Instructions for Installation and Use
Electric Hobs
Models E6011-E6014
To the Installer
Before installation fill in the product details on the back cover of this book.
The information can be found on the rating plate.
To the User
You must read the instructions prior to installing and using the appliance and
then retain them for future reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Your new hob is guaranteed* and will give lasting service. This guarantee is only applicable if the appliance has been
installed in accordance with the installation instructions detailed in this booklet.
To help make best use of your cooking equipment, please read this booklet carefully.
The hob is designed specifically for domestic use and responsibility will not be accepted for use in any other installation.
*The guarantee is subject to the provisions that the appliance:
(a) Has been used solely in accordance with this booklet.
(b) Has been properly connected to a suitable supply voltage as stated on the rating plate, attached to the
appliance.
(c) Has not been subjected to misuse or accident or been modified or repaired by any person other than the
manufacturers authorised employee or agent.
(d) Has been correctly installed.
This appliance conforms with the following European Economic Community directives:
-
-
-
-
73/23/EEC of 19/02/73 (LowVoltage) and subsequent modifications;
89/336/EEC of 03/05/89 (Electromagnetic Compatibility) and subsequent modifications;
90/396/EEC of 29/06/90 (Gas) and subsequent modifications;
93/68/EEC of 22/07/93 and subsequent modifications.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Advice and recommendations
•
This appliance was designed for non-professional,
•
Certain fundamental rules must be followed when us-
household use.
ing electrical appliances. The following are of particular
importance:
•
Before using the appliance, read the instructions in the
owner’s manual carefully since it contains all the instruc-
tions you require to ensure safe installation, use and main-
tenance. Keep this owner’s manual in a safe place for fu-
ture reference.
•
•
•
•
do not touch the appliance with wet or damp hands,
never use the appliance when barefoot,
never use extensions,
never pull on the power supply cable or the appli-
•
When you have removed the packing, check whether
ance itself to unplug it from the mains socket,
never leave the appliance exposed to atmospheric
agents (rain, sun, etc.),
• do not allow children or persons who are not famil-
the appliance is intact. If you have any doubts, contact a
qualified professional before using the appliance.
•
•
Never leave the packing components (plastic bags,
polystyrene foam, nails, etc.) within the reach of children
since these are a source of potential danger.
iar with the appliance to use it without supervision.
Always unplug the appliance from the mains or switch
•
•
The appliance must be installed by a qualified techni-
off the main switch before cleaning or performing any
cleaning or maintenance operations.
cian in compliance with the instructions provided by the
manufacturer.
•
If the surface of the glass cracks, unplug the ap-
•
The latter denies all responsibility for improper instal-
pliance immediately.For any repairs, contact only an au-
thorised after-sales service centre and demand original
spare parts. Failure to comply with the above may com-
promise the safety of the appliance.
lation which may harm persons and animals and damage
property.
•
The electrical safety of this appliance can only be guar-
anteed if the latter is correctly and efficiently earthed, in
compliance with regulations on electrical safety. Always
ensure that this vital safety measure has been taken. If
you have any doubts, call in a qualified technician to check
the electrical system thoroughly.
•
Cut the power supply cable after disconnecting it from
the power mains when you decide not to use the appli-
ance any longer.Also make all potentially dangerous parts
of the appliance safe, above all for children who could
play with the appliance.
•
The manufacturer denies all responsibility for damage
•
The glass ceramic hob is resistant to thermal and me-
resulting from a system which has not been earthed cor-
rectly.
chanical shocks. However, it may break due to a shock
caused by a sharp object, such as a tool for example.
In this case, unplug the appliance immediately and
contact an authorised after-sales service centre to
have it repaired.
•
Before powering the appliance, check whether the tech-
nical characteristics featured on the appliance data plate
correspond with those of the mains electrical system.
•
Check that the current load of the mains supply and of
•
Remember that the heating area stays hot for at least
the power sockets is suitable for the maximum power of
the appliance, indicated on the appliance data plate. If in
doubt, contact a qualified professional.
half an hour after being turned off; please refrain from
placing any cookware or other items on the cooking zone
while still hot.
•
This appliance must only be used for the purpose for
•
Do not turn on the heating zones if aluminium foil or
plastic items have been placed on the hob surface.
Do not go near the heating zones when these are still
hot.
which it was expressly designed. Any other use (such as
heating a room for example) is considered to be improper
and consequently dangerous.
•
•
The manufacturer denies all responsibility for damage
•
If you use small electric appliances near the hob, make
resulting from improper or incorrect use of the appliance.
sure their power supply cable does not come into contact
with the hot parts of the hob.
•
Make sure all pan handles are always pointing inwards
towards the centre of the hob to prevent any accidental
spills.
First use: the glue used on the hob seals may leave greasy traces on the glass surface.We recommend you wipe these
off before using the appliance, with the aid of a non abrasive cleaner. During the first few hours of use, you may detect
a smell of rubber, which will disappear quickly.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and fastening
The following instructions are intended for a qualified fitter
Fastening
to guide him/her along the installation, adjustment and tech-
nical maintenance procedures as correctly as possible and
in full compliance with the applicable norms in force.
Important : unplug the hob before all operations.
Very important: It is vital that you ensure the glass ce-
ramic hob is built into a perfectly flat supporting surface.
Deformations due to improper fastening could alter the
characteristics of the hob and compromise its perform-
ance.
Installation
The fastening springs are fastened by screws (see dia-
gram).
It is vital that these screws be kept accessible at all
times.
Insert the hob into the cut-out slot, applying pressure all
along the perimeter of the hob frame so that the latter
adheres fully to the worktop.
•
This hob can be built into a worktop simply by cut-
ting out the corresponding slot.
The worktop must be made with a material designed
to withstand a temperature of approximately 100°C.
The hob should be positioned at least 40 mm (for
•
•
mod:KBM 6011DH - KBM 6001 H the hob should be
positioned at least 55 mm) away from the back wall or
any other vertical surface in order to allow for correct
ventilation and to prevent the surfaces around the ap-
pliance from overheating.
REAR SPRING ASSEMBLY
•
If you wish to install the hob on top of an oven, the
latter must be fitted with a cooling fan.
Try to avoid installing the hob on top of a dishwasher;
FRONT OF HOB
KITCHEN
WORKTOP
•
if this is unavoidable, place a watertight separating el-
ement between the two appliances.
504
Distance to
keep between the
cut-out slot and
the cabinet
HOB FROM BELOW
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Electrical connection
•
The electrical safety of this appliance can only be
guaranteed if the latter is correctly and efficiently
earthed, in compliance with regulations on electrical
safety.Always ensure that this vital safety measure has
been taken. If you have any doubts, call in a qualified
technician to check the electrical system thoroughly.
Voltage
Frequency
Fuses
Sections
Electrical connections
1
2
3
4
5
25 A*
2.5 mm²
230V-1+N~50 Hz
L
N
* Application of the simultaneity coefficient in accordance with
IEC 60335-2-6 norm
•
The manufacturer denies all responsibility for dam-
age resulting from a system which has not been
earthed correctly.
•
Before powering the appliance, check whether the
In the event of an incorrect connection:
technical characteristics featured on the appliance data
plate correspond with those of the mains electrical sys-
tem.
•
•
•
•
if your appliance does not work,
check the position of the wires in the terminal board,
check that all screws are tight,
•
Check that the current load of the mains supply and
check the positioning of the jumpers.
of the power sockets is suitable for the maximum power
of the appliance, indicated on the appliance data plate.
If in doubt, contact a qualified professional.
Disconnect the appliance from the electricity supply
before all operations.
This appliance conforms with the following European
Community Directives:
-
-
-
73/23/EEC of 19/02/73 (LowVoltage) and subsequent
amendments;
89/336/EEC of 03/05/89 (Electromagnetic
compatibility) and subsequent amendments;
93/68/EEC of 22/07/93 and subsequent amendments;
You may connect your hob to the electrical system in two
different ways:
•
by means of a junction box: if the appliance is
connected permanently to the mains, an omnipolar
circuit breaker, accessible if necessary, with a mini-
mum contact opening of 3 mm should be installed.
Warning: If the hob is fitted above a built-in oven, the hob
and the oven must be connected to the mains separately for
safety reasons and to simplify operations when it is necessary
to pull the oven out for some reason.
•
by means of a socket conforming to the regulations
in force in the country where the appliance is fitted. It
should be accessible whenever necessary; do not use
adaptors, multiple plugs or extensions.
Important
After connecting the appliance to the flexible cable, tighten
all the screws on the terminal board. Make sure jumpers
are installed according to the type of mains system as
indicated in the table.
For example: line 1 in the table
Jumper
Phase
Neutral
Earth
(brown) (blue)
(green/yellow)
6
Download from Www.Somanuals.com. All Manuals Search And Download.
description
HOBS
E6014X
Power Diameter
E6011X
Diameter
Power
(in W)
Cooking zones
(in W)
RD 750/2300
R 1200
(in mm)
210
(in mm)
230
H 2500
Back left
Front left
140
R 1200
140
R 1400
R 1800
160
180
R 1400
H 700/1700
160
180
Back right
Front right
Overall power
6700
6800
H = halogen, R = simple radiant, RD = dual radiant
Description of the cooktop and cooking zone
A Cooking areas
B “ON” indicator light
C Control Knobs
D Residual heat indicator light
Super
P
o
w
e
r
A
A
B
0
12
1
11
2
10
3
9
4
8
5
7
6
0
0
0
12
1
11
2
10
3
9
4
8
5
7
6
C
A
12
1
11
2
10
3
A
9
4
D
8
5
7
6
12
1
11
2
10
3
9
4
8
5
7
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.
The different functions of the hob
Description of the heating elements
The control knobs
The heating elements are circular in shape and turn red
in colour only 20-30 seconds after they have been turned
on.
Each cooking area is equipped with a control knob to regu-
late the temperature at any time from a minimum of 1 to a
maximum of 12. The table 1 provides information on the
settings indicated on the knobs and the corresponding,
recommended uses.
The “ ON”indicator light (B)
This light comes on when one of the heating elements has
been turned on.
Combined halogen and electrical heating elements.
The cooktop utilises heating elements which are made up
of two halogen lamps and a circular heating element.This
combination provides ideal heat distribution across the
entire surface of the cooking area without compromising
the advantages of the halogen lamps.The main character-
istic of halogen lamps is that they produce an instantane-
ous emission of a large quantity of light and heat, which
means:
Residual heat indicator light (D)
This light indicates that the temperature of one or more
cooking areas is above 60°C, even thought the elements
have been turned off. Some models come equipped with
four such indicator lights, one for each of the four cooking
areas.
• a rapid source of heat similar to that provided by gas
burners;
• an equally rapid elimination of the heat source.
Halogen lamps are extremely easy to use and their opera-
tion is similar to that of other heating elements. Please
refer to the table 1.
Table 1
Pos Cooking zone setting
0
off
to melt butter or chocolate
1
2
to heat liquids
3
4
for creams and sauces
stews - blanquette - desserts
pasta - rice
5
6
7
8
9
10
11
steak - fish - omelette
12 fried food
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance and care
Hob care
Advice on using your appliance
The vitroceramic glass used for the heating surface is
smooth and poreless and it is also resistant to thermal
shocks and to mechanical shocks under normal condi-
tions of use. In order to preserve these properties, we
recommend you care for your hob as follows:
To get the best from your hob, it is vital that you follow a
few fundamental rules during cooking and when prepar-
ing food.
• Use pans with a flat bottom so they adhere fully to the
heating zone.
•
for ordinary maintenance, just wipe it with a damp
sponge and dry it thoroughly using paper towels.
If the hob is dirty, rub clean using a special cleaner
•
suitable for vitroceramic glass, rinse off and dry thor-
oughly.
•
food residue and dirt can be removed using a spe-
• Always use pans whose diameter covers the cooking
cial scraper. Do this as soon as possible, do not wait
for the hob to cool down in order to avoid incrustations.
For excellent results, use a special stainless steel wool
pad for vitroceramic glass cleaning soaked in soapy
water.
zone fully so that all the available heat can be used.
•
When the hob is clean, you can apply a special
product for the care and protection of the same: this
type of product leaves an invisible film on the surface
of the hob to protect the same against any spills and
boiled-over food. It is best if you do this when the hob
is lukewarm or cold.
• Make sure the pan base is always clean and dry, to
guarantee good contact and long life for the cooking
zones and pans alike.
• Avoid using pans used normally on gas burners. The
concentration of heat on gas burners can warp the
bottom of the pan, consequently you would never obtain
the desired result when using the pan on the glass
ceramic hob.
•
Make sure you always rinse the hob with clean wa-
ter and dry it thoroughly: otherwise the cleaning prod-
ucts could become encrusted onto the hob during sub-
sequent cooking.
• Never leave a cooking zone on without a pan on it as
the maximum heat level would be reached very quickly,
which could damage the heating elements.
Recommendations
•
Never use abrasive or corrosive substances,
• The glass ceramic hob is resistant to thermal and
mechanical shocks. However, it may break due to a
shock caused by a sharp object. In this case, unplug
the appliance immediately and contact an authorised
after-sales service centre to have it repaired.
such as aerosol cleaners for grills and ovens, stain
removers or rust removers, scouring powders and abra-
sive sponges:even the delicate ones could scratch the
hob surface irreversibly.
•
We recommend you keep all items which could melt
away from the hob, such as plastic utensils, sugar
or products with a high sugar content. Should liq-
uid boil over onto the hob surface, remove it immedi-
ately (while the hob is still hot) using a razor blade
scraper, in order to avoid damaging the surface.
Always keep your hob clean.Before proceeding with main-
tenance operations, check that all the cooking zones are
turned off and have cooled down completely.
Stainless steel frame (only on some models)
•
Use this hob exclusively for cooking. Do not
Stainless steel can stain as an effect of enduring contact
with limescale in water or as an effect of highly aggres-
sive detergents (containing phosphorus).We recommend
you rinse and dry it thoroughly after maintenance. It is
preferable to remove any water spills immediately.
place items on the hob when the same is not in use.
Do not use the hob as a work surface (by placing lids,
saucepans or dishcloths on it, for example), nor as a
chopping board.
•
Never leave aluminium wrappers, aluminium foil and
plastic cookware on the hob when hot or still warm.
Do not use steam cleaners or high pressure clean-
ers to clean your appliance.
Do not place metal items on the hob (such as knives,
spoons, lids, etc.).
Never heat up unopened tins: they could burst.
•
•
•
The guarantee does not cover damage to the hob caused
by incorrect use.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
After Sales Service
"No company is better positioned to offer an after sales service on a
Hotpoint appliance than us - the manufacturer"
As part of our commitment to you, all Hotpoint appliances have the added benefit of a fully inclusive parts
and labour guarantee for the first 12 months. In addition to this you also have the advantage of free
replacement parts for the first 5 years when fitted by a Hotpoint
engineer. When the 12 months parts and labour guarantee expires we offer the following after sales
service options:
Repair Service and Information Help Desk
UK: 08709 066066
Republic of Ireland: 1850 302 200
Note: Our operators will require the Model number and the Serial number of your appliance
Available 364 days a year with a fast, effective and value for money service. We have the largest white
goods repair service in the UK with over 1000 of our own fully trained engineers. All repairs include a
parts and labour guarantee for 12 months from the date of the repair.
If you require any information or have any questions about your appliance, our operators are on hand with
help and advice.
All this ensures that you will receive the best available after sales service possible.
Extended Warranties
UK: 08709 088 088
Republic of Ireland: 1850 502 200
Whether you have just one or a number of Hotpoint appliances in your kitchen, we offer two service cover
plans to give you total peace of mind.
l Repair Protection Plan
-
FREE service repairs for a single Hotpoint appliance during the period
of cover.
l Kitchen Cover
-
FREE service repairs for all your Hotpoint appliances less than 8
years old.
Genuine Parts and AccessoriesUK: 08709 077 077
Republic of Ireland: (01) 842 6836
A wide range of genuine parts and accessories are available from our hotline or through our web site.
Genuine parts and accessories, extended warranties and service repairs are all
available on our web-site at:
GB
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Guarantee
"Satisfaction guaranteed or your money back"
We give you a unique 'satisfaction guaranteed' promise - valid for 90 days - after you have
purchased your Hotpoint appliance. If there is a technical problem simply call Hotpoint Repair service
engineer to call. If the technical problem is not resolved under this guarantee, we will replace your
machine or, if you prefer, give you your money back.
All Hotpoint appliances carry a fully inclusive 12 month parts and labour guarantee as well as free
replacement parts for the first 5 years (except microwaves, selected integrated appliances and cooker
hoods, which have a one year guarantee) provided that they are fitted by a Hotpoint engineer.
Guarantee terms and conditions
Your guarantee is only applicable in the United Kingdom or Republic of Ireland and is subject to the
following provisions that your appliance:
l
l
Has been installed and used correctly in accordance with this instruction booklet.
Has been used solely for domestic purposes and is located on domestic premises (ie. not for
commercial or trade use).
l
l
Has been properly connected to a suitable electrical supply voltage as stated on the appliance
rating plate.
Has not been subject to misuse, accident, modified or repaired by anyone other than one of our
own service engineers.
For pre purchase information on any other Hotpoint product call: 08701 50 60 70
Recycling & Disposal Information
As part of Hotpoint's continued commitment to helping the environment, Hotpoint reserves the right to
use quality recycled components to keep down customer costs and minimise material wastage.
Please dispose of packaging and old appliances carefully.
To minimise risk of injury to children, remove the door, plug and cut mains cable off flush with the
appliance. Dispose of these parts separately to ensure that the appliance can no longer be plugged
into a mains socket, and the door cannot be locked shut.
GB
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Key Contacts
After Sales Service
Over 1200 trained specialists, directly employed by us, ensure that you can have complete confidence in
both the appliances and services we offer.
Repair Service and Information Desk
UK: 08709 066 066
(Open 8 to 8 Mon - Fri, 8:30 to 5:30 Sat, 10 to 4 Sun & Bank Holidays)
Republic of Ireland: 1850 302 200
Note: Our operators will require the following information:
Model number:
Serial number:
Extended Warranties
UK: 08709 088 088
(Open 8 to 8 Mon - Sun)
Republic of Ireland: 1850 502 200
Genuine Parts and Accessories
UK: 08709 077 077
(Open 8-30 to 5-30 Mon - Fri & 9 to 12 Sat)
Republic of Ireland: (01) 842 6836
Merloni Elettrodomestici UK Ltd, Morley Way, Peterborough, PE2 9JB.
195.043.662.00
06-2004Part no. FP157 - 01
Download from Www.Somanuals.com. All Manuals Search And Download.
|