Havis Shields Network Card C TCB MAK User Manual

INSTALL INSTRUCTIONS C-TCB-MAK  
MONITOR ADAPTER KIT  
FOR USE ON ALL STRAIGHT POLED C-TCB’S  
TOOLS REQUIRED:  
Ratcheting wrench  
T-20 torx bit  
Sockets - 7/16”, ½”  
3/16” Allen key  
Combination wrenches - 7/16”, ½”  
HARDWARE:  
ITEM #  
QTY  
DESCRIPTION  
PART #  
1
2
3
4
5
6
7
8
1
1
1
1
2
2
1
1
Rotating TCB plate  
Bolt/nut weldment  
5/16-24 Flex nut  
5/16-24 x 1” Socket head cap screw  
5/16” Belleville stainless washer  
5/16” x 2” Fender washer  
5/16-24 Hex jam nut  
CM93073-2  
CM001491  
CM86209  
CM86502  
GSM31092  
GSM31020  
GSM30070  
GSM30017  
5/16-18 nylock nut  
Always!  
Read all instructions before installing any Havis-Shields Equipment Corp products.  
Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes!  
Use hardware provided with install kit  
#5, 8  
#1  
#3, 4, 5, 6, 7  
#2  
Straight inner  
pole assembly  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Graco GPS Receiver 62 User Manual
Graco Inc Power Roller 243066 User Manual
Harbor Freight Tools Indoor Fireplace 91797 User Manual
Harbor Freight Tools Water Pump 46750 User Manual
Hearth and Home Technologies Egg Cooker BH 105 User Manual
Honeywell Digital Camera HCC 745NTW PTW User Manual
HP Hewlett Packard Computer Drive 92500 User Manual
Hunter Fan Fan 90121A User Manual
Hunter Fan Fan Type 7 User Manual
iLive MP3 Docking Station IT818B User Manual