Environment-friendly double-driver
automatic washing machine
User's manual
This manual is for
XQSB60-JN
Please read this manual
carefully before using.
0030806318B
Retain it for future reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
Names of the parts
Water inlet valve
Top lid handle
Top lid component
Water absorption
cushion
Attachment block
(2 pieces)
Inner cover component
Detergent box
Lint filter(2 pieces)
Control panel
Outer tub cover
Softener inlet
Balance ring
Liquid bleacher
inlet
Inner tub
Pulsator
Front control board
Handle(2 pieces)
Front door
Cabinet
Fixed leg (3 pieces)
Back cover
Cabinet base
Drain hose
Adjustable leg
Decorative board
Adjustable leg film
Meaning and description of the symbols
Contents marked with that symbol are related to the
safety of the product and the personal safety of the
users. Please operate in strict conformity to the contents,
otherwise it may cause damage of the machine or
injure the personal safety of the user.
Warning sign
Contents marked with that symbol are actions forbidden
to perform. Performing of those actions may result
in damage of the machine or injure the personal
safety of the user.
Forbidden sign
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety precautions
In common usage of the washing machine, the power
Please insert the power cord into special receptacle
with rated voltage. Be sure to use single-phase three
pins receptacle. Ensure the earthing prong of the
power receptacle is earthed reliably. Use leakage
protector if possible.
plug shall be ready to be pulled or plugged with hand.
Be sure to pull the plug off and close the water faucet
when occurring power failure, delivering the machine,
setting the machine idle or cleaning the machine. Do
not plug or pull the power plug with wet hand.
Do not bend, stretch, twist, bind the power cord by force, or reform it.
Do not pressor clamp it with heavy items. If the power cord and power
plug are bad, or the receptacle is loose, be sure to have it replaced by
the technicians ofour special shopor our agent, or the after-salesservice
department to avoidany risk. Keep the prong of the power plugclean. If
dust is foundon the powerplug, please wipeit off withdry cloth.
In case the washing machine is installed on ground
with carpet, be careful not to block the ventilation hole
with carpet.
Do not use water with temperature higher than 50
The ventilation
holes at the bottom
Do not put the machine at damp place like the
bathroom. Never wash it with water. Do not
put wet laundries on the control panel coating.
Do not wash water-proof laundry like the raincoat,
bike covers etc. To avoid abcommon vibrations in
spinning and damages to the laundries.
Do not let the machine share one receptacle with other
electric appliances. If the power plug is damaged, or
the plugging into the receptacle is loose, do not use
the plug any more.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety precautions
Do not put hand into the rotating tub. It is dangerous
even if the rotation speed is slow. Take special care of
the children. Keep children away from the washing
machine to avoid them climbing on.
Do not decompose, repair or alter the machine by
yourself.
Do not put any hot or heavy items (such as the
kettle with hot water) on the washing machine.
Do not wash laundry with volatile materials
(such as thinner, petrol etc.).
Benzene
Keep the machine away from direct sunlight and
heat source like the heater.
The handicapped or Childrenwithout care shall not
use the machine.
Please keep the lint filter in good
condition, and install it to proper
To protect your laundries and washing machine,
please take out all of the coins, buttons, sand, hairpin
and other foreign materials before washing.
Install
position during washing. If
the lint filter is lost or damaged,
Dismantle
please contact the local after-sales
service department of our company.
Please check if the water faucet is open, and if the connection of the water inlet pipe is proper before washing.
Please put down the drain hose before washing.
It is suggested to use foamless washing powder.
Please don't use the washer in the environment below 0
if the washer has been stored below 0
please
be sure to ensure the washer is placed under the room temperature for 24 hours and then use otherwise the
washing effects may be lowered or the washer may be damaged.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and adjustment
Please install and adjust the machine according to the requirement of the manual.
It is very important to your security and correct operating the machine.
Install the inner cover component
1.Open the top lid of the washing machine.
Outer tub cover
2.Put the inner cover component on the outer tub cover,
aiming the inner cover shaft to the installation hole of the
corresponding outer tub cover shaft groove.
Outer tub cover
shaft groove
Inner cover shaft
Inner cover
3.Firstly insert the inner cover shaft of one side into the
corresponding outer tub cover shaft groove, then push
the another inner cover shaft into the corresponding
outer tub cover shaft groove. Please install to designated
position to guarantee there are no dropping or abcommon
sound in opening and closing of the inner cover, and the
operation shall be smooth. Do not dismount the inner
cover component after washing.
Right hand
Left hand
Install the bottom plate
After opening the package, please lean the washing
machine gently down on soft items (like towel cloth,
blanket, etc.). Install the bottom plate to the bottom
of the machine with four screws by a cross screwdriver,
then lift the machine up gently.
Front
Back
See to the figure:
Bottom plate
Screw
Soft object
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjust the Installation position
The washing machineaway from wallshould be overrun20mm. The largestallowable slope ofthe
shank base ofthe machine is1 .The slanting orrough ground willresult in unstablerunning or
stoppage of themachine. Please adjustit with following methods:
Confirm it's horizontal:
Hang the lead line to check if it is
horizontal.
Adjust the adjustableleg:
1 .Totwist the adjustableleg, please firstlift up the
side of theleg slightly,loosen the adjustablenut,
the adjustable nut
and twist theleg.
Fasten
Loosen
High
the adjustable feet
2 . Afteradjustment, fasten thenut.
Low
Usage the drain hose
The drainage shall be smooth with the drain hose.
1.The height of the drain hose shall be less than 10cm,
or the drainage will not be smooth, and cost such long
4.If extra drain hose is needed, please make separate
purchase. The inner diameter of the extra hose shall
not less than 30mm, and the length shall not exceed
1.5m.
time that the machine may stop at mid way.
2.Do not step on or press the drain hose.
>
30mm
<10cm
<1.5m
3. If the drain hose is too long, cut it at mid point. To make
smooth drainage, cut the front end of the hose slantingly.
5.If the extra hose is too long,cut it either at
A or at B point.
B
A
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Install the water inlet hose
1. Attach the water inlet hoses to the water faucet. Using pliers, tighten
the coupling. ( As figure 1)
NOTE: Do not over tighten. Damage to the valves can result.
2. Connect the other ends to the water inlet valve .
( As figure 2)
Jointer of the water inlet hose
Figure 1
Jointer of the
water inlet valve
Figure 2
Water absorption cushion
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Check the connection between the jointer of
the water inlet hose and the water tap
1.Swing the hose gently to confirm if it is fastened stable.
2.After installation, open the faucet to check if it leaks.
3.Do not bend the hose with overstrain.
4.Before each usage please check if the connection
between the jointer of the water inlet hose and the
water faucet, and the installation of the water inlet
hose are firm, so as to prevent dropping from
improper installation position.
Take down the water inlet hose
1.After using, Closethe water tap.
2. Pull off the water inlethose from thewater tap and washer
7
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Preparation before washing
Preparation before washing
1.Connect the water inlet hose.
2.Confirm that the washing machine is earthed
reliably . Then insert the power plug into the
receptacle. Do not connect the earth terminal
to the gas pipe and tap water pipe.
4.The ground inclination or unevenness may cause
the washer operating not steadily or cause noise,
please set level the washer.
Pay attention to followings before washing the laundries
Confirm if there's
special requirement Take out the coins , and zippers.
for the laundries. sand, hairpins etc.
Clear the pocket.
Fasten the buttons The quantity of the When the pulsator is
laundries shall not running ,the buttons of
exceed the rated
value. The big
the laundries may cause
noise. For the sake of
laundries like the discretion ,please put
jeans shall be put
in loosely.
the laundries with
buttons into other
laundries.
a. Check if the laundries are applicable for washing with machine.
B. Divide the laundries that are not colorfast from other laundries.
c. Put those laundries difficult to absorb water into water with hand.
d. For those laundries with heavy soil, please first remove the dirt like mud or dust. For the parts with heavy soil,
please apply detergent in advance, which can make it easier to remove the soil.
e. For those laundries that may get lint ball and those with long fur, turn it over before putting in.
f. Do not put those laundries polluted by chemicals directly into the washing machine.
2 The musts in washing
The capacity of washing of the machine refer to the largest weight of the standard laundries under dry
condition that can be washed in one time.
The thickness ,size , type of the cloth will influence the actual washing capacity. It is suitable to put in
reasonable amount of laundries and the laundries can be turned round in washing for one time washing.
It is suggested to use foamless washing powder.
Do not select high water level for small quantity of laundries ,so as to avoid splashing of water.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Usage of the detergent
How to use the softner
The usage and dose of the softener as per the specifications of
softener.
Before washing put the softener into the filling entrance(can be found on
the balancing ring by rotating the inner tub, as illustrated in the left
drawing, please refer to P1 graphics) The softener will put into the
washer when rinsing.
When choosing the No washing powder
program the usage of softener or bleacher
is same as using detergent.
After the softener is put in, please don't place for a long time otherwise
softener may solidify and cause flowing not smooth.
When the washer in spin process please don't push "START/ PAUSE "
button for fear that the softener is put in earlier, which affect the effects.
Please do not use softener in the following cases
Selected rinsing times greater than two
Softener
inlet
SOFTNER
Choosing rinse/spin two-in-one program.
How to use the bleacher
Fill water to decided level .Dilute the bleacher with container.
Pour it slowly into the washing tub.
Avoid using bleacher on laundries with color or pattern as
they are prone to lose color.
When " No washing powder " button not
selected for using washing powder program
please determine the consumption of washing
powder as per the operating instruction of
washing powder, clothes load and dirtiness.
When selecting "No washing powder" function
if add a small quantity of detergent the clothes
will be washed cleaner.
The bleacher shall not touch the laundries directly.
Refer to the user's manual for the usage and quantity of the
bleacher.
For powder bleacher, please dissolve it before use.
Washing powder inlet
How to use the washing powder
When selecting reserve wash or fuzzy program, put the detergent into
filling entrance.
Directly dissolved in the machine (not applicable for fuzzy program and
reserve wash)
1.Fill small quantity of water select the smallest water level
.
2.Add the wash powder. Run for 30 seconds to dissolve it completely.
3.Put in the laundry. Select suitable water level.
Detergent box
The instant dissolving of the washing powder:
1.Prepare warm water of 30 and a container.
2.Add the wash powder while stirring to fully dissolve it.
In selecting the posthaste program, it is suggested to adopt liquid
detergent instead of washing powder to guarantee the washing effect.
Put in the proper quantities detergent according to the water level and the
laundries quantities.
Washing powder with poor quality or long time storage maybe caked.
Please pay attention to cleaning the detergent box in time.
4 Put in the laundries
5 Close the top lid
Besides drainage if opening the top lid the washer will stop and give an alarm.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Use the operation buttons
a. Description of the function of buttons
Mode and meaning of the indicators
Digital tube
During sensing, it displays
Off
During operation of programs, it displays there mained time
(minute) or remained times of the corresponding procedure
On: indicate the program about to run, or indicate the
selected mode
No washing powder button
Push the button to set the wash function.
If "no washing powder " function is activated,
the "No washing powder " indicator is on.
You can then do washing without adding
detergent into the inner tub. The max laundry
volume is 5.0kg. The max water level is 8.
If "disinfect" function is activated, the "disinfect"
indicator is on to execute disinfecting function.
If "no washing powder " function is not activated,
the "no washing powder " indicator is off.
The programs will require detergent.
No Washing Powder
Disinfect
In "gentle" program, the "no washing powder"
button will not respond. Special detergent is
required.
NO WASHING POWDER
WASH
RINSE
SOAK
Wash button
Soak button
Rinse button
Push the wash button to set the
wash procedure.
Push the soak button to set the
soak procedure.
Push the rinse buttontosettherinseprocedure
During jean standardandcommonprograms, push
the rinse button to set different rinse times
( 0, 1, 2, 3, 4times)
During cotton , silk programs, pushtherinse
button to select rinse procedure, but the rinsetimes
cannot change.
During quick, posthaste, gentle programs, push
the rinsebutton , thespin procedure have no reaction.
During standard program, themachine issetto save
water program. Ifyoupushthe rinse buttonbefore
starting operation, itwill change to water storagerinse
program.
During common, standard jean
programs, push the wash button
to set different wash time :With
detergent: 0-25min Without
detergent: 11-35min.
During common ,standard ,
jean push the soak button to
set different soak time (10, 20,
30, 40 minutes).
During cotton programs, push
the soak button to select soak
procedure, but the soak time
can not change.
During cotton , silk programs,
push the wash button to select
wash procedure, but the wash
time cannot change.
During quick , posthaste,
gentle, silk programs, push the
soak button, the machine have
no reaction.
During quick, , posthaste,
gentle programs, push the wash
button the machine have no
reaction.
Remarks: For those large laundries
with high water absorption capability
such as pillow, bedspread, coat etc.,
Please select water-storage rinse
program to avoid splashing.
If the "no washing powder"
function is activated, the wash
time will increase for 10 more
minutes.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Sta
rt/P
ause
but
ton
Reserve/remain time indicator digitron
During sensing, it displays --
During reserve procedure, it displays the remained reserve time (in
hours)
During operation of programs, it displays the remained time (minutes).
If the remained time exceeds99 minutes, it adopts A at tens place to
After the power is switched on, push it to
start the machine
During working, push it to pause working.
During pause, push it to resume working.
represent 100 minutes,
represents103 minutes.
b
to represent 110 minutes. For instance, A3
In case of abcommon phenomenon, it displays
the abcommon symbol (see to Page 16)
Page16
Power On/Off button
Push the POWER button to switch
on the power.
When the power is on, push it
again to switch off the power.
Push the POWER button to switch
on the power.
If the start/pause button is not
pushed, the washing machine will
automatically switch off the power
after 5 minutes.
Time remained
(minutes)
STANDARD
COMMON
QUICK
COTTON
SILK
GENTLE
POSTHASTE
JEAN
Reserve
(hours later)
POWER
ON/OFF
START
PAUSE
RESERVE
WATER LEVEL
PROGRAM
SPIN
Prog
ram
selec
tion b
utton
Following automatic programs are available for selection
Program
Applicable situation
Water
leve
l butt
on
Spin button
common
Quick
Common washing
The washing machine can detect the laundries
automatically. After detection, it will set the water
level to suitable value among 4, 6, 8,and A
automatically.
You can also set water level by yourself. After the
machine is started, it will not set water level
automatically. You shall push the start/pause
button to make new setting.
If there's water inside the tub, the machine cannot
detect the laundries and will display water level 6 .
If wet laundries are put in, it may display water level
10 . You must set suitable water level by yourself.
If posthaste program is selected, it will display
water level 3 . When water level 1 is reached in
water filling, it will perform washing while filling
water. When water level 3 is reached, it
will change to common washing.
Push the spin button to set
the spin procedure.
Fast efficient washing for common laundries
Super quick wash of the laundry under 1
kg with light soil
Posthaste
Jean
During common, jean,
standard programs,
push the spin button to set
different spin time (from 0
to 9 minutes)
Washing the relatively big and thick laundries
Standard water saving washing
Washing the cotton textiles
Washing the silk textiles
Standard
Cotton
Silk
During cotton , silk
Washing for laundries with particularity
care
programs, push the spin
button to select spin
Gentle
procedure, but the spin time
cannot change.
During quick ,posthaste
gentle programs, push the
spin button, the machine
have no reaction.
During operation of wash and rinse program, you
can push down the water level button to add water.
When you release the button, or it reaches the
overflow water level, the machine will stop adding
water.
The water level decided may be different from actual
value because of the different moisture level of the
laundries.
Reser
ve bu
tton
Push this button can select washing closing time
range of choice for 2 ~ 24 hours.
After reservation starts up after hold "RESERVE "
button by hand can display reserving status.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
b.Steps of using the operation buttons and description
of the steps
ime remained
T
(minutes)
COMMON
QUICK
STANDARD
COTTON
SILK
No Washing Powder
POSTHASTE
GENTLE
JEAN
Reserve
(hours later)
Disinfect
START
PAUSE
POWER
ON/OFF
NO WASHING POWDER
WASH
RINSE
RESERVE
WATER LEVEL
PROGRAM
SPIN
SOAK
1.Push the "POWER ON/OFF " button to switch
on the power.
POWER
ON/OFF
2.Push the "PROGRAM" button to select
suitable automatic program
PROGRAM
After switching on the power, the machine will set common program automatically. To select other
automatic program, push the "program" button till the relative indicator is on. Refer to the "program
button" on Page 11 for the selection.
For instance: select "posthaste"program for laundries with small
Page 11
quantity and light soil.
In selecting the common, standard program,
COMMON
QUICK
STANDARD
COTTON
SILK
the machine will execute fuzzy program to select
water and wash time according to the cloth and
weight of the laundries. The full procedure is
controlled automatically.
POSTHASTE
JEAN
GENTLE
3.Push the "NO WASHING POWDER " button to select suitable function.
Push the "no washing powder " button till the relative indicator is on. Refer to the "program" button
on page 10 for the selection.
When"No washing powder" indicator lamp is not on it is the
program for using the washing powder.
WASH
RINSE
SPIN
SOAK
4.Push the "SOAK" , "WASH", "RINSE", "SPIN"
button to select suitable procedure.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
After switching on the power, the washing machine will set to common program including"wash, rinse,
spin "automatically. To select other procedures, push the "soak", " wash", " rinse" or "spin" button
to select the time of soak, wash and spin, and the times of rinse. After switching on the power, if you
push one of the button among "wash", "rinse"and"spin", the digitron of the former procedures will
turn off automatically. The former procedures will not run. For instance: after switching on the power. If
you push the "spin" button first, it will execute spin singly after starting.
Attention
Even there's no water in the tub, a certain period is
required before spin starting.
Do not use the soak program for the woolen textiles.
Separate the laundries that are not colorfast from
other laundries in washing.
When high water level is selected, the pulsator will rotate
discontinuously when the water level reaches 1.
The soak procedure can work in cooperation with automatic programs like common, jeans, gentle and
cotton. There is intermittent pulsator stirring during soak.
5.Press " WATER LEVEL "button,
select suitable water level
WATER LEVEL
After switching on the power, the washing machine will execute fuzzy program automatically to detect the
cloth. After defection, it can set the water level automatically. To select other water level, first push the
"start/pause" button, then push the "water level" button to set the water level. Refer to "water level button"
in page 11 for selection.
Page 11
13
Download from Www.Somanuals.com. All Manuals Search And Download.
6.Push the "RESERVE" button to select suitable reserve wash program
RESERVE
After switching on the power, the reserve program is set to off mode automatically. If you need to set the
washing procedure to be finished at reserved time, please push the " reserve " button to set the reserve
wash program. Refer to reserve button in Page 11 for selection.
Page
Confirm the operation of reserve program
When the "reserve" function is activated, the indicator light of the program you have set
will be off. The "reserve (hour)" and "time remain" indicator lights will be on. During
reserve procedure, push the "reserve" button to display the reserve mode.
To change the running program or cancel the reserve setting, you
need to switch off the power and make new selection.
the washing will be finished after 18 hours.
7.Push the "START/PAUSE" button
START
PAUSE
7 Finish washing
After finishing wash it'll be off automatically.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
8 Disposal after washing
Please first pull off the power plug from the receptacle before cleaning.
After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise it may influence
your using the machine.
If the tap water quality isbad, it can generate scale attachedonto the water injection box and filling entrance
of outer tubcover. When using, please scouroff the scalewith wiping rags dipping with an amount of
detergent or abstergentto prevent theclothes from contamination.
The lint filter must be used during washing.
The detergent boxshould be dismantledand washed
by water.
It must be cleaned in time after each using
1.The method of dismantle: Push it up aslant and gently.
The installing and dismantling method of lint
filter as follows:
2.The method of install : install it upwards and aslant and
push it in .
Press down elastic trip at upper end of lint filter to
make the claw of elastic trip relieving from the filter
cover and pull lint filter outward. Insert lower end of
lint filter into the filter cover and push upper end into
filter cover and secure to fit on lint filter.
After washing, dismantlethe lint filterand take
down back coverof filter toclean off thelint.
Lint filter
Filter cover
Lint filter
Dismantle
Dismantle
Install
Lint filter cover
Install
Install and dismantle the lint
filter cover
Install and dismantle the lint filter
Dismantle
Install
Note: after installation check whether theedges
on both sidesof filter isin flush withthe filter cover
or the filterfalls out byshaking slightly toavoid the
fallout due tofilter not installedin place.
The filter screen of the water inlet valve is likely to be
blocked by foreign materials and influence the water
inlet.
If the cabinet is dirty, wipe it with wet cloth
Do not flush it directly with water.
Wipe it with neutral detergent.
Please clean it with brush every two months.
Do not wipe it with thinner, petrol, alcohol etc.
er
Petrol
inn
Th
Alcohol
1.After washing, close the water faucet. ( If needed, you can dismantle the water inlet hose).
2.Do not store water in the washing machine for a long period. Drain the water completely after each using.
3.Be sure to pull off the power plug before maintenance.
4.Hang up the power cord and drain hose.
5.Wipe off the water drops on the surface of the machine and inside the tub. Open the top lid for some time
(about 1 hour), then close the top lid.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Trouble-shooting Answer to question
(If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns
sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special
maintenance department or after-sale service department of our company. Do not repair it by yourself.
Phenomenan
The reason
The top lid is opened during reserve
procedure.
How to settle
The digitron displays E0.
Close the top lid.
Put down the drain hose. Open and close the
top lid once.
Is the drain hose put down?
Is the drain hose blocked?
The drainage cannot work, or is too slow.
The digitron displays E1.
Clean the foreign material. Open and close
The top Lid Once.
It stops running in midway. The digitron
displays E2.
The top lid is not closed.
Close the top lid.
Reorder the laundries. Close the top lid.
Place the machine horizontally. Open
and close the top lid once.
The safety switch acts, and the
spinning cannot work. The
digitron displays E3.
Are the laundries put slantingly?
Is the machine slanting?
Open the water tap. Push the start/pause
button once.
Clean the water inlet valve then push
the start/pause button once.
Open and close the top lid once..
Is the water tap opened, or is there water
supply failure?
Is the water inlet valve blocked?
Is the water pressure too low?
The water filling does not work, or is
slow. After about 30 minutes later,
the digital displays E4.
Please contact the after-sales
service department.
The water level sensor is bad.
The digitron displays E6.
The digitron displays EE.
Open the water tap. Push the start/pause
button once.
Clean the water inlet valve then push
the start/pause button once.
Is the water tap opened, or is there water
supply failure?
Is the water inlet valve blocked?
Please use it when there's power supply.
Insert the power plug tightly.
Fill water to the preset position.
Is there power failure?
Is the power plug inserted tightly?
Is the water level reached preset position?
Not wash
The machine does
not act
Is the power plug inserted tightly?
Is the top lid closed reliably?
Are the laundries set flat?
Insert the power plug tightly.
Close the top lid.
Set the laundries flat.
Not spin
Adjust the machine to be even
Reorder the laundries and close the top lid.
Remove the foreign materials.
Is the machine slanting?
Are the laundries put slantingly in spinning?
Are there any foreign materials?
There's abnormal sound
inside the machine
The water tap leaks
Is the screw of the jointer of water
inlet hose loose or awry?
Fasten the screw of the jointer properly.
Common phenomena
Explanation
Phenomena
* The spinning is intermittent when it starts
* The wash procedure pauses.
* Balance the laundries to avoid slanting.
* The cloth sensor is detecting the cloth. It will start adding water
after about 48 seconds.
* The program is setting the drain time. A certain period is needed
before it starts spinning.
* Select Spin program, but it doesn t work.
* It is to avoid splashing during water filling.
* The pulsator pauses during washing, rinsing or adding water.
* There may be some water flowing out of the drain hose in the first
use of the machine.
* It is the water remained in the performance inspection by the factory.
* When selecting " No washing powder " function, what is expelled
from the drainpipe is disinfector during water filling, which can
sterilized the gully and wiping rags, etc.
* When selecting " No washing powder " or " Disinfect " function,
there is a small quantity of water flowing out of the drainpipe
during water filling.
* When selecting " Disinfect " function, what is expelled from the
drainpipe is decontaminating water during water filling, which
clean the gully and wiping rags, etc.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Packing list
Name
Quantity
One
User's manual
Components of the
water inlet hose
One
One (Between the upper cushion of the washing machine
package and the upper seal of the package carton)
Bottom plate
Four
One
Tapping screws
Inner cover
component
Environment-friendly
double-drive automatic
washing machine
One
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Specification
1/18L 2/24L 3/29L 4/34L 5/38L
6/42L 7/46L 8/50L 9/54L 10/59L
Water level/Water quantity(about)
Injection pressure
~
0.03MPa 1MPa
This washer can run for tenyears (equivalent times)if using the no washing powder
function and running three times weekly. After running up tothe above number
this washer can still be used as a common double-driver washer.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
|