Insert your WinTV Installation
CD-ROM, the installation window
will automatically appear.
ote: During the installati-
Non, other installation
wizards may open, we recom-
mend following the instructions
in each of these and installing
with the default options availa-
ble.
1. Connecting the WinTV-NOVA-TD
Please ensure that Windows XP or Windows Vista is correctly
installed and started before connecting the WinTV-NOVA-TD Stick to
your computers USB 2.0 port. Due to power and bandwidth require-
ment, we do not recommend connecting the unit into a USB Hub.
To install, locate a free USB 2.0 port (normally located at the side or
back on the computer). Plug the WinTV-NOVA-TD stick into the USB
2.0 port. You can use a USB extender cable to locate the WinTV-
NOVA-TD a short distance from the USB slot.
ote: If the autorun does
Nnot start, browse to the
files on the disc and double
click on the file called 'Setup'.
WinTV-NOVA-TD
ote: For advanced users
Nyou can select the 'Custom
Installation' which will allow
you to modify the list of appli-
cations that are installed by
default.
dual tuner
Quick Installation Guide
In the installation window click on
Step 1: Install WinTV Drivers.
A blue screen will open which will
begin installing and updating the
drivers for your product.
© 2008 Hauppauge Computer Works · QI-NOVA-TD-V2.0-ENG · 2008/02/05
ote: if you plug the device into a different USB socket, you
will need to reinstall the WinTV-NOVA-TD driver, but you
N
will not need to reload any WinTV applications.
Tech Support: (+44) 0207 378 0202
Hauppauge Computer Works, Ltd.
2. Connecting the Aerial
Telephone: (+44) 0207 378 1997
Fax: (+44) 0207 357 9171
10 Borough High Street
Bank Chambers
It is recommended to connect to
a roof top aerial during the first
time installation as this may pro-
vide a better signal quality then
the provided portable antenna.
You will need to ensure that you
are located in a area that has
London, UK, SE1 9QQ
Once the WinTV installation is complete, click OK then Exit in the
window "Hauppauge WinTV Installation CD". You should now be back
at your Windows desktop.
Tech Support: (+1) 631 434 3197
Telephone: (+1) 631 434 1600
Fax: (+1) 631 434 3198
Hauppauge Computer Works, Inc.
91 Cabot Court
Hauppauge, NY 11788
Once complete, a message appe-
ars in the bar. If this message is
Drivers have been updated
Successfully, click on the bar to
exit. If the message reports an
error, check the connection of
your WinTV, or contact our tech-
nical support.
Tech Support: (+65) 276 4412
Telephone: (+65) 276 9163
Fax: (+65) 276 9167
Hauppauge Digital Asia, Pte. Ltd.
Blk 1093, Lower Delta Road #04-05
Tiong Bahru Industrial Estate
Singapore 169204
Digital Terrestrial coverage.
Please visit www.dtg.org.uk/retailer/coverage.html
The WinTV-NOVA-TD adopts the revolutionary Diversity technology
which enormously improves mobile reception sensitivity when used
with indoor antenna reception or while on the move.
Included in this package
Next, click on Step 2: Install
WinTV and select your language
from the list. The setup window
should appear and begin to auto-
matically install the WinTV appli-
cations.
3. Install the WinTV Drivers and Applications
● WinTV-NOVA-TD unit
● USB extension cable
● TV antenna with IEC connector
● TV antenna with MCX connector
● Aerial 'Y' splitter
● Remote control
● Installations CD-ROM with:
· WinTV Application
ote: If you have any anti-virus software enabled, please dis-
Nable it during the installation of the software.
When you attach the WinTV-
NOVA, the Found New Hardware
Wizard will appear.
Click on Cancel.
· WinTV Utilities
● This installation guide
Page 1
Page 2
Page 3
Page 4
Place the antenna in a suitable
location, when you receive at
least one channel, go to the
WinTV channel manager, click
on Sources and DVB-T source,
to see Signal Status.
Unplug one of the antennas and
move the other one to have the
best quality level in Signal
Status. Unplug this antenna and
plug in the other one to now
optimize this antenna. Antennas
must be a slight distant apart
for best result.
®
Adding a TV channel manually
Plug your roof top aerial or
portable TV antenna into
the WinTV’s TV IEC
Connector.
TV Mode
4. New WinTV v6 Application
If the scan did not succeed, you can add a channel manually by enter-
ing the LCN number for your local transmitter. Enter your post code in
DVB-T of your country) to be presented with the local transmitters.
You need to write down the LCN numbers.
When you click the Full screen TV button, TV will appear full
screen on your PC monitor. When finished watching TV full screen,
click your right mouse button in the TV window. If you see video with
a black box around it, click the Pref button then click TV mode tab.
Check the box which says “Allow resolution change”.
To start the WinTV application double click on the WinTV icon.
When you run WinTV for the first
time, a message will appear ask-
ing you to scan for tuner chan-
nels now; please ensure that the
TV antenna is connected, click
YES.
In the WinTV Channel Manager, click on Sources and DVB-T Source,
enter the LCN numbers into the space under Channel Number and
click on the Tune button. The channel will be added only if the locked
box is checked after clicking Tune. If necessary, reposition your
portable antenna, for example near a window, to increase the recep-
tion quality.
"Always on top" Mode
Will always be visable on your Windows desktop on top any
applications. To turn on, click the Always on top button. It will turn
green. To turn off, click this button again.
Plug the portable TV antenna or
your roof top aerial, using the IEC
to MCX connector, into the
A convenient way to use Always-on-top is to make the TV window in
the no-title mode small, and to make the TV window in the title mode
larger. Then you can switch from a small window to a larger one by
clicking the right mouse button.
WinTV’s TV MCX Connector.
The minimum signal level to engage the Diversity mode is just 3
blocks on each antenna. When plugging the two antennas, the quality
level should then increase.
Pref button
Click the Pref button to open the preferences menu:
View: These are the settings for the On Screen Display of the TV
channel and Audio Volume, where you can enable Close Captions (if
supported in your system configuration), plus controls for the Toolbar
mode (Title mode), NoToolbar mode (No Title) and Full Screen (TV
mode).
Watch TV
Minimise
TV Mode
Volume
Channel up
Channel down
Channel surf
Last channel
Freeze picture
Remove toolbars
no title mode
Close
Movies: Here is where you configure some video and audio settings.
You can set the movie record directory (DVCR Record File Path).
Snapshot: Set the size of your captured images, plus single or two
field captures for capturing motion or still image video.
Always on Top
Mute
Click your right mouse button
in the TV window to remove
toolbars. Click again to
restore toolbars.
Pref: Configuration
Setup Menu
Audio: Your audio settings are configured here.
Select your country location, for instance, select United Kingdom and
then, select Scan.
The scanning process for DVB-T will scan from channels. When a
DVB-T channel is found, the Signal Status will show a quality level
and the locked box will be checked. The DVB-T digital channels that
are found will appear in the channel listing box.
Menu Button
CFG
Click the Menu button to open the TV setup menu. Here is the main
control bar for TV channels, and duplicate controls for other functions:
Suite-Manager: Configure the TV tuner (scanning, naming, channel
pre set, etc..) and setting up favourite channel lists.
Configuration: Duplicate configuration menus for colour, audio, etc.
View: For settings an exact TV window size: 320x240, 640x480 etc.
Configure Snapshot
Diversity Tool
Current TV channel
Click your right mouse
button here to see the
channel selector
Snapshot Still
capture
Increase reception on WinTV-NOVA-TD (Diversity mode)
You can use WinTV-NOVA-TD in
Snapshot viewer
window:
Double click on each
thumbnail to see
image full size.Click
and hold your right
mouse button to see
image options.
Diversity mode, this increase the
ote: If you have attached an antenna and do not receive any
digital TV channels, either use a stronger antenna (a roof
reception by using the two tuners
to create one clear signal.
N
top antenna is recommended for best reception) or try to
TV-Mode Pause Record Playback
For this, click on Start / All pro-
grams / Hauppauge WinTV and
Diversity Tool and select 'Use in
Diversity Mode'. This disable the
Dual Tuner function. Click OK and
restart your computer for your
changes to take effect.
add a TV channel manually.
Click Close when finished.
Changing channels
You can change channels by using the Channel Up or Channel Down
buttons on the WinTV. You can type a channel number (for example:
27) and WinTV will tune to that channel. If the entered channel does
not exist, you will see a black window.
You can also right click in the Current TV channel box, where you will
see a list of channels. Or type letters (for example: BBC) to access to
the list of the channels including these letters.
Page 6
Page 5
Page 7
Page 8
Pause Buffer
Skip Ahead
Pause
Record and Pause
The Pause buffer is space on your hard disk where video is stored
during the Pause mode. The maximum amount of time which your TV
program can be delayed is dependent upon how much storage space
you have set for the Pause buffer.
Clicking the Skip button will skip the video ahead 10 seconds.
Clicking the Pause button while Playing will pause your
audio/video.
There are three buttons to control the watching, recording and paus-
ing of TV. Clicking on the Pause button will cause the Pause menu to
roll down from the WinTV application, while clicking on the Record
button will cause the Record menu to roll down.
Rewind
Clicking the Rewind button while playing video will rewind the
recorded video. Clicking the Rewind button again will continue the
playing.
Rewind
Clicking the Rewind button will play the video file in reverse.
Clicking the Rewind button again will continue the playing of the
video.
Clicking the Pause button makes WinTV to start recording into WinTV's
Replay Buffer. It takes about 10 seconds for the Replay Buffer to be ini-
tialized and for Pause to become effective.
Unclicking the Pause button will cause the audio/video program to
start playing from the point where the button was originally pushed.
Most WinTV functions are active while in the Pause or Pause Live
mode. For example, you can change volume, resize the TV window,
go into "no-title mode", etc.
While in Pause mode, the Video Position bar shows the amount of the
Replay Buffer which is filled with video. For example, if the Video
Position indicator shows halfway, it means that half of the Replay
Buffer is filled. If you find you cannot Pause as many minutes as you
would like, increase the size of the Replay Buffer.
Record and Playback
Slow Motion
Clicking the Slow Motion button while playing video will play in
Slow Motion. Clicking the Slow Motion button again, will continue
playing normally.
Fast Forward
Clicking the Fast Foward button one time will fast foward your
video at 2X speed. Clicking the Fast Foward button two times will fast
foward your video at 8X speed. Clicking the button again will continue
playing back at normal speed.
TV Mode
One Touch Pause One Touch Record
The One Touch Pause button prepares the WinTV pausing live video.
The One Touch Record OTR) button will start a record session. If you
click OTR more than once, a record timer will be set and the record-
ing will be done for 15 minutes for each time the OTR button is
clicked. For example, if you click the button 3 times, the WinTV will
record for 30 minutes.
Fast Forward
Clicking the Fast Forward button one time will fast forward your
video at 2X speed. Clicking the Fast Forward button two times will fast
forward your video at 8X speed.
Slow Motion
Clicking the Slow Motion button during playback will cause the
video to play in slow motion (at 1/2 speed). Clicking the Slow Motion
button again will return the video to normal playback speed.
Keyboard shortcuts
Click on the One Touch Record button on the WinTV application to
open the Record and Playback control bar.
While in Pause mode, the A/V stream is always saved in the Replay
Buffer. To stop saving the A/V stream in the Replay Buffer, you must
exit the Pause mode by clicking TV mode.
File button
Sound up - Page Up
Sound down - Page Down
Plus (+) - Chanel Up
Minus (-) - Channel Down
Ctrl T - Frame TV
Ctrl F - Still image
Clicking the File button opens the File menu. The last file record-
ed is listed in the File name box. In the File menu you can:
Ctrl M - Default settings
Alt M - Re-size TV menu
0-9 - Channel number
Space bar - Take a Snapshot
One Touch Record
● Rename your recorded video file: To rename a video file, find the
file you would like to rename, highlight it with your mouse, and click
and hold the right mouse button. Go down to Rename and then you
can type in a new name. Remember: you must keep the MPG
extension on the file.
● Play a video file previously recorded: Find the file you would like to
play, highlight it with your mouse (one click of the mouse button)
and click Open. Then click the Play button.
Display Counter
Replay
File
While in the Pause mode, hitting the Replay button acts like the
Instant Replay you see on TV broadcast sporting events: the
audio/video goes back in time and you repeat what you have previ-
ously seen. Each click of the Replay button causes audio/video to go
back 10 seconds. For example, if you want to repeat the audio/video
you saw 10 seconds ago, you would click the Replay button once. If
you want to see the video you saw one minute ago, you would need
to click the Replay button six times.
Ctrl P - Frame Print
Stop
Rewind Pause
Play Forward
Video-Position
Play forward slow
Clicking the Record button will automatically generate a file name and
start recording your audio/video program.
Functions:
● When recording TV, the record button will depressed
● A time counter will be shown indicating the lenght of time of the
recording
● Delete recorded video files which you no longer want: Click your
right mouse button on the video file once, go down the menu and
click Delete.
For extended replay times, you might find it more convenient to grab
the Video Position indicator control bar and move it to the left. Once
you let the control bar go, audio/video starts to play (it might take a
few seconds for the WinTV application to start playing).
You might have to move the Video Position indicator to the left and
right to find the desired spot to start replaying audio/video.
While Replaying, your audio/video program continues to be recorded
in the Replay Buffer. Therefore, if you have clicked the Replay button 3
times (so that you are replaying the audio/video seen 30 seconds
ago), the video you see in the WinTV window will be 30 seconds
behind the live program.
One Touch Pause
If you click Stop the time counter will revert back to 00:00:00
The time is specified in a Hour:Minute:Second format.
The pause mode allow you to pause the Live TV picture and allows
you to use the TimeShift function to rewind and fast forward the TV.
Clicking the Pause button on the WinTV application starts the Pause
mode. The Pause Menu will drop down.
Stop
Clicking the Stop button will stop the video you are recording or
playing back.
Time counter
Skip forward 10 sec
Play
Fast forward
Clicking the Play button will playback from disk the last video file
created. When playing a video, you can rewind, fast forward, replay
10 sec or skip forward 10 sec using the buttons on the control bar.
Video-position
Fast rewind Pause
Play Fast forward
Slow motion
Download from Www.Somanuals.com. All Manuals Search And Download.
Page 9
Page 10
Page 11
Page 12
|