111-1471 (C) 29/8/08 12:56 pm Page 1.1
Harrier 56
CODES
560F 561F
Auto Drive
Auto Drive
(Variable Speed) (Variable Speed)
(Electric Start)
OWNER'S HANDBOOK
(English Version)
CODE
560F
561F
FROM SERIAL NO:
PART NUMBER: 111-1471 (C)
280000001
280000001
ISSUE 29.08.08
Download from Www.Somanuals.com. All Manuals Search And Download.
111-1471 (C) 29/8/08 12:56 pm Page 1.3
1st Year (12 months)
1st Year (12 months)
Owner’s Name:
We certify that this service has been
carried out by an Authorised Hayter
Service Dealer
Serial Number:
Date:
Date:
Note for dealer: Please retain this voucher for your records.
2nd Year (24 months)
2nd Year (24 months)
Owner’s Name:
Serial Number:
We certify that this service has been
carried out by an Authorised Hayter
Service Dealer
Date:
Date:
Note for dealer: Please retain this voucher for your records.
Download from Www.Somanuals.com. All Manuals Search And Download.
111-1471 (C) 29/8/08 12:56 pm Page 1.4
Download from Www.Somanuals.com. All Manuals Search And Download.
111-1471 (C) 29/8/08 12:56 pm Page 1.5
CONTENTS
1.2 Main Features/Specifications
1.5 Contents
1.23 - 1.31 Mower Maintenance
1.23
1.23
- Engine
- Throttle Cable Adjustment
- Carburettor Adjustments
- Oil Service
1.6 Introduction
1.23
1.24
1.7 Warranty
1.24
1.25
1.25
1.25
1.26
1.26
- Air Cleaner Service
- Spark Plug Service
- Keeping Engine Clean
- Grassbag
1.8 - 1.11 Safety Precautions
1.8
1.8 - 1.9
1.9 - 1.10
1.10 - 1.11
1.11
- Training
- Preparation
- Operation
- Maintenance and Storage
- Safety Symbols
- Decal Symbols
- Deck Housing
- Securing Nuts and Bolts
- Clutch Cable Adjustment
- Lubrication
- Cutterblade Removal
- Cutterblade Assembly
- Cutterblade Sharpening
- Storage
1.26 - 1.27
1.27
1.28
1.11
1.28
1.29
1.30
1.31
1.12 Assembling the Mower
1.12
1.12
1.12
- Delivery Checklist
- Handlebar
- Grassbag Attachment
- Battery Charging
1.13 Before Starting the Mower
1.13
1.13
1.13
1.13
- Prevent Engine Damage
- Oil Type
- Check Oil Level
- Fuel Type
1.32 - 1.33 Trouble Shooting
1.34 Declaration of Conformity
1.36 - 1.41 Parts List
1.14 - 1.19 Operating The Mower
1.36
1.37
1.38 - 1.40
1.39 - 1.41
- Parts List - Upper
1.14
1.14 - 1.15
1.15
- Controls
- Starting
- Electric Start
- Forward Travel
- Reverse Travel
- Turning
- Stopping
- Slopes
- Height of Cut
- Before Mowing
- Grassbag
- Exploded View - Upper
- Parts List - Lower
- Exploded View - Lower
1.15
1.16
1.16
1.16
1.17
1.17
1.42 - 1.43 Notes
1.44 Customer Info/Notes
1.18
1.18
1.18
1.19
1.19
1.19
- Without Grass Collection
- Heavy Growth
- Friction Disc
- Non-Grassed Areas
- Lawn Care Calendar - Guide Only
- Lawn Stripes
1.20 - 1.21
1.21
1.22 Maintenance Schedule
1.5
Download from Www.Somanuals.com. All Manuals Search And Download.
111-1471 (C) 29/8/08 12:56 pm Page 1.6
INTRODUCTION
Thank you for purchasing a Hayter mower. The following pages are designed to help you gain
safe and efficient service from your machine.
IMPORTANT: This ‘Owners Handbook’ should be regarded as part of the mower as it gives
essential information regarding mower safety, operation, maintenance and specifications. Read
and understand this handbook prior to operating your mower for the first time. Make sure you
are familiar with all the controls and points of regular maintenance. If you have any doubts,
consult your local Hayter authorised dealer who will be pleased to give you assistance.
IMPORTANT: This mower is designed solely for use in a domestic grass cutting
environment. Use in any other way is considered as contrary to the intended use. Compliance
with and strict adherence to the conditions of operation, service and repair as specified in this
handbook also constitute essential elements of the intended use.
This mower should be operated, serviced and repaired only by persons who are familiar with
its particular characteristics and who are acquainted with the relevant safety procedures.
The safety precautions listed in this handbook and all other generally recognised regulations on
safety must be observed at all times.
Any arbitrary modifications carried out to this machine may relieve Hayter Limited of
liability for any resulting damage or injury.
Hayter mowers are robustly constructed and designed for efficient economical
performance under normal mowing conditions. Correct operation and maintenance will ensure
a long and satisfactory service life. Prior to despatch from our factory every effort is made to
ensure that your mower is delivered in perfect condition.
Throughout this handbook all references to left and right are as viewed from behind the
handlebar, in the direction of forward travel.
This handbook is based on information available at the time of publication.
HAYTER LIMITED reserve the right to amend product specifications without prior notification.
1.6
Download from Www.Somanuals.com. All Manuals Search And Download.
111-1471 (C) 29/8/08 12:56 pm Page 1.7
WARRANTY
LIMITED WARRANTY
Hayter Limited warrants to the original user/purchaser that this unit shall be free from defects
in material and workmanship under normal use and service for a period of three years from the
date of purchase. The manufacturer of major proprietry components ie. engines, gearbox /
transaxle (where applicable) furnish their own warranty and services are provided through their
authorised network. To qualify for the full benefit of the warranty, the warranty registration card
must be returned within 14 days of purchase. Subject to the conditions and exclusions noted in
this limited warranty, we shall at our option, repair or replace any warranted part during the
applicable period. If you are in doubt or experience any difficulty, please consult a Hayter
Authorised Service Dealer for clarification.
To qualify for the extended warranty (second and third year) of the three year limited warranty
the machine must have annual services carried out by an Authorised Hayter Service Dealer.
These chargeable services should be carried out within 12 and 24 months of the date of purchase.
Excluded from the extended warranty period are those items which are subject to normal wear
and tear e.g. tyres, wheels, cutterblades, belts, cables, grassbags, sweeper/brushes, batteries and
other consumable wearing parts.
The Harrier 56 models are covered by a one year limited warranty when used for commercial
applications.
All consumer machines which are fitted with a genuine Hayter friction disc as original
equipment before use, are covered by a Lifetime Warranty against the engine crankshaft
bending. Note: friction washers, blade brake clutch (B.B.C) units and other such devices are not
applicable. Only machines fitted with a genuine Hayter friction disc, which are used in
accordance with the recommended operating and maintenance procedures, are covered.
This warranty does not apply to any unit that has been tampered with, altered, misused, abused or
used for hire, and will become invalid if non genuine Hayter parts are fitted. This warranty does
not cover minor mechanical adjustments unless they are due to defective material or
workmanship. Consult the Owner's Handbook or a Hayter Authorised Service Dealer for
assistance when making these adjustments.
On the Harrier 56 models which are used in a commercial application, a 90 day warranty
period applies to those items which are subject to normal wear and tear e.g. tyres, wheels,
cutter bars, belts, grass bags and other consumable wearing parts.
To make a warranty claim, return the unit to a Hayter authorised dealer along with proof of
purchase stating the machine serial number and date of purchase. The service receipt(s) or this
Owners Handbook with the 1st/2nd year service boxes fully completed, must be produced as
proof of entitlement to the extended warranty period. Subject to the conditions and exclusions in
this limited warranty, the authorised dealer will, at our option, repair or replace any warranted
part within the duration of the warranty period.
This limited warranty gives you specific legal rights and is in addition to any statutory rights to
which you may be entitled and your statutory rights are not affected by this warranty. If you need
additional information concerning this written warranty, or assistance in obtaining services,
please write to : HAYTER LIMITED, Service Department, Spellbrook, Bishop's Stortford,
Hertfordshire CM23 4BU
UK ONLY: Details of your local Hayter authorised dealer are contained in Yellow Pages and the
1.7
Download from Www.Somanuals.com. All Manuals Search And Download.
111-1471 (C) 29/8/08 12:56 pm Page 1.8
SAFETY PRECAUTIONS
Safety Alert Symbol
This safety alert symbol indicates important safety messages. When
you see this symbol be alert to the possibility of injury. Carefully read
the following and inform others.
Your mower is perfectly safe if used correctly. Failure to observe the
following precautions may result in serious injury.
Training
Before using the mower read the owners handbook carefully. Pay
particular attention to the safety precautions. Ensure that you are
familiar with the controls and the proper use of the equipment. Learn
how to stop the mower quickly in an emergency.
Never allow children or people unfamiliar with these instructions to
use the mower.
Never mow while people, especially children, or pets are nearby.
Keep in mind that the user is responsible for accidents or hazards
occurring to other people or their property.
Preparation
While mowing, always wear substantial footwear and long trousers.
Do not operate the equipment when barefoot or wearing sandals.
Thoroughly inspect the area where the mower is to be used and remove
all objects which may be thrown by the machine.
WARNING: Petrol is highly flammable.
- Store fuel in containers specifically designed for this purpose.
- Before starting the engine add fuel outdoors only. Never remove the
cap from the fuel tank or add petrol while the engine is running or
when the engine is hot. Allow the engine to cool for at least two min-
utes before refuelling. Do not smoke while refueling.
- Do not attempt to start the engine if petrol is spilled or a smell of
petrol is present. Move the mower away from the area of spillage
and avoid creating any source of ignition until petrol vapours have
dissipated.
- Replace faulty silencers.
1.8
Download from Www.Somanuals.com. All Manuals Search And Download.
111-1471 (C) 29/8/08 12:56 pm Page 1.9
SAFETY PRECAUTIONS
Continued
Preparation
- Always use fresh fuel. Stale fuel can block the carburettor and cause
leakage.
- Replace fuel tank and oil tank caps securely.
A damaged cutterblade or loose fixing bolt are major hazards. Before
use, always visually inspect the cutting mechanism to ensure that it is
in good condition. A damaged cutterblade must be replaced immedi-
ately with a genuine Hayter replacement part.
Operation
Do not operate the engine in a confined space where exhaust fumes
(carbon monoxide) can collect. Refuel outdoors only and do not smoke
while refuelling.
Always pull the starter cord slowly until resistance is felt. Then pull
the cord rapidly to avoid kickback and prevent hand or arm injury.
Mow only in daylight or good artificial light.
Avoid using the mower on wet grass, where feasible.
Always be sure of your footing on slopes.
Walk, never run.
Mow across the face of slopes, never up and down.
Exercise extreme caution when changing direction on slopes.
Do not mow excessively steep slopes of more than 20 degrees.
Use extreme caution when reversing or pulling the mower towards you.
Stop the engine before moving the mower across areas other than grass.
Never operate the mower unless the guards are securely in position and
in good condition.
Do not change the engine governor settings or overspeed the engine.
Disengage the rear roller drive clutch before starting the engine.
Start the engine carefully, with feet well away from the cutterblade.
1.9
Download from Www.Somanuals.com. All Manuals Search And Download.
111-1471 (C) 29/8/08 12:56 pm Page 1.10
SAFETY PRECAUTIONS
Continued
Operation
Do not tilt the mower when starting the engine.
Do not put hands or feet near or under rotating parts.
Never pick up or carry the mower while the engine is running.
Never lift the rear deflector while the engine is running.
Never touch the exhaust/exhaust guard or cooling fins when the engine
is hot.
Stop the engine and disconnect the spark plug lead:
- Before clearing blockages or unclogging the discharge chute.
- Before cleaning/checking or working on the mower.
- After striking a foreign object. Inspect the mower for damage and
ensure necessary repairs are made before re-starting.
- If the mower starts to vibrate abnormally (check immediately).
Stop the engine:
- Whenever you leave the mower.
- Before refuelling.
Reduce throttle setting before shutdown.
Maintenance & Storage
Keep all nuts, bolts and screws tight to ensure that the equipment is in
safe operating condition.
Frequently check fuel lines and fittings for cracks or leaks and replace
if necessary.
Never check for a spark when the spark plug is removed. (Use approved
tester).
Inspect the exhaust periodically and replace if worn or leaking.
Never crank the engine with the spark plug removed.
Never start the engine with the air-cleaner or air-cleaner cover removed.
Never store the mower with petrol in the tank within an enclosed area
where fumes may reach an open flame or spark.
Replace worn or damaged parts for safety.
This machine contains spring loaded assemblies which could cause a
hazard when dis-assembled and re-assembled, this maintenance should
only be carried out by a Hayter authorised dealer.
1.10
Download from Www.Somanuals.com. All Manuals Search And Download.
111-1471 (C) 29/8/08 12:56 pm Page 1.11
SAFETY PRECAUTIONS
Maintenance & Storage
Continued
Allow the engine to cool before storing in any enclosure. To reduce the
fire hazard, keep the engine and the surrounding deck area free of
grass, leaves, or excessive grease.
Check the rear deflector and grassbag frequently for wear or deterioration.
Replace worn or damaged parts for safety.
If the fuel tank has to be drained, this should be done outdoors and
when the engine is cool.
Wear strong work gloves when removing and reassembling the cut-
terblade.
Always replace worn or faulty parts with genuine Hayter parts.
Safety Symbols
Danger of being hit by thrown
objects.
Safety Alert - Be aware to the
possibility of injury.
Danger of severing toes or fin-
gers in cutting mechanism.
Carefully read the Owners
Handbook before using the
machine.
Stop engine and remove spark
plug lead before working on
the mower.
Keep bystanders at a safe dis-
tance from the mower.
Information Symbols
Engine Stop
(Symbol)
Height of Cut Adjustment
(Symbol)
Throttle Control
(Symbol)
Variable Speed Control
(Symbol)
Choke Fast
Slow
STOP
305113
56Cth13a
1.11
Download from Www.Somanuals.com. All Manuals Search And Download.
111-1471 (C) 29/8/08 12:56 pm Page 1.12
ASSEMBLING THE MOWER
Delivery Checklist
Remove the mower from the packaging and check that the following
items have been supplied correctly. If any items are missing contact,
your local Hayter dealer.
1. Engine Handbook.
2. Grassbag.
3. Charger (561)
4. Ignition Key (561)
56CTH02B
To prevent accidents cut off the long ribbon attached to the grass-
bag and discard.
(561 Only) Note: Prior to first use please fully charge the battery for
14 hours. (Refer to battery charging)
Handlebar
Unscrew the handlebar securing knobs sufficiently to allow the handle-
bar to pivot. Move the engine stop lever away from the engine to avoid
damage and unfold the handlebar to the operating position. Make sure
the knobs are assembled to the outside of the handlebar and tighten to
secure in position.
Take care to ensure that the control cables do not become snagged at
the pivot point.
Grassbag Attachment
The grassbag is supplied in a partially assembled condition. Before
first use, attach plastic clips (A), (B) and (C) to grassbag frame.
A
B
HAY-G00102-A
C
Raise the rear deflector, lower the grassbag between the handlebar and
hook in position. Lower the deflector to rest on the grassbag.
56CTH03B
1.12
Download from Www.Somanuals.com. All Manuals Search And Download.
111-1471 (C) 29/8/08 12:56 pm Page 1.13
BEFORE STARTING THE MOWER
Prevent Engine Damage
To prevent engine damage the engine is shipped without oil or
petrol. The engine must be filled with the correct grade of oil and
petrol before starting the engine.
Oil Type
Always use high quality detergent oil classified SAE 30 oil. Never use
additives with recommended oil.
To prolong the life of your engine it is important that the oil is changed
after the first 5 hours of use - refer to ‘Maintenance Schedule’.
Check Oil Level
Clean around the oil filler cap before removing. With the mower on a
level surface, unscrew and remove the oil filler - dipstick. Wipe oil
from it with a clean cloth. Screw the oil filler - dipstick back in place,
then unscrew and remove it to check the oil level.
0.15
Litres
The oil level is correct when it is at the full mark on the dipstick.
DO NOT OVERFILL.
V15C
Fuel Type
Always use clean, fresh unleaded petrol. Purchase fuel in quantities
that can be used within 30 days. Never mix oil with petrol. For added
engine protection Briggs & Stratton recommend the use of their fuel
additive which is available from an authorised Briggs & Stratton
service dealer.
Fill to base of neck to allow for fuel expansion. Do not overfill the
fuel tank.
1.13
Download from Www.Somanuals.com. All Manuals Search And Download.
111-1471 (C) 29/8/08 12:56 pm Page 1.14
OPERATING THE MOWER
Controls
Operate all control levers several times and ensure that the cables
move freely. Check that the engine stop and ground drive clutch levers
return freely to their rest position when released.
Whilst operating the engine throttle mechanism slight resistance
should be felt when moving the lever to the ‘choke’
position.
IMPORTANT: To avoid damage to the cable the Variable speed
Control should only be operated whilst the engine is running.
Starting - Step 1
Move the throttle control lever to the ‘choke’ position before start-
ing a cold engine. Move the throttle control lever to the
position before starting a warm engine.
‘fast’
Step 2
Stand behind the mower and hold the handlebar together with the
engine stop lever with your left hand. With your right hand hold the
engine start - grip and pull slowly until resistance is felt, then pull
rapidly to crank the engine. Carefully return the start grip to the
storage position when the engine starts.
If the engine does not start after 5 attempts - refer to “Trouble
Shooting”.
The engine stop lever must be held firmly against the handlebar to
start and keep the engine running. If the engine stop lever is
released the engine will stop.
1.14
Download from Www.Somanuals.com. All Manuals Search And Download.
111-1471 (C) 29/8/08 12:56 pm Page 1.15
OPERATING THE MOWER
Step 3
Allow the engine to warm up and move the throttle lever to the
‘fast’ position after starting a cold engine.
To prevent damage never pull the engine start grip when the
engine is running.
Electric Start
(Electric start Only)
Stand behind the mower and hold the handlebar together with the
engine stop lever. Turn the ignition key in a clockwise direction and
hold in position to crank the engine. When the engine starts release the
key and move the throttle to the fast position after starting a cold
engine.
Note: Cranking the engine for more than 15 seconds in any one minute
can damage the starter motor.
If necessary the engine can be started manually without using the
ignition switch.
To prevent engine damage do not operate the ignition key when
the engine is running.
Forward Travel
Hold the handlebar and operate the ground drive clutch lever to power
the mower in a forward direction.
When the ground drive clutch lever is disengaged the mower may be
pushed. This feature is useful when mowing in confined areas.
Ground speed may be adjusted by operating the speed variator control.
Push forward to slow down and pull back to speed up. Only operate the
lever with the engine running to prevent damage.
If the engine stop lever is released the engine will stop.
1.15
Download from Www.Somanuals.com. All Manuals Search And Download.
111-1471 (C) 29/8/08 12:56 pm Page 1.16
OPERATING THE MOWER
Reverse Travel
Hold and pull against the handlebar with both hands to reverse the
mower.
Turning
To make a wide turn steer the mower with the handlebar in the
direction required.
To make a tight turn release the ground drive clutch lever, apply
downward pressure on the handlebar to raise the front wheels just
above ground level and steer in the required direction.
To prevent accidents do not raise the front of the mower exces-
sively when making a turn. Never raise the rear of the mower
when the engine is running.
Stopping
Release the ground drive clutch lever, reduce the throttle setting and
release the engine stop lever.
Emergency stop: Release both ground drive clutch lever and engine
stop lever together.
If the engine fails to stop, move the throttle lever to the ‘slow’
position and disconnect the spark plug lead.
STOP
1.16
Download from Www.Somanuals.com. All Manuals Search And Download.
111-1471 (C) 29/8/08 12:56 pm Page 1.17
OPERATING THE MOWER
Slopes
To prevent engine damage do not use the mower on slopes greater
than 20 degrees.
Height of Cut
To adjust the height of cut: Grip the lever and pull sideways to
disengage it from the locking notch, then push forwards to lower or
pull backwards to raise the height of cut. Finally release the lever at
the required position and ensure it locks firmly into one of the eight
setting notches.
Always select a height of cut to suit operating conditions. Aim to
prevent engine overloading and blockages by avoiding low cuts in
long grass conditions. Be prepared to make two cuts when the grass is
long.
305113
1.17
Download from Www.Somanuals.com. All Manuals Search And Download.
111-1471 (C) 29/8/08 12:56 pm Page 1.18
MOWER
OPERATING THE
Before Mowing
To prevent accidents, thoroughly inspect the area and remove all
objects which when contacted by the mower cutterblade could
become dangerous projectiles. Inspect the area for hidden obstruc-
tions which when contacted by the cutterblade could risk health
and safety or result in damage to the mower. Remember the loca-
tion of these obstructions and ensure that you mow around them.
Grassbag
Raise the rear deflector and lift the grassbag and lower the rear deflec-
tor to rest against the rear of the mower.
To empty the grassbag, pour out the grass clippings and shake the
grassbag vigorously to clean the airways. Good grass collection
depends on good air flow through the grassbag. When collecting grass
clippings it is important that the grassbag is emptied regularly to pre-
vent blockages and engine overloading.
56CTH11B
Without Grass Collection
Remove the grassbag and operate the mower with the rear deflector in
the closed position.
CS386
1.18
Download from Www.Somanuals.com. All Manuals Search And Download.
111-1471 (C) 29/8/08 12:56 pm Page 1.19
OPERATING THE MOWER
Heavy Growth
Areas of heavy growth should be mown without collecting the clip-
pings. If collection is required, first mow the area without the grassbag
at the maximum height of cut setting. Allow the grass clippings to dry
out and then mow the area at the maximum height of cut setting with
the grassbag fitted. Reduce the height of cut and mow the area again
as necessary until the required finish is obtained.
305113
To prevent damage to your lawn do not remove more than one third of
grass height in one cut.
Friction Disc
The cutterblade is driven by the engine via a friction disc to help pre-
vent damage occurring to the engine crankshaft and cutting mecha-
nism when a hidden obstruction or overload is encountered.
Always stop the engine when a hidden obstruction or excessive vibra-
tion is encountered. Disconnect the spark plug lead and examine the
cutting mechanism. ALWAYS replace a damaged cutterblade - refer to
“Maintenance”.
Non-Grassed Areas
When moving the mower across non-grassed areas, stop the engine
and set the mower to the maximum height of cut to protect the cutting
mechanism.
STOP
1.19
Download from Www.Somanuals.com. All Manuals Search And Download.
111-1471 (C) 29/8/08 12:56 pm Page 1.20
LAWN CARE CALENDAR
To be used as a guide only.
January
There is very little work to do this month apart from brushing away
leaves. Keep off the grass if frozen or waterlogged.
February
Rake the grass thoroughly. Spike the lawn to aerate and stimulate soil
organisms and root growth and apply lawn sand if necessary.
March
The yearly lawn work programme really starts this month. As soon as
the ground conditions are suitable, the first cut can be made. The first
cut should merely “top” the grass as close cutting at this stage could
result in severe yellowing or browning. Two cuts are generally suffi-
cient this month.
April
Mow often enough to stop grass growing away. Dig out patches of
coarse grass or resistant weed. Re-seed bare patches.
May
Keep mowing increasing the frequency as required. Treat with selec-
tive weed killers or combined weed/feed preparations if you did not
feed the lawn in April.
June
Summer mowing should now be under way. It should be necessary to
mow the lawn twice a week. Raking before mowing is important this
month as the combined action keeps runners of clover under control.
Water the grass if necessary, and remember to soak thoroughly.
July
Treat the grass with the second application of fertiliser or weed
killer/fertiliser. Water when necessary and rake occasionally. As a gen-
eral rule the grass clippings should be removed each time you mow. If
weather conditions are dry and hot and the grass is weed free, leave the
clippings on the lawn to help maintain ground moisture.
1.20
Download from Www.Somanuals.com. All Manuals Search And Download.
111-1471 (C) 29/8/08 12:56 pm Page 1.21
LAWN CARE CALENDAR
August
Keep mowing regularly and watering as necessary. Fill any cracks
caused by drought with a mixture of sharp sand and soil. In dry
weather conditions leave the grass longer to help retain ground mois-
ture.
September
Raise the height of cut to allow the grass to thicken and protect the
roots from the winter frost and snow.
October
Rake out the thatch from the turf and spike the lawn to assist in
drainage. Brush in peat and sharp sand.
November
Use a stiff broom to disperse worm casts before mowing. Keep turf
free from leaves.
December
Apart from brushing away leaves, December is a slack end of a busy
year. Keep off the lawn if it is very wet or frozen.
Lawn Stripes
1
2
The way to achieve a neat striped effect is for the lawn being cut in
parallel stripes, alternate stripes being mown in opposite directions.
A much more important routine is to cut at right angles to the line of
the previous mowing. If the work has been carried in a north-south
line, then the next cutting should be in an east-west direction. The
cross-cutting keeps down the coarse weed grasses.
1CG480V05A
To prevent grass damage do not remove more than one third of
the grass height in one cut.
1.21
Download from Www.Somanuals.com. All Manuals Search And Download.
111-1471 (C) 29/8/08 12:56 pm Page 1.22
MAINTENANCE SCHEDULE
Follow the hourly or calendar intervals, whichever occurs first. More
frequent service will be required if working for prolonged periods under
dusty, dry conditions, or when airborne debris is present or after exten-
sive operation cutting tall, dry grass.
First 5Hrs
After the very first five hours change the engine oil
After the very first five hours check the clutch adjustment. (See 1.26)
Daily
Check the oil level
Remove grass debris from around the engine, exhaust/exhaust guard, air
ways in the top cowl and underside of the deck housing.
Remove grass debris from the grassbag and check for signs of damage.
Check the condition of guards and safety devices.
Check condition of cutterblade.
25Hrs or Every Season
Change the engine oil if continuously operating under heavy load or
high ambient temperature.
Service the air cleaner.
Lubricate wheels, pivot points and linkages and grease the inner control
cables at point of entry and exit from their outer casing.
Check the clutch cable adjustment.
Sharpen the cutterblade.
50Hrs or Every Season
Change the engine oil.
100Hrs or Every Season
Clean the engine cooling system. Clean more often under dusty condi-
tions or when airborne debris is present or after prolonged operation
whilst cutting tall, dry grass.
Replace the spark plug.
1.22
Download from Www.Somanuals.com. All Manuals Search And Download.
111-1471 (C) 29/8/08 12:56 pm Page 1.23
MOWER MAINTENANCE
To prevent accidents stop the engine and disconnect the spark
plug lead before attempting to carry out maintenance proce-
dures on the mower.
Engine
8
7
1. Air Cleaner
2. Spark Plug / Lead
3. Carburetor
4. Exhaust Guard
5. Exhaust
9
6
1
6. Oil fill/Dipstick
7. Start Grip
8. Fuel Cap
2
9. Cover
3
4
5
Throttle Cable Adjustment
Loosen casing clamp screw (1) and move the governor lever (2) in
the direction of screw (1) as far as possible. Move the throttle con-
trol to the choke position. Tighten casing clamp screw.
1
2
Carburettor Adjustments
Should only be made by an authorised Briggs & Stratton dealer.
Under no circumstances should the engine be adjusted to run at a
speed in excess of that shown on the Declaration of Conformity.
1.23
Download from Www.Somanuals.com. All Manuals Search And Download.
111-1471 (C) 29/8/08 12:56 pm Page 1.24
MAINTENANCE
MOWER
Oil Service
Check the oil level daily before starting the engine and ensure that the
correct oil level is maintained. Refer to-‘Before Starting the Mower’
for oil checking and filling instructions.
Change the engine oil after the first 5 hours of operation and thereafter
according to the ‘Maintenance Schedule’:-
1. Drain fuel by running the engine until the fuel tank is empty.
2. Remove the spark plug lead.
3. Allow the engine to cool.
4. Drain the oil while the engine is warm (not hot).
5. Tip the mower over on to its left hand side thus ensuring that
the air cleaner is kept uppermost to prevent engine damage.
6. Remove the oil filler dipstick and drain the oil into a suitable
container.
7. Refill with new oil of the recommended SAE viscosity grade.
(Refer to-‘Before Starting the Mower’)
Air Cleaner Service
1
To service the air cleaner, loosen the two screws (1) and remove cover
(2). Carefully remove pre-cleaner (3) and cartridge (4) wash in a solu-
tion of liquid detergent and water. Allow to air dry thoroughly before
fitting.
2
3
4
5
If very dirty, replace.
- Do not use petroleum solvents.
- Do not use pressurised air.
- Do not oil the cartridge.
After servicing, install the pre-cleaner and cartridge in the assembly
base (5). Replace the cover and securely tighten the screw to the base.
1.24
Download from Www.Somanuals.com. All Manuals Search And Download.
111-1471 (C) 29/8/08 12:56 pm Page 1.25
MOWER MAINTENANCE
Spark Plug Service
Use only Briggs & Stratton spark tester (1) to check for a spark as
shown in the diagram.
Replace the spark plug every 100 hours or every season, whichever
occurs first. A spark plug wrench is available from any authorised
Briggs & Stratton service dealer.
1
Check the spark plug gap with a feeler gauge and set at 0.50mm.
Keeping Engine Clean
Remove all grass and debris from the engine including the
exhaust/exhaust guard, the air ways in the top cowl and the surround-
ing deck areas on a daily basis after use. Never spray the engine with
water during cleaning. Water can contaminate the fuel. Always clean
with a brush or compressed air.
Grass and debris may clog the engine’s air cooling system especially
after prolonged operation while cutting tall, dry grass. The internal cool-
ing fins and surfaces may require cleaning to prevent overheating and
engine damage. We recommended that this service be carried out by an
authorised Hayter Service dealer.
Grassbag
Remove grass debris from the grassbag immediately after use and
check its condition for signs of damage.
To prevent accidents replace a damaged grassbag immediately.
56CTH12B
1.25
Download from Www.Somanuals.com. All Manuals Search And Download.
111-1471 (C) 29/8/08 12:56 pm Page 1.26
MAINTENANCE
MOWER
Deck Housing
Remove grass debris from the top and underside of the deck housing
immediately after use.
Fertilisers and top dressings are particularly corrosive.
Thoroughly clean the mower deck immediately after use on treat-
ed grass and store well away from corrosive materials.
Securing Nuts & Bolts
Regularly check that all securing nuts and bolts are tight. Replace
missing or damaged items immediately.
1CG480V36B
Clutch Cable Adjustment
60mm
Fig 1
At any time the operator feels that the machine is loosing drive:
1. Stop the engine.
2. Pull the machine backwards at the same time progressively
engage the clutch lever until the rear rollers lock, at this point the
clutch lever should be 60mm from the handlebar. Refer to Fig 1.
1.26
Download from Www.Somanuals.com. All Manuals Search And Download.
111-1471 (C) 29/8/08 12:56 pm Page 1.27
MOWER MAINTENANCE
Clutch Cable Adjustment
Continued
Fig. 2
3. If the distance between the clutch lever and handlebar is less than
60mm regulate the engagement position with the black plastic
cable adjuster. Refer to Fig 1 and 2 to regain the 60mm distance.
1
13mm
Fig. 3
extension
4. Note this is a temporary adjustment and at the nearest
opportunity a service should be carried out to ensure the spring
on the clutch cable is attached to the gearbox clutch. This
adjustment should be done using the metal adjuster at the control
with the plastic adjuster reset fully wound in. When the spring is
set tighten the inner lock nut to secure position.
Clutch
spring
HAY-G00147-A
Fig. 4
Clutch lever
fully engaged
Metal
adjuster
Tighten the inner
nut when the cable
spring is set.
HAY-G00146-A
Lubrication
Lubricate the wheels, pivot points and linkages with engine oil every
25 operating hours.
Apply a good quality medium grease to the inner control cables at the
point of entry and exit from their outer casing.
1.27
Download from Www.Somanuals.com. All Manuals Search And Download.
111-1471 (C) 29/8/08 12:56 pm Page 1.28
MAINTENANCE
MOWER
Cutterblade Removal
Drain the fuel by running the engine until the fuel tank is empty and the
engine stops. Remove the spark plug lead and allow the engine to
cool. Turn the mower on its left hand side and ensure that the air clean-
er side of the engine is uppermost.
Firmly grip the end of the cutterblade with the gloved hand and remove
the bolt, spring washer and distance piece securing the cutterblade with
a 9/16” A/F spanner.
To prevent accidents never work on the cutterblade unless the
spark plug lead has been removed. The cutterblade has sharp
edges. ALWAYS wear strong gloves to protect your hands when
working on the cutterblade. DO NOT rotate tools towards the cut-
ting edges to avoid the risk of injury should the tool slip. ALWAYS
use genuine Hayter replacement parts.
The condition of the cutterblade and its mounting arrangement should
be checked regularly for signs of wear or damage. Ensure that the cut-
terblade is not bent or cracked.
A damaged cutterblade that is out of balance will vibrate excessively
and may break. DO NOT use an unbalanced cutterblade.
Regularly check that the bolt securing the cutterblade is tightened to the
specified torque of 54Nm.
Replace the cutterblade every 2 years of sooner if excessively worn or
damaged.
To prevent injury it is wise to seek assistance when turning the mower
on its side.
Cutterblade Assembly
Assemble the cutterblade with the turned up edges facing towards the
engine. Secure the cutterblade using the bolt (1), spring washer (2), and
distance piece (3) and tighten to a torque of 54Nm.
1
3
2
1.28
Download from Www.Somanuals.com. All Manuals Search And Download.
111-1471 (C) 29/8/08 12:56 pm Page 1.29
MOWER MAINTENANCE
Cutterblade Sharpening
A slightly worn cutterblade may be re-sharpened. Both blade edges
must be sharpened equally to ensure balance. Sharpen the cutterblade
every 25 mowing hours or more frequently if conditions require.
Remove the cutterblade from the mower and clean using a brush and
water. Inspect the cutterblade for signs of damage.
30-45
Sharpen both cutting edges with a flat file to restore performance.
Ensure that the cutterblade is balanced. Use a screw driver with a
round shaft to support the cutterblade through its centre hole. Hold the
cutterblade horizontal and then release. A balanced cutterblade will
remain horizontal.
If the cutterblade is not balanced the heavy end will rotate downwards.
Sharpen the heavy end until the cutterblade is correctly balanced.
1.29
Download from Www.Somanuals.com. All Manuals Search And Download.
111-1471 (C) 29/8/08 12:56 pm Page 1.30
MAINTENANCE
MOWER
Storage
To store the handlebar unscrew the 2 small securing knobs sufficient-
ly to allow it to be pivoted forwards to rest against the mower. Take
care to ensure that the control cables do not become snagged at the
pivot point and depress the engine stop lever to prevent it being dam-
aged through contact with the engine.
Engines stored in excess of 30 days need to be protected with Briggs &
Stratton fuel additive or drained of fuel to prevent gum from forming in
the fuel system or on essential carburettor parts. To ensure your mower
is maintained in good working order it is important that the following
procedure is adopted. Refer to the Maintenance section as necessary.
Drain fuel from the engine by operating the engine until it stops.
Disconnect the spark plug lead.
Change the engine oil.
Remove the engine spark plug and pour 15ml of engine oil into the
engine cylinder and replace the spark plug. Do not exceed the stated
volume of oil as engine damage may occur on re-starting. Do not
replace the spark plug lead. Slowly pull the engine start - grip once
to crank the engine. This will distribute the oil and help prevent engine
corrosion.
Clean grass and debris from the engine cylinder, cylinder head cooling
fins, under top cowl, and around and behind exhaust/exhaust guard.
Clean all other areas of the mower and ensure that the grassbag is clean.
Lubricate the mower.
Treat metal parts with a water repellent anti-corrosion product.
Cover the mower with a protective sheet and store it in a dry, ventilat-
ed area.
(Electric Start Only)
Charge the battery
Disconnect the battery leads
1.30
Download from Www.Somanuals.com. All Manuals Search And Download.
111-1471 (C) 29/8/08 12:56 pm Page 1.31
MOWER MAINTENANCE
Battery charging
(561 only) - PREVENT ACCIDENTS: ALWAYS charge the battery
in a well ventilated area.
14hrs
NEVER charge the battery near naked flames or direct heat.
ALWAYS switch off the mains electricity supply before disconnect-
ing the charger from the battery.
ALWAYS use the battery charger supplied with the mower.
Battery charging should not be necessary during normal use. The
engine operation will automatically charge the battery. If the mower is
stored for a long period recharging the battery may be necessary to per-
mit electric starting.
Charge the battery only when necessary.
To recharge the battery:
Disconnect the battery lead from the mower lead and then connect the
battery lead to the charger.
Connect the charger plug to the mains electricity supply and switch on
to charge the battery for a fourteen hour period.
Switch off the mains electricity supply and disconnect the charger
plug.
Disconnect the battery lead from the charger and then connect
the battery lead to the mower lead.
IMPORTANT - PREVENT DAMAGE: NEVER connect the bat-
tery charger to the engine lead as this will cause the charger to be
permanently damaged. Chargers damaged in this manner will not
be replaced under warranty.
CAUTION - PREVENT ENVIRONMENTAL DAMAGE: The
battery and charger have a separate collection mark. This indi-
cates that for disposal of the battery and battery charger they must
be taken to an authorised disposal site. They must not be disposed
of with general waste.
EU Directive 2002/96/EC classifies this product as an electrical or elec-
tronic equipment.
(a) These products should not be disposed of as unsorted municipal waste.
(b) They should be taken to a designated collection point or recycling cen-
tre and handled according to national laws in the area.
(c) The consumer has a critical role in returning waste electronic/electrical
equipment for recycling and disposal.
(d) Recycling keeps these products out of the municipal waste stream.
(e) The crossed-out bin symbol is a reminder to follow these points.
(f) Please contact your local authority or local dealer and ask for further
details regarding the correct method of disposal.
1.31
Download from Www.Somanuals.com. All Manuals Search And Download.
111-1471 (C) 29/8/08 12:56 pm Page 1.32
TROUBLE SHOOTING
PROBLEM
POSSIBLE FAULT
Engine stop lever released.
Incorrect oil level.
REMEDY
Engine will not turn over
Operate engine stop lever.
Check oil level.
Obstruction under deck.
Remove obstruction.
Battery discharged (561 Only) Charge battery
Engine smokes
Excess oil level.
Check oil level.
Air cleaner cartridge oil
soaked or blocked.
Service air cleaner.
Engine runs then stops
Engine will not start
Fuel starvation.
Fill fuel tank.
Fuel cap vent blocked.
Clean fuel cap vent.
Engine under load.
Fuel starvation.
Raise height of cut.
Fill fuel tank.
Engine cold.
Set throttle to ‘choke’ position.
Incorrect/contaminated fuel.
Drain fuel tank and fill with
correct fuel.
Spark plug lead disconnected.
Throttle setting incorrect.
Engine brake not released.
Faulty spark plug.
Connect spark plug lead.
Set throttle to ‘fast’ position.
Operate engine brake lever.
Clean and adjust gap or replace.
Battery discharged (561 Only) Charge battery
Wiring fault.
Check wiring.
Engine runs rough
Spark plug lead becoming
disconnected in use.
Connect spark plug lead.
Faulty spark plug.
Clean and adjust gap or replace.
Service air cleaner.
Air cleaner blocked.
Incorrect/contaminated fuel.
Drain tank and fill with correct fuel.
1.32
Download from Www.Somanuals.com. All Manuals Search And Download.
111-1471 (C) 29/8/08 12:56 pm Page 1.33
TROUBLE SHOOTING
PROBLEM
POSSIBLE FAULT
Mounting bolts loose.
Cutterblade bolt loose.
Cutterblade out of balance.
Bent crankshaft.
REMEDY
Engine vibrates excessively
Tighten bolts
Tighten bolt
Balance cutterblade
Consult your dealer
Uneven cut
Undulating ground conditions
Cutterblade worn
Change direction of travel
Sharpen the cutterblade
Cutterblade out of balance
Wheels / roller damaged
Balance the cutterblade
Inspect and replace as necessary
Discharge chute blocks
Grass is wet
Mow dry grass
Cut height too low
Grassbag full
Increase cut height
Empty grassbag
Clean the grassbag
Airflow through the
grassbag is restricted
Engine speed too slow
Set throttle to fast position
Mower is hard to push
Mower will not self propel
Poor grass collection
Cut height too low
Increase cut height
Wheels / roller damaged
Inspect and replace as necessary
Clutch out of adjustment
Drive belt damaged
Adjust clutch cable
Replace drive belt
Airflow through the
grassbag is restricted
Clean the grassbag
Discharge chute blocked
Wet grass
Remove blockage
Mow in dryer conditions
Empty grassbag
Grassbag full
Engine speed too slow
Set throttle to fast position
1.33
Download from Www.Somanuals.com. All Manuals Search And Download.
111-1471 (C) 29/8/08 12:56 pm Page 1.34
DECLARATION OF CONFORMITY
EC DECLARATION OF CONFORMITY
Manufacturer: HAYTER LIMITED,
Address:
Spellbrook, Bishop’s Stortford, Herts. CM23 4BU. ENGLAND
declare that the lawnmower:
Model name:
Harrier 56
Harrier 56
Autodrive V/S
Pedestrian rotary
CODE 560F
56 cm
Autodrive E/S V/S
Pedestrian rotary
CODE 561F
56 cm
Type:
Model No:
Cutting width:
Speed of rotation of the
cutting device:
2750 rpm
2750 rpm
Engine manufacturer:
Speed of rotation of engine:
Briggs and Stratton
2750 rpm
Briggs and Stratton
2750 rpm
Complies with the provisions of Directive: 98/37/EC Essential Health & Safety Requirements Relating to the Design &
Construction of Machinery and Safety Components, as amended and the regulations transposed into national law.
Also Directive 89/336/EEC Electromagnetic Compatibility, as amended and the regulations transposed into national law.
Also Directive 2000/14/EC Noise emission in the environment by equipment for use outdoors and the regulations transposed into
national law.
Procedure applied for the conformity assessment: ANNEX VI, procedure 1.
Notified Body: Sound Research Laboratories Ltd. Holbrook House, Little Waldingfield,
Sudbury, Suffolk. CO10 0TH. ENGLAND
Notified body identification No: 1088
Measured sound power level:
Guaranteed sound power level:
98 dB(A)
98 dB(A)
98 dB(A)
98 dB(A)
Complies with harmonized standards: EN 292, EN 836 and EN ISO 14982
Signed
Date: 08.12.04
Declaration done and technical documentation kept at:
HAYTER LIMITED
Spellbrook, Bishop’s Stortford,
Herts. CM23 4BU ENGLAND
S.A Maryniak
(Technical Director)
VIBRATION INFORMATION
The vibration level at the operator contact positions, measured in accordance with European Standard EN 836
CODE560F - 3.24ms-2 CODE561F - 3.24ms-2
1.34
Download from Www.Somanuals.com. All Manuals Search And Download.
111-1471 (C) 29/8/08 12:56 pm Page 1.35
1.35
Download from Www.Somanuals.com. All Manuals Search And Download.
111-1471 (C) 29/8/08 12:56 pm Page 1.36
PARTS
LIST
UPPER MAINFRAME
Qty
560
Qty
561
Item No. Description
Part No.
Item Note
1
2
3
4
5
NUT M6 NYLOC P TYPE
BATTERY 12V
BATTERY COVER
BOLT HANDLEBAR
CABLE ENGINE BRAKE
CABLE ENGINE BRAKE
CABLE GUIDE
CABLE CLUTCH
CAP FOR M8 NUT BLACK
CLAMP PLATE
DECAL CAUTION
DEFLECTOR
ENGINE
ENGINE
ENGINE STOP LEVER
FRAME_GRASSBAG
GRASSBAG
09544
HY412009
560015
HY226024
111-0997
560041
1
0
1
2
1
0
4
1
2
2
1
1
1
0
1
1
1
1
2
1
1
2
2
2
2
1
1
1
4
2
3
2
2
1
1
1
2
2
0
0
2
1
1
1
0
1
1
1
0
2
1
1
1
2
0
1
2
1
2
2
1
1
0
1
1
1
1
1
2
1
1
2
2
2
2
1
1
1
4
2
3
2
2
1
1
1
2
2
1
1
2
1
1
1
3
1
1
1
2
2
6
7
8
410037
111-1469
HY234051
340028
111-0083
111-1714
111-1000
561019
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
340179
111-1497-03
111-1715
305093
111-1384-03
111-0519
111-1921-03
09379
09438
09441
340182
560018
09472
560017
09365
300144
09349
09687
09780
560040
410030
111-1194
480088
09688
561003
HY6426
300160
410087
GUIDE_ROPE
HANDLEBAR LOWER
HANDLEBAR UPPER
LEVER CLUTCH
BOLT M8 x 40 COACH
NUT M6 NYLOC ‘T’ TYPE
NUT M8 NYL INSERT T TYPE
PIN PIVOT
PLATE HOC RATCHET
M6 PLAIN WASHER
ROD DEFLECTOR
SCREW TAPTITE M6*16
PLUG
SCREW TAPTITE UNC 3/8"*1 1/4"
SCREW 06*20 PT PAN FLANGE
SETSCREW M6x55 POSI PAN Z&N
THROTTLE CONTROL
SPRING DEFLECTOR
SPEED CONTROL
HANDWHEEL
WASHER NYLON 19*11*1.6
SWITCH AND LOOM ASSEMBLY E/S
KEY IGNITION
PLUG HANDLEBAR
DECAL HAYTER ROYAL WARRANT
DECAL SERIAL NUMBER
DECAL ENGINE
STRIP FOAM
CABLE TIE
DECAL HEIGHT OF CUT
GRASSBAG ASSEMBLY
CABLE GUIDE
--------
111-0744
HY412012
HY3966
320006
111-1551
HY412008
0201086
INC 14,15
STARLOCK
1.36
Download from Www.Somanuals.com. All Manuals Search And Download.
111-1471 (C) 29/8/08 12:56 pm Page 1.37
UPPER MAINFRAME
PARTS LIST
19
36
23
13
31
30
36
30
32
18
16
23
25
1
21
28
38
47
31
6
21
35
5
39
47
34
7
17
44
8
22
9
35
4
42
39
4
15
12
37
17
8
22
9
46
11
10
26
3
27
48
2
33
43
41
27
14
20
48
24
20
40
45
29
1.37
Download from Www.Somanuals.com. All Manuals Search And Download.
111-1471 (C) 29/8/08 12:56 pm Page 1.38
PARTS
LOWER MAINFRAME
LIST
Item No. Description
Part No.
Qty
Qty
Item Note
560 561
1
2
3
4
5
6
7
8
9
AXLE FRONT WELD ASSY
560008
560037
111-1276
410069
111-1492
411024
09122
HY412003
560029
111-1861
411031
560012
411016
560027
560028
411013
340015
HY4014
340150
410057W
560014
111-1273
04020
410048
111-1251
1662
480134
560046
111-1398
340163
410076
111-1723-08
09544
1
1
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
2
2
1
1
1
1
1
4
1
2
1
2
1
2
1
1
1
1
2
1
37
2
8
1
2
1
1
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
2
2
1
1
1
1
1
4
1
2
1
2
1
2
1
1
1
1
2
1
37
2
8
1
2
BAR SPRING TENSION
BEARING 63001-2RS
BEARING FRONT AXLE
BEARING HOUSING
BELT VARIATOR 520
BOLT UNF 3/8"x2.1/4"
BRACKET CABLE
BRACKET CONN ROD
DUST COVER PLATE
BUSH PIVOT
CARRIER BLADE BOSS
CHAIN 40 PITCHES 3/8" INC LINK"
CLAMP UNDERDECK
ROD-CONNECTING
COVER DRIVE
CUTTER BLADE
DISTANCE PIECE
FREEWHEEL
FRICTION DISC
FRONT FINS
GEARBOX
GRIP FIX EXT 5/16"
HOUSING PIVOT BEARING - REAR AXLE
HUB CAP
KEY WOODRUFF
KNOB HOC
LEVER HOC
LEVER VARIABLE PULLEY
LOCKNUT
NUT M6 LUG
MAINFRAME
NUT M6
NUT M8 NYL INSERT T TYPE
NUT UNF 1/2" NYLOC EXT THIN5/16"
SPACER STEEL
OILITE BUSH ROLLER
PIN ROLL
PIN SELLOC SPRING
PLATE SECURING
ROLLER FRAME WELD ASSY
ROLLER SHELL ASSEMBLY
PIN
SCREW TAPTITE M6*16
SCREW TAPTITE M6*16 C/SK POZI
SCREW TAPTITE M6*20 W/HD
SCREW TAPTITE M8*25 HEX W/HD
SETSCREW M6X25
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
09441
HY4486
340157
340129
03997
HY03354
219037
111-1485-03
560031W
411023
09365
09545
09575
09787
09364
1.38
Download from Www.Somanuals.com. All Manuals Search And Download.
111-1471 (C) 29/8/08 12:56 pm Page 1.39
LOWER MAINFRAME
PARTS LIST
32
67
43
22
44
44
31
44
57
44
44
Detail A
44
56
31
44
27
28
44
10
11
5
46
8
14
44
34
53
29
60
47
52
31
26
46
41
40
44
5
45
55
3
39
46
51
1
68
12
59
23
6
63
9
25 35
66 64
33
61
24
33
61
15
45
44
38
24
66
54
44
2
48
1
16
44
46
4
46
4
64
66
65
66
37
21
44
46
42
49
63
19
58
50
36
35
25
46
19
30
44
44
44
42
44
20
37
65
44
17
18
62
7
1.39
Download from Www.Somanuals.com. All Manuals Search And Download.
111-1471 (C) 29/8/08 12:56 pm Page 1.40
PARTS
LOWER MAINFRAME
LIST
Item No. Description
Part No.
Qty
Qty
Item Note
560 561
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
SHAFT ROLLER WELDED
111-1717
340168
410050
480132
HY412004
411011
111-1552
560011V
560025
560026
411001
09270
09472
09273
0201086
111-1250
111-1860
111-1252
111-1941
111-1254
1
1
1
1
1
1
1
1
1
1
1
1
2
1
2
2
2
4
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
2
2
2
4
1
1
SHROUD-FREEWHEEL
SPRING COUNTER BALANCE
SPRING TORSION HOC
SPRING VARIATOR
SPROCKET 10T
SPROCKET 18T
THROWPLATE
UNDERDECK FIXED
UNDERDECK REMOVABLE
VARIATOR ASSEMBLY
WASHER PLAIN 5/16x1x16G
WASHER PLAIN M6
WASHER SPRING 3/8" SC
WASHER STARLOCK 5/16"
WHEEL WITH BEARINGS
DUST COVER PLATE
BEARINGS
2 PER WHEEL
PULLEY
V BELT Z502
INC
5,10,13,16,19,23,27,2
8,30,36,37,38,39,41,4
2,44,45,46,49,50,
52,53,54,55,65
69
70
KIT REAR ROLLER ASSY
KIT REAR ROLLER SHAFT ASSY
111-1922
111-1923
1
1
1
1
INC 19,30,36,49,50
1.40
Download from Www.Somanuals.com. All Manuals Search And Download.
111-1471 (C) 29/8/08 12:56 pm Page 1.41
LOWER MAINFRAME
PARTS LIST
32
67
43
22
44
44
31
57
44
44
44
44
Detail A
56
31
44
27
44
10
11
5
28
46
8
14
44
34
53
29
60
47
52
31
26
46
41
40
44
5
45
55
3
39
46
51
13
68
12
59
23
6
63
9
25 35
66 64
33
61
24
33
61
15
45
44
38
24
66
54
44
2
48
1
16
44
46
4
46
4
64
66
65
66
37
21
44
46
42
49
63
19
58
50
36
35
25
46
19
30
44
44
44
42
44
20
37
65
44
17
18
62
7
1.41
Download from Www.Somanuals.com. All Manuals Search And Download.
111-1471 (C) 29/8/08 12:56 pm Page 1.42
NOTES
1.42
Download from Www.Somanuals.com. All Manuals Search And Download.
111-1471 (C) 29/8/08 12:56 pm Page 1.43
NOTES
1.43
Download from Www.Somanuals.com. All Manuals Search And Download.
111-1471 (C) 29/8/08 12:56 pm Page 1.44
CUSTOMER INFORMATION /NOTES
Serial No:
Engine Type:-Series 825 (560F) Engine:- Briggs & Stratton
Engine Type:-Series 825 (561F) Engine:- Briggs & Stratton
Date of Sale:-
Your Local Dealer:-
Notes:-
1.44
Download from Www.Somanuals.com. All Manuals Search And Download.
|