Instructions for Installation and Use
Dishwasher
Model BCI450
Download from Www.Somanuals.com. All Manuals Search And Download.
D ISHWASHER
Contents
Electrical Connection
For Your Safety
3
4
Installation
5
Getting to know your Dishwasher
The Controls
6
6
How to use your Dishwasher
Programme Chart
7
8
Before Using your Dishwasher
Loading your Dishwasher
Care and Cleaning
Troubleshooting
9-10
11
12
13
Information for Test Labs
After Sales Service
Hotpoint Guarantee
Key Contacts
14
15
16
Back Cover
Retention of this Instruction Book
This Instruction Book must be kept handy for reference as it contains important details on the safe and proper use of the
appliance.
If you sell or pass the appliance to someone else, or move house and leave it behind, make sure this Book is also
provided so the new owner can become familiar with the appliance and safety warnings.
If the Book is lost or damaged a copy may be obtained from:
Merloni Elettrodomestici UK Ltd. Morley Way, Peterborough, PE2 9JB.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
D ISHWASHER
Electrical Connection
WARNING:Thisappliancemustbeearthed.
Fuses
Safety Information
Your appliance comes fitted with a plug and a 13A fuse. If you need to
replace the fuse, only those rated at 13A and ASTA approved to
BS1362 should be used. If you lose the fuse cover, a replacement
may be obtained from your local authorised Service Centre or
Electrical company. Correct replacement is identified by colour coding
or the marking on base of plug.
At the time of delivery...
All functions of your dishwasher have been thoroughly tested at the
factory. A small number of water marks may have been left as a
result, they will disappear when the appliance is used for the first time.
WARNING:Thedishwashermustnotbeconnectedtotheelectricity
supply while installation is being carried out.
WARNING: DO NOT use the plug unless the fuse cover is fitted.
-
This appliance should only be connected to a 230/240V AC
source, via a properly installed earthed socket.
Use the dishwasher solely in a domestic environment.
DO NOT stand or place heavy objects on the door when it is
open, this could damage the door or cause the appliance to tip
forward.
Changing the Plug
Cut off and dispose of the supplied plug if it does not fit your socket.
-
-
WARNING:ToavoidashockhazardDONOTinsertthediscardedplug
into a socket anywhere else.
IMPORTANT:WIRESINTHEMAINSLEADARECOLOUREDIN
ACCORDANCEWITHTHEFOLLOWINGCODE:
If your family includes children...
Green/Yellow
Blue
-
-
-
Earth
Neutral
Live
-
DO NOT allow children to play with the appliance or tamper
with its controls.
Brown
-
Keep detergents and rinse aids away from children. Keep
children away from the open door of a dishwasher, there could
still be some detergent left inside.
If you change the plug, the colour of the wires in the mains lead may
not correspond with the terminal markings in the plug, which if not
coloured, could be:
EARTH
NEUTRAL
LIVE
‘E’ or
‘N’
‘L’
CAUTION:
Changing the Mains Lead
The dishwasher meets the requirements set out by the regulations in
force concerning safety and electrical equipment.
Any technical checks should be conducted exclusively by a trained
and authorised technician: Repairs carried out by unaithorised
persons will invalidate the guarantee, as well as posing a potential
hazard to the user.
A lead can be ordered from Hotpoint Service
UK: 08709 066 066 or
Republic of Ireland: 1850 302 220
If you have damaged the existing lead or require a longer one a
charge will be made. It is strongly advised that this work is carried out
by a qualified electrician.
The manufacturer declines all responsibility for damage to persons or
property resulting from failure to observe the above precautions, from
tampering with even a single component or from the use of non-
original spare parts.
If the domestic wiring includes a residual current-operated circuit
breaker, ensure that it conforms to the latest regulations.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
D ISHWASHER
For your Safety
Thismanualformsanintegralpartoftheappliance. Itmustalwaysbekepthandyforreference. Readthroughalltheinstructionscontainedinthismanual
beforeusingthedishwasher.
Installation must be performed by a qualified technician, in compliance
with the regulations in force, including the prevention and elimination of
radio frequency interference.
The dishwasher is designed for washing and drying dishes, any
other use shall be considered improper. The manufacturer declines
all responsibility for uses other than those described above.
1. Seperate the various 7. DO NOT install outdoors, not
packaging materials and
dispose of safely - DO NOT
leave discarded packaging
materialaroundthehome.
even if the area is covered by
a roof: it is extremely
dangeroustoleaveitexposed
torainandthunderstorms.
2. Afterremovingthepackaging, 8. If installed on a carpeted or
check to make sure your
appliance is intact. If in doubt,
covered floor, ensure that the
openingsontheundersideare
notobstructed.
contact
a
qualified
professional.
3. DONOTuse extensionleads
and multiple plugs. If the
9. Do not touch the heating
elementduringorstraightafter
a wash cycle.
electricity supply wire is not 10. Iftheappliancemalfunctions,
long enough, then have it
replacedwithoneofthecorrect
length and remember that it
should be free of bends or
dangerouskinks.
turnoffthewaterinlettapand
disconnecttheplugfromthe
wallsocket. Thenreadthe
sectionentitled
"Troubleshooting". Ifyou
cannotresolvetheproblem,
thencallHotpointService
(seeKEYCONTACTS, back
page).
4. In the event of any damage to
the power cord have it
replaced by a qualified
technician.
5. Themainsplugmustbeeasily
accessibleafterinstallation.
6. Iftheapplianceisnotoperating
properly or if maintenance
operations are necessary,
disconnect the dishwasher
from the mains power supply
(unplugit!).
Theratingplate,featuringthe
technicaldata,serialnumber
andmarkings, isvisibly
positionedontheinneredgeof
thedoor.
DONOTremovetheratingplate.
The dishwasher is intended for use by adults. DO NOT allow children
to come near or play with the controls.
Keep children away from detergents and clear of the dishwasher door
whenopen.
Keep all packaging material away from children.
1. DO NOT use solvents, such as alcohol or turpentine which may
causeanexplosion.
2. DONOTloaddishestowashthataresoiledwithash, waxorpaints.
3. DO NOT lean, sit or stand on any part of the dishwasher - this could
causeinjuryand/ordamagetheappliance.
4. DONOTdrinkanywaterresiduesfrominsidethedishwasher.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
D ISHWASHER
Installation
Choose where you want to install
your dishwasher, you can place it
so that its sides or back panel are
side by side with furniture or up
againstthewall. Thedishwasheris
providedwithwatersupplyanddrain
hoses, which can be directed
towards the left or right to facilitate
appropriateinstallation.
Cold water connection.
Drainhoseconnection.
SinkWasteSystem:
Connect the cold water supply WARNING: Connect your Forundersinkdrainage:
hose, inserting the small filter dishwasher drain hose to pipes Before connecting the drain hose,
supplied with the dishwasher and which connect to the foul drain remove any internal restrictions -
makingsurethatitisfastenedtightly system and not to surface water Thiswillpreventabuildupofdebris
in place (see figure 2). If the water drains.
whichcouldcauseablockage.
hosesareneworhavebeenoutof IMPORTANT: For the correct Remove any restrictions from the
useforanextendedperiodoftime, operation of your dishwasher, it is waste spigot and ensure that the
let the water run to make sure it is essentialtocomplywiththefollowing sealingbungisremoved. Thehose
clear and free of impurities before information:-
making the connection. If this
precaution is not taken, the water Standpipe:
inlet could get blocked, causing Ensurethatthehoseisnotpushed
should be routed, such that it is
raised to a minimum height of
800mm(31/2”).
Levelling.
Once the appliance is positioned,
adjustthefeetbyscrewingthemin
or out depending on how high you
want it and to level it so that it is
horizontal. Make sure that it is not
inclinedmorethan2degrees. Ifthe
applianceislevel, itwill helpensure
itscorrectoperation.
damagetoyourdishwasher.
toofardownthestandpipe.
Iftheendofyourdrainhoseisfitted
with‘retainingflaps’,ensuretheyare
insertedfullyintothestandpipe. This
will prevent the pipe from jumping
outduringinstallationanduse.
NOTE: Ensure the sink outlet
pipe has a minimum diamtere of
32mm.
HeightAdjustment
A
Insert the appliance into the cutout
andthenadjusttheheightusingthe
screwslocatedonthefrontbottom
part of the machine. Use a
screwdriver to turn the screws in
the clockwise or anti-clockwise
direction to increase or decrease
the height respectively.
Fig.2
DO NOT position the standpipe
near an electrical outlet.
ENSUREthatthedrainhoseisnot
kinked and it is routed as shown in
thediagram.
1. Untie the end of the GREY
drainage hose from the rear of
the appliance.
2. Reposition the ‘Hooked End
Support’ as required along the
GREYdrainagehose.
3. If fitting an under sink waste
disposal unit, cut out the
membrane, bung or blanking
plug.
4. Attach the GREY drainage
hose to the under sink waste
disposal unit securely, using the
clip and rubber tube supplied.
Adjusting the back Feet
Insert the appliance into the cutout
andthenadjusttheheightusingthe
screwslocatedonthefrontbottom
part of the machine. Use a
screwdriver to turn the screws in
the clockwise or anti-clockwise
direction to increase or decrease
the height respectively.
The standpipe should have a bore
of at least 38mm (11/2”). It should
be installed as shown, have a trap
fitted and must discharge into the
same drain system as your
householdsink.
It MUST NOT be connected to a
surfacewaterdrain.
Ensure the drain hose is
securely attached, to prevent
it coming away while the
machine is in use and causing
a flood.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
D ISHWASHER
Getting to know your Dishwasher
G
E
E. Upperbasket
F
J. Salt container cap
F. Top spray arm
K. Washingfilter
G. Basketheight adjuster
H
J
L. Detergent and rinse aid
H. Lowerbasket
dispenser
I. Bottom spray arm
K
I
L
The Controls
A. ON-OFF Button
Press this button to switch the
appliance on.
B. ON-OFF Indicator light
This light informs you that the
dishwasher is on.
P. Wash Programme Selector
Each time this button is
pressed,one of the cycle
indicator lights “M” will come on
in sequence.
S
M
B
A
P
M.Cycle indicator light
Thislightinformsyouwhichcycle
you have selected or the one in
progress.
S. Low salt indicator light
This light warns you that it is time
to add more salt.
This dishwasher conforms to
thefollowingEuropean
Technical Characteristics
CommunityDirectives:
7HFKQLFDOꢀFKDUDFWHULVWLFV
•
•
•
73/23/EECof
Width
cm. 44,5
cm. 57
19/02/73(LowVoltage)
andsubsequent
modifications;
Depth
Height
Capacity
cm. 82÷90
89/336/EECof
9 standard place settings
03/05/89(Electromagnetic
Compatibility)and
subsequentmodifications;
97/17/CE
Mains water pressure
Power voltage
Total absorber power
Fuse
4,3 psi -145 psi -30 KPa÷ 1MPa (0,3 ÷10 bar)
See data plate
See data plate
See data plate
(Labelling)
6
Download from Www.Somanuals.com. All Manuals Search And Download.
D ISHWASHER
How to use your Dishwasher
First of all.
- Turn on the water supply
tap completely.
- Add the correct amount of
detergent.
- Load the baskets correctly.
- Check that the spray arms
rotate freely.
Modifying a wash cycle in
progress.
Ifyouhavechosenthewrongcycle
- You can modify the wash cycle in
progress, if it has only just started.
Open the appliance door carefully
to avoid any hot water splashes,
then keep button "P" pressed for
approximately5seconds, untilyou
hear 3 short beeps. Indicator light
"M" will come off and at this point,
all the settings will have been can-
celled. You are now free to re-set
the correct wash cycle.
- Close the door securely.
-Afterperformingalltheoperations
described in the previous para-
graphs, open the appliance door
and press ON-OFF button "A": in-
dicator light "B" comes on. Your
appliance is now on and awaiting
instructions.
You've left out a dish?
Interruptthewashcyclebyopening
the appliance door with the utmost
care, as usual, then insert the dish
you had forgotten. When you shut
the appliance door, the cycle will
startupfromwhereyouinterrupted
it.
Select the wash cycle.
Select the wash cycle by pressing
button "P". Each time this button is
pressed, one of the indicator lights
"M" will come on in sequence, se-
lect the wash cycle most suitable
for the type of dishes to wash (see
‘Programme Chart’).
Closethedoorandafterafewsec-
onds, you will hear a short beep:
the wash cycle has begun.
Cycle end
The end of the wash cycle is indi-
catedbyadoublebeepandtheflash-
ing of the wash cycle indicator light
"M".
Open the dishwasher door, press
the ON-OFF button cutting off the
electricitysupplytotheappliance.
Turn off the water tap.
Wait a few minutes before unload-
ing the dishes: they are very hot! If
youwaitalittlewhile, theydrybetter
due tothesteam.
Empty the lower rack first.
There's been a power
failure or you opened the
dishwasher door
The wash cycle stops and then
restartswhentheelectricitycomes
backonorwhenyouclosethedoor.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
D ISHWASHER
Programme Chart
Select the most suitable programme for the type of dishes and how dirty they are. To select the wash programme see the chart below:
:DVKꢀF\FOH
'HWHUJHQW
IRUꢀSUHꢁ
ZDVKꢀꢂ
ZDV K
GXUDWLRQ
ꢃWROHUDQFH
“ꢄꢅꢆꢇ
&\FOHꢀVHOHFWLRQ
LQVWUXFWLRQV
5LQVH
$LG
&\FOH
&\FOHꢀGHVFULSWLRQ
Pre-wash with hot water at 40°C
Extended wash at 65°C.
2 Rinses with cold water
Rinse with hot water at 65°C.
Drying.
Very dirty dishes and pans
(not to be used for
delicate items)
ꢈꢂꢉꢊꢀJUꢋ
ꢄꢉꢅꢍ
ꢌ
ꢌ
,QWHQVLYH
1RUPDO
Extended wash at 60°C.
Cold Rinse
Rinse with hot water at 70°C.
Drying.
Cycle for normally dirty
pans and dishes. Standard
daily cycle.
ꢉꢎꢀJUꢋ
ꢈꢂꢉꢊꢀJUꢋ
ꢉꢅꢀJUꢋ
ꢏꢈꢍ
ꢄꢊꢐꢍ
ꢊꢅꢍ
Environmentally-friendly
cycle, with low energy
consumption levels,
suitable for normally dirty
pans and dishes.
2 Cold pre-washes
Extended wash at 50°C
Hot rinse at 65°C
Drying
ꢌ
ꢌ
Economic and fast cycle to
be used for slightly dirty
dishes. Run cycle
Short wash at 47°C
Hot rinse at 65°C
Drying
immediately after use.
5DSLGꢀ ꢀ'U\
6RDN
Preliminary wash cycle for
dishes while awaiting
completion of the load
with the dishes from the
next meal.
Short cold wash to prevent food
from drying onto the dishes
ꢄꢉꢀꢍ
To optimise wash performance and save on energy, try yo use the dishwasher with a full wash load. If it takes some time to fill
your dishwasher, use the soak cycle to avoid caked on food and build up of bad odours.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
D ISHWASHER
Topreventrustfromforming,
loadthesaltjustbefore
beginningawashcycle.
Before Using your Dishwasher
Adjusting the water softener.
Your dishwasher can adjust its salt
consumptionaccordingtothehard-
ness of the water in your home.
This way, you can optimise and
customise your dishwasher's salt
consumption.
Water Hardness
Salt
Autono-
consu-
Clarke
Selector
position
my
°fH
mmol/l
mption
(grams/-
cycle)
degrees
(cycles\2-
kg)
To adjust salt consumption, do as
follows:
1. Unscrew the salt container cap
2. There is an arrow on the neck
of the container (see figure): if
necessary, turn the arrow anti-
clockwise from the "-" setting
to the "+" setting.
Select the arrow position
depending on the water
hardness, referring to the table.
0 - 14
0 - 17
0 -1,7
/
0
/
14 - 36 18 - 44 1,8 - 4,4
36 - 71 45 - 89 4,5 - 8,9
"-"
20
40
60
60
40
25
MED
"+"
>71
>89
> 8,9
You don't know how hard
the water in your home
is? Ask the company that
supplies water in your
area.
Salt
Filling the salt container.
Always use salt which is intended
for dishwasher use.
The salt container is situated
underneath the lower basket, fill it
up as follows:
1.Pull out the lower basket
completely, unscrew and
remove the container cap
2. If it is the first time you add the
salt, firstfillthecontainerupwith
water (you won't have to do this
againnexttime)
When to add salt.
The salt container should be filled
up when the low salt indicator light
"S" flashes. Your appliance will re-
mind you to do so for 5 consecu-
tive wash cycles.
3. Putthedishwasherfunnelonthe
hole and pour in approximately
two kilos of salt. It is normal that
some water comes out of the
container.
4. Screw the cap back in place
carefully.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
D ISHWASHER
Before Using your Dishwasher
B
C
D
The detergent
•
•
Use the right amount of
detergent (see programme
chart).
Store your detergent and rinse
aid in a cool, dry place, safely
awayfromchildren.
Addingdetergent
ToopenlidA, pressbuttonB.
Thedetergentshouldbeputintothe
twocontainersCandD.
If using a tablet, put it in container
"D".
24 gr
.
3 gr.
Now you can close the lid: press it
down until you hear it click.
If it won't close
Check whether there is any
detergent residue on the edges of
thedispenser. Removetheexcess.
A
We recommend Glist 3 in 1 for use in all Hotpoint dishwashers...
Brilliant cleaning is guaranteed with Glist 3 in 1.
Hotpoint only recommends Glist 3 in 1 Dishwasher tablets to give outstanding cleaning and care.
Itisimportanttousedetergentspeciallydesignedfordomesticdishwashers. (Alwaysfollowthemanufacturers
instructions.)
Glist 3 in 1 advanced dishwasher tablets with active enzymes are the ideal way to protect and care for your
dishwasher, while getting your dishes and glasses sparking clean.
*If you live in an area particularly
SofterWater:
prone to very hard water ( 35
Glist and Hotpoint recommend
that you continue to keep your
dishwasher salt topped up.
°f)
Built in salt action softens water, helping to prevent the build up of limescale in the dishwasher and improve the
cleaning result*.
CleanerDishes:
WithuniqueactiveenzymesinthecleaningphaseGlist3in1 breaksdowneventhehardtoshiftfoodstuffsand
grease, leaving the dishes spotless and the dishwasher clean too.
SparklingResults:
The built-in Glist rinse agent ensures the dishes and glasses are free from water marks and smears.
If you have any questions regarding Glist 3 in 1, please contact the hotline on 0800 216 730.
Rinse aid.
Rinse aid makes dishes sparkle
moreasitimprovestheirdrying.The
rinseaidcontainerissituatedonthe
inside of the appliance door, you
shouldrefillitwhenlight “D”indicates
thatitisempty.
- The amount of rinse aid
needs to be increased if the
dishes appear dull or you can
see circular stains.
F
C
(If your dishwasher is fitted with a
“low rinse aid” indicator light, fill the
containerupwhentheindicatorlight
flashesorlightsup).
- The amount of rinse aid
needs to be reduced if the
dishes are sticky or you can
see white streaks.
D
Filling the rinse aid container.
To open the dispenser, turn cap C
anticlockwise. Takecarewhenyou
pour in the rinse aid to avoid it
overflowing. You can regulate the
amount of rinse aid used by the
dishwasher, move the adjuster F
whichyouwillfindunderlidC.
Youcanchoosefromsixdifferentpositions.
It is normally set to 4.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
D ISHWASHER
Loading your Dishwasher
What goes into the upper
basket?
Load examples
First of all.
Beforeplacingdishesinthebaskets,
removeallcoursefoodremains.This
avoids blocking the filter, which
would reduce the efficiency of the
wash.
If saucepans and frying pans are
verydirty,allowthemtosoakbefore
beingwashed.
upperbasket
upperbasket
Place delicate and lightweight
dishesintheupperbasket:glasses,
tea cups and coffee cups, saucers
and plates - shallow salad bowls,
slightly dirty frying pans and
shallow pans.
Position lightweight dishes in such
aswayastoavoidtheirbeingmoved
by the spray of water.
Tomakeiteasiertoloadyourdishes,
pullthebasketsout.
How to adjust the upper
basket.
Theupperbasketcanbesetinhigh
or low position to enable you to
organiseyourdisheseffortlessly.
What goes into the lower
basket?
lowerbasket
lowerbasket
Werecommendyouplacethemost
difficultdishestowashintothelower
basket: saucepans, lids, soup
dishes and plates (a load example
isshowninthephoto).
•
Servingdishesandlargelids:
place them on the sides of the
basket.
1
2
•
•
Saucepans,saladbowls:must
alwaysbeplacedupsidedown
Very deep dishes: placethem
obliquely, thusallowingwaterto
run down them and cleaning
thembetter
3
Fig.F
4
Thecutlerybasket
Open the rail stop flaps and pull
the basket out completely. Now
place it in high or low position,
then slide it along the guide rails
until the front wheels also go in.
Now close the rail stop flaps.
Follow the sequence of actions
illustrated in figure "F".
Knives and utensils with sharp
bladesortipsshouldbepositioned
with the sharp parts at the bottom.
Position all cutlery items so that
theydon'ttouch..
if the basket is the one with side
inserts, then insert the tea spoons
one by one into the slots (see figu-
re A).
Itisbestifyouplacelongerutensils
horizontallyatthefrontoftheupper
basket.
Afterloadingthedishes, remember
to check that the spray arms can
turnfreelywithouthittingagainstany
dishes.
What can I Wash
Items not suitable for the dishwasher:
•
•
•
Cutleryandtablewaremadefromwoodorpartwood-Theymaybecomefadedandunsightlyinappearance.
Avoidwashinghornhandledandbronzecutleryinthemachine.
Delicate/decorative glassware and vases, special antique or irreplaceable china - the decorative patterns
printedontheseitemswillnotbedishwasherproof.
•
•
•
Plastic objects that are not resistant to hot water.
CopperandPewterutensils. AluminiumandSliverobjects.
Some types of glass can become opaque in appearance after they have been washed too many times in a
dishwasher.
•
•
Highlyabsorbentmaterialssuchasspongesandtowelsshouldneverbeplacedinadishwasher.
If in any doubt, check with the manufacturer on items suitability for dishwasher’s.
Fig. A
WARNING:Dishesorcutlerysoiledwithtobaccoash, wax, lubricatinggreaseorpaintshouldnotbeput
inthedishwasher.
Ourrecommendation:Infuture,onlypurchasetableorkitchenwarethathasbeenconfirmed-dishwasherproof.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
D ISHWASHER
Care and Cleaning
DONOTusesolventsorabrasives
to clean the exterior and rubber
parts of your appliance, do not use
solvents or abrasive cleaning
products. Use a cloth dampened
with lukewarm soapy water only.
Ifthereareanystainsonthesurface
oftheapplianceinterior, useacloth
dampened with water and a little
whitevinegar, oracleaningproduct
specificallymadefordishwashers.
Unplug the appliance.
Beforecarryingoutanycleaningor
maintenance on the dishwasher,
always remove the plug from the
electricity socket.
Goingaway
Cleaning the spray arms.
Food residue may become
encrustedontothesprayarmsand
blocktheholeswherewatercomes
out. Checkthesprayarmsregularly
and clean them once in a while.
Ifthedishwasherisnotgoingtobe
usedforsometime, carryoutthe
following:
• run a cycle with the dishwasher
empty.
• switchoffattheelectricalsocket
andunplug.
• turn off the water supply tap,
disconnect the inlet hose and
allowtodrain.
•filltherinseaiddispenser.
•leavethedoorajar,topreventthe
buildupofunpleasantodours
insidethedishwasher.
After every wash.
When the wash cycle has ended,
always remember to turn off the
water supply tap and to leave the
appliance door ajar. This way,
moisture and bad odours will not
betrappedinside.
The filter assembly
• Ifyouwantconsistentgoodresults
fromyourdishwasher, youneedto
clean the filter assembly.
• Remove the larger food particles
trapped inside the cup “C” and the
semi-circular filter A after each
wash;pullthecuphandleupwards
to remove them. Just rinse them
underrunningwater.
• The entire filter assembly should
be cleaned thoroughly once a
month: cup C + semi-circular filter
A + cylindrical filter B. Rotate filter
“B” anticlockwise to remove it.
For cleaning, use a non metallic
brush.
Before using the dishwasher after
alongbreak, pluginandswitchon
attheelectricalsocket. Reconnect
theinlethoseandturnonthewater
supply tap. Check there are no
deposits of rust inside the water
pipe, if there are allow water to run
from the supply tap for a few
minutes.
Cleaning the Water Inlet
Filter
Periodically clean the water inlet
filter (see figure 2 under
"Installation") located on the outlet
ofthewatersupplytap.Afterturning
off the water tap, unscrew the end
of the water supply hose, remove
thefilterandcleanitcarefullyunder
runningwater. Then, returnthefilter
to its place and tighten the water
supply hose back into position.
Disconnectingthedishwasher.
When disconnecting the
dishwasheritisimportantthattasks
are carried out in the correct
sequence.
•switchoffatthemainsandremove
the plug from the socket.
• turn off the water supply.
• disconnect drain and water inlet
hose.
Theseals.
One of the factors that cause
unpleasant odours to form inside
thedishwasherisfoodthatremains
trapped in the seals. Periodic
cleaning using a damp sponge will
prevent this from occurring.
1
A
B
2
•pulloutthedishwasher, carefully,
withdrawinghosesatthesame
time.
C
Movingtheappliance.
Drain water from the dishwasher.
Secure all loose parts. Only
transport in an upright position.
•Ifnotkeptuprightduringtransport,
anywaterremaininginsidemay
seepintothecontrolmoduleand
cause subsequent errors with
programmefunctions.
Reassemble the filter parts (as
shown in the figure) and reinsert
the whole assembly into the
dishwasher. Position it into its
housingandpressdownwards.
The dishwasher is not to be used
without filters. Improper
replacement of the filters may re-
ducetheefficiencyofthewashand
evendamageyourdishwasher.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
D ISHWASHER
Troubleshooting
Caution
- Do not forget that repairs should only be carried out by a qualified specialist. Improper repairs can lead to considerable
equipment damage, as well as danger to the user.
- The dishwasher must first be disconnected from the electricity supply before any repairs or other work can be carried out.
Switch off at the mains socket and water supply and remove the plug.
Resolving minor problems yourself.
Experience has shown that you can resolve most problems that arise during normal daily usage yourself, without having
to call out a service engineer. Not only does this save costs but it also means the appliance is available for use again
that much sooner. The following list of common occurences and their remedies should help you identify the causes of
most problems.
If the dishwasher won't
start, check...
■ Isthedishwasherpluggedinat
the electricity socket and
switchedon?
■ Isthereapowerfailure, check
otherappliances.
■ Checkthefuse.
■ Is the water supply tap turned
on?
■ Isthewaterinlethoseconnected
properly?
■ Is the pressure of the water
supplysufficient?
If the dishes fail to dry or
remain dirty, check...
■ thereisrinseaidinsidetherinse
aidcontainer.
■ therinseaiddispensersettingis
correct.
■ the detergent being used is of
goodqualityandhasnotlostits
effectiveness (for example,
throughincorrectstorage, with
theboxleftopen).
turn it back on. Repeat the
programming operations and the
selected wash cycle will start up
again.
Error messages
Your dishwasher is equipped with
a safety system which is able to
detectoperatingfaults.
Thesefaultsarereportedbyoneor
two cycle indicator lights "M" flash-
ing rapidly. Take a note of which
lights are flashing, turn the appli-
ance off and call Hotpoint Service
for technical assistance.
Waterloadsolenoidvalve
malfunctionalarm.
If indicator light 3 (eco cycle)
flashes rapidly, turn the
dishwasher off and back on again
after one minute. If the alarm
persists, first turn off the water tap
to avoid any flooding and then cut
off the electricity supply and call
for technical assistance.
If the dishes show signs of
streaking, staining etc.
check...
Tap off alarm
Ifyouhaveforgottentoturnthewa-
ter tap on, your appliance will re-
mind you of this by sounding a few
shortbeepsforafewminutes. Turn
the tap on and your appliance will
start up again after a few minutes.
Wereyoutobeabsentwhenthese
beeps are sounded, the appliance
will be blocked automatically and
cycle 3 and 4 indicator lights (eco
and rapid&dry cycle) will flash rap-
idly. Turn the appliance off at the
ON-OFF button, turn on the water
tapandwaitapproximately20sec-
onds before turning the appliance
back on.
■ Istheinlethosekinked?
■ Isthefilteronthewatersupply
hoseblocked?
■ Isthedishwasherdoornotclosed
properly?
■ therinseaiddispensersettingis
notsettoohigh.
If after all the checks, the appli-
ance still does not operate or the
problem persists, call Hotpoint
Service (see KEY CONTACTS,
backpage)andinformthemof:
- the type of problem
- the abbreviation of the model
name(Mod.)andtherelativenum-
bers(S/N)writtenontheratingplate
located on the inner edge of the
door.
If there are visible traces
of rust inside the tank,
check...
■ thecapoffthesaltcontaineris
securely closed and that the
watersoftnersettingiscorrect.
■ thecorrectamountofdetergent
isbeingused.Certaindetergents
can be more corrosive than
others.
■ the tank is made of steel and
thereforeanyrustmarksaredue
toexternalelements(fragments
ofrustfromthetankpipes,pots,
cutleryetc.)Specialproductsare
commerciallyavailabletoremove
suchmarks.
If water remains inside the
dishwasher, check...
■ thedrainhoseisnotkinked.
■ the drain syphon is not
obstructed.
■ the dishwasher filters are not
clogged.
If the dishes are not being
cleaned properly, check...
■ thecorrectamountofdetergent
hasbeenadded.
■ thereisregeneratingsaltinthe
saltcontainer.
■ the dishes have been loaded
correctly.
■ the selected programme is
suitableforthetypeofdishesand
thedegreeofsoiling.
■ allfiltersarecleanandpositioned
correctly.
■ the spray arm nozzles are not
obstructed.
■ thereisnothingobstructingthe
rotationofthesprayarms.
Switch off at the mains
socket and remove the plug.
Turn off the water supply.
Re-select the wash cycle and the
appliance will start up again.
Cloggedfilteralarm
If the appliance is blocked and
indicator lights 2 (Normal) and 4
(Rapid & dry) flash rapidly, this
meansthefilterisclogged bylarge
particles of food residue. Turn the
appliance off, clean the filter
thoroughly and reposition it in its
seatasillustratedonpage12. Then
13
Download from Www.Somanuals.com. All Manuals Search And Download.
D ISHWASHER
INFORMATION FOR TEST LABS
Load for 9 Standard Settings tests (upper rack at lower position)
lower basket
upper basket
1
1
1
6
8
1
D
A
4
C
9
3
i
2
h
h
k
e
g
B
9
C
f
e
e
g
6
3
1
3
L o w e r b a s k e t
U p p e r b a s k e t
Typ e
Ite m
D ia m e te r Vo lu m
(a p p rox im a te ly)
Ty p e
Ite m
D ia m e te r/Vo lu m
(a p p roxim a te ly )
so u p e p la te
d in n e r p la te
2 3 c m .
2 6 c m .
cu p
0 ,2 0 l.
1 9 c m .
A
B
e
f
s e rv in g
b ow l
d e ss e rt
p la te
1 9 cm .
g la ss
2 5 0 m l.
C
g
ova l p la tte r
3 5 cm .
1 4 cm .
s a u ce r
1 4 c m .
1 3 c m .
D
h
h
k
s e rv in g
b ow l
s a u c e r
s e rv in g
b ow l
1 6 c m .
i
Loading the Rinse Aid
Loading the detergent
Theamountofrinseaidusedforeachcyclecanberegulatedbyturning
thedoseadjuster‘F’whichyouwillfindunderlid‘C’.Thereare6different
settings; the normal dosage is setting 5.
The cleaning detergent should be introduced into the two containers
“Comp.2” and “Comp.3 (see table at the end of the page).
D
Comp.2
Comp.3
F
8
7
2
5
3
1
6
4
3
6
5 5
4
5
7
2
If the cutlery basket
isequippedwithtwo
removable grids:
insertthecutleryone
byoneintotheslots,
with the handles at
the bottom. Position
them so that they
don'ttouch.
2
2
2
2
2
4
4
3
5
5
3
4
3
3
3
C
1
1
4
2
2
5
1
1
1
3
4
3
4
3
4
1
4
8
1
1
7
5
Total detergent
Comp.2
Comp.3
Cycle
1
5
5
2
27 gr.
EN 50242
IEC/ DIN
24
27
Eco
3
door side
Eco+extra dry
27 gr.
*
Press the “extra dry” button, if existing.
*
14
Download from Www.Somanuals.com. All Manuals Search And Download.
After Sales Service
"No company is better positioned to offer an after sales service on a
Hotpoint appliance than us - the manufacturer"
As part of our commitment to you, all Hotpoint appliances have the added benefit of a fully inclusive
parts and labour guarantee for the first 12 months. In addition to this you also have the advantage of
free
replacement parts for the first 5 years when fitted by a Hotpoint
engineer. When the 12 months parts and labour guarantee expires we offer the following after sales
service options:
Repair Service and Information Help Desk
UK: 08709 066066
Republic of Ireland: 1850 302 200
Note: Our operators will require the Model number and the Serial number of your appliance
Available 364 days a year with a fast, effective and value for money service. We have the largest
white goods repair service in the UK with over 1200 of our own fully trained engineers. All repairs
include a parts and labour guarantee for 12 months from the date of the repair.
If you require any information or have any questions about your appliance, our operators are on
hand with help and advice.
All this ensures that you will receive the best available after sales service possible.
Extended Warranties
UK: 08709 088 088
Republic of Ireland: 1850 502 200
Whether you have just one or a number of Hotpoint appliances in your kitchen, we offer two service
cover plans to give you total peace of mind.
l Repair Protection Plan
-
FREE service repairs for a single Hotpoint appliance during the
period of cover.
l Kitchen Cover
-
FREE service repairs for all your Hotpoint appliances less than 8
years old.
Genuine Parts and AccessoriesUK: 08709 077 077
Republic of Ireland: (01) 842 6836
A wide range of genuine parts and accessories are available from our hotline or through our web
site.
Genuine parts and accessories, extended warranties and service repairs are all
available on our web-site at:
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Guarantee
"Satisfaction guaranteed or your money back"
We give you a unique 'satisfaction guaranteed' promise - valid for 90 days - after you have
purchased your Hotpoint appliance. If there is a technical problem simply call Hotpoint Repair
for an engineer to call. If the technical problem is not resolved under this guarantee, we will
replace your machine or, if you prefer, give you your money back.
All Hotpoint appliances carry a fully inclusive 12 month parts and labour guarantee as well as free
replacement parts for the first 5 years (except microwaves, selected integrated appliances and
cooker hoods, which have a one year guarantee) provided that they are fitted by a Hotpoint
engineer.
Guarantee terms and conditions
Your guarantee is only applicable in the United Kingdom or Republic of Ireland and is subject to
the following provisions that your appliance:
l
Has been installed and used correctly in accordance with this instruction booklet.
l
Has been used solely for domestic purposes and is located on domestic premises (ie. not
for commercial or trade use).
Has been properly connected to a suitable electrical supply voltage as stated on the
appliance rating plate.
l
l
Has not been subject to misuse, accident, modified or repaired by anyone other than one of
our own service engineers.
For pre purchase information on any other Hotpoint product call: 08701 50 60 70
Recycling & Disposal Information
As part of Hotpoint's continued commitment to helping the environment, Hotpoint reserves the right
to use quality recycled components to keep down customer costs and minimise material wastage.
Please dispose of packaging and old appliances carefully.
To minimise risk of injury to children, remove the door, plug and cut mains cable off flush with the
appliance. Dispose of these parts separately to ensure that the appliance can no longer be
plugged into a mains socket and the door cannot be locked shut.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Key Contacts
After Sales Service
Over 1200 trained specialists, directly employed by us, ensure that you can have complete confidence in
both the appliances and services we offer.
Repair Service and Information Desk
UK: 08709 066 066
(Open 8 to 8 Mon - Fri, 8 to 6 Sat, 10 to 4 Sun & Bank Holidays)
Republic of Ireland: 1850 302 200
Note: Our operators will require the following information:
Model number:
Serial number:
Extended Warranties
UK: 08709 088 088
(Open 8 to 8 Mon - Sun)
Republic of Ireland: 1850 502 200
Genuine Parts and Accessories
UK: 08709 077 077
(Open 8-30 to 5-30 Mon - Fri & 9 to 12 Sat)
Republic of Ireland: (01) 842 6836
Merloni Elettrodomestici UK Ltd. Morley Way, Peterborough, PE2 9JB.
P04/195042366.01
Download from Www.Somanuals.com. All Manuals Search And Download.
|