Model No. HREX2076.1
Serial No.
USER’S MANUAL
Write the serial number in the
space above for reference.
Serial
Number
Decal
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete cus-
tomer satisfaction. If you have
questions, or if parts are dam-
aged or missing, PLEASE DO
NOT CONTACT THE STORE;
please contact Customer Care.
IMPORTANT: You must note the
product model number and
serial number (see the drawing
above) before contacting us:
CALL TOLL-FREE:
1-888-922-4222
Mon.–Fri., 6 a.m.–6 p.m. MST
Sat. 8 a.m.–4 p.m. MST
ON THE WEB:
CAUTION
Visit our website at
Read all precautions and instruc-
tions in this manual before using
this equipment. Keep this manual
for future reference.
new products, prizes,
fitness tips, and much more!
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT PRECAUTIONS
WARNING:
To reduce the risk of serious injury, read all important precautions and
instructions in this manual and all warnings on your exercise cycle before using your exercise
cycle. ICON assumes no responsibility for personal injury or property damage sustained by or
through the use of this product.
1. Before beginning any exercise program, con- 8. The pulse sensor is not a medical device.
sult your physician. This is especially impor-
tant for persons over the age of 35 or per-
sons with pre-existing health problems.
Various factors, including the user's move-
ment, may affect the accuracy of heart rate
readings. The pulse sensor is intended only
as an exercise aid in determining heart rate
trends in general.
2. It is the responsibility of the owner to ensure
that all users of the exercise cycle are ade-
quately informed of all precautions.
9. Wear appropriate exercise clothes while
exercising; do not wear loose clothes that
could become caught on your exercise cycle.
Always wear athletic shoes for foot protec-
tion while exercising.
3. Your exercise cycle is intended for home use
only. Do not use your exercise cycle in a
commercial, rental, or institutional setting.
4. Keep your exercise cycle indoors, away from
moisture and dust. Place your exercise cycle
on a level surface, with a mat beneath it to
protect the floor or carpet. Make sure that
there is enough clearance around your exer-
cise cycle to mount, dismount, and use it.
10. Keep your back straight while using your
exercise cycle; do not arch your back.
11. When you stop exercising, allow the pedals
to slowly come to a stop.
12. If you feel pain or dizziness while exercising,
stop immediately and cool down.
5. Inspect and properly tighten all parts regu-
larly. Replace any worn parts immediately.
13. Use your exercise cycle only as described in
this manual.
6. Keep children under age 12 and pets away
from your exercise cycle at all times.
7. Your exercise cycle should not be used by
persons weighing more than 250 lbs.
(113 kg).
3
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE YOU BEGIN
®
Thank you for selecting the new HEALTHRIDER N35
exercise cycle. Cycling is one of the most effective
exercises for increasing cardiovascular fitness, building
endurance, and toning the body. The N35 exercise
cycle offers a selection of features designed to let you
enjoy this healthful exercise in the convenience and
privacy of your home.
model number and serial number before contacting
us. The model number and the location of the serial
number decal are shown on the front cover of this
manual.
To avoid a registration fee for any service needed
under warranty, you must register the exercise
For your benefit, read this manual carefully before
you use the exercise cycle. If you have questions
after reading this manual, please see the front cover
of this manual. To help us assist you, note the product
Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.
Fan
Console
Pulse Sensor
Pedal/Strap
Seat
Adjustment Knob
Handlebar
Wheel
4
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY
To hire an authorized service technician to assemble the exercise cycle, call 1-800-445-2480.
Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the pack-
ing materials. Do not dispose of the packing materials until assembly is completed. In addition to the included
hex keys, assembly requires a Phillips screwdriver
and an adjustable wrench
.
As you assemble the exercise cycle, use the drawings below to identify small parts. The number in parentheses
below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number
following the key number is the quantity needed for assembly. Note: Some small parts may have been pre-
assembled. If a part is not in the hardware kit, check to see if it has been preassembled.
M6 Washer
(55)–8
M8 Nylon
M10 Nylon
M8 Split
Locknut (60)–4
Locknut (63)–4
Washer (59)–5
M4 x 16mm
Round Head
Screw (52)–4
M6 x 42mm Button
Screw (49)–4
M6 x 38mm Button
Screw (48)–4
M8 x 25mm Button
Screw (33)–3
M8 x 70mm Button
Bolt (54)–2
M10 x 75mm Carriage Bolt (51)–4
5
Download from Www.Somanuals.com. All Manuals Search And Download.
1.
1
To make assembly easier, read the information
on page 5 before you begin assembling the
exercise cycle.
3
51
While another person lifts the front of the Frame (1),
attach the Front Stabilizer (3) to the Frame with two
M10 x 75mm Carriage Bolts (51) and two M10
Nylon Locknuts (63).
1
17
63
60
See the inset drawing. Loosen the Adjustment Knob
(17), slide the Rear Frame (2) out of the Frame (1),
and then retighten the Adjustment Knob.
1
2
2. Attach the Wheels (18) to the Rear Stabilizer (4)
with two M8 Nylon Locknuts (60). Press a Wheel
Cap (19) onto each Wheel.
2
19
63
4
Attach the Rear Stabilizer (4) to the Rear Frame (2)
with two M10 x 75mm Carriage Bolts (51) and two
M10 Nylon Locknuts (63).
2
18
63
60
51
19
18
3. Attach the Seat Frame (7) to the Handlebar (6) with
two M8 x 70mm Button Bolts (54), two M8 Split
Washers (59), and two M8 Nylon Locknuts (60). Do
not tighten the Button Bolts yet.
3
59
54
59
7
6
60
6
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Attach the Backrest (5) to the Seat Frame (7) with
four M6 x 38mm Button Screws (48) and four M6
Washers (55). Do not tighten the Button Screws
yet.
4
5
55
48
7
55
48
5. Have another person hold the Seat Frame (7) under
the Rear Frame (2) as shown. Attach the Seat
Frame and the Seat (12) to the Rear Frame with
four M6 x 42mm Button Screws (49) and four M6
Washers (55).
5
12
See step 3. Tighten the two M8 x 70mm Button
2
Bolts (54).
See step 4. Tighten the four M6 x 38mm Button
Screws (48).
55
7
55
49
55
49
6. The Console (16) requires four “D” batteries (not
included); alkaline batteries are recommended.
IMPORTANT: If the exercise cycle has been
exposed to cold temperatures, allow it to warm
to room temperature before inserting batteries
into the Console. If you do not do this, the con-
sole displays or other electronic components
may become damaged. Press the tab on the bat-
tery door and remove it. Insert four batteries into
the Console as shown. Make sure that the batter-
ies are oriented as shown by the diagram on the
battery door. Then, reattach the battery door.
6
16
Batteries
Tab
Battery Door
7
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Connect the console wire harness to the Upper
Wire Harness (36). Insert the console wire harness
into the Upright (13). Attach the Console (16) to the
Upright with four M4 x 16mm Round Head Screws
(52).
7
Console
Wire
Harness
52
16
36
13
8. Connect the Upper Wire Harness (36) to the Lower
Wire Harness (8). Attach the Upright (13) to the
Frame (1) with three M8 x 25mm Button Screws
(33) and three M8 Split Washers (59). Be careful
to avoid pinching the Wire Harnesses.
8
13
36
8
33
59
33
59
1
33
8
Download from Www.Somanuals.com. All Manuals Search And Download.
9. Identify the Left Pedal (24), which is marked with a
“Left” sticker. Firmly tighten the Left Pedal counter-
clockwise into the left arm of the Crank (31).
Tighten the Right Pedal (not shown) clockwise into
the right arm of the Crank. IMPORTANT: Tighten
both Pedals as firmly as possible. After using
the exercise cycle for one week, retighten the
Pedals. For best performance, keep the Pedals
tightened.
9
31
25
Adjust the Left Pedal Strap (25) to the desired posi-
tion, and press the end of the Left Pedal Strap onto
the tab on the Left Pedal (24). Adjust the Right
Pedal Strap (not shown) in the same way.
24
Tab
10. Make sure that all parts are properly tightened before you use the exercise cycle. Note: Some hardware
may be left over after assembly is completed. Place a mat beneath the exercise cycle to protect the floor.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO OPERATE THE EXERCISE CYCLE
HOW TO ADJUST THE SEAT
12
After the exercise cycle is assembled, adjust the Seat
(12) to the proper position. As you pedal, there should
be a slight bend in your knees when the pedals are in
the farthest forward position. Loosen the Adjustment
Knob (17), slide the Rear Frame (2) forward or back-
ward in the Frame (1), and then tighten the Adjustment
Knob.
17
1
2
10
Download from Www.Somanuals.com. All Manuals Search And Download.
DIAGRAM OF THE CONSOLE
Increase
Button
Fan
Program
Profiles
Button
Program Button
Program
Indicator
Display
Pace
Decrease
Button
Guide
FEATURES OF THE CONSOLE
HOW TO USE THE MANUAL MODE
1. Turn on the console.
This advanced console offers a selection of features
designed to make your workouts more effective. When
you use the manual mode of the console, you can
change the resistance of the pedals with the touch of
a button. As you pedal, the console will provide contin-
uous exercise feedback. You can even measure your
heart rate using the built-in handgrip pulse sensor.
To turn on the console, press the Increase button
or begin pedaling. The pace guide will light for a
moment; the console will then be ready for use.
2. Select the manual mode.
The console also offers five preset programs that
automatically change the resistance of the pedals and
prompt you to vary your pedaling pace while guiding
you through an effective workout.
When you turn on the console, the manual mode
will be selected. If you have selected a program,
reselect the manual mode by pressing the
Program button repeatedly until no program indi-
cators (see the drawing above) appear along the
left side of the display.
To use the manual mode of the console, see the
instructions at the right. To use a preset program,
see page 13.
3. Change the resistance of the pedals as
desired.
Before using the console, make sure that batteries are
installed (see assembly step 6 on page 7). If there is a
sheet of clear plastic on the display, remove the plas-
tic.
As you pedal,
change the resis-
tance of the pedals
by pressing the
Increase and
Decrease buttons.
There are ten resis-
tance levels. Note: After you press the buttons, it
will take a moment for the pedals to reach the
selected resistance level.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
4.
Follow your progress with the display.
shaped indicator in the lower half of the display
will flash each time your heart beats, and then
your heart rate will appear in the display.
The upper half of
the display will show
the elapsed time,
For the most accurate heart rate reading, continue
to hold the handgrip pulse sensor for about 30
seconds. Note: If you continue to hold the hand-
grip pulse sensor, the display will show your heart
rate for about 30 seconds. The display will then
show your heart rate along with the other modes.
the distance you
have pedaled, and
the resistance level
of the pedals. The
display will change modes every few seconds.
Note: When a preset program is selected, the dis-
play will show the time remaining in the program
instead of the elapsed time.
If your heart rate does not appear, make sure that
your hands are positioned as described. Avoid
moving your hands excessively or squeezing the
metal contacts too tightly. For optimal performance,
periodically clean the metal contacts using a soft
cloth; never use alcohol, abrasives, or chemi-
cals to clean the contacts.
The lower half of the
display will show
your pedaling speed
and the approximate
number of calories
you have burned.
6. Turn on the fan if desired.
The display will
change modes every few seconds. The lower half
of the display will also show your heart rate when
you use the handgrip pulse sensor (see step 5).
To turn on the fan at low speed, press the Fan but-
ton. To turn on the fan at high speed, press the
Fan button a second time. To turn off the fan,
press the Fan button a third time. Note: If the fan
is turned on but the pedals do not move for thirty
seconds, the fan will automatically turn off to con-
serve the batteries.
Note: The console
can display speed
and distance in
either miles or
kilometers. The
Rotate the thumb
letters MPH or
tab on the right side
Thumb
KM/H will appear in
of the fan to adjust
Tab
the lower half of the display to indicate the selected
unit of measurement. To change the unit of mea-
surement, first hold down the Program button for
several seconds. An E (for English) or an M (for
metric) will appear in the display. Press the Increase
button to change the unit of measurement. When
the desired unit of measurement is selected, press
the Program button again. Note: When you replace
the batteries, it may be necessary to reselect the
unit of measurement.
the angle of the fan.
7. When you are finished exercising, the console
will turn off automatically.
If the pedals do not move for a few seconds, the
time will begin to flash in the display and the con-
sole will pause. If the pedals do not move for a few
minutes, the console will turn off and the display
will be reset.
5. Measure your heart rate if desired.
If there are sheets
of clear plastic on
the metal con-
tacts on the
handgrip pulse
sensor, remove
the plastic. Next,
hold the handgrip
Contacts
pulse sensor with your palms resting on the con-
tacts. When your pulse is detected, the heart-
12
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE A PRESET PROGRAM
1. Turn on the console.
your pace; when one of the two upper indicators
lights, decrease your pace. When the center indi-
cator lights, maintain your current pace. IMPOR-
TANT: The pace guide is intended only to pro-
vide a goal. Make sure to pedal at a pace that
is comfortable for you.
See step 1 on page 11.
2. Select a preset program.
To select a preset
program, press the
Program button
repeatedly until the
number 1, 2, 3, 4, or
5 appears along the
left side of the dis-
play. When you select a preset program, the dis-
play will show how long the program will last.
The display will show the time remaining in the
program. If you stop pedaling for a few seconds,
the program will pause and the time will flash in
the display. To restart the program, simply resume
pedaling.
3. Begin pedaling to start the program.
Each preset programs consists of 30 one-minute
segments. One resistance level and one target
pace are programmed for each segment.
4. Follow your progress with the display.
See step 4 on page 12.
At the end of each segment, the resistance level
will flash in the display for a few seconds. The
resistance of the pedals will then automatically
change to the resistance level programmed for the
next segment. Note: If the resistance level is too
low or too high, you can override it by pressing the
Increase and Decrease buttons. However, when
the current segment ends, the resistance will auto-
matically change to the resistance level pro-
grammed for the next segment.
5. Measure your heart rate if desired.
See step 5 on page 12.
6. Turn on the fan if desired.
See step 6 on page 12.
7. When you are finished exercising, the console
will turn off automatically.
During the program, the pace guide will prompt
you to keep your pedaling pace near the target
pace programmed for the current segment. When
one of the two lower indicators lights, increase
See step 7 on page 12.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE AND TROUBLESHOOTING
Inspect and properly tighten all parts of the exercise
cycle regularly. Replace any worn parts immediately.
With the left side shield removed, locate the Reed
Switch (43). Turn the Crank (31) until the Magnet (38)
is aligned with the Reed Switch. Next, loosen, but do
not remove, the indicated M4 x 16mm Screw (57).
Slide the Reed Switch slightly closer to or away from
the Magnet, and then retighten the Screw. Turn the
Crank for a moment. Repeat until the console displays
correct feedback. When the Reed Switch is correctly
adjusted, reattach the left side shield and the left
pedal.
To clean the exercise cycle, use a damp cloth and a
small amount of liquid dish soap. IMPORTANT: To
avoid damaging the console, keep liquids away
from the console and keep the console out of
direct sunlight.
BATTERY REPLACEMENT
If the console display becomes dim, the batteries
should be replaced; most console problems are the
result of low batteries. To replace the batteries, see
assembly step 6 on page 7.
HOW TO ADJUST THE REED SWITCH
If the console does not display correct feedback, the
reed switch should be adjusted. To adjust the reed
switch, you must first remove the Left Side Shield (9).
Using an adjustable wrench, turn the Left Pedal (24)
clockwise and remove it. Next, remove the seven M4
x 16mm Screws (57) and the M4 x 25mm Screw (45).
Then, carefully remove the Left Side Shield.
43
31
57
38
HANDGRIP PULSE SENSOR TROUBLESHOOTING
9
57
If the handgrip pulse sensor does not function properly,
see step 5 on page 12.
57
57
45
24
57
14
Download from Www.Somanuals.com. All Manuals Search And Download.
EXERCISE GUIDELINES
Burning Fat—To burn fat effectively, you must exer-
cise at a low intensity level for a sustained period of
time. During the first few minutes of exercise, your
body uses carbohydrate calories for energy. Only after
the first few minutes of exercise does your body begin
to use stored fat calories for energy. If your goal is to
burn fat, adjust the intensity of your exercise until your
heart rate is near the lowest number in your training
zone. For maximum fat burning, exercise with your
heart rate near the middle number in your training
zone.
WARNING:
Before beginning
this or any exercise program, consult your
physician. This is especially important for
persons over the age of 35 or persons with
pre-existing health problems.
The pulse sensor is not a medical device.
Various factors may affect the accuracy of
heart rate readings. The pulse sensor is
intended only as an exercise aid in determin-
ing heart rate trends in general.
Aerobic Exercise—If your goal is to strengthen your
cardiovascular system, you must perform aerobic
exercise, which is activity that requires large amounts
of oxygen for prolonged periods of time. For aerobic
exercise, adjust the intensity of your exercise until
your heart rate is near the highest number in your
training zone.
These guidelines will help you to plan your exercise
program. For detailed exercise information, obtain a
reputable book or consult your physician. Remember,
proper nutrition and adequate rest are essential for
successful results.
WORKOUT GUIDELINES
EXERCISE INTENSITY
Warming up—Start with 5 to 10 minutes of stretching
and light exercise. A warm-up increases your body
temperature, heart rate, and circulation in preparation
for exercise.
Whether your goal is to burn fat or to strengthen your
cardiovascular system, exercising at the proper inten-
sity is the key to achieving results. You can use your
heart rate as a guide to find the proper intensity level.
The chart below shows recommended heart rates for
fat burning and aerobic exercise.
Training Zone Exercise—Exercise for 20 to 30 min-
utes with your heart rate in your training zone. (During
the first few weeks of your exercise program, do not
keep your heart rate in your training zone for longer
than 20 minutes.) Breathe regularly and deeply as you
exercise–never hold your breath.
Cooling down—Finish with 5 to 10 minutes of
stretching. Stretching increases the flexibility of your
muscles and helps to prevent post-exercise problems.
EXERCISE FREQUENCY
To find the proper intensity level, find your age at the
bottom of the chart (ages are rounded off to the near-
est ten years). The three numbers listed above your
age define your “training zone.” The lowest number is
the heart rate for fat burning, the middle number is the
heart rate for maximum fat burning, and the highest
number is the heart rate for aerobic exercise.
To maintain or improve your condition, complete three
workouts each week, with at least one day of rest
between workouts. After a few months of regular exer-
cise, you may complete up to five workouts each
week, if desired. Remember, the key to success is to
make exercise a regular and enjoyable part of your
everyday life.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
SUGGESTED STRETCHES
1
The correct form for several basic stretches is shown at the right.
Move slowly as you stretch—never bounce.
1. Toe Touch Stretch
Stand with your knees bent slightly and slowly bend forward from
your hips. Allow your back and shoulders to relax as you reach
down toward your toes as far as possible. Hold for 15 counts,
then relax. Repeat 3 times. Stretches: Hamstrings, backs of
knees, and back.
2
2. Hamstring Stretch
Sit with one leg extended. Bring the sole of the opposite foot
toward you and rest it against the inner thigh of your extended
leg. Reach toward your toes as far as possible. Hold for 15
counts, then relax. Repeat 3 times for each leg. Stretches:
Hamstrings, lower back, and groin.
3
3. Calf/Achilles Stretch
With one leg in front of the other, reach forward and place your
hands against a wall. Keep your back leg straight and your back
foot flat on the floor. Bend your front leg, lean forward, and move
your hips toward the wall. Hold for 15 counts, then relax. Repeat
3 times for each leg. To cause further stretching of the achilles
tendons, bend your back leg as well. Stretches: Calves, achilles
tendons, and ankles.
4
4. Quadriceps Stretch
With one hand against a wall for balance, reach back and grasp
one foot with your other hand. Bring your heel as close to your
buttocks as possible. Hold for 15 counts, then relax. Repeat 3
times for each leg. Stretches: Quadriceps and hip muscles.
5
5. Inner Thigh Stretch
Sit with the soles of your feet together and your knees outward.
Pull your feet toward your groin as far as possible. Hold for 15
counts, then relax. Repeat 3 times. Stretches: Quadriceps and hip
muscles.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES
17
Download from Www.Somanuals.com. All Manuals Search And Download.
PART LIST—Model No. HREX2076.1
R1007A
Key No. Qty.
Description
Key No. Qty.
Description
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
3
Frame
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
*
1
1
1
2
1
2
1
1
1
1
2
3
1
1
4
4
3
4
4
1
2
8
1
12
4
5
5
6
2
4
1
–
–
Flywheel
2
Rear Frame
Front Stabilizer
Rear Stabilizer
Backrest
Crank Bearing Assembly
Upper Wire Harness
Bearing
3
4
5
Magnet
6
Handlebar
Tension Bolt
7
Seat Frame
Tension Bracket
M8 Washer
8
Lower Wire Harness
Left Side Shield
Right Side Shield
Stabilizer Endcap
Seat
9
Flywheel Washer
Reed Switch/Wire
Handlebar Endcap
M4 x 25mm Screw
Resistance Cable
Return Spring
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
Upright
Front Bushing
Rear Bushing
Console
M6 x 38mm Button Screw
M6 x 42mm Button Screw
Adjustment Knob
Wheel
M4 x 16mm Flat Head Screw
M10 x 75mm Carriage Bolt
M4 x 16mm Round Head Screw
5mm Spacer
Wheel Cap
Frame Pad
Frame Stop
M8 x 70mm Button Bolt
M6 Washer
Reed Switch Clamp
C-magnet Bracket
Left Pedal
M8 x 20mm Button Bolt
M4 x 16mm Screw
M5 Washer
Left Pedal Strap
Right Pedal
M8 Split Washer
M8 Nylon Locknut
M6 Nut
Right Pedal Strap
Resistance Motor
Flywheel Axle
Belt
M8 Jamnut
M10 Nylon Locknut
M6 x 38mm Bolt
User’s Manual
Pulley/Crank
C-magnet
M8 x 25mm Button Screw
*
Hex Key
Note: Specifications are subject to change without notice. See the back cover of this manual for information
about ordering replacement parts. *These parts are not illustrated.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
EXPLODED DRAWING—Model No. HREX2076.1
R1007A
44
54
55
59
7
5
48
57
44
55
57
48
10
6
60
12
57
55
49
57
9
55
49
55
49
55
45
49
21
57
57
19
50
63
2
60
4
18
16
63
51
33
59
18
52
59
60
33
11
19
51
52
36
3
13
22
63
57
43
29
40
35
34
42
8
37
57
61
58
57
58
11
39
37
53
62
28
35
39
41
27
1
17
30
61
50
62
31
32
47
38
24
20
23
61
46
25
14
60
26
45
15
61
64
56
19
Download from Www.Somanuals.com. All Manuals Search And Download.
ORDERING REPLACEMENT PARTS
To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to
provide the following information when contacting us:
• the model number and serial number of the product (see the front cover of this manual)
• the name of the product (see the front cover of this manual)
• the key number and description of the replacement part(s) (see the PART LIST and the EXPLODED
DRAWING near the end of this manual)
LIMITED WARRANTY
ICON Health & Fitness, Inc. (ICON) warrants this product to be free from defects in workmanship and
material, under normal use and service conditions, for a period of ninety (90) days from the date of pur-
chase. This warranty extends only to the original purchaser. ICON's obligation under this warranty is lim-
ited to replacing or repairing, at ICON's option, the product through one of its authorized service centers.
All repairs for which warranty claims are made must be pre-authorized by ICON. If the product is shipped
to a service center, freight charges to and from the service center will be the customer’s responsibility. For
in-home service, the customer will be responsible for a minimal trip charge. This warranty does not extend
to any product or damage to a product caused by or attributable to freight damage, abuse, misuse,
improper or abnormal usage or repairs not provided by an ICON authorized service center; products used
for commercial or rental purposes; or products used as store display models. No other warranty beyond
that specifically set forth above is authorized by ICON.
ICON is not responsible or liable for indirect, special or consequential damages arising out of or in con-
nection with the use or performance of the product or damages with respect to any economic loss, loss
of property, loss of revenues or profits, loss of enjoyment or use, costs of removal or installation or other
consequential damages of whatsoever nature. Some states do not allow the exclusion or limitation of inci-
dental or consequential damages. Accordingly, the above limitation may not apply to you.
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of
merchantability or fitness for a particular purpose is limited in its scope and duration to the terms set forth
herein. Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the above
limitation may not apply to you.
This warranty gives you specific legal rights. You may also have other rights which vary from state to state.
ICON HEALTH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321-9813
Part No. 260532 R1007A
Printed in China © 2007 ICON IP, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
|