kitchen think
Instructions for Installation and Use
Electric Hob
Model E6004
To the Installer
Before installation fill in the product details on the back cover this book.
The information can be found on the rating plate.
To the User
You must read the instructions prior to installing and using the appliance and
then retain them for future reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
Introduction
3
For Your Safety
4
Know your Hob
How to use your Hob
Practical Advice
Care and Cleaning
Troubleshooting
Installation
5
5
6
7
7
8
Electrical Connection
After Sales Service
Hotpoint Guarantee
Key Contacts
9
10
11
Back Cover
Retention of this Instruction Book
This Instruction Book must be kept handy for reference as it contains important details on the safe and proper use of the
appliance.
If you sell or pass the appliance to someone else, or move house and leave it behind, make sure this Book is also
provided so the new owner can become familiar with the appliance and safety warnings.
If the Book is lost or damaged a copy may be obtained from:
GDA LTD., Morley Way, Peterborough, PE2 9JB
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Your new hob is guaranteed* and will give lasting service. This guarantee is only applicable if the appliance has been
installed in accordance with the installation instructions detailed in this booklet.
To help make best use of your cooking equipment, please read this booklet carefully.
The hob is designed specifically for domestic use and responsibility will not be accepted for use in any other installation.
When first using the hob ensure that the room is well ventilated (eg. open a window or use an extractor fan) and that
persons who may be sensitive to the odour avoid any fumes. It is suggested that any pets be removed from the room
until the odour has ceased. This odour is due to temporary finish on elements.
*The guarantee is subject to the provisions that the appliance:
(a) Has been used solely in accordance with this booklet.
(b) Has been properly connected to a suitable supply voltage as stated on the rating plate, attached to the
appliance.
(c) Has not been subjected to misuse or accident or been modified or repaired by any person other than the
manufacturers authorised employee or agent.
(d) Has been correctly installed.
This appliance conforms with the following European Economic Community directives
-
-
-
73/23/EEC of 19/02/73 (LowVoltage) and subsequent modifications.
89/336/EEC of 03/05/89 (Electromagnetic Compatibility) and subsequent modifications.
93/68/EEC of 22/07/93 and subsequent modifications.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
ForYour Safety
When used properly your appliance is completely safe but as with any electrical product there are certain
precautions that must be observed.
PLEASE READTHE BELOW PRECAUTIONS BEFORE USINGYOUR APPLIANCE.
To maintain the efficiency and safety of this appliance, we recommend you do the following:
- only call the Service Centres authorised by the manufacturer.
- always use genuine spare parts.
ALWAYS:
NEVER:
- make sure you remove all packaging and dispose of
- attempt to install or repair the appliance without the
safely.
assistance of qualified personnel.
- check the soundness of the appliance after it has been
unpacked.
- store items above the appliance that children may attempt
to reach.
- make sure you understand the controls before using the
appliance.
- heat up unopened food containers, as pressure can build
up causing the container to burst.
- keep children away from the appliance during use.
- take care to avoid heat/steam burns when operating the
controls.
- use the appliance to heat up anything other than food.
- use the appliance as a room heater.
- dry any items on the hob.
- make sure the controls are turned off when you have
finished cooking and when not in use.
- install the appliance next to curtains or other soft
furnishings.
- disconnect from the power supply, and allow to cool,
before cleaning or performing maintenance.
- disconnect from the power supply should any glass panel
(if fitted) crack or shatter and then DO NOT USE the hob
until it is repaired.
- refer servicing to a qualified appliance service engineer.
- keep the hob clean as a build up of grease or fat from
cooking can cause a fire.
- follow the basic principles of food handling and hygiene
to prevent the possibility of bacterial growth.
- dry food thoroughly before frying and lower it slowly into
the hot oil or fat. Frozen food in particular, will cause frith
and spitting if added too quickly.
- allow children to play with or tamper with the controls.
- leave children unsupervised where cooking appliances
are installed as all the cooking surfaces get hot during and
after use.
- store chemicals, foodstuffs or pressurised containers in
or on the appliance, or in cabinets immediately above or
next to the appliance.
- use flammable or plastic items on or near the hob.
- use adapters, multiple sockets and/or extension leads.
- fill a deep fat frying pan more than 1/3 full of oil, or use a
lid.DO NOT LEAVE UNATTENDED WHILE COOKING.
- fry too much food at a time, especially frozen food. This
only lowers the temperature or the oil or fat too much,
resulting in greasy food.
- keep outside of pans clean and free from streaks of oil or
fat.
- place pans centrally over the hotplates making sure
handles are kept away from the edge of the hob and cannot
be heated by other hotplates/pans.
- pull on the appliance or the supply cable to unplug it from
the electrical outlet.
- allow power cables of other appliances to come into contact
with hot parts of this appliance.
- keep any ventilation slots clear of obstructions.
- expose the appliance to atmospheric agents, such as
rain or sunlight.
- operate the appliance with wet hands.
- operate the appliance when barefoot.
- allow anyone to sit or stand on any part of the appliance.
- use misshapen pans which may be unstable.
- use fish kettles or large preserving pans across two
hotplates.
- leave anything on the hob surface when unattended and
not in use.
- gaze at halogen elements when they are in operation.
SAFETY ADVICE
IMPORTANT - As with any cooking appliance there could be some fire risk attached to the heating of oil, particularly
for deep fat frying. Cooking utensils containing oil must not be left unattended (eg. to answer the telephone) on or in
close proximity to the cooking areas.
INTHE EVENT OF A CHIP PAN OR ANY OTHER PAN FIRE:
1.Turn off the hotplates.
2. Cover the pan with a fire blanket or damp cloth, this will smother the flames and extinguish the fire.
3. Leave the pan to cool for at least 60 minutes before moving it. Injuries are often caused by picking up a hot pan and
rushing outside with it.
NEVER USE A FIRE EXTINGUISHER TO PUT OUT A PAN FIRE as the force of the extinguisher is likely to tip the
pan over. Never use water to extinguish oil or fat fires.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Know your Hob
A
A
A Cooking areas
B Controls zone
C Residual heat indicator light
B
A
A
-
+
C
.
HowTo UseYour Hob
When the hob is plugged in for the first time, an audio
Guide to using the hotplates:
The heating elements are circular in shape and turn red
in colour 20-30 seconds after they have been turned on.
signal sounds after a few seconds.You can then turn on
the hob.
Power on
Mixed halogen zones.
To turn on the power, hold your finger on the button
.
The hob utilises heating elements which are made up of
two halogen lamps and a circular heating element.
This combination provides ideal heat distribution across
the entire surface of the cooking area. Halogen lamps
provide an instantaneous emission of a large quantity of
light and heat, which means they are:
Heating zone controls
Each heating zone is controlled by one of the selection
buttons, whose design reflects the configuration of the
heating zones themselves
8. 8.
•
a rapid source of heat similar to that provided by gas
burners;
•
an equally rapid elimination of the heat source.
Halogen lamps are extremely easy to use and their
operation is similar to that of other heating elements.
8. 8.
and by two power level buttons
Pos. Operation
To turn on a heating zone and increase its power level,
select the desired heating zone.Then adjust the power
level, which is displayed in steps from 0 to 9.
0
1
2
3
4
5
6
7
8
9
switched off
melting butter, chocolate, etc.
To set a heating zone to maximum power immediately,
press briefly on the "-" button.The heating zone is turned
on at 100% power.
heating liquids
To accelerate the heating time of a heating zone, use
the "Booster". Adjust the power level of the heating zone
to its maximum (9).Then press the "+" button.The Booster
funtion is activated when the number 9 is replaced by "A".
Choose the power level of the Booster (1 to 8).The Booster
stops automatically when the set temperature is reached.
heating creams and sauces
cooking meats and desserts
pasta - rice
frying steaks - fish - omelettes
frying other foods
To turn off the heating zone, press on the "+" and "-"
buttons at the same time. The power level is immediately
set back to 0 and the heating zone is turned off.
or press the "-" button. The heating zone's power level
descends gradually until it is turned off.
To turn off the entire hob simultaneously, press the
button
.The entire hob is turned off. Be sure to unlock
the hob before turning it off.
4 residual heat indicator lights (C)
Even after a heating zone is turned off, its residual heat
indicator lights stays on to show that the corresponding
heating zone is still hot (temperature over 60°C). These
indicator lights warn you of the risk of injury by burning.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
HowTo UseYour Hob
How to lock the controls
Safety Cut-Off
When the hob is on, it is possible to lock the controls so
that the settings cannot be changed inavertently (due to
cleaning, children playing, etc). Hold your finger over the
If one or several cooking zones are left on, the power
automatically cuts off after a given period of time (see
below).
When the safety cut-off operates, "0" appears in the display
zone.
To turn off the safety cut-off function, switch the hob off
with the power supply button and then switch back on.
button
the indicator light next to the button goes on.
To modify the power level of stop cooking, all your
need to do is press the button
light goes off.
again, the indicator
You must the reselect the desired heating zone to reactivate
the settings.
Power level
Maximum operating time (hours)
Safety features
1 - 2
3 - 4
5
6 - 8
9
6
5
4
1.5
1.5
If an object (pan, lid, etc) is left on the control zone for
more than 10 seconds or a button in the controls zone is
pressed for too long, an audio signal is triggered.
• To stop the audio signal, remove the object causing the
interruption.The hob is now turned off.
•To reactivate the controls, follow the procedure for turning
on the hob.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Practical Advice
Choice of utensils:
Every Electric Hob deserves the right choice of utensils.
We recommend for optimum performance the use of good
quality utensils.
PANS SHOULD NOT:
•
•
•
•
Be concave (bowed in).
Be convex (bowed out).
Be rimmed.
Be deeply ridged.
BUT SHOULD BE ESSENTIALLY FLAT
Always
Never
•
Use good quality flat-based cookware on all electric
heat sources.
•
•
Use gauze, metal pan diffusers, asbestos mats and
stands eg. wok stands - they can cause overheating.
Use utensils with skirts or rims eg. buckets and some
kettles.
•
•
•
•
Place pans centrally on the hotplate.
Ensure pans have clean, dry bases before use.
Ensure pans match the size of the heating area.
Remember good quality pans retain heat well, so
generally only a low or medium heat is necessary.
Ensure pan handles are positioned safely and away
from heat sources.
Lift pans, do not drag.
Use pan lids, except when frying.
Deal with spillage immediately, but with care.
•
•
•
•
•
Use badly dented or distorted pans.
Leave an element on when not cooking.
Cook food directly on the hotplate.
Drag or slide utensils across the hotplate.
Place large preserving pans or fish kettles across two
hotplates.
•
•
•
•
•
•
Place plastic vessels or utensils on a hot hob.
Use the hob as an area for storage.
The Best Combinations:
Hob Spillages:
Below is a general guide to the types of pan suitable for
different types of hobs and cookers. Remember pans
should be good quality with smooth, flat bases. For any
further information refer to the manufacturers instructions.
1. Always clean up any spillage immediately with a clean
cloth or a paper towel to avoid any unnecessary damage
to the hob. Extreme care should be taken to avoid team
burns and hot surfaces when cleaning spillage rom the
hob.
2. When cooking food that contains sugar (most food) or
syrup, use a utensil which is large enough to prevent boil
over or spillage. Sugar spillage will permanently damage
the hob and therefore should be cleaned off with care
immediately. If sugar spillage has occured, remove it as
long as it is still hot, with a metal safety razor scraper.
This will avoid any damage.
NEVER let it cool before removing.
3. Always ensure that the base of the utensil is dry before
placing on the hob.
Suitable
Aluminium
ꢀ
ꢀ
Stainless Steel with single layer copper
base
Stainless Steel with sandwich base of
aluminium and stainless or aluminium
and copper
ꢀ
Enamelled Steel
Enamelled Aluminium
Enamelled based cast iron
Cast iron
ꢀ
IMPORTANT: Extreme caution should be used when
cleaning the hot hob!
ꢀ
ꢀ With Care
✗
Copper
✗
Toughened glass or ceramic/glass/
pottery
✗ Not Recommended
Mild steel, Ferro-magnetic or stainless
with a magnetic sandwich base
ꢀ
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Care and Cleaning
Powder Cleanser - Mineral deposits that are present in
Before cleaning or performing maintenance on your hob,
disconnect it from the power supply. Check that all controls
are in the OFF position before reconnecting.
hard water and some foods may cause discolouration, that
appear in the form of grey or brown stains. The stains
sometimes appear to be in or under the glass surface. If
there are any persistent stains after using any of the other
recommended cleaning materials, powder cleanser may be
applied, following the manufactures instructions. DO NOT
use abrasive cleaners or powder cleanser on the painted
metal framework. Pans with aluminium bases should be
lifted rather than dragged across the hob surface.This will
avoid metal rubbing off the pan onto the glass. Such marks
are easily removed by the powder cleanser provided they
are not subsequently baked on for long periods at high
temperatures.
NEVER USE:Washing powder,harch abrasive,scouring
pads, aerosol cleaners or oven chemical clearners of
any kind.
Cleaning materials to avoid
•
Household abrasive powders, eg.Vim.
•
Oven chemical cleaners, aerosols and oven pads -
Caustic cleaners such as these will etch the surface
and attack the metal frame.
•
Bath and sink cleaners may mark the surface.
Cleaner Conditioner - Regular use of the conditioner will
make the surface easier to clean thus ebsuring that years
of heavy abrasive cleaning do not progressively dull the
surface. If the hob is scratched through accident or misuse.
soil that collects will appear as fine brown lines; these are
not fully removable but can be made less obvious by the
daily use of cleaner conditioner.Cooking performance is in
no way affected by scratched on the surface.
The Ceramic Hob
To reduce the amount of cleaning always ensure that the
hob and cooking utensils are clean and dry before use.
Regular use of cleaner conditioner is recommended for
proper care and protection of the hob surface. Apply
conditioner before using the hob for the first time. It contains
a mild cleaning agent, so that subsequent cleaning
applications may clean off soil and apply a protective film
at the same time. For stubborn stains or heavy soiling use
any of the following materials, and finish off with conditioner:
Control Knobs
Wipe over the knobs with a soft cloth wrung out in warm
soapy water or mild non-abrasive.Then, after wiping with
a cloth wrung out in clear water, dry with a soft clean cloth.
1.
2.
3.
Cif, non-scratch scouring cream.
Liquid Gumption Kitchen Cleanser.
Special Powder Cleanser.
Painted Metal SurroundTrim
Wipe over with a cloth wrung out in warm soapy water
only. DO NOT USE ABRASIVES.
Stainless Steel
Wipe with a cloth wrung out in warm soapy water followed
by a wipe with a cloth wrung out in clean water and then
dry with a soft clean cloth.
Troubleshooting
Before calling service for assistance, check through the
following list, there may be nothing wrong.
If, despite all of these checks, the hob does not function
properly and problem persists, call Hotpoint Service (see
KEY CONTACTS, back page), informing them of:
- The type of problem.
- The abbreviation used to identify the model (Mod. ...) as
indicated on the warranty.
Nothing works.
Check to make sure that:
•
the mains wall switch is switched on.
If a control is on, the corresponding residual heat
indicator light will come on.
IMPORTANT:
Hotplates are slow to boil or will not simmer.
Check to make sure that:
Never call upon technicians not authorized by the
manufacturer, and refuse to accept spare parts that are
not original.
•
Your pans conform with the recommendations detailed
in this book.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
The four securing springs are held in place by 4Torx screws.
These instructions are intended for the qualified technician
installing the appliance in order to insure that the installation,
adjustments and maintenance procedures are performed
correctly and comply with the regulations currently in effect.
Important: the hob must be disconnected from the
power supply before making any adjustments or
performing any maintenance, etc.
To remove the hob unit from its housing, undo the 2 Torx
screws at the front, then the 2 Torx screws at the rear.
The 4 screws should be accessible at all times for this
purpose.
REAR SPRING ASSEMBLY
FRONT OF THE HOB UNIT
REAR LEFT MOUNTING
Installing built-in hobs
REAR RIGHT MOUNTING
WORK
SURFACE
The hob has a type X protection rating against overheating
in compliance with regulation CEI 335-2-6.Therefore, the
hob cannot be installed alongside of cabinets which are
higher than the surface of the hob itself. The following
precautionary measures should be observed in order to
ensure proper installation:
HOB UNIT FAST DOWN
a) Hoods must be installed in compliance with the required
specifications contained in the instruction manual for
the hood itself.
b) The built-in ceramic glass top can be installed on any
counter top as long as it is 600 mm or more in width
and resistant to temperatures of up to 100°C.
The dimensions and the position of the hole are shown
in fig..
FRONT LEFT MOUNTING
FRONT RIGHT MOUNTING
SEAL MOUNTING
FRONT / REAR
RIGHT / LEFT
MOUSSE 5x8 mm
c) If a wooden panel is installed beneath the hob for
insulation purposes, it must be positioned at least 20
mm from the bottom part of the hob itself.
510
Distance to
keep between the
cut-out slot and
the cabinet
Note: If the hob is installed above a built-in oven, it is
preferable that the oven be installed in such a way that it
is set on two strips of wood; if the oven is installed on a
continuous base, there must be an opening in the back of
at least 45 x 560 mm.
560 +/- 1
X (CEI 335-2-6)
These measurements must absolutely be observed in
so far as improper installation can cause the surrounding
surface areas to overheat. It is recommended that the
hob be installed at a distance of at least 40 mm from
the back wall or other vertical surfaces to ensure that
the air circulates properly over the cooking area and to
avoid overheating the surrounding surfaces. A seal or
gasket is provided with the hob; make sure that it
adheres properly to the bottom part of the frame of the
hob.The seal must fit properly around the entire cooktop
frame and especially along the corners in order to create
a seal between the counter top and the hob itself so as
to prevent spills or splashes from leaking into the
cabinet below.
560 mm.
The built-in oven must be equipped with a
forced air cooling system.
Very important
It is essential to instali the hob on a totally flat surtace.
Any damage caused by incorrect fitting may alter the
characteristics or impair performance.
Insert the hob into the hole, pressing firmly around the
frame to make it adhere to the counter top.
Make certain that the seal around the outside edge of
the hob is correctly installed in order to avoid any
leakage into the cabinetry below.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Electrical Connection
Electrical Connection
Connecting the supply cord to the electrical mains:
THIS APPLIANCE MUST BE EARTHED.
The installation procedure must be carried out by a qualified
electrician.
The electrical safety of this appliance is guaranteed only
if the appliance is correctly earthed in compliance with the
standards of electrical safety.
The hob must be connected to a double pole mains switch
which must be installed between the appliance and the
mains.The double pole mains switch must have a minimum
of 3mm of space between the contacts, be sized to the
load and comply with current regulations (the switch must
not be able to disconnect the earth conductor).
The manufacturer can under no circumstances be
considered responsible for any damage that might occur
due to incorrect earthing of the hob.
The supply cord should conform to BS6004 conductor size
4mm and must be positioned so that no part of it reaches
a temperature of 50°C higher than room temperature.
2
The electric hob is not supplied with a power supply cord
because the type of cord used depends on the type of
electrical connection (see following diagram). Open the
terminal box, following the instructions illustrated in the
diagram below:
Before making the connection, make sure that:
•
•
•
the limiter switch (fuse) and the residual wiring can
support the appliance load (see the rating plate).
the mains system is properly earthed in compliance
with current regulations and provisions.
there is easy access to the socket or the double pole
mains switch after the appliance is installed.
2
IMPORTANT:
If the hob is installed above a built-in oven, the electrical
connection for the hob must be independent of that for the
oven, both for safety reasons and to facilitate the removal
of the oven for maintenance, repair etc.
1
3
2
4
1
5
V
IMPORTANT POINTS:
Your hob is supplied with a special connection cable.
If ever the cable is damaged it should be replaced by an
authorised service engineer only.
Disconnect the hob form the electrical supply before any
work is carried out.
Electrical Connections:
Fuse 20 A*
L
N
* Application of the simultaneity coefficient in compliance
with standard EN 335-2-6
Y-type connection in compliance with standard
EN 335-2-6
Voltage and frequency of power supply:
230-240V
50-60Hz
6200W
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
13
Download from Www.Somanuals.com. All Manuals Search And Download.
After Sales Service
"No company is better positioned to offer an after sales service on a
Hotpoint appliance than us - the manufacturer"
As part of our commitment to you, all Hotpoint appliances have the added benefit of a fully inclusive parts
and labour guarantee for the first 12 months. In addition to this you also have the advantage of free
replacement parts for the first 5 years when fitted by a Hotpoint
engineer. When the 12 months parts and labour guarantee expires we offer the following after sales
service options:
Repair Service and Information Help Desk
UK: 08709 066066
Republic of Ireland: 1850 302 200
Note: Our operators will require the Model number and the Serial number of your appliance
Available 364 days a year with a fast, effective and value for money service. We have the largest white
goods repair service in the UK with over 1200 of our own fully trained engineers. All repairs include a
parts and labour guarantee for 12 months from the date of the repair.
If you require any information or have any questions about your appliance, our operators are on hand with
help and advice.
All this ensures that you will receive the best available after sales service possible.
Extended Warranties
UK: 08709 088 088
Republic of Ireland: 1850 502 200
Whether you have just one or a number of Hotpoint appliances in your kitchen, we offer two service cover
plans to give you total peace of mind.
ꢁ Repair Protection Plan - FREE service repairs for a single Hotpoint appliance during the period of
cover.
ꢁ Kitchen Cover - FREE service repairs for all your Hotpoint appliances less than 8 years old.
Genuine Parts and AccessoriesUK: 08709 077 077
Republic of Ireland: (01) 842 6836
A wide range of genuine parts and accessories are available from our hotline or through our web site.
Genuine parts and accessories, extended warranties and service repairs are all
available on our web-site at:
Download from Www.Somanuals.com. All Manuals Search And Download.
Guarantee
"Satisfaction guaranteed or your money back"
We give you a unique 'satisfaction guaranteed' promise - valid for 90 days - after you have
purchased your Hotpoint appliance. If there is a technical problem simply call Hotpoint Repair service or
visit our web-site at www.theservicecentre.co.uk and where necessary, we will arrange for an engineer
to call. If the technical problem is not resolved under this guarantee, we will replace your machine or, if
you prefer, give you your money back.
All Hotpoint appliances carry a fully inclusive 12 month parts and labour guarantee as well as free
replacement parts for the first 5 years (except microwaves, selected integrated appliances and cooker
hoods, which have a one year guarantee) provided that they are fitted by a Hotpoint engineer.
Guarantee terms and conditions
Your guarantee is only applicable in the United Kingdom or Republic of Ireland and is subject to the following
provisions that your appliance:
ꢁ
ꢁ
Has been installed and used correctly in accordance with this instruction booklet.
Has been used solely for domestic purposes and is located on domestic premises (ie. not for commercial
or trade use).
ꢁ
Has been properly connected to a suitable electrical supply voltage as stated on the appliance rating
plate.
ꢁ
Has not been subject to misuse, accident, modified or repaired by anyone other than one of our own
service engineers.
For pre purchase information on any other Hotpoint product call: 08701 50 60 70
Recycling & Disposal Information
As part of Hotpoint's continued commitment to helping the environment, Hotpoint reserves the right to use
quality recycled components to keep down customer costs and minimise material wastage.
Please dispose of packaging and old appliances carefully.
To minimise risk of injury to children, remove the plug and cut mains cable off flush with the appliance.
Dispose of these parts separately to ensure that the appliance can no longer be plugged into a mains socket.
Download from Www.Somanuals.com. All Manuals Search And Download.
Key Contacts
After Sales Service
Over 1200 trained specialists, directly employed by us, ensure that you can have complete confidence in
both the appliances and services we offer.
Repair Service and Information Desk
UK: 08709 066 066
(Open 8 to 8 Mon - Fri, 8 to 6 Sat, 10 to 4 Sun & Bank Holidays)
Republic of Ireland: 1850 302 200
Note: Our operators will require the following information:
Model number:
Serial number:
Extended Warranties
UK: 08709 088 088
(Open 8 to 8 Mon - Sun)
Republic of Ireland: 1850 502 200
Genuine Parts and Accessories
UK: 08709 077 077
(Open 8-30 to 5-30 Mon - Fri & 9 to 12 Sat)
Republic of Ireland: (01) 842 6836
General Domestic Appliances Limited, Morley Way, Peterborough, PE2 9JB.
195.036.368.00
December 2002 Part no. FP161 - 01
Download from Www.Somanuals.com. All Manuals Search And Download.
|