Instructions for Installation and Use
Ultima DWF70 & DWM75
60cm free standing
Dishwasher
Download from Www.Somanuals.com. All Manuals Search And Download.
ISHWASHER
D
Electrical Connection
WARNING:Thisappliancemustbeearthed.
Fuses
Safety Information
Your appliance comes fitted with a plug and a 13A fuse. If you need to
replace the fuse, only those rated at 13A and ASTA approved to
BS1362 should be used. If you lose the fuse cover, a replacement
may be obtained from your local authorised Service Centre or
Electrical company. Correct replacement is identified by colour coding
or the marking on base of plug.
At the time of delivery...
All functions of your dishwasher have been thoroughly tested at the
factory. A small number of water marks may have been left as a
result, they will disappear when the appliance is used for the first time.
WARNING:Thedishwashermustnotbeconnectedtotheelectricity
supply while installation is being carried out.
WARNING:DONOTusetheplugunlessthefusecoverisfitted.
-
This appliance should only be connected to a 230/240V AC
source, via a properly installed earthed socket.
Use the dishwasher solely in a domestic environment.
DO NOT stand or place heavy objects on the door when it is
open, this could damage the door or cause the appliance to tip
forward.
Changing the Plug
Cut off and dispose of the supplied plug if it does not fit your socket.
-
-
WARNING:ToavoidashockhazardDONOTinsertthediscardedplug
into a socket anywhere else.
IMPORTANT:WIRESINTHEMAINSLEADARECOLOUREDIN
ACCORDANCEWITHTHEFOLLOWINGCODE:
If your family includes children...
Green/Yellow
Blue
-
-
-
Earth
Neutral
Live
-
DO NOT allow children to play with the appliance or tamper
with its controls.
Brown
-
Keep detergents and rinse aids away from children. Keep
children away from the open door of a dishwasher, there could
still be some detergent left inside.
If you change the plug, the colour of the wires in the mains lead may
not correspond with the terminal markings in the plug, which if not
coloured, could be:
EARTH
NEUTRAL
LIVE
‘E’ or
‘N’
‘L’
CAUTION:
Changing the Mains Lead
The dishwasher meets the requirements set out by the regulations in
force concerning safety and electrical equipment.
Any technical checks should be conducted exclusively by a trained
and authorised technician: Repairs carried out by unaithorised
persons will invalidate the guarantee, as well as posing a potential
hazard to the user.
A lead can be ordered from Hotpoint Service
UK: 08709 066 066 or
Republic of Ireland: 1850 302 220
If you have damaged the existing lead or require a longer one a
charge will be made. It is strongly advised that this work is carried out
by a qualified electrician.
The manufacturer declines all responsibility for damage to persons or
property resulting from failure to observe the above precautions, from
tampering with even a single component or from the use of non-
original spare parts.
If the domestic wiring includes a residual current-operated circuit
breaker, ensure that it conforms to the latest regulations.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
ISHWASHER
D
For your Safety
Thismanualformsanintegralpartoftheappliance. Itmustalwaysbekepthandyforreference. Readthroughalltheinstructionscontainedinthismanual
beforeusingthedishwasher.
Installation must be performed by a qualified technician, in compliance
with the regulations in force, including the prevention and elimination of
radio frequency interference.
The dishwasher is designed for washing and drying dishes, any
other use shall be considered improper. The manufacturer declines
all responsibility for uses other than those described above.
Theratingplate,featuringthe
technicaldata,serialnumber
andmarkings, isvisibly
positionedontheinneredgeof
thedoor.
1. Seperate the various 7. DO NOT install outdoors, not
packaging materials and
dispose of safely - DO NOT
leave discarded packaging
materialaroundthehome.
even if the area is covered by
a roof: it is extremely
dangeroustoleaveitexposed
torainandthunderstorms.
DONOTremovetheratingplate.
2. Afterremovingthepackaging, 8. If installed on a carpeted or
check to make sure your
appliance is intact. If in doubt,
covered floor, ensure that the
openingsontheundersideare
notobstructed.
contact
a
qualified
professional.
3. DONOTuse extensionleads
and multiple plugs. If the
9. Do not touch the heating
elementduringorstraightafter
a wash cycle.
electricity supply wire is not 10. Iftheappliancemalfunctions,
long enough, then have it
replacedwithoneofthecorrect
length and remember that it
should be free of bends or
dangerouskinks.
turnoffthewaterinlettapand
disconnecttheplugfromthe
wallsocket. Thenreadthe
sectionentitled
"Troubleshooting". Ifyou
cannotresolvetheproblem,
thencallHotpointService
(seeKEYCONTACTS, back
page).
4. In the event of any damage to
the power cord have it
replaced by a qualified
technician.
5. Themainsplugmustbeeasily 11. Cutleryandsharputensils
accessibleafterinstallation.
6. Iftheapplianceisnotoperating
properly or if maintenance
operations are necessary,
shouldalwaysbeinsertedin
randomorderwiththeblades
pointingdownwards(take
carewithknifeblades).
disconnect the dishwasher 12. For your own safety, ensure
from the mains power supply
(unplugit!).
the door is closed when the
dishwasherisnotinuse.
The dishwasher is intended for use by adults. DO NOT allow children
to come near or play with the controls.
Keep children away from detergents and clear of the dishwasher door
whenopen.
Keep all packaging material away from children.
1. DO NOT use solvents, such as alcohol or turpentine which may
causeanexplosion.
2. DONOTloaddishestowashthataresoiledwithash, waxorpaints.
3. DO NOT lean, sit or stand on any part of the dishwasher - this could
causeinjuryand/ordamagetheappliance.
4. DO NOT drink any water residues from inside the dishwasher.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
ISHWASHER
D
Installation
Cold waterconnection.
Choose where you want to install
your dishwasher, you can place it
so that its sides or back panel are
side by side with furniture or up
againstthewall. Thedishwasheris
providedwithwatersupplyanddrain
hoses, which can be directed
towards the left or right to facilitate
appropriateinstallation.
Drainhoseconnection.
SinkWasteSystem:
Forundersinkdrainage:
Connect the cold water supply
hose, inserting the small filter
supplied with the dishwasher and
makingsurethatitisfastenedtightly
in place (see figure 2). If the water
hosesareneworhavebeenoutof
useforanextendedperiodoftime,
let the water run to make sure it is
clear and free of impurities before
making the connection. If this
precaution is not taken, the water
inlet could get blocked, causing
damagetoyourdishwasher.
WARNING: Connect your
dishwasher drain hose to pipes
which connect to the foul drain
system and not to surface water
drains.
IMPORTANT: For the correct
operation of your dishwasher, it is
essentialtocomplywiththefollowing
information:-
Before connecting the drain hose,
remove any internal restrictions -
Thiswillpreventabuildupofdebris
whichcouldcauseablockage.
Remove any restrictions from the
waste spigot and ensure that the
sealingbungisremoved. Thehose
should be routed, such that it is
raised to a minimum height of
800mm(31/2”).
Levelling.
Once the appliance is positioned,
adjustthefeetbyscrewingthemin
or out depending on how high you
want it and to level it so that it is
horizontal. Make sure that it is not
inclinedmorethan2degrees. Ifthe
applianceislevel, itwill helpensure
itscorrectoperation.
Standpipe:
Ensurethatthehoseisnotpushed
toofardownthestandpipe.
Iftheendofyourdrainhoseisfitted
with‘retainingflaps’,ensuretheyare
insertedfullyintothestandpipe. This
will prevent the pipe from jumping
outduringinstallationanduse.
NOTE: Ensure the sink outlet
pipe has a minimum diamtere of
32mm.
A
Rememberyouwillbechargesfor
aservicecallisaproblemwithyour
applianceiscausedbyincorrect
installationormisuse.
Fig.2
DONOTpositionthestandpipenear
anelectricaloutlet.
ENSUREthatthedrainhoseisnot
kinked and it is routed as shown in
thediagram.
1. Untie the end of the GREY
drainage hose from the rear of
the appliance.
2. Reposition the ‘Hooked End
Support’ as required along the
GREYdrainagehose.
3. If fitting an under sink waste
disposal unit, cut out the
membrane, bung or blanking
plug.
4. Attach the GREY drainage
hose to the under sink waste
disposal unit securely, using the
clip and rubber tube supplied.
ConnecttotheWaterSupply...
- For your dishwasher to operate
correctlyitrequireswaterpressures
in the range of 6-150 psi (100-
1000KPa).Mostcoldwatersupplies
willbeinthisrange.NOTE:lowwater
pressure will lead to excessively
longfilltimesornofill.
-Ensurethatthenewhosesupplied
is connected and the old hose is
disposedofsafely.
-Ensurethefillhoseisonlyfittedto
the cold water supply. DO NOT
overtighten the hose connector,
handtightissufficient.
The standpipe should have a bore
of at least 38mm (11/2”). It should
be installed as shown, have a trap
fitted and must discharge into the
same drain system as your
householdsink.
It MUST NOT be connected to a
surfacewaterdrain.
- Ensure the fill hose is not kinked.
-Tapconnections(ifapplicable):A
range of adaptors are available to
suit your tap.
-DONOTconnectthedishwasher
toasingleoutletinstantaneouswater
heateroranelectricheater.
Ensure the drain hose is
securely attached, to prevent
it coming away while the
machine is in use and causing
a flood.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
ISHWASHER
D
Getting to know your Dishwasher
E. Upper basket
I. Bottom spray arm
J. Salt container cap
K. Washingfilter
F. Top spray arm
G. Basket height adjuster
H. Lower basket
L. Detergent and rinse aid
dispenser
M. ‘Turbo Dry’ fan
The Controls
M. Mode button
A. ON-OFF display button
Press this button to turn the
display on.
Press this button to select the
auto Duo-Wash cycle, the
Delayed Start, the extra drying
and the half load.
B. Display
Displays the functions in
progress.
N. Basket indicator
Shows which basket you have
selected for the Half Load.
P. Cycle select button
Press this button to select the
desired cycle.
C. Door opening handle
Use the handle to open the door.
D. Start/Reset button
With Start, the wash cycle begins,
whereas all the settings are
cleared with Reset.
S. ‘Selection’ button
Press this button to select the
following functions: Delayed
Start, Extra Drying, Basket
selection.
E. Auto Duo-Wash cycle
indicator light
ToremindyouthattheDuo-Wash
cycle has been set.
T. Low salt indicator light
This light tells you that is is time
to add more salt.
F. Delayed Start indicator light
This indicates that delayed start
has been set.
I
U. Low rinse aid indicator light
This light tells you that it is time to
add more rinse aid.
G. Extra drying indicator light
To indicate that extra drying has
been set.
Q. Water leak indicator light
To warn you of a water leak.
H. Cycle phase indicator lights
Pre-Wash, Wash, Rinses,
Drying.
E
F
I. Wash cycle symbols
A wide range of wash cycles to
choose from.
H
G
N
L. Multifunction
indicator
numeric
Informs you the duration of the
cycle, the amount of time left to
wait and any error codes.
U
T
Q
L
Thisdishwasherconformstothe
followingEuropeanCommunity
Directives:
Technical Characteristics
Width
60cm
60cm
85cm
Depth
•
•
73/23/EEC(LowVoltage)and
subsequentamendments;
89/336/EEC(Electromagnetic
Compatibility)andsubsequent
amendments;
Height
Capacity
up to 14 place settings
Mains Water Pressure
Power Voltage
Total absorber power
Fuse
30 KPa 1MPa (0,3 10 bar)
see rating plate
see rating plate
see rating plate
6
Download from Www.Somanuals.com. All Manuals Search And Download.
ISHWASHER
D
How to use your Dishwasher
Indicator lights.
Cycle phase indicator lights "M"
keep you informed. Each will light Whenyouhaveloadedthedishes,
up to show you which cycle phase
is in progress: Pre-Wash, Wash,
RinseorDrying.
First of all.
Delaying the start of a
programme.
Half load.
Thisoptionisavailablewithallwash
cycles.
- Plug in and switch on.
- Turn on the water supply
tap completely.
- Add the correct amount of
detergent.
- Load the baskets correctly.
- Check that the spray arms
rotate freely.
youcanchoosewhentostartyour
dishwasherbeforesettingthewash
cycledesired.
Press button"M" (Mode)andthen
selectthesymbolcorrespondingto
theDelayedStart
Therectanglealongsidewilldarken
toshowselection.Nowpressbutton
“S”toselectthedelayedstartby1
to24hours.Ifyoupressthisbutton
again, theword‘OFF’isdisplayed
(noselectionmade).
Eachtimethebuttonispressed, a
beep will sound - Once you have
madeyourselectionmakesurethe
door is shut and press the Start
button"D".
Yourdishwasheralsoallowsyouto
washhalfaload(usingonebasket),
tosavewater,electricityanddeter-
gent(useonlyhalftheamount).
Press button "M" (Mode)
repeatedly until symbol "N" is
selected, the corresponding
rectanglewilllightup.
Usingbutton“S”(Select)youcan
decidetowashahalf-loadoneither:
The upper basket
thelowerbasket
Eachtimeyoupressthebuttonyou
will hear a beep and the
correspondingsymbolwilllightup.
Whennosymbolislititmeansno
selectionhasbeenmade.
- Close the door securely.
-
PresstheStand-bybutton"A".The
Modifying a wash cycle in
progress.
display turns on and 4 dashes ap-
pear, these indicate that the dish-
washerisnowawaitinginstructions.
or
Ifyouhavechosenthewrongcycle
- You can modify the wash cycle, if
it has only just started. Keep the
Reset button "D" pressed in for a
fewseconds, aprolongedbeepwill
sound, followedby3shortbeeps.
The wash cycle symbol will go out
and 4 dashes appear to show that
allsettingshavebeencancelled.You
arenowabletoreselectthecorrect
wash cycle that you require.
Select the wash cycle.
Select the wash cycle by pressing
button "P".Eachtimeyoupressthe
button, a beep will sound and the
correspondingsymbolswilllightup
insequence.
The countdown to the start is
displayed. Whenthistimeelapses,
thewashcyclebeginsandthetime
leftwillcomeupinthedisplay.
Have you changed your
mind?
Onceyouhavemadetheselection,
pressStarttobeginthewashcycle.
“Extra” drying
If you want your dishes to be
perfectlydry:
Selectthewashcyclemostsuitable
for the type of dishes to wash (see
‘Programme Chart’).
PressandholdtheStartbutton"D"
for a few seconds and the wash
cycle begins. If you left the door
open, the word ‘DOOR’ will be dis-
played - shut the door and press
theStartbuttonagain.
Abeepsounds:thewashcyclehas
started and only the symbol corre-
sponding to the selected wash cy-
cleisdisplayed.
Youcanseetheamountoftimeleft
until the end of the wash cycle on
the counter "L".
- Do not expect a precise count-
downasthe washcyclestarts with
anestimatedcycletimeandthesen-
sorautomaticallyupdatesthisasthe
cycle progresses (time would be
affected by such things as water
temperatureanddegreeofsoiling).
Ifyoudecideyourequireadifferent
delay start period, press the "M"
(Mode) and“S”(Select)buttonsand
makeadifferentselection.
Openthedoor,turnknob“M”tothe
Resetposition,selectthebasket/s
to be used and delayed start if
required.
Startthewashcycleasnormal.
Indicator“G”willshowsymbol
when it has reached the drying
phase. The symbol will flash for
approximately4secondsandthe
wordOFFappearsonthedisplay
(extradryingdisabled).
Ifyouimmediatelypressbutton“I”,
youwillhearaprolongedbeepand
the word ON will appear on the
displayandextradryinghasbeen
selected.
Onceyouhavecompletedallyour
selections, shutthedoor. Youwill
hearabeepandthewashcyclewill
start,eitherimmediatelyorafterthe
delayedstartifselected.
You've left out a dish?
Interrupt the wash cycle by press-
ing the Stand-by button "A". Open
thedoorandinsertthedishyouhad andstarttheselectedwashcycle
forgotten, closethedoorand press
thesamebuttonagain.
The cycle will start up from where
youinterruptedit.
Ifyouwanttocancelthedelaystart
immediately,pressthe“S”(Select)
button repeatedly until it is set to
zero. The
indicatorwillturnoff.
The delayed start is also reset
automatically, should you fail to
select a wash cycle within 15
seconds.
Cycle end
The end of the wash cycle is indi-
cated by 2 short beeps and the
word ‘END’ flashes up on the dis-
play.
Turnthedisplayoffbypressingthe
Stand-bybutton"A".
Switchoffanddisconnectfromthe
electricity supply.
Turnoffthewatertap.
Wait a few minutes before unload-
ing the dishes: they are very hot! If
youwaitalittlewhile, theydrybetter
due tothesteam.
Emptythelowerbasketfirst.
Ensure the wash cycle has ended
before attempting to remove any
dishes.
Duo-Wash cycle
This is a special cycle that runs a
different wash on the two basket
positions.
Upper basket: delicate, for glass-
wareandglasses.
Lower basket: heavy duty, for
saucepansandfryingpans.
Pressbutton"M" (Mode)andthen
selectthesymbolcorrespondingto
Duo-Washand pressbutton "S"
(Select)‘on’meansitisselectedand
therectanglealongsideitwilllightup,
whereas‘off’meansitisdisabled.
Afterapproximately5secondsyou
willautomaticallyquitthemenu.
NowpressStartandthewashcycle
startisindicatedbyabeep.
Rememberthatwithextradrying
selected the programme will last
longer.
There'sbeenapowerfailureor
youopenedthedishwasherdoor
The wash cycle stops and then
restartswhentheelectricitycomes
backonorwhenyouclosethedoor.
Have you left the
dishwasher door open?
The word ‘DOOR’ will flash up on
the display. Shut the dishwasher
door and the selected wash cycle
willstart.
Foryourownsafety,ensurethedooris
closedwhenthedishwasherisnotin
use.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
ISHWASHER
D
Programme Chart
Select the most suitable programme for the type of dishes and how dirty they are. To select the wash programme see the chart below:
‘Aquasensor’washcycles...
Thismeansthatyourdishwasheris
equippedwithasensorwhichevaluates
howdirtyyourdishesareandallows
thesewashcyclestoadjustautomatically
toprovideyouwithamoreefficientand
economicwashcycle.
Salt, rinse aid, the right amount of detergent and the correct wash cycle... This is the formula
to get the best results and to keep your dishwasher in shape.
Note: In the ‘Aquasensor’ wash cycles, the cycles could undergo some modifications due to
the intervention of the sensor which evaluates how dirty the dishes are and optimises the
cycle in accordance.
CYCLE
CYCLE SELECTION
INSTRUCTIONS
CYCLE
DESCRIPTION
DETERGENT FOR
PRE-WASH & WASH
RINSE AID WASH CYCLE DURARTION
(without extra drying)
in minutes
INTENSIVE Very dirty dishes and pans
(NOT to be used for delicate
items)
Pre-wash with hot water at 40 C
Extended wash at 65 C
2 cold rinses
Hot rinse at 65 C
Drying
5 + 25g
*
*
120
72
NORMAL
ECO
Cycle for normally dirty pans and Pre-wash with cold water
dishes.
Standard daily cycle.
Short wash at 55 C - Cold rinse
Hot rinse at 70 C
Drying
5 + 25g
Environmentally friendly cycle,
with low energy consumption
2 cold pre-washes
Extended wash at 45 C
5 + 25g
*
120
levels, suitable for normally dirty Hot rinse at 65 C
pans and dishes.
Drying
FAST
Economic and fast cycle to be
used for slightly dirty dishes.
Short wash at 40 C
Cold rinse or
Run cycle immediately after use. Hot rinse, if the extra drying
Without drying except when the option has been selected.
extra drying option has been
25g
26
12
selected.
PRE-WASH Preliminary wash cycle for dishes Short cold wash to prevent food
while awaiting completion of the from drying onto the dishes.
load with the dishes from the
next meal.
DELICATES Special cycle to be used for
Wash at 50 C
Rrinse at 45 C
more delicate items which are
25g
*
*
96
36
sensitive to high temperatures. Hot rinse at 65 C
Run cycle immediately after use. Drying
SPECIAL
GUEST
Rinse and drying cycle for
dishes that are seldom used
and are only dusty.
Hot rinse at 65 C
Drying
OPTIONAL WASH CYCLE
AUTO DUO Wash differentiated on the two
Cold pre-wash
WASH
racks.
Wash at 50 C
Delicate for glassware and
glasses on the upper rack and
Lukewarm rinse at 45 C
Hot rinse at 65 C
5 + 25g
*
108
heavy duty for the pans on the Drying
lower rack.
To optimise wash performance and save on energy, try to use the dishwasher with a full wash load. If it takes some time to fill your
dishwasher, use the pre-wash to avoid caked on food and build up of bad odours.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
ISHWASHER
D
Before Using your Dishwasher
Topreventrustfromforming,
loadthesaltjustbefore
beginningawashcycle.
Adjusting the water softener.
Water hardness varies according
towhereyoulive. Ifthewaterinyour
homeishard, withoutwatersoften-
ing,incrustationswouldformonyour
dishes. Your dishwasher is fitted
with a water softener which uses
special salt to get rid of limescale in
thewater.
Your dishwasher can adjust its salt
consumptionaccordingtothehard-
nessofthewaterinyourhome. This
way, youcanoptimiseandcustom-
ise your dishwasher's salt con-
sumption.
W aterH ardness
Salt
Autono
co nsu
Clarke
degrees
Selector
position
m y
°fH
m m ol/l
m ption
(gram s/
cycle)
(cycles\2
kg)
0
14
0
17
0 1,7
/
0
/
14 36 18 44 1,8 4,4
36 71 45 89 4,5 8,9
" "
20
40
60
60
40
25
M ED
"+"
To adjust salt consumption, do as
follows:
>71
> 89
> 8,9
1. Unscrew the salt container cap
2. There is an arrow on the neck
of the container (see figure): if
necessary, turn the arrow anti-
clockwise from the "-" setting
to the "+" setting.
Select the arrow position
depending on the water
hardness, referring to the table.
IMPORTANT:
Onlyuserecommendeddishwasher
salt. DO NOT use everyday table
salt, cooking salt, as they containe
insoluablesubstanceswhichcould
harm the dishwasher.
Youdon'tknowhowhardthe
waterinyourhomeis?Ask
thecompanythatsupplies
waterinyourarea.
Salt
Filling the salt container.
When to add salt:
Always use salt which is intended The salt container should be filled
for dishwasher use.
up when the low salt indicator light
The salt container is situated “T” flashes on the control panel.
underneath the lower basket, fill it When you have loaded salt for the
up as follows:
first time, it is normal for the low salt
1.Pull out the lower basket indicatorlighttostayonforatleast5
completely, unscrew and consecutive cycles.
remove the container cap
2. If it is the first time you add the
salt, firstfillthecontainerupwith
water (you won't have to do this
againnexttime)
IMPORTANT NOTICE:
3in1dishwashertabletsarenowavailable. Thesecombinedetergent, salt
andrinseaidALLINONE. Ifthewaterinyourareaishardorveryhard, we
still recommend you add salt to the salt container to prevent white streaks
on your dishes and in the dishwashers interior.
3. Putthedishwasherfunnelonthe
hole and pour in approximately
two kilos of salt. It is normal that
some water comes out of the
container.
Add rinse aid to the dispenser, only if you are dissatisfied with the results.
In all cases, please read the manufacturers instructions on the packet.
Ifyouareonlyusingthe3in1products, afteranumberofcyclesitisnormal
for the salt and rinse aid indicator lights to flash permanently.
4. Screw the cap back in place
carefully.
WARNING:
DO NOT pour detergent into the
specialsaltcontainer.
Thiswilldestroythewatersoftener.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
ISHWASHER
D
Before Using your Dishwasher
The detergent
•
•
Use the right amount of detergent
(seeprogrammechart).
Store your detergent and rinse aid
inacool,dryplace,safelyawayfrom
children.
Eachtimeyouloadthedishwasher,
adddetergergent.Pourdishwasher
detergent into thedispenser on the
insideofthedoor.
Addingdetergent
ToopenlidA, pressbuttonB.
Thedetergentshouldbeputintothe
twocontainersCandD.
If using a tablet, put it in container
"D".
Now you can close the lid: press it
downuntilyouhearitclick.
If it won't close
Check whether there is any
detergent residue on the edges of
thedispenser.Removetheexcess.
We recommend Glist 3 in 1 for use in all Hotpoint dishwashers...
BrilliantcleaningisguaranteedwithGlist3in1.
Hotpoint only recommends Glist 3 in 1 Dishwasher tablets to give outstanding cleaning and
care.
It is important to use detergent specially designed for domestic dishwashers. (Always follow the
manufacturersinstructions.)
Glist3in1 advanceddishwashertabletswithactiveenzymesaretheideal waytoprotectandcarefor
yourdishwasher, whilegettingyourdishesandglassessparkingclean.
*If you live in an area particularly
prone to very hard water ( 35
Glist and Hotpoint recommend
that you continue to keep your
dishwasher salt topped up.
°f)
SofterWater:
Built in salt action softens water, helping to prevent the build up of limescale in the dishwasher and
improvethecleaningresult*.
CleanerDishes:
With unique active enzymes in the cleaning phase Glist 3 in 1 breaks down even the hard to shift
foodstuffsandgrease, leavingthedishesspotlessandthedishwashercleantoo.
SparklingResults:
The built-in Glist rinse agent ensures the dishes and glasses are free from water marks and smears.
If you have any questions regarding Glist3in1, please contact the hotline on 0800 216 730.
Rinse aid.
Rinse aid makes dishes sparkle
moreasitimprovestheirdrying.The
rinseaidcontainerissituatedonthe
insideofthedoor.
Youshouldfilltherinseaidcontainer
when indicator D lights up on the
container (see right) and the rinse
aid indicatorlight "U"onthecontrol
panelflashes.
- The amount of rinse aid
needs to be increased if the
dishes appear dull or you can
see circular stains.
- The amount of rinse aid
needs to be reduced if the
dishes are sticky or you can
see white streaks.
Youcanregulatetheamountof
Addingrinseaid.
rinse aid used by the dishwasher,
To open the dispenser, turn cap C
movetheadjusterFwhichyouwill
findunderlidC.
anticlockwise. Takecarewhenyou
pour in the rinse aid to avoid it
overflowing.
You can choose from six different
positions.
It is normally set to 4.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
ISHWASHER
D
Loading your Dishwasher
First of all.
What goes into the lower
Before placing dishes in the basket?
Load examples
lowerbasket
upperbasket
baskets, remove all course food
remains. This avoids blocking the
filter, which would reduce the
efficiencyofthewash.
If saucepans and frying pans are
verydirty,allowthemtosoakbefore
beingwashed.
Werecommendyouplacethemost
difficultdishestowashintothelower
basket: saucepans, lids, soup
dishes and plates (a load example
isshowninthephoto).
•
Servingdishesandlargelids:
place them on the sides of the
basket.
To make it easier to load your
dishes, pullthebasketsout.
•
•
Saucepans,saladbowls:must
alwaysbeplacedupsidedown
Very deep dishes:placethem
obliquely, thusallowingwaterto
run down them and cleaning
thembetter
Multisystem baskets
Thedishwasherisfittedwithupper,
lower and cutlery baskets. They
providegreaterflexibilityforloading
dishes,makingthemmoresuitable
for your specific needs.
•
Glasses and cups: position
themasshowninloadexample
photo.
The basket handles can be
removed for cleaning. Pull out the
two fastening plugs, remove the
handles and rinse under running
water. Replace the handles fixing
theminplacewiththetwofastening
plugs.
Thecutlerybasketscanbesplitup
by pulling out the handle and
removing the metal clip that keeps
thetwopartsjoinedtogether.
When you only have a little cutlery
to wash you can use just half the
basket, save space for other
crockery or place the other half in
the upper basket instead (see
figuresAandB).
This basket is equipped with two
removablegrids. Cutleryandsharp
utensils should always be inserted
in random order with the blades
pointingdownwards(takecarewith
knifeblades). Positionthemsothat
theydon’ttouch.
What goes into the upper
basket?
Placedelicateandlightweightdishes
in the upper basket: glasses, tea
cupsandcoffeecups, saucersand
plates-shallowsaladbowls, slightly
dirtyfryingpansandshallowpans.
Positionlightweightdishesinsucha
way as to avoid their being moved
by the spray of water.
In this specific model, the cutlery
basketisfittedwithtwodetachable
side compartments, as shown in
figureA1, whichcanbehookedon
eithertheupperorlowerbasketas
required.
The dishwasher can also be
equipped with one or two tip up
compartments onto which you can
place mugs and cups, as well as
long sharp knives and serving
cutlery.
Afterloadingthedishes, remember
to check that the spray arms can
turnfreelywithouthittingagainstany
dishes.
How to adjust the upper
basket.
Theupperbasketcanbesetinhigh
or low position to enable you to
organiseyourdisheseffortlessly.
What can I Wash
Items not suitable for the dishwasher:
•
•
•
Cutleryandtablewaremadefromwoodorpartwood-Theymaybecomefadedandunsightlyinappearance.
Avoidwashinghornhandledandbronzecutleryinthemachine.
Delicate/decorative glassware and vases, special antique or irreplaceable china - the decorative patterns
printedontheseitemswillnotbedishwasherproof.
•
•
•
Plastic objects that are not resistant to hot water.
CopperandPewterutensils. AluminiumandSliverobjects.
Some types of glass can become opaque in appearance after they have been washed too many times in a
dishwasher.
•
•
Highlyabsorbentmaterialssuchasspongesandtowelsshouldneverbeplacedinadishwasher.
If in any doubt, check with the manufacturer on items suitability for dishwasher’s.
WARNING:Dishesorcutlerysoiledwithtobaccoash,wax,lubricatinggreaseorpaintshouldnotbeputinthedishwasher.
Ourrecommendation:Infuture,onlypurchasetableorkitchenwarethathasbeenconfirmed-dishwasherproof.
There are two handles on the sides of
the upper basket, use these to adjust
its height (see fig.C).
11
Download from Www.Somanuals.com. All Manuals Search And Download.
ISHWASHER
D
INFORMATION FOR TEST LABS
Load for 12 Standard Settings tests (upper basket at top position)
3
12
12
B
C
4
A
i
h
1
k
e
e
D
e
2
9
g
A
C
g
f
g
C
g
5
6
9
1
3
lower basket
upper basket
3
2
LOWER BASKET
UPPER BASKET
TYPE
ITEM
DIAMETER / VOLUME
(approximately)
TYPE
ITEM
DIAMETER / VOLUME
(approximately)
A
B
soup dish
23 cm
26 cm
e
f
cup
0.20 l.
19 cm
dinner plate
serving bowl
C
D
dessert plate
oval platter
19 cm
35 cm
g
h
glass
250 ml.
14 cm
saucer
k
j
serving bowl
serving bowl
13 cm
16 cm
Therinseaid
Thereare6differentsettings;thenormaldosagesettingis5.
Loadingthedetergent
Toopenlid"A",pressbutton"B".Thecleaningdetergentshouldbe
introduced intothethreecontainers“1”,“2”and“3”.
(seetablebelow)
8
7
2
5
3
1
6
4
5
5
5
5
5
5
5
5
5
5
5
3
3
3
3
3
5
3
3
3
3
3
3
7
3
4
Thisbasketisequippedwith
7
tworemovablegrids.Cutlery
andsharputensilsshould
always be inserted in
randomorderwiththeblades
pointingdownwards(take
care with knife blades).
Positionthemsothatthey
don’ttouch.
1
1
1
1
1 1
1 1
4
1
1 1
4
1
8
6
4
2
4
4
4
4
4
4
2
2
4
4
2 2 2
2
2
2
2
2 2
Press the “extra dry” button (depending on Model).
Don’t press the “extra dry” button only, for free-standing dishwashers with “turbo-dry” fan, see
features in the ‘Getting to Know Your Dishwasher’ section of this instruction book.
Cycle
Eco wash
Total detergent
30 gr.
Comp.3
Comp.1
Comp.2
25
5
EN 50242
IEC/ DIN
❉
ꢀ Intensive wash
30 gr.
30
12
Download from Www.Somanuals.com. All Manuals Search And Download.
ISHWASHER
D
User Quick Guide
13
Download from Www.Somanuals.com. All Manuals Search And Download.
ISHWASHER
D
Care and Cleaning
DONOTusesolventsorabrasives
tocleantheexteriorandrubberparts
of your appliance, do not use
solvents or abrasive cleaning
products. Use a cloth dampened
withlukewarmsoapywateronly.
Ifthereareanystainsonthesurface
oftheapplianceinterior,useacloth
dampened with water and a little
whitevinegar,oracleaningproduct
specificallymadefordishwashers.
Unplug the appliance.
Cleaning the spray arms.
Goingaway
Beforecarryingoutanycleaningor Food residue may become
maintenance onthedishwasher, encrustedontothesprayarmsand
always remove the plug from the blocktheholeswherewatercomes
Ifthedishwasherisnotgoingtobe
usedforsometime, carryoutthe
following:
electricitysocket.
out.Checkthesprayarmsregularly
andcleanthemonceinawhile.
•run a cycle with the dishwasher
empty.
•switchoffattheelectricalsocket
andunplug.
• turn off the water supply tap,
disconnect the inlet hose and
allowtodrain.
•filltherinseaiddispenser.
•leavethedoorajar,topreventthe
buildupofunpleasantodours
insidethedishwasher.
After every wash.
Whenthewashcyclehasended,
always remember to turn off the
watersupplytapandtoleavethe
appliance door ajar. This way,
moistureandbadodourswillnotbe
trappedinside.
Thefilterassembly
• Ifyouwantconsistentgoodresults
fromyourdishwasher,youneedto
cleanthefilterassembly.
Cleaning the Water Inlet
Filter
Beforeusingthedishwasheraftera
longbreak,pluginandswitchonat
theelectricalsocket.Reconnectthe
inlet hose and turn on the water
supply tap. Check there are no
deposits of rust inside the water
pipe, ifthereareallowwatertorun
from the supply tap for a few
minutes.
Periodicallycleanthewaterinletfilter
(see figure 2 under "Installation")
located on the outlet of the water
supplytap.Afterturningoffthewater
tap, unscrewtheendofthewater
supplyhose, removethefilterand
cleanitcarefullyunderrunningwater.
Then,returnthefiltertoitsplaceand
tightenthewatersupplyhoseback
intoposition.
•Removethelargerfoodparticles
trappedinsidethecup“C”andthe
semi-circular filter A after each
wash;pullthecuphandleupwards
to remove them. Just rinse them
underrunningwater.
•Theentirefilterassemblyshould
becleanedthoroughlyonceamonth:
cup C + semi-circular filter A +
cylindrical filter B. Rotate filter “B”
anticlockwisetoremoveit.
Disconnectingthedishwasher.
Whendisconnectingthedishwasher
itisimportantthattasksarecarried
outinthecorrectsequence.
•switchoffatthemainsandremove
theplugfromthesocket.
•turnoffthewatersupply.
•disconnectdrainandwaterinlet
hose.
For cleaning, use a non metallic Theseals.
brush.
One of the factors that cause
unpleasantodourstoforminsidethe
dishwasher is food that remains
trapped in the seals. Periodic
cleaningusingadampspongewill
preventthisfromoccurring.
1
A
B
2
•pulloutthedishwasher,carefully,
withdrawinghosesatthesame
time.
C
Movingtheappliance.
Reassemble the filter parts (as
showninthefigure)andreinsertthe
whole assembly into the
dishwasher. Position it into its
housingandpressdownwards.
Thedishwasherisnottobeused
withoutfilters.Improperreplacement
of the filters may reduce the
efficiency of the wash and even
damageyourdishwasher.
Drainwaterfromthedishwasher.
Secure all loose parts. Only
transportinanuprightposition.
•Ifnotkeptuprightduringtransport,
anywaterremaininginsidemay
seepintothecontrolmoduleand
causesubsequenterrorswith
programmefunctions.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
ISHWASHER
D
Troubleshooting
Caution
- Do not forget that repairs should be carried out by a qualified specialist. Improper repairs can lead to considerable equipment
damage, as well as danger to the user.
- The dishwasher must first be disconnected from the electricity supply before any repairs or other work can be carried out.
Switch off at the mains socket and water supply and remove the plug.
Resolving minor problems yourself.
Experience has shown that you can resolve most problems that arise during normal daily usage yourself, without having
to call out a service engineer. Not only does this save costs but it also means the appliance is available for use again
that much sooner. The following list of common occurences and their remedies should help you identify the causes of
most problems.
If the dishwasher won't
start, check...
ꢁ Is the dishwasher plugged in at the
electricitysocketandswitchedon?
ꢁ Isthereapowerfailure, checkother
appliances.
If the dishes fail to dry or
remain dirty, check...
ꢁ thereisrinseaidinsidetherinseaid
container.
ꢁ the rinse aid dispenser setting is
correct.
ꢁ thedetergentbeingusedisofgood
quality and has not lost its
effectiveness(forexample, through
incorrect storage, with the box left
open).
Ifafterallthechecks, theappliance
stilldoesnotoperateortheproblem
persists, callHotpointService(see
KEYCONTACTS,backpage)and
informthemof:
Error messages
Yourdishwasherisequippedwithasafety
systemwhichisabletodetectoperating
faults.
These faults flash up on the display by
several codes consisting of letters and
numbers.
Takeanoteofthecodes, turntheappli-
anceoffandcallHotpointServicefortech-
nicalassistance(seebackpage).
-thetypeofproblem
ꢁ Checkthefuse.
-theabbreviationofthemodel name
(Mod.)andtherelativenumbers(S/
N)writtenontheratingplate
located on the inner edge of
the door.
ꢁ Isthewatersupplytapturnedon?
ꢁ Is the water inlet hose connected
properly?
ꢁ Is the pressure of the water supply
sufficient?
ꢁ Istheinlethosekinked?
ꢁ Isthefilteronthewatersupplyhose
blocked?
ꢁ Is the dishwasher door not closed
properly?
If the dishes show signs of
streaking, staining etc.
check...
ꢁ therinseaiddispensersettingisnot
settoohigh.
Tap off alarm
Switch off at the mains socket
and remove the plug. Turn off
the water supply.
IftheH2Ocodeisflashingonthedisplay
withalongseriesofprolongedbeeps, it
meansyouhaveforgottentoturnthewa-
tertapon.
Turnonthewatertapandthedishwasher
willstartafterafewminutes.
IfyouarenottherewhentheH2Ocode
appears,theappliancewillswitchtoalarm
modeandthecodeAL06willflashonthe
display.
Turnthedishwasheroffbykeepingthe
Stand-by button pressed in, check the
watersupplyandturnonthewatertap,
waitapproximately20secondsbeforeturn-
ing appliance back on by pressing the
Stand-bybuttonagain.Repeatyourwash
cycleselectionsandpresstheStartbut-
ton.
If water remains inside the
dishwasher, check...
ꢁ thedrainhoseisnotkinked.
ꢁ thedrainsyphonisnotobstructed.
ꢁ thedishwasherfiltersarenotclogged.
If there are visible traces
of rust inside the tank,
check...
ꢁ the cap off the salt container is
securely closed and that the water
softnersettingiscorrect.
ꢁ the correct amount of detergent is
beingused. Certaindetergentscan
bemorecorrosivethanothers.
ꢁ thetankismadeofsteelandtherefore
any rust marks are due to external
elements(fragmentsofrustfromthe
tankpipes,pots,cutleryetc.)Special
productsarecommerciallyavailable
toremovesuchmarks.
If the dishes are not being
cleaned properly, check...
ꢁ thecorrectamountofdetergenthas
beenadded.
ꢁ there is regenerating salt in the salt
container.
ꢁ thedisheshavebeenloadedcorrectly.
ꢁ theselectedprogrammeissuitable
forthetypeofdishesandthedegree
ofsoiling.
ꢁ all filters are clean and positioned
correctly.
Clogged filter alarm
If the dishwasher is blocked and code
AL05 appears, this means the filter is
clogged.
TurnthedisplayoffbykeepingtheStand-
bybuttonpressedin, followcleaningin-
structioninthe‘CareandCleaning’sec-
tion.
When the filter is back in position, turn
thedishwasherbackon.
Repeatyourwashcycleselectionsand
presstheStartbutton.
...During washing
ꢁ Unusualamountoffoamiscreated:
-Hasthecorrectdetergentbeenused.
ꢁ Dishwasher stops suddenly
duringawashcycle:
ꢁ the spray arm nozzles are not
obstructed.
ꢁ there is nothing obstructing the
rotationofthesprayarms.
-Therehasbeenapowercut.
-Watersupplyhasbeeninterrupted.
ꢁ Knocking sound can be heard
insidethedishwasher:
- A spray arm is knocking against
dishes.
ꢁ Rattlingsoundanbeheardinside
thedishwasher:
Detergent compartment lid
can not be closed, check...
ꢁ hasthecompartmentbeenoverfilled?
ꢁ is the mechanism clogged with
remnantsofdetergent?
Clogged filter alarm
Ifthewaterleakindicatorlight“Q”flashes,
this means the dishwasher has a leak.
Switchoffanddisconnectfromtheelec-
tricitysupply.
Check for leaks in the tap and fill hose
connections.
- Crockery has not been stacked
properly.
ꢁ Knocking sound can be heard
comingfromtheinletvalves:
-Thisiscausedbythewaythewater
pipesarelaidadithasnoeffectupon
thewaythedishwasherfunctions.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
ISHWASHER
D
Notes
16
Download from Www.Somanuals.com. All Manuals Search And Download.
ISHWASHER
D
Notes
17
Download from Www.Somanuals.com. All Manuals Search And Download.
After Sales Service
"No company is better positioned to offer an after sales service on a
Hotpoint appliance than us - the manufacturer"
As part of our commitment to you, all Hotpoint appliances have the added benefit of a fully inclusive
parts and labour guarantee for the first 12 months. In addition to this you also have the advantage of
free replacement parts for the first 5 years when fitted by a Hotpoint engineer. When the 12
months parts and labour guarantee expires we offer the following after sales service options:
Repair Service and Information Help Desk
UK: 08709 066066
Republic of Ireland: 1850 302 200
Note: Our operators will require the Model number and the Serial number of your appliance
Available 364 days a year with a fast, effective and value for money service. We have the largest
white goods repair service in the UK with over 900 of our own fully trained engineers. All repairs
include a parts and labour guarantee for 12 months from the date of the repair.
If you require any information or have any questions about your appliance, our operators are on
hand with help and advice.
All this ensures that you will receive the best available after sales service possible.
Extended Warranties
UK: 08709 088 088
Republic of Ireland: 1850 502 200
Whether you have just one or a number of Hotpoint appliances in your kitchen, we offer two service
cover plans to give you total peace of mind.
ꢀ Repair Protection Plan
-
FREE service repairs for a single Hotpoint appliance during the
period of cover.
ꢀ Kitchen Cover
-
FREE service repairs for all your Hotpoint appliances less than 8
years old.
Genuine Parts and AccessoriesUK: 08709 077 077
Republic of Ireland: (01) 842 6836
A wide range of genuine parts and accessories are available from our hotline or through our web
site.
Genuine parts and accessories, extended warranties and service repairs are all
available on our web-site at:
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Guarantee
"Satisfaction guaranteed or your money back"
We give you a unique 'satisfaction guaranteed' promise - valid for 90 days - after you have
purchased your Hotpoint appliance. If there is a technical problem simply call Hotpoint Repair
for an engineer to call. If the technical problem is not resolved under this guarantee, we will
replace your machine or, if you prefer, give you your money back.
All Hotpoint appliances carry a fully inclusive 12 month parts and labour guarantee as well as free
replacement parts for the first 5 years (except microwaves, selected integrated appliances and
cooker hoods, which have a one year guarantee) provided that they are fitted by a Hotpoint
engineer.
Guarantee terms and conditions
Your guarantee is only applicable in the United Kingdom or Republic of Ireland and is subject to
the following provisions that your appliance:
ꢀ
ꢀ
Has been installed and used correctly in accordance with this instruction booklet.
Has been used solely for domestic purposes and is located on domestic premises (ie. not
for commercial or trade use).
ꢀ
ꢀ
Has been properly connected to a suitable electrical supply voltage as stated on the
appliance rating plate.
Has not been subject to misuse, accident, modified or repaired by anyone other than one of
our own service engineers.
For pre purchase information on any other Hotpoint product call: 08701 50 60 70
Recycling & Disposal Information
As part of Hotpoint's continued commitment to helping the environment, Hotpoint reserves the right
to use quality recycled components to keep down customer costs and minimise material wastage.
Please dispose of packaging and old appliances carefully.
To minimise risk of injury to children, remove the door, plug and cut mains cable off flush with the
appliance. Dispose of these parts separately to ensure that the appliance can no longer be
plugged into a mains socket and the door cannot be locked shut.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Key Contacts
After Sales Service
Over 900 trained specialists, directly employed by us, ensure that you can have complete
confidence in both the appliances and services we offer.
Repair Service and Information Desk
UK: 08709 066 066
(Open 8 to 8 Mon - Fri, 8 to 6 Sat, 10 to 4 Sun & Bank Holidays)
Republic of Ireland: 1850 302 200
Note: Our operators will require the following information:
Model number:
Serial number:
Extended Warranties
UK: 08709 088 088
(Open 8 to 8 Mon - Sun)
Republic of Ireland: 1850 502 200
Genuine Parts and Accessories
UK: 08709 077 077
(Open 8-30 to 5-30 Mon - Fri & 9 to 12 Sat)
Republic of Ireland: (01) 842 6836
General Domestic Appliances Limited, Morley Way, Peterborough, PE2 9JB.
June 2003 Part no. FP199 - 01
Download from Www.Somanuals.com. All Manuals Search And Download.
195039357.00
|