MULTI-COLORED, DELTA-WING
KITE
Model 92588
ASSEMBLY INSTRUCTIONS
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE ThIS MANUAL.
Copyright© 2005 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork
contained herein may be reproduced in any shape or form without the express written consent of
Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein. Tools required for
assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
Revised Manual 09l
Download from Www.Somanuals.com. All Manuals Search And Download.
unqualified personnel could result in a
risk of injury.
3. Insert a 25” Tension Pole (2) midway
through a 5-1/2” Brace (3). Then, repeat
this Step for the remaining 25” Tension
Pole and 5-1/2” Brace.
12. The warnings, precautions, and
instructions discussed in this manual
cannot cover all possible conditions and
situations that may occur. The operator
must understand that common sense
and caution are factors, which cannot
be built into this product, but must be
supplied by the operator.
4. Insert one end of the 25” Tension Pole
(2) in the Socket located into the rear/
center of the Kite. Then insert the other
end of the 25” Tension Pole into a Socket
located on the edge toward the rear
end of the Kite. Repeat this step for the
remaining 25” Tension Pole.
ASSEMBLY INSTRUCTIONS
5. Insert the end of each 5-1/2” Brace (3)
into a Socket located toward the rear.
1. Unpack, and lay the Kite (bottom side
up) on a flat, level surface.
6. Tie the String from the String Wheel
(4) onto a String Ring (5). Repeat this
Step for the remaining String Wheel and
String Ring.
2. Insert each end of the 15” Tension Pole
(1) into a Socket located on the edge
toward the front end of the Kite.
15” TENSION POLE (1)
SOCKET
SOCKET
SOCKET
SOCKET
SOCKET
SOCKET
25”
TENSION
POLE
(2)
STRING
RING
(5)
25”
TENSION
POLE
(2)
STRING
RING
(5)
STRING WhEEL
(4)
FIGURE A
5-1/2” BRACE (3)
SOCKET
SKU 92588
For technical questions, please call 1-800-444-3353.
Page 3
Download from Www.Somanuals.com. All Manuals Search And Download.
KITE FLYING TIPS
INSPECTION, MAINTENANCE,
AND CLEANING
1. Wind that is too strong or too light is
difficult to fly in. A flag or windsock is
handy to help you see the wind. Delta
type kites fly well in light to medium
winds (about 6-15 mph). If the Kite sinks
tail first, there might be too much wind. If
the Kite comes down head first or spins,
there might be too much wind.
1. Before each use, inspect the general
condition of the Kite. Check for broken,
cracked, or torn parts, loose or missing
parts, and any condition that may affect
the proper operation of the product. If
a problem occurs, have the problem
corrected before further use.
Do not use damaged equipment.
2. Lay out the Kite and lines completely
before you launch. Lay out the String
Rings (5) so they are balanced on the
right and left side of the Kite. Use at
least 60 feet to 90 feet of string to allow
enough time to react. Make sure the
Strings are even. If one string is shorter,
the Kite will pull on that string and spin in
that direction.
2. When cleaning, use a clean cloth with
a mild detergent. Do not use solvents.
Then, store the Kite in a safe, dry
location out of reach of children.
3. CAUTION! All maintenance, service,
or repairs not listed in this manual are
only to be attempted by a qualified
service technician.
3. To launch, step backwards and pull both
String Wheels (4) to your side. Be sure
to check behind you for obstructions or
hazards before backing up. To control,
pull the left String to make the Kite turn
left. Pull the right String to turn right.
Hold the Strings even to fly straight. Try
not to over-control.
4. The more to the side of the wind the Kite
flies, the less lift and speed it has. When
learning to fly, keep the Kite downwind.
As you get better, explore the more
challenging levels of performance. To
land the Kite, real in one of the String
Wheels (4). Once the Kite has landed,
real in the remaining String Wheel.
Page 4
For technical questions, please call 1-800-444-3353.
SKU 92588
Download from Www.Somanuals.com. All Manuals Search And Download.
|