Harbor Freight Tools Automobile Accessories 91729 User Manual |
3 SHELF
WOODEN RACK
91729
ASSEMBLY INSTRUCTIONS
®
3491 Mission Oaks Blvd., Camarillo, CA 93011
®.
Copyright © 2004 by Harbor Freight Tools
All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions and replacement parts, please call 1-800-444-3353
Download from Www.Somanuals.com. All Manuals Search And Download.
9. Replacement parts. When servicing, use only identical replacement parts. Use
of any other parts will void the warranty.
10. Warning: Locate the 3 Shelf Wooden Rack in a spot that is flat without an
uneven surface.
11. Always distribute objects on Shelves evenly. Uneven weight distribution
could cause toppling. Do not allow children to climb on the Shelves or play
with the wooden rack.
Warning: The warnings, cautions, and instructions discussed in this instruc-
tion manual cannot cover all possible conditions and situations that may
occur. It must be understood by the operator that common sense and caution
are factors which cannot be built into this product, but must be supplied by the
operator.
Unpacking
When unpacking, check to make sure the following parts are included. If any parts
are missing or broken, please call Harbor Freight Tools at the number on the cover of
this manual.
Assembly Instructions
1. Assemble all parts on a smooth surface to avoid scratching. Hardware is
provided.
2. Set the Side Walls (1) on the floor. Each Shelf (2) is to have the Back Stop
(3) attached. If not preassembled, attach with Wood Screws (4) in the
predrilled holes. (See Figure A).
Back Stops (3)
Wood Screws
(4)
Shelf (2)
Figure A
Side Wall (1)
Shelf (2)
Figure B
3. Attach each Side Wall (1) to the Three Shelves (2) with the Wood Screws
(4) in the predrilled holes. Do not tighten Screws (4) completely until all the
Shelves (2) are assembled. Check that all is level and then tighten all
Screws (4). (See Figure B).
4.
A varnish or stain may be applied after assembly. Avoid too much moisture
on the shelving unless you use a waterproof bar finish. Avoid tipping
assembled Shelves.
SKU 91729 For technical questions, please call 1-800-444-3353. Page 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts List
Part #
Description
Qty.
Side Wall
Shelf
Back Stop
Wood Screw
1
2
3
4
2
5
5
24
Assembly Drawing
Part 2
Part 3
Part 4
Part 4
Part 4
Part 4
Part 4
Part 4
Part 4
Part 4
Part 1
Part 1
Part 2
Part 3
Part 4
Part 4
Part 4
Part 4
Part 4
Part 4
Part 4
Part 4
Part 2
Part 3
Part 4
Part 4
Part 4
Part 4
Part 4
Part 4
Part 4
Part 4
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS
MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTOR
MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS
QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO
REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR
EXPRESSLY STATES THat ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN
BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES
ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR
REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACE-
MENT PARTS THERETO.
NOTE: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts.
SKU 91729 For technical questions, please call 1-800-444-3353. Page 4
Download from Www.Somanuals.com. All Manuals Search And Download.
|