED END SUPPORT
ONG THE GREY DRAINAGE HOSE,
Hooked End Support
Insert drainage hose
approximately 100mm
DO NOT REMOVE IT.
into the standpipe.
.............................
OR
800mm
WHICHEVER DRAINAGE METHOD
YOU USE, MAKE SURE THAT THE
OOKED END SUPPORT IS FIXED
VEL TO, OR ABOVE THE ‘MINIMUM
DRAINAGE HOSE HEIGHT LINE’*
ee Getting to Know your Appliance)
from floor
Standpipe height:
minimum 500mm
from the floor.
Fix the hooked Attach the GREY
end support at drainage hose to the
a minimum
800mm from
the floor.
cut off the blocked
end of the under sink
drainage unit.
under sink drainage
unit securely, using a
hose clip.
6
7
CONNECT TO THE POWER SUPPLY...
READY...
WO FRONT FEET ARE
S FIRM AND LEVEL.
k and The Foot
PLUG YOUR MACHINE INTO AN ELECTRICAL SOCKET WHICH IS
EASILY ACCESSIBLE. SWITCH ON
TO CHECK ALL PARTS O
CLEAN THE INSIDE OF
SELECT A 95˚ WHITE
NOTE: Hotpoint recommend
extension leads are not used.
WITH
✗
ONLY the locking disk
he two front feet until
is up against the base
e machine.
Move your machine into position,
take care not to trap or kink the
hoses.
THIS WILL TAKE AP
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP 3
The Dispenser Drawer
1
Changing the Main
Wash Indicator:
HE WATER SUPPLY...
2
3
4
The main wash indicator
S
If you have no hot water
supply...
Check both hot and
cold water supplies
are running freely...
i
has been fitted to
dispense powder
detergent only.
A cold fill adaptor is
available from your local
Hotpoint authorised Service
Centre or by
If you wish to use liquid
detergent, reposition the
main wash indicator as
shown below:
Connect fill hoses to
water supply taps:
- Red or Grey Hose
end to Hot
- Blue Hose end to
Cold
ii
5
6
calling the
Genuine
Parts &
Accessories
Index:
Hotline
1. Drawer latch
2. Button
(see KEY
TURN ON BOTH TAPS CONTACTS).
3. Main wash
indicator
4. Main wash
compartment
Pull the drawer out until
it reaches its stop.
1
5. Prewash
compartment
6. Fabric conditioner
compartment.
Dispensing Powder
Detergent
To achieve optimum wash
results we recommend that
you use the detergent
manufacturers dispensing
cup, to dispense no more
than 300ml of powder.
Press down on button,
2
to release the drawer
latch and remove the
drawer.
Dispensing Fabric
Conditioner
Pour fabric conditioner into
the compartment.
We recommend that you do
not exceed the maximum
level indicated.
Lift the main wash
3
indicator out of slots,
rotate and reposition for
Liquid, ensuring it is
secure.
OF THE INSTALLATION AND TO THOROUGHLY
YOUR MACHINE:
COTTON WASH PROGRAMME (refer to STEP 4)
Cleaning the Dispenser Drawer &
Compartments:
HOUT ANY LAUNDRY
It is advisable to clean the dispenser
drawer regularly:
and
Remove the drawer, see ‘Changing
the Main Wash Indicator’, wash
the dispenser drawer and clean
out the compartment.
WITHOUT ANY DETERGENT
✗
Relocate the drawer and
push back into place.
4
PPROXIMATELY 2hrs 30mins TO COMPLETE
Dry thoroughly and relocate.
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP 4
Choosing a Washing Programme
IMPORTANT INFORMATION: The temperature of the incoming water supply and selection of any Optional Wash Feature, ie. Economy
Wash, will affect the programme times.
ITCL
Codes Fabric
Temp. Full
Programme
Approx. Max
Spin Speed
WASHING
WEIGHT LOADS
˚C Load Time (mins)
based on hot depending
and cold fill
on model
Two examples of
typical loads for
washing different
types of fabric:
Heavy soiled loads.
On completion, switch ‘OFF’
mains button before selecting 40
wash programme.
WARNING: Not for woollen or delicate items.
A
Prewash
3 - 5kg
15 - 25
400rpm
COTTON
Heavy soiled white cotton
2
6
6
2
4
2
Bath Towels
Shirts
B
loads (includes a prewash).
95
95
5kg
5kg
5kg
5kg
130 - 140
110 - 120
160 - 180
65 - 75
*1200rpm
*1200rpm
*1200rpm
*1200rpm
White Cotton & Linen
without special finishes.
Blouses
C
D
E
Set of Pyjamas
Sets of Underwear
Pillow Cases
Colourfast cotton, linen or
viscose without special finishes 60
Non-colourfast cotton, linen
& viscose
40
= 5kg
Coloured nylon, polyester,
acrylic/cotton mixtures, cotton
or viscose with special finishes
(eg. drip dry), coloured
SYNTHETIC
F
G
H
2
4
4
1
4
Children’s Dresses
polyester/cotton mixtures
50
40
3kg
50 - 60
45 - 50
30 - 35
900rpm
900rpm
900rpm
Shirts
Blouses
Acrylics, acetates & tri-acetate
blends of these fabrics with
wool, polyester/wool blends
Set of Pyjamas
Sets of Underwear
3kg
Quickwash for freshening up Incoming
lightly soiled items
Household
Supply
= 3kg
0.9kg
WARNING: Not for woollen items.
Woollen blankets, wool
mixtures with cotton, rayon
or silk.
40
40
2.7kg
1.4kg
40 - 45
40 - 45
900rpm
900rpm
J
Shrink resistant machine
washable wool
Start of Wash,
Final Rinse & Spin
programmes
* Maximum spin speed for Model WD64 only.
Low Heat Symbol
Wash Dial & Symbols:
Pointer
Rinses
Before selecting a wash programme, ensure the mains button is in the ‘OFF’ position.
Turn dial slowly clockwise. You will hear a click as the pointer aligns with the start of
your chosen wash programme, final rinse or spin.
Short Spin
Symbol
Letters represent
programme
Note: Failure to correctly align the pointer at the start of a wash programme will result in
detergent not being dispensed.
High Heat Symbol
End of
Programme
Long Spin Symbol
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP 5
Optional Wash Features
Button Selection:
To select, press button.
Press again to cancel.
Time Saver for Model WD64
Save 43 minutes on programme ‘D’ and up to 25 minutes on any
Economy Wash for Models WD63 and WD64
Save money and time on lightly soiled loads.
Lightly soiled clothes are washed at the temperature of the
incoming household water supply.
other wash programme.
G
Not available with programme ‘A’ or the wool programme ‘J’.
G
G
Programme ‘A’ is heated to a reduced temperature of 30˚C.
Not available with programme ‘H’.
Rinse Hold for Model WD64
Suspends your clothes in the final rinse water.
Super Rinse for Models WD63 and WD64
For larger wash loads, wash items for young children and people
with sensitive skin.
Helps minimise creasing of delicate or synthetic fabrics.
Complete final spin by cancelling this option.
G
Increases the water level of the last two rinses on all
programmes except programme ‘A’ and the wool
programme ‘J’, which increases automatically.
G
Only available with programmes ‘F, G & H’.
NOTE: Remember to cancel buttons after use!
Automatic Features
Intelligent Care:
Your appliance has an inbuilt feature to prevent it spinning with an unbalanced load, avoiding excessive vibration and prolonging
the life of the appliance.
Pulse Spin:
Helps reduce wear and tear on your laundry.
Pulse spin is an automatic function where a long, steady spin is followed by a 30 second burst at the maximum speed for your
appliance, to enable safer, more efficient water extraction.
Dry Spin:
There will be a 2 minute spin about 20 minutes after the drying programme has started; this improves the drying performance.
NOTE: This feature will not operate if you have selected a combined Wash & Auto Dry Programme for synthetic fabrics.
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP 6
Choosing a Drying Programme
DRYING WEIGHT
LOADS
Two examples of typi-
cal loads for drying dif-
ferent types of fabric:
Fabric Programme Dry Weight Programme
Time Setting
Items Not Suitable
for Tumble Drying:
Type
Load
Selector Setting (approx.mins)
SPIN
HEAT IRON DRY FULL DRY
G
Garments with the ITCL
code -
2.5kg max.
Long
Long
High
High
55
35
80
50
Natural B,C,D & E
DO NOT TUMBLE DRY.
Woollens.
G
G
COTTON
Synthetic F,G & H
2kg max.
Short
Short
Low
Low
80
45
90
60
Large bulky items eg.
quilts, bedspreads,
pillows etc... expand
when dry, preventing air
flow through the
1
3
3
1
2
1
Bath Towel
Shirts
IMPORTANT INFORMATION: A 10 minute ‘Cool Tumble’ phase at the end of
each drying cycle allows fabrics to gently cool down, minimising creasing.
Blouses
Set of Pyjamas
Sets of Underwear
Pillow Case
appliance.
All fabrics contain a little natural moisture even when ‘dry’, this should not
be lost if the clothes are to remain soft and fluffy. If clothes are subjected
to extreme drying they tend to wrinkle and consequently need more
ironing than usual. As clothes feel damper when warm, allow for this
when removing items before the ‘Cool Tumble’ phase is complete.
G
Items containing plastic
film, foam rubber or
rubber like materials eg.
pillows, cushions, PVC
rainwear or inflammable
articles which contain
inflammable substances
eg. towels contaminated
with hair lacquer.
= 2.5kg
SYNTHETIC
This machine incorporates a ‘Dry Spin’ feature, see Automatic Features.
2
Children’s
Dresses
Spin Only Option:
G
G
Fibreglass (eg. some
types of curtains).
Items which have been
dry cleaned.
2
4
1
Shirts
To select Long Spin turn wash dial
clockwise until the pointer aligns
with , to select Short Spin turn
Blouses
Set of Pyjamas
wash dial pointer to
.
= 2kg
Press the mains button ‘ON’.
Independent Drying Programme
IMPORTANT INFORMATION: Before selecting an independent drying programme, ensure the mains button is in the ‘OFF’ position.
1
2
3
4
5
6
Turn the drying dial to
Switch on both the
Press ‘ON’ to start the 1-2 minutes after
drying programme. completion of the
After a few seconds wash programme
the door will lock and the door locked
an indicator light will indicator light will
illuminate throughout go out and the door
Remove the wet
laundry and
dosing ball (if
used) until the
correct ‘Drying
Weight Load’ is
left in the drum.
Close door by
applying pressure at
the 2 o’clock position.
select a suitable drying water and electricity
time, see chart above.
supply at the mains.
the programme.
can be opened.
Switch ‘OFF’ after
use.
WARNINGS:
G If your appliance is not permanently
plumbed in, turn on the cold water supply
to the appliance and hook the drain hose
over the sink to enable to condensing
action to work.
G The dryer is intended G Be careful not to
G On no account
should liquid fabric
conditioner be
added during the
drying process.
G Misuse of the
dryer may create
a fire hazard.
for use only where
water is used for the
cleaning process.
touch the drum at
the top as this area
gets hot during
drying.
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP 7
Wash & Auto Dry Programme
1
2
3
4
5
Add detergent and/or
fabric conditioner to
the dispenser drawer
(see STEP 3).
Sort laundry by label
Select optional wash
feature (see STEP 5) by
pressing button.
Close door by
applying pressure at
the 2 o’clock position.
Select required wash
programme (see STEP
4) by turning the wash
dial clockwise.
into groups with the
same wash & dry
requirements, load
the appliance.
See Drying Weight
Load examples
(STEP 6).
6
7
8
9
Turn the drying dial to Switch on both the
select a suitable drying water and electricity
time and temperature supply at the mains.
for fabric type (see
Press ‘ON’, the door
will lock and after a
few seconds the
indicator light will
illuminate and stay lit light will go out and
1-2 minutes after
completion of the
wash programme the
door locked indicator
chart, STEP 6).
throughout the wash the door can be
& dry programme. opened. Switch ‘OFF’
after use.
WARNINGS:
G Do not allow children G Do not overload the
G Do not attempt to open the
door when water is visible in
G Do not use a dosing ball
to dispense detergent
to play with the
appliance! It may
damage laundry and
reduce the quality of
the wash.
appliance or tamper
with the controls.
the drum or if the door locked when using a wash and
indicator light is lit.
auto dry programme.
Low Heat Setting
Drying Dial:
Variable Spin Speed Control Dial:
Rotate the dial in any direction
to the required heat setting /
drying time. During operation
the dial will slowly rotate
clockwise to the next OFF
position at which point the
drying cycle will end, after a
few seconds the door locked
indicator light will go out and
the door can be opened.
Only available on Model WD64
To reduce the maximum
programmed spin speed,
turn the dial before, or
during a programme.
NOTE: The spin speed
cannot be increased again
whilst the appliance is
spinning.
Start of
Programme
Numbers
represent
drying time
End of
Programme
Pointer
Fabric Type
High Heat Setting
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP 8
Troubles
MY MACHINE MAKES A
NOISE OR VIBRATES IN A
SPIN PROGRAMME.
MY MACHINE WILL NOT
START
MY MACHINE DOE
PUMP OUT WAT
Washcare Tips:
Before washing:
Close the door. Choose a
programme and then press ‘ON’
Check all loose items, such as
coins, have been removed
from the laundry.
Has the drain hose bee
correctly?
G
G
Pre-treat stains.
Close zips, tie belts, strings etc...
and press studs to prevent
tangling.
ꢀ
Does the ‘door indicator’ light
come on after 2 seconds?
Are the drainage unit,
or under sink connect
from blockage
G
G
Remove papers or tissues from
pockets.
Remove sharp objects and coins
from pockets as they could cause
damage to clothes or the
appliance.
Limit the size of absorbent loads
ie. towels, to 3kg (7lb) to give
good washing/rinsing results.
Place small items in a wash bag.
Check wash labels as some items
may require a cool programme.
Wash non-colourfast woollens or
really dirty laundry separately as
they may affect other items.
Laundry will not wash properly if
you overload the appliance.
Laundry without a wash label
should not be machine washed.
Have both transit fixings been
removed from the machine?
ꢀ
ꢀ
ꢀ
Has ‘Rinse Hold’ been
The light will flash until
is pressed agai
Is the machine plugged in
and switched on?
✗
Has the polystyrene block been
removed from underneath the
machine?
G
ꢀ
ꢀ
Is the socket OK? Test with
another appliance to check.
G
G
Press the ‘Rinse Hold
again.
✗
✗
ꢀ
ꢀ
G
Have you adjusted the feet to
stabilise the machine?
See STEP 2: Install
Is the fuse in the plug OK?
G
G
Clear any blockages t
been found
Plug the machine in and
turn the socket switch on.
See STEP 2: Installation
Is the machine conne
a sink waste syst
If possible use another socket
for the machine.
ꢀ
Check the blocked en
under sink drainage
been cut off.
MY LAUNDRY HAS NOT
SPUN DRY.
If not replace it, see STEP 1:
Electricity Supply
Was a short spin programme
used on a non-synthetic load.
✗
WATER COLLECTS
FABRIC DISPEN
COMPARTMEN
MY MACHINE STOPS
BEFORE A SPIN
PROGRAMME.
ꢀ
There has been an
unbalanced load and the machine
could not spin. Redistribute the
clothes by hand and select a spin
only programme.
Clean fabric dispense
See STEP 3:‘The Dis
Drawer’.
The ‘Rinse Hold’ button has
been pressed, this will hold
laundry in the final rinse water,
until the button is pressed
again.
Did the water pump out?
If not see ‘MY MACHINE DOES
NOT PUMP OUT WATER’.
Download from Www.Somanuals.com. All Manuals Search And Download.
shooting
THE PROGRAMME TAKES A
LONG TIME
ES NOT
ATER
MY MACHINE IS LEAKING
en installed
✗
Check for low temperature and
low pressure for the hot and
cold water supply
OUT OF BALANCE!
Are the fill hoses on correctly?
If not tighten them.
standpipe
tions free
✗
Did you know that putting one or two
highly absorbent items in your machine
can cause it to become
es?
Is your water pressure too
high?
✗
‘OUT OF BALANCE’.
selected?
l the button
in.
ꢀ
✗
This happens because the items are
clumping together, retaining large
amounts of water and therefore acting
as a heavy weight in your machine.
SUDS ARE COMING FROM
THE DISPENSER DRAWER
Turn the main supply tap
down.
d’ button
Is the standpipe or household
drain blocked.
When your machine is ‘out of balance’ it
will not spin.
✗
Check the correct amount of
suitable detergent has been
used, refer to manufacturer’s
recommendations.
lation
ꢀ
Try adding a large item such as a
bedding sheet into the load. This will
not absorb as much water and will help
to spread the weight in the drum.
that have
You may need to call in a
plumber.
ected to
tem?
Is steam coming from the
dispenser drawer?
✗
THE LAUNDRY IS NOT DRY
AFTER USING THE DRY
PROGRAMME
nd of the
unit has
.
ꢀ
The machine is designed to
release steam from the dispenser
drawer during hot washes.
Is the cold water turned on at the
tap?
✗
✗
If the appliance is still not working
contact:
Repair Service and Information Desk
UK 08709 066 066
Republic of Ireland 1850302 200
IN THE
NSER
NT
Check the feet have been
levelled.
ꢀ
Did you select the right heat/time
setting?
You will be asked for the following
details: Name and Address, Post
Code,Telephone Number, Date of
Purchase, Colour and Model/Serial
Numbers - which can be found on
the inside of the door.
er drawer.
spenser
ꢀ
Was the laundry spun dry at the
end of a wash programme, if not
select a spin and dry option to
suit the fabric type.
Clear and precise details of the query
or fault.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting to Know your Appliance
Optional Wash Feature Buttons (depending on Model)
Dispenser Drawer
Interlocking Door System:
To Open...
Door Locked Indicator
Mains ON/OFF Button
Wash Dial
Grip the door handle and press the button whilst pulling open the door.
To Close...
Apply pressure at the 2 o’clock position until the door clicks.
Indicator Light...
When the machine is switched on, the door will lock and after a few
seconds the door locked indicator light will illuminate. The indicator light
will remain lit throughout the programme.
Drying Dial
Approximately 1-2 minutes after the programme has finished the
indicator light will go out and the door can be opened.
WARNING: Do not attempt to open the door whilst the indicator light is on.
Door Handle &
Release Button
Rating Plate
Cleaning the Exterior:
Use a damp cloth or silicon polish to clean the exterior surfaces of the
appliance.
Cleaning the Door Bowl:
Clean the internal surface of the door bowl regularly with a soft cloth.
A build up of soap powder and water hardness residue may result in
water leaking from the door.
Adjustable Feet
RED line indicates the minimum
height for the drainage hose.
DO NOT clean any part of the machine with abrasive cleaners, scouring
agents, acids, chlorine based bleach or metal polish as they may cause
damage.
Hot Water inlet point and supplied
Hose (Red or Grey end)
Cold Water inlet point and
supplied Hose (Blue end)
Maintenance Wash:
Mains Cable
We recommend a maintenance wash 2 or 3 times a year, to avoid a build
up of greasy deposits and water hardness residue.
Simply run wash programme ‘C’ without any laundry in the drum, using
the usual amount of detergent.
Drainage Hose
Retaining Flaps
Hooked End Support
Key Contacts
After Sales Service
Over 1200 trained specialists, directly employed by us, ensure that you can have complete confidence in both the appliances and
services we offer.
Repair Service and Information Desk
UK: 08709 066 066
Extended Warranties
UK: 08709 088 088
(Open 8 to 8 Mon - Fri, 8 to 6 Sat, 10 to 4 Sun & Bank Holidays)
(Open 8 to 8 Mon - Sun)
Republic of Ireland: 1850 502 200
Republic of Ireland: 1850 302 200
Note: Our operators will require the Model number and Serial number.
Genuine Parts and Accessories
UK: 08709 077 077
(Open 8-30 to 5-30 Mon - Fri & 9 to 12 Sat)
Republic of Ireland: (01) 842 6836
Download from Www.Somanuals.com. All Manuals Search And Download.
After Sales Service
“No company is better positioned to offer an after sales service on
a Hotpoint appliance than us - the manufacturer”.
Hotpoint guarantee
“Satisfaction guaranteed or your money back”
We give you a unique ‘satisfaction guaranteed’ promise - valid
for 90 days - after you have purchased your Hotpoint
appliance. If there is a technical problem simply call Hotpoint
Repair service or visit our web-site at
arrange for an engineer to call. If the technical problem is not
resolved under this guarantee, we will replace your machine
or, if you prefer, give you your money back.
As part of our commitment to you, all Hotpoint appliances have the
added benefit of a fully inclusive parts and labour guarantee for the first
12 months. In addition to this you also have the advantage of free
replacement parts for the first 5 years when fitted by a Hotpoint
engineer. When the 12 months parts and labour guarantee expires we
offer the following after sales service options:
Repair Service and Information Help Desk
UK: 08709 066066
Republic of Ireland: 1850 302 200
Note: Our operators will require the Model number and the Serial number
of your appliance.
All Hotpoint appliances carry a fully inclusive 12 month parts
and labour guarantee as well as free replacement parts for the
first 5 years (except microwaves, selected integrated
appliances and cooker hoods, which have a one year
guarantee) provided that they are fitted by a Hotpoint
engineer.
Available 364 days a year with a fast, effective and value for money
service. We have the largest white goods repair service in the UK with over
1200 of our own fully trained engineers. All repairs include a parts and
labour guarantee for 12 months from the date of the repair.
If you require any information or have any questions about your
appliance, our operators are on hand with help and advice.
All this ensures that you will receive the best available after sales service
possible.
Guarantee terms and conditions
Your guarantee is only applicable in the United
Kingdom or Republic of Ireland and is subject to the
following provisions that your appliance:
G
Has been installed and used correctly in accordance with
this instruction booklet.
Has been used solely for domestic purposes and is located
on domestic premises (ie. not for commercial or trade
use).
Extended Warranties
UK: 08709 088 088
Republic of Ireland: 1850 502 200
G
G
G
Has been properly connected to a suitable electrical
supply voltage as stated on the appliance rating plate.
Has not been subject to misuse, accident, modified or
repaired by anyone other than one of our own service
engineers.
Whether you have just one or a number of Hotpoint appliances in your
kitchen, we offer two service cover plans to give you total peace of mind.
G
Repair Protection Plan - FREE service repairs for a single Hotpoint
appliance during the period of cover.
G
Kitchen Cover
- FREE service repairs for all your Hotpoint
appliances less than 8 years old.
For pre purchase information on any other Hotpoint
product,
Genuine Parts and Accessories
UK: 08709 077 077
Republic of Ireland: (01) 842 6836
A wide range of genuine parts and accessories are available from our
hotline or through our web site.
Recycling & Disposal
Information
As part of Hotpoint’s continued commitment to helping the environ-
ment, Hotpoint reserves the right to use quality recycled components
to keep down customer costs and minimise material wastage.
Genuine parts and accessories, extended warranties and service
repairs are all
available on our web-site at:
Please dispose of packaging and old appliances carefully.
To minimise risk of injury to children, remove the door, plug and cut
mains cable off flush with the appliance. Dispose of these parts sepa-
rately to ensure that the appliance can no longer be plugged into a
mains socket, and the door cannot be locked shut.
General Domestic Appliances Limited, Morley Way, Peterborough, PE2 9JB.
PRINTED BY SIMLEX FOUR ASHES, WOLVERHAMPTON.
Download from Www.Somanuals.com. All Manuals Search And Download.
.
August 2002 1366200002-02
|