Menu [SHUTTER] - SHUTTER AUTO
Menu [SHUTTER] - FIXED Mode Setup
Menu [FUNCTION] - MOTION AREA 2
Main Menu - ADJUST
Design and specifications are
subject to change without notice.
/
Rev 0 07 04
P/N:3810-0148B
↙
1) SHUTTER setup (for LENS MANUAL)
1) FIXED
setup
1) MOTION OSD description
1) ADJUST setup
SHUTTER FIXED
①
②
!
Press MENU button in ADJUST.
①
①
↙
①
②
③
④
Press LEFT or RIGHT button in SHUTTER
to select the mode to
Press MENU button in FIXED
to display the screen on the right side.
ALL CLEAR - Release all set AREA
Series
HD61
Move to screen on the right side.
↙
↙
AUTO
◀ ▶ FLK ◀ ▶ FIXED
ALL SET - Set all 64 MOTION AREA.
ADJUST
CONTRAST
SHUTTER M : 1/60
↙
◀ ▶MANUAL
.
Each LEVEL value can be
SHUTTER AUTO
②
Press LEFT or RIGHT button in SHUTTER.
Can be set in ([NTSC: 1/60 ~ 1/100,000]
[PAL: 1/50 ~ 1/100,000]) range.
083
12
adjusted using LEFT, RIGHT button.
RETURN - Return to MOTION AREA Setup Mode.
EXIT - Save AREA and return to MOTION SETUP MODE.
Operation Manual
SHARPNESS
!
↙
Setting Mode : AUTO
↙
:
RETURN
_
BRIGHTNESS
056
CB GAIN
190
205
2) CONTRAST setup
Color Dome Camera
①
Adjust Y-gain value (0~255)
_
CB GAIN
↙
:
RETURN
RETURN
3) SHARPNESS setup
s
①
Adjust aperture value (0~31)
_
4) CB GAIN setup
_
Need Help?
①
Adjust COLOR CB GAIN value (0~255)
Call 1.800.796.CCTV for sales, service and customer support.
_
5) CR GAIN setup
READ AND KEEP THIS
OPERATION MANUAL
_
①
Adjust COLOR CR GAIN value (0~255)
16
18
20
22
24
26
28
30
17
19
21
23
25
27
29
31
32
33
35
37
39
. User Information
3
-
Axis
Menu [WHITE BAL.] - WHITE BALANCE Mode Setup
Main Menu - FUNCTION
Main Menu - LANGUAGE
Main Menu - RESET
INFORMATION
↙
1) WHITE BALANCE setup
1) FUNCTION
setup
1) LANGUAGE setup
1) RESET
CAUTION
AWB FIXED
SETUP
This equipment has been tested and found to comply with limits for a Class A digital device, pursuant to part 15
of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at their own expense.
①
①
①
①
In WHITE BAL., press LEFT, RIGHT button
to select the mode you wish to operate
Press MENU button in FUNTION
to show the OSD display on the right.
DEFAULT value - ENGLISH
Select RESET.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAMERA ID
SHUTTER
WHITE BAL.
FUNCTION
ADJUST
LANGUAGE
RESET
EXIT
OFF
AUTO ↙
ATW
Press MENU button.
The screen on the bottom appears.
↙
ATW ◀ ▶ AWB ◀ ▶ FIXED
②
After selecting LANGUAGE,
FUNCTION
SETUP
↙
◀ ▶MANUAL
.
AWB FIXED : MODE 1
change setting using LEFT or RIGHT button.
↙
CAMERA ID
SHUTTER
WHITE BAL.
FUNCTION
ADJUST
LANGUAGE
RESET
EXIT
OFF
CAUTION! TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
BLC
OFF
2) Select item using UP, DOWN button.
3) Set details using LEFT, RIGHT button.
4) Click "Return" to go to MAIN SETUP
②
③
Select YES or NO.
↙
AUTO ↙
ATW
↙
AGC
ON ↙
AUTO ↙
OFF
OFF
0.45
OFF
NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
③
Choose the language mode you
wish to operate in.
ENGLISH
↙
↙
2) FIXED
setup
DAY NIGHT
PRIVACY
MIRROR
GAMMA
MOTION
RETURN
↙
:
RETURN
Explanation of two Symbols
Select YES to reset your camera
to default factory condition
①
Can set from MODE 1 to MODE 4.
↙
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of un-insulated
"dangerous voltage" within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
ENGLISH
↙
WARNING
↙
3) MANUAL
setup
AWB MANUAL
LOAD DEFAULT
The manufacturer could void the user's authority to operate the equipment.
①
As shown on the lower right picture,
set Red and Blue color value temperature.
RED
113
255
The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and maintenance-
(servicing) instructions in the literature accompanying the appliance.
CAUTION - To prevent electric shock and risk of fire hazards:
Do NOT use power sources except for that specified.
Do NOT expose this appliance to rain or moisture.
!
YES
NO
BLUE
ENGLISH ◀ ▶ Korean ◀ ▶ Chinese1 ◀ ▶ Chinese 2 ◀ ▶ Japanese
②
Press MENU button in RETURN
to exit from setup mode.
THE GRAPHIC SYMBOLS WITH SUPPLEMENTAL MARKING ARE ON THE BOTTOM OF THE SYSTEM.
"WARNING-TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THE UNIT TO RAIN OR MOISTURE"
↙
:
RETURN
This installation should be made by a qualified service person and should abide to all local codes.
2
3
5
7
9
34
. Contents
1. SAFETY INSTRUCTIONS
9. SPECIFICATIONS
3-
Axis
3
-
Axis
Axis
Axis
Axis
Menu [FUNCTION] - BLC 1
Menu [FUNCTION] - BLC 2
3
-
Axis
MODEL
HD61
HD61X
1) BLC SETUP MODE
1) BLC AREA MODE
Thank you for purchasing this COLOR VIDEO CAMERA.
BLC, AGC
ON / OFF (Level Adjustable)
BLC SETUP
BLC AREA ↙
BLC RATIO
Read Instructions
Read all of the safety and operating instructions
Installation
①
↙
①
Signal System
Image Sensor
Effective Pixels
Video Output
NTSC
PAL
Day & Night
BW / Color / Auto
ON / OFF (4 Programmable Zone)
ON / OFF (Horizontal)
Press MENU button in BLC ON
,
Exit from BLC AREA MODE
to move to BLC SETUP MODE screen.
Before using this camera, please read this operation manual carefully to obtain
the best result and keep this manual for future reference.
Do not place this product on an unstable cart, stand,
or table. The product may fall causing serious injury
to a child or adult, and damage to the product.
Use only with a cart or stand recommended by the
manufacturer, or sold with the product.
Mounting should follow the manufacturer's instructions,
and should use a mounting accessory recommended
by manufacturer.
to display the screen on the right side.
2:1 Interlace Transfer 1/3 Inch Super HAD CCD
510(H) x 492(V) 500(H) x 582(V)
Composite: 1.0Vp-p, 75Ω, Unbalanced
Privacy
before using the product.
Mirror
16
BLC AREA
Retain Instructions
Save this instructions for later use.
Gamma
User / 0.5 ~ 1.0 Adjustable
ON / OFF (64 Programmable Zone)
0 ~ 255 (Level Adjustable)
0 ~ 31 (Level Adjustable)
Manual Lens
2) BLC OSD description
↙
2) BLC AREA
setup
ALL CLEAR
ALL SET
RETURN
EXET
RETURN
Sync. System
Luminance S/N Ratio
Horizontal Resolution
Min. Illumination (F1.2)
Lens
Internal Sync
More than 50dB (AGC OFF)
380 TV Lines
Motion Detection
Contrast
①
②
③
④
ALL CLEAR - Clear all set AREA
...........
........................
...........
①
②
③
Use UP, DOWN, LEFT, RIGHT button
to move the AREA setup position.
1. SAFETY INSTRUCTIONS
5
6
7
8
9
6. CONNECTIONS
10
11
12
36
38
ALL SET - Set all 64 BLC AREA
Cleaning
Sharpness
..........................
2. PRECAUTIONS
7. NAME AND FUNCTIONS
Unplug this appliance from wall outlet before
cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
RETURN - Return to BLC AREA setup mode.
Set or release BLC AREA
using MENU button.
0.1 Lux(30IRE, AGC ON), 0 Lux(IR LED)
Manual Vari-focal (f=4~9mm)
Manual
Applicable Lens
Supply Voltage
Power Consumption
Operating Temperature
Storage Temperature
Dome Size (Ø)
Weight
................................
..........................
...............
EXIT - Save AREA and return to
12VDC (10V~15V)
3. FEATURES
8. OPERATING CAMERA
BLC SETUP MODE.
Power source
Focus
Max. 4.5W / 360mA
Press MENU button for more than 1 second
to move to BLC AREA MODE.
......................
Water and Moisture.
This product should be operated only from the type
of power source indicated on the marking label.
If you are not sure of the type of power supplied to
your home, consult your dealer or local power
company.
4. COMPOSITION
5. INSTALLATION
9. SPECIFICATIONS
Electronic Shutter
White Balance
Camera ID
1/60 ~ 100,000
1/50 ~ 100,000
-10℃~+50℃ (Recommendation: -5℃~+40℃)
Do not use this product near water or moisture.
(For example. near a bathtub, wash bowl, kitchen
sink, or laundry tub, in a wet basement, or near a
swimming pool,etc)
ATW (1,800˚K~10,500˚K) / AWB / Fixed / Manual
ON / OFF
-20℃~+60℃
100 mm
..........................
...............
10. TROUBLESHOOTING
Language
English / Korean / Chinese 1 / Chinese 2 / Japanese
Approx. 366g
4
36
2. PRECAUTIONS
3. FEATURES
10. TROUBLESHOOTING
. Memo
3-
Axis
3-
Menu [FUNCTION] - BLC 3
Menu [FUNCTION] - AGC
3-
Axis
3-Axis
If you have trouble operating your camera, refer to the following table.
If the guidelines do not enable you to solve the problem, contact an authorized technician.
1) BLC RATIO setup (BLC LEVEL value setup)
1) AGC setup
High Sensitivity 1/3 Inch Sony Super HAD CCD
①
①
↙
Use UP, DOWN button
to move to BLC RATIO.
AGC default setting ON
Handling
P r o b l e m
S o l u t i o n s
Min. Illumination (F1.2, 30 IRE) : 0.1 Lux (Color)
Do not disassemble the camera and never touch
parts inside the camera.
Be sure the ambient temperature is less than
40℃ in installation intended for long term
continuous operation.
BLC SETUP
BLC AREA ↙
BLC RATIO
AGC CONTROL
②
↙
Press MENU button in ON
to display the screen on the right side.
Nothing appears on the
screen.
• Check that the power cord and line connection between the camera and monitor
are fixed properly.
• Check that you have properly connected VIDEO cable to the camera VIDEO output jack.
0.0 Lux (IR LED On)
②
Use LEFT, RIGHT button
to change BLC LEVEL value (0~63)
0:MIN , 63:MAX
Do not drop the camera or subject it to shocks
and vibrations to avoid possible damage.
Day & Night (Programmable)
OSD (On Screen Display)
The image on the screen
is dim.
• Is lens stained with dirt? Clean your lens with soft, clean cloth.
• Set the monitor to proper condition.
③
④
095
AGC GAIN
Use LEFT, RIGHT button
to adjust AGC GAIN value (0~255)
0:MIN , 255:MAX
16
Avoid installing in a humid or dusty place.
• If the camera is exposed to too strong light, change the camera position.
• Adjust the lens' focus properly.
③
Press MENU button in RETURN
to move to FUNCTION MODE.
When attaching or removing the lens, handle
with care in order to that moisture and dust do
not enter the camera.
Avoid installing in places where there are
strong magnetic fields and electric signals.
RETURN
↙
:
RETURN
High Performance Menus For Functions
The image on the screen
is dark.
• Adjust the contrast feature of the monitor.
• If you have an intermediate device, set the 75Ω/ Hi-z properly.
• Adjust DC Level, on the OSD menu.
Press MENU button to return
to the previous screen.
• Privacy Zone Selectable (4 Programmable Zone)
• Motion Detection Selectable (64 Programmable Zone)
• Sharpness Enhanced Adjustable
• Flickerless Selectable
• Gamma Enhanced Selectable
Avoid installing in places where the camera
would be subject to strong vibrations.
The camera is not working
properly, and the surface
of the camera is hot.
• Check that you have properly connected the camera to an appropriate power source.
Installation and storage
Never expose the camera to rain and water.
Do not point the camera at the sun. This could
damage the camera whether it is operating or not.
• Is the camera facing to direct sunlight or fluoresent lighting?
Change the camera position.
The image on the screen
flickers.
Do not install the camera where the temperature
could exceed the allowable range.
• BLC Zone Selectable (64 Programmable Zone)
6
38
4. COMPOSITION
5. INSTALLATION
3-
Axis
3-
Menu [FUNCTION] - DAY NIGHT 1
Menu [FUNCTION] - DAY NIGHT 2
Ceiling
Stick the guide pattern on the wall or ceiling.
1
2
1) DAY NIGHT setup
1) DAY NIGHT OSD description
FUNCTION
①
①
Move to DAY NIGHT screen on the right side.
DELAY
DAY --> NIGHT or NIGHT --> DAY conversion time setup
Drill four holes according to the guide pattern then
insert anchors into the drilled holes.
Guide Pattern
Dome Base
BLC
AGC
OFF
ON ↙
AUTO ↙
OFF
②
Change setting using LEFT, RIGHT button.
0 : No DAY NIGHT AUTO conversion
1~63 : Can set from 1 second to 15 seconds
DAY NIGHT
PRIVACY
MIRROR
GAMMA
MOTION
RETURN
Draw out power / video wires to the connecting places.
Fixed the camera to a celling using four screws.
3
4
5
↙
↙
AUTO
◀ ▶ B/W
◀ ▶ COLOR.
OFF
0.45
OFF
Guide Pattern
②
START LEVEL
↙
2) AUTO
mode setup
Mounting
Screw
DAY --> NIGHT conversion illumination intensity setup 0~255 (DEFAULT : 4 Lux)
0 : High illumination intensity, 255 : Low illumination intensity
Adjust desired focus and scene by turning and moving
the 3-axis camera bracket by hand.
Operation Manual
①
↙
Press MENU button in AUTO
setup mode.
②
③
④
⑤
Move to screen on the right side.
!
Mounting Screw
Put the dome cover over the base.
Initial value setup is recommended.
6
7
DAY NIGHT AUTO
DELAY
Select item using UP / DOWN button.
Adjust value using LEFT / RIGHT button.
01
Fix the dome cover on the base by covering.
③
END LEVEL
NIGHT --> DAY conversion illumination intensity setup 0~255 (DEFAULT : 12 Lux)
0 : High illumination intensity, 255 : Low illumination intensity
Dome Cover
START LEVEL
END LEVEL
RETURN
092
074
Service Monitor Cable
NOTE
Press MENU in RETURN to return
to the previous screen.
!
Initial value setup is recommended.
Insert coin to the side hole and
remove the dome cover by twist coin.
8
6. CONNECTION
7. NAME AND FUNCTIONS
3-
Axis
3-
Menu [FUNCTION] - DAY NIGHT 3
Menu [FUNCTION] - PRIVACY
4
5
↙
1) B/W
mode setup
1) PRIVACY setup
FUNCTION
①
↙
①
②
③
Press MENU in B/W
setting
Default setting OFF - Use LEFT,RIGHT button.
Change setup to ON
↙
mode.
BLC
AGC
ON ↙
ON ↙
AUTO ↙
ON ↙
OFF
6
7
↙
After ON
mode setup, 4 AREA groups are
②
③
Move to screen on the right side.
Video
(Yellow)
Video Output
GND
DAY NIGHT
PRIVACY
MIRROR
GAMMA
MOTION
RETURN
#
1
2
configured as displayed on the right-side picture.
DAY NIGHT B/W
Press MENU button.
Details of each area is dsplayed.
1
Use LEFT, RIGHT button
to set BURST ON / OFF.
0.45
OFF
3
2
Power- 12VDC
(Red)
BURST
ON
#
2) PRIVACY details setup
④
After setup, return to the previous screen
by pressing MENU button.
Camera Lay-out
①
②
③
④
⑤
⑥
⑦
Select AREA SEL - PRIVACY 0~3.
PRIVACY
AREA STATE - 0~3 AREA ON/OFF
• The wire is polarized.
• Use 12V DC power source.
AREA SEL
AREA STATE
LEFT
AREA 0
ON
017
1
2
3
4
5
6
7
Tilt rotation: Adjusting the vertical angle.
Pan rotation: Adjusting the horizontal angle.
Horizontal rotation: Adjusting the horizontal position of the screen.
Focus handle: Focus (Far or Near)
Zoom handle: Zoom (Tele or Wide)
IR LED(4mm~9mm): 850nm / 30°(20EA), Power Consumption(4.5W)
Sensor
LEFT - Change left portion of each AREA size.
RIGHT - Change right portion of each AREA size.
TOP - Change top portion of each AREA size.
BOTTOM - Change bottom portion of each AREA size.
COLOR - Change entire color of the AREA (16 COLOR)
No. Function Terminal Color
R e m a r k
1.0 Vp-p
RIGHT
058
#1 Video Output
#2 Power Input
Yellow
Red
TOP
020
12VDC (10V~15V), 360mA (Max)
BOTTOM
COLOR
055
001
RETURN
10
11
13
15
8. OPERATING CAMERA
3-
Axis
Setting up the Menu
Menu [FUNCTION] - MIRROR
Menu [FUNCTION] - GAMMA
!
1) MIRROR setup
1) GAMMA setup (DEFAULT 0.45)
Push the Joy stick for one second, and the OSD
appears on the screen. Move the Joy Stick up, down,
left & right to control the OSD functions.
FUNCTION
FUNCTION
SETUP
①
①
MIRROR default setting OFF
In FUNCTION MODE,
use UP, DOWN button to select GAMMA.
BLC
AGC
OFF
BLC
OFF
ON setting - Use LEFT, RIGHT button.
S E T U P M E N U
- Push and hold MENU button 1 second
to access the setup mode.
ON ↙
AUTO ↙
OFF
AGC
ON ↙
AUTO ↙
OFF
OFF
0.45
OFF
DAY NIGHT
PRIVACY
MIRROR
GAMMA
MOTION
RETURN
DAY NIGHT
PRIVACY
MIRROR
GAMMA
MOTION
RETURN
CAMERA ID
SHUTTER
• ON
• OFF
②
②
Left and Right side is switched
as shown on the picture.
Use LEFT, RIGHT button
to adjust GAMMA value.
(USER ◀ ▶ 0.05 ◀ ▶ 0.10 ◀ ▶ 0.15 ~ 1.0)
• Select the status using the
joystick. (up, down, left, right)
UP
OFF
0.45
OFF
• AUTO
• ATW
• FLK
• AWB
• AGC
• FIXED
• MANUAL
• MANUAL
• PRIVACY
• MOTION
SW1
MENU(SET):
WHITE BAL.
FUNCTION
• FIXED
SET BY JOY STICK
LEFT
RIGHT
• BLC
• DAY NIGHT
SETUP
CAMERA ID
SHUTTER
WHITE BAL.
FUNCTION
ADJUST
OFF
• MIRROR
• CONTRAST
• GAMMA
J601
DOWN
AUTO ↙
ATW
↙
ADJUST
• SHARPNESS
OFF
ON
_
_
• CB GAIN
• CR GAIN
↙
LANGUAGE
RESET
• ENGLISH • KOREAN • CHINESE1 • CHINESE2 • JAPANESE
Service Monitor Connecter:
Use service monitor
connector to set camera angle
& focus when installing.
LANGUAGE
RESET
EXIT
ENGLISH
↙
J613
UP SW1
J611
LEFT
RIGHT
EXIT
DOWN
12
Main Menu - SETUP
Main Menu - CAMERA ID
Menu [FUNCTION] - MOTION
Menu [FUNCTION] - MOTION AREA 1
1) CAMERA ID setup (default setting OFF)
1) MOTION DETECTION setup
1) MOTION AREA setup
FUNCTION
①
↙
①
②
③
①
Press MENU key in ON
(Access ID setting MODE)
state.
DEFAULT value OFF
Use UP, DOWN, LEFT, RIGHT button
to move AREA setting position.
1. Press MENU button, then SETUP mode is activated.
BLC
AGC
OFF
↙
In ON
, press MENU button.
• MAIN SETUP menu is displayed on the monitor.
ON ↙
AUTO ↙
OFF
ID SETUP
②
③
Press MENU key in CAMERA ID.
DAY NIGHT
PRIVACY
MIRROR
GAMMA
MOTION
RETURN
Display MOTION details.
SETUP
②
③
Use MENU button to set and release AREA.
CAMERA ID
SHUTTER
WHITE BAL.
FUNCTION
ADJUST
LANGUAGE
RESET
EXIT
OFF
CAMERA ID
OFF
0.45
OFF
Character is changed each time UP, DOWN is
pressed. (Can select up to 63 letters)
2. Select OSD item using UP, DOWN button.
3. Set details using LEFT, RIGHT button.
AUTO ↙
ATW
↙
↙
2) AREA
setup
Press MENU button for more than 1 second
to move to MOTION AREA MODE
A
_
↙
C
①
↙
In AREA , press MENU button. (see p.31)
④
⑤
↙
Press MENU button in
exit from ID setup mode
to
POSITION
RETURN
↙
ENGLISH
↙
3) MOTION TH. Setup
Press MENU button in 'C' to correct and erase
the chosen entry.
2) MOTION AREA MODE
MOTION
①
Set motion sensitivity 0(MAX)~255(MIN)
4. Select "Exit" and then press the MENU button
to finish the SETUP (Save and Exit)
①
MOTION AREA
You will return to MOTION AREA MODE
after "Exit" from MOTION AREA MODE.
AREA ↙
ALL CLEAR
ALL SET
RETURN
EXET
4) MOTION TRACE setup
2) POSITION setup. Press POSITION ↙.
MOTION TH.
MOTION TRACE
RETURN
037
OFF
①
ON : Display motion detection AREA.
①
②
③
Move the character using UP, DOWN, LEFT, RIGHT button.
Press Menu button to confirm selection of the character.
!
Setting value can be adjusted
using LEFT or RIGHT button.
Press Return to go to previous screen. ID is displayed by pressing EXIT on MAIN MENU.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
|