Healthrider Home Gym HREX13950 User Manual

Model No. HREX1395.0  
Serial No.  
USER’S MANUAL  
Serial  
Number  
Decal  
QUESTIONS?  
As a manufacturer, we are com-  
mitted to providing complete  
customer satisfaction. If you  
have questions, or if parts are  
damaged or missing, PLEASE  
CONTACT OUR CUSTOMER  
SERVICE DEPARTMENT  
DIRECTLY.  
CALL TOLL-FREE:  
1-888-922-4222  
Mon.–Fri., 6 a.m.–6 p.m. MST  
ON THE WEB:  
CAUTION  
Visit our website at  
Read all precautions and instruc-  
tions in this manual before using  
this equipment. Keep this manual  
for future reference.  
new products, prizes,  
fitness tips, and much more!  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BEFORE YOU BEGIN  
®
Thank you for selecting the new HEALTHRIDER N25  
exercise cycle. Cycling is one of the most effective  
exercises for increasing cardiovascular fitness, building  
endurance, and toning the body. The N25 exercise  
cycle offers a selection of features designed to let you  
enjoy this healthful exercise in the convenience and  
privacy of your home.  
model number and serial number before calling. The  
model number is HREX1395.0. The serial number can  
be found on a decal attached to the exercise cycle  
(see the front cover of this manual for the location of  
the decal).  
To avoid a registration fee for any service needed  
under warranty, you must register the exercise  
For your benefit, read this manual carefully before  
you use the exercise cycle. If you have questions  
after reading this manual, please see the front cover  
of this manual. To help us assist you, note the product  
Before reading further, please familiarize yourself with  
the parts that are labeled in the drawing below.  
Console  
FRONT  
Pedal/Strap  
Wheel  
Handlebar  
Pulse Sensor  
Adjustment Knob  
Seat  
RIGHT SIDE  
REAR  
Leveling Cap  
CAUTION: The warning decal shown above has been placed on the exercise cycle in the  
location shown. If the decal is missing, or if it is not legible, call the toll-free telephone num-  
ber on the front of this manual and order a free replacement decal. Apply the decal in the  
location shown.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
ASSEMBLY  
To hire an authorized service technician to assemble the exercise cycle, call toll-free 1-800-445-2480.  
Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the pack-  
ing materials. Do not dispose of the packing materials until assembly is completed. In addition to the included  
hex keys, assembly requires a phillips screwdriver  
and an adjustable wrench  
.
As you assemble the exercise cycle, use the drawings below to identify small parts. The number in parentheses  
below each drawing is the key number of the part, from the PART LIST on page 14. The number following the  
parentheses is the quantity needed for assembly. Note: Some small parts may have been pre-assembled. If a  
part is not in the parts bag, check to see if it has been pre-assembled.  
M8 Nylon  
M8 Acorn Nut  
(11)–2  
M8 Curved  
M8 x 20mm  
M4 x 12mm  
Locknut (17)–2  
Washer (107)–7  
Washer (10)–8  
Screw (106)–4  
M8 x 70mm  
M8 x 16mm  
Bolt (87)–4  
M8 x 16mm  
Carriage Bolt (9)–2  
Screw (62)–3  
M8 x 40mm  
Screw (63)–2  
M8 x 80mm Hex  
Bolt (40)–2  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. Insert the Seat Back Support (2) into the Seat Bracket  
(3). Attach the Seat Back Support with two M8 x 80mm  
Hex Bolts (40), four M8 x 20mm Washers (10), and  
two M8 Nylon Locknuts (17).  
1
40  
10  
10  
17  
2
3
2. Attach the Handlebar (7) to the Seat Bracket (3) with  
two M8 x 40mm Screws (63) and two M8 Curved  
Washers (107). Be careful to avoid pinching the  
Pulse Wire (71).  
2
7
63  
107  
71  
107  
3
3. Slide the Seat Frame (4) partially out of the Frame (1),  
and align one of the adjustment holes in the Seat  
Frame with the indicated hole in the Frame. Next,  
tighten the Adjustment Knob (99) into the Frame.  
3
99  
Hole  
Attach the Rear Stabilizer (8) to the Seat Frame (4)  
with two M8 x 70mm Carriage Bolts (9), two M8  
Curved Washers (107), and two M8 Acorn Nuts (11).  
4
11  
1
Note: After the exercise cycle is assembled, the posi-  
tion of the Seat (not shown) should be adjusted; as you  
pedal, there should be a slight bend in your knees  
when the pedals are in the farthest forward position. To  
adjust the Seat, first turn the Adjustment Knob (99)  
counterclockwise two or three turns to loosen it. Next,  
lift the Knob, slide the Seat Frame (4) to the desired  
position, and then release the Knob. Slide the Seat  
Frame in and out slightly until the pin on the Knob  
engages one of the adjustment holes in the Seat  
Frame. Then, retighten the Knob.  
107  
11  
107  
8
9
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. Set the Seat Bracket (3) in the Seat Frame (4), and  
align the holes. Attach the Seat Bracket with four M8 x  
16mm Bolts (87) and four M8 x 20mm Washers (10).  
Be careful to avoid pinching the Pulse Wire (71).  
4
Connect the Pulse Wire (71) to the Lower Pulse Wire  
(92).  
71  
3
10  
4
87  
10  
10  
87  
92  
5. While another person holds the Upright (5) near the  
Frame (1), connect the Upper Wire Harness (77) to  
the Lower Wire Harness (66). Next, connect the Upper  
Pulse Wire (75) to the Center Pulse Wire (88). Insert  
the excess wire into the Frame.  
5
5
62  
Slide the Upright (5) onto the Frame (1). Attach the  
Upright with three M8 x 16mm Screws (62) and three  
M8 Curved Washers (107). Be careful to avoid  
pinching the wires.  
107  
107  
62  
62  
75  
88  
77  
66  
1
6. The Console (76) requires four “C” batteries (not  
included); alkaline batteries are recommended. Insert  
four batteries into the back of the Console. Make sure  
that the batteries are oriented as shown by the  
markings inside of the Console.  
6
75  
77  
76  
106  
While another person holds the Console (76) near the  
Console Bracket (6), feed the console wires through  
the large hole in the Console Bracket. Next, connect  
the console wires to the Upper Wire Harness (77) and  
the Upper Pulse Wire (75). Then, insert all wires into  
the top of the Upright (5).  
6
106  
5
Attach the Console (76) to the Console Bracket (6)  
with four M4 x 12mm Screws (106).  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
7. Identify the Left Pedal (98), which is marked with an  
“L.” Using an adjustable wrench, firmly tighten the  
Left Pedal counterclockwise into the Left Crank Arm  
(94). Tighten the Right Pedal (not shown) clockwise  
into the Right Crank Arm. Important: Tighten both  
Pedals as firmly as possible. After using the exer-  
cise cycle for one week, retighten the Pedals. For  
best performance, the Pedals must be kept tight-  
ened.  
7
Adjust the pedal straps to the desired position by  
pressing the end of each pedal strap onto the tab on  
each pedal.  
94  
Tab  
98  
8. Make sure that all parts are properly tightened before you use the exercise cycle. Note: After assembly is  
completed, some extra parts may be left over. Place a mat beneath the exercise cycle to protect the floor.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOW TO OPERATE THE EXERCISE CYCLE  
The advanced console offers a selection of features  
HOW TO USE THE MANUAL MODE  
designed to make your workouts more effective.  
During each workout, the resistance of the pedals can  
be changed with the touch of a button. As you exer-  
cise, the console will display continuous exercise feed-  
back—you can even measure your heart rate using  
the built-in handgrip pulse sensor.  
Turn on the console.  
1
2
To turn on the console, press any button.  
Select the manual mode.  
The console also features five preset workout pro-  
grams and a heart rate program. Each program auto-  
matically changes the resistance of the pedals as it  
guides you through an effective workout.  
Each time the  
console is turned  
on, the manual  
mode will be  
Note: The console requires four “C” batteries. If  
batteries have not been installed, see assembly  
step 6 on page 6. If there is a sheet of clear plastic  
on the face of the console, remove it.  
selected. If you  
have selected a  
program, select  
the manual mode  
by pressing the Up or Down button repeatedly  
until the word “Manual” appears in the display.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
repeatedly until only the TIME, DIST., or CAL.  
indicator appears in the display. Make sure that  
the SCAN indicator does not appear.  
Start your workout and adjust the resistance  
of the pedals.  
3
4
Press the  
The resistance  
bar on the left  
part of the dis-  
play will show  
the resistance  
level of the ped-  
als.  
Program  
Start/Stop but-  
ton and then  
begin pedaling.  
As you pedal,  
adjust the resis-  
tance of the  
pedals as desired by pressing the Up and Down  
buttons. There are eight resistance levels. Note:  
After the buttons are pressed, it will take a few  
seconds for the pedals to reach the selected resis-  
tance setting.  
Measure your heart rate if desired.  
Note: If there  
5
6
are sheets of  
clear plastic on  
the metal con-  
tacts on the  
Metal Contacts  
Follow your progress with the display.  
handgrip pulse  
sensor, peel off  
the plastic. To  
use the handgrip  
pulse sensor,  
After you start  
SCAN Indicator  
your workout,  
you can select  
a display mode.  
To view all  
place your hands on the metal contacts. Avoid  
moving your hands. When your pulse is detect-  
ed, the heart-shaped indicator in the display will  
flash each time your heart beats. For the most  
accurate heart rate reading, continue to hold the  
handgrips for about 15 seconds.  
modes, press  
the Mode/Enter  
button repeat-  
edly until the  
SCAN indicator appears. As you pedal, the con-  
sole will display several different modes: the  
elapsed time, your pedaling speed, the distance  
that you have pedaled, and the approximate num-  
ber of calories you have burned. In addition, the  
console will display a heart symbol when you use  
the handgrip pulse sensor and it detects your  
pulse.  
When you are finished exercising, the console  
will automatically turn off.  
If the pedals are not moved and the console but-  
tons are not pressed for a few minutes, the con-  
sole will automatically turn off to conserve the  
batteries.  
If desired, you can select a single mode for con-  
tinuous display. Press the Mode/Enter button  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Note: You can set one, two, three, or four goals  
(or no goals). For example, if you want to set only  
a time goal and a distance goal, select the num-  
ber of minutes that you plan to exercise and then  
press the Mode/Enter button. Next, select the dis-  
tance that you plan to pedal and then press the  
Mode/Enter button. Then, start the program (see  
step 4).  
HOW TO USE A WORKOUT PROGRAM  
Turn on the console.  
1
See step 1 on page 8.  
Select a workout program.  
2
Start the program.  
Each time the  
4
console is  
To start the program, press the Program  
turned on, the  
Start/Stop button and begin pedaling. Each work-  
out program is divided into ten periods. One resis-  
tance setting is programmed for each period. (The  
same resistance setting may be programmed for  
two or more consecutive periods.) Note: The  
amount of time in each period depends on the  
time goal that you set for the program. For exam-  
ple, if you set a 20-minute time goal, each period  
will last for two minutes.  
manual mode  
will be selected.  
To select a work-  
out program,  
first make sure  
that the word Stop is shown in the display. If it is  
not shown, press the Program Start/Stop button  
so the word Stop appears. Then, press the Up or  
Down button repeatedly until the word Program  
and the desired resistance profile appear in the  
display.  
At the end of each period, the resistance of the  
pedals will automatically change if a different  
resistance setting is programmed for the next  
period. Note: If the resistance level is too high or  
too low, you can change the resistance level by  
pressing the Up or Down button. However, when  
the current period ends, the resistance level will  
automatically change if a different resistance set-  
ting is programmed for the next period.  
The resistance profiles across the bottom of the  
display show how the resistance level will change  
during the workout programs. For example, the  
third profile shows that when the third program is  
selected, the resistance will gradually increase  
during the first half of the program and then  
decrease during the last half.  
Note: During the program, the console will display  
the time remaining in the program if you have set  
a time goal. If you have not set a time goal, the  
time will count up in the same way that it does  
when the manual mode is selected.  
After you have selected a workout program, press  
the Mode/Enter button.  
Set your workout goals.  
3
Once you have  
Follow your progress with the display.  
selected a work-  
5
6
7
out program, you  
See step 4 on page 9.  
will be prompted  
to set workout  
Measure your heart rate if desired.  
goals. Press the  
Up and Down  
See step 5 on page 9.  
buttons to select  
the number of minutes that you plan to exercise,  
the number of miles that you plan to pedal, the  
approximate number of calories you want to burn,  
and/or a target heart rate (see EXERCISE INTEN-  
SITY on page 13). After each selection, press the  
Mode/Enter button.  
When you are finished exercising, the console  
will automatically turn off.  
See step 6 on page 9.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Hold the handgrip pulse sensor.  
HOW TO USE THE HEART RATE PROGRAM  
Turn on the console.  
4
5
It is not necessary to hold the handgrip pulse sen-  
sor continuously during a heart rate program;  
however, you must hold the handgrip pulse sen-  
sor frequently for the program to function properly.  
Each time you hold the handgrip pulse sensor,  
keep your hands on the metal contacts for at  
least 30 seconds.  
1
See step 1 on page 8.  
Select the heart rate program.  
2
Each time the  
Start the program.  
console is  
turned on, the  
To start the program, press the Program  
manual mode  
Start/Stop button and begin pedaling. When you  
hold the handgrip pulse sensor, the console will  
compare your heart rate to the current target  
heart rate. If your heart rate is too far above or  
below the target heart rate, the resistance of the  
pedals will automatically change to keep your  
heart rate near the target heart rate.  
will be selected.  
To select the  
heart rate pro-  
gram, first make  
sure that the word Stop is shown in the display. If  
it is not shown, press the Program Start/Stop but-  
ton so the word Stop appears. Then, press the Up  
or Down button repeatedly until the heart symbol  
begins to flash in the lower right part of the dis-  
play. Then, press the Mode/Enter button.  
Follow your progress with the display.  
6
7
See step 4 on page 9.  
Set a target heart rate.  
When you are finished exercising, the console  
will automatically turn off.  
3
The display will show a “P,” for Pulse. Press the  
Up and Down buttons to select a target heart rate  
goal (see EXERCISE INTENSITY on page 13).  
Then, press the Mode/Enter button to confirm  
your goal.  
See step 6 on page 9.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MAINTENANCE AND TROUBLESHOOTING  
Inspect and properly tighten all parts of the exercise  
cycle regularly. Replace any worn parts immediately.  
HOW TO ELIMINATE FLEXING IN THE CENTER OF  
THE EXERCISE CYCLE  
To clean the exercise cycle, use a damp cloth and a  
small amount of liquid dishwashing soap. Important:  
To avoid damage to the console, keep liquids  
away from the console and keep the console out  
of direct sunlight.  
If the exercise cycle flexes in the center during use,  
turn the frame foot until the flexing motion is eliminated.  
HANDGRIP PULSE SENSOR TROUBLESHOOTING  
If the handgrip pulse sensor does not function properly,  
see step 5 on page 9.  
BATTERY REPLACEMENT  
If the console display becomes dim, the batteries  
should be replaced; most console problems are the  
result of low batteries. To replace the batteries, see  
assembly step 6 on page 6.  
Frame  
Foot  
HOW TO LEVEL THE EXERCISE CYCLE  
If the exercise  
cycle rocks on  
your floor during  
use, turn one or  
both of the level-  
ing caps on the  
rear stabilizer until  
the rocking motion  
is eliminated.  
Leveling Caps  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONDITIONING GUIDELINES  
The following guidelines will help you to plan your  
exercise program. Remember that proper nutrition  
and adequate rest are essential for successful results.  
During the first few minutes of exercise, your body  
uses easily accessible carbohydrate calories for ener-  
gy. Only after the first few minutes of exercise does  
your body begin to use stored fat calories for energy.  
If your goal is to burn fat, adjust the intensity of your  
exercise until your heart rate is near the lowest num-  
ber in your training zone as you exercise.  
WARNING:  
Before beginning  
this or any exercise program, consult your  
physician. This is especially important for  
persons over the age of 35 or persons with  
pre-existing health problems.  
For maximum fat burning, adjust the intensity of your  
exercise until your heart rate is near the middle of  
your training zone as you exercise.  
The pulse sensor is not a medical device.  
Various factors may affect the accuracy of  
heart rate readings. The pulse sensor is  
intended only as an exercise aid in determin-  
ing heart rate trends in general.  
Aerobic Exercise  
If your goal is to strengthen your cardiovascular sys-  
tem, your exercise must be “aerobic.” Aerobic exer-  
cise is activity that requires large amounts of oxygen  
for prolonged periods of time. This increases the  
demand on the heart to pump blood to the muscles,  
and on the lungs to oxygenate the blood. For aerobic  
exercise, adjust the intensity of your exercise until  
your heart rate is near the highest number in your  
training zone.  
EXERCISE INTENSITY  
Whether your goal is to burn fat or to strengthen your  
cardiovascular system, the key to achieving the  
desired results is to exercise with the proper intensity.  
The proper intensity level can be found by using your  
heart rate as a guide. The chart below shows recom-  
mended heart rates for fat burning, maximum fat  
burning, and cardiovascular (aerobic) exercise.  
WORKOUT GUIDELINES  
Each workout should include the following three parts:  
A warm-up, consisting of 5 to 10 minutes of stretching  
and light exercise. A proper warm-up increases your  
body temperature, heart rate, and circulation in prepa-  
ration for exercise.  
Training zone exercise, consisting of 20 to 30 min-  
utes of exercising with your heart rate in your training  
zone. Note: During the first few weeks of your exer-  
cise program, do not keep your heart rate in your  
training zone for longer than 20 minutes.  
To find the proper heart rate for you, first find your age  
at the bottom of the chart (ages are rounded off to the  
nearest ten years). Next, find the three numbers above  
your age. The three numbers are your “training zone.”  
The lowest number is the recommended heart rate for  
fat burning, the middle number is the recommended  
heart rate for maximum fat burning, and the highest  
number is the recommended heart rate for aerobic  
exercise.  
A cool-down, with 5 to 10 minutes of stretching. This  
will increase the flexibility of your muscles and will  
help to prevent post-exercise problems.  
EXERCISE FREQUENCY  
To maintain or improve your condition, plan three work-  
outs each week, with at least one day of rest between  
workouts. After a few months of regular exercise, you  
may complete up to five workouts each week, if  
Fat Burning  
desired. Remember, the key to success is make exer-  
cise a regular and enjoyable part of your everyday life.  
To burn fat effectively, you must exercise at a relative-  
ly low intensity level for a sustained period of time.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PART LIST—Model No. HREX1395.0  
R1205A  
Key  
Key  
Key  
No. Qty. Description  
No. Qty. Description  
No. Qty. Description  
1
2
3
4
5
6
7
8
9
1
1
1
1
1
1
1
1
2
Frame  
36  
37  
38  
39  
40  
41  
42  
43  
44  
45  
46  
47  
48  
49  
50  
51  
52  
53  
54  
55  
56  
57  
1
1
1
1
2
1
1
4
2
6
1
1
1
1
2
1
4
2
1
1
2
1
Clutch Bearing  
Flywheel Axle  
74  
75  
4
1
1
1
2
4
4
2
1
1
2
1
6
4
1
1
1
1
1
1
1
1
2
2
1
1
1
4
1
4
4
1
Grommet  
Seat Back Support  
Seat Bracket  
Seat Frame  
Upright  
Upper Pulse Wire  
Console  
Flywheel Pulley  
Flywheel  
76  
77  
Upper Wire Harness  
Handlebar Endcap  
M5 x 15mm Bolt  
M4 x 20mm Screw  
Crank Ring  
M8 x 80mm Hex Bolt  
Resistance Cable  
Resistance Motor  
M6 x 15mm Bolt  
M6 x 45mm Bolt  
M6 x 15mm Washer  
Seat  
78  
Console Bracket  
Handlebar  
79  
80  
Rear Stabilizer  
M8 x 70mm Carriage  
Bolt  
81  
82  
Left Side Shield  
Right Side Shield  
Side Shield Disc  
Upright Ring  
83  
10 15 M8 x 20mm Washer  
84  
11  
12  
13  
14  
15  
16  
17  
18  
2
2
2
2
1
1
4
1
M8 Acorn Nut  
Seat Back  
85  
Leveling Cap  
Seat Bracket Endcap  
M10 x 35mm Bolt  
M10 Nylon Locknut  
M8 x 20mm Bolt  
M5 x 12mm Screw  
M8 Washer  
86  
M5 x 8mm Screw  
M8 x 16mm Bolt  
Center Pulse Wire  
Large Pulley  
Transport Cap  
M3 x 12mm Screw  
“C” Magnet  
87  
88  
89  
M8 x 15mm Washer  
M8 Nylon Locknut  
M5 x 30mm Hex Head  
Bolt  
90  
Magnet  
91  
Crank  
Reed Switch/Wire  
M12 x 16mm Washer  
M3 x 10mm Bolt  
M10 x 16mm x 6mm  
Spacer  
92  
Lower Pulse Wire  
Large Snap Ring  
Left Crank Arm  
Right Crank Arm  
M10 Flanged Locknut  
Crank Cap  
93  
19  
20  
21  
22  
23  
24  
25  
1
1
1
1
1
3
2
M5 x 15mm Washer  
Resistance Spring  
“C” Magnet Bracket  
Right Pedal/Strap  
M5 Nut  
94  
95  
96  
58  
59  
60  
61  
62  
63  
64  
65  
66  
67  
68  
69  
70  
71  
72  
73  
1
1
1
1
3
2
1
1
1
2
2
2
2
1
2
1
Tension Spring  
Idler Bushing  
97  
98  
Left Pedal/Strap  
Adjustment Knob  
Frame Foot  
M10 x 14mm Washer  
M10 x 16mm x 2.5mm  
Spacer  
Idler  
99  
Spring Washer  
M8 x 16mm Screw  
M8 x 40mm Screw  
Transformer Wire  
M10 x 85mm Screw  
Lower Wire Harness  
Nylon Washer  
100  
101  
102  
103  
104  
105  
Seat Frame Spacer  
Frame Bushing  
M4 x 14mm Bolt  
M3 x 15mm Screw  
M5 x 30mm Round  
Head Bolt  
26  
1
M10 x 16mm x 10mm  
Spacer  
27  
28  
29  
30  
31  
32  
33  
34  
35  
2
2
1
2
2
2
1
2
3
3/8” x 15mm Screw  
3/8” Nylon Locknut  
Snap Ring  
M6 Nylon Locknut  
M6 Eyebolt  
M10 x 19mm Washer  
M10 Nut  
106  
107  
#
4
7
2
1
M4 x 12mm Screw  
M8 Curved Washer  
Hex Key  
“U” Bracket  
Pulse Sensor Assembly  
Pulse Wire  
Belt  
#
User’s Manual  
6000ZZ Bearing  
6003ZZ Bearing  
Foam Grip  
Upright Endcap  
Note: “#” indicates a non-illustrated part. Specifications are subject to change without notice. See the back cover  
of this manual for information about ordering replacement parts.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
75  
77  
73  
67  
69  
31  
83  
65  
76  
68  
85  
22  
97  
96  
30  
5
28  
32  
67  
68  
50  
81  
6
69  
95  
27  
24  
79  
84  
34  
89  
39  
38  
106  
13  
86  
14  
35  
58  
49  
66  
36  
86  
91  
107  
62  
33  
60  
51  
53  
79  
25  
90  
55  
59  
107  
62  
57  
50  
107  
61  
46  
45  
53  
62  
24  
24  
37  
47  
17  
56  
34  
14  
35  
48  
45  
44  
40  
25  
30  
56  
99  
29  
31  
54  
1
26  
45  
43  
27  
35  
93  
52  
42  
32  
13  
28  
52  
43  
86  
88  
40  
10  
44  
10  
87  
101  
103  
18  
23  
10  
45  
43  
101  
64  
102  
3
45  
82  
17  
41  
15  
101  
2
21  
105  
19  
4
10  
92  
100  
74  
87  
86  
101  
74  
103  
63  
17  
11  
16  
107  
107  
80  
70  
78  
20  
70  
74  
11  
107  
12  
84  
107  
12  
71  
96  
104  
72  
8
74  
70  
78  
97  
7
81  
94  
79  
80  
70  
104  
9
79  
98  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ORDERING REPLACEMENT PARTS  
To order replacement parts, please see the front cover of this manual. To help us assist you, please be prepared  
to provide the following information:  
• the MODEL NUMBER of the product (HREX1395.0)  
• the NAME of the product (HEALTHRIDER N25 exercise cycle)  
• the SERIAL NUMBER of the product (see the front cover of this manual)  
• the KEY NUMBER and DESCRIPTION of the part(s) (see pages 14 and 15)  
LIMITED WARRANTY  
ICON Health & Fitness, Inc. (ICON), warrants this product to be free from defects in workmanship and  
material, under normal use and service conditions, for a period of ninety (90) days from the date of pur-  
chase. This warranty extends only to the original purchaser. ICON's obligation under this warranty is lim-  
ited to replacing or repairing, at ICON's option, the product through one of its authorized service centers.  
All repairs for which warranty claims are made must be pre-authorized by ICON. If the product is shipped  
to a service center, freight charges to and from the service center will be the customer’s responsibility. For  
in-home service, the customer will be responsible for a minimal trip charge. This warranty does not extend  
to any product or damage to a product caused by or attributable to freight damage, abuse, misuse,  
improper or abnormal usage or repairs not provided by an ICON authorized service center; products used  
for commercial or rental purposes; or products used as store display models. No other warranty beyond  
that specifically set forth above is authorized by ICON.  
ICON is not responsible or liable for indirect, special or consequential damages arising out of or in con-  
nection with the use or performance of the product or damages with respect to any economic loss, loss  
of property, loss of revenues or profits, loss of enjoyment or use, costs of removal or installation or other  
consequential damages of whatsoever nature. Some states do not allow the exclusion or limitation of inci-  
dental or consequential damages. Accordingly, the above limitation may not apply to you.  
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of  
merchantability or fitness for a particular purpose is limited in its scope and duration to the terms set forth  
herein. Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the above  
limitation may not apply to you.  
This warranty gives you specific legal rights. You may also have other rights which vary from state to state.  
ICON HEALTH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321-9813  
Part No. 235784 R1205A  
Printed in USA © 2005 ICON IP, Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Graco Car Seat Car Seat Booster User Manual
Graco Stroller PD223368A 9 12 2 User Manual
Grizzly Biscuit Joiner G0609 User Manual
Grizzly Grinder H3117 User Manual
Grizzly Saw G8599 User Manual
Grizzly Saw H7396 User Manual
Honeywell Thermostat V8043 User Manual
Hotpoint Oven SD97PEH User Manual
Hotpoint Refrigerator RLA52 User Manual
Impex Home Gym TR 2 User Manual