HBS82-880
HBS82-880
Automatic Drum Washing Machine
Table of Contents
Before using
Names of Parts--------------inside front cover
Matters Needing Attention--------------------1-3
Installation----------------------------------------4-5
Control Panel---------------------------------------6
Operational Functions------------------------6-7
During using
Program Selection--------------------------------8
Preparation-----------------------------------------9
Washing Methods---------------------------10-11
Maintenance
Maintenance -------------------------------------12
Trouble Shooting--------------------------------13
Technical Specification---- --------------------14
Wiring Circuit-------------------------------------15
0020503555
Download from Www.Somanuals.com. All Manuals Search And Download.
Matters Needing Attention
Safety
1. A separate earthed socket is required for the
power supply. After installation of the washing
machine,the power plug should be accessible
during the normal wash.
2. Hold the plug and not the electric cable when
unplugging the washing machine.
3. Fuses in the power circuit should be rated
for 15A. Refer to a washing machine techni-
cian or a Haier designated service point for
power cable replacement.
4. For your safety, dry hands before touching
the washing machine and wear appropriate
footwear .
5. Do not use flammable detergent or dry clean-
ing agent; do not use flammable spray in close
vicinity to the washing machine; do not remove
or insert the plug in the presence of flammable
gas.
6. The door of the washing machine will be-
come hot during the water heating process.
Avoid contact with the door during the heating
process. For safety, keep children away from
the washing machine.
7. Do not allow children play with the packing materials after unpacking.
1
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Matters Needing Attention
9. The washing machine should be place in
a well ventilated area maintaing a space
between walls or furniture.
8. The washing machine must not be used in
the open or in area of high moisture as water
droplets may form on electrical components,
Air dry the appliance if the washing machine
components become wet.
10. Keep away from heat sources and direct
sunlight to prevent plastic and rubber com-
ponents from aging.
11. During installation, ensure that the elec-
tric cable is not trapped by the washing ma-
chine and avoid damage to the electric
cable.
Use
2. After turning the power off, turn the pro-
gram knob clockwise to set washing
program.
1. Make sure that the washing machine is
securely connected to the water supply,
take the necessory precautions or con-
tact the local service center if the con-
nection is poor or there is a water
leakage.
2
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Matters Needing Attention
4. Do not wash foam rubber or similar
sponge materials.
3. Never place heavy objects ,a heating
applianceor a water container on the top
panel of the washing machine.
5. Before washing, do up zippers, buttons ,laces
and repair damaged areas,underwear or small
articals should be placed in the laundry bag
or a pillowslip.
6. Do not open the detergent box during
the wash cycle.
Do not wash clothes containing wire frames.
8. After washing, turn off the tap to prevent
leakage; unplug the washing machine and
wipe clean the lower part of the port hole.
7. The door is fitted with a self-lock device
and will not open until 2~3 minutes after
the washing machine stops. Do not force
the door open. Do not open the door when
water level reaches the port hole.
9. Keep the door slightly open when the washing machine is not being used. Never cover
the machine with a plastic sheet.
3
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
As shown in figure1 remove all the packing materials
(including the foam base).
Fig 1
Remove the packing screws as shown in figure 2.
The packing bolts protect the appliance from shock during
transportation The steps below should be followed before
using the appliance,
1. Remove the rear panel of the washing machine;
2. remove the three packing bolts from the rear panel of the
washing machine,the rubber hose and then the shock ab-
sorption channel steel;
3. reinstall the back plate;
4. fill the holes left by the packing bolts with plastic plugs.
(Attention: the packing bolts and rubber hose should be kept
in a safe place for later use)
Fig 2
Adjusting the position of the washing machine .There are
adjustable feet under the bottom of the washing machine. Be-
fore use, the washing machine should be adjusted, as shown in
figure 3, so that it is level.
Fig 3
4
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Connection of water inlet hose and washing machine
water inlet hose nut
1. Place the water inlet hose nut on the connector
of the water inlet valve.
2. slightly shake the water inlet hose nut to see if
it is tightly and properly fixed.
connector of water inlet valve
Water drainage hose
The height of the terminal of the water drainage hose should
be between 80cm-100cm, the water drainage hose must be
securely placed on the clip on the back of the washing machine.
Use the water drainage support supplied as an accessory
for proper installation of the water drainage hose .fix the water
drainage hose support with waterproof sring.Do not use an
excessively long water drainage hose and contract the autho-
rized technician if the water drainage hose needs to be
extended.the water drainage hose should not be extended
more than250cm.(longer extension will result in concurrent
water inflow and outflow).The diameter of the extension hose
should be the same as the original hose.
caution:water drainage hose must not be immersed in water.
the original and extension hoses should be tightly connected .
Connection of power supply
Check the following items before connection to the power supply.
The socket conforms to the maximun power load(The maximum current load of the
socket and power supply cable should not be less than 15A).
Power supply voltage conforms to the required value.
The power supply socket and the plug of the washing machine compatible,if they are
compatible ,Refer to a washing machine technician or a Haier designated service point
for power cable replacement.The washing machine should be connected to an earth
before use.
Supplementary earth cable should not be necessary if the socket is connected to the
earth.
Supplementary earth cable should be installed on the upper back of the washing
machine andconnected to an earth if the power supply socket has no earth connection.
5
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Control Panel
D E
D E
F
F
C
C
B
B
G
G
A
A
A Washing program
Turn the knob clockwise to set the desired wash program .
Caution: Turn off the power and turn the program knob clockwise
for setting desired wash program.
B Washing temperature
Turn the knob clockwise to set the desired temperature.
Temperatures between 30OC-90OC can be setted , Cold wash is se-
lected when the knob is set at *.
C Detergent distributor
Program discription are printed on the handle of the detergent
distributor,there are three detergent compartments numbered 1,2,3
Box 1: Pre-washing detergent
4
4
Box 2: Standard washing - extra-fast washing
Box 3: Softening agent, adjusting agent, perfume
2
2
1
1
3
3
Besides, there is a separate bleaching powder box 4. In case of
bleaching, put this box into compartment 1; remove this box from
compartment 1 if pre-washing is chosen. If bleaching is required,
place box 4 after the pre-washing is finished.
6
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Operational Functions
D No spin button
When this button is pressed, the spin cycle will be spared but water
drain is still available. This function is useful for hard ironing fabrics,
such as chemical fiber and wool fabrics.
E Economic wash button
Pressing this button will reduce the consumption of water during
bleaching under intense wash. It is recommended that this
program be used when doing a small laundry load.
Do not forget to reduce the amount of detergent used.
F Power button
ON
ON
Press the button ,washing machine will working;release the button,
the washing machine will stop.
OFF
OFF
G Power light
The light will illuminates when the power supply is connected.
7
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Program Selection
15
20
20
45
22.5
5
12.5
5
10
5
25
10
7.5
7.5
25
10
7.5
7.5
NOTE: “o”means softener liquid detergent canbe added when necessary. “ ”means detergent can
be added when necessary. “ ”means no detergent can be added.
x
8
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation
2. Water supply
1. Power supply
Plug in the power supply
220V~/50Hz.
Turn on the tap ensure that the water is clear.
Caution: Before staring the washing machine turn on the
water faucrt to ensure that the water faucet and the water
inlet hose are connected correctly and do not leak.
4. Detergent selection
Only special low foam detergent
should be used in automatic drum
washing machine, form blended or
wool fabrics special detergent
should be used. dry cleaning solvent
should not be used such as
trichhloroethylene or alike (caution :
load the required amount of deter-
gent only).
3. Laundry treament
sort out clothes according to type and extent of dirt.
There are three types of clothes: cotton, synthetical and
woolen (silk) fabrics.
separate white clothes from colored. If whites and
coloreds are combined for one load, make sure the
coloreds are colorfast.
-Remove all objects from pockets that may cause dam-
age to the machine, such as keys and coins.
-Clothing with frayed edges or yarns should be put in a
wash bag or special bag before washing.
-Repaire damaged clothing,lose buttons or damaged zips
and hooks before washing.
-Bed sheets and table ware should be loosely loaded
and not folded.
This washing machine is for household use and de-
signed for mechanically washable clothes. When
washing, separate unwashable clothes with reference to
clothes labels.
9
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Washing Methods
1. Laundry loading
Reference loading
Overalls
(cotton 950g)
Jeans (800g)
Pajamas (200g)
Evenly load the laundry in the washing
machine and then tightly close the door
of the washing machine
Note: 1) When first using the washing ma-
chine, let it run unloaded for one program
to prevent the laundry from being tainted
by oil or dirty water from the washing ma-
chine. 2) Do not overload the washing ma-
chine.
Blended
fabric clothes
(800g)
Shirts (300g)
Underwear
(blended fabrics 70g)
shirt
(cotton
300g)
Socks
(blended fabrics 50g)
Single bed sheets
(cotton 800g)
Jackets
(cotton 800g)
Woolen
blankets (3000g)
2. Use of detergent
Pull out the detergent drawer, put required detergent, softening
agent and bleaching agent into the corresponding boxes. Push
back the drawer gently.
Caution: 1) Do not add liquid detergent into box 1 and 2
2) For pre-washing program, detergent should
be added to both box 1 and 2; for other
programs, do not add detergent to box 1
3) Do not overuse softening agent as this may
damage artificial fabrics.
3. Washing program setting
Set the wash program correctly in accordance with the laundry load.the methods for set-
ting wash programs are indicated on the handle of the distributor on the washing machine.
turn the program knob clockwise to the desired program.
Caution: Turn off the power before setting the wash program.
10
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Washing Methods
4. Washing temperature Setting
Set the washing temperature as required, otherwise, set at position * when heating is not
needed.
5. Selecting the function button
Select function buttons as required (refer to the directions printed on the operation
panel) ,otherwise keep all the button released.
6. Washing
Press the power button and the washing machine will automatically commence
the programmed washing process.
7. End
Wait 2-3 minutes after the washing process is finished, press the power button again to cut off
the power supply. Open the door to take out the laundry. Turn off the tap and unplug the
washing machine.
Additional information
Energy and water saving during wash process
1. Collect clothes for one full wash load.
2. Do not overload the washing machine.
3. Pre-wash heavily soiled clothes.
4. Reduce the amount of detergent or choose fast or minimal washing programs for lightly
soiled clothes dirty.
5. Choose a proper washing temperature. Only exceed 60 OC for heavily soiled clothes.
6. Do not use more detergent than required.
7. Softening agent makes clothes feel softer and easier to iron.
11
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
2. Unplug the machine during cleaning and
maintenance. Use a soft cloth dampened with
soapy liquid to clean the machine case and rub-
ber components. Do not use corrosive or abra-
sive chemicals or solvents.
1. Turn of the water and electricity supply
after every wash. Open the door to pre-
vent the formation of moisture and odors.
If the washing machine is left idle for a
long period, drain any remaining water in
the machine and replace the drainage
hose.
3. Clean the detergent compartment
regularly. For the detergent compartment
similar to figure (a), raise the compartment
slightly to remove and replace after cleaning.
4. Cleaning the Filter (once a month)
Press the lower edge of the filter compartment
cover to open; (Fig1-2)
Remove the filter by turning counterclockwise;
(Fig3)
Flash clean with running water;
Filter replacement is the reverse of removal. Cau-
tion: Attention shall be paid to ensure that the fil-
ter is replaced correctly to avoid possible leakage.
Fig (a)
fig.1
fig.2
fig.3
6. If the machine is to be moved a distance location,
replace the vibration mounting locks which were re-
moved during installation as shown below.
5. To prevent block-
ages to the water sup-
ply or the ingress of
contaminants, clean
the water inlet and in-
l e t w a t e r f i l t e r
regularly.
Replace the rubber
plugs.
Remove the
back cover.
Insert the bolts.
7. If the washing machine is left idle
for a long period turn off the water
and electricity supply and open the
door slightly to prevent the formation
of moisture and odors.
Replace the back
cover.
Tighten the bolts with the
spanner provided.
12
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Trouble shooting
The following circumstances do not constitute problems. Do not contact the main-
tenance service until the problem has been confirmed.
Problem
Possible Cause
Poor connection to power supply
Power failure
Door is not properly closed
Machine has not been switched on
The washing machine fails to operate
Water is not turned on
Water pressure is less than 0.05MPa
The inlet hose is kinked
Water supply failure
Washing machine does not fill
with water
The program knob is not properly set
The door is not properly closed
The water supply and
drainage do not stop
Check that the height of the water hose is below
80cm
Drainage hose is blocked
Drainage hose end is below 100cm above the
floor level
Drainage failure
Some packing fixing bolts removed
Washing machine on a uneven surface
Strong vibration during spin
Operation stops before completion
of the wash cycle
Water or electricity failure
The detergent is not a low foam type
Excessive detergent has been used
Excessive foam in the drum
13
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical Specification
Model
HBS82-880
HBS82-880
Item
220V~/50Hz
10
Power supply
Maximum working current
(A)
0.05
330
650
15
P
1
Water pressure
Washing power
(MPa)
(W)
Spinning power
(W)
Washing program
Heating power
Size (HXDXW)
Weight
1950
(W)
(mm)
(kg)
850x550x595
72
14
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Wiring Circuit
I1: Power Switch
EVC,EVP,EVL: Water valve
P1,P2: Pressure Switch
THR: Adjustable Thermastat
D: Drain Pump
I2: Economic wash Switch
I3: No spin Switch
MR: Door Lock
TM: Timer motor
MC,ML: Motor
H:Heating Element
C: Capacitance
I3: No spin Switch
I2: Economic wash
Switch
15
15
Download from Www.Somanuals.com. All Manuals Search And Download.
|