TABLE OF CONTENTS
INTRODUCTION
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
PRODUCT FEATURES
BEFORE YOU BEGIN
BATTERY INSTALLATION
PRODUCT OVERVIEW
WEATHER RADIO
Honeywell
RN507 & PRC507W
CUSTOMIZING YOUR WEATHER RADIO
WWVB RADIO CONTROLLED TIME
ATOMIC CLOCK
Public Alert Atomic Clock Radio
PROJECTION (PRC507W Only)
ALARM SETTING
DIGITAL RADIO
SNOOZE & BACKLIGHT
PRECAUTIONS
APPENDIX 1
APPENDIX 2
SPECIFICATIONS
FCC STATEMENT
DECLARATION OF CONFORMITY
STANDARD WARRANTY INFORMATION
(PCR507 shown)
USER MANUAL
Version Date: July 13, 2007
2
Download from Www.Somanuals.com. All Manuals Search And Download.
- Flash for 60 seconds when alert is received
•
Connect 9V AC/DC adapter provided to the main display unit and
plug into the power outlet.
WATCH,
ADVISTORY
A1. Projection Clock
(PCR507 Only)
B. WEATHER RADIO
DISPLAY
- Projects atomic clock time on to wall or
ceiling
NOTE: The Weather Radio segment operates at frequency band from
162.400MHz to 162.500MHz and requires AC/ DC adapter connected
at all times. Emergency situations where power is not available to
maximize operation with batteries, turn the FM radio OFF. Maximum
operational period on batteries only, is typically 72 hours.
- Reflects Weather Radio modes selection
and radio signal reception status
- Displays time with seconds and US map
- Displays month, date and day of the week
abbreviation
C. TIME &
NOTE: Continuous projection requires the AC/ DC adapter.
CALENDAR
WINDOW
PRODUCT OVERVIEW
D
- Displays a maximum of 18 FM radio stations
at the corresponding band and channel
D. DIGITAL RADIO
WINDOW
FRONT VIEW
F5
A
- Displays indoor temperature and alarms
E. TEMPERATURE
AND ALARM
WINDOW
B
- Weather Radio Control. Toggles between
auto and manual radio modes
- Allows programming all radio modes
- Weather Radio Control. Selects the next or
following mode
F1. MENU/SELECT
C
F2
F1
F4
F2. UP
- Weather Radio Control. Selects the previous
mode
F3. DOWN
F4. RIGHT
F5. LEFT
F3
- Weather Radio Control. Allows displaying
and changing FIPS codes
- Weather Radio Control. Exits from the
programming mode
E
A1
- Weather Radio events indicators – Warning
(Red), Watch (Orange) and Advisory (Yellow)
A. WARNING,
5
6
5
Download from Www.Somanuals.com. All Manuals Search And Download.
(PCR507W)
clockwise or anticlockwise
REAR VIEW
A1
I
- Allows adjusting the projected image
sharpness
N. FOCUS KNOB
(PCR507W)
- Flips the projected image 180° degrees
- Activates a rotation between projected time
and indoor temperature
- Allows connecting clock with the power outlet
through the AC adapter provided
O. FLIP BUTTON
(PCR507W)
M
N
O
P. AC/ DC ADAPTOR
INPUT
G
H
J
K
L
TOP VIEW
Q R S
T
U
V
A1
P
- Activates or deactivates alarm 1
- Selection of radio sound or beep sound
- Activates or deactivates alarm 1
- Selection of radio sound or beep sound
- Toggles between degree C/ degree F
- Enforces atomic time reception
G. ALARM 1
H. ALARM 2
I. ℃/℉ & WAVE
BUTTON
- Turning on or off the radio
Q. RADIO BUTTON
R. MODE BUTTON
- Increases all function parameters
- Allows toggling between 12 and 24 hour time
format
- Activates US Time Zone selection
- Decreases all function parameters
- Activates a language selection mode for the
day of the week
- Activates a continuous projection of the time
or indoor temperature (PCR507W)
J. UP/ ZONE/ 12-24
BUTTON
- Toggles between Alarm 1, Alarm 2 and indoor
temperature
- Manual time setting
- Stores favorite radio stations in 18 memory
locations
S. MEMORY
BUTTON
K. DOWN/ LANG
BUTTON
- Activates Weather Radio audio for listening
to the broadcast
- Activates backlight for 5 seconds and snooze
function
T. WEATHER/
SNOOZE
L. CONTINUOUS
PROJECTION
M. ROTATE KNOB
BUTTON
- Allows rotating of the projected image
7
8
7
Download from Www.Somanuals.com. All Manuals Search And Download.
will start scanning through all 7 NOAA channels. If the reception is
successful, it will detect and lock on the available channel.
- Toggles among the 18 preset radio station
and radio station program setting
U. STATION
BUTTON
WEATHER RADIO
- Sleeping mode setting
V. SLEEP BUTTON
ABOUT THE NATIONAL WEATHER RADIO SYSTEM
SIDE VIEW
The National Weather Service (NWS) is a government agency within the
National Oceanic and Atmospheric Administration (NOAA) that operates
the nationwide radio network known as NOAA Weather Radio (NWR).
NWR is a nationwide radio stations network continuously broadcasting
information about all types of hazardous events both environmental and
technological. Broadcasts consist of local, regional and marine weather
conditions & forecasts that are repeated every few minutes. During
emergencies, routine broadcasts are interrupted to report specific
warnings.
W
X
NWR works with the Federal Communications Commission’s (FCC)
Emergency Alert System (EAS), to provide the most complete, single
source of nationwide weather and emergency information.
Y
Z
As a nationwide network, the NWR consists of over 940 transmitters in all
50 US states, adjacent coastal waters, Puerto Rico, the US Virgin Islands
and US Pacific Territories. This network also includes Weather Radio
Canada which is a part of Meteorological Service of Canada (MSC).
When the NWR broadcasts specific warning, a digital code of Specific
Area Message Encoding (SAME) is included as part of the message. The
SAME code consists of specific information containing the geographical
area affected, the expiration time of the message and the message itself.
Your Weather Radio has been designed to receive and decode warning,
watch or non-emergency messages that are broadcast in digital SAME
code by the National Weather service. Once received, the message will
be presented visually and by voice announcement. The SAME code
contains the type of message, country(s) affected, and message
expiration time. Your radio should provide reception for up to 40 miles
distant from the NWR transmitter depending on terrain and man made
structures, either of which can reduce that distance.
- Selection of the desired sound volume
- Selection of the desired frequency
W. VOLUME KNOB
X. TUNNING KNOB
- Enables or disables audible Weather Radio
Y. ALERT ON/ OFF
SLIDE SWITCH
Z. HEADPHONE
JACK
alerts
- Jack for headphone or auxiliary/volume
speaker
You can customize the radio to only receive event messages occurring in
your specific location. You can program up to nine (9) specific county
locations based on system FIPS (Federal Information Processing
Standard) codes you have entered into the radio memory.
OPERATION
Once the unit is powered, it will show all available LCD display segments.
The Weather Radio display line will remain blank for 2 seconds. Then,
SIGNAL LOSS statement with RF reception icon will appear and radio
NOTE: For customizing your Weather Radio use the Weather Radio
Control Panel buttons located on the front of the main unit.
9
10
9
Download from Www.Somanuals.com. All Manuals Search And Download.
CUSTOMIZING YOUR WEATHER RADIO
COUNTRY SELECTION (US or Canada)
Weather Radio allows selecting and programming of several different
features, including the weather radio channel, country, language of the
events (alerts), alerts, location, signal reminder, alert reminder and alert
mode.
•
Press MENU/SELECT button entering into the programming
mode. Continue button presses until SELECT CH is displayed
Press ▲button until the SET COUNTRY message is displayed
Press MENU/SELECT button to enter country programming
mode
•
•
CHANNEL SEARCH
•
•
Press ▲ or ▼ to select either the US or Canada
Press MENU/SELECT button to confirm – the unit will beep once
confirming the country selection
There are two options available for searching of NWR channels – an auto
and manual.
The default channel search mode is auto.
•
Press ◄ to exit
If an auto search is selected, leave the Weather Radio in the default
mode after the main unit has been powered. Then the Weather Radio will
scan automatically through all 7 NOAA frequencies (channels) and lock
on the strongest available channel.
LANGUAGE SELECTION
•
•
•
Press MENU/SELECT button entering into the programming
When an auto search is selected and reception is successful, the
Weather Radio will display the number of the received channel (for
example: CHANNEL 7).
If no channel is detected at this time, the message NO CHANNEL
AVAILABLE BACK TO CHANNEL X will be displayed.
mode until SELECT CH message is displayed
Press ▲or ▼buttons until the SET LANGUAGE message is
displayed
Press MENU/SELECT button to enter language programming
mode
•
•
Press ▲ or ▼ selecting English, Spanish or French
Press MENU/SELECT button to confirm – the unit will beep once
confirming the language selection
If a manual search is selected, follow this programming procedure:
•
•
•
•
Press MENU/SELECT button until message MANUAL is
displayed
Press MENU/SELECT once entering into the channel search
programming mode – a channel number will be displayed
Press ▲ or ▼ adjusting the desired channel number - 1 through
7
•
Press ◄ to exit
ALERTS SELECTION
Your Weather Radio contains all NWR events (alerts) pre-programmed;
many of them are set to ON by default.
There are three events (alerts) categories may be displayed – Advisory,
Watch or Warning
Advisory- an advisory is issued when a hazardous weather or hydrologic
event is occurring, imminent or likely. Advisories are for less serious
conditions than warnings, which cause significant inconvenience and if
caution is not exercised, could lead to situations that may threaten life or
property.
Watch –potential severe weather approaching your area. It does not
mean severe weather occur, but that the right conditions exist which could
lead to severe storms. You should be prepared for the weather to
deteriorate rapidly.
Warning –severe weather is imminent or present in your vicinity. You
should immediately take precautions to protect yourself and your family.
Press WEATHER/SNOOZE button on the main unit to listen a
NWR broadcast – the icon NOAA will be displayed next to the
reception status icon [ ]
•
Press ◄ to exit
NOTE: If your Weather Radio is receiving a NWR broadcast on more
than one channel, the one with the best reception may not be the
best option for your location. Contact NWS for information
regarding broadcasting stations locations.
To contact the NWS by telephone, dial 1-888-NWR-SAME
(1-888-697-7263)
To obtain NWS radio channels and SAME codes on Internet:
11
12
11
Download from Www.Somanuals.com. All Manuals Search And Download.
option permits alert signals for up to 9 pre-programmed locations
only.
Refer to Appendix 2 for a list of NWS events (alerts) to determine the
events you would like to receive and those to disable.
To select ALL locations in your area:
Use this procedure for programming Weather Radio alerts:
•
•
Press ▲or ▼button to select ALL from the internal list
When ALL is displayed in the window, press MENU/SELECT
button to confirm ALL locations
•
•
•
Press MENU/SELECT button entering into the programming
mode until SELECT CH message is displayed
Press ▲or ▼button until the SET ALERTS? message will be
displayed
•
Press ◄ to exit location programming
Press MENU/SELECT button entering into the alerts
programming mode
To select a Single location, SAME alert signals for only one
programmed location:
•
•
Press ▲ or ▼ selecting ADVISORY, WATCH or WARNING
Press MENU/SELECT button to select the event type – the first
specific event will be scrolling on the display
Press ▲or ▼button selecting ALERT ON or ALERT OFF
Press MENU/SELECT button to select and confirm the setting
Press ◄ to exit
•
•
•
Press ▲or ▼button to select SINGLE from the internal list
Press MENU/SELECT button to confirm single location
Press MENU/SELECT button – the message EDIT? will be
displayed. You can now select to edit or delete a single location
Press MENU/SELECT button to select EDIT or DELETE. If you
want to edit the county location, press ► after county name is
displayed.
•
•
•
•
PROGRAMMING YOUR LOCATION
•
Press ▲or ▼button to select a new state and county from the
internal list
Press MENU/SELECT button to select and confirm the setting
Press ◄ to exit
Your Weather Radio is pre-programmed to receive seven NOAA
broadcast frequencies (channel1-7):
•
•
NOAA Radio Channels
To select Multiple locations, up to 9 stored locations:
1
2
3
4
5
6
7
•
•
•
•
Press ▲or ▼button to select MULTIPLE from the internal list
Press MENU/SELECT button to confirm
Press ▲or ▼button to view the 9 EMPTY memory locations
Press MENU/SELECT button – the message EDIT? will be
displayed. You can now select to edit (add) or delete a single
county location
162.400MHz 162.425MHz 162.450MHz 162.475MHz 162.500MHz 162.525MHz 162.550MHz
After the strongest available channel has been detected by your Weather
Radio, all FIPS codes specific for your location (state and county) are
automatically pre-set.
You can customize your radio and program it with FIPS codes to listen for
only those events that you are interested in. You can enable advisories,
watch and warnings, to report only on events that are happening in your
surrounding location for example.
•
•
Press ▲or ▼button to select: EDIT? or DELETE?
Press MENU/SELECT button and select EDIT If you want to add
or change a location.
•
•
•
•
Press ▲or ▼button selecting a state
Press MENU/SELECT button
Programming Locations
Press ▲or ▼button selecting a county
•
Press MENU/SELECT button mode until SELECT CH message
is displayed
Press ▲or ▼button until LOCATION message is displayed
Press MENU/SELECT button to enter location programming
mode
Press ▲ or ▼ to select from the following three options: ALL, to
receive messages from all counties within a 40 mile radius,
SINGLE to receive only your county information or MULTIPLE
Press MENU/SELECT button to select and confirm the setting.
Repeat above steps as many times as desired, to fill up to 9 or
fewer locations
•
•
•
Press ◄ to exit
•
NOTE: The Weather Radio may miss alerts while being programmed.
When selecting an empty location after adding a specific county or
area to the memory, press◄ once to select a county from a
13
14
13
Download from Www.Somanuals.com. All Manuals Search And Download.
previously selected state. Press ◄ again to select another state.
The Weather Radio will also permit FIPS code updates to the
location name. If the new entered FIPS code does not match the
NOAA list, the message NOT FOUND will be displayed instead of the
county name.
NOTE: Press any button to mute the missed alert reminder
ALERT MODE SELECTION
If ◄ pressed when the cursor is at the farthest left digit of the FIPS
code, your change will not be saved.
There are two options available for the alert type – voice or tone.
If the VOICE option is selected, the alert sounds for 1o seconds and then
the weather broadcast will turn on automatically for five (5) minutes. The
Weather Radio display will reflect alert description and duration.
If the TONE option is selected, the alert tone will sound for five (5)
minutes. The Weather Radio display will reflect an alert description and
duration.
SIGNAL LOSS REMINDER
•
•
•
Press MENU/SELECT button entering into the programming
mode until SELECT CH message is displayed
Press ▲or ▼button until the SIG REMINDER message is
displayed
To mute the alert tone sooner, press WEATHER/SNOOZE button on the
top of the main unit.
Press MENU/SELECT button to activate it or deactivate the
signal loss reminder - the unit will beep and display (‧) when
•
Press MENU/SELECT button entering into the programming
mode until ALERT MODE message is displayed
Press ▲button until the ALERT MODE message is displayed
Press MENU/SELECT button entering into the alert type
programming mode
activated and
when deactivated.
•
•
•
Press ◄ to exit
NOTE: If the signal is lost, the SIGNAL LOSS message will appear
with the reception icon [ ] flashing. The WARNING, WATCH and
ADVISORY indicators will periodically flash. If the signal has been
detected and lost within 10 minutes, no signal loss reminder will
sound.
•
•
Press ▲ or ▼ selecting tone or voice
Press MENU/SELECT button to confirm – the unit will beep once
confirming the alert type selection
Press ◄ to exit
•
ACTIVATING OR DEACTIVATING AUDIBLE ALERTS
MISSED ALERT REMINDER PROGRAMMING
For activating audible alerts slide the ALERT ON/OFF (N) switch to ON
position.
When the missed alert reminder is set for a TONE mode, your Weather
Radio will beep every 30 seconds after the end of the alert broadcast,
until the effective time of the alert will expire.
When missed alert reminder is set for a VOICE mode, a voice alert will
broadcast for up to 5 minutes. Then radio will beep every 30 seconds until
the effective time of the alert will expire.
When alert is received, it will sound and the alert speaker sound icon ((‧))
will appear on the display.
For deactivating audible alerts slide the ALERT ON/OFF (N) switch to
OFF position – the radio will beep twice and the speaker icon
line through it will appear.
with a
•
•
•
Press MENU/SELECT button entering into the programming
mode until SELECT CH message is displayed
Press ▲or ▼button until the ALT REMINDER message is
displayed
NOTE: If the switch ALERT ON/OFF is in OFF position before unit is
powered, the radio will still operate in ALERT ON mode until you slide
ALERT ON/OFF to ON position and OFF again.
Press MENU/SELECT button to activate it or deactivate the alert
loss reminder – the unit will beep and display a flashing speaker
TESTING YOUR WEATHER RADIO
Every Wednesday between 11 AM and 1PM the NWS broadcasts a
weekly test alert in the United States. To find out the specific test
schedule in your area, contact your local NOAA or NWS office. On your
icon ((‧)) when activated and a speaker icon
when
deactivated
Press ◄ to exit
15
•
16
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Weather Radio these alerts are turned off. To change your alert settings,
please see ALERT SELECTION section. For a list of NWS alerts see
APPENDIX 2.
continue to search for the atomic time signal daily for every hour between
1:00 am and 4:30 am.
Once the time signal has been successfully received, the time and date
will be updated automatically.
WWVB RADIO CONTROLLED TIME
To enable or disable the atomic time receiver:
The NIST (National Institute of Standards and Technology) radio station
(WWVB) is located in Ft. Collins, Colorado. It transmits an exact time
signal continuously throughout the most of the continental United States
at 60 KHz frequency. The Atomic Time Clock in your Weather Station can
receive this WWVB signal through the internal antenna from up to 2,000
miles away. Due to the nature of the Earth’s ionosphere, reception can be
limited during the daylight hours. The radio controlled clock will search for
an alternate station that receives the atomic time signal from the NIST
Atomic clock in Boulder, Colorado.
The WWVB tower icon on the unit’s display will flash indicating a radio
signal reception from the WWVB station. If the tower icon is not fully lit, or
if the time and date are not set automatically, please consider the
following:
•
Press and hold UP - if atomic time reception is activated, a
circular tower icon will start flashing next to the clock icon. If
reception is disabled, the circular tower icon will disappear.
Icon
(flashing)
Atomic Time Reception Strength
Undefined data
(without circle)
(one circle)
Reception failed for the past 24 hours
Weak signal, but can be decoded
Strong signal
•
During night-time hours, atmospheric disturbances are typically
less severe and radio signal reception may improve. A single
daily reception is sufficient enough to keep the clock accuracy
within 1 second.
ATOMIC CLOCK
Immediately after batteries installation, the clock will beep and display all
available LCD segments for a moment. Immediately after the atomic time
signal receiver will start searching for the atomic time signal. It usually
takes between 5-8 minutes.
•
•
Make sure the unit is positioned at 8 feet (2 meters) distance
from any interference source such as a TV, computer monitor,
microwave, etc.
Within concrete wall rooms such as basements or office buildings,
the received signal may be weakened. Always place the unit near
the window for better reception.
NOTE: Do not press any buttons on the unit during auto search as it
may interrupt product’s operation, and you will need to start the set
up procedure again.
Once the atomic time signal is received, the date and time will be set
automatically, and the icon will appear.
NOTE: At the time of the initial reception allow at least 24 hours for
the atomic time receiver to pick up the signal. In some cases,
depending on the location, it may take up to 72 hours
If the reception is successful and the atomic time signal is received, the
date and time will be set automatically, and the
the display.
icon will appear on
If the initial reception was not successful and the time signal has not been
received in this first 8 minutes, you may use the MODE button to set the
time and date manually. (Refer to the MANUAL SETTINGS section).
After the clock is set manually, place the main unit by the window for
better reception. The atomic clock receiver is programmed that it will
17
NOTE: It is necessary to set your Time Zone, having in mind that the
18
17
Download from Www.Somanuals.com. All Manuals Search And Download.
default zone is a Pacific Standard Time (PST). (Refer to a MANUAL
SETTINGS section)
CLOCK
•
Press and hold MODE button for 3 seconds until the year digits
in the Calendar Window will flash
TEMPERATURE AND ALARM WINDOW
The Temperature and Alarm Window displays an indoor temperature
and two time alarms. Press the MODE button to select among indoor
temperature, Alarm 1 and Alarm 2. Press the ℃/℉ button to change the
temperature unit between degree Celsius and degree Fahrenheit. (The
default display is in degree Fahrenheit.)
•
•
Press UP or DOWN adjusting a correct year
Press MODE to confirm and move to the next parameter – the
month digit will flash
•
•
•
•
•
Press UP or DOWN adjusting the current month and then press
MODE to confirm – the date digit will flash
Press UP or DOWN adjusting the date and then press MODE to
confirm – the “M” and “D” digits will flash
TIME AND CALENDAR WINDOWS
The Atomic Clock displays time in an hour-minutes-seconds format in
the Time Window located below the Temperature and Alarm Window.
The date is displayed in month-date format next to the day of the week
and moon phase icon in the Calendar Window.
Press UP of DOWN selecting the calendar display format in M/ D
or D/ M - the hour digit will flash in the Time Window
Press UP or DOWN adjusting the hour and then press MODE to
confirm – the minutes will flash
Press UP or DOWN adjusting the minutes and then press MODE
for the last time to confirm after the last parameter is set
MANUAL SETTINGS
If desired, the time, date and other available parameters can be
programmed manually. It is necessary to set your Time Zone manually.
DAY OF THE WEEK LANGUAGE
•
Press and hold LANG button for 3 seconds to enter into the day
of the week language programming mode: the default language
abbreviation will appear (example – EN)
TIME ZONE
•
Enter the US Time Zone programming mode by pressing and
holding the UP button for 3 seconds.
•
•
Continue holding LANG button until the desired day of the week
language abbreviation is displayed
•
Keep holding UP button until the desired time zone (Pacific,
Mountain, Central or Eastern) is highlighted on the unit’s display
map in the Time Window
Release the LANG button and the day of the week will be
displayed in selected language
•
Release the UP button and the desired Time Zone will be
selected
19
20
19
Download from Www.Somanuals.com. All Manuals Search And Download.
PROJECTION (PCR507W) Only
ALARM SETTING
The Atomic Projection Clock is capable of projecting the information
The Atomic Clock Radio has two time alarms. If any of the alarms is
activated, it will sound at the set time and the alarm icon will flash. Also,
you can select the alarm in radio sound or beep sound by switching to the
desired position.
immediately, as well as continuously.
IMMEDIATE PROJECTION
•
Press SNOOZE/LIGHT button once to project the current time
image for five seconds.
BELL ALARM SETTING
•
Slide the alarm switch to the ALARM position. The alarm icons of
and will be shown on the display.
•
Press MODE button to view the ALARM 1 or ALARM 2 modes.
If the ALARM 1 is selected, the default time “6:00” with the AL
label will be displayed. If the ALARM 2 is selected, the default
time”8:00”with the AL 2 label will be displayed
•
•
Press FLIP button to rotate projected image 180° clockwise
•
Press and hold the MODE button for two seconds - the hour digit
will flash
•
•
•
•
•
Enter the hour parameter by using DOWN or UP button
Press the MODE button again, then the minute digits will flash
Enter the minutes parameter by using DOWN or UP button
Press the MODE button one last time to confirm the setting.
Use the same procedure for setting the time for ALARM 2
Press and hold FLIP button for 2 seconds again and the
projected image will rotate between the time and indoor
temperature information every 5 seconds
CONTINUOUS TIME AND TEMPERATURE PROJECTION
•
Connect AC/DC adapter provided to the AC adapter input
RADIO ALARM SETTING
•
Slide the alarm switch to the RADIO position. The alarm icons of
and will be shown on the display.
•
Press MODE button to view the ALARM 1 or ALARM 2 modes.
If the ALARM 1 is selected, the default time “6:00” with the AL
label will be displayed. If the ALARM 2 is selected, the default
time”8:00”with the AL 2 label will be displayed
•
Slide the CONTINUE PROJECTION switch to the arrow direction
shown on the unit’s side: the current time will be projected on the
wall or the ceiling continuously.
•
Press and hold the MODE button for 3 seconds - the hour digit
21
22
21
Download from Www.Somanuals.com. All Manuals Search And Download.
will flash and the radio display will be on.
RADIO STATION PROGRAM SETTING
•
Press STATION button to select the station that you want to be
your wake up station
Your favorable station can be set in the radio station program. Quick
searching of radio station can be done by selection of preset station
number.
•
•
•
•
•
Enter the hour parameter by using DOWN or UP button
Press the MODE button again, then the minute digits will flash
Enter the minutes parameter by using DOWN or UP button
Press the MODE button one last time to confirm the setting.
Use the same procedure for setting the time for ALARM 2
•
•
•
Press RADIO button once to turn on the radio.
Rotate TUNNING knob to search the desired radio station.
Press MEMORY button until the station number is flashing on the
display.
HOW TO STOP AN ALARM
Slide the alarm switch to the OFF position, alarms will be
disabled and the alarm icons will disappear from the display.
•
Press STATION button to select the desired station number.
There are total 18 stations can be set in the program.
Press MEMORY button once more to confirm
Then, you can press STATION button only to find your preset
favorable radio station.
•
•
•
DIGITAL FM RADIO
The band range of FM Radio is operated from 87.5 to 108.1 MHz.
GENERAL OPERATION
SLEEPING MODE SETTING
You can use sleeping mode turn off the radio automatically.
•
Press RADIO button (On top) to turn on the radio. The current
frequency selection will be shown on the LCD display.
Rotate TUNNING knob (side) to select the desired radio station.
Each step of rotation will increase or decrease the frequency by
0.05MHz. Rapid rotation of TUNNING knob will jump to the next
closest station automatically.
•
Press SLEEP button to activate sleeping mode. “SLEEP” will
flash when the sleep mode is activated.
•
•
Press SLEEP again to select the radio shut down time from 5 to
90 minutes maximum. Each press of SLEEP button decreases
the shut down time by 5 minutes. The default value is 90 minutes.
After setting, the display will change back to station frequency.
The radio will shut down automatically when the pre-set time is
reached.
•
•
•
Rotate VOLUME knob to adjust the desired volume. There are
total 15 steps of volume. The midrange default value is 6.
If the reception is weak, extend the antenna to improve the
reception.
•
•
Press LIGHT/ SNOOZE button to stop sleeping mode and radio
will turn off automatically.
Press RADIO button to turn off the radio. The radio functions will
automatically turn off when the low battery indicator displayed,
unless connected to the AC adapter.
23
24
23
Download from Www.Somanuals.com. All Manuals Search And Download.
HEADPHONE SPEAKERS
APPENDIX 1 – CITY CODES
Headphone can be used when you connect the headphone (not included)
into the headphone jack. This jack can also support computer style
speakers and provide additional volume control for the weather radio, if
desired.
US and Canadian Cities
Cod
ATL
AUS
BWI
BHM
BOS
YYC
CGX
CVG
CLE
CMH
DAL
DEN
DTW
ELP
HOU
IND
Zone
-5
-6
-5
-6
-5
-7
-6
-5
-5
-5
-6
-7
-5
-7
-6
-5
-5
-8
-8
-8
-6
-5
-5
Cod
MEM
MIA
Zone
-6
-5
-6
-6
-5
-6
-6
-5
-6
-6
-5
-5
-7
-5
-8
-6
-8
-8
-8
-8
-5
-8
City
DST
SU
SU
SU
SU
SU
SU
SU
SU
SU
SU
SU
SU
SU
SU
SU
NO
SU
SU
SU
SU
SU
SU
SU
City
DST
SU
SU
SU
SU
SU
SU
SU
SU
SU
SU
SU
SU
NO
SU
SU
SU
SU
SU
SU
SU
SU
SU
Atlanta, Ga.
Memphis, Tenn.
Miami, Fla.
Austin, TX
Baltimore, Md.
Birmingham, Ala.
Boston, Mass.
Calgary, Alba.,
Chicago, IL
Milwaukee, Wis.
Minneapolis, Minn.
Montreal, Que., Can.
Nashville, Tenn.
New Orleans, La.
New York, N.Y.
MKE
MSP
YMX
BNA
MSY
NYC
OKC
OMA
YOW
PHL
PHX
PIT
SNOOZE & BACKLIGHT
Press the SNOOZE/LIGHT button to temporarily stop any alarm. After the
SNOOZE /LIGHT button is depressed, the alarm sound will resume in the
programmed snooze period and the blue backlight will be activated for 5
seconds. If the alarm is not disabled after that, it will sound for four more
minutes and then will stop by itself. There is no continuous back light.
Cincinnati, Ohio
Cleveland, Ohio
Columbus, Ohio
Dallas, Tex.
Oklahoma City, Okla.
Omaha, Neb.
Ottawa, Ont., Can.
Philadelphia, Pa.
Phoenix, Ariz.
Denver, Colo.
Detroit, Mich.
El Paso, Tex.
Houston, Tex.
Indianapolis, Ind.
Jacksonville, Fla.
Las Vegas, Nev.
Los Angeles,
Seattle, Wash.
St. Louis, Mo.
Tampa, Fla.
PRECAUTIONS
This product is engineered to give you years of satisfactory service if
Pittsburgh, Pa.
Portland, Ore.
PDX
SAT
SAN
SFO
SJC
YVR
DCA
VAC
San Antonio, Tex.
San Diego, Calif.
San Francisco, Calif.
San Jose, Calif.
Vancouver, B.C., Can.
Washington, D.C.
Vancouver, Canada
handled carefully. Here are a few precautions:
JAX
LAS
LAX
SEA
STL
TPA
YTZ
•
•
Do not immerse the unit in water.
Do not clean the unit with abrasive or corrosive materials. They
may scratch the plastic parts and corrode the electronic circuits.
Do not subject the product to excessive force, shock, dust,
temperature, or humidity, which may result in malfunctions,
shorter lifespan, damaged batteries, and damaged parts.
Do not tamper with the unit’s internal components. Doing so will
invalidate the warranty and may cause damage. The unit
contains no user-serviceable parts.
•
•
Toronto, Ont.,
•
•
Use only fresh batteries. Do not mix new and old batteries.
Read the user's manual thoroughly before operating the unit.
25
26
25
Download from Www.Somanuals.com. All Manuals Search And Download.
SE
NO
NO
SE
NO
SE
NO
SA
NO
NO
SE
SE
SE
Munich, Germany MUC
1
3
Sydney, Australia
Tokyo, Japan
SYD
TKO
TRP
VIE
10
9
World Cities
Nairobi, Kenya
Nanjing
NBO
NKG
NAP
DEL
ODS
KIX
8
Tripoli, Libya
2
Cod
ADD
ADL
ALG
AMS
AKR
ASU
ATH
BKK
BCN
BEJ
Time
3
Cod
CAI
Time
2
City
DST
NO
SA
NO
SE
SE
sp
City
Cairo, Egypt
DST
sg
Naples, Italy
1
Vienna, Austria
Warsaw, Poland
Zürich, Switzerland
1
Addis Ababa,
Adelaide,
WA
New Delhi, India
Odessa, Ukraine
Osaka, Japan
5.5
2
1
Calcutta, India (as
Cape Town, South Africa
Caracas, Venezuela
Chihuahua, Mexico
Copenhagen, Denmark
Córdoba, Argentina
Dakar, Senegal
NO
NO
NO
SU
SE
NO
NO
SE
NO
SE
SE
NO
SE
SH
SE
NO
SK
NO
NO
NO
SE
NO
SE
NO
SE
NO
NO
sb
9.5
1
CCU
CPT
CCS
CUU
CPH
COR
DKR
DUB
DUR
FRA
GLA
GUA
HAM
HAV
HEL
HKG
IKT
5.5
2
ZRH
1
Algiers, Algeria
Amsterdam,
Ankara, Turkey
Asunción,
9
1
-4
-6
1
2
DST (Daylight Savings Time) definitions:
-3
2
SA = Australian DST.
SE
NO
SE
NO
SE
SE
SE
NO
SE
SE
NO
SE
SE
SE
NO
NO
NO
NO
NO
SE
SE
SE
SE
SE
NO
SE
SA
SU
SE
SM
SK
Athens, Greece
Bangkok,
-3
0
SB = South Brazilian DST - changes annually.
SC = Chile DST
7
Barcelona, Spain
Beijing, China
Belgrade,
1
Dublin, Ireland
0
SE = Standard European DST.
SG = Egypt DST
SH = Havana, Cuba DST
8
Durban, South Africa
Frankfurt, Germany
Glasgow, Scotland
Guatemala City,
2
BEG
BER
BHX
1
1
Berlin, Germany
Birmingham,
1
0
SI = Iraq and Syria DST
0
-6
1
SK = Irkutsk & Moscow DST
SM = Montevideo, Uruguay DST
SN = Namibia DST
Bogotá, Colombia BOG
Bordeaux, France BOD
-5
1
Hamburg, Germany
Havana, Cuba
-5
2
SP = Paraguay DST
Bremen,
BRE
1
Helsinki, Finland
Hong Kong, China
Irkutsk, Russia
SQ = Iran DST maybe changed annually.
ST = Tasmania DST
Brisbane,
BNE
10
1
8
Brussels, Belgium BRU
8
SU = Standard American DST.
SZ = New Zealand DST
Bucharest,
BBU
2
Jakarta, Indonesia
Johannesburg, South
Kingston, Jamaica
Oslo, Norway
JKT
7
Budapest,
BUD
1
JNB
KIN
2
NO DST = no = Places that do not observe DST;
ON = Always add 1 hour to the local standard time
Buenos Aires,
BUA
-3
1
-5
1
Kinshasa, Congo
Kuala Lumpur,
La Paz, Bolivia
Lima, Peru
FIH
OSL
PTY
PAR
PER
PRG
RGN
RKV
RIO
KUL
LPB
LIM
8
Panama City, Panama
Paris, France
-5
1
-4
-5
0
Perth, Australia
8
Lisbon, Portugal
Liverpool,
LIS
Prague, Czech Republic
Rangoon, Myanmar
Reykjavík, Iceland
Rio de Janeiro, Brazil
Rome, Italy
1
LPL
LON
LYO
MAD
MNL
MRS
MEL
MEX
MIL
0
6.5
0
London, England
Lyon, France
Madrid, Spain
Manila,
0
1
-3
1
SE
NO
sc
1
ROM
SSA
SCL
SPL
SHA
SIN
8
Salvador, Brazil
-3
-4
-3
8
Marseille, France
Melbourne,
1
Santiago, Chile
sb
10
-6
1
São Paulo, Brazil
Shanghai, China
Singapore, Singapore
Sofia, Bulgaria
Mexico City,
Milan, Italy
NO
NO
SE
SE
8
Montevideo,
Moscow, Russia
MVD
MO
-3
3
SOF
ARN
2
Stockholm Arlanda,
1
27
28
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Event Code
Level
Warning On
Watch On
Default
APPENDIX 2 – NWR ALERT MESSAGES
Flash Flood Warning
Flood Watch
Event Code
Level
Advisory Off
Watch On
Default
Administrative Message
Avalanche Watch
Flood Statement
Advisory On
Warning On
Warning On
Warning On
Warning On
Advisory On
Warning On *
Flood Warning
Avalanche Warning
Warning On
Warning On *
Warning On
Warning On
Advisory On
Warning On *
Warning On *
Fire Warning
Biological Hazard Warning
Boil Water Warning
Flash Freeze Warning
Freeze Warning
Blizzard Warning
Hurricane Statement
Hazardous Materials Warning
Hurricane Watch
Child Abduction Emergency
Civil Danger Warning
Civil Emergency Message
Costal Flood Watch
Watch
Warning On *
Watch On
On
Hurricane Warning
Watch
On
High Wind Watch
Costal Flood Warning
Chemical Hazard Warning
Contaminated Water Warning
Dam Watch
Warning On
Warning On *
Warning On *
High Wind Warning
Iceberg Warning
Warning On
Warning On
Warning On *
Advisory On *
Warning On *
Warning On *
Advisory Off
Advisory Off
Advisory Off
Advisory Off
Advisory Off
Warning On *
Advisory On
Warning On *
Advisory Off
Industrial Fire Warning
Local Area Emergency
Law Enforcement Warning
Land Slide Warning
National Audible Test
National Information Center
Network Notification Message
National Periodic Test
National Silent Test
Nuclear Power Plant Warning
Power Outage Advisory
Radiological Hazard Warning
Required Monthly Test
Watch
On
Dam Break Warning
Contagious Disease Warning
Practice/ Demo
Warning On *
Warning On *
Advisory Off
Warning On
Dust Storm Warning
Emergency Action Notification
Emergency Action Termination
Earthquake Warning
Immediate Evacuation
Evacuation Watch
Warning On *
Advisory On *
Warning On *
Warning On *
Watch
Warning On *
Watch On
Advisory On
On
Food Contamination Warning
Flash Flood Watch
Flash Flood Statement
29
30
29
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Event Code
Level
Default
Required Weekly Test
Special Marine Warning
Special Weather Statement
Shelter In-Place Warning
Severe Thunderstorm Watch
Severe Thunderstorm Warning
Severe Weather Statement
Tornado Watch
Advisory Off
Warning On
Advisory On
Warning On *
Weather Radio
Radio Frequency Band: from 162.400MHz to 162.500MHz
Operating Range: about 40 miles (65 km) radius
Channels: Digital PLL tuning for 7 NOAA channels
SAME programming: All, MULTIPLE (for 9 counties) or SINGLE
Volume: 16 levels
Watch
On
Receiving Sensitivity: 100 db V/m
Warning On
Advisory On
FIPS/CLC Codes Sensitivity: 0.5 u/V
Signal to Noise Ratio: 45 dB
Channel Selectivity: 50 dB
Watch
On
Digital Radio
911 Telephone Outage Emergency Advisory On
FM frequency: 87.5 to 108 MHz at step frequency 50 KHz
Volume step: 15 (Digital: 0-15, default: 6)
Max. Stored Stations: 18
Tornado Warning
Warning On *
Watch On
Warning On *
Watch On *
Tropical Storm Watch
Tropical Storm Warning
Tsunami Watch
Time
12/24 hour display in hh: mm format
Date format: month – day
User-selectable US Time Zone
Tsunami Warning
Warning On *
Advisory Off
Advisory Off
Advisory Off
Advisory Off
Warning On *
Warning On
Warning On *
Day of the week: Selectable: English, Spanish or French Languages
Dual 4 minutes crescendo alarm with programmable snooze
Transmitter Backup On
Transmitter Carrier Off
Transmitter Carrier On
Transmitter Primary On
Volcano Warning
Indoor Temperature
Operating range: -5.0°C to +50.0°C/23.0°F to 122.0°F
Temperature resolution: 0.1°C/0.2°F
User-selectable (F° or C°) temperature display
LED backlight: 5 seconds
Low battery indicator
Wild Fire Watch
Projection (PPCR507W)
Focus adjustment
180° projected image rotation and flip
Wild Fire Warning
Winter Storm Watch
Winter Storm Warning
Unrecognized Watch
Unrecognized Emergency
Unrecognized Statement
Unrecognized Warning
Watch
Warning On
Watch On
On
Power
6 AA size (UM-3) 1.5V batteries (not included)
AC/DC adapter - 9V, 120mA (included)
Advisory On
Advisory On
Warning On *
Dimensions
(PCR507W) 8.9(L) x 6.26(H) x 2.32(D) inches
(RN507W) 8.9(L) x 6.26(H) x 2.32(D) inches
31
32
31
Download from Www.Somanuals.com. All Manuals Search And Download.
STANDARD WARRANTY INFORMATION
FCC STATEMENT
This product is warranted from manufacturing defects for one year from
the date of retail purchase. It does not cover damages or wear resulting
from accident, misuse, abuse, commercial use, or unauthorized
adjustment and repair.
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation.
Warning: Changes or modification to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE: This equipment had been tested and found to comply with the
limits for a Class B Digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment, installed
and used in accordance with the instructions, may cause harmful
interference to radio communications.
Note that online product registration is required to ensure valid warranty
protection.
To register your product, go to our Company website at:
www.honeywellweatherstations.com. Click Online Product Registration
under the Customer Service menu.
Should you require assistance with this product and its operation, please
contact our Customer Service Hotline 1(866) 443 3543.
Please direct all returns to the place of the original purchase. Should this
not be possible, contact Hideki Customer Service Hotline for assistance
and to obtain a Return Merchandise Authorization (RMA). Returns without
a return authorization will be refused. Please retain your original receipt
as you may be asked to provide a copy for proof of purchase.
Hideki Electronics, Inc. reserves the right to repair or replace the product
at our option.
Copyright (2007) Hideki Electronics Inc. All Rights Reserved. The
Honeywell Trademark is used under license from Honeywell Intellectual
Properties Inc.
Honeywell International Inc. makes no representations or warranties with
respect to this product.
All user manual contents and information are subject to change.
There is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment
off and on, the user is encouraged to improve or correct turning the
interference by one or more of the following measures:
•
•
•
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio / TV technician for
help.
•
DECLARATION OF CONFORMITY
Name: Hideki Electronics, Inc.
Address: 7865 SW Mohawk, Tualatin, OR 97062
Telephone No.: 1 503 612 8395
declare that the product
Product No.: PCR507W
Product Name: Honeywell Public Alert Projection Clock Radio
Manufacturer: Hideki Electronics Ltd.
Address: Unit 2304-06, 23/F Riley House, 88 Lei Muk Road, Kwai Chung,
New Territories, Hong Kong
is in conformity with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
This device may not cause harmful interference.
This device must accept any interference received, including interference
that may cause undesired operation.
33
34
33
Download from Www.Somanuals.com. All Manuals Search And Download.
|