POWER TRIM
Code 407C
OWNER’S HANDBOOK
FROM SERIAL NO:407C001001
ISSUE: 01-03-05
Download from Www.Somanuals.com. All Manuals Search And Download.
PART NO: 407005 (rev.0.)
TABLE OF CONTENTS
OWNER’S INFORMATION
4
4
7
SAFETY PRECAUTIONS
INTERNATIONAL PICTORIALS
ASSEMBLY
8
OPERATION
MAINTENANCE
TROUBLE SHOOTING CHART
REPAIR PARTS
11
14
20
22
Declared vibration emission values in accordance with Directive 98/37/EC.
2
Vibration Emission according to EN 836/A2:2001: 10 m/s .
Values determined at the handle when the machine was operated stationary on a
concrete surface at 3600 min-1.
Declared airborne sound power level of 106 dB(A) is in accordance with Directive
2000/14/EC.
Sound Pressure Level at operator position 90 dB.
Values determined at ear according to the specifications of EN 836/A2:2001.
2
F-050202L
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY
Hayter Limited warrants to the original user / purchaser that this unit shall be free from defects in
material and workmanship under normal use and service for a period of three years from the
date of purchase. The manufacturers of the engine and battery pack system (where applicable)
furnish their own warranty and services are provided through their authorised network (Refer to
“Engine/Battery Pack Warranty Statement”). To qualify for the full benefit of the warranty, the war-
ranty registration card must be returned within 60 days of purchase. Subject to the conditions and
exclusions noted in this limited warranty, we shall at our option, repair or replace any warranted
part during the applicable period. If you are in doubt or experience any difficulty, please consult a
Hayter Authorised Service Dealer for clarification..
To qualify for the extended warranty (second and third year) of the three year limited warranty, the
machine must have annual services carried out by an Authorised Hayter Service Dealer. These
chargeable services should be carried out within 12 and 24 months of the date of purchase.
Excluded from the extended warranty period are those items which are subject to normal wear
and tear e.g. tyres, wheels, cutterbars, cables, batteries and other consumable wearing parts.
All consumer machines which are fitted with a genuine Hayter friction disc as original equipment,
before use, are covered by a Lifetime Warranty against the engine crankshaft bending. Note:
friction washers, blade brake units and other such devices are not applicable. Only machines
fitted with a genuine Hayter friction disc, which are used in accordance with the recommended
operating and maintenance procedures, are covered.
This warranty does not apply to any unit that has been tampered with, altered, misused, abused
or used for hire, and will become invalid if non genuine Hayter parts are fitted. This warranty does
not cover minor mechanical adjustments unless they are due to defective materials or workman-
ship. Consult the Owner’s Handbook or a Hayter Authorised Service Dealer for assistance when
making these adjustments.
A warranty period of 90 days applies to machines used for commercial purposes.
To make a warranty claim, return the unit to a Hayter authorised dealer along with proof of pur-
chase stating the machine serial number and date of purchase. The service receipt(s) or this
Owner’s Handbook with the 1st/2nd year service boxes fully completed, must be produced as
proof of entitlement to the extended warranty period. Subject to the conditions and exclusions in
this limited warranty, the authorised dealer will, at our option, repair or replace any warranted part
within the duration of the warranty period.
This limited warranty gives you specific legal rights and is in addition to any statutory rights to
which you may be entitled and your statutory rights are not affected by this warranty. If you need
additional information concerning this written warranty, or assistance in obtaining services,
please write to:
HAYTER LIMITED,
Service Department,
Spellbrook,
Bishop’s Stortford,
Hertfordshire. CM23 4BU
1st Year
Service
Record
2nd Year
Service
Record
Date . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . .
Date . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . .
Signed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Signed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
F-050202L
3
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY RULES
5. Inspect the area where the machine is to
OWNER’S INFORMATION
be used. Your equipment can propel
small objects at high speed causing per-
sonal injury or property damage. Stay
away from breakable objects, such as
windows, greenhouses, etc.
Know your product: If you understand the
unit and how the unit operates, you will get
the best performance. As you read this manu-
al, compare the illustrations to the unit. Learn
the location and the function of the controls.
To help prevent an accident, follow the oper-
ating instructions and the safety rules. Keep
this manual for future reference.
6. Keep the area of operation clear of all
persons, particularly small children, and
pets.
7. Wear appropriate clothing such as a
long-sleeved shirt or jacket. Also wear
long trousers. Do not wear shorts.
8. Do not wear loose clothing which could
get caught in this equipment.
WARNING: Look for this symbol to indi-
cate important safety precautions. This
symbol indicates: “Attention! Become
Alert! Your Safety Is At Risk.”
9. Always wear safety goggles or safety
glasses with side shields when operating
the machine to protect your eyes from
foreign objects which can be thrown
from the unit.
10. Always wear work gloves and sturdy
footwear. Leather work shoes or short
boots work well for most people. These
will protect the operator’s ankles and
shins from small sticks, splinters, and
other debris, and improve traction.
Responsibility Of The Owner
WARNING: This cutting machine
is capable of throwing objects.
Failure to observe the following
11. It is advisable to wear protective head-
gear to prevent the possibility of being
struck by small flying particles, or being
struck by low hanging branches, twigs,
or other objects which may be unnoticed
by the operator.
safety instructions could result in serious
injury to the operator or bystanders.
The responsibility of the owner is
to follow the instructions below.
12. Do not operate the machine without
proper guards or other safety protective
devices in place.
SAFETY PRECAUTIONS
I. General Operation
13. Use this equipment for its intended pur-
pose only.
14. See manufacturer’s instructions for prop-
er operation and installation of accesso-
ries. Only use accessories approved by
the manufacturer.
1. Read, understand, and follow all instruc-
tions on the machine and in the manu-
al(s). Be thoroughly familiar with the
controls and the proper use of the ma-
chine before starting.
15. Operate only in daylight or good artificial
light.
2. Familiarise yourself with all of the safety
and operating decals on this equipment
and on any of its attachments or acces-
sories.
16. Do not operate the machine while under
the influence of alcohol, drugs or other
medication which can cause drowsiness
or affect your ability to operate this ma-
chine safely.
3. Do not put hands or feet near or under
rotating parts.
4. Only allow responsible individuals, who
are familiar with the instructions, to oper-
ate the machine.
17. Never operate machine in wet grass. Al-
ways be sure of your footing; keep a firm
hold on the handle and walk; never run.
4
F-050202L
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY RULES
18. Before each use, inspect the throttle
Do trim across the face of slopes; never up
and down. Do not trim excessively steep
slopes (maximum 15 degrees) or areas
where the ground is very rough. Exercise ex-
treme caution when changing direction on
slopes.
control lever and cable. Make sure that
the cable is free and that the lever is not
damaged. Also check the cable linkage
running to the carburetor for kinks, loose
fittings, and obstructions. Verify that the
control bail is working properly.
Do remove objects such as rocks, tree limbs,
19. Stop the rotating trimmer head when
crossing gravel drives, walks, or roads.
Wait for the cutting lines to stop rotating.
etc.
Do watch for holes, ruts, or bumps. Tall grass
can hide obstacles.
20. Watch for traffic when operating near, or
when crossing roads.
Do not trim near drop-offs, ditches, or em-
bankments. The operator could lose footing
or balance.
21. Stop the engine whenever you leave the
equipment, before cleaning repairing or
inspecting the unit, be sure the trimmer
head and all moving parts have stopped.
Let the engine cool, disconnect the
spark plug wire and move it away from
the spark plug.
Do not trim on wet grass. Reduced footing
could cause slipping.
III. Children
Tragic accidents can occur if the operator is
not alert to the presence of children. Children
are often attracted to the machine and the
trimming activity. Never assume that children
will remain where you last saw them.
1. Keep children out of the trimming area
and under the watchful care of a respon-
sible adult.
22. If the equipment should start to vibrate
abnormally, stop the engine, disconnect
the spark plug wire and prevent it from
touching the spark plug. Check immedi-
ately for the cause. Vibration is generally
a warning of trouble.
23. After striking a foreign object, stop the
engine. Remove the wire from the spark
plug. Inspect the machine for damage. If
damaged, repair before starting and op-
erating the machine.
2. Be alert and turn machine off if children
enter the area.
3. Before and while moving backwards,
look behind and down for small children.
4. Never allow children to operate the ma-
chine.
5. Use extra care when approaching blind
corners, shrubs, trees, or other objects
that may obscure vision.
24. Never leave the machine unattended
when the engine is running. Remove
the wire from the spark plug.
25. Regularly inspect the machine. Make
sure parts are not bent, damaged or
loose.
IV. Service
1. Use extra care in handling petrol and
other fuels. They are flammable and va-
pors are explosive.
26. Never pick up or carry the machine while
the engine is running.
a. Use only an approved container.
b. Never remove gas cap or add fuel
with the engine running. Allow en-
gine to cool before refueling. Do not
smoke.
c. Never refuel the machine indoors.
d. Never store the machine or fuel
container inside where there is an
open flame, such as a water heater.
e. If the fuel tank has to be drained,
this should be done outdoors. The
drained fuel should be stored in a
container specifically designed for
fuel storage or it should be dis-
posed of carefully.
27. Prolonged exposure to noise and vibra-
tion from petrol engine powered equip-
ment should be avoided. Take
intermittant breaks and/or wear ear
protection from engine noise as well as
heavy work gloves to reduce vibration in
the hands.
II. Slope Operation
Slopes are a major factor related to slip and
fall accidents which can result in severe inju-
ry. All slopes require extra caution. If you feel
uneasy on a slope, do not trim it.
F-050202L
5
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY RULES
2. Never run an engine indoors or inside a
8. To reduce fire hazard, keep machine
free of grass, leaves, or other debris
build-up. Clean up oil or fuel spillage.
Allow machine to cool before storing.
closed area.
3. Never make adjustments or repairs with
the engine running. Disconnect the
spark plug wire, and keep the wire away
from the plug to prevent accidental start-
ing. Always wear eye protection when
you make adjustments or repairs.
9. Stop and inspect the equipment if you
strike an object. Repair, if necessary, be-
fore restarting.
4. Check the trimmer head and engine
mounting bolts at frequent intervals for
proper tightness.
5. Keep all nuts and bolts tight and keep
equipment in good condition. Check
mounting hardware on trimmer head ev-
ery time you change trimmer line and
prior to each use.
10. Always disconnect spark plug wire be-
fore cleaning, repairing, or adjusting.
11. Do not change the engine governor set-
ting or over-speed the engine.
12. Clean and replace safety and instruction
decals as necessary.
13. To guard against engine over-heating,
always have engine debris filter
mounted and clean.
6. Never tamper with safety devices.
Check their proper operation regularly.
7. When servicing or repairing the ma-
chine, do not tip the machine over or up
unless specifically instructed to do so in
this Manual. Service and repair proce-
dures can be done with the machine in
an upright position. Some procedures
will be easier if the machine is lifted on a
raised platform or working surface.
14. Inspect machine before storage.
15. Use only original equipment or autho-
rised replacement parts.
16. Never replace the cutting lines with met-
al parts.
6
F-050202L
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY RULES
INTERNATIONAL PICTORIALS
IMPORTANT: The following pictorials are located on your unit or on literature supplied
with the product. Before you operate the unit, learn and understand the purpose for
each pictorial.
1
2
3
7
4
9
5
6
8
Safety Warning Pictorials
1
WARNING
5
WARNING: Rotating Parts. Stop Engine.
Disconnect Spark Plug Wire Before
Making Adjustments.
WARNING: Wear Eye Protection
DANGER: Disconnect Spark Plug Wire
Before Servicing Unit.
2
IMPORTANT: Read Owner’s Manual
Before Operating This Machine.
6
7
3
4
WARNING: Thrown Objects. Keep
Bystanders Away. Read User
Instructions Before Operating This
Machine.
8
9
Direction of Rotating Line.
Declared airborne sound power level of
106dB(A) is in accordance with Directive
2000/14/EC.
Do Not Trim Up And Down Slopes. Trim
Across Slopes.
2
6
3
7
1
4
5
8
Control And Operating Pictorials
1
2
3
4
Slow
5
6
7
8
Oil
Fast
Fuel
Engine Stop
Engine Stop
Engage
Disengage
7
F-050202L
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY
ASSEMBLY
CONTENTS OF PARTS BAG
1 - Owner’s Manual
1 - Parts Bag
(Not shown actual size)
2 Sets - Trimmer Lines
(0.155 inch diameter)
1 - Safety Glasses
1 - Bag (4 Screws)
TO REMOVE THE
WARNING: Always wear safety
glasses or eye shields while as-
sembling the machine.
TRIMMER FROM CARTON
1. Remove the parts bag and any loose parts
from carton.
2. Remove the packing material positioned
around the unit.
TOOLS REQUIRED
1 - Knife to cut carton.
1 - T-Handle Wrench.
3. Cut down all four corners of the carton and
lay the side panels flat.
4. Pull the trimmer out of the carton and off
the base pad.
5. Remove packing material from around the
trimmer head.
Figure 1 shows the machine completely as-
sembled and positioned in the carton for ship-
ment.
References to the right or left hand side of the
machine are from the viewpoint of the opera-
tor’s position behind the unit.
6. Remove protective plastic from front of
frame.
Figure 1
8
F-050202L
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY
HOW TO RAISE THE HANDLE
1. Hold the handle with one hand and loosen both handle adjustment knobs until the ratchet
teeth are disengaged. Do not remove the handle adjustment knobs. See Figure 2.
2. Raise the handle to the
operating position.
3. Stand in the operator’s
Handlebar
position behind the ma-
chine. Put the handle in
a comfortable position.
Rope
Make sure both sides of
Guide
the handle are level.
NOTE: Make sure the
cables are not caught
between the upper and
Recoil Start
Handle
lower handle.
Handlebar
4. Tighten the handle ad-
Pivot
justment knobs. Make
sure the handle pivots
are locked in place.
Handlebar
Adjustment Knob
NOTE: The handlebar
height is adjustable.
See “How To Adjust
The Height Of The Han-
dlebar” in the Mainte-
nance section.
Figure 2
5. To attach the recoil start handle to the rope guide, twist the rope through
the rope guide mounted on the right side of the handlebar.
HOW TO ATTACH THE GUARD
1. Attach the guard to the machine with the
four fasteners as shown. See Figure 3.
Trimmer
Fastener
Guard
Figure 3
9
F-050202L
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY
Fill Crankcase With Oil
ENGINE PREPARATION
1. Remove the oil fill cap/dipstick shown in
Figure 4. Fill the crankcase to the FULL
line on oil fill cap/dipstick. DO NOT OVER-
FILL.
2. Install the oil fill cap/dipstick and tighten
securely.
Note: Engine does not contain OIL or
PETROL.
WARNING: Follow the engine
manufacturer’s instructions for
the type of petrol and oil to use.
Always use a safety petrol container. Do
not smoke when adding petrol to the en-
gine. When inside an enclosure, do not
fill with petrol. Before you add petrol,
stop the engine. Let the engine cool for
several minutes.
Fill Fuel Tank With Petrol
See the engine manufacturer’s instructions for
the type of petrol to use.
Fuel Cap
Oil Fill
Cap/Dipstick
See the engine manufacturer’s instructions
for the type of petrol and oil to use. Before
you use the unit, read the information on
safety, operation, maintenance, and storage.
Note: Actual sustained horsepower will
likely be lower due to operating limita-
tions and environmental factors.
Figure 4
As you learn how to use the machine, pay ex-
tra attention to the following important items:
n CHECKLIST
For the best performance and satisfaction
from this quality product, please review the fol-
lowing checklist before you operate the ma-
chine:
nn Engine oil is at correct level.
nn Fuel tank is filled with fresh, clean, reg-
ular unleaded petrol.
n
All assembly instructions have been
completed.
Check carton. Make sure no loose parts
remain in the carton.
nn Become familiar and understand the
function of all controls. Before your start
the engine, operate all controls.
n
10
Download from Www.Somanuals.com. All Manuals Search And Download.
F-050202L
OPERATION
KNOW YOUR POWERTRIM
READ THE OWNER’S HANDBOOK AND ALL SAFETY RULES BEFORE YOU OPERATE the
machine. To familiarise yourself with the location of the controls, compare the illustrations with your
machine. Save this handbook for future reference.
Control Bail
Trimmer Head Drive Lever
Upper Handlebar
Throttle Control Lever
Fuel Cap
Recoil Starter Handle
Dipstick
Debris Screen
Handlebar Adjustment Knob
Trimmer Head
Trimmer Line
Figure 5
Trimmer Head Drive Lever - Engages
the rotation of the trimmer head.
Throttle Control Lever - Controls the
speed or stops the engine.
Control Bail - Release to stop the rotation
of the trimmer head.
Recoil Starter Handle - The engine is
equipped with an easy pull recoil starter.
EYE PROTECTION
HOW TO STOP
THE TRIMMER HEAD
1. Release the control bail. It will return to its
open position and disengage the trimmer
head.
WARNING: Debris thrown from
the machine can result in
foreign objects being thrown
into the eyes, which can cause severe
eye damage. Always wear safety
glasses or eye shields when operating
the machine.
HOW TO STOP THE ENGINE
WARNING: The trimmer head will
continue to rotate for several sec
onds after the engine has
stopped
Always wear safety glasses. If you wear eye
glasses, put a Wide Vision Safety Mask over
your eye glasses.
1. Move the throttle control lever com-
pletely back to the STOP position.
11
F-050202L
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
HOW TO USE THE
TRIMMER HEAD DRIVE LEVER
Control Bail
Handlebar
1. To engage the trimmer head, hold the con-
trol bail against the handle. Move the
trimmer head drive lever forward to en-
gage the trimmer head. See Figure 6. The
faster the engine runs, the faster the trim-
mer head will rotate.
2. Once the trimmer head is rotating, push
the machine forward to trim.
Trimmer Head
Drive Lever
Figure 6
HOW TO USE THE
THROTTLE CONTROL
1. During normal use, set the throttle con-
trol lever in the FAST position to run the
engine at full speed.
2. Pull the throttle control lever back to de-
crease engine speed. Push the throttle
control lever forward to increase engine
speed.
Throttle Control
Lever
3. To stop the engine, pull the throttle con-
trol lever completely back to the STOP
position.
Figure 7
HOW TO USE
THE PRIMER BUTTON
1. Push the primer button. See Figure 8 for
location. For the number of times to push
the primer button, see the primer button
decal located on the engine or follow the
directions in the Engine Manual. Wait
approximately two seconds between each
push.
NOTE: Do not use the primer button to re-
start a warm engine after a short shutdown.
Primer Button
Figure 8
12
Download from Www.Somanuals.com. All Manuals Search And Download.
F-050202L
OPERATION
NOTE: If engine fails to start after three
pulls, push the primer button two times and
again pull the recoil starter handle.
HOW TO START THE ENGINE
NOTE: DO NOT BE ALARMED, your engine
will smoke the first time it is started. It is
burning off the protective coating that is on
the internal engine parts.
WARNING: Never run the engine
indoors or in a poorly ventilated
area. Engine exhaust contains
carbon monoxide, an odorless
and deadly gas. Keep hands,
feet, hair and loose clothing
away from the machine and any
moving parts on the engine.
Avoid the muffler and surround-
ing areas. Temperatures may ex-
ceed 1505F.
WARNING: Never leave the ma-
chine unattended while the en-
gine is running. Wait for the trim-
mer lines to stop rotation.
1. Before each use, remove debris from the
debris screen shown in Figure 5. Debris
can cause the engine to overheat. Wipe
the debris screen with a cloth or paper
towel.
2. Move the throttle control lever forward to
the START or FAST position.
3. To start a cold engine, push the primer but-
ton five times. Wait two seconds between
each push of the primer button.
NOTE: Do not use the primer to start a
warm engine.
4. Firmly hold the recoil starter handle with
your right hand. See Figure 9.
5. Pull back sharply on the recoil starter
handle. DO NOT allow the starter rope to
snap back. Let the starter rope slowly re-
wind as you hold the recoil starter handle.
Recoil Starter Handle
Figure 9
TRIMMER TIPS
WARNING: Debris such as sticks,
gravel or stones, can be thrown
with sufficient force to cause per-
sonal injury or property damage.
take longer to complete the job. If the trim-
mer lines are worn to less than half their
original length, change to a new trimmer
line. “See How To Change The Trimmer
Line” in the Maintenance section.
S
Set the throttle control in the FAST posi-
tion. If the weeds or grass are tall and
thick, operate the machine at a slower
walking speed.
S
Do not trim on excessively steep slopes. If
a slope is difficult to stand on, do not trim.
Do not trim on slopes when the ground is
slippery or wet. Trim across the face of a
slope, not up and down.
S
S
Frequently clean the underside of the ma-
chine to remove any grass build up.
S
STrimming may be done at slower engine
speeds especially when trimming around
flowers, shrubs, and small trees. Operat-
ing at slower speeds will also reduce en-
gine noise and vibration at the upper
handle.
For best results and longer lasting line,
use the ends of the line to do the cutting.
This is easily done by moving slowly
through very thick or heavy weeds.
S
If the trimmer lines become too short, it will
13
Download from Www.Somanuals.com. All Manuals Search And Download.
F-050202L
MAINTENANCE
CUSTOMER RESPONSIBILITIES
SERVICE RECORDS
Before Every
Every
25
Hours Hours
Every
100
Hours
As
Noted
SERVICE
DATES
Each
Use
5
Fill in dates as you
complete regular service.
Check Engine Oil Level
Check trimmer Lines
√
√
1
2
Check Trimmer Head
Engagement
√
Engine/Machine Cleaning
Check Nuts and Bolts
Check Spark Plug
√
√
√
√
√
√
√
Change Engine Oil
Service Air Filter
3
Lubricate Jackshaft Assembly
Lubricate Wheel Bearings
Note 1 - When old line is half the original length, replace with new line.
Note 2 - Clean daily if used in extremely dusty or dirty conditions.
Note 3 - Change more often if used in extremely dusty or dirty conditions.
PRODUCT SPECIFICATIONS
Trimmer Line Diameter 3.3mm (0.130”)
Trimmer Line Length
Height Of Cut (Fixed)
Dimensions
52omm (21.5”)
76mmm (3”)
1400 x 555 x 1000
Tescumseh LEV115
5
Engine
Horse Power
Displacement
Petrol Capacity
Oil Capacity
11.5 cu. in.
1.4 litre (1.5 quarts)
0.6 litre (20 oz.)
Champion RJ-19LM
0.030”
Spark Plug
Spark Plug Gap
Weight
29.5kg
14
F-050202L
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
LUBRICATION
Grease Fitting
How To Lubricate
The Jackshaft Assembly
A grease fitting is provided to lubricate the
jackshaft assembly. Use a grease gun with au-
tomotive type grease to lubricate the jackshaft
assembly as shown in Figure 10.
Figure 10
How To Change Engine Oil
Change the engine oil when the engine is
warm. For the proper oil capacity, see “Product
Specifications”.
7. Connect the spark plug wire to the spark
plug.
1. Disconnect spark plug wire from the spark
plug.
Oil Drain Plug
2. Remove the oil drain plug as shown in
Figure 11.
3. Drain all the engine oil into a flat pan.
4. Install the oil drain plug. Make sure the
oil drain plug is tight.
5. Remove the dipstick.
6. Fill the engine crankcase. DO NOT
OVERFILL. For proper oil capacity, see
“Product Specifications”.
Figure 11
5. Put the new air filter into the cover.
HOW TO REPLACE THE AIR FILTER
Replace the air filter once a year or more often
in dusty or dirty conditions. DO NOT attempt to
clean or oil the air filter. Remove and install a
new air filter as follows:
6. Push the cover firmly against the flange.
Turn the cover counterclockwise until
tight. Be sure the retainers are locked
around the flange.
CAUTION: Never run the engine without
the air filter installed. An air filter clogged
with dust can result in loss of engine power
and can cause excessive wear or damage
to the engine. If the air filter is clogged, re-
place immediately.
7. Connect the spark plug wire to the spark
plug.
Flange
1. Disconnect the spark plug wire from the
spark plug.
2. Turn the cover clockwise as shown in
Figure 12. Remove the cover and the air
filter.
Air Filter
3. Discard the old air filter.
Cover
Figure 12
4. Clean the cover and the flange.
F-050202L
15
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
SPARK PLUG
Check the spark plug every 25 hours. Re-
place the spark plug if the electrodes are
pitted or burned or if the porcelain is cracked.
Tighten the spark plug to a torque of 15
foot-pounds.
1. Make sure the spark plug is clean. Clean
the spark plug by carefully scraping the
electrodes (do not sand blast or use a wire
brush).
Feeler Gauge
0.030”
2. Check the spark plug gap with a feeler
gauge. See “Product Specifications” for
the correct spark plug gap and replace-
ment spark plug.
Spark Plug
Figure 13
3. Before installing the spark plug, coat the
threads lightly with oil for easy removal.
HOW TO ADJUST THE HEIGHT OF
THE HANDLEBAR
Handlebar
Use the knobs, on each side of the handle-
bar, to adjust the height of the handlebar.
Ratchet
Teeth
1. Hold the handlebar with one hand and
loosen both knobs until the ratchet teeth
are disengaged. Do not remove the
knobs. See Figure 14.
2. Move thehandlebar up or down to the de-
sired position, then align the ratchet
teeth. Make sure both sides of the hand-
lebar are level.
3. Tighten the knobs.
Knob
Figure 14
16
Download from Www.Somanuals.com. All Manuals Search And Download.
F-050202L
MAINTENANCE
SERVICE AND ADJUSTMENT
WARNING: Before you inspect, clean or service the machine, stop the engine.
Make sure that all moving parts have stopped. Disconnect the wire from the
spark plug.
HOW TO REPLACE THE TRIMMER LINE
For the best performance, use a heavy
gauge 3.3mm (0.130” diameter) trimmer
line. Cut the length of the trimmer line to
52cm (21.5 inches). Do not allow the length
of the lines to vary more than one inch. This
is important to make sure the trimmer head
is balanced and does not vibrate.
IMPORTANT: To extend the life of the trim-
mer line, keep the trimmer line moist. If not
kept moist, the nylon trimmer line will be-
come dry and brittle. Keep extra trimmer
line in a can of water. The line will then stay
flexible and easy to change. A flexible line
will also last much longer.
HOW TO CHANGE TRIMMER LINES
When the trimmer line becomes worn to half the original length, replace the trimmer line as
follows:
Line
Retainer
Trimmer
Line
Line
Retainer
5. Then, check to make
sure that the ends of the
line are even.
1. Stop the engine. Wait for 4. Next, take the ends of the
all moving parts to stop.
line, cross over the line
retainer, and thread the
ends through the centre
hole.
2. Remove worn trimmer
line from line retainer.
3. First, thread the ends of
the new trimmer line
through the outside
loops.
17
F-050202L
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
HOW TO
Trimmer Housing
REPLACE THE DRIVE BELT
To replace the drive belt, the trimmer head
and shield must be removed as follows.
WARNING: Before you remove
the drive belt, disconnect the
wire from the spark plug.
1. Remove the two fasteners that hold the
rear of the shield to the trimmer housing
(See Figure 15).
Drive Belt
2. Remove the four fasteners that hold the
front of the shield and trimmer head to
the trimmer housing.
Shield
3. Remove the “V” pulley from the idler
bracket.
4. Raise the front of the trimmer housing
and remove the drive belt. On some mod-
els, it is necessary to loosen the mount-
ing bolt for thedrive pulley to remove the
drive belt (see Figure 16). Do not bend the
belt guides.
Trimmer Head
Figure 15
NOTE: Make sure you replace the drive
belt only with a replacement belt from
the factory.
5. To assemble the drive belt, reverse the
above steps. Make sure all fasteners are
tight. Make sure the mounting bolt for the
drive pulley is tight.
“V” Pulley
Belt Guide
Drive Belt
6. Check the routing of the drive belt. Make
sure the drive belt is inside of all belt
guides shown in Figure 16.
Belt Guide
Belt Guide
IMPORTANT: Test the drive system. Start
the engine and move the throttle control to
the FAST position. Engage and disengage
the trimmer head several times. When dis-
engaged, make sure the trimmer head com-
pletely stops when resting on the ground. If
the trimmer head continues to rotate, take
the machine to the nearest authorised
Service Dealer.
Mounting Bolt
Drive Pulley
Figure 16
18
Download from Www.Somanuals.com. All Manuals Search And Download.
F-050202L
MAINTENANCE
STORAGE
WARNING: Do not remove petrol
while inside a building, near a
fire, or while you smoke. Petrol
fumes can cause an explosion or
a fire.
Engine
To prevent engine damage when the ma-
chine is in storage for 30 days or more, fol-
low the steps below:
S
S
Let the engine run until it is out of petrol.
When the machine is put in storage for thirty
days or more, follow the steps below to
make sure the machine is in good condition
the following season.
Drain the oil from the warm engine. Fill the
engine crankcase with new oil.
S
Remove the spark plug from the cylinder.
Pour one ounce of oil into the cylinder.
Slowly pull the recoil starter handle so that
the oil will protect the cylinder. Install a new
spark plug in the cylinder.
Trimmer
S
Completely clean the machine.
S
Put the machine in a building that has
good ventilation.
S
Clean dirt and debris from the cylinder
cooling fins and the engine housing.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
F-050202L
TROUBLE SHOOTING CHART
TROUBLE
CAUSE
CORRECTION
Engine does not start
Spark plug wire
disconnected.
Connect spark plug wire.
Engine not primed.
Prime engine.
Defective or incorrectly
gapped spark plug.
Inspect or replace spark
plug.
Fuel tank empty.
Add fuel.
Dirty carburetor or fuel line.
Dirty air filter.
Clean carburetor or fuel line.
Replace air filter.
Carburetor out of adjustment. For carburetor adjustment,
take the unit to an authorised
Service Dealer.
Engine flooded.
Wait several minutes before
starting.
Throttle control lever in
incorrect position.
Move throttle lever to FAST
or START position.
Stale petrol.
Drain old petrol and add
fresh petrol.
Defective throttle control
lever or wire.
Inspect lever and wire.
Replace if damaged or
defective.
Engine runs poorly.
Bad spark plug.
Dirty air filter.
Replace spark plug.
Replace air filter.
Carburetor out of adjustment. Adjust carburetor. Take the
unit to an authorised Service
Dealer.
Stale petrol.
Drain old petrol. Add fresh
petrol.
Engine cooling system
clogged.
Clean engine screen and
cooling fins.
20
F-050202L
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLE SHOOTING CHART
Engine overheats.
Engine cooling system
clogged.
Clean debris screen and
engine cooling fins.
Carburetor out of adjustment. Adjust carburetor. Take the
unit to an authorised Service
Dealer.
Oil level is low.
Add oil.
Engine will not stop
running.
Defective throttle control
lever or wire.
Inspect and replace
damaged parts.
Throttle not adjusted
properly.
Move throttle to the full OFF
position.
Poor trimming
performance.
Trimmer line length is too
short.
Correct line length is 52cm
(21.5 inches). When less
than 1/2 this length, replace
the line.
Engine not set at FAST
speed.
Move engine throttle lever to
FAST position.
Trimmer vibrates
Trimmer line lengths are
substantially different.
Adjust trimmer line to
approximately equal lengths.
Loose nuts or bolts.
Check all bolts and nuts,
including engine bolts.
Broken trimmer head.
Replace broken part.
Trimmer head does not
retain line
Trimmer line not properly
attached.
Follow instructions on decal
or in the Maintenance
section of the owner’s
handbook.
Broken line retainer.
Replace trimmer head
assembly.
Trimmer line not correct size. Use 3,3mm (0.130 inch)
diameter trimmer line.
21
F-050202L
Download from Www.Somanuals.com. All Manuals Search And Download.
Code 407C
REPAIR PARTS
31
1
34
2
33
3
4
28
6
5
2
7
9
8
4
6
10
10
16
17
11
9
4
32
19
14
20
11
12
15
27
14
19
16
22
29
32
30
23
24
25
26
20
6
17
22
Download from Www.Somanuals.com. All Manuals Search And Download.
F-050202L
Code 407C
REPAIR PARTS
Key
No.
Description
Part No.
1
Lever, Stop
MU740198E549
MU323035
MU740193
MU071372
MU740196E701
MU15x116
MU740194
MU672510
MU740202
MU783000
MU711936
MU711937
MU740158
MU740195
MU740185
MU015x84
MU0020x3
MU740190
MU740188
MU711935
MU740150E549
MU0025x6
MU740192
MU001x45
MU26x274
-----
2
Bolt
3
Cable, Control Latching
Tie, Cable
4
5
Handlebar
6
Nut
7
Control, Throttle
Guide, Rope
Knob, Handlebar
Washer
8
9
10
11
12
14
15
16
17
18
19
20
22
23
24
25
26
27
28
29
30
31
32
33
34
--
Washer, Spring
Bolt
Pivot, Handlebar
Handlebar, Lower
Wheel & Tire
Nut, Axle
Washer
Spacer
Assembly, Axle & Bracket
Bolt, Carriage
Deck
Bolt
Shield, Trailing
Bolt
Screw
Engine
Protection, Eye
Nut
MU711890
MU015x88
MU712409
MU0020x3
MU672292
MU1601001
MU713004
MU712416
MU713006
MUF-050202L
Decal, Engine Stop
Washer, Spring
Spacer, PM .26x.5x.2
Shroud, Engine (Optional)
Decal, Powertrim (not shown)
Decal, Hayter (not shown)
Decal, Warning (not shown)
--
--
--
Instruction Book & Parts List
23
F-050202L
Download from Www.Somanuals.com. All Manuals Search And Download.
Code 407C
REPAIR PARTS
1
2
3
4
5
7
8
6
24
15
25
26
16
17
18
9
10
1
19
11
20
27
14
12
13
29
30
31
33
31
22
23
24
Download from Www.Somanuals.com. All Manuals Search And Download.
F-050202L
Code 407C
REPAIR PARTS
Key
No.
Description
Part No.
1
Nut
MU015x84
MU025x11
MU740150E549
MU26x256
MU740231 Z
MU009x48
MU712403
MU740292
MU15x119
MU17x104
MU740171
MU740173
MU711933
MU740244
MU740179
MU740183
MU018x31
MU001x20
MU26x235
MU770070
MU740206
MU26x294
MU1001049
MU740300
MU740163
MU712126
MU740175E549
MU712127
MU740164
MU740299
2
Screw
3
Frame, Trimmer
Screw
4
5
Bracket, Idler Assembly
Bolt
6
7
Spring
8
Spacer
9
Nut
10
11
12
13
14
15
16
17
18
19
20
22
23
24
25
26
27
29
30
31
33
Washer
Pulley, Cutting Head
Spacer
Belt
Pulley, Idler
Pulley, Engine
Pulley, Idler
Lockwasher
Bolt
Screw
Guard Assembly
Guard
Screw
Jackshaft Housing Assembly
Shaft, Cutting
Wrap, Upper Head
Screw
Assembly, Cutting Disc
Screw, Set
Line, Cutting
Guide Assembly, Metal Height
25
F-050202L
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES
26
F-050202L
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES
27
F-050202L
Download from Www.Somanuals.com. All Manuals Search And Download.
How To Order Replacement Parts
Use only manufacturer’s authorised or approved replacement parts. The letter
placed on the end of the part number denotes the type of finish for the part, C for
chrome, Z for zinc, a PA for purchased assembly. It is important that you include
this when ordering a part. Do not use attachments or accessories not specifically
recommended for this unit. In order to obtain proper replacement parts you must
supply the model number of your machine (see serial number).
Replacement parts, except for the engine, transmission, transaxle or differential,
are available from your local Hayter authorised dealer, the store where the
mower was purchased or a service shop recommended by the store.
If you are unable to obtain parts or service in the manner outlined above, then
contact:
HAYTER LIMITED,
Service Department,
Spellbrook,
Bishop’s Stortford,
Hertfordshire. CM23 4BU
When ordering the following information is required:
(1) The Model Number
(2) Serial Number
(3) Part Number
(4) Quantity
28
F-050202L
Download from Www.Somanuals.com. All Manuals Search And Download.
|