dIgItal
contact
66400
tacHometer
InstructIons and precautIons
®
distributed exclusively by Harbor Freight tools .
3491 Mission Oaks Blvd., Camarillo, CA 93011
saVe tHese InstructIons. read all
precautIons and InstructIons.
©
®
Copyright 2008 by Harbor Freight Tools . All rights reserved. No portion of this document or any artwork contained
herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this document may not be drawn proportionally. Due to continuing improvements, actual product
may differ slightly from the product described herein. Tools required for assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
specIFIcatIons
Display
LCD 5 Digits
RPM Range
Accuracy
2.5 - 19,999 RPM
± 0.05 plus 1 RPM
(4) 1.5 VDC (AA) Batteries
(Not Supplied)
Power Source
Operating
Environment
32° - 104° F; 0 - 50°
< 85% Humidity
unpackIng
When unpacking, check to make sure that
the item is intact and undamaged. If any parts are
missing or broken, please call Harbor Freight Tools
at the number shown on the cover of this document
as soon as possible.
Important saFetY
InFormatIon
1.
2.
When in use, this tool is in contact with rotat-
ing parts.
Your tool includes:
• Digital Touch Tachometer
• (3) Adapters
Do not touch rotating parts. Do not wear
loose clothing when working with rotating
parts. Contain hair, jewelry and any item that
may become entangled in rotating part.
3.
This product is not a toy. Do not allow chil-
dren to play with or near this item.
Revised Manual 09c
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing adapters
set up and operatIon
Battery Installation
Installing Adapter
Battery Compartment
1.
2.
Before use, the correct Adapter must be
installed.
- Cone RPM Adapter
- Funnel RPM Adapter
- Wheel Surface Speed Adapter
1.
2.
3.
4.
Before use, install (4) 1.5 VDC “AA” batteries
(not supplied).
To install batteries, remove Screw (18) from
Battery Cover (17).
The Adapters are friction fit. Slide the Adapter
on or off as needed.
Remove Battery Cover (17) from Back Cover
(12).
operatIon
Install 4 “AA” batteries in battery compart-
ment. Be sure to match polarity of batteries
to markings inside battery case.
rpm measurement
1.
Attach the Cone Adapter (24) to the Rotating
Axle (27) as described above.
5.
6.
7.
8.
Replace Battery Cover (17). Reinstall Screw
(18). Do not overtighten.
2.
3.
Set Function Switch to CONTACT.
Whenever the Low Battery Indicator appears,
replace the batteries.
Press the tip of the cone to the center of the
rotating shaft to read shaft RPM. Keep the
Tachometer’s Rotating Axle in line with the
center of the shaft at all times.
Do not short the battery terminals together
when replacing batteries.
Do not dispose of old batteries in fire.
Always dispose of batteries in accordance
with guidelines provided by local authority.
note: This tool may be used with AC power.
Plug adapter (not included) into adapter
Socket and into a 120 VAC outlet.
4.
5.
Press and hold the TEST button.
When the cone gains steady rotational
speed, read the RPM on the LCD screen.
linear speed measurement
1.
Attach the Surface Adapter Wheel (20) to the
Rotating Axle (27) as described above. With
the Rotating Axle parallel with the rotating
shaft, touch the side of the shaft with the side
of Surface Adapter Wheel (20). Maintain light
and steady pressure against the shaft.
2.
3.
Set the Function Switch to FT/MIN (Feet per
minute) or M/MIN (Meter per minute).
Press and hold the TEST button.
REV 09c
SKU 66400
For technical questions, please call 1-800-444-3353.
Page 3
Download from Www.Somanuals.com. All Manuals Search And Download.
4.
When the cone gains steady rotational
speed, read the RPM on the LCD screen.
parts lIst
part
1
description
Qty.
Front Cover
1
1
memory Function
2
Function Switch
Memory Button
LCD Window
End Cap
1.
2.
After each test, you can review most recent
saved measurements.
3
1
Press and release MEMORY button to cycle
through most recent MIN and MAX readings.
4
1
5
1
6
LCD
1
record serial number Here:
7
Conductive Rubber gasket
LCD Holder
1
note:If product has no serial number, record
8
1
month and year of purchase instead.
9
Spring
1
note:Some parts are listed and shown for illustra-
tion purposes only, and are not available
individually as replacement parts.
10
11
12
13
14
15
16
Printed Circuit Board
PCB Cover
1
1
Back Cover
1
please read tHe FolloWIng
careFullY
Battery Connector
Screw st 2.9 x 12
TEST Button
1 set
5
THE MANUFACTURER AND/OR DISTRIBUTOR HAS
PROVIDED THE PARTS LIST AND ASSEMBLY DIAgRAM
IN THIS DOCUMENT AS A REFERENCE TOOL ONLY.
NEITHER THE MANUFACTURER OR DISTRIBUTOR
MAKES ANY REPRESENTATION OR WARRANTY OF ANY
KIND TO THE BUYER THAT HE OR SHE IS qUALIFIED
TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT
HE OR SHE IS qUALIFIED TO REPLACE ANY PARTS OF
THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR
DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS
AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN
BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT
BY THE BUYER. THE BUYER ASSUMES ALL RISK AND
LIABILITY ARISINg OUT OF HIS OR HER REPAIRS TO THE
ORIgINAL PRODUCT OR REPLACEMENT PARTS THERETO,
OR ARISINg OUT OF HIS OR HER INSTALLATION OF
REPLACEMENT PARTS THERETO.
1
Battery 1.5 VDC “AA”
(not included)
4
17
18
19
Battery Cover
1
1
1
Screw m2.5 x 6
Base of
Surface Speed Adapter Wheel
20
21
Surface Speed Adapter Wheel
1
1
Cover of
Surface Speed Adapter Wheel
22
23
24
Screw st 2.5 x 8
3
1
1
Concave Rotating Adapter
Head of
Conical Rotating Adapter
25
Base of
1
Conical Rotating Adapter
26
27
28
29
30
31
32
Spring Ball Bearing m1.5 x 6
Rotating Axle
1 set
1
1
1
1
1
5
Axle Tree (607)
Pulse Counter Wheel
gasket
Screw m2 x 6.5
Screw st 2.3 x 8
SKU 66400
For technical questions, please call 1-800-444-3353.
Page 4
Download from Www.Somanuals.com. All Manuals Search And Download.
assemBlY dIagram
SKU 66400
For technical questions, please call 1-800-444-3353.
Page 5
Download from Www.Somanuals.com. All Manuals Search And Download.
lImIted 90 daY WarrantY
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and dura-
bility standards, and warrants to the original purchaser that this product is free from defects in materials
and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to
damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside
our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance. We
shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special
or consequential damages arising from the use of our product. Some states do not allow the exclusion or
limitation of incidental or consequential damages, so the above limitation of exclusion may not apply to
you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IM-
PLIED, INCLUDINg THE WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us with transportation
charges prepaid. Proof of purchase date and an explanation of the complaint must accompany the mer-
chandise. If our inspection verifies the defect, we will either repair or replace the product at our election
or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replace-
ment. We will return repaired products at our expense, but if we determine there is no defect, or that the
defect resulted from causes not within the scope of our warranty, then you must bear the cost of returning
the product.
This warranty gives you specific legal rights and you may also have other rights which vary from
state to state.
3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353
SKU 66400
For technical questions, please call 1-800-444-3353.
Page 6
Download from Www.Somanuals.com. All Manuals Search And Download.
|