CONCRETE VIBRATOR
®
6.5 HP BRIGGS & STRATTON ENGINE
Model 94344
ASSEMBLY AND OPERATING INSTRUCTIONS
Do to continuing improvements, actual product may differ slightly from the product described herein.
WARNING!
Your Warranty Is Voided If:
A. You do not put engine oil in the Engine’s crankcase prior to its first use.
Before each use, check the oil level. Never run the Engine with low or no engine oil.
Running the Engine with low or no oil will permanently damage the unit.
®
Distributed Exclusively by Harbor Freight Tools .
3491 Mission Oaks Blvd., Camarillo, CA 93011
TO PREVENT SERIOUS INJURY,
READ AND UNDERSTAND ALL WARNINGS
AND INSTRUCTIONS BEFORE USE.
©
®
Copyright 2006 by Harbor Freight Tools . All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions, please call 1-800-444-3353.
Download from Www.Somanuals.com. All Manuals Search And Download.
3.
1.
Keep bystanders, children, and visitors away while operating a power tool.
Distractions can cause you to lose control. Protect others in the work area from
debris such as chips and sparks. Provide barriers or shields as needed.
PERSONAL SAFETY
Stay alert. Watch what you are doing, and use common sense when
operating a power tool. Do not use a power tool while tired or under the
influence of drugs, alcohol, or medication. A moment of inattention while
operating power tools may result in serious personal injury.
2.
3.
4.
5.
6.
Dress properly. Do not wear loose clothing or jewelry. Contain long hair.
Keep your hair, clothing, and gloves away from moving parts. Loose
clothes, jewelry, or long hair can be caught in moving parts.
Avoid accidental starting. Be sure the Gasoline Engine’s Power Switch is
in its “OFF” position before moving the Concrete Vibrator and before
performing any service, maintenance, or cleaning procedures on the unit.
Remove adjusting keys or wrenches before turning the Concrete Vibrator
on. A wrench or a key that is left attached to a rotating part of the machine may
result in personal injury.
Do not overreach. Keep proper footing and balance at all times. Proper
footing and balance enables better control of the power tool in unexpected
situations.
Use safety equipment. Always wear eye protection. Always wear ANSI-
approved safety impact goggles when using this product. Hearing
protection, helmet, and steel toed shoes must also be used.
TOOL USE AND CARE
1.
2.
Do not force the tool. Use the correct tool for your application. The correct
tool will do the job better and safer at the rate for which it is designed.
Do not use the Concrete Vibrator if the Gasoline Engine’s Power Switch
does not turn it on or off. Any tool that cannot be controlled with its power
switch is dangerous and must be replaced.
3.
4.
Store idle tools out of reach of children and other untrained persons. Tools
are dangerous in the hands of untrained users.
Maintain tools with care. Properly maintained tools and equipment are less
likely to bind and are easier to control. Do not use a damaged tool. Tag
damaged tools “Do not use” until repaired.
SKU 94344
For technical questions, please call 1-800-444-3353
PAGE 3
Download from Www.Somanuals.com. All Manuals Search And Download.
5.
6.
Check for misalignment or binding of moving parts, breakage of parts, and
any other condition that may affect the tool’s operation. If damaged, have
the tool serviced before using. Many accidents are caused by poorly
maintained tools.
Use only accessories that are recommended by the manufacturer for your
model. Accessories that may be suitable for one tool may become hazardous
when used on another tool.
SERVICE
1.
2.
Tool service must be performed only by qualified repair personnel. Service
or maintenance performed by unqualified personnel could result in a risk of injury.
When servicing a tool, use only identical replacement parts. Follow
instructions in the “Inspection, Maintenance, And Cleaning” section of this
manual. Use of unauthorized parts or failure to follow maintenance instructions
may create a risk of electric shock or injury.
SPECIFIC SAFETY RULES AND PRECAUTIONS
1.
WARNING! Your Warranty is voided if:
A. You do not put engine oil in the Engine’s crankcase prior to its first use.
Before each use, check the oil level. Never run the Engine with low or no
engine oil. Running the Engine with low or no oil will permanently damage
the unit. Refer to the Engine manufacturer’s product manual (included)
for complete Engine service and maintenance instructions.
2.
3.
This Concrete Vibrator is designed for use only with the Harbor Freight
Tools’ model 94345 Concrete Vibrator Head and Hose. Do not attempt to
use the Concrete Vibrator with any other type of Head and Hose.
Maintain labels and nameplates on the Concrete Vibrator. These carry
important information. If unreadable or missing, contact Harbor Freight Tools for
a replacement.
4.
5.
Industrial applications must follow OSHA guidelines.
Never leave the Concrete Vibrator unattended when its Engine (16) is
running. Turn off the Engine, and wait until it completely stops rotating before
leaving.
SKU 94344
For technical questions, please call 1-800-444-3353
PAGE 4
Download from Www.Somanuals.com. All Manuals Search And Download.
6.
7.
Do not allow children and other unauthorized people to handle or play with
the Concrete Vibrator.
DANGER! This Concrete Vibrator is designed for outdoor use only. Do
not operate the Vibrator in a closed area or in a poorly ventilated area. When
running, the Engine (16) of this Vibrator produces carbon monoxide, a
colorless, odorless, toxic fume that, when inhaled, can cause serious personal
injury or death. Whenever possible, use a carbon monoxide detector (not
included) to detect excessive carbon monoxide fumes in the work area and in the
surrounding area.
8.
Do not force the Concrete Vibrator. This machine will do the work better and
safer at the speed and capacity for which it was designed.
9.
Never stand on the Concrete Vibrator. Standing on the Vibrator could tip the
tool, possibly causing personal injury and/or property damage.
10.
Use the right tool for the job. Do not attempt to force small tools and
equipment to do the work of larger industrial tools and equipment. There are
certain applications for which this tool was designed. It will do the job better and
more safely at the rate for which it was intended. Do not modify this tool, and do
not use this tool for a purpose for which it was not intended.
11.
12.
Store idle tools and equipment. When not in use, the Concrete Vibrator must
be stored in a dry location to inhibit rust. Always lock up the tool and keep out of
reach of children and other unauthorized people.
Do not operate this tool if under the influence of alcohol or drugs. Read
warning labels if taking prescription medicine to determine if your judgement or
reflexes are impaired while taking drugs. If there is any doubt, do not operate
the tool.
13.
14.
WARNING! People with pacemakers should consult their physician(s)
before using this product. Operation of electrical equipment in close proximity to
a heart pacemaker could cause interference to or failure of the pacemaker.
WARNING! The warnings and precautions discussed in this manual cannot
cover all possible conditions and situations that may occur. It must be under
stood by the operator that common sense and caution are factors which cannot
be built into this product, but must be supplied by the operator.
FIRE AND EXPLOSION PRECAUTIONS
1.
Gasoline fuel and fumes are flammable, and potentially explosive. Use
proper fuel storage and handling procedures. Always have multiple ABC class
fire extinguishers nearby.
SKU 94344
For technical questions, please call 1-800-444-3353
PAGE 5
Download from Www.Somanuals.com. All Manuals Search And Download.
2.
3.
Keep the Concrete Vibrator and surrounding areas clean at all times.
When spills of fuel or oil occur, they must be cleaned up immediately.
Dispose of fluids and cleaning materials as per any local, state, or federal codes
and regulations. Store oil rags in a covered metal container.
4.
5.
Never store fuel or other flammable materials near the Concrete Vibrator.
Do not smoke, or allow sparks, flames, or other sources of ignition around
the Concrete Vibrator.
6.
7.
8.
Keep grounded conductive objects, such as tools, away from exposed, live
electrical parts and connections to avoid sparking or arcing. These events
could ignite fumes or vapors.
Do not refill the Fuel Tank while the Engine is running or while the Engine is
still hot. Do not operate the Concrete Vibrator with known leaks in the fuel
system.
Use only Engine manufacturer recommended fuel and oil.
MECHANICAL PRECAUTIONS
1.
Prior to performing service, maintenance, or cleaning procedures, always
make sure the Gasoline Engine’s Power Switch is in its “OFF” position.
Allow the Engine to completely cool. Then, remove the spark plug from the
Engine.
2.
3.
Do not alter or adjust any part of the Concrete Vibrator or Engine that is
assembled and supplied by the manufacturer.
Always follow and complete scheduled Concrete Vibrator and Engine
maintenance.
CHEMICAL PRECAUTIONS
1.
2.
Avoid contact with hot fuel, oil, exhaust fumes, and solid surfaces.
Avoid body contact with fuels, oils, and lubricants used in the Concrete
Vibrator and Engine. If swallowed, seek medical treatment immediately. Do not
induce vomiting if fuel is swallowed. For skin contact, immediately wash with
soap and water. For eye contact, immediately flush eyes with clean water.
SKU 94344
For technical questions, please call 1-800-444-3353
PAGE 6
Download from Www.Somanuals.com. All Manuals Search And Download.
NOISE PRECAUTIONS
1.
Prolonged exposure to noise levels above 85 dBA is hazardous to hearing.
Always wear hearing protection when operating or working around the Concrete
Vibrator when it is running.
VIBRATION HAzARD
This tool vibrates during use. Repeated or long-term exposure to vibration may
cause temporary or permanent physical injury, particularly to the hands, arms
and shoulders. To reduce the risk of vibration-related injury:
1.
2.
Anyone using vibrating tools regularly or for an extended period should first
be examined by a doctor and then have regular medical check-ups to ensure
medical problems are not being caused or worsened from use. Pregnant women
or people who have impaired blood circulation to the hand, past hand injuries,
nervous system disorders, diabetes, or Raynaud’s Disease should not use this
tool. If you feel any medical or physical symptoms related to vibration (such as
tingling, numbness, and white or blue fingers), seek medical advice as soon as
possible.
Do not smoke during use. Nicotine reduces the blood supply to the hands and
fingers, increasing the risk of vibration-related injury.
3.
4.
Wear suitable gloves to reduce the vibration effects on the user.
Use tools with the lowest vibration when there is a choice between different
processes.
5.
6.
Include vibration-free periods each day of work.
Grip tool as lightly as possible (while still keeping safe control of it). Let the tool
do the work.
7.
To reduce vibration, maintain the tool as explained in this manual. If any
abnormal vibration occurs, stop use immediately.
UNPACKING
When unpacking, check to make sure all the parts shown on the Parts List on page 13
are included. If any parts are missing or broken, please call Harbor Freight Tools at the
number shown on the cover of this manual as soon as possible.
REV 07j
SKU 94344
For technical questions, please call 1-800-444-3353
PAGE 7
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY INSTRUCTIONS
To Attach The Head And Flexible Hose To The Concrete Vibrator:
1.
NOTE: This Concrete Vibrator is designed for use only with the model 94345
Concrete Vibrator Head and Hose (available from Harbor Freight Tools). Do
not attempt to use the Concrete Vibrator with any other type of Head and Hose.
2.
3.
Turn the Lock Lever (13) up all the way. (See Figure A.)
Insert the Cylindrical Plug and Cylindrical Connector of the Head and Hose into
the Coupler (2) of the Concrete Vibrator. Make sure the grooves on the
Cylindrical Plug align with the grooves inside the Coupler. Also, make sure to
align the notches in the Cylindrical Connector with the Lock Lever (13).
(See Figure A.)
LOCK LEVER (13)
CYLINDRICAL
PLUG
CYLINDRICAL
CONNECTOR
SKU 94344
For technical questions, please call 1-800-444-3353
PAGE 8
Download from Www.Somanuals.com. All Manuals Search And Download.
4.
Turn the Lock Lever (13) downward until it locks the Cylindrical Connector firmly
in place. (See Figure B.)
CYLINDRICAL
CONNECTOR
LOCK LEVER
(13)
FIGURE B
PRE-OPERATING INSTRUCTIONS
WARNING! Always make sure the Engine’s Power Switch is in its “OFF”
position prior to performing any service, maintenance, or cleaning of the
Concrete Vibrator.
To Add Engine Oil:
1.
IMPORTANT! Prior to first using the Concrete Vibrator, the Engine MUST be
filled with a high quality 30W grade engine oil.
(See Engine manufacturer’s manual for complete instructions.)
2.
3.
To do so, unscrew and remove the Engine Oil Dipstick. Pour approximately 3/4
quart of engine oil into the Dipstick Hole. Do not overfill.
Clean the Oil Dipstick. Then screw the Dipstick fully back into the Dipstick Hole.
Unscrew and remove the Oil Dipstick again, and observe the level of engine
oil on the Dipstick. The oil level should appear between the “MINIMUM” and
“MAXIMUM” indicator marks on the Oil Dipstick.
4.
5.
If necessary, continue adding engine oil, while rechecking the Oil Dipstick, until
the oil level reaches the “MAXIMUM” indicator on the Oil Dipstick.
Do not exceed the “MAXIMUM” indicator mark on the Oil Dipstick.
When finished adding engine oil, carefully screw the Oil Dipstick back into the
Dipstick Hole.
SKU 94344
For technical questions, please call 1-800-444-3353
PAGE 9
Download from Www.Somanuals.com. All Manuals Search And Download.
To Fill The Fuel Tank:
1.
Prior to first using the Concrete Vibrator, the Engine’s Fuel Tank MUST be filled
with unleaded gasoline.
(See Engine manufacturer’s manual for complete instructions.)
2.
To do so, remove the Fuel Tank Cap and fill the Fuel Tank with unleaded gasoline.
Then, replace the Fuel Tank Cap. Thereafter, check the Fuel Tank for the amount
of unleaded gasoline. When necessary, refill the Fuel Tank.
(See Engine manufacturer’s manual for complete instructions.)
OPERATING INSTRUCTIONS
1.
2.
With assistance, carry the Concrete Vibrator by its Frame (15), with the Vibrator
Head and Flexible Hose, to where the cement is being poured. Place the unit on
a flat, level, ground surface away from water and the concrete.
After pouring the concrete, grip the Vibrator Head and Flexible Hose by its
Casing. Then, start the Engine (16) of the Concrete Vibrator.
(See Engine manufacturer’s manual for complete instructions.)
3.
4.
5.
6.
The Vibrator Head should begin to move. If it does not move, tap it until the
vibration begins. (See Figure C.)
Insert the Vibrator Head and Flexible Hose assembly into the concrete.
(See Figure C.)
Move the Vibrator Head up and down in the concrete to remove air bubbles.
(See Figure C.)
IMPORTANT: Never allow concrete to enter the Vibrator Head assembly, as this
could damage the bearings inside the Head. (See Figure C.)
VIBRATOR HEAD
CASING
FLEXIBLE HOSE
FIGURE C
SKU 94344
For technical questions, please call 1-800-444-3353
PAGE 10
Download from Www.Somanuals.com. All Manuals Search And Download.
7.
8.
When finished using the Concrete Vibrator, remove the Vibrator Head assembly
from the concrete. Turn off the Engine (16) of the unit. Disconnect the Vibrator
Head and Flexible Hose from the Concrete Vibrator, and use a garden hose to
clean the Vibrator Head and Flexible Hose of all concrete and debris.
(See Figure C.)
Allow the Engine (16) of the Concrete Vibrator to completely cool. Then store the
Concrete Vibrator, Vibrator Head, and Flexible Hose in a clean, dry, safe location
out of reach of children and other unauthorized people. (See Figure C.)
TROUBLESHOOTING - CONCRETE VIBRATOR
TROUBLESHOOTING - VIBRATOR HEAD AND FLEXIBLE HOSE
Problem
Possible Cause
Possible Solution
Engine runs, but Vibrator Head will not 1. Excessive dried concrete or debris
1. Tap Vibrator Head until it begins to vibrate.
vibrate.
on Vibrator Head.
2. Excessive kinks in Flexible Hose.
2. Straighten Flexible Hose to remove kinks.
3. Cylindrical Plug and/or Cylindrical
Connector not properly connected to
Coupler on Concrete Vibrator unit.
3. Shut down Engine, and properly reconnect
Cylindrical Plug and Cylindrical Connector
to Coupler on Concrete Vibrator.
4. Bearings within Vibrator Head dam-
aged.
4. Take the Vibrator Head and Flexible Hose
to a qualified service technician for repair or
replacement.
SKU 94344
For technical questions, please call 1-800-444-3353
PAGE 11
Download from Www.Somanuals.com. All Manuals Search And Download.
INSPECTION, MAINTENANCE, AND CLEANING
1.
2.
DANGER! Make sure the Engine’s Power Switch of the Concrete Vibrator is
in its “OFF” position prior to performing any inspection, maintenance, or cleaning
of the machine.
Before each use, inspect the general condition of the Concrete Vibrator. Check
for loose screws, misalignment or binding of moving parts, cracked or broken
parts, damaged electrical wiring, and any other condition that may affect the safe
operation of the Concrete Vibrator. If abnormal noise occurs, have the problem
corrected before further use.
Do not use damaged equipment.
3.
Before each use, check the Engine oil level. If necessary, fill the crankcase of
the Engine with the proper amount and type of engine oil. Refer to the Engine
manufacturer’s manual for all inspection, maintenance, and cleaning
instructions.
4.
5.
NOTE: Always dispose of old engine oil in accordance with local, state, and
federal regulations.
To clean, use a clean cloth with a mild detergent. Do not introduce water into the
carburetor or other open orifices of the Engine. Also, use compressed air to blow
off excessive dirt and debris.
6.
CAUTION! All maintenance, service, or repairs not mentioned in this
manual must only be performed by a qualified service technician.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY
DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR
DISTRIBUTOR MAKES ANY REPRESENTATION ORWARRANTY OF ANY KINDTOTHE BUYERTHAT HE
OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER
AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS
SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER.
THE BUYER ASSUMES ALL RISKS AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE
ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER
INSTALLATION OF REPLACEMENT PARTS THERETO.
SKU 94344
For technical questions, please call 1-800-444-3353
PAGE 12
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS LIST AND ASSEMBLY DIAGRAM
Part
1
Description
Shaft Circlip
Qty.
1
Part
8
Description
Flexible Washer
Washer
Qty.
4
Part
15
16
17
18
19
20
21
Description
Frame
Qty.
1
2
Coupler
Pin
1
9
4
Engine (B & S 6.5 HP)
Bolt
1
3
1
10
11
12
13
14
Bolt
4
4
4
Clutch Block
Shaft Connector
Key
1
Elastic Washer
Washer
4
Spring
4
5
1
4
Rubber Foot
Split Pin
4
6
1
Lock Lever
Lock Screw
1
4
7
Nut
4
1
Connecting Rod
4
NOTE:
Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts.
SKU 94344
For technical questions, please call 1-800-444-3353
PAGE 13
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED 90 DAY WARRANTY
Harbor Freight Tools Co. makes every effort to assure that its products meet high
quality and durability standards, and warrants to the original purchaser that this product
is free from defects in materials and workmanship for the period of 90 days from the date
of purchase. This warranty does not apply to damage due directly or indirectly, to misuse,
abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity,
improper installation, normal wear and tear, or to lack of maintenance.We shall in no event
be liable for death, injuries to persons or property, or for incidental, contingent, special
or consequential damages arising from the use of our product. Some states do not allow
the exclusion or limitation of incidental or consequential damages, so the above limitation
of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF
MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us with
transportation charges prepaid.Proof of purchase date and an explanation of the complaint
must accompany the merchandise. If our inspection verifies the defect, we will either
repair or replace the product at our election or we may elect to refund the purchase price
if we cannot readily and quickly provide you with a replacement. We will return repaired
products at our expense, but if we determine there is no defect, or that the defect resulted
from causes not within the scope of our warranty, then you must bear the cost of returning
the product.
This warranty gives you specific legal rights and you may also have other rights
which vary from state to state.
3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353
SKU 94344
For technical questions, please call 1-800-444-3353
PAGE 14
Download from Www.Somanuals.com. All Manuals Search And Download.
|