BLOW TORCH
WITH PIEZO START
MODEL 91061
ASSEMBLY AND OPERATING INSTRUCTIONS
®
3491 Mission Oaks Blvd., Camarillo, CA 93011
Copyright 2003 by Harbor Freight Tools®. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions, please call 1-800-444-3353.
Download from Www.Somanuals.com. All Manuals Search And Download.
are impaired while taking drugs. If there is any doubt, do not attempt to use this
product.
5.
6.
Use eye and hand protection. Wear ANSI approved safety impact eye goggles
and flame retardant gloves and clothing when using this product. ANSI approved
safety impact eye goggles and flame retardant gloves are available from Harbor
Freight Tools. Always wear heavyduty leather work shoes.
Dress safely. Do not wear loose clothing or jewelry, as they can become caught
in moving parts or come in contact with open flames. Wear a protective hair
covering to prevent long hair from becoming caught in moving parts or coming in
contact with open flames.
7.
Do not overreach. Keep proper footing and balance at all times to prevent
tripping, falling, back injury, etc.
8.
9.
Industrial applications must follow OSHA requirements.
Stay alert. Watch what you are doing at all times. Use common sense. Do not
use this product when you are tired or distracted from the job at hand.
10.
Check for damaged parts. Before using this product, carefully check that it will
operate properly and perform its intended function. Check for damaged parts
and any other conditions that may affect the operation of this product. Replace
or repair damaged or worn parts immediately.
11.
12.
13.
Replacement parts and accessories: When servicing, use only identical re-
placement parts. Only use accessories intended for use with this product. Ap-
proved accessories are available from Harbor Freight Tools.
Maintain this product with care. Keep this product clean and dry for better and
safer performance. For your safety, service and maintenance should be per-
formed regularly by a qualified technician.
Use the right tool for the job. Do not attempt to force a small tool to do the
work of a larger industrial tool. There are certain applications for which this tool
was designed. It will do the job better and more safely at the capacity for which it
was intended. Do not modify this tool, and do not use this tool for a purpose for
which it was not intended.
14.
WARNING! The warnings, precautions, and instructions discussed in this
manual cannot cover all possible conditions and situations that may occur. The
operator must understand that common sense and caution are factors, which
cannot be built into this product, but must be supplied by the operator.
SKU 91061
PAGE 3
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFIC PRODUCT WARNINGS AND PRECAUTIONS
1.
2.
Maintain a safe working environment. Keep the work area well lit. Make sure
there is adequate surrounding work space. Always keep the area free of obstruc-
tions, grease, oil, trash, and other debris. Do not use the Blow Torch in areas
near flammable chemicals, dusts, and vapors. Be aware of wind blown sparks.
Do not use the Blow Torch around or near buildings and structures.
The Blow Torch is for outdoor use only. Use the Blow Torch only in well
ventilated areas. Inhalation of propane fumes may result in carbon monoxide
poisoning, injury and/or death.
3.
4.
Before each use, always check all propane connections and joints to make
sure no leaks are present.
If while using the Blow Torch you notice the odor of propane, immediately
shut off the propane fueling the Torch. Extinguish all open flames, and care-
fully check for leaks by using soapy water. Never use a flame to check for leaks.
If the odor continues, do not use the Torch. Call your local propane supplier for
assistance.
5.
6.
Propane fuel is extremely flammable and under pressure. Do not store
propane fuel in temperatures exceeding 120 degrees fahrenheit. Keep the
propane cylinder upright when using and storing. Never puncture or set fire to an
empty propane cylinder. Contact local solid waste authorities for instructions on
correct disposal or recycling of a propane cylinder.
Do not aim the Blow Torch’s Burner (1) at yourself, others, or animals.
Keep spectators clear of the work area.
7.
8.
Maintain a firm grip with both hands on the Blow Torch while in use.
Never reach across the Blow Torch while in use. Be aware that parts of the
Blow Torch become extremely hot during operation.
9.
Always allow sufficient time for the Blow Torch to completely cool down
before storing. Do not store flammable liquids or materials in the area
surrounding the Blow Torch.
10.
Maintain labels and nameplates on the Blow Torch. These carry important
information. If unreadable or missing, contact Harbor Freight Tools for a replace-
ment.
SKU 91061
PAGE 4
Download from Www.Somanuals.com. All Manuals Search And Download.
11.
12.
Never use gasoline, kerosene, or other highly volatile fluids as a starter as
they can explode.
Dress safely. Do not wear loose clothing such as hanging shirt tails and coats.
Wear a protective hair covering to keep long hair away from heat and flames.
Use ANSI approved safety impact goggles and flame retardant gloves and
clothing to avoid burns.
13.
14.
Never leave the Blow Torch unattended once it is lit.
Keep a fire extinguisher handy. Always keep a commercial fire extinguisher
nearby the Blow Torch in case of accidental fire.
15.
Do not clean the Blow Torch with cleaners that are combustible or cor-
rosive.
16.
17.
Do not paint any part of the Blow Torch.
Make sure the Thumb Wheel (7) is turned to its “OFF” position and the pro-
pane tank (not included) is removed when the Blow Torch is not in use.
18.
19.
Do not use the Blow Torch in the rain.
Never smoke while using the Blow Torch. Make sure all surrounding flames
are extinguished.
20.
Never use a propane tank if it shows signs of: Dents, corrosion, gouges,
bulges, fire damage, leakage, excessive rust, or any other form of visual external
damage.
21.
22.
When work is complete, only set the Blow Torch on a non-flammable
surface like concrete, until the tool is completely cool to the touch.
WARNING! The brass components of this product contain lead, a chemical
known to the State of California to cause birth defects (or other reproductive
harm). (California Health & Safety Code 25249.5, et seq.)
23.
WARNING! This product, when used with propane fuel, produces chemicals
known to the State of California to cause cancer and birth defects (or other repro-
UNPACKING
When unpacking, check to make sure all the parts shown on the Parts List (page 8) are
included. If any parts are missing or broken, please call Harbor Freight Tools at the
number shown on the cover of this manual as soon as possible.
SKU 91061
PAGE 5
Download from Www.Somanuals.com. All Manuals Search And Download.
PRODUCT FEATURES
1.
The Blow Torch is ideal for sweating and thawing pipes, soldering, and
burning weeds in a well controlled safe environment. In addition, the Blow Torch
easily attaches to standard 16.4 Oz. (465 g) (1.02 Lb.) propane tanks.
ASSEMBLY AND OPERATING INSTRUCTIONS
NOTE: For additional references to the parts listed in the following pages, refer to the
Assembly Diagram (page 8).
1.
2.
3.
4.
Make sure the Thumb Wheel (7) is turned completely clockwise to the “OFF”
position. (See Figure A.)
Screw the 16.4 ounce propane bottle (not included) tightly onto the Cylinder
Connector (11). Do not remove the propane bottle until it is completely empty.
The Thumb Wheel (7) regulates the propane gas flow. Release the propane gas
flow by slightly turning the Hand Wheel counterclockwise. (See Figure A.)
Make sure the Burner (1) is pointing in a safe direction and, with the Blow Torch
in a vertical position, push the Piezo Button (16) to activate the electric start. It
may be necessary to push the Piezo Button several times to activate the flame.
(See Figure A.)
5.
6.
Adjust the flame to the desired level by turning the Thumb Wheel (7)
counterclockwise. (See Figure A.)
NOTE: The lit Blow Torch should operate with a blue flame with a small yellow
tip. If necessary, adjust the Thumb Wheel (7) if there is sputtering or popping.
(See Figure A.)
THUMB WHEEL (7)
PIEZO BUTTON (16)
BURNER (1)
CYLINDER CONNECTOR (11)
FIGURE A
SKU 91061
PAGE 6
Download from Www.Somanuals.com. All Manuals Search And Download.
7.
8.
To extinguish the flame, close the Thumb Wheel (7) by turning it completely clock-
wise. (See Figure A.)
Allow sufficient time for the Blow Torch to completely cool. Then, store the Blow
Torch in a safe location and out of reach of children.
INSPECTION, MAINTENANCE, AND CLEANING
1.
Before each use, inspect the general condition of the Blow Torch. Check the
Blow Torch for loose connections and joints, cracked, bent, or broken parts,
damaged propane bottle, and any other condition that may affect the safe opera-
tion of the Blow Torch. If a problem occurs, have the problem corrected before
further use. Do not use damaged equipment.
2.
3.
When cleaning, use only water and a mild detergent. Do not use cleaners that
are combustible or corrosive.
When storing, always allow sufficient time for the Blow Torch to completely cool
down before storing. Do not store flammable liquids or materials in the area
surrounding the Blow Torch. Make sure the Blow Torch’s Tumb Wheel (7) is in its
“OFF” position.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND
ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE
MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF
ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE
PRODUCT, ORTHAT HE OR SHE IS QUALIFIEDTO REPLACE ANY PARTS OFTHE PRODUCT.
IN FACT, THE MANUFACTUER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL
REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND
LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND
LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR
REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF
REPLACEMENT PARTS THERETO.
SKU 91061
PAGE 7
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS LIST
Part #
Description
1
2
3
4
5
6
7
8
9
Burner (020 Piezo)
Gas-Air Mixer (014 x 40)
Nozzle (00.28)
Handle
Body Tap
Nut Key 14 Needle Stop
Thumb Wheel
Nut (M4)
Needle
10
11
12
13
14
15
16
17
18
19
20
21
O-Ring (102)
Cylinder Connector
O-Ring (108)
Gas Intake
Gasket (022 x 2.5)
Screw, and Nut (M4)
Piezo Button
Piezo Ignition
Copper Coated Electrode
Self-Threading Screw (03 x 19)
Ceramic Insulated Electrode
Clamp
ASSEMBLY DIAGRAM
NOTE: Some parts are listed and shown for illustration purposes only, and are not
available individually as replacement parts.
SKU 91061
PAGE 8
Download from Www.Somanuals.com. All Manuals Search And Download.
|