Hotpoint Dishwasher FDW85 User Manual

Instructions for Installation and Use  
Ultima FDW80 & FDW85  
60cm free standing  
Dishwasher  
Troubleshooting  
inside  
Download from Www.Somanuals.com. All Manuals Search And Download.  
D ISHWASHER  
Contents  
Electrical Connection  
For Your Safety  
4
5
Installation  
6-7  
8-9  
10  
10  
11  
12  
13  
14  
Before Using your Dishwasher  
Loading your Dishwasher  
What Can I Wash  
Getting to know your Dishwasher  
How to use your Dishwasher  
Programme Chart  
Care and Cleaning  
15-20  
Troubleshooting  
Information for Test Labs  
After Sales Service  
Hotpoint Guarantee  
Key Contacts  
21  
22  
23  
Back Cover  
Retention of this Instruction Book  
This Instruction Book must be kept handy for reference as it contains important details on the safe and proper use of the  
appliance.  
If you sell or pass the appliance to someone else, or move house and leave it behind, make sure this Book is also  
provided so the new owner can become familiar with the appliance and safety warnings.  
If the Book is lost or damaged a copy may be obtained from:  
IndesitCompanyUKLtd.MorleyWay,Peterborough,PE29JB  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Electrical Connection  
WARNING: This appliance must be earthed.  
Fuses  
Safety Information  
Your appliance comes fitted with a plug and a 13A fuse. If you need to  
replace the fuse, only those rated at 13A and ASTA approved to  
BS1362 should be used. If you lose the fuse cover, a replacement  
may be obtained from your local authorised Service Centre or  
Electrical company. Correct replacement is identified by colour coding  
or the marking on base of plug.  
At the time of delivery...  
All functions of your dishwasher have been thoroughly tested at the  
factory.  
A small number of water marks may have been left as  
a result, they will disappear when the appliance is  
used for the first time.  
WARNING: DO NOT use the plug unless the fuse cover is fitted.  
WARNING: The dishwasher must not be connected to the  
electricity supply while installation is being carried out.  
Changing the Plug  
-
This appliance should only be connected to a 230/240V AC  
source, via a properly installed earthed socket.  
Use the dishwasher solely in a domestic environment.  
DO NOT stand or place heavy objects on the door when it is  
open, this could damage the door or cause the appliance to tip  
forward.  
Cut off and dispose of the supplied plug if it does not fit your socket.  
WARNING: To avoid a shock hazard DO NOT insert the  
discarded plug into a socket anywhere else.  
-
-
IMPORTANT: WIRES IN THE MAINS LEAD ARE COLOURED IN  
ACCORDANCEWITHTHEFOLLOWINGCODE:  
Green/Yellow  
Blue  
Brown  
-
-
-
Earth  
Neutral  
Live  
If your family includes children...  
-
DO NOT allow children to play with the appliance or tamper  
with its controls.  
If you change the plug, the colour of the wires in the mains lead may  
not correspond with the terminal markings in the plug, which if not  
coloured, could be:  
EARTH  
NEUTRAL  
LIVE  
-
Keep detergents and rinse aids away from children. Keep  
children away from the open door of a dishwasher, there could  
still be some detergent left inside.  
‘E’ or  
‘N’  
‘L’  
CAUTION:  
Changing the Mains Lead  
The dishwasher meets the requirements set out by the regulations in  
force concerning safety and electrical equipment.  
Any technical checks should be conducted exclusively by a trained  
and authorised technician: Repairs carried out by unaithorised  
persons will invalidate the guarantee, as well as posing a potential  
hazard to the user.  
A lead can be ordered from Hotpoint Service  
UK: 08709 066 066 or  
Republic of Ireland: 1850 302 220  
If you have damaged the existing lead or require a longer one a  
charge will be made. It is strongly advised that this work is carried out  
by a qualified electrician.  
The manufacturer declines all responsibility for damage to persons or  
property resulting from failure to observe the above precautions, from  
tampering with even a single component or from the use of non-  
original spare parts.  
If the domestic wiring includes a residual current-operated circuit  
breaker, ensure that it conforms to the latest regulations.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
For your Safety  
This manual forms an integral part of the appliance. It must always be kept handy for reference. Read through all the instructions contained in this  
manualbeforeusingthedishwasher.  
Installation must be performed by a qualified technician, in compliance with the regulations in force,  
including the prevention and elimination of radio frequency interference.  
The dishwasher is designed for washing and drying dishes, any  
other use shall be considered improper. The manufacturer  
declines all responsibility for uses other than those described  
above.  
7. DO NOT install outdoors, not even if the area is covered by a roof: it  
isextremelydangeroustoleaveitexposedtorainandthunderstorms.  
8. If installed on a carpeted or covered floor, ensure that the openings  
on the underside are not obstructed.  
1. Seperate the various packaging materials and dispose of safely -  
DO NOT leave discarded packaging material around the home.  
2. Afterremovingthepackaging, checktomakesureyourapplianceis  
intact. If in doubt, contact a qualified professional.  
9. Do not touch the heating element during or straight after a wash  
cycle.  
3. DO NOT use extension leads and multiple plugs. If the electricity  
supplywireisnotlongenough, thenhaveitreplacedwithoneofthe  
correct length and remember that it should be free of bends or  
dangerous kinks.  
4. In the event of any damage to the power cord have it replaced by a  
qualified technician.  
5. The mains plug must be easily accessible after installation.  
6. Iftheapplianceisnotoperatingproperlyorifmaintenanceoperations  
are necessary, disconnect the dishwasher from the mains power  
supply (unplug it!).  
10. If the appliance malfunctions, turn off the water inlet tap and  
disconnect the plug from the wall socket. Then read the section  
entitled "Troubleshooting". If you cannot resolve the problem, then  
call Hotpoint Service (see KEY CONTACTS, back page).  
11. Cutlery and sharp utensils should always be inserted in random  
order with the blades pointing downwards (take care with knife  
blades).  
12. For your own safety, ensure the door is closed when the  
dishwasher is not in use.  
The rating plate, featuring the technical data, serial number and  
markings, is visibly positioned on the inner edge of the door.  
DO NOT remove the rating plate.  
The dishwasher is intended for use by adults: DO NOT allow  
1. DO NOT use solvents, such as alcohol or turpentine which may  
children to come near or play with the controls.  
cause an explosion.  
Keep children away from detergents and clear of the dishwasher  
door when open.  
2. DONOTloaddishestowashthataresoiledwithash, waxorpaints.  
3. DO NOT lean, sit or stand on any part of the dishwasher - this could  
cause injury and/or damage the appliance.  
Keep all packaging material away from children.  
4. DO NOT drink any water residues from inside the dishwasher.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
ConnecttotheWaterSupply...  
Standpipe:  
Choose where you want to install  
your dishwasher, you can place it  
so that its sides or back panel are  
side by side with furniture or up  
againstthewall. Thedishwasheris  
providedwithwatersupplyanddrain  
hoses, which can be directed  
towards the left or right to facilitate  
appropriateinstallation.  
SinkWasteSystem:  
Forundersinkdrainage:  
- For your dishwasher to operate Ensurethatthehoseisnotpushed  
correctlyitrequireswaterpressures toofardownthestandpipe.  
in the range of 6-150 psi (100- Iftheendofyourdrainhoseisfitted  
1000KPa).Mostcoldwatersupplies withretainingflaps’,ensuretheyare  
willbeinthisrange.NOTE:lowwater insertedfullyintothestandpipe. This  
pressure will lead to excessively will prevent the pipe from jumping  
Before connecting the drain hose,  
remove any internal restrictions -  
Thiswillpreventabuildupofdebris  
whichcouldcauseablockage.  
Remove any restrictions from the  
waste spigot and ensure that the  
sealingbungisremoved. Thehose  
should be routed, such that it is  
raised to a minimum height of  
800mm(31/2”).  
longfilltimesornofill.  
out during installation and use.  
-Ensurethatthenewhosesupplied  
is connected and the old hose is  
disposedofsafely.  
-Ensurethefillhoseisonlyfittedto  
the cold water supply. DO NOT  
overtighten the hose connector,  
handtightissufficient.  
Levelling.  
Once the appliance is positioned,  
adjustthefeetbyscrewingthemin  
or out depending on how high you  
want it and to level it so that it is  
horizontal. Make sure that it is not  
inclinedmorethan2degrees. Ifthe  
applianceislevel, itwill helpensure  
itscorrectoperation.  
- Ensure the fill hose is not kinked.  
-Tapconnections(ifapplicable):A DO NOT position the standpipe  
range of adaptors are available to near an electrical outlet.  
suit your tap.  
ENSUREthatthedrainhoseisnot  
-DONOTconnectthedishwasher kinked and it is routed as shown in  
toasingleoutletinstantaneouswater thediagram.  
heater or an electric heater.  
NOTE: Ensure the sink outlet  
pipehasaminimumdiamtereof  
32mm.  
Coldwaterconnection.  
The standpipe should have a bore  
Connect the cold water supply  
hose, and making sure that it is  
fastened tightly in place . If the  
waterhosesareneworhavebeen  
outofuseforanextendedperiodof  
time, letthewaterruntomakesure  
it is clear and free of impurities  
beforemakingtheconnection.Ifthis  
precaution is not taken, the water  
inlet could get blocked, causing  
damagetoyourdishwasher.  
Drainhoseconnection.  
of at least 38mm (11/2”). It should  
WARNING: Connect your be installed as shown, have a trap  
dishwasher drain hose to pipes fitted and must discharge into the  
which connect to the foul drain same drain system as your  
system and not to surface water household sink.  
drains.  
IMPORTANT: For the correct It MUST NOT be connected to a  
operation of your dishwasher, it is surfacewaterdrain.  
essential to comply with the  
1. Untie the end of the GREY  
drainage hose from the rear of the  
appliance.  
2. Reposition the ‘Hooked End  
Support’ as required along the  
GREYdrainagehose.  
following information:  
3. If fitting an under sink waste  
disposal unit, cut out the  
membrane, bungorblankingplug.  
Ensurethedrainhoseis  
securelyattached, topreventit  
coming away while the  
machineisinuseandcausing  
a flood.  
Remember you will be charges for a service call is a problem with  
yourapplianceiscausedbyincorrectinstallationormisuse.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
2
3
4
5
INSTRUCTIONS FOR INSTALLING THE DISHWASHER IN  
FULLY-FITTED KITCHENS.  
Your freestandingdishwasher canbeinstalledinmodernkitchensasfollows:  
l to stand next to furniture units or other electric household appliances  
(Pleasereadthechapteron “Installationintheinstructionmanual.)  
l to insert or built-in under the one worktop.  
Shoulditbenecessarytoremovethetopshelfofthedishwasher,proceedasfollows:  
Unscrewthe2rearscrewsandthen, withalightpushforward, letitslideoutandremoveit(seefig.1)  
Discardthepolystyrenerectangle.  
Openthedoorand, afterunscrewingthefixingscrews, removethe3plasticplugsusedtohooktheshelfon(fig. 2)  
Glueonthesmallsoundproofingadhesivespongystripontothetopcrosspiece(photo3)and,aftertiltingtheappliance,glue  
onanotheroneunderneaththebase(photo4).  
Straightenuptheapplianceandadjustthefrontandbackfeetbyunscrewingtheminananti-clockwisedirectiontoraisethe  
dishwashertotherequiredheight.  
Inserttheapplianceunderneaththeworktop(fig.5),checkingthattheinletandoutletpipesdonotgetbentorsquashed (please  
readtheinstructionsprovidedintheInstallationchapter).  
–Openthedishwasherdoorandglueonthetwoequal-sizedadhesivespongystripsonthefrontedgeoftheappliancecabinet.  
Beginfromthetopwithoutleavingoutanyspacesandmakesurethestripsadhereallalongthelengthoftheedge.Asmallpart  
ofthespongystripprotrudingontotheoutsidewillblockanylightleftbetweenthedishwasherandadjacentcabinets, thus  
improvingthesoundproofing.  
Warning:  
Thedishwasherplugmustbewithinaccessoncetheappliancehasbeenbuiltin,inordertoallowformaintenancetobecarried  
outsafely.  
Thestructureofyourdishwashermakesitimpossibletofititunderahob.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before Using your Dishwasher  
C
B
The detergent  
D
Use the right amount of detergent  
(seeprogrammechart).  
Store your detergent and rinse aid  
inacool,dryplace,safelyawayfrom  
children.  
Eachtimeyouloadthedishwasher,  
adddetergergent.Pourdishwasher  
detergent into thedispenser on the  
insideofthedoor.  
Addingdetergent  
ToopenlidA, pressbuttonB.  
Thedetergentshouldbeputintothe  
twocontainersCandD.  
If using a tablet, put it in container  
"D".  
Now you can close the lid: press it  
down until you hear it click.  
If it won't close  
Check whether there is any  
detergent residue on the edges of  
thedispenser. Removetheexcess.  
A
Warning  
Three-in-one dishwasher tablets are now available on the market, and combine detergent, salt and rinse aid all in one.  
If the water in your area is hard or very hard, we still recommend you pour extra salt into the relevant dispenser to prevent the  
formation of white streaks on your dishes or on the interior of the appliance.  
Using a three-in-one product means it is no longer necessary to put rinse aid into the relevant container.  
If you want to achieve perfectly dry dishes, you may add rinse aid as long as the dosage adjuster is set to no.2.  
In any case, please read the manufacturer's instructions on the packet.  
If you use only these products, it is normal for the salt and rinse aid indicator lights to flash permanently after a certain number of  
cycles.  
Rinse aid.  
F
C
- The amount of rinse aid  
needs to be increased if the  
dishes appear dull or you can  
see circular stains.  
Rinse aid makes dishes sparkle  
moreasitimprovestheirdrying.The  
rinseaidcontainerissituatedonthe  
insideofthedoor.  
- The amount of rinse aid  
needs to be reduced if the  
dishes are sticky or you can  
see white streaks.  
Youshouldfilltherinseaidcontainer  
when indicator D lights up on the  
container (see right) and the rinse  
aidindicatorlight"U"onthecontrol  
panelflashes.  
Addingrinseaid.  
To open the dispenser, turn cap C  
anticlockwise. Takecarewhenyou  
pour in the rinse aid to avoid it  
overflowing.  
You can regulate the amount of rinse aid used by the dishwasher,  
move the adjuster F which you will find under lid C.  
You can choose from six different positions. It is normally set to 4.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before Using your Dishwasher  
To prevent rust  
from forming, load  
the salt just before  
beginning a wash  
cycle.  
Adjusting the water softener.  
Water hardness varies according  
towhereyoulive. Ifthewaterinyour  
homeishard, withoutwatersoften-  
ing,incrustationswouldformonyour  
dishes. Your dishwasher is fitted  
with a water softener which uses  
special salt to get rid of limescale in  
thewater.  
Your dishwasher can adjust its salt  
consumptionaccordingtothehard-  
nessofthewaterinyourhome.This  
way, youcanoptimiseandcustom-  
ise your dishwasher's salt con-  
sumption.  
Water Hardness  
Salt  
Autono-  
consu-  
Clarke  
degrees  
Selector  
position  
my  
°fH  
mmol/l  
mption  
(grams/-  
cycle)  
(cycles\2-  
kg)  
0 - 14  
0 - 17  
0 -1,7  
/
0
/
14 - 36 18 - 44 1,8 - 4,4  
36 - 71 45 - 89 4,5 - 8,9  
"-"  
20  
40  
60  
60  
40  
25  
Salt Tap  
MED  
"+"  
To adjust salt consumption, do as  
follows:  
>71  
> 89  
> 8,9  
1. Unscrew the salt container cap  
2. There is an arrow on the neck of  
the container (see figure): if  
necessary, turn the arrow anti-  
clockwise from the "-" setting  
to the "+" setting.  
Select the arrow position  
depending on the water  
hardness, referring to the table.  
IMPORTANT:  
Only use recommended dish-  
washer salt. DO NOT use  
everyday table salt, cooking salt,  
as they containe insoluable  
substances which could harm the  
dishwasher.  
You don't know how hard the water in your  
home is? Ask the company that supplies  
water in your area.  
Salt  
Filling the salt container.  
Always use salt which is intended for dishwasher use.  
The salt container is situated underneath the lower basket, fill it up as  
follows:  
1.Pulloutthelowerbasketcompletely, unscrewandremovethecontainer  
cap  
2. If it is the first time you add the salt, first fill the container up with water  
(you won't have to do this again next time)  
3. Put the dishwasher funnel on the hole and pour in approximately two  
kilos of salt. It is normal that some water comes out of the container.  
4. Screw the cap back in place carefully.  
When to add salt:  
The salt container should be filled up when the low salt indicator light “T”  
flashes on the control panel.  
When you have loaded salt for the first time, it is normal for the low salt  
indicator light to stay on for at least 5 consecutive cycles.  
WARNING:  
DO NOT pour detergent into the special salt container.  
This will destroy the water softener.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Loading your Dishwasher  
First of all.  
Before placing dishes in the basket?  
What goes into the lower  
Load examples  
lower basket  
upper basket  
baskets, remove all course food  
remains. This avoids blocking the  
Werecommendyouplacethemost  
difficultdishestowashintothelower  
filter, which would reduce the basket: saucepans, lids, soup  
efficiencyofthewash.  
dishes and plates (a load example  
isshowninthephoto).  
If saucepans and frying pans are  
verydirty,allowthemtosoakbefore  
beingwashed.  
To make it easier to load your  
dishes, pullthebasketsout.  
Servingdishesandlargelids:  
place them on the sides of the  
basket.  
Saucepans,saladbowls:must  
alwaysbeplacedupsidedown  
Very deep dishes: placethem  
obliquely, thusallowingwaterto  
run down them and cleaning  
thembetter  
Multisystem baskets  
Thedishwasherisfittedwithupper,  
lower and cutlery baskets. They  
providegreaterflexibilityforloading  
dishes,makingthemmoresuitable  
for your specific needs.  
The basket handles can be  
removed for cleaning. Pull out the  
two fastening plugs, remove the  
handles and rinse under running  
water. Replace the handles fixing  
theminplacewiththetwofastening  
plugs.  
Glasses and cups: position  
themasshowninloadexample  
photo.  
The cutlery baskets can be split up  
by pulling out the handle.  
When you only have a little cutlery  
to wash you can use just half the  
basket, save space for other  
crockery or place the other half in  
the upper basket instead (see  
figuresAandB).  
This basket is equipped with two  
removablegrids.Cutleryandsharp  
utensils should always be inserted  
in random order with the blades  
pointingdownwards(takecarewith  
knifeblades). Positionthemsothat  
theydon’ttouch.  
What goes into the upper  
basket?  
Placedelicateandlightweightdishes  
in the upper basket: glasses, tea  
cupsandcoffeecups, saucersand  
plates-shallowsaladbowls, slightly  
dirtyfryingpansandshallowpans.  
Positionlightweightdishesinsucha  
way as to avoid their being moved  
by the spray of water.  
The dishwasher can also be  
equipped with one or two tip up  
compartments onto which you can  
place mugs and cups, as well as  
long sharp knives and serving  
cutlery.  
B
A
Afterloadingthedishes, remember  
to check that the spray arms can  
turnfreelywithouthittingagainstany  
dishes.  
What can I Wash  
Items not suitable for the dishwasher:  
Cutleryandtablewaremadefromwoodorpartwood-Theymaybecomefadedandunsightlyinappearance.  
How to adjust the upper  
basket.  
Theupperbasketcanbesetinhigh  
or low position to enable you to  
organiseyourdisheseffortlessly.  
Avoidwashinghornhandledandbronzecutleryinthemachine.  
Delicate/decorative glassware and vases, special antique or irreplaceable china - the decorative patterns  
printedontheseitemswillnotbedishwasherproof.  
Plastic objects that are not resistant to hot water.  
Copper and Pewter utensils. Aluminium and Silver objects.  
Some types of glass can become opaque in appearance after they have been washed too many times in a  
dishwasher.  
F i g . C  
Highlyabsorbentmaterialssuchasspongesandtowelsshouldneverbeplacedinadishwasher.  
If in any doubt, check with the manufacturer on items suitability for dishwasher’s.  
WARNING: Dishes or cutlery soiled with tobacco ash, wax, lubricating grease or paint should not be  
put in the dishwasher.  
Our recommendation: In future, only purchase table or kitchenware  
that has been confirmed - dishwasher proof.  
There are two handles on the sides  
of the upper basket, use these to  
adjust its height (see fig.C).  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting to know your Dishwasher  
4
5. Top spray arm  
6. Lowerbasket  
7. Washing filter  
1. Basket height adjuster  
2. Salt container cap  
3. Bottom spray arm  
4. Upperbasket  
1
5
8. Detergent and rinse aid  
dispenser  
2
3
6
7
The Controls  
M
8
I
H
B
E
F
A
G
N
D
T
U
L
Q
P
S
M. Mode button  
A. ON-OFF display button  
Press this button to turn the  
display on.  
G. Extra drying indicator light  
To indicate that extra drying  
has been set.  
S. ‘Selection’ button  
Press this button to select the  
auto Duo-Wash cycle, the  
Delayed Start, the extra drying  
and the half load.  
Press this button to select the  
following functions: Delayed  
Start, Extra Drying, Basket  
selection.  
B. Display  
H. Cycle phase indicator lights  
Pre-Wash, Wash, Rinses,  
Drying.  
Displays the functions in  
progress.  
N. Basket indicator  
T. Low salt indicator light  
This light tells you that is is time  
to add more salt.  
U. Low rinse aid indicator light  
This light tells you that it is time  
to add more rinse aid.  
Shows which basket you have  
selected for the Half Load.  
P. Cycle select button  
Press this button to select the  
desired cycle.  
D. Start/Reset button  
With Start, the wash cycle  
begins, whereas all the settings  
are cleared with Reset.  
E. Auto Duo-Wash cycle  
indicator light  
I. Wash cycle symbols  
A wide range of wash cycles to  
choose from.  
L. Multifunction numeric  
indicator  
Q. Water leak indicator light  
To warn you of a water leak.  
Informs you the duration of the  
cycle, the amount of time left to  
wait and any error codes.  
To remind you that the Duo-  
Wash cycle has been set.  
F. Delayed Start indicator light  
This indicates that delayed start  
has been set.  
Thisdishwasherconformstothe  
followingEuropeanCommunity  
Directives:  
7HFKQLFDOꢀFKDUDFWHULVWLFV  
Width  
cm. 60  
cm. 60  
73/23/EECof19/02/73(Low  
Voltage)andsubsequent  
modifications;  
Depth  
Height  
cm. 85  
89/336/EECof03/05/89  
(Electromagnetic  
Capacity  
12 standard place settings  
Compatibility)andsubsequent  
modifications;  
Mains water pressure  
Power voltage  
Total absorber power  
Fuse  
4,3 psi - 145 psi (30 KPa÷ 1MPa) (0,3 ÷10 bar)  
See data plate  
See data plate  
See data plate  
97/17/CE  
(Labelling)  
2002/96/CE  
(WasteElectricaland  
ElectronicEquipment)  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to use your Dishwasher  
Delaying the start of a  
Half load.  
Thisoptionisavailablewithallwash  
cycles.  
Indicator lights.  
First of all.  
programme.  
Cycle phase indicator lights "M"  
keepyouinformed. Eachwilllight  
uptoshowyouwhichcyclephase  
is in progress: Pre-Wash, Wash,  
RinseorDrying.  
-Pluginandswitchon.  
Whenyouhaveloadedthedishes,  
youcanchoosewhentostartyour  
dishwasherbeforesettingthewash  
cycledesired.  
Press button"M" (Mode)andthen  
selectthesymbolcorrespondingto  
theDelayedStart  
Therectanglealongsidewilldarken  
toshowselection.Nowpressbutton  
Stoselectthedelayedstartby1  
to24hours.Ifyoupressthisbutton  
again, thewordOFFisdisplayed  
(noselectionmade).  
Eachtimethebuttonispressed, a  
beep will sound - Once you have  
madeyourselectionmakesurethe  
door is shut and press the Start  
button"D".  
- Turn on the water supply tap  
completely.  
Yourdishwasheralsoallowsyouto  
washhalfaload(usingonebasket),  
tosavewater,electricityanddeter-  
gent(useonlyhalftheamount).  
Press button "M" (Mode)  
repeatedly until symbol "N" is  
selected, the corresponding  
rectanglewilllightup.  
- Add the correct amount of  
detergent.  
-Loadthebasketscorrectly.  
-Checkthatthesprayarmsrotate  
freely.  
-Closethedoorsecurely.  
UsingbuttonS(Select)youcan  
decidetowashahalf-loadoneither:  
- Press the Stand-by button  
"A".The display turns on and 4  
dashesappear,theseindicatethat  
the dishwasher is now awaiting  
instructions.  
Modifying a wash cycle in  
progress.  
The upper basket  
thelowerbasket  
Eachtimeyoupressthebuttonyou  
will hear a beep and the  
correspondingsymbolwilllightup.  
Whennosymbolislititmeansno  
selectionhasbeenmade.  
or  
Ifyouhavechosenthewrongcycle  
-Youcanmodifythewashcycle,if  
it has only just started. Keep the  
Resetbutton "D" pressedinfor a  
fewseconds,aprolongedbeepwill  
sound,followedby3short beeps.  
Select the wash cycle.  
Select the wash cycle by  
pressing button "P". Each  
time you press the button, Thewashcyclesymbolwillgoout  
a beep will sound and the and4dashesappeartoshowthat  
The countdown to the start is  
displayed. When this time  
elapses, the wash cycle  
begins and the time left will  
come up in the display.  
Onceyouhavemadetheselection,  
pressStarttobeginthewashcycle.  
corresponding symbols  
will light up in sequence.  
all settings have been cancelled.  
You are now able to reselect the  
correctwashcyclethatyourequire.  
“Extra” drying  
If you want your dishes to be  
perfectlydry:  
Have you changed your  
mind?  
Ifyoudecideyourequireadifferent press the button “S” to selec tthe  
delay start period, press the "M" extra-dry,selectthebasket/stobe  
You've left out a dish?  
Interruptthewashcyclebypressing  
theStand-bybutton"A".Openthe  
door and insert the dish you had  
forgotten,closethedoorand press  
thesamebuttonagain.  
usedanddelayedstartifrequired.  
IndicatorGwillshowsymbol  
(Mode) andS(Select)buttonsand  
makeadifferentselection.  
Ifyouwanttocancelthedelaystart  
andstarttheselectedwashcycle  
Selectthewashcyclemostsuitable  
forthetypeofdishestowash(see  
‘Programme Chart’).  
when it has reached the  
PressandholdtheStartbutton"D"  
for a few seconds and the wash  
cycle begins. If you left the door  
open, the word ‘DOOR’ will be  
displayed-shutthedoorandpress  
theStartbuttonagain.  
immediately,presstheS(Select) drying phase.Thesymbol  
button repeatedly until it is set to will flash for approximately 4  
Thecyclewillstartupfromwhere  
youinterruptedit.  
secondsandthewordOFFappears  
on the display (extra drying  
disabled).  
IfyouimmediatelypressbuttonD”  
Start,youwillhearaprolongedbeep  
andthewordONwillappearonthe  
displayandextradryinghasbeen  
selected.  
Onceyouhavecompletedallyour  
selections, shutthedoor. Youwill  
hearabeepandthewashcyclewill  
start,eitherimmediatelyorafterthe  
delayedstartifselected.  
Rememberthatwithextradrying  
selected the programme will last  
longer.  
zero. The indicatorwillturnoff.  
The delayed start is also reset  
automatically, should you fail to  
select a wash cycle within 15  
seconds.  
Cycle end  
The end of the wash cycle is  
indicatedby2shortbeepsand the  
word ‘END’ flashes up on the  
display.  
Abeepsounds:thewashcyclehas  
started and only the symbol  
correspondingtotheselectedwash  
cycleisdisplayed.  
Duo-Wash cycle  
This is a special cycle that runs a  
different wash on the two basket  
positions.  
Youcanseetheamountoftimeleft  
untiltheendofthewashcycleon  
thecounter"L".  
Warning:  
Turnthedisplayoffbypressing  
theStand-bybutton"A".,unplug  
theappliancefromtheelectricity  
sockettocutoffthepowersupply;  
the power supply cable should  
consequently be easily  
accessible.  
- Upper basket: delicate, for  
glasswareandglasses.  
- Do not expect a precise  
countdown as the wash cycle  
startswithanestimatedcycletime  
and the sensor automatically  
updates this as the cycle  
progresses(timewouldbeaffected  
bysuchthingsaswatertemperature  
anddegreeofsoiling).  
--Lower basket: heavy duty, for  
saucepansandfryingpans.  
There'sbeenapowerfailureor  
youopenedthedishwasherdoor  
Pressbutton"M" (Mode)andthen  
selectthesymbolcorrespondingto  
Duo-Washand pressbutton"S"  
(Select) ‘on’ means it is selected  
andtherectanglealongsideitwill  
light up, whereas ‘off’ means it is  
disabled.  
Afterapproximately5secondsyou  
willautomaticallyquitthemenu.  
Now press Start and the wash  
cyclestartisindicatedbyabeep.  
Turnoffthewatertap.  
Thewashcyclestopsandthen  
restartswhentheelectricity  
comesbackonorwhenyouclose  
thedoor.  
Waitafewminutesbeforeunloading  
thedishes:theyareveryhot!Ifyou  
wait a little while, they dry better  
due tothesteam.  
Have you left the dishwasher  
door open?  
The word ‘DOOR’ will flash  
up on the display. Shut the  
dishwasher door and the  
selected wash cycle will  
start.  
Foryourownsafety,ensurethedooris  
closedwhenthedishwasherisnotin  
use.  
Emptythelowerbasketfirst.  
Ensurethewashcyclehasended  
before attempting to remove any  
dishes.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programme Chart  
Select the most suitable programme for the type of dishes and how dirty they are. To select the wash programme see the chart below:  
Salt, rinse aid, the right amount of detergent and the correct wash cycle.  
This is the formula to get the best results and to keep your dishwasher in shape.  
CYCLE  
CYCLE SELECTION  
INSTRUCTIONS  
CYCLE  
DESCRIPTION  
DETERGENT  
FOR PRE-  
WASH & WASH  
RINSE WASH CYCLE  
AID  
DURATION  
(Tolerance  
±10%without  
extra drying)  
in minutes  
Very dirty dishes and pans  
(NOT to be used for delicate  
items)  
Pre-wash with hot water at 40°C  
Wash at 65°C  
2 cold rinses  
Hot rinse at 70°C  
Drying  
INTENSIVE  
5 + 25 g  
120  
88  
*
Cycle for normally dirty pans and Wash at 55°C  
dishes.  
Standard daily cycle.  
NORMAL  
ECO  
Cold rinse  
Hot rinse at 70°C  
Drying  
30 g  
*
*
Environmentally friendly cycle,  
with low energy consumption  
levels, suitable for normally dirty  
pans and dishes.  
2 cold pre-washes  
Wash at 45°C  
Hot rinse at 65°C  
Drying  
5 + 25g  
145  
24  
Economic and fast cycle to be  
used for slightly dirty dishes.  
Run cycle immediately after use. Hot rinse at 62°C  
Without drying except when the  
extra drying option has been  
selected.  
FAST  
Short wash at 40°C  
25g  
*
(with  
extra  
drying)  
Preliminary wash cycle for dishes Short cold wash to prevent food  
PRE-WASH  
DELICATES  
while awaiting completion of the  
load with the dishes from the next  
meal.  
from drying onto the dishes.  
12  
98  
Special cycle to be used for more Wash at 50°C  
delicate items which are sensitive Rrinse at 45°C  
25g  
to high temperatures.  
Run cycle immediately after use. Drying  
Hot rinse at 65°C  
*
*
Rinse and drying cycle for dishes Hot rinse at 65°C  
that are seldom used and are  
only dusty.  
SPECIAL  
GUEST  
Drying  
36  
OPTIONAL WASH CYCLE  
Wash differentiated on the two  
racks.  
Cold pre-wash  
Wash at 50°C  
AUTO DUO  
WASH  
Delicate for glassware and  
glasses on the upper rack and  
heavy duty for the pans on the  
lower rack.  
Lukewarm rinse at 45°C  
Hot rinse at 65°C  
Drying  
5 + 25g  
108  
*
To optimise wash performance and save on energy, try to use the dishwasher with a full wash load. If it takes some time to fill your  
dishwasher, use the pre-wash to avoid caked on food and build up of bad odours.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Care and Cleaning  
Going away  
DO NOT use solvents or  
abrasivestocleantheexteriorand  
rubberpartsofyourappliance, do  
not use solvents or abrasive  
cleaning products. Use a cloth  
dampenedwithlukewarmsoapy  
wateronly.  
Ifthereareanystainsonthesurface  
oftheapplianceinterior,useacloth  
dampened with water and a little  
whitevinegar,oracleaningproduct  
specificallymadefordishwashers.  
Unplug the appliance.  
Cleaning the spray arms.  
Ifthedishwasherisnotgoingtobe  
usedforsometime, carryoutthe  
following:  
Beforecarryingoutanycleaningor Food residue may become  
maintenanceonthedishwasher, encrustedontothesprayarmsand  
always remove the plug from the blocktheholeswherewatercomes  
run a cycle with the dishwasher  
empty.  
switchoffattheelectricalsocket  
andunplug.  
turn off the water supply tap,  
disconnect the inlet hose and  
allowtodrain.  
filltherinseaiddispenser.  
leavethedoorajar,topreventthe  
buildupofunpleasantodours  
insidethedishwasher.  
electricitysocket.  
out.Checkthesprayarmsregularly  
andcleanthemonceinawhile.  
After every wash.  
Whenthewashcyclehasended,  
always remember to turn off the  
watersupplytapandtoleavethe  
appliance door ajar. This way,  
moistureandbadodourswillnotbe  
trappedinside.  
The filter assembly  
Ifyouwantconsistentgoodresults  
fromyourdishwasher,youneedto  
cleanthefilterassembly.  
Removethelargerfoodparticles  
trappedinsidethecupCandthe  
semi-circular filter A after each  
wash;pullthecuphandleupwards  
to remove them. Just rinse them  
underrunningwater.  
Theentirefilterassemblyshould  
becleanedthoroughlyonceamonth:  
cup C + semi-circular filter A +  
cylindrical filter B. Rotate filter “B”  
anticlockwisetoremoveit.  
For cleaning, use a non metallic  
brush.  
Beforeusingthedishwasheraftera  
longbreak,pluginandswitchonat  
theelectricalsocket.Reconnectthe  
inlet hose and turn on the water  
supply tap. Check there are no  
deposits of rust inside the water  
pipe,ifthereareallowwatertorun  
from the supply tap for a few  
minutes.  
The seals.  
One of the factors that cause  
unpleasantodourstoforminsidethe  
dishwasher is food that remains  
trapped in the seals. Periodic  
cleaningusingadampspongewill  
preventthisfromoccurring.  
Disconnecting  
dishwasher.  
the  
Whendisconnectingthedishwasher  
itisimportantthattasksarecarried  
outinthecorrectsequence.  
switchoffatthemainsandremove  
theplugfromthesocket.  
1
turnoffthewatersupply.  
disconnectdrainandwaterinlet  
hose.  
A
B
2
pulloutthedishwasher,carefully,  
withdrawinghosesatthesame  
time.  
C
Moving the appliance.  
Drainwaterfromthedishwasher.  
Secure all loose parts. Only  
transportinanuprightposition.  
Ifnotkeptuprightduringtransport,  
anywaterremaininginsidemay  
seepintothecontrolmoduleand  
causesubsequenterrorswith  
programmefunctions.  
Reassemble the filter parts (as  
showninthefigure)andreinsertthe  
whole assembly into the  
dishwasher. Position it into its  
housingandpressdownwards.  
Thedishwasherisnottobeused  
withoutfilters.Improperreplacement  
of the filters may reduce the  
efficiency of the wash and even  
damageyourdishwasher.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
In the unlikely event that you have problems with your machine, the following guide will  
enable you to resolve many problems without having to call out a service engineer.  
Issue  
Fault Area  
Cause/How to resolve…  
PossibleInstallation/Electrical  
SupplyFault  
Check  
The Dishwasher Will Not  
Start  
- Isthedishwasherpluggedinandswitchedon?  
- Isthereapowerfailure, checktoseeifotherappliancesworking.  
- Checkthefuse.  
(Particularly if the machine  
is being used for the first  
time)  
- Isthereafaultwiththewatersupply/isthewatersupplytapturnedon?  
- Isthewaterpressuresupplysufficient?  
- Istheinlethosekinked?  
-Isthedoorclosedproperly?  
-TheSaltsymbolwillflashwhenyourdishwasherisswitchedonfor  
thefirsttimeandagainwhenthesaltlevelsbecomelow-followthe  
instructionson"BeforeUsingYourDishwasher"pageonhowtoadd  
salttoyourdishwasher.  
Salt Symbol Flashing/Not  
Going Out When Salt  
Added  
Salt symbol will flash if:  
-Youareusingthemachinefor  
thefirsttime  
Or  
- The salt level is low.  
PleaseNote:  
- Thesaltsymbolwillremainlitinthedisplayafterthesalt hasbeen  
addedforseveralconsecutivecycles.  
- Ifyou areusing3in1tabletsanddonotaddsaltthenthesaltsymbol  
willflashperiodicallyforseveralconsecutivecycles.  
-If3in1dishwashertabletsareusedwestillrecommendthatyouaddsalt  
topreventlimescaledepositsonyourdishes.  
TheRinseAidsymbolwillflashwhenyourdishwasherisswitchedon  
forthefirsttimeandagainwhentherinseaidlevelsbecomelow–  
followtheinstructionsonBeforeUsingYourDishwasherpageon  
howtoaddrinseaid.  
Rinse Aid symbol will  
flash if:  
Rinse Aid Light Flashing/  
Not Going Out When Rinse  
Aid Added  
-Youareusing themachinefor  
thefirsttime  
Or  
PleaseNote:  
Therinseaidlevelislow.  
-Therinseaid symbolwillremainflashinginthedisplayaftertherinse  
aidhasbeenadded,andwillcontinuetoflashuntilthemachinehas  
completedthenextfullwashcycle(Note:TheFast&Prewashcycles  
arenotfullwashcycles).  
-Ifyouareusing3in1tablets(or2in1)anddonotaddrinseaidthen  
therinseaidsymbolwillflashcontinuously.  
·
Check  
Possible Incorrect Fitment  
of Water Inlet Hose.  
Leaking From Rear Of  
Machine  
Isthewaterinlethoseconnectionsecuredatrearofmachine(Fig.1).  
Machine Connection  
F i g . 1  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Issue  
Fault Area  
Cause/How to resolve…  
Messages In The Display  
Your dishwasher is designed so that if a fault occurs, an error message will be  
illuminated in the display, these can consist of words or numbers.  
-Inmanycasesyoucanrectifytheseerrorcodesbyfollowing  
instructionsinthissection.-  
-Ifhowevertheerrorcodedisplayedonyourmachineisnotlisted,  
youwillneedtocontactyourServiceCentreforassistance.  
See “Key Contacts” on the back page of the instruction  
book.  
-ProgrammeTimeErratic  
-ThisisnormaltheRinsePhaseindicatorwillbehighlighted,  
astheprewashprogrammeisarinsecycle.  
Programme time example  
-RinsePhaseIndicatorHighlighted  
WhenPre-WashSelected.  
Pre-wash Programme  
Rinse Phase Indicator  
-“H20” or AL06 – Water Tap Off  
IfH20isilluminatedinthedisplay, turnonthewatertapandthe  
dishwasherwillstartafterafewminutes.  
Alternatively:  
-If you are not at your dishwasher when “H20” is  
displayed, the dishwasher will switch to alarm mode  
and the Code “AL06” will flash in the display.  
Or  
FollowtheinstructionsbelowtocanceltheAL06code:  
Step1:Press&holdtheOn/Offbuttonuntil4dashesappear  
inthe  
display.  
Step2:Turnonthewatertap  
Step3:Waitapproximately20secondsandthenswitchthe  
appliance  
on bypressingtheOn/Offbutton.  
Step4:Selectwashprogrammeasnormal.  
Please Note:  
If the above does not solve the problem, check that  
the water feed pipe filter is not blocked.  
-END flashing In Display  
“ENDwillflashinthedisplayatone-secondintervalstoindicate  
theprogrammeiscomplete&themachineisinstandbymode.  
-Indicatesendofprogramme  
-Press&holdtheOn/Offbuttontoswitchoffthedishwasher.  
On/offButton  
Please Note:  
When your dishwasher is switched back on, “END”  
will continue to flash in the display until a new  
programme is selected – This is normal.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Issue  
Fault Area  
Cause/How to resolve…  
“DemowillslideacrossthedisplaywhentheDemonstrationmode  
hasbeenaccidentallyactivated.  
Messages In The Display  
-DEMO Lit in Display  
-Demonstrationmodeactived  
FollowtheinstructionsbelowtocancelDemomode:  
On/offButton  
Step 1:  
Press&holdsimultaneouslytheOn/OffbuttonandStart/Reset  
button”, untilDofisilluminatedinthedisplay.  
Step 2:  
Selectwashprogrammeasnormal  
Start/Reset Button  
-AL05 in Display  
-PossibleFilterBlockage  
-IfAL05isilluminatedinthedisplay, thenyouneedtoclearthefilter  
ofanyblockagesbeforeprogrammecanproceed.  
Step 1: Press&holdtheOn/Offbutton”, until4dashesare  
On/offButton  
illuminatedinthedisplay.  
Step 2: Removefilterfrombaseofmachine.  
Step 3: Rinsefiltersunderrunningwaterandensurethatlarge  
foodparticles areremovedfromAreaA.  
Step 4: Locatefiltersbackintothefilterhousingandfirmlypress  
downwards.  
Step 5: TurnthedishwasheronbypressingtheOn/Offbutton,  
and selectrequiredprogramme.  
1
A
B
2
C
For additional advice on Cleaning your filter see “Care and  
Cleaning” section of the instruction book.  
Poor Wash Results  
ResidueOnDishesWhenWash  
CycleComplete  
-Istheselectedprogrammesuitableforthetypeofloadandthe  
degreeofsoiling?  
-Checktheloadingofyourcrockeryintothebaskets(SeeLoading  
YouDishwasherSectionoftheinstructionbook).  
-Checkthatthefiltersarecleanandinplace(SeeCareand  
CleaningSectionoftheinstructionbook.  
-Isthelidofthesaltcontainerclosedproperly?  
-Istherinseaiddosagecorrect?  
(See section “Poor Drying Results” below for instructions  
on adding or adjusting rinse aid to your wash).  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Fault Area  
Issue  
Cause/How to resolve…  
Poor Wash Results  
Tabletnotdissolving  
-Whereverpossiblethefollowingshouldbepositionedawayfrom  
dispenser,toensurethattheycannotcomeintocontactwiththe  
Dispenser  
-Cutlery/CutleryBasket  
-Crockery  
-CasserolesDishes/PansEtc  
SprayarmObstruction  
Upper Basket  
Upper Spry Arm  
-Priortostartingtheprogrammeensurethespraywashjetholesare  
notblockedandalsothatthesprayarmscanrotatefreely.  
21cm.  
Spry wash jet  
holes  
26 cm.  
31 cm.  
26 cm.  
Withtheupperbasketinthe  
Withtheupperbasketinthe  
lowerposition,themaximum  
heightforplatesis26cm.  
upperposition,themaximum  
heightforplatesisincreasedto  
31cm.  
To adjust the upper basket position, follow  
instructions below:  
-Toadjusttheheightsettingofyourupperbasketmovehandlesup  
ordownandthenpushinuntilyouhearitclipintoposition(SeeFig  
1):-  
·Handlepointsdownwardswhenupperbasketsettolowerposition  
(SeeFig.2).  
-Handlepointsupwardswhenupperbasketsettoupperposition  
(SeeFig.3).  
F i g . 1  
F i g . 2  
F i g . 3  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cause/How to resolve…  
Issue  
Fault Area  
-ThereisnodryingcycleontheQuickWashProgramme, unless  
youhaveselectedtheExtraDryoption.  
Poor Drying Results  
QuickWashProgramme  
Selected  
Follow instructions below on how to select “Extra  
Dry”  
Step 1: Press button marked “M” until the “Extra Dry” cycle  
indicatorishighlighted&OFFisilluminatedinthe  
display.  
Step2: ActivatetheExtraDryoptionbypressingthebuttonmarked  
“SuntilONisilluminatedindisplay.  
Pre-WashProgrammeSelected  
-ThereisnodryingcycleonthePre-WashProgramme.  
IsRinseAidbeingusedoristhe  
RinseAidlevelsettoolow?  
-Usingrinseaidinyourwashwillimprovethedryingperformance.  
To add rinse aid to your wash follow instructions  
below:  
Step1:Rotatecapanti-clockwiseandpulltoremove.  
Step2:Pourrinseaidintocontainerandsecurecapbackinto  
position.  
Cap  
The level of rinse aid used during your wash cycle can be  
adjusted to ensure best results.  
Rinse Aid Levels 1 (lowest)  
to 6 (Highest)  
RinseAidleveladjusteris  
locatedunderdispensercap.  
Usingsmallcoinrotateadjusterto  
desiredsetting.  
(We recommend setting to 4).  
Rinse Aid Adjuster  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
D ISHWASHER  
Cause/How to resolve…  
Issue  
Fault Area  
PossibleInstallationFault  
- Check  
Poor Drying Results  
(Particularly if the machine  
is being used for the first  
time)  
-Isthedrainhosekinked?  
The Dishwasher Will Not  
Drain  
- Is the sink trap blocked? (If this is the case you will  
experience problems with your sink drainage).  
-Ensuretheblankingplug/closed end connectionhasbeen  
removed if connected to a sink trap (this is the most common  
fault when installing a dishwasher).  
Note:  
Therearetwotypesofsinktrap  
drainhoseconnection.  
1.Closedendconnection:  
Ensure drain hose  
is not kinked  
Which must be cut off.  
2.Blankingpluginthesinktrap  
connections:  
Remove  
blanking  
plug/closed  
end  
Which must be removed.  
connection  
from sink  
trap.  
UnusualAmountoffoamis  
created  
- Has the correct detergent been used? (Use only Dishwasher  
powder or tablets).  
General  
-Haveyouspiltrinseaidwhenfilling therinseaidcompartment?If  
yes, thiswillclearonthenextcycle.  
DishwasherStoppingDuring  
Cycle  
-Hastherebeenapowerfailure,checkotherappliances?  
-Yourdishwasherwillstopandstartthroughoutthewash  
programme.Thisisnormal.  
-Hasthewatersupplybeeninterrupted?  
KnockingNoisecomingfrom  
Dishwasher  
- Spray arm knocking against dishes (See “LoadingYour  
Dishwasher” Section of the instruction book).  
-Crockeryhasnotbeenstackedcorrectly.  
KnockingNoiseComingfrom  
InletValves  
-Thisiscausedbythewayyouhavethewaterpipeslaidandhasno  
effectuponthedishwasherfunctions.  
-Ifyourcoldwatermainspressureissettoohigh, thenoiselevelwill  
beincreased.  
If you have completed all of the above checks and your appliance is still not  
operating, then please call your Service Centre for assistance.  
See “Key Contacts” on the back page of the instruction book.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INFORMATION FOR TEST LABS  
Load for 12 Standard Settings tests (upper rack at top position)  
Loading the detergent  
Loading the Rinse Aid  
The cleaning detergent should be introduced into the  
two containers “Comp.2” and “Comp.3”. "(see table  
at the end of the page).  
The amount of rinse aid used for each cycle can be  
regulated by turning the dose adjuster ‘F’ which you  
will find under lid ‘C’.There are 6 different settings;  
the normal dosage is setting 5.  
D
Comp.2  
Comp.3  
F
8
7
2
5
3
1
6
4
5
5
5
5
5
5
5
5
5
5
This basket is  
equippedwithtwo  
removable grids:  
insert the cutlery  
one by one into  
the slots, with the  
handles at the  
bottom. Position  
themsothatthey  
don'ttouch.  
5
3
3
3
3
3
5
3
3
3
3
3
8
3
3
4
C
7
1
1
1
1
1 1  
1 1  
4
1
1
1
1
6
7
4
4
2
4
4
4
4
4
4
2
2
4
4
2 2 2  
2
2
2
2
2 2  
door side  
Cycle  
Total detergent  
Comp.3  
Comp.2  
EN 50242  
IEC/ DIN  
25  
Eco  
30 gr.  
5
Eco+extra dry  
30 gr.  
30  
*
Press the “extra dry” button, if existing.  
*
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
After Sales Service  
"No company is better positioned to offer an after sales service on a  
Hotpoint appliance than us - the manufacturer"  
As part of our commitment to you, all Hotpoint appliances have the added benefit of a fully inclusive  
parts and labour guarantee for the first 12 months. In addition to this you also have the advantage of  
free replacement parts for the first 5 years when fitted by a Hotpoint engineer. When the 12  
months parts and labour guarantee expires we offer the following after sales service options:  
Repair Service and Information Help Desk  
UK: 08709 066066  
Republic of Ireland: 1850 302 200  
Note: Our operators will require the Model number and the Serial number of your appliance  
Available 364 days a year with a fast, effective and value for money service. We have the largest  
white goods repair service in the UK with over 900 of our own fully trained engineers. All repairs  
include a parts and labour guarantee for 12 months from the date of the repair.  
If you require any information or have any questions about your appliance, our operators are on  
hand with help and advice.  
All this ensures that you will receive the best available after sales service possible.  
Extended Warranties  
UK: 08709 088 088  
Republic of Ireland: 1850 502 200  
Whether you have just one or a number of Hotpoint appliances in your kitchen, we offer two service  
cover plans to give you total peace of mind.  
Repair Protection Plan  
-
FREE service repairs for a single Hotpoint appliance during the  
period of cover.  
Kitchen Cover  
-
FREE service repairs for all your Hotpoint appliances less than 8  
years old.  
Genuine Parts and AccessoriesUK: 08709 077 077  
Republic of Ireland: (01) 842 6836  
A wide range of genuine parts and accessories are available from our hotline or through our web  
site.  
Genuine parts and accessories, extended warranties and service repairs are all  
available on our web-site at:  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Guarantee  
"Satisfaction guaranteed or your money back"  
We give you a unique 'satisfaction guaranteed' promise - valid for 90 days - after you have  
purchased your  
Hotpoint appliance. If there is a technical problem simply call Hotpoint Repair service or visit our web-site at  
problem is not resolved under this guarantee,  
we will replace your machine or, if you prefer, give you your money back.  
All Hotpoint appliances carry a fully inclusive 12 month parts and labour guarantee as well as free replacement  
parts for the first 5 years (except microwaves, selected integrated appliances and cooker hoods, which have a one  
year guarantee) provided that they are fitted by a Hotpoint engineer.  
Guarantee terms and conditions  
Your guarantee is only applicable in the United Kingdom or Republic of Ireland and is subject to  
the following provisions that your appliance:  
l
l
Has been installed and used correctly in accordance with this instruction booklet.  
Has been used solely for domestic purposes and is located on domestic premises (ie. not  
for commercial or trade use).  
l
l
Has been properly connected to a suitable electrical supply voltage as stated on the  
appliance rating plate.  
Has not been subject to misuse, accident, modified or repaired by anyone other than one of  
our own service engineers.  
For pre purchase information on any other Hotpoint product call: 08701 50 60 70  
Recycling & Disposal Information  
As part of Hotpoint's continued commitment to helping the environment, Hotpoint reserves the right to use quality  
recycled components to keep down customer costs and minimise material wastage.  
Please dispose of packaging and old appliances carefully.  
To minimise risk of injury to children, remove the door, plug and cut mains cable off flush with the appliance.  
Dispose of these parts separately to ensure that the appliance can no longer be plugged into a mains socket and  
the door cannot be locked shut.  
Disposal of old electrical appliances  
The European Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE), requires that old household  
electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be  
collected separately in order to optimise the recovery and recycling of the materials they contain and reduce the  
impact on human health and the environment. The crossed out "wheeled bin" symbol on the product reminds you of  
your obligation, that when you dispose of the appliance it must be separately collected.  
Consumers should contact their local authority or retailer for information concerning the correct disposal of their old  
appliance.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Key Contacts  
After Sales Service  
Over 900 trained specialists, directly employed by us, ensure that you can have complete confidence in  
both the appliances and services we offer.  
Repair Service and Information Desk  
UK: 08709 066 066  
(Open 8 to 8 Mon - Fri, 8 to 6 Sat, 10 to 4 Sun & Bank Holidays)  
Republic of Ireland: 1850 302 200  
Note: Our operators will require the following information:  
Model number:  
Serial number:  
Extended Warranties  
UK: 08709 088 088  
(Open 8 to 8 Mon - Sun)  
Republic of Ireland: 1850 502 200  
Genuine Parts and Accessories  
UK: 08709 077 077  
(Open 8-30 to 5-30 Mon - Fri & 9 to 12 Sat)  
Republic of Ireland: (01) 842 6836  
Indesit Company UK Ltd. Morley Way, Peterborough, PE2 9JB  
P-195044267.05  
July 2005  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Grizzly Saw G0651 User Manual
Harbor Freight Tools Stroller 02969 User Manual
Harbor Freight Tools Tool Storage 90320 User Manual
Heat Controller Air Conditioner RAD 123H User Manual
Honeywell Air Conditioner HZ 614 User Manual
HP Hewlett Packard Switch P4459A User Manual
HTC Cell Phone ADR6300 User Manual
Huawei Network Router HG630a User Manual
Huffy Fitness Equipment M881104 User Manual
Humax Flat Panel Television LDE 32DST User Manual