Automatic Washing Machine
User's manual
This manual is for
XQB50-10A
Please read this manual
carefully before using.
Retain it for future reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Using
Names of the parts
Top lid A
Top lid B
water valve
Sop mat
Detergent box
Cabinet handle
Drain hose
(Installed by user)
Lint filter
Control panel
Filter cover
Inner tub
Power line
Control panel
film
Pulsator
back cover
Cabinet
fixed foot (3)
base frame
Adjustable foot
Accessories
Bottom plate
(one)
Meaning and description of the symbols
Contents marked with that symbol
are related to the safety of the
Warning sign
product and the personal safety
of the users. Please operate in
strict conformity to the contents,
otherwise it may cause damage
of the machine or injure the
personal safety of the user.
water inlet hose
(one)
Drain hose
Contents marked with that symbol
Forbidden sign
Drain hose
support
are actions forbidden to perform.
Performing of those actions may
result in damage of the machine
or injure the personal safety of
the user.
tapping screws
ST4X16
(eight)
Lint filter
(two)
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Using
Safety precautions
Please plug the plug on special 120V AC
receptacle.Please guarantee that the
earthing wire is ear-thed reliably.
The power cord plug should be convenient
to be pluged in or pluged out with hand
while the washing machine runs normally.
Be sure to pull the plug out and close the
water tap when the machine is idle,when
moving the machine,or when cleaning
the machine.Do not use wet hand to ins-
ert or pull out the power plug.
A tierra
Do not bend ,extend,twist,bind by force.Do not press or nip it with weight.
Keep the pin of the power plug clean,if the power plug is polluted with dust,
please wipe with dry cloth carefully.
Do not put the machine at damp place like
Do not use water hotter above 50 C .
the bathroom. Never wash it with water.
Do Not put wet laundries on the control panel.
In case the washing machine is installed on ground with
Do not wash water-proof laundries like the raincoat,
carpet, do not block the ventilation hole with carpet.
bike covers etc. to avoid abnormal vibrations in spinning.
The ventilation holes
at the bottom
soft items
Do not let the machine share one receptacle with other electric appliances. If the power plug is damaged, or the
plugging into the receptacle is loose, do not use the plug any more.
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Using
Do not stretch hands into the working
machine. It is dangerous even if the
rotation is slow. Take special care of
the children.Do not let the children
climb the washing machine.
Do not decompose, repair or alter the
machine by yourself.
Do not put any hot or heavy items (such
as the kettle with hot water ) on the
washing machine.
Do not wash laundries with volatile
materials (such as thinner, petrol etc.)
er
Petrol
inn
Th
The handicapped or children without
care shall not use the machine.
Keep the machine away from direct
sunlight and heat source like the heater.
To prevent your laundries and washing
.
To prevent the lint in the tub from blocking
the cascade outlet and influencing the
cascade effect, please keep the lint filter
in good condition, and install it to proper
position during washing.
machine from damage,be sure to take
out all of the foreign materials from your
pocket,such as coins,buttons,sand or
hairpins etc.
Before washing,please check if the water
tap is open ,and if the water inlet pipe is
connected properly.
It is suggested to use low-foaming was-
hing powder
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Using
Installation and adjustment
Please install and adjust the machine according to the requirement of the manual. It is
very important to your security and correct operating the machine.
Install the lint filter
Install the bottom plate
After you open the package,
please lean the washing
1.Press downward to assmble.
2.Pull upward to detach.
Back
Front
machine gently down on soft
items ( like the towel cloth,
blanket, etc. ). Install the
bottom plate to the bottom of
the machine with the eight
Soft items
Screw
screws by a cross screwdriver,
then lift the machine up gently.
See to the figure:
Bottom plate
Pull down
Put up
Put up
Pull down
Adjust the installation position
The largest allowed slope of the
shank base of the machine is 2 .
The slanting or rough ground will
result in unstable running or
stoppage of the machine. Please
adjust it with following methods:
Adjust the adjustable foot:
1.To twist the adjustable foot, please
first lift up the side of the foot slightly,
loosen the adjustable nut, and twist
adjustable nut
Fasten
adjustable foot
Loosen
the foot.
2.Fasten the nut after adjustment.
High
Low
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Using
Usage of the drain hose
The drainage shall be smooth with the drain hose.
1.put the drain hose up to suitable position. Do not put it
on ground
2.Do not step on or press the drain hose.
Notes: the highest point of drain pipe should be higher than
the water level of washing tub for avoiding to siphon
phenomenon during drain.
The highest point
0.8m<H<1.2m
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using
Install the water inlet hose
Install the water inlet hose
1. Insert a new flat washer into each end of the inlet hoses. Firmly put the
washers in the coupling.
Note:
Use the new hose sets supplied with the washer.
Any other old hose sets should not be used.
You may have to use pliers to tighten the coupling.
Do not over tighten because you may cause
damage to the valve.
2. Connect the water inlet hoses to the water faucet.
3. Connect the other ends to their respective cold and hot water inlet valve
located at the rear of the washer
Nut of the water inlet hose
Water absorption cushion
Jointer of the water inlet valve
4.Fasten the nut. Swing it gently to confirm if it's suitable.
Check the connection between the water inlet
hose and the water tap
1.Swaying the hose gently to confirm if it is fastened
stable.
2.After installation, open the tap to check if it leaks.
3.Do not bend the hose with overstrain.
4.Before each usage please check if the connection
between the water inlet hose and the water tap,
and the connection between the water inlet hose and
washer are firm, so as to prevent dropping from
improve Installation position.
Take down the water inlet hose
1.Close the water tap.
2. Pull off the water inlet hose from the water tap
and washer
Download from Www.Somanuals.com. All Manuals Search And Download.
Using process
1 Preparation before washing
Preparation before washing
1. Connect the water inlet hose.
2. Confirm that the washing machine is earthed
reliably. Then insert the power plug into the
receptacle. Do not connect the earth terminal
to the gas pipe and tap water pipe.
3. Hang up the drain hose.
Pay attention to followings before washing the laundries
Confirm
if
Clear the pocket. Fasten the
The quantity of
When the pulsator
there's special Take out the
requirment for coins , sand,
the laundries. hairpins etc.
buttons and
zippers.
the laundries is running , the
shall not exceed buttons of the
the rated value. laundries may
The big laundries cause noise. For
like the jeans
shall be put in
loosely.
t h e s a k e o f
discretion,please
put the laundries
with buttons into
other laundries.
A. Check if the laundries are applicable for washing with machine.
b. Divide the laundries that are not colorfast from other laundries.
c. Put those laundries difficult to absorb water into water with hand.
d. For those laundries with heavy soil, please first remove the dirt like mud or dust.
For the parts with heavy soil, please apply detergent on them in advance, which
can make it easier to remove the soil.
e. For those laundries that may get lint ball and those with long fur, turn it over before
putting in.
f. Do not put those laundries polluted by chemicals into the washing machine directly.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using process
2 Put in the laundries
The capacity of washing and spinning of the
machine refer to the largest weight of the standard
laundries under dry condition that can be washed
or spinned in one time. One time washing quantity
shall be lower than the rated capacity. The largest
capacity of this machine is 5.0kg.
The thickness, size, type of the cloth will influence
the actual washing capacity. It is suitable for one
time washing to put in reasonable amount of
laundries and the laundries can be turned round in
washing.
Do not select "High" water level for laundries small
than 0.5kg, so as to avoid splashing of water.
Reference weight of the laundries:
working suit up,down
cotton,about 1120g
jeans about 800g
blanket
cotton,about 900g
blending coat
(about 800g)
pajamas
jacket
cotton,about
800g
shirt
cotton,about
300g
single bed sheet
cotton,about 600g
undershirt
cotton,about 180g
Socks
blending,about 50g
underpants
cotton,about 70g
Download from Www.Somanuals.com. All Manuals Search And Download.
Using process
3 Put in the detergent
Inlet for concentrated washing
powder and detergent
How to use the washing
powder
Direct dissolved in the machine
1.Fill water to "Low" water level.
2.Add the power. Run for 30 seconds
to dissolve it completely.
3.Put in the laundries. Select
suitable water level.
Detergent box
The instant dissolving of the washing
powder:
How touse thewhitener
1.Prepare warm water of 30 and a
container.
2.Add the powder while stirring to
fully dissolve it.
Put in the prorer quantities detergent
according to the water level and the
laundries quantities .
It is suggested not to use high
sudsing detergent.
Fill water to decided level. Dilute
the whitener with container. Pour
it slowly into the washing tub.
Avoid using whitener on
laundries with color or pattern as
they are prone to lose color.
The whitener shall not touch the
laundries directly.
Washing powder with poor quality or
long time storage maybe caked.
Please pay attention to cleaning the
detergent box in time
Refer to the user's manual for
the usage and quantity of the
whitener.
For powder whitener, please
dissolve it before use.
Standard usage quantity of the detergent and water
quantity
Common powder
Concentrated
powder
(Add 25g in each
30L water)
Laundries
quantity(kg)
Water level Water quantity
(Add 40g in each
30L water)
Above 3.5
2.0~3.5
HIGH
About 64g
About 49g
About 40g
About 48L
About 37L
MEDIUM
About 36g
About 40g
About 27g
About 25g
About 17
LOW
About 30L
About 20L
1.0~2.0
VERY LOW
Below 1.0
Download from Www.Somanuals.com. All Manuals Search And Download.
Using process
4 Use the operation buttons
a. Description of the function of the buttons
SURPLUS(MIN)
To indicate -- during sensing.
To indicate remaining min. During
program running.
To indicate remaining reserved
time (hrs) during reservation period.
To indicate fault symbols for abnormal
conditions (see page 15)
Page 15
PROGRAM STATUS
PROCEDURE STATUS
STANDARD
HEAVY
SOAK
WASH
RINSE
SPIN
GENTLE
QUICK WASH
WASH
SPIN
PROGRAM
RESERVATION
WATER LEVEL
" button
RESERVATION
"PROGRAM/
" WATER LEVEL"button
Press"PROGRAM/RESERVATION " button
you can select one or several programs of
Standard,J eans,Gentle,Quick,Rinse and Spin.
Press"PROGRAM/RESERVATION " button
over 2 seconds, you can select the program
of peservtion.the Nixie tube displays the
reserved hrs to the wash cycle end. The
indicator flashes to indicate in-reservation.
The user selects a suitable water level
depending on the load.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using process
"POWER ON/OFF"button
Press "Power On/Off" button to connect
power supply.
After power is connected, pressing this
button will cut off the supply.
"START/PAUSE"button
After the power is switched on, press it to
start the machine
During working, push it to pause working.
During pause, push this button to restart
and continue operation.
XQB50-10A
POWER
START
PAUSE
ON/OFF
Remarks: After pressing "Power On/Off" to connect power supply, if the washing machine
lasts idle more than 10 min, it would automatically shut off the supply.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using process
b. Operating procedure and explanations for the
buttons
PROGRAM STATUS
PROCEDURE STATUS
XQB50-10A
STANDARD
HEAVY
SOAK
WASH
RINSE
SPIN
GENTLE
QUICK WASH
WASH
SPIN
POWER
ON/OFF
START
PAUSE
PROGRAM
RESERVATION
WATER LEVEL
1 Press the "Power On/Off" button to switch on
the power supply
POWER
ON/OFF
2 Press the button of "Program/Reservation" to select
a suitable full-automatic program
PROGRAM
RESERVATION
After switching on, the "Standard" program will be the default. If other full-automatic program is
desired, you can press the button "Program" to get the corresponding indicator on. Refer to the
"Button of 'program'"paragraph on page 9.
Example: Use the "Quick" program for slightly soiled articles.
Page 9
When "standard" or "Jeans" program is selected, the
washing machine will perform full-automatically
controlled fuzzy program to set water level, water flow and
wash duration according to the cloth nature and weight
Download from Www.Somanuals.com. All Manuals Search And Download.
Using process
Attention
Even there's no water in the tub, the
spinning will start after a certain period.
Do not use soak process for woolen laundries.
Wash the laundries that are prone to lose
colors separately from other laundries.
The pulsator will not rotate unless the
water is filled to selected water level.
Selection method of the procedure programs
Times of pushing
the"Program
select"button
Selected procedure
program
Corresponding
program
Total Time
Applicable procedure
When the common
laundries need washing
rinse and spin
Wash(bb) Rinse(cc)
Spin(dd)
Standard
0
1
2
3
4
5
About 39~44
About 64~89
If the laundries are very
dirty, or the sleeve and
collar are dirty, first soak Rinse(cc) Spin(dd)
then wash
Soak(AA) Wash(bb)
JEANS
When the laundries
Wash(bb) Rinse(cc)
Spin(dd)
About 34
GENTLE
needs to be washed
carefully such as woolen
textiles or underwear.
When the laundries is
lightly soiled that needs
to be washed quickly.
Wash(bb) Rinse(cc)
Spin(dd)
QUICK WASH
WASH
About 10
About 13~18
About 9
When the common
laundries need only
washing
Wash(bb)
Spin(dd)
When the laundries need
only spinning after
manual washing
SPIN
(first drain then spin)
If you push the "Process selector" button for 6 times, it will resume the original
mode, and it will circulate like that.
Time list of each program (minute)
Soak
(min)
Wash
(min)
Rinse
(min)
Spin
(min)
Program
Standard
Total time(min)
About 39~44
About11~16
/
Rinse twice,each about 3
Rinse twice, each abut 3
About 6
About
25~45
About10~16
About6
About 6
Jeans
About 64~89
About 34
About 6
About 2
Gentle
Quick
/
/
/
/
Rinse once, about 2
Rinse twice, about 2
About3
About 10
About 13~18
About11~16
Wash
Spin
/
/
/
About 9
About 6
/
Download from Www.Somanuals.com. All Manuals Search And Download.
Using process
Total time: including the normal water inlet time, drain time, excluding the power off time. The
total washing time may be influenced by the water inlet pressure and water level.
Spin time: the time from intermittent running to finishing.
The Jeans program could combine the process of soak during which the washing
machine firstly soak for about 25~45 min after water filling and then begins to wash.
When "Quick wash" program is chosen, the washing machine would automatically set water
level and full processes of wash, rinse and spin.
3 Press the "water level" button to select suitable
water level
WATER LEVEL
After switching on the power, press the button "Water level" to select a water level according
to the load. Please refer to the paragraphs “Detergent standard dosages and water levels"
and "Button of Water level" on page 9.
Page 9
4 Push the "Reservation" button to select
suitable reserve program
PROGRAM
RESERVATION
After switching on, the washing machine reserved wash program will be automatically set
inactive. If you desire a wash cycle to end at a reserved time, you can press the "Reservation"
button to set a reserved wash program. Refer to "The button of Reservation" on page 9.
Confirm the reserve program
Page 9
When "Reservation" becomes active, the nixie tube
displays the time to the end of the reserved wash cycle, and
the indicator turns on.
To change the running program or cancel the reservation,
you should cut off the supply and reselect.
the washing will finish
about 18 hours later
START
PAUSE
5 Press the "start/pause" button
5 Close the top lid
When the machine working, if the
top cover is opened, the washing
machine will stop running and alarm.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using process
6 Finish washing
The washing machine cuts off the power supply
automatically when wash cycle ends.
After Finishing wash
alarm automatically
Disposal after washing
After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise it may influence
7
your using the machine.
Please first pull off the power plug from the receptacle before cleaning.
When washing, lint filter must be used
After using, please clean it in time.
Lint filter:
Figure 1
1.Pull upward to detach
Clean
2.Clean the lint
Put it in water and clean while it is still wet.
(See to Figure 1).
Put up
Put up
Pull down
Figure 2
Pull down
3.Press downward to assemble.
If the cabinet is dirty, wipe it with wet cloth
Do not flush it directly with water.
The filter screen of the water inlet
valve is likely to be blocked by
foreign materials and influence the
water inlet. Please clean it with
brush every two months.
Wipe it with neutral detergent.
Do not wipe it with thinner, petrol, alcohol
etc.
l
r
Alcoho
Petrol
ne
Thin
1.After washing, close the water faucet. ( If needed, you can dismantle the water inlet hose).
2.Do not store water in the washing machine for a long period. Drain the water completely after each using.
3.Be sure to pull off the power plug before maintenance.
4.Hang up the power cord and drain hose.
5.Wipe off the water drops on the surface of the machine and inside the tub. Open the top lid for some time (about 1 hour),
then close the top lid.
Download from Www.Somanuals.com. All Manuals Search And Download.
Trouble shooting Answer to question
(If there's breakdown, please pull off the power plug before checking) The following
phenomena are not breakdowns sometimes. Please confirm again before sending it to
repair. If there are real breakdowns, please come to the special maintenance department .
Do not repair it by yourself.
Phenomena
The reason
How to settle
Buzzing upon reservation starts,
Nixie tube indicates "E0"
The top lid is not closed
Close the top lid
Put down thedrain hose. Open
and close thetop lid once.
Clean the foreignmaterial.
Open and closethe top lidonce.
Is the drain hose put down?
No or slow drain, nixie tube
indicates "E1" , buzzing.
Is the drain hose blockedby
foreign material?
Running pauses during spin,
nixie tube indicates "E2”,
buzzing
The top cover leaves open
Close the top lid
Are the laundriesput slantingly?
Is the machine slanting?
Re-order the laundries. Close
the top lid.
Level the machine in right
position. Open and close the
top lid once.
Safety switch actuates, not
spin, (after self-correction
twice), nixie tube displays
"E3", buzzing
Open the water tap. Push the
"Start/Pause" button.
Clean the water inlet valve.
Push the "Start/Pause" button.
Wait for the normal water
pressure before use.
The water tap is not open
No or slow water filling (not
reaching the level in 15 min),
nixie tube indicates "E4",
buzzing
The water inlet valve is blocked
The water pressure is too low
and the current istoo small
Is there power failure?
Is the power plug loose?
Use it when the power is on.
Insert the power plug tightly.
Affusion to the set water level.
Not wash
The machine does
not act
Does the water level arrive at the
set water level?
Is the power plug loose?
Is the top lid closed?
Insert the power plug tightly.
Close the top lid
Put the laundries orderly.
Not spin
Are the laundries put orderly?
Level the machine properly.
Fasten the buttons and zipper
Is the machine slanting?
There's abnormal sound
inside the machine.
Is there metal material inside
the washing machine?
Are the laundries slanting in
spinning?
Reorder the laundries. Close the
top lid.
Is the power plug loose?
If the water faucet is turned on?
If Power On/Off and
Insert the plug firmly
Turn on the water faucet
Press Power On/Off and
Start/Pause
No water filling
Start/Pause are pressed?
Use it when the power is on.
Insert the power plug tightly.
The machine does not act.
(the indicators are off.)
Is there power failure?
Is the power plug loose?
Download from Www.Somanuals.com. All Manuals Search And Download.
Common phenomena
Phenomena
Explanation
The spinning is intermittent when it starts.
Balance the laundries to avoid slanting.
Push the"PROGRAM /RESERVATION" button to
select "Spin", but it doesn't work.
The program is setting the drain time. Some time is
needed before it starts spinning.
There may be some water flowing out of
the drain hose in the first use of the machine.
It is the water remained in the factory inspection of
performance.
While water filling in wash and rinse, the
pulsator pauses rotation
To prevent splash during water filling.
Wash pauses
Supplementary water filling 48 s after
sensor tests cloth material.
Packing list
Name
Quantity
Storage position
Inside the document bag
User's manual
One
Components of the water
inlet hose
Inside the accessory bag
One
One
Between the upper cushion of the washing machine
package and the upper seal of the package carton
Bottom plate
Drain hose
Inside the accessory bag
Inside the accessory bag
Inside the accessory bag
One
One
Eight
Drain hose support
Tapping screws ST4x16
Inside the accessory bag
Lint filter
Two
One
Automatic washing machine
Download from Www.Somanuals.com. All Manuals Search And Download.
Specification
XQB50-10A
5.0kg
Model
Rated washing / spinning capacity
Water level/Water quantity (about)
Lowest/20L Low/30L Mid/37L High/48L
About 144L (High water level; Standard program)
Max water consumption
Water inlet pressure
0.03MPa-0.78MPa
325W
Rated washing power
Rated spinning power
Weight
285W
About 39kg
Dimension
L 510mm W 500mm H 882mm
Download from Www.Somanuals.com. All Manuals Search And Download.
|