Haier Washer HWMP75 918 User Manual

Automatic Washing Machine User manual  
This manual is for  
HWMP75-918  
Please read this manual  
carefully before using.  
Retain for future reference.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Product Overview  
Top lid  
Cold water inlet valve  
Hot water inlet valve  
Power cord  
Detergent box  
Bleach Inlet  
Balance  
ring  
Hook  
Pulsater  
Inner tub  
Handle  
Lint filter  
Lid Lock  
Back cover  
Control panel  
Drain connector  
Cabinet  
Base frame  
Adjustable leg  
Fixed leg  
(2 pieces)  
2pieces)  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety Precautions  
.
Do not block the ventilation holes with  
carpet. Ensure carpet does not  
obstruct the opening under the base  
of the cabinet.  
.
Front  
The ventilation  
holes at the bottom  
Back  
Bottom plate  
Soft object  
.
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety Precautions  
.
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation and Adjustment  
Please install and adjust the machine according to the directions contained  
in this manual. It is very important to follow these directions for the safe  
operation of the machine, and to ensure your machine operates correctly.  
Install the bottom plate  
The purpose of the bottom plate is to suppress noise  
from the washing machine during operation.  
Screw  
Steps:  
Front  
1. Lay the washer on its back, on a non-abrasive surface.  
2. Place the plate on to the bottom of the machine.  
3. Use a screwdriver to tighten the screw ( in accessory  
bag) securing the panel to bottom of the washer.  
4. Once the screw is tight and the panel is secure, return  
the washer to its standing position.  
Back  
Bottom plate  
Carpet  
Balance washing machine  
Do not install this machine on an incline greater than 2° . Installing machine on an  
angle or on rough ground will result in unstable running or stoppage of the  
machine. Please adjust it by the following method:  
1.Confirm it is level  
2.Lift up the side of the leg slightly and twist the adjustable leg.  
Note:The distance between the washing machine  
and wall:at least 20 mm.  
20mm  
20mm  
High  
Low  
Installation of drainage hose  
Install drainage hose  
First connect the drainage hose to the connection point on the lower  
right side of the cabinet, and fasten with drain hose clamp (provided).  
Connect drain hose guide on to the outside of drainage hose. To guide  
the drain hose over the tub or standpipe the hose guide MUST be fitted  
to the drain hose.  
Drain hose neck guide  
Drain hose  
clamp  
Drain hose joint  
Placement of Drainage Hose  
The height of the standpipe or tub should be between 850 - 1200 mm.  
To avoid syphoning, the drain hose should not extend more than 20 mm  
from the end of the guide.  
0.8m  
h
1.2m  
Ensure drainage hose is held in place to avoid leaks or spills.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation of water inlet hoses  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before washing  
Check if the Clear the pockets Tie any long  
laundry has ,and take out Straps or  
any special loose items such strings,fasten exceed the rated cause noise. To  
The weight of the When the machine is  
laundry shall not running, buttons may  
washing  
instructions. hairpins etc.  
as coins,sand,  
buttons and capacity of your  
close zippers. machine Loosen  
reduce the noise, turn  
clothes inside out or  
the laundry before place them in a laundry  
placing it evenly  
in the tub.  
bag.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Loading your laundry  
Detergent usage guide  
Adding washing power  
It is suggested to dissolve detergent before adding to  
the tub, see as below:  
1. Prepare warm water (<35 C) in a container.  
2. Add washing powder, stirring to dissolve it completely.  
How to use  
Bleach/whitener  
Close the lid  
During a washing program, the top lid will be activated.  
If you want to open the top lid, please press key “START/PAUSE” button, and the washing  
program will pause. The top lid will be unlocked and you can access your laundry.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation & Wash Cycles  
START  
PAUSE  
Hot/Cold  
Warm/Cold  
Cold/Cold  
Normal  
Heavy  
Memory  
Synthetic  
Long  
30 Min  
20 Min  
10 Min  
7
5
3
8
6
4
3
2
1
Rinses  
Rinses  
Rinse  
9
7
5
3
Min  
Min  
Min  
Min  
Minutes Remaining  
Medium  
Rapid  
Delicate  
Quick  
Wool  
Tub dry  
1
2
Delay(Hours)  
Express  
5
Min  
J
Temp  
Water  
Level  
Cycle  
Soak  
Wash  
Delay  
Rinse  
Spin  
I
Child  
Lock  
Lid  
Lock  
G
H
A
B
C
D
E
F
Indicator display  
Lid lock function  
During the washing program, the lid lock will continue to function even with the power off,  
and power plug removed from the wall socket.  
When the washing program is over please wait for the light of lid lock to go out before  
removing the power plug from the wall socket.  
If you want to cancel from lid lock function, press “START/PAUSE” button during the  
washing program.  
NOTE:  
In order to protect the washing machine, please don't try to open the top lid while the lid  
lock light is on.  
Child lock function  
The function is intended for children safety and preventing the washing program from  
accidental changes by children.  
Hold the Spin button and Delay button,then press the Power botton,the child lock light on,  
set desired washing procedures,After setting,press the Start/Pause button,the child lock is  
activatde,all of the buttons are locked and can not make selection.  
Release the child lock function:  
Press the Spin button and Delay button at the same time  
for more than 2 seconds.After three beep sound,the child lock function is released.  
Remaining time display  
Minutes Remaining  
Delay(Hours)  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation & Wash Cycles  
A
B “Soak”button  
“Memory/Synthetic/Heavy/Normal”  
press  
Soak  
The button is unavilable in the “Quick”and“Tub dry”cycles.  
For the “Wool” programs,press the Soak botton, choose or cancel soak process, but can't  
change the soak time.  
C/D/E  
F
G
2,4,6 or 8.  
8
2
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation & Wash Cycles  
H
than  
This cycle setting remembers the last soak,wash, rinse and spin  
settings(Water level will not be remembered as it is determined by  
fuzzy logic function).  
I
J
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation & Wash Cycles  
Button Operation and Descriptions  
1
2
Soak  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation & Wash Cycles  
The wash will finish in about 18 hours.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation & Wash Cycles  
Cycle completed  
When the machine has completed the  
selected/current wash cycle an audible  
alarm will sound and the machine will switch off  
automatically.  
Note:  
The energy test program was performed using the "Normal"  
cycle default setting of:  
Soak:"20"Min  
Wash: "Long"  
Rinse:1 Rinse  
Spin:7 Min  
Water level:8.  
Please use low suds/high efficiency detergent.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Maintenance  
Remove the power plug before carrying out any cleaning or maintenance.  
Clean the lint filter(s) and detergent box after each wash.  
Remove and clean the detergent  
box, replace after cleaning.  
The lint filter must be used during washing.  
It must be cleaned after each use  
Lint filter:  
1. Slide upwards to remove.  
2. Gently push it down to install;  
ensuring it is in place before  
next wash.  
Dismantle  
Install  
The filter screen of the water inlet valve If the cabinet is dirty, wipe it with a damp cloth.  
may become to be blocked by foreign  
materials and influence the water inlet.  
Please clean it with brush every two  
months.  
Do not wash directly with water.  
Wipe with a neutral detergent (please check  
directions on detergent bottle first).  
Do not wipe machine with thinners, petrol,  
alcohol or other harsh solvents.  
1. After washing cycle has finshed, turn off the water faucet. (If needed, you can  
remove the water inlet hose).  
2. Do not store water in the washing machine for a long period without completing  
a wash cycle. Drain the water completely after each wash.  
3. Hang up the power cord and drain hose.  
4. Wipe up any drops of water on the surface of the machine and inside the tub.  
Leave the lid open for about 1 hour after each wash to evaporate any residual  
water.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Trouble shooting  
If there is a fault or the machine does not operate correctly, remove the power plug before checking the  
machine. Using diagnostic list below, please check the machine requires repair. If a repair is required,  
please contact our Customer Care Team, do not try to fix it yourself.  
Problem  
Possible causes  
What to do  
The machine does not  
drain or drains slowly.  
The display shows E1.  
Is the drain hose blocked?  
Remove the blockage.  
Open and close the top  
lid once.  
The machine stops running.  
The display shows E2.  
The top lid is not closed.  
Close the top lid.  
The machine does not  
spin. The display shows  
E3.  
Has the laundry been  
place unevenly in the  
machine?  
Redistribute the load  
evenly,close the top lid.  
Level the machine. The  
machine will start 10  
seconds after being leveled  
correctly.  
Is the machine level?  
The display will show E4  
within 30 minutes.  
Is the water tap opened, or  
has the water supply been  
interupted?  
Open the water tap. Push  
the Start/Pause button once.  
Clean the water inlet valve  
then push the Start/Pause  
button once.  
Push the Start/Pause  
button once.  
Is the water inlet valve  
blocked?  
Is the water pressure too  
low?  
The display shows E6.  
The display shows E8.  
The water level sensor  
has failed.  
Please contact the after-sales  
service department.  
Lid lock fails to lock?  
Switch off the power,  
switch on again.  
Will not  
wash  
Is there a power failure?  
Is the power plug inserted  
tightly?  
Has the water level  
reached preset position?  
Wait for the power supply  
to be restored.  
The machine  
does not  
work.  
Insert the power plug  
tightly.  
Wait for water to fill to the  
preset level.  
Is the power plug inserted  
tightly?  
Is the top lid closed ?  
Is the laundry distributed  
unevenly in the machine?  
Insert the power plug  
tightly.  
Close the top lid.  
Redistribute the laundry.  
Will not  
spin  
There are abnormal  
sounds inside the  
machine  
Is the machine level?  
Redistribute the load  
Has the laundry been place  
unevenly in the machine?  
Are there any foreign  
evenly. Close the top lid.  
Level the machine.  
Remove the foreign object.  
objects inside the bowl?  
The water tap leaks  
Is the water inlet hose  
loose?  
Fasten the inlet hose.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Common occurrences  
Situation  
The spinning is intermittent  
when it starts.  
Cause  
Redistribute the load evenly.  
Close the top lid.  
The wash procedure pauses.  
The cloth sensor is detecting, it will add  
water after about 48 seconds.  
Select spin program,  
but it does not work.  
A period of time is needed before  
the spin program starts.  
There maybe water in the  
drain hose in when first used.  
It is the water remaining after the  
performance inspection by the factory.  
.
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Packing list  
Name  
Quantity  
Storage position  
Automatic washing  
machine  
One  
Bottom plate  
One  
Between the upper cushion of the  
washing machine package and the  
upper seal of the package carton  
User manual  
One  
One  
Inside the document bag  
Inside the document bag  
Warranty card  
Tapping screw  
One  
Two  
Inside the accessory bag  
Inside the accessory bag  
Components of the  
water inlet hose  
Connect to the  
washing machine  
Connect  
to the tap  
Drain hose  
One  
One  
One  
Inside the accessory bag  
Inside the accessory bag  
Inside the accessory bag  
Drain hose guide  
Drain hose clamp  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
HWMP75-918  
400W  
360W  
46  
54  
L 610 W 620 H 995  
1/24L 2/34L 3/44L 4/52L  
5/60L 6/68L 7/76L 8/85L  
Note Default settings when you choose this program after power on  
Water  
level  
Item  
Time  
Spin  
Temp  
Rinse  
Soak  
Wash  
Cycle  
106Min  
8
20min Long  
7 Min  
1 Rinse  
Normal  
Heavy  
Warm/Cold  
Warm/Cold  
Medium  
6
6
/
/
/
7 Min  
5 Min  
5 Min  
2 Rinses  
2 Rinses  
57Min  
Rapid  
Warm/Cold  
Warm/Cold  
Delicate  
Quick  
46Min  
Express  
10 Min  
2
1 Rinse  
Memory  
Synthetic  
Wool  
This cycle setting remembers the last soak,wash,rinse and spin settings.  
/
6
/
/
/
Medium 1 Rinse  
Express 2 Rinse  
5 Min  
Warm/Cold  
Cold/Cold  
/
6
34Min  
54Min  
5 Min  
/
/
/
/
Tub dry  
18  
Part No.0030810251  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Graco Heat Pump 12 VDC User Manual
GSW Water Heater 73992 User Manual
Haier Air Conditioner hsu 71hek03 r2db 0 User Manual
Haier Flat Panel Television LE39M7000CF User Manual
Harbor Freight Tools Utility Trailer 90154 User Manual
Harman Kardon DVD Player DVD 506 User Manual
HP Hewlett Packard Personal Computer dv9500 User Manual
Huawei Refrigerator ME909u 521 User Manual
Hyundai DVD Player H DVD5008 N User Manual
iHome Clock iH41 User Manual