65939
InstructIons and precautIons
WeldIng
cart
®
distributed exclusively by Harbor Freight tools .
3491 Mission Oaks Blvd., Camarillo, CA 93011
saVe tHese InstructIons. read all
precautIons and InstructIons.
Copyright 2008 by Harbor Freight Tools . All rights reserved. No portion of this document or any artwork contained
herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this document may not be drawn proportionally. Due to continuing improvements, actual product
may differ slightly from the product described herein. Tools required for assembly and service may not be included.
©
®
For technical questions or replacement parts, please call 1-800-444-3353.
unpackIng
Important saFetY
InFormatIon
When unpacking, make sure that the item
is intact and undamaged. If any parts are missing
or broken, please call Harbor Freight Tools at the
number shown on the cover of this document as
soon as possible.
assembly precautions
1.
2.
Assemble only according to these instruc-
tions. Improper assembly can create haz-
ards.
Wear ANSI-approved safety goggles and
heavy-duty work gloves during assembly.
Download from Www.Somanuals.com. All Manuals Search And Download.
4.
Repeat for the other side.
please read tHe FolloWIng
careFullY
a. When attaching the second Tool Tray
Bracket, slide the Tool Tray (3) onto the
metal pegs on the Brackets. These Brackets
hold the Tool Tray in place.
THe MANUFACTUReR AND/OR DISTRIBUTOR HAS
PROvIDeD THe PARTS LIST AND ASSeMBLy DIAGRAM
IN THIS DOCUMeNT AS A ReFeReNCe TOOL ONLy.
NeITHeR THe MANUFACTUReR OR DISTRIBUTOR
MAKeS ANy RePReSeNTATION OR WARRANTy OF ANy
KIND TO THe BUyeR THAT He OR SHe IS qUALIFIeD
TO MAKe ANy RePAIRS TO THe PRODUCT, OR THAT
He OR SHe IS qUALIFIeD TO RePLACe ANy PARTS OF
THe PRODUCT. IN FACT, THe MANUFACTUReR AND/OR
DISTRIBUTOR exPReSSLy STATeS THAT ALL RePAIRS
AND PARTS RePLACeMeNTS SHOULD Be UNDeRTAKeN
By CeRTIFIeD AND LICeNSeD TeCHNICIANS, AND NOT
By THe BUyeR. THe BUyeR ASSUMeS ALL RISK AND
LIABILITy ARISING OUT OF HIS OR HeR RePAIRS TO THe
ORIGINAL PRODUCT OR RePLACeMeNT PARTS THeReTO,
OR ARISING OUT OF HIS OR HeR INSTALLATION OF
b. The Tool Tray should be able to swing freely
as the cart is tilted.
5.
6.
Slide the Wheels (5) onto the Axle ends and
secure in place with washers and split keys.
The Axle (6) is attached to the back-bottom
of the Tank Frame with two U-Bolts and four
washers and nuts onto the Axle Bracket (7).
a. There are two mounting height available:
• Upper mounting position - The Wheels
should be slightly off the ground when the
Cart is standing straight up.
RePLACeMeNT PARTS THeReTO.
parts lIst & assemblY
dIagram
• Lower mounting position - The wheels are
always on the ground supporting the cart.
7.
1.
Go over all screws and nuts making sure
they are tightly fastened and secure.
part
1.
2.
3.
4.
5.
6.
7.
8.
description
Qty.
Handle
1
2
1
1
2
1
2
2
4
2
1
Tool Tray Bracket
Tool Tray
Tank Frame
Wheels (40 PSI)
Axle
maIntenance
Periodicaly check welds for cracks and for
loose parts or damage.
Axle Bracket
U-Bolt
2.
3.
Check wheel tightness and tire pressure.
9.
10.
11.
Screws (2" x 3/16")
Hex Screw
Lubricate wheels if they begin to bind or
squeak.
Baffle Board
4.
Keep dry and free of rust.
storage and saFetY
precautIons
1.
2.
Store tanks away from heat and ignition
sources.
Consult gas supplier on safest way to trans-
port and store gases.
3.
4.
5.
Cart is designed for a maximum of 48" tanks.
Store and use on flat, level, hard surface.
When done welding, check that all gas
valves are closed tightly.
record serial number Here:
note:If product has no serial number, record month and year of purchase instead.
note:Some parts are listed and shown for illustration purposes only, and are not available individually as
replacement parts.
SKU 65939
For technical questions, please call 1-800-444-3353.
Page 3
Download from Www.Somanuals.com. All Manuals Search And Download.
|