the minutes by pressing the Mode button. When the
minutes are correct press the Set button to confirm.
Now the time and date are set!
If you want to check the date, press the Mode button.
Press it again to check the seconds, and one more time
to return to the clock.
NOTE: Once the time and date are set, the LCD display
will only show the time. You may still press the
Set button to cycle through and see the date if
you wish.
If you would like the time and date to alternate
one at a time on the LCD screen automatically,
simply press the Set button once. The date will
flash for 2 seconds and then the time will flash
for 2 seconds. This will continue until the Mode
or Set buttons are pressed again.
Micro Music Watch
Micro Music Watch
Ages 5 & Up
Item No. 59947
Instruction
Instruction
To play a HitClips Micro Music Clip:
Carefully insert the HitClips chip into the slot. Plug the
earbud jack into the proper hole. Play and stop by
pressing the Play/Stop button. Adjust the volume by
using the Volume Control switch (low and high).
We hope you enjoy your new
HitClips watch - it's a functioning
timepiece as well as a portable
micro music mix music player!
Just put it on and you're good to go!
To eject a HitClips Micro Music Clip:
Press the Stop button to stop the music, then press the
Eject button and carefully remove the HitClips Micro
Music Clip.
Includes: Watch
Earbud headset
HitClips Micro Music Clip
Battery Installation
2
3
4
1
5
1. Mode and Set buttons
(bottom and top buttons near clock)
2. Play/stop button
3. Volume control switch
4. Eject button
5. Headphone (plug-in)
1. Unscrew battery door. (see diagram)
2. Remove used batteries and dispose of properly.
3. Insert 1 new CR2032 and 1 GP364 / SR60 batteries.
4. Replace batteries door and tighten screw.
Watch functions
To ensure proper function
There are two buttons by the clock
display, the MODE button (top) and the
SET button (bottom). You may need to
use a fine point to press the buttons,
such as a ball-point pen.
• Do not mix old and new batteries.
• Do not mix alkaline, standard, or rechargeable batteries.
• Battery installation should be done by an adult.
• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries are to be removed from the
toy before being charged (if removable).
To set the date:
Press the Set button (bottom) twice. You should now
see a number that represents the month. Press the
Mode button to cycle the months to the correct one.
When you have reached the right number, press the
Set button to move to the day. Press the Mode button
to cycle through until you reach the correct day. Press
the Set button to confirm your choice.
• Rechargeable batteries are only to be charged under
adult supervision (if removable)
• Only batteries of the same or equivalent type as
recommended are to be used.
• Batteries are to be inserted with correct polarity.
• Exhausted batteries are to be removed from the toy.
• The supply terminals are not to be short-circuited.
To set the time:
After setting the month and day, the display will
automatically change, allowing you to set the hour
(12-hour cycle, including a.m. and p.m.). Press the Mode
button to cycle through the hours to the correct one.
• Do not dispose of
batteries in fire,
batteries may explode
or leak.
Download from Www.Somanuals.com. All Manuals Search And Download.
Press the Set button to move to minutes. Cycle through
90-Day Limited Warranty
FCC Statement
Tiger Electronics(Tiger) warrants to the original
consumer purchaser of this product that the product
will be free from defects in materials or workmanship
for 90 days from the date of original purchase. This
warranty does not cover damages resulting from
accident, negligence, improper service or use or other
causes not arising out of defects in materials
or workmanship.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful
interference, and
(2) This device must accept any interference received,
including interference that may cause
undesired operation.
Warning: Changes or modifications to this unit not
expressly approved by the party responsible for
compliance could void the user's authority to operate
the equipment.
During this 90-day warranty period, the product will
either be repaired or replaced (at Tiger's option) without
charge to the purchaser, when returned with proof of
the date of purchase to either the dealer or to Tiger.
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and , if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications.
Product returned to Tiger without proof of the date of
purchase or after the 90-day warranty period has
expired, but prior to one year from the original date
of purchase, will be repaired or replaced (at Tiger's
option) for a service fee of U.S. $10.00. Payments
must be by check or money order payable to
Tiger Electronics.
The foregoing states the purchaser's sole and exclusive
remedy for any breach of warranty with respect to
the product.
However, there is no guarantee that interference will
not occur in a particular installation. If this equipment
does cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try
to correct the interference by one or more of the
following measures:
All product returned must be shipped prepaid and
insured for loss or damage to:
Tiger Repair Department
1000 N. Butterfield Road, Unit 1023
Vernon Hills, IL 60061, USA
- Reorient or relocate the receiving antenna.
The product should be carefully packed in the original
box or other packing materials sufficient to avoid
damage during shipment. Include a complete written
description of the defect, a check if product is beyond
the 90-day warranty period, and your printed name,
address and telephone number.
- Increase the separation between the equipment
and receiver.
- Connect the equipment into an outlet on a circuit
different from that to which the receiver is needed.
- Consult the dealer or an experienced radio/TV
technician for help.
THIS WARRANTY IS IN LIEU OF ALL OTHER
WARRANTIES AND NO OTHER REPRESENTATIONS
OR CLAIMS OF ANY NATURE SHALL BE BINDING
ON OR OBLIGATE TIGER IN ANY WAY. ANY IMPLIED
WARRANTIES APPLICABLE TO THIS PRODUCT,
INCLUDING WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE, ARE
LIMITED TO THE NINETY (90) DAY PERIOD
DESCRIBED ABOVE. IN NO EVENT WILL TIGER BE
LIABLE FOR ANY SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES RESULTING FROM
POSSESSION, USE, OR MALFUNCTION OF
THIS PRODUCT.
For more information about Tiger Electronics, our
products and special promotions, please visit our web
Please retain instructions for future reference.
Some states do not allow limitations as to how long
an implied warranty lasts and/or exclusions or
limitations of incidental or consequential damages, so
the above limitations and/or exclusions of liability may
not apply to you. This warranty gives you specific
rights, and you may also have other rights, which vary,
from state to state.
A division of Hasbro, Inc.
Where Technology Comes to Play!™
®, TM, & © 2001 Tiger Electronics
All rights reserved.
980 Woodlands Parkway,
Vernon Hills, IL 60061, USA
200104020IWTI-02
PRINTED IN CHINA
Download from Www.Somanuals.com. All Manuals Search And DoPwn/Nloa2d.00104020IWTI-02
Back
|