K0021V2 2/06 Rev. A
ADEMCO 5828/5828V
Wireless Bidirectional Fixed-Word Keypads
USER GUIDE
GENERAL INFORMATION
KEYPAD KEYS
These keypads include 12-operational keys, as well as
four Special Function keys that are backlit for ease of
use when the keypad is active. To access the keypad
keys, simply open the swing-down door by applying
outward pressure on the door release slot on the right
side.
The ADEMCO 5828 and 5828V are wireless keypads
that can be used to operate and get status from your
security system. The 5828 and 5828V have the
following features (voice annunciation features apply
only to the 5828V):
•
Can be used to arm/disarm, and perform other
system operations.
Panic alarms are activated by pressing the key pairs
shown in the table below. Special Function keys A, B,
and C, can be programmed by your installer to provide
the same alarms by pressing a single key and holding it
down for 3-seconds, or can be assigned other system
operations. (Ask your installer to fill in the tables below
with assigned functions of these keys).
•
•
Can display and/or annunciate system status.
Can automatically display and/or annunciate a
change in system status if AC powered (e.g., for an
alarm, the keypad will announce the type of alarm
(fire or burglary) and location (e.g. kitchen window).
•
•
The 5828V Message Center can be used to record
and play back a voice memo to yourself, or leave a
message for a family member.
Key
Pairs
Function
Keys
Function
Function
A
B
C
D
[1] & [✱]
[✱] & [#]
[3] & [#]
Can be battery- or AC-powered (AC-powered units
have several advantages, described below).
Battery-Powered Operation: When powered by
battery, the keypad must first be activated by pressing
any numbered key. The keypad will display the current
system status within a few seconds. You may at any
time before or after receiving status, arm, disarm, send
a panic alarm, or perform other system operations. The
keypad becomes inactive when no keys have been
pressed for 15 seconds, and must be reactivated to
display the current status.
SOUNDER
The keypad’s built-in sounder pulses three times and
then pauses (repeatedly) for fire alarms, and generates
a continuous two-tone sound for burglary alarms.
HOW TO GET SYSTEM STATUS
When Powered By Battery
Pressing any key will turn on the keypad. However, to
specifically request system status from the control,
simply press the [✱] key. Status will be displayed
within a few seconds.
AC-Powered Operation: When powered by the
optional AC adapter, the keypad remains active at all
times. If AC power is lost, the keypad reverts to
battery-powered operation until AC power is restored
and a new status request is made ([✱] key).
When Powered By AC Power
NOTE: Whether the unit is powered by battery or AC,
the 5828/5828V may take a few seconds to display
and/or annunciate the new status after pressing the [✱]
key.
On AC powered units you can get the status by viewing
the display. The keypad is automatically updated when
a change in system status takes place (arming,
disarming, trouble, etc.).
HOW TO PROGRAM OR CHANGE YOUR 4-DIGIT
SECURITY CODE IF USING QUICK KEY FUNCTIONS
In order to Quick Arm the system using this keypad,
you will need to program your own 4-digit security code
into the keypad. This code must match a code that has
already been programmed into your control panel. To
program the 4-digit code, perform the following steps:
5828V
ONLY
A
OFF
MAX
AWAY
TEST
CODE
STAY
BYPASS
CHIME
1
4
7
2
5
8
0
3
6
9
#
B
1. Press the 7 INSTANT and 9 CHIME keys at the
same time until the display flashes double dashes
(- -), then release.
INSTANT
READY
C
D
2. Enter the 4-digit security code that matches a valid
user code already programmed into your control
panel. Do NOT use the Duress Code. There will be
no display of the numbers you pressed.
5828V-00-006-V0
5828V Keypad with Front Cover Removed
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
•
•
•
Do NOT use the 5828/5828V to put the LYNX into
Speaker Phone mode.
GENERAL NOTES
•
If the keypad is on battery power, it will go into
battery-saver mode (become inactive) in 15 seconds
with no key presses, even if exit delay is set to a
longer time period.
There is no audio indication when you turn on or off
lights (X10) using the 5828V.
A wireless keypad low battery condition is displayed
as “BAT” and “00” on the 5828/5828V keypad.
You would have to press the [✱] key to view (or hear)
the new status of the security system.
Anticipated battery life of the keypad batteries is 1.5
years.
•
When arming in the MAXIMUM mode, the keypad
will indicate “AWAY INSTANT.” When arming in
the INSTANT mode, the keypad will indicate “STAY
INSTANT.”
Do NOT use the 5828V for silent panic operation
because the keypad itself is not silent.
Your Honeywell security system is designed for use with devices manufactured or approved by Honeywell for use with
your security system. Your Honeywell security system is not designed for use with any device that may be attached to
your security system's keypad or other communicating bus if Honeywell has not approved such device for use with your
security system. Use of any such unauthorized device may cause damage or compromise the performance of your
security system and affect the validity of your Honeywell limited warranty. When you purchase devices that have been
manufactured or approved by Honeywell, you acquire the assurance that these devices have been thoroughly tested to
ensure optimum performance when used with your Honeywell security system.
ONE YEAR LIMITED WARRANTY
Honeywell International Inc., acting through its Security & Custom Electronics business ("Seller"), 165 Eileen Way,
Syosset, New York 11791, warrants its security equipment (the "product") to be free from defects in materials and
workmanship for one year from date of original purchase, under normal use and service. Seller's obligation is limited to
repairing or replacing, at its option, free of charge for parts, labor, or transportation, any product proven to be defective
in materials or workmanship under normal use and service. Seller shall have no obligation under this warranty or
otherwise if the product is altered or improperly repaired or serviced by anyone other than the Seller. In case of defect,
contact the security professional who installed and maintains your security equipment or the Seller for product repair.
This one year Limited Warranty is in lieu of all other express warranties, obligations or liabilities. THERE ARE NO
EXPRESS WARRANTIES, WHICH EXTEND BEYOND THE FACE HEREOF. ANY IMPLIED WARRANTIES,
OBLIGATIONS OR LIABILITIES MADE BY SELLER IN CONNECTION WITH THIS PRODUCT, INCLUDING ANY
IMPLIED WARRANTY OF MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE OR OTHERWISE,
ARE LIMITED IN DURATION TO A PERIOD OF ONE YEAR FROM THE DATE OF ORIGINAL PURCHASE. ANY
ACTION FOR BREACH OF ANY WARRANTY, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF
MERCHANTABILITY, MUST BE BROUGHT WITHIN 12 MONTHS FROM DATE OF ORIGINAL PURCHASE. IN NO
CASE SHALL SELLER BE LIABLE TO ANYONE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR
BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, OR UPON ANY OTHER BASIS OF
LIABILITY WHATSOEVER, EVEN IF THE LOSS OR DAMAGE IS CAUSED BY THE SELLER'S OWN NEGLIGENCE
OR FAULT. Some states do not allow limitation on how long an implied warranty lasts or the exclusion or limitation of
incidental or consequential damages, so the above limitation or exclusion may not apply to you.
Seller does not represent that the product may not be compromised or circumvented; that the product will prevent any
personal injury or property loss by burglary, robbery, fire or otherwise; or that the product will in all cases provide
adequate warning or protection. Buyer understands that a properly installed and maintained alarm may only reduce the
risk of a burglary, robbery, fire or other events occurring without providing an alarm, but it is not insurance or a guaran-
tee that such will not occur or that there will be no personal injury or property loss as a result. CONSEQUENTLY,
SELLER SHALL HAVE NO LIABILITY FOR ANY PERSONAL INJURY, PROPERTY DAMAGE OR OTHER LOSS
BASED ON A CLAIM THE PRODUCT FAILED TO GIVE WARNING. HOWEVER, IF SELLER IS HELD LIABLE,
WHETHER DIRECTLY OR INDIRECTLY, FOR ANY LOSS OR DAMAGE ARISING UNDER THIS LIMITED
WARRANTY OR OTHERWISE, REGARDLESS OF CAUSE OR ORIGIN, SELLER'S MAXIMUM LIABILITY SHALL
NOT IN ANY CASE EXCEED THE PURCHASE PRICE OF THE PRODUCT, WHICH SHALL BE THE COMPLETE
AND EXCLUSIVE REMEDY AGAINST SELLER. This warranty gives you specific legal rights, and you may also have
other rights, which vary from state to state. No increase or alteration, written or verbal, to this warranty is authorized.
- 3 -
Download from Www.Somanuals.com. All Manuals Search And Download.
FCC STATEMENT
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) This device must accept any interference received, including interference
that may cause undesired operation.
165 Eileen Way, Syosset, New York 11791
Copyright © 2004 Honeywell International Inc.
ÊK0021V2*Š
K0021V2 2/06 Rev. A
Download from Www.Somanuals.com. All Manuals Search And Download.
|