Automatic Drum Washing Machine
HK1600TXVE/ME
HK1400TXVE/ME
HK1200TXVE/ME
HK1000TXVE/ME
HK800TXVE/ME
Table of Contents
Before using the appliance
Name of parts...inside front cover
Matters needing attention......1-3
Installation.............................4-5
Function ...............................6-7
How to operate the wasing machine
Program description table........8
Preparation .............................9
Washing Procedure ..........10-11
Maintenance
Maintenance ..........................12
Troubleshooting Guide ..........13
Technical Specifications ........14
Wiring Circuit .........................15
Download from Www.Somanuals.com. All Manuals Search And Download.
Matters Needing Attention
ƽ Safety
2. Hold the plug and not the electric cable when
ꢀꢁ
.A separate earthed socket is required for the
unplugging the washing machine. If washing
machine is supplied from a cord extension set or
electrical portable outlet device, no cord
extension set or electric portable outlet device
should be positioned so it is not subject to
splashing or ingress of moisture.
power supply. The washing machine must be
positioned so that the plug is accessible.
4. Do not touch or use the washing machine bare-
footed or when the hands or feet are wet.
3.Fuses in the power circuit should be rated for 15A.
If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
5.Do not use flammable detergent or dry clean 6. The door of the washing machine will become hot
ing agent; do not use flammable spray in close
vicinity to the washing machine; do not remove
or insert the plug in the presence of flammable
gas.
during the heating process. Avoid contact with the
door during the heating process. For safety, keep
children away from the washing machine.
Keep children away from the packing materials after unpacked. The appliance is not
instruct for use of young children of infirm persons without supervision. Young children
should be supervised to ensure that they do not play with the appliance.
ꢂꢁ
ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Matters Needing Attention
8.The washing machine should not be installed 9. The carpet must not obstruct the ventilation
Wiring Circuit
HK1600TXVE/ME HK1400TXVE/ME
L
N
outdoors or in a damp place. In the event of water
leakage or splashes allow the machine to dry
naturally.
openings in the base of the washing machine.
Power Switch
ST-1
ST-2
ST-3
ST-4
ST-5
ST-6
ST-7
ST-8
ST-9
O1
J12-3
Display PCB
O2
D1
J12-4
J12-11
Door Lock
D2
J12-12
N1
N2
D3
J12-1
J12-2
J12-4
Adjustable Thermostat
Drain Pump
Power Drive PCB
B1
M1
P1
P2
J12-11
J12-5
M
G
M2B2
M3
B3
VH2
B4
M4
VH1
V1
J12-7
J12-8
J12-9
B5
Economic Wash Switch
11.During installation, ensure that the electric
cable is not trapped by the washing machine
and avoid damage to the electric cable.
M5
10.Keep away from heat sources and direct sunlight
to prevent plastic and rubber components from
aging.
V2
Motor
B6
M6
B7
M7
M8B8
B9
M9
L2
L1
L3
H2
Heating Element
H1
Pressure Switch
HK1200TXVE/ME HK1000TXVE/ME HK800TXVE/ME
L
N
Power Switch
Door Lock
During Use
ST-1
ST-2
ST-3
ST-4
ST-5
ST-6
ST-7
ST-8
ST-9
Display PCB
1. Before use, check the joints of the filling hose,
the tap and the drainage hose for possible
problems from water pressure fluctuations.
If joints are loose or there is leakage, turn
off the tap and repair. Do not use the washing
machine until the hoses are properly fixed.
Use the new hose and the old hose should
not be reused
Keep the door slightly open when the washing
machine is not in use to prevent formation of
odors; do not cover the washing machine with
plastic cover so that inside dampness cannot
be kept in.
2.
O1
J12-3
O2
D1
J12-4
J12-11
D2
D3
J12-12
J12-4
B1
N1
N2
J12-1
J12-2
Adjustable Thermostat
Drain Pump
M1
Power Drive PCB
P1
P2
J12-11
J12-5
M
G
M2B2
M3
B3
VH2
Motor
VH1
V1
J12-7
J12-8
J12-9
B4
M4
Economic Wash Switch
V2
M5B5
B6
M6
L2
L1
L3
H2
H1
Heating Element
Pressure Switch
2
Use the new hose and the old hose should not be reused
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Matters Needing Attention
Technical Specifications
Model HK1600TXVE/ME
HK1400TXVE/ME HK1200TXVE/ME HK1000TXVE/ME
HK800TXVE/ME
220V-230V/(50Hz)
3. Do not place heavy, heating source or wet articles
on the top of the washing machine.
4. Do not hot wash foam rubber or sponge-like
materials.
220V-230V/(50Hz) 220V-230V/(50Hz) 220V-230V/(50Hz) 220V-230V/(50Hz)
Power supply
Power(Max)
700
<
<
<
0.05
P
1
<
0.05
P
1
<
<
<
<
1
0.05
P
1
0.05
P
<
1
Water pressure (MPa)
Washing power(W)
<
0.05
P
240
180
700
180
700
240
480
240
480
6
Spinning power(W)
wash load (kg)
480
6
6
6
6
800
Spinning speed (MAX) (r/min)
Wash program
1600
9
1400
9
1200
9
1000
5. Before washing, do up zippers, buttons and clothes
straps and put small articles, such as socks, laces
or bras, into a washing bag or a pillow.
6. Do not open the detergent distribution drawer
during the wash cycle..
9
9
1800
Heating power (W)
Weight (kg)
1700
86
1800
86
1700
86
1800
86
86
Anti-Electric Shock
Anti-Water Class
I
I
I
I
I
Steel wires in bras will pop
out during washing; never
wash bras containing steel
wires.
IPX4
IPX4
IPX4
IPX4
IPX4
The European Standards can be met when default settings for intensive wash of
cotton fabrics at the maximum speed are selected.
AAA(HK1600TXVE/ME)
AAB(HK1200TXVE/ME)
AAD(HK800TXVE/ME)
AAB(HK1400TXVE/ME)
AAC(HK1000TXVE/ME)
8. After each wash program, turn off the tap to prevent
leakage; and unplug the washing machine and
wipe clean the lower part of the porthole.
7. The door is fitted with a self-lock device and will not
open until 2~3 minutes after the washing machine
stops. Do not force the door open. Do not open the
door if water level can reach the porthole.
ꢄ
ꢀꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Troubleshooting
ƽ
Remove all the packing materials (including the
The following circumstances do not constitute problems. Do not contact the maintenance service
until the problem has been confirmed.
foam base)to prevent vibration during use, as
shown in Fig.1.Upon opening of the package,
water drops may be seen on the plastic bag and
the porthole. This is normal phenomenon resulting
from water test in the factory.
Problem
Possible cause
Fig. 1
Poor connection to power supply
Power failure
The washing machine fails to operate
ƽ
Door is not properly closed (It will show E1)
Machine has not been switched on
Check attachments and materials with reference to the following
Name
Operation
manual
Water
hose
Drainage Plastic
Quality
Qty
holder
plugs
certificate
Water tap is not turned on(It will show E5)
Water pressure is less than 0.05Mpa
The inlet hose is kinked
Model
Washing machine cannot be filled
with water
HK1600TXVE/ME
HK1400TXVE/ME
1
1
1
1
4
Water supply failure
1
1
1
1
The program dial is not properly set
The door is not properly closed
The inlet hose filter is blocked
HK1200TXVE/ME
HK1000TXVE/ME
HK800TXVE/ME
3
The height of the drainage hose is below 80cm (it
should be within 80-100cm)
The drainage hose end is in water
The machine is draining while is
being filled
ƽ
Dismantle the packing bolts as shown in Fig. 2.
The packing bolts are designed for clamping anti-vibration components
inside of the washing machine during the transportation process.
Beforeuse:
1. Remove the back plate;
2. Remove the three packing bolts on the back plate and take out the
rubber hose;
Drainage hose is blocked (It will show E2)
Drainage hose end is below 100cm above the floor
Drainage failure
level
The filter is blocked
Not all packing bolts have been removed
3. Replace the back plate;
Washing machine is located on an uneven surface
Machine load is over 6kg.
Not all foam packing has been removed from the motor
Strong vibration during spin drying
4. Fill the holes left by the packing bolts with plastic plugs.
(Attention: The packing bolts and rubber hose should be kept in a safe
place for later use)
Operation stops before completion
of a wash cycle
Water or electricity failure
Washing machine is in soak cycle
Fig.2
Fig.3
ƽ
Adjusting the washing machine
Washing machine is in soak cycle
Operation stops for a period of time
Washing machine gives an error message.
There are adjustable feet under the bottom of the washing machine. Before
use, the washing machine should be adjusted, as shown in Fig. 3, so that it
is level.
Excessive foam in the drum, which
spilled to the distribution drawer
The detergent is not a low-foaming type or for manual
wash
Excessive use of detergent
13
4
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Clean the filter Cleaning methods (once a month)
1) Push out the outer cover (Fig. 1);
2)Screw out filter by turning counterclockwise (Fig. 2);
3) Flash clean with running water;
4) Replace the filter by turning clockwise and remount the
cover.
Caution: The filter must be in place, or it may lead to
leakage.
Fig1
Fig2
Fig3
12
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Hints for Saving Energy
Operational Functions
.
4. Setting washing temperature
Speed
Load
Tamp
Press the temperature button until "_ _ oC" is displayed if heating is not needed; otherwise, select
an appropriate temperature as required (refer to the "Guide to Operational Program Selection").
/
Easy lroning Delay Timer Prewash Extra Rinse
6Kg Wash
ON/OFF
5. Function selecting button
/
Select functions as required (refer to the "Operational Functions" section).
$ꢆIroning-free button
Press this button, the
reduce wrinkles.
laundry will be fluffed
6. Washing
up at the end of the
spinning cycle to
Press the Start / Pause button, the indicator at the upper left corner of the button will blink
and the washing machine starts operation.
B:Delay button
Press the Delay button before the program is started if necessary. Each press of the Delay
button, the delay time will increase one hour (the regulating range is from the current setting
to 24 hours). After the delay time is changed, press the Start button to activate the delay
function.
Note: The delay time must be longer than the program time; otherwise, the washing machine
will start the wash program directly.
7. Finish
The washing machine will stop operation automatically when a wash cycle ends. The "End" sign will
appear. Open the door and take out the laundry. Then turn off the tap and unplug the power cable.
C:Pre-wash button
Press this button, the washing machine will automatically start a prewash cycle during
execution of a washing program.
ƽ
Hints for saving energy
D: Extra rinsing button
Press this button, the washing machine will run andditional rinsing cycle to further clean your
clothes.
During operation
1. Collect clothes for one full wash load.
2. Do not overload the washing machine.
3. Pre-wash heavily soiled clothes.
E: 6kg button
Press this button, the 6kg washing mode will be activated.(Only used in cotton and synthetic
program)
4. Reduce the amount of detergent or choose standard or delicate wash
programs for slightly soiled clothes.
F: Washing load button
5. Choose a proper washing temperature. Only exceed 60Ɔ for heavily
soiled clothes.
6. Do not use more detergent than required.
7. Softening agent makes clothes feel softer and easier to iron.
Press this button, 3 load levels of "ϔϔϔϔ" (0-1.5kg), "ѠѠѠѠ" (1.5-3kg) and "ϝϝϝϝ"
(3-5kg) will appear on the screen for manual selection before water is filled. After the load is
set, the water content will be automatically adjusted.
G: Power button
Press this button to switch on the washing machine; press it again to switch the machine off.
ꢅ
ꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Functions
Washing Procedure
H: Wash programming knob and start button
By turning the knob clockwise or counterclockwise, the required program can be selected;
press the start button to start a program; press it again to pause
1. Loading
Open the door, put in the laundry piece by piece.
Close the door tightly.
Load Reference
ꢇƽꢇ-HDQVꢇ
ꢈꢉꢊꢊJꢋ
Notes: 1) When first using the washing
machine,let it run unloaded for one program
to preventthe laundry from being tainted by
oil or dirty water from the washing machine.
2) Do not overload the washing
machine.
I: Speed button
ƽ
(cotton appr 950g)
Overalls
ƽ Pajamas
Press this button to set a required spinning speed, which covers 0 rpm to 1600 rpm.
( 0-800rpm for HK800TXVE/ME 0-1000rpm for HK1200TXVE/ME 0-1200rpm for
HK1200TXVE/ME 0-1400rpm for HK1400TXVE/ME 0-1600rpm for HK1600TXVE/ME)
(appr 200g)
ƽBlended fabric
clothes
(appr 800g)
ƽ Shirts
(appr 300g)
ƽ
T-shirt
ƽ
Underwear
(cotton
J : Temperature button
Press this button to set a required temperature. The selectable temperature range is
0-90Ɔ. (Some programs have temperature limits. Refer to the programming guide)
appr 300g)
(blended fabrics appr 70g)
ƽ Socks (blended
fabrics appr 50g)
ƽ Jackets (cotton
appr 800g)
ƽ Single bed sheets
(cotton appr 800g)
ƽ Woolen
blankets
(appr 3000)
K: Display
Remaining time, set temperature, spinning speed, other function information, and error messages
are displayed. Refer to the Display Description
2. Adding detergent
Slide out the detergent drawer and put the required detergent and
softening agent into the corresponding boxes. Push back the drawer gently.
Caution:
/ꢆDetergent distribution drawer
ꢂ
There are instructions on the handle of the distribution drawer. Swing
out the drawer, three compartments can be seen.
ꢀ
ꢇ
Compartment 1: Pre-washing detergent. If pre-wash is not selected, do
ꢁ
not add detergent.
Compartment 2: Detergent for all washing programs. Detergent must be
added whetherpre-wash is selected or not.
1) For pre-washing program, detergent should be added to both
compartments 1 and 2. Compartment 2 allows only solid detergents.
For other programs, do not add detergent to compartment 1.
2) Do not overuse softener; otherwise, it will damage the artificial
fibers. Refer to the instructions during use.
Compartment 3: Softening agent, conditioning agent, perfume, etc
B+C: combination for keyboard lock
After a program is started, press the delay button and the Prewash button at the same
time for 3 seconds, the keyboard will be locked and "SAFE ON" will appear on the screen.
Press the two buttons again for 3 seconds, the keyboard willbe unlocked and "SAFE OFF"
will be displayed. This function is used to protect the washing machine from being disturbed
during operation, such as accidental press of buttons or turning of knobs by children, as this
may affect or suspend the operation of a program. Note: If this function is activated during
a washing cycle, be sure to inactivate it af the end of the cycle when the "End" sign is
displayed.
3. Selecting washing program
To get the best washing effect, an appropriate washing program should be selected
accord-ing to the laundry type.
Note: The above operations refer to conditions without power-off memory. Or the washing
machine will continue operation from where the program was broken. To clear memory,
press the Start/Pause button. Turn off the power for a few seconds and turn on again, all
the settings will be renewed.
Caution: If the keyboard lock is not activated, press the Start/Pause button and then cut off
the power, the suspended program will be canceled after power is resumed. Now turn the
program knob to reselect.
ꢂ
ꢀꢊ
Download from Www.Somanuals.com. All Manuals Search And Download.
Program Description Table
Preparation
Detergent
1.Power supply
Plug in the power supply 220-230V~50HZ
2.Water supply
Program Time
(At Max
Mode Selection
Recommended
Laundry
Selectable
Turn on the tap ensure that the water in clear.
Caution:Before staring the washing machine turn on the water
faucet to ensure the water faucet and the water inlet hose are
connected correctly and do not leak
Temperature
Temperature)
3
2
1
Button Position
Program
Intense
Heavy and
thick fabrics
2:26
ć
0-90
ƾ
ƾ
Cotton
White fabrics
1:41
ć
0-90
Normal
4.Detergent selection
3.Laundry treatment
Fast-color and
medium soil
fabrics
Delicate
ƾ
1:25
Sort out clothes according to type and extent of dirt.There are
Only special low foam detergent should
be used in automatic drum washing
mashine,form blended or wool fabrics
special deter-gent should ne used.dry
clearning solvent should not be used
such as trichhloroethy-lene or alike
(caution :load the required amount of
detergent only).
0-60
0-60
three types of clothes:cotton,synthetical and woolen (silk) fabrics.
Separate white clothes from colored.If whites and coloreds
are combimed for one load,make sure the coloreds are colorfast
Synthetic
Fast-color
and heavy-
soil fabrics
Normal
wash
ƾ
ƾ
0:58
ć
0-40
Cashmere Wool and silk
0:49
0:46
0
-Clothing with frayed edges or yams should be put in a wash
bag or special bag before washing
-repair damged clothing,lose buttons or damaged zips
and hooks before washing.
-Bed sheets and table ware should be loosely loaded and not
folded.
Delicate
/Super
Quick
ć
0-40
ƾ
ƾ
Wool
Wool
Wash
Medium-soil
cotton &
synthetics
Super
quick wash
0:29
ć
0-40
This washing mashine is for househould use and designed
for mechanically washable clothes.When washing,separate
unwashable clothes with reference to clothes labels.
Rinse
0:32
0:11
Single
Wash
Program
Spin dry
5.Wash Load
Woolen fabrics
2kg
non-fade cottens
Type
Delicate fabrics
3kg
Note :" " indicates that softener or bleacher can be added if needed;
" ƾ " indicates that detergent must be added;
Load
5kg
" X " indicates that detergent must not be added.
If pre-wash is selected,must add detergent in Compartment 1.
ꢌ
ꢉ
Download from Www.Somanuals.com. All Manuals Search And Download.
|