XQB100-96
Automatic Washing Machine
Contents
Before using
Names of the parts....................the 2nd cover
Safety precautions .............................1
Installation and adjustment .......................3
Install the water inlet hose..................4
Using process
Preparation
before washing ..................6
Put in the laundries .........................7
Put in the detergent ..............................8
Close the top lid ..............................8
Select water level............................9
Press the POWER button.......................9
Select program.................................9
Press the START/PAUSE button..............10
The washing is finished .......................10
Disposal after washing ................................11
Please read this manual carefully before using.
Please retain it for future reference.
Please check if the power receptacle is earthed
reliably before usage to guarantee your safety
The manufacture is not responsible for any risks
occurred owing to disobey these stipulations.
Troubleshooting Answer to question.....12
Packing list ..........................13
Specification....................the back cover
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Using
Safety precautions
Ensure that the earth terminal of the power
receptacle is earthed reliably.
Be sure to pull the plug off when the machine
is idle or when cleaning the machine. Plug
prongs shall be kept clean.
If the power line is bad, to avoid risk it is required to have it replaced by the technicians
of our special shop or our agent or the after-sale service department. Keep the pin of
the power plug clean.
Do not put the machine at damp place
like the bathroom . Never wash it with
Do not use water hotter than 50
water. Do not place wet laundries on the
control panel.
Do not let the machine share one receptacle
with other electric appliances. If the power
plug is damaged, or the plugging into the
receptacle is loose, do not use the plug any
more.
Do not wash water-proof laundries like
the raincoat, bike covers etc. to avoid
abnormal vibrations in spinning.
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety precautions
Do not decompose, repair or alter the
machine by yourself.
Do not stretch hands into the working
machine. It is dangerous even if the
rotation is slow. Take special care of
the children.
Do not put any hot or heavy items (such
as the kettle with hot water ) on the
washing machine.
Do not wash laundries with volatile
materials (such as thinner, petrol etc.)
Petrol
inner
Th
The handicapped or children without
care shall not use the machine.
Keep the machine away from direct
sunlight and heat source like the heater.
To prevent your laundries and washing
machine from damages, be sure to take
out all of the foreign materials from your
pocket, such as coins, buttons, sand or
hair pins etc.
In case the washing machine is installed
on ground with carpet , do not block the
ventilation hole with carpet.
Before washing, please check if the
water tap is open, and if the water inlet
pipe is connected properly.
It is suggested to use low-foaming
washing powder.
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Using
Installation and adjustment
Please install and adjust the machine according to the requirement of the manual. It is
very important to your security and correct operating the machine.
Adjust the installation position
The largest allowed slope of the base of the machine is 2 . The slanting or rough
ground will result in unstable running or stoppage of the machine. Please adjust
it with following methods:
Adjust the adjustable foot:
Confirm it's horizontal:
1.To twist the adjustable foot, please first lift up
Hang the lead line to confirm
the side of the foot slightly, and twist the foot.
if it is horizontal.
2.Fasten the nut after adjustment.
Adjustable foot
High
Low
Install the drain hose
Put the drain hose clamp on the outer drain hose,
insert the outer drain hose into the joint for it, and
then clutch tightly with drain hose clamp.
Drain hose
Drain hose clamp
Drain hose joint
Usage of the drain hose
The drain hose shall drain smoothly
1.The height of the drain hose shall be
less than 10cm, or the drainage will not
be smooth, and cost such long time that
the machine may stop at mid way.
If the drain hose is too long, cut it at mid
point. To make smooth drainage, cut the
front end of the hose slantingly.
4.If extra drain hose is needed, please
make separate purchase. The inner
diameter of the extra hose shall not
less than 30mm, and the length shall
not exceed 1.5m.
2.Do not tramp or press the drain hose.
Install the lint filter
After opening the package, please take out the lint filter
from the document bag and install it into the frame of
the inner tub. See to the right Figure.
Filter frame
Lint filter
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Using
Install the water inlet hose
Confirm the water faucet
Water faucet,not suitable
Water faucet,suitable
Outlet end surface
>10mm
It is required that the front end shall be longer than 10cm.
The outlet end surface of the faucet shall be flat and smooth. If not please file it
to avoid leakage.
Connection between the water inlet hose jointer and
the water faucet
1.Press the lower end of the lock lever and push down the slider. Take off the water inlet
hose jointer from the water inlet hose component. See to Figure 1.
2.Loosen the screw till the water faucet can be accessed. Put the jointer of the water
inlet hose on the faucet. See to Figure 2. (If the faucet is too large and the jointer can
not be set on the water faucet, please loosen the four screws and take out the
bushing in the jointer. See to the figure.)
Water inlet pipe jointer
Screw
Slider
Mark label
Screwdriver
Liner
Locking lever
Water inlet pipe
Figure 1
Figure 2
Figure 3
3.Fasten the four screws evenly. See to Figure 4.
4.Take off the nameplate. Twist the fastening nut as per the indication of the figure to
seal up the outlet end surface of the faucet. See to Figure 5.
Remarks: Before installation, the threading is 4mm above the upper surface of
the nut. After installation, the threading is 2mm above the upper surface of the
nut. See to Figure 6.
About 4mm before twisting
About below 2mm after twisting
Nut
Figure 4
Figure 5
Figure 6
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Using
Connection between the water inlet hose and the
washing machine
1.Do not take off the water absorption
cushion. Please check if the cushion
is dropped or damaged before each
usage. If it happens please contact
our after-sale department immediately.
2.Put the nut of the water inlet hose on
the valve jointer.
Nut of the water inlet hose
3.Fasten the nut. Swing it gently to
confirm if it's suitable.
Water absorption cushion
Jointer of the water inlet valve
Connection between the jointer of the water inlet
hose and the water inlet hose
1.Push down the slider. Insert the
The jointer of the
water inlet hose
water inlet hose into the jointer.
2.Hang the lock lever to the jointer.
Release the slider till a click
sound is heard.
Slider
Locking lever
Check the connection between the jointer of the
water inlet hose and the water faucet
1.Swing the hose gently to confirm if it is fastened stable.
2.After installation, open the faucet to check if it leaks.
3.Do not bend the hose with overstrain.
4.Before each usage please check if
the connection between the jointer
of the water inlet hose and the water
faucet, and the installation of the
water inlet hose are firm, so as to
prevent dropping from improper
Installation position.
Dismantle the water inlet hose
1.Close the water faucet.
2.Press the locking lever. Push down the slider. Then
pull of the water inlet hose. If the machine is used
more than once every week, the jointer of the water
inlet hose can be kept on the faucet to prevent
damaging the fixing screw.
Locking lever
Slider
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Preparation before washing
Using process
Preparation before washing
1.Connect the water inlet hose.
2.Confirm that the washing machine is
earthed reliably. Then insert the power
plug into the receptacle. Do not connect
the earth terminal to the gas pipe and
tap water pipe.
3.Put down the drain hose.
Pay attention to followings before washing the laundries
When the pulsator
is running, the
buttons of the
laundries may
cause noise. For
t h e s a k e o f
discretion, please
put the laundries
with buttons into
other laundries.
The quantity of
the laundries
shall not exceed
the rated value.
The big laundries
like the jeans
shall be put in
loosely.
Clear the pocket.
Take out the
coins, sand,
Confirm
if
Fasten the
buttons and
zippers.
there is special
requirement for
the laundries.
hairpins etc.
a. Please check if the laundries are applicable for washing.
b. Separate those not colorfast from other laundries.
c. For laundries not water absorbing, please put them into water with hands.
d. For laundries with much soil, please remove the soil first. You can add detergent on the
part with serious soil directly. It is much easier to remove the soil by that mean.
e. For laundries likely to get lint ball or with long fibre, please first turn the inside out before
putting them into water.
f. Don't put the laundries polluted with chemicals directly into the washing machine.
g. For those small laundries, laundries likely to be twisted or be twisted or worn, and woolen
Laundries, please put them into mesh bag before washing.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using process
2 Put in the laundries
The capacity of washing and spinning of the machine
refer to the largest weight of the standard laundries
under dry condition that can be washed or spined in
one times. Washing quantity shall be lower than the
rated capacity.
The largest capacity of this machine is 10.0kg.
The thickness, size, type of the cloth will influence the
actual washing capacity. It is suitable for one time
washing to put in reasonable amount of laundries
and the laundries can be turned round in washing.
Do not select high water level for laundries small than
4.0kg, so as to avoid splashing of water.
Reference weight of the laundries:
working suit up, down
cotton, about 1120g
Jeans about 800g
Blanket
cotton, about 900g
blending coat
about 800g
Pajamas
Jacket
cotton, about
800g
Shirt
cotton, about
300g
Single bed sheet
cotton, about 600g
Undershirt
cotton, about 180g
Socking
blending, about 50g
Underpants
cotton, about 70g
Download from Www.Somanuals.com. All Manuals Search And Download.
Using process
3 Add the detergent
How to use the washing powder
Direct dissolved in the machine(not applicable for fuzzy
and reserve programs)
1.Fill small quantity of water.
2.Add the power. Run for 30 seconds to dissolve
it completely.
3.Put in the laundries. Select suitable water level.
How to use the whitener
The instant dissolving of the washing powder:
1. Prepare warm water of 30 and a container.
2. Add the powder while stirring to fully dissolve it.
Fill water to decided level .Dilute the whitener with
container. Pour it slowly into the washing tub.
The powder is more prone to pollute the laundries than
the detergent. Therefore please use it with proper quantity.
Avoid using whitener on laundries with colour or
pattern as they are prone to lose colour.
The whitener shall not touch the laundries directly.
It is suggested not to use high sudsing detergent.
Refer to the user's manual for the usage and
quantity of the whitener.
Washing power with poor quality or not used for a long
period may get blocked. Please clean the detergent box
in time.
For whitener powder, please dissolve it before use.
Standard dosage of the detergent and water quantity(suggest)
Common powder,
Add 40g in each 30L water Add 25g in each 30L water
Concentrated powder,
Water
quantity
Laundries
quantity
(kg)
Water
level
High
Medium
Low
4 Close the top lid
If you open the top lid,
the machine will stop
working during spinning.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using process
5 Select water level
WATER LEVEL KNOB
Three water levels available according to the laundries quantity:
High; Medium; Low.
Page 8
WATER LEVEL
HIGH
After the water inlet as per the preset water level, in case
additional water quantity is required, please first set the button
to the "RESET", and perform automatic water inlet. When it
reaches the suitable water level, you can turn it to the preset
water level.
MEDIUM
RESET
LOW
After the water inlet under set water level, if higher water level is
needed, please first turn the knob to " Reset ", then turn back to
needed water level. The washing machine will fill water to the
new water level automaticly.
6 Press the POWER button
Using this button to switch on or off the power. When the power is on ,
the relevant indicator light will be lighted.
When the washing is over , it will switch off the power automatically.
7 Select program
Circumvolve this knob, the following programs can be
selected solely: wash, strong, stanard, gentle, spin
Mode and meaning of the indicator light
The frame of indicator is not lighted.
the frame of the indicator is flashing : indicate the running program.
the frame of the indicator is on : indicate the program about to run,
or indicate the selected mode
the frame of the indicator is flashing rapidly: indicate abnormal condition.
Paraphrase of the program
Program
Wash
the occasion
total time (min)
Just washing , the water can be usedrepeatedly.
Including soking, it is the same with the very dirty clothing.
About 6 not including inleting water
About70 not including inleting water
Strong
Standard The common washing
Gentle
About40 not including inleting water
About23 not including inleting water
Washing woolen textile or underwear
Spin
Only needing spining after washing with hands
About7 not including draining water
Download from Www.Somanuals.com. All Manuals Search And Download.
Using process
The method of the program indicator light
The indicator
light
Cycle
SOAK
WASH
STRONG
Only washing without draining water.
Soak Wash Rinse Spin
Wash Rinse Spin
Gentle Rinse Spin
Drain water only spin
Attention
Even there's no water in the tub, the spinning will
start after a certain period.
Do not use the "soak" program for the woollen
laundries.
Wash the laundries that are prone to lose colours
separately from other laundries.
To wash thin laundries such as the stocking, silks
etc., please put them into washing bag (which is
selectable part).
8 Push the "start/pause" button
After the power is switched on, push it to start the machine
During working, push it to pause working.
During pause, push it to resume working.
When in pause, the indicator light which is flashing will be light only.
Press the Start/Pause button, the indicator light will flash.
Attention: If you have pushed the Start/Pause button, you will select only during the
soaking or washing.
If you want to select during other cycle, you must switch off the power for
more than 3s, then switch on the power to select again.
It will drain water for set time only when there is water in the tub; if there is
no water in the tub, it will drain water for 10 seconds, then turn to the next cycle.
When running the rinsing cycle, it will rinse twice, but when rinsing in
the gentle cycle ,it will rinse only once.
9 The washing is finished
It beeps to indicate
the finishing of
washing
The power will be switched off automatically
after the finishing of the washing.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using process
10 Disposal after washing
After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise
it may influence your using the machine.
Please first pull off the power plug from the receptacle before cleaning.
The disposal of the lint filter
The lint filter must be used during washing.
It must be cleaned in time after each using
Dismantle the lint filter:
Same as fig 1 put hand in place,
then push it down to dismantle.
Clean the lint:
Filter lid
While the lint is wet, put it into water,
then clean it (same as fig 2 ).
Install the lint filter:
After cleaning the filter, insert the bottom
of the filter into the filter lid, then push the
top of the filter to install it(same as fig 3 ).
The filter screen of the water inlet valve is
likely to be blocked by foreign materials
and influence the water inlet. Please clean
it with brush every two months.
If the cabinet is dirty, wipe it with wet cloth
Do not flush it directly with water.
Wipe it with neutral detergent.
Do not wipe it with thinner, petrol,
alcohol etc.
l
tro
inner
Th
Pe
Alcohol
1.After washing, close the water faucet. ( If needed, you can dismantle the water inlet hose).
2.Do not store water in the washing machine for a long period. Drain the water completely
after each using.
3.Be sure to pull off the power plug before maintenance.
4.Hang up the power cord and drain hose.
5.Wipe off the water drops on the surface of the machine and inside the tub. Open the top lid
for some time (about 1 hour), then close the top lid.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting Answer to question
(If there's breakdown, please pull off the power plug before checking) The following phenomena
are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real
breakdowns, please come to the special maintenance department or after-sale service department
of our company. Do not repair it by yourself.
Phenomenan
The reason
How to settle
In rinsing, spinning, the
machine stops running.
(The indicator light flashing)
Close the top lid.
The top lid is not closed.
Put down the drain hose.
Is the drain hose put down?
There is still water after draining
for 5 minutes(the indicator light
of soak, wash, rinse, spin flashing).
Open and close the top lid once.
Clean the foreign material .
Open and close the top lid once.
Is the drain hose blocked by
foreign material?
Re-order the laundries. Close the top lid.
Level the machine in right position.
Open and close the top lid once.
The safety switch acts. The
spinning can not work ( the
rinse, spin light flashing)
Are the laundries put slantingly?
Is the machine slanting?
Open the water faucet.
It does not do water inlet or
the speed is slow ( the water
level is not reached after 20
minutes. The wash rinse is
flashing).
Is the water faucet open ?
Open and close the top lid once.
Clean the water inlet valve .
Open and close the top lid once.
Please use the machine after the
hydraulic pressure reached to the
rating.
Is the water inlet valve blocked?
Is the hydraulic pressure too low?.
Is there power failure?
Is the power plug loose?
Use it when the power is on.
Insert the power plug tightly.
Fill water to the preset level.
No washing
the machine
does not act
Does the water reaches the preset
level?
Is the power plug loose?
Insert the power plug tightly.
Close the top lid
Distribute the laundries evenly.
No spinning
Is the top lid closed?
Are the laundries Distributed
evenly?
Level the machine properly.
Is the machine slanting?
Are the laundries slanting in spinning?
There's abnormal sound inside
the machine.
Re-order the laundries. Close the top lid.
Is the jointer screw of the water inlet
hose loose or twisted awry?
Fasten the jointer screw properly.
The water faucet leaks.
Common phenomena
Phenomena
Explanation
Balance the laundries to avoid slanting.
The spinning is intermittent when it starts.
The program is setting the drain time. Some time is needed
before it starts spinning.
Select the SPIN program, but it doesn't work.
There may be some water flowing out of the drain hose in the first
use of the machine.
It is the water remained in the factory inspection of performance.
The reason is that the laundries leaning to one side,
so the safety switch acts. After inleting water, churning
up , the slant has been eliminated, then spinning again.
At the last spinning, it stops spinning, turns to rinse
and inlets water.
Download from Www.Somanuals.com. All Manuals Search And Download.
Packing list
Name
Storage position
Quantity
One
Inside the document bag
User's manual
Lint filter
One
Inside the document bag
Inside the accessory bag
Inside the accessory bag
One
One
Drain hose clamp
Components of the water
inlet hose
Outer drain hose
One
One
Inside the washing machine
Computerized Automatic
washing machine
Download from Www.Somanuals.com. All Manuals Search And Download.
Specification
Model
Rated voltage frequency
220V
50Hz
Water level/Water quantity (about)
High/95L Medium/72L Low/51L
Max water consumption
bout285L(highest water level; standard program)
n ection pressure
Rated washing power
Rated spinning power
Weight
Dimension
Rated washing capacity
Rated spinning capacity
Download from Www.Somanuals.com. All Manuals Search And Download.
|