IS3480 QuantumE
QuantumT 3580
Fusion 3780
Orbit 7120/7180
Solaris 7820
Quick Start Guide
Pre slovenčinu choď na www.honeywellaidc.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Turn off the computer’s power before connecting
the scanner, then power up the computer once the
scanner is fully connected.
Scanner Host Ports
Fusion 3780
QuantumT 3580
IS3480 QuantumE
Orbit 7120/7180
Solaris 7820
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Scanner
Connect to
scanner’s host
port
USB
Serial
(RS232)
Connect to
scanner’s host
port
Keyboard
Wedge
Connect to
scanner’shost
port
optional
adapter cable
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Recall Defaults
Scan Recall Defaults to reset all standard product
default settings.
³
9 9 9 9 9 8
Recall Defaults
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Interface Selections
USB
³
4 1 6 4 0 0
USB Keyboard
Emulation
³
9 9 9 9 7 0
Load Integrated Full
Speed USB IBM/OEM
Defaults
³
4 1 6 4 1 4 0
USB Serial Emulation
4
Download from Www.Somanuals.com. All Manuals Search And Download.
RS232
³
4 1 5 5 5 4
RS232
Keyboard Wedge
³
5 1 5 5 1 4 3
Keyboard Wedge Emulation
Keyboard Country
Scan a bar code to select one of the following
keyboard country templates. Refer to your
Configuration Guide for additional keyboard country
settings.
³
4 1 6 2 6 0
United States
5
Download from Www.Somanuals.com. All Manuals Search And Download.
³
4 1 6 2 0 0
Belgium
³
4 1 6 2 1 0
United Kingdom
³
4 1 6 2 3 0
Germany/Austria
³
4 1 6 2 2 0
France
6
Download from Www.Somanuals.com. All Manuals Search And Download.
³
4 1 6 2 4 0
Italy
³
4 1 6 2 5 0
Spain
ALT Mode
Use ALT Mode when bar codes or formatting rules
include Extended ASCII data that might not have a
direct keyboard equivalent. If your bar code
contains special characters from the extended
ASCII chart, scan the Enable 3-digit ALT Mode or
Enable 4-digit ALT Mode codes below. The key
sequence based on the ASCII value would be sent
to the host (e.g., if an asterisk (*) is contained in the
bar code, the host receives ALT + 0 + 4 + 2 (3-digit).
If an “Ü” is contained in the bar code, the host
receives ALT + 0 + 2 + 2 + 0 (4-digit). You may also
se ALT Mode when no "Keyboard Country" bar
code that matches your keyboard exists.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: Scan ALT mode after scanning the
appropriate Keyboard Country code.
³
1 1 6 2 1 7
Enable 3-digit ALT Mode
³
1 1 6 2 0 7
Disable 3-digit ALT Mode
³
1 1 6 7 1 6
Enable 4-digit ALT Mode
³
1 1 6 7 0 6
Disable 4-digit ALT Mode
8
Download from Www.Somanuals.com. All Manuals Search And Download.
RS232 Communication Commands
³
1 1 5 8 1 6
RTS/CTS
Handshaking On
³
1 1 5 9 1 4
XON/XOFF On
³
1 1 5 9 1 3
ACK/NAK On
³
1 1 6 0 1 3
8 Data Bits
9
Download from Www.Somanuals.com. All Manuals Search And Download.
³
1 1 6 0 1 4
1 Stop Bit
³
3 1 6 0 4 5
No Parity
Power Save Modes
Scan the following bar codes to have the scanner to
enter/exit from various power save modes.
³
3 1 9 4 1 0
Blink
10
Download from Www.Somanuals.com. All Manuals Search And Download.
³
3 1 9 4 2 0
Laser Off Power Save
³
3 1 9 4 3 0
Laser and Motor Off
Power Save
³
1 1 8 6 1 7
Power Save Mode Always
³
8 1 8 6 0 0
Power Save Mode Never
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Host Scanner Commands
Scan the Enable D/E Disable bar code below to
disable scanning after the scanner receives an
ASCII “D” from the host. Scanning is enabled when
the scanner receives and ASCII “E”.
³
1 1 8 0 1 5
Enable D/E Disable
³
1 1 8 0 0 5
Disable D/E Disable
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Scan the Activate DC2 Character bar code below
initiate scanning with the receipt of a DC2 character
(^R, 124).
³
1 1 8 1 1 0
Activate DC2 Character
³
1 1 8 1 0 0
Do Not Activate
DC2 Character
Scanning the Transmit Serial Number code
transmits the scanner’s serial number.
³
9 9 9 9 6 9
Transmit Serial Number
13
Download from Www.Somanuals.com. All Manuals Search And Download.
LED Options
Scan the Laser LED Off/Scan LED Off bar code to
turn off the laser/scan LED while scanning bar
codes. The LEDs continue to illuminate for all other
functions.
³
2 4 3 1 3 0
Laser LED Off
³
2 4 3 1 3 2
Scan LED Off
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Prefix
Scan one of the following bar codes to program
your scanner to add or remove a start of text
character, or AIM, NCR, or Nixdorf identification
characters before each bar code.
³
1 1 6 6 1 5
STX Prefix On
³
1 1 6 6 0 5
STX Prefix Off
³
1 0 7 9 1 5
AIM ID Prefix On
15
Download from Www.Somanuals.com. All Manuals Search And Download.
³
1 0 7 9 0 5
AIM ID Prefix Off
³
1 0 7 9 1 1
NCR Prefix On
³
1 0 7 9 0 1
NCR Prefix Off
³
1 0 7 9 1 7
Nixdorf Prefix On
16
Download from Www.Somanuals.com. All Manuals Search And Download.
³
1 0 7 9 0 7
Nixdorf Prefix Off
Suffix
Scan one of the following bar codes to program
your scanner to add or remove a carriage return,
line feed, tab, or end of text after each bar code.
³
1 1 6 6 1 3
CR Suffix On
³
1 1 6 6 0 3
CR Suffix Off
17
Download from Www.Somanuals.com. All Manuals Search And Download.
³
1 1 6 6 1 2
LF Suffix On
³
1 1 6 6 0 2
LF Suffix Off
³
1 1 6 6 1 0
Tab Suffix On
³
1 1 6 6 0 0
Tab Suffix Off
18
Download from Www.Somanuals.com. All Manuals Search And Download.
³
1 1 6 6 1 4
ETX Suffix On
³
1 1 6 6 0 4
ETX Suffix Off
User Configurable Prefix/Suffix
One or two prefix or suffix characters can be added
and assigned for data transmission. Use one of the
codes below with a 3 code byte sequence that
represents the desired character (see ASCII
Conversion Chart, end of document) for your prefix
or suffix. (To add additional prefix/suffix characters,
refer to your Single-Line Configuration Guide.)
Scan the Enter/Exit Programming bar code to
begin. Then scan the 3 digit decimal equivalent of
the ASCII character into the appropriate character
location with the code byte bar codes (see Code
Bytes, end of document). To save, scan the Enter/
Exit Programming bar code again.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Example: To add an asterisk (*) as a prefix, scan
the bar codes:
1. Enter/Exit Programming
2. Configurable Prefix #1
3. Code Byte 0
4. Code Byte 4
5. Code Byte 2
6. Enter/Exit Programming
³
9 9 9 9 9 9
Enter/Exit Programming
³
9 0 3 5 0 0
Configurable Prefix #1
20
Download from Www.Somanuals.com. All Manuals Search And Download.
³
9 0 3 6 0 0
Configurable Prefix #2
³
9 0 4 5 0 0
Configurable Suffix #1
³
9 0 4 6 0 0
Configurable Suffix #2
Supplements
Scan one of the bar codes below to program your
scanner for 2 or 5 digit bar code supplements.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
³
1 0 1 2 1 7
2 Digit Supplements
On
³
1 0 1 2 0 7
2 Digit Supplements Off
³
1 0 1 2 1 6
5 Digit Supplements
On
³
1 0 1 2 0 6
5 Digit Supplements Off
22
Download from Www.Somanuals.com. All Manuals Search And Download.
977 (2 Digit) Supplement Required: Turn on this
feature when a 2 digit supplement is required for
EAN-13 codes that begin with 977.
³
1 0 1 3 1 4
977 Supplements On
³
1 0 1 3 0 4
977 Supplements Off
23
Download from Www.Somanuals.com. All Manuals Search And Download.
UPC/EAN Formatting
Scan Convert UPC-A to EAN-13 and a leading
zero is transmitted before a UPC-A bar code to
convert it to EAN-13.
³
1 0 7 5 1 4
Convert UPC-A to
EAN-13
³
1 0 7 5 0 4
Don’tConvertUPC-Ato
EAN-13
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Scan Transmit Lead Zero on UPC-E to transmit a
zero before each UPC-E bar code.
³
1 0 7 5 1 3
Transmit Lead Zero on
UPC-E
³
1 0 7 5 0 3
Don’t Transmit Lead
Zero on UPC-E
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Scan Transmit UPC-A Number System to
transmit the UPC-A leading digit with the bar code
data. To transmit just the data, without the leading
digit, scan Don’t Transmit UPC-A Number
System.
³
1 0 7 5 1 1
Transmit UPC-A
Number System
³
1 0 7 5 0 1
Don’t Transmit UPC-A
Number System
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Expand UPC-E to 12 Digits expands the UPC-E
code to the 12 digit, UPC-A format.
³
1 0 7 5 1 5
Expand UPC-E to 12
Digits
³
1 0 7 5 0 5
Don’t Expand UPC-E to
12 Digits
27
Download from Www.Somanuals.com. All Manuals Search And Download.
When Code 39 Full ASCII On is scanned, certain
character pairs within the bar code symbol will be
interpreted as a single character. For example: $V
will be decoded as the ASCII character SYN, and /
C will be decoded as the ASCII character #.
³
1 0 0 2 1 7
Code 39 Full ASCII On
³
1 0 0 2 0 7
Code 39 Full ASCII Off
Check Digits
The following selections allow you to specify
whether the check digit should be transmitted at the
end of the scanned UPC-A or UPC-E data.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
³
1 0 7 5 1 7
*Transmit UPC-A
Check Digits
³
1 0 7 5 0 7
Don’t Transmit UPC-A
Check Digits
³
1 0 7 5 1 6
Transmit UPC-E Check
Digits
³
1 0 7 5 0 6
*Don’t Transmit UPC-E
Check Digits
29
Download from Www.Somanuals.com. All Manuals Search And Download.
GS1 Symbology
Due to the large spaces commonly found in GS1
DataBar symbologies, it is recommended that you
enable GS1 Double Border Required. Scan the
other codes below to enable/disable GS1 Databar
14 and GS1 Limited.
³
1 0 0 0 1 1
GS1 Double Border
Required
³
1 0 0 4 1 3
Enable GS1 Databar 14
³
1 0 0 4 0 3
Disable GS1 Databar 14
30
Download from Www.Somanuals.com. All Manuals Search And Download.
³
1 0 0 4 1 4
Enable GS1 Limited
³
1 0 0 4 0 4
Disable GS1 Limited
Host Configurations
Scan one of the following codes, then scan the
Recall Defaults code, to program the scanner for
one of the following configurations.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
³ 8 4 6 6 1 2 8 0
Verifone® Ruby Terminal
Defaults
³ 8 4 6 6 0 0 3 0
Gilbarco® Terminal
Defaults
³ 8 4 6 6 0 1 4 0
Wincor Nixdorf Terminal
Defaults
³
9 9 9 9 9 8
Recall Defaults
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Miscellaneous
Minimum Symbol Length specifies the minimum
number of characters allowable for non-UPC/EAN
bar codes. Scan the Enter/Exit Programming bar
code to begin. Scan Minimum Symbol Length,
then scan the minimum number of characters
allowed using code byte bar codes, below. To
save, scan the Enter/Exit Programming bar code
again.
³
9 9 9 9 9 9
Enter/Exit Programming
³
9 0 1 8 0 0
Minimum Symbol Length
33
Download from Www.Somanuals.com. All Manuals Search And Download.
³
4
³
5
³
6
³
7
35
Download from Www.Somanuals.com. All Manuals Search And Download.
³
8
³
9
36
Download from Www.Somanuals.com. All Manuals Search And Download.
ASCII Conversion Chart
Dec Hex
Char Dec
Hex
Char Dec
Hex
Char Dec Hex Char Dec Hex Char
0
00
01
02
03
04
05
06
07
08
09
0A
0B
0C
0D
0E
0F
10
11
12
13
14
15
16
17
18
19
NUL
SOH
STX
ETX
EOT
ENQ
ACK
BEL
BS
1A
SUB
ESC
FS
34
4
5
6
7
8
9
:
4E
4F
50
51
52
53
54
55
56
57
58
59
5A
5B
5C
5D
5E
5F
60
61
62
63
64
65
66
67
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
[
68
69
6A
6B
6C
6D
6E
6F
70
71
72
73
74
75
76
77
78
79
7A
7B
7C
7D
7E
7F
h
i
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
1B
1C
1D
1E
1F
20
21
22
23
24
25
26
27
28
29
2A
2B
2C
2D
2E
2F
30
31
32
33
35
36
37
38
39
3A
3B
3C
3D
3E
3F
40
41
42
43
44
45
46
47
48
49
4A
4B
4C
4D
1
j
2
GS
k
l
3
RS
4
US
m
n
o
p
q
r
5
6
!
;
7
“
#
$
%
&
‘
<
=
>
?
8
HT
9
LF
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
VT
s
t
FF
@
A
B
C
D
E
F
CR
u
v
w
x
y
z
{
SO
(
\
SI
)
]
DLE
DC1
DC2
DC3
DC4
NAK
SYN
ETB
CAN
EM
*
^
_
‘
+
,
-
G
H
l
a
b
c
d
e
f
.
|
/
}
0
1
2
3
J
~
K
L
M
g
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Patents
For patent information, please refer to
Technical Assistance
Contact information for technical support, product service,
Limited Warranty
for your product’s warranty information.
User Documentation
For localized versions of this document, and to download
the Configuration Guide or the Installation and User’s
Disclaimer
Honeywell International Inc. (“HII”) reserves the right to
make changes in specifications and other information
contained in this document without prior notice, and the
reader should in all cases consult HII to determine
whether any such changes have been made. The
information in this publication does not represent a
commitment on the part of HII.
HII shall not be liable for technical or editorial errors or
omissions contained herein; nor for incidental or
consequential damages resulting from the furnishing,
performance, or use of this material.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
This document contains proprietary information that is
protected by copyright. All rights are reserved. No part of
this document may be photocopied, reproduced, or
translated into another language without the prior written
consent of HII.
© 2012 Honeywell International Inc. All rights reserved.
Web Address: www.honeywellaidc.com
39
Download from Www.Somanuals.com. All Manuals Search And Download.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Honeywell Scanning & Mobility
9680 Old Bailes Road
Fort Mill, SC 29707
Omni-QS Rev A
05/12
Download from Www.Somanuals.com. All Manuals Search And Download.
|