TU 970
OWNER’S MANUAL
Power for the Digital Revolution®
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Congratulations! With the purchase of the
Harman Kardon TU 970 you are about to begin
many years of listening enjoyment.
Description and Features
The TU 970 is equipped with DAB (Digital Audio
Broadcast) and RDS (Radio Data System),
bringing a wide range of information to radio
listeners.
While sophisticated systems are hard at work
within the TU 970 to make all of this happen,
hookup and operation are simple.
Until now, analogue radio signals such as FM
or AM have been subject to numerous kinds of
interference on their way from the transmitter to
your radio. These problems were caused by
mountains, high-rise buildings and weather
conditions.
To obtain maximum enjoyment from your new
tuner, we urge you to take a few minutes to read
through this manual. This will ensure that
connections are made properly. In addition, a
few minutes spent learning the functions of the
various controls will enable you to take advan-
tage of all the power the TU 970 is able to deliver.
With DAB, you can now receive CD-like quality
radio programs without any annoying interference
and signal distortion.
If you have any questions about this product, its
installation or operation, please contact your
dealer. He is your best local source of information.
Now in use in many countries, RDS is a system
for transmitting station identification, a descrip-
tion of the station’s program type, indication of
national, regional or local programs and the
correct time. RDS also allows you to search for
favorite program types. A DOT-matrix display
brings all this information to you with high
visibility. As more FM stations become equipped
with RDS capabilities, the TU 970 will serve as
an easy to use center for both information and
entertainment.
INTRODUCTION 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Panel Controls
0 1
2
3
4
5
@
6
7
8
9
!
Power Indicator
System Power Control
Band selector
Info/RDS Button
Auto Tune Button
Information Display
Dimmer
Memory
Control Ring
Select
Remote Control Sensor
1
2
3
4
5
6
7
8
9
)
!
@
Function/FM Mode Selector
1
Power Indicator: This LED will illuminate in
5
Info/RDS Button: In DAB mode, pressing
) Control Ring: Turn counterclockwise to
amber when the unit is in the Standby mode to
signal that the unit is ready to be turned on.
When the unit is in operation, the indicator will
turn blue.
this button will change the content of the lower
display line of the Information Display. In RDS
mode, it will change between the different RDS
options.
tune lower frequency stations and clockwise to
tune higher frequency stations. When a station
with a strong signal is tuned, the Information
Display
7
will read TUNED. Turn again to
tune to the next frequency increment in Manual
Tune Mode, or automatically to the next sta-
tion with a signal strong enough for acceptable
reception in Auto Tune Mode. The ring also
controls the parameters in the different menus.
2
System Power Control: Press this button
6
Auto Tune Button: In DAB mode, press this
to turn on the TU 970; press it again to turn the
unit off (to Standby). Note that the Power Indi-
cator
the unit is on.
button to automatically scan all available local
stations. To scan for all available stations, keep
the button pressed for three seconds, until
AUTOSCAN FULL is shown in the Infor-
1
next to the switch will turn blue when
mation Display
7
.
! Select: In FM or AM mode, press this but-
ton to select Auto Tune, Manual Tune or Preset
Tune. In DAB mode, press this button to select
the displayed station.
3
Band Selector: Press this button to change
between the DAB, FM and AM frequency bands.
7 Information Display: This dual line display
delivers messages and status indications to help
you operate the tuner.
4
Function/FM Mode Selector: In DAB
mode, pressing this button will activate station
order, signal error rate, preset tune, software ver-
sion, Dynamic Rate Control or manual tune fea-
tures. In FM mode, press this button to select the
stereo or mono mode for FM tuning. In the
@
Remote Sensor Window: The sensor
8
Dimmer: Press this button to dim the front
behind this window receives infrared signals
from the remote control. Aim the remote at this
area and do not block or cover it unless an
external remote sensor is installed.
panel display. The first press of the button will
dim the displays to one-half normal brightness;
the next press will turn back to normal bright-
ness. The display will return to normal brightness
the next time the unit is turned on.
stereo mode, the word STEREO will be shown
in the Information Display
7, and stereo
reception will be provided when stations are
transmitting stereo signals. In the mono mode,
the left and right signals from stereo broadcasts
will be mixed together and reproduced through
all channels. Select MONO for better reception
of weak signals.
9
Memory Button: Press this button to open
the memory position that stores a preset loca-
tion in the tuner. 10 DAB presets can be stored,
as well as 30 FM and 30 AM presets. (See page
9 for more information on tuner presets.)
4 FRONT PANEL CONTROLS
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear Panel Connections
0
3 7
5
1 2
6
4
0
1
2
3
4
5
6
7
Optical and Coaxial Digital Outputs
FM Antenna
AM Antenna
DAB Antenna
AC Power Cord
Remote Control Output
Remote Control Input
Analog Audio Outputs
0
Optical and Coaxial Digital Outputs:
3
Analog Audio Outputs: Connect these
6
Remote Control Output: Connect this
Connect one of these jacks to the optical or
coaxial digital input of your pre amplifier or inte-
grated amplifier, if available.
jacks to the tuner input of your pre amplifier or
integrated amplifier for analog audio playback.
Be certain to observe proper channel connec-
tions using the color-coded cables and connec-
tors so that red connects right channels and
white connects left channels.
jack to the infrared (IR) input jack of another
compatible Harman Kardon remote controlled
product to have the built-in Remote Sensor on
the tuner provide IR signals to other compatible
products.
Note that these digital outputs only contain the
digital signal from the DAB stations. For FM/AM
reception, you will have to connect the analog
outputs at all times.
7
Remote Control Input: Connect the
NOTE: Before making any audio connections,
unplug all components of your audio system
from their AC power outlets. To reduce the possi-
bility of hum or noise in your system, place all
audio interconnection cables away from both AC
power cords and speaker wires.
output of a remote infrared sensor, or the
remote control output of another compatible
Harman Kardon product, to this jack. This will
enable the remote control to operate even when
the front panel Remote Sensor on the tuner is
blocked. This jack may also be used with
compatible IR remote control-based automation
systems.
1
FM Antenna: Connect an indoor or external
FM antenna to this terminal.
2
AM Antenna: Connect the AM loop anten-
na supplied with the receiver to these terminals.
If an external AM antenna is used, make connec-
tions to the AM and GND terminals in accor-
dance with the instructions supplied with the
antenna.
4
DAB Antenna: Connect a DAB antenna to
this terminal.
5
AC Power Cord: Connect this plug to an
AC outlet. If the outlet is controlled by a switch,
make certain that it is in the ON position.
REAR PANEL CONNECTIONS 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control Functions
0
Standby/Power On: Press this button to
turn on the TU 970; press it again to turn the
unit off (to Standby). Note that the Power Indi-
cator
1
next to the switch will turn blue when
the unit is on.
1
Numeric Keys: These buttons serve as a
ten-button numeric keypad to enter tuner preset
positions or to tune stations directly.
0
1
2
Clear Button: Press this button to clear
presets from your station list.
3
Info/RDS Button: Pressing this button will
change the content of the lower display line of
the Information Display.
4
Auto Tune Button: In DAB mode, press
this button to automatically scan all available
local stations. To scan for all available stations,
keep the button pressed for three seconds, until
AUTOSCAN FULL is shown in the Infor-
2
3
4
5
6
9
8
7
mation Display
7.
5
Scroll Buttons: Press L to tune lower
frequency stations and K to tune higher fre-
quency stations. When a station with a strong
signal is tuned, the Information Display
7
will read TUNED. Press again briefly to tune to
the next frequency increment in Manual Tune
Mode, or keep pressed for automatic search for
the next station with a signal strong enough for
acceptable reception in Auto Tune Mode.
These buttons also control the parameters in the
different menus, like the Control Ring
)
on
the front panel.
6
Function/FM Mode Selector: In DAB
mode, pressing this button will activate station
order, signal error rate, preset tune, software ver-
sion, Dynamic Rate Control or manual tune fea-
tures. In FM mode, press this button to select the
stereo or mono mode for FM tuning. In the
stereo mode, the word STEREO will be shown
in the Information Display
7, and stereo
reception will be provided when stations are
transmitting stereo signals. In the mono mode,
the left and right signals from stereo broadcasts
will be mixed together and reproduced through
all channels. Select MONO for better reception
of weak signals.
7
Band Selector: Press this button to
change between the DAB, FM and AM frequency
bands.
8
Select: In FM or AM mode, press this but-
ton to select Auto Tune, Manual Tune or Preset
Tune.
9
Memory Button: Press this button to
0
1
2
3
4
Standby/Power On
Numeric Keys
Clear Button
Info/RDS Button
Auto Tuning Button
5
6
7
8
9
Scroll Button
Function/FM Mode Selector
Band Selector
Select Button
Memory Button
open the memory position that stores a preset
location in the tuner. 10 DAB presets can be
stored, as well as 30 FM and 30 AM presets.
(See page 9 for more information on tuner pre-
sets.)
6 REMOTE CONTROL FUNCTIONS
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and Connections
Audio Equipment Connections
4. Connect a FM Antenna to the FM Antenna
connection. The FM antenna may be an
Audio Connections
We recommend that you use high-quality inter-
connect cables when making connections to
source equipment and recorders to preserve the
quality of the signals.
1
After unpacking the unit and placing it on a
solid surface capable of supporting its weight,
you will need to make the connections to your
pre amplifier or integrated amplifier. These steps
need to be done only when the tuner is first
installed.
external roof antenna, an inside powered or wire
lead antenna or a connection from a cable sys-
tem. Note that if the antenna or connection uses
300-ohm twin-lead cable, you need to use a
300-ohm-to-75-ohm adapter to make the con-
nection. The supplied antenna is for indoor use
only.
When making connections to audio source
equipment it is always a good practice to unplug
the unit from the AC wall outlet. This prevents
any possibility of accidentally sending audio or
transient signals to the speakers that may dam-
age them.
5. Connect a DAB Antenna to the DAB Anten-
na
4
connection. The supplied antenna is for
internal use only. Fix it to the wall in a vertical
direction. The strength of the incoming signal
can be shown on the Information Display by
1. Connect the analog output of the TU 970 to
the tuner input of your pre amplifier or integrat-
ed amplifier.
pressing the Select button
!8. The more
segments are visible in the lower display line, the
stronger the signal. By changing the position of
the antenna, you can increase the signal
strength. You can also opt for an external anten-
na, available at your dealer.
2. For DAB signals, connect the optical or coaxial
digital output of the TU 970 to an optical digital
audio input of your pre amplifier or integrated
amplifier, if available.
3. Assemble the AM Loop Antenna supplied with
the unit as shown below. Connect it to the AM
terminals
2.
When all connections are complete, plug the
power cord into a non-switched 230 Volt AC
wall outlet. You’re ready to enjoy the TU 970!
For best reception, place the antenna away from
the unit as well as from sources of RF emissions
such as a television or computer. It should also
be placed away from contact with any metal
object. In areas where signals are weak, an out-
door antenna may improve sound and reception
quality. Connect the antenna making certain to
also connect a ground wire to the GND termi-
nals.
INSTALLATION AND CONNECTIONS 7
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
DAB Operation
Basic Operation
Station List
Once the TU 970 has finished the scanning
sequence, it will display the available stations in
alphanumeric order. Turn the Control Ring
clockwise or counterclockwise to scroll through
the list of available stations. The upper display
line in the Information Display
show the current station you are listening to. The
lower display line shows the next station in the
list. To select the next station, simply press the
When you turn on the tuner, the tuner will ini-
tialize. During 2 seconds, the display will show
the following messages:
The TU 970 is simple to operate, and very similar
to tuners you may have used in the past. This
section will explain the use of several features
that may be new to you.
)
• Install the two supplied AAA batteries in the
remote as shown. Be certain to observe the (+)
and (–) polarity indicators shown in the bottom
of the battery compartment.
7
will always
After the initialization process, the tuner will per-
form an automatic scan for available local digital
radio stations. This sequence can not be inter-
rupted. During the sequence, the following mes-
sage will be visible on the display.
Select Button on the front panel
remote control
!
or on the
8
.
The current station list will remain in the memo-
ry of the TU 970. It can be updated by running
the Autotune function
6
4
as described
above, or deleted by resetting the TU 970’s
memory (see page 11).
NOTE: The station list can be shown in different
order. For more info, see page 9.
• When using the TU 970 for the first time, it
will be placed in a standby mode, as indicated
The arrows show the progress of the sequence.
On the right top side, you will see how many
digital stations have been found.
It can occur that one of the stations in your list is
temporarily not available. A “?” symbol will be
visible in front of the station name to indicate
such a station. If you select the station, the
by the amber color of the Power Indicator
1.
Once the unit is in standby, you may begin a lis-
tening session by pressing the System Power
Control
On button
that the Power Indicator
turn the unit off at the end of a listening session
simply press the System Power Control
on the front panel or the Standby button
on the remote. This places the unit in the Stand-
by mode, and the Power Indicator will turn
2
on the front panel or the Power
on the remote control. Note
will turn blue. To
Information Display
STATION NOT AVAILABLE, and will go
back to the current radio station.
7
will show
0
1
2
0
If no digital stations can be found, the display
will show NO STATIONS AVAILABLE
You can now select MANUAL TUNE by
pressing the Select Button or turn the
Control Ring to select AUTOTUNE
.
1
amber to remind you that the unit is ready for
operation when a power command is received
from the remote.
!
8
)
FULL or AUTOTUNE LOCAL to try to
manually find available stations.
When you will be away from home for an
extended period of time it is always a good idea
to completely turn the unit off by unplugging it
from the AC wall outlet. Note that the backup
system in the TU 970 will retain information
such as programmed presets for 14 days.
If no stations can be found, please check that
the antenna is connected correctly and if your
area is covered by DAB.
• To dim the brightness of the front panel dis-
play, press the Dimmer button
8
on the front
panel. The first press will dim the lights to half
normal. A second press will turn the display to
normal brightness again.
8 OPERATION
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Preset Setting
Function Control
Signal Error Rate
Besides having the TU 970 create a station list,
you can also store presents into the tuners memo-
ry.
The DAB mode in the TU 970 contains a menu
structure to access various system options. To
enter the menu, press the Function Button on
In this section you can see the level of correction
the TU 970 is applying to the DAB signal to
maintain the audio quality. The level will be indi-
cated by a numeric value between 0 (no correc-
tion) and 99 (maximum correction). For an
acceptable quality, the value of 50 should not be
exceeded.
the front panel
once. To scroll through the list of sections of the
menu, turn the Control Ring or press the
Scroll Buttons on the remote control . The
4
or on the remote control
6
1. Tune to the desired station with the Control
Ring
).
)
5
2. Press the Memory Button on the front
sections will be shown on the lower display line
in the Information Display. To enter a section
and see the options, press the Select Button
panel or on the remote control . You will
see the 01 segments in the Information
Display will start to blink.
9
9
7
Select button
!8. You can scroll through
the options with the Control Ring and activate
an option by pressing the Select Button once
that option is shown on the Information
Display.
Station Order
In this section you can select the way the station
list is displayed. The options are Favorite Station,
Alphanumeric, Active Station and Tidy Station.
3. Turn the Control Ring, until the desired
station preset is shown in the Information Display.
The desired preset can also be entered with the
Numeric Keys on the remote control
1.
4. Within 4 seconds, press the Memory Button
again to store the station in the memory.
The Favorite Station option will build the station
list based on the stations that you listen to most
of the time. These stations will be marked on the
Information Display with a “Y”-symbol. The
10 favorite stations will be moved to the start of
your station list, so you do not always have to
scroll through the whole list to find your favorite
station.
Information settings
The DAB signal contains besides the radio sta-
tion additional information. This information can
be made visible in the lower display line of the
Information Display
7.
The following information is available to display:
1. Dynamic Label Segment (DLS): scrolling text,
supplied by the broadcaster.
2. Program Type: describes the type of broad-
cast, e.g. Pop Music or Drama.
3. Multiplex Name: will show the name of the
multiplex of the broadcaster.
4. Time and Date.
5. Bitrate: shows the bitrate of the incoming
digital signal.
6. Channel and Frequency.
The Alphanumeric option is the default setting. It
will list the stations in numeric and alphabetical
order.
To change between the options, press the Info
Button on the front panel
5
or on the remote
control . Note that the upper display line will
3
The Active Station option will sort the station list
by quality of the signal. The stations with the
best reception will be shown on top of the list.
Stations with weak or no reception will be
moved to the bottom of the list.
always show the actual station. Pressing the
Info Button again will show the next option.
When you have found the information you
would like to display, press the Select Button
!
8
to activate the change.
The Tidy Station option will do the same as the
Active Station option, but will remove the sta-
tions in your area with no reception.
OPERATION 9
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Station Selection
1. Press the Band Selector
panel or on the remote control
either the FM or AM band.
Auto Preset
Preset Tune
3
7
on the front
to select
Preset stations may also be programmed auto-
matically for the entire FM band. To automatical-
ly enter each station that may be tuned with
acceptable quality into the TU 970’s preset
memories, first select the FM band. Next, press
In this section you can tune presets of stations
that broadcast only periodically, stations which
were not found during the Autotune process. If
you return to this preset in the future, and at
that time is does not broadcast, the display will
2. Press these buttons again at any time to
switch between AM, FM and DAB.
and hold the Memory Button
9
9
until the
show STATION NOT AVAILABLE
.
station frequency indication begins to increase.
Release the button and note that the tuner will
search the entire FM band, and stop briefly at
each station that has acceptable signal strength.
The TU 970 will automatically assign a preset
number to each station, and then search for the
next station.
3. Press the Select button
Auto Tune mode from the following options:
Manual Tune, Auto Tune or Preset Tune.
!
to select the
Software Version
This section allows a visual check of software
version installed in your TU 970. This might be
helpful in case servicing of your tuner may be
necessary.
4. To automatically search for the next higher- or
lower-frequency station that has an acceptable
signal turn the Control Ring on the front panel
Dynamic Range Control (DRC) Value
)
or press the Scroll buttons
5
on the
NOTE: Using the automatic tuning mode in
areas with more than 30 FM stations will com-
pletely fill the preset memories, and overwrite any
previously memorized presets for either AM or
FM stations.
In this section you can set the level of compres-
sion of stations to eliminate the differences in
dynamic range or sound level between radio sta-
tions. Popular music would normally be more
compressed than classical music, resulting in
possible different audio levels when changing
from one station to the other. Setting the DRC to
remote pressed and release it as soon as the
tuner starts the frequency search. To tune to the
next station, turn the ring again.
To manually search, select the Manual Tune
mode by pressing the Select button
!
until
TIP: The automatic scan process may enter
stations that you do not wish to retain in the
memory. These unwanted stations may be
removed from the memory by pressing the
the Information Display shows Manual Tune.
Turn the Control Ring to increment the fre-
quency step by step. When the Information
Display shows TUNED, the station is properly
tuned and should be heard with clarity.
0
means no compression, 1/2 indicates
medium compression and shows maximum
1
compression. No compression is recommended,
especially for classical music. Note that other
radio stations may be far louder, and make
therefore sure that amplifier levels are not set
too high when changing from one station to
another.
Memory Button
9
9
once the preset to be
deleted is shown on the display. Within 5
seconds press the Clear Button on the remote
NOTE: When the FM reception of a stereo sta-
tion is weak, the audio quality will be increased
by switching to Mono mode by pressing the FM
control
2
to confirm the deletion.
Recalling Preset Stations
Mode Selector
4
on the front panel so that
To manually select a station previously entered
in the preset memory, press the Numeric Keys
the STEREO indication changes to MONO
.
Manual Tune
In this section you can activate Manual Tuning,
in case the Autotune function is unable to find
any stations. You can also use Manual Tuning to
assist in positioning the antenna for best recep-
tion of a specific station.
Preset Tuning
1
that correspond to the desired station’s
Up to 30 FM and 30 AM stations may be stored
in the TU 970’s memory for easy recall using the
remote control. In order to program preset
stations into the memory, you must use the front
panel controls.
memory location. To manually tune through the
list of stored preset stations one by one, press
the Select Button
Display shows Preset Tune. Turn the Control
Ring or press the Scroll Buttons on
!
8
until the Information
)
5
FM/AM Tuner Operation
the remote control to scroll through the list of
presets.
The TU 970’s tuner is capable of tuning AM, FM
and FM Stereo broadcast stations. Stations may
be tuned manually or automatically, or they may
be stored as favorite station presets and recalled
from a 30-position memory.
To enter a station into the memory, first tune the
station using the steps outlined above. Then:
1. Press the Memory Button
panel or on the remote control
9 on the front
9. Note that
CH01 starts blinking in the lower display line
of the Information Display.
2. Within four seconds, turn the Control Ring
)
until the Information Display shows the
corresponding location where you wish to store
this station’s frequency.
3. Press the Memory Button again to confirm.
4. Repeat the process after tuning any additional
stations to be preset.
10 OPERATION
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
• In any FM mode the RDS function requires a
strong enough signal for proper operation. If you
receive a partial message or see any RDS indica-
tor going on and off, try slowly adjusting the
antenna to improve the signal strength or tune
to another, stronger, RDS station.
You may search for a specific Program Type
(PTY) by following these steps:
RDS Operation
RDS (Radio Data System) transmits station call
signs or network information, station program
type, text messages about the station or
specifics of a musical selection and the correct
time.
1. Press and hold the RDS Button
the Information Display will show RDS
PROGRAM TYPE
5
3
until
.
2. Turn the Control Ring on the front panel to
scroll through the list of program types. Once
you have found the program type you would like
Program Search (PTY)
RDS Tuning
A major benefit of RDS is its ability to encode
broadcasts with Program Type (PTY) codes that
indicate the type of material being broadcast.
The following list shows the abbreviations used
to indicate each PTY along with an explanation
of the PTY:
When an FM station is tuned in and it contains
RDS data, the TU 970 will automatically display
the Program Service, which is the station’s call
sign, in the lower display line of the Informa-
tion Display, with some private stations also
offering other information changing every 2 to 5
seconds.
to listen to, press the Select Button
!.
3. Turn to Control Ring again to start the PTY
Search.
When a station is tuned, the search will stop
and the display will show the station’s “Call Let-
ters” or other “Program Service” information.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
NEWS: News
CURRENT AFFAIRS: Current Affairs
INFORMATION: Information
TRAFFIC: Traffic information
SPORT: Sport
RDS Display Options
When an RDS station is tuned, press the RDS
Button on the remote control
To turn off the PTY Search at any time, press the
RDS Button again.
3
or on the
front panel to cycle through the RDS
5
NOTE: Many stations do not transmit a specific
PTY. The display will stay blank when such a sta-
tion is selected and PTY is active.
displays in the following order:
EDUCATION: Education
DRAMA: Drama
• The Program Service or Station Name.
• The current time of the day CLOCK TIME
as transmitted by the station. It will take 3-5
seconds for the time to appear. In the meantime
the word RDS CLOCK TIME will flash in
the display. Note that the accuracy of the time
message is set by the radio station, not by the
TU 970.
Processor Reset
CULTURES: Culture
In the rare case where the unit’s operation or the
displays seem abnormal, the cause may involve
the erratic operation of the system’s memory or
microprocessor.
SCIENCE: Science
VARIED SPEECH: Varied
POP MUSIC: Pop Music
ROCK MUSIC: Rock Music
EASY LISTENING: Easy Listening Music
To correct this problem, first unplug the unit
from the AC wall outlet and wait at least three
minutes. After the pause, reconnect the AC
power cord and check the unit’s operation. If the
system still malfunctions, a system reset may
clear the problem.
• The Program Type (PTY) as shown in the fol-
lowing list in this manual.
LIGHT CLASSICS M: Light Classical
Music
• A Radio Text message, containing special
information from the broadcast station. Note
that this message will scroll across the display to
permit messages longer than the positions in the
display. It will take 3 seconds for the text message
to appear, in the meantime the word RDS
RADIO TEXT will flash in the display. If no
Radio Text is available, the display will show the
Program Service (Station Name).
•
SERIOUS CLASSICAL: Serious
Classical Music
•
•
•
•
OTHER MUSIC: Other Music
WEATHER & METR: Weather
FINANCE: Finance
To reset the TU970, press and hold the Func-
tion/FM Mode Button
the Information Display shows FACTORY
RESET
4
for 5 seconds, until
.
CHILDREN’S PROGS: Children's
Programmes
Note that when the system is reset, all tuner
presets will be lost and must be reentered.
•
•
•
•
•
•
•
•
•
•
•
•
•
SOCIAL AFFAIRS: Social Affairs
RELIGION: Religion
If the system is still operating incorrectly, there
may have been an electronic discharge or severe
AC line interference that has corrupted the
memory or microprocessor.
• Traffic Announcement. When selected,
TRAFFIC ANNOUNCE will blink for 3
seconds. After 3 seconds, the tuner will scan the
FM band searching for available traffic
announcements.
PHONE IN: Phone In
TRAVEL & TOURING: Travel
LEISURE & HOBBY: Leisure
JAZZ MUSIC: Jazz Music
If these steps do not solve the problem, consult
your dealer or an authorized Harman Kardon
service center.
• The station’s frequency. Some RDS stations
may not choose to include some of these addi-
tional features. If the data required for the
selected mode is not being transmitted, the
COUNTRY MUSIC: Country Music
NATIONAL MUSIC: National Music
OLDIES MUSIC: Oldies Music
FOLK MUSIC: Folk Music
Information Display will show a NO PTY NO
,
TEXT or NO TIME message after the indi-
vidual time out or will switch back to the previ-
ous display.
DOCUMENTARY: Documentary
ALARM TEST: Alarm Test
ALARM-ALARM !: Alarm
OPERATION 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting Guide
This unit is designed for trouble-free operation. Most problems users encounter are due to operating errors. If you have a problem, first check this list for a
possible solution. If the problem persists, consult your authorized Harman Kardon Service Center.
If the problem is...
Make sure that the...
No lights appear when System Power button is pressed
Unit is plugged into a live outlet.
Make sure the outlet is active.
No sound is heard
Tune to an active station.
Check for correct amplifier settings.
Check the connections and wires.
Sound distorts, particularly in stereo mode.
Intermittent or continuous buzzing or hissing.
Display says 'No stations Available'
Use a more directional antenna.
Place the unit farther away from these appliances. Install noise filters on the appliances.
Check that antenna is connected.
Ensure that DAB coverage exists in your area.
Display has gone blank or says 'service off air'
This may occur if a broadcaster changes the label of a service or removes a label whilst you
are listening to it. Try to retune to this station, using the Autotune procedure.
12 TROUBLESHOOTING GUIDE
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical Specifications
FM Section
Frequency Range
87.50 MHz to 108.00 MHz (50 kHz steps)
Signal-to-Noise Ratio 65dB (Mono) 60dB (Stereo)
Presets
30
Section
Frequency Range
522 kHz to 1620 kHz (9 kHz steps)
Signal-to-Noise Ratio 35dB
Presets
30
DAB Section
RF Section
Band lll, 174MHz-240MHz
Input: 50 Ohm, nominal
Max signal: -3dBm typ
Sensitivity: -96dBm typ
Adjacent Channel Rejection: 35dB typ
Display
2 line by 16 character DOT Matrix
10
Presets
Audio Output
Stereo, 2.5V P-P
48kHz sample rate 16 bit sample resolution
Optical S/PDIF
IEC60958 Compliant
48kHz sample rate 24 bit sample resolution
General
Power Requirement
Power Consumption
230-240V AC, 50Hz
9W
3W (standby)
Dimension (Max)
Width
Height
Depth
442mm
63mm
299mm
Weight
3.4kg
Depth measurement includes knobs, buttons and terminal connections. Height measurement includes feet and chassis.
All features and specifications are subject to change without notice.
Harman Kardon and Power for the Digital Revolution are registered trademarks of Harman Kardon, Incorporated
TECHNICAL SPECIFICATIONS 13
Download from Www.Somanuals.com. All Manuals Search And Download.
250 Crossways Park Drive, Woodbury, New York 11797
Harman Consumer International:
2, Route de Tours, 72500 Château-du-Loir, France
© 2003 Harman Kardon, Incorporated
Part CQX1A887Z
Download from Www.Somanuals.com. All Manuals Search And Download.
|