34F9K
COLOUR TV RECEIVER
OWNER'S MANUAL
Haier & Higher
Please read this manual carefully before using this
TV set and keep it for future reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and cautions
4. Do not place the TV set near rain or
moisture as it may cause an electric
shock, or the TV set to catch fire. The
TVsetmustonly
beusedindryin
door locations.
1 When you clean the TV set, please
pull out the power plug from AC outlet.
Don't clean the cabinet and the
screen with benzene, petrol and other
chemicals.
5. The back cover must only be
removed by a registered electrical
service person. Removing the back
cover may result in electric shock, fire
or damage to
2 In order to prolong the using life of
the TV set, please place it on a
ventilatedplace.
the TV set.
6. If the TV set is not going to be used
for a long time, or there is a severe
thunder & Lighting storm, it is
recommended that the TV set be
disconnected from the AC power outlet
and the aerial plug removed.
3 Don't place the
TV set in the
sunshine or near
heatsource.
Explanation on the display tube
In general, it is not needed to clean the tube surface. However, necessary,
it's surface can be cleaned with a dry cotton cloth after cutting off the power.
Don't use any cleanser. If using hard cloth, the tube surface will be damaged.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Antenna connection
Generally speaking, to enjoy a clearer picture, we recommend that you use a CATV
system or an outdoor antenna .In different places, the suitable antenna type and position
are different.
300 twin-lead cable
Antenna adapter
(additional purchase)
75 coaxial cable
Note
It is recommended that you'd better use 75 coaxial cable to remove the
disturbance caused by airwave.
Don't bind antenna cable and power wire together.
Preparation of the remote control unit
Battery installation
Take off the battery compartment cover. Place two AAbatteries, make sure that battery
polarity matches with the +/- mark inside the battery compartment.
Operation notes for the remote control unit
Under normal conditions, the life time of batteries is one year.
If you don't intend to use the unit for a long period or the electricity of the batteries is
used up, remove the batteries to prevent batteries acid from leaking into the battery
compartment.
Don't throw your batteries into a fire. Dispose of your batteries with a specified method.
Avoid the falling and the wetting of the remote control unit.
Download from Www.Somanuals.com. All Manuals Search And Download.
Function buttons and external sockets
Front and side panel of the TV set
Volume up/ down
Channel selector
TV/Video
(input selector
MENU
S terminal
Video1 input terminal
Left sound track
Right sound track
Infrared sensor window
Power switch
Power indicator
Rear panel of the TV set
Antenna input
Video output terminals: VIDEO AUDIO L, R
Video 2 input terminals: VIDEO AUDIO L, R
DVD input terminals: Y, Cb, Cr
If you want to connect the TV set to the other audio/video equipments, please
refer to P23.
Download from Www.Somanuals.com. All Manuals Search And Download.
Buttons on the remote control
Buttons on the remote control
MUTE
ZOOM
SCAN
Program scan
LOCK
CALL
Mute
TV/AV
Zoom function
Mono/stereo(No including)
Program number
Digital selector
Picture mode selection
Volume selection
Picture menu
Light on (No including)
Time menu
SWAP
S.STD
P.STD
Function menu
Exit screen display
Tune menu
CH+
Light off (No including)
Sound menu
VOL-
VOL+
MENU
CH-
Menu selection / adjustment
Channel selection
Sound mode selection
Former program
Call screen display
TV/AV exchange
Stand by
PICTURE
SOUND
LIGHT
ON
LIGHT
OFF
TIME
TUNE
EXIT
Lock/unlock selectable
FUNCTION
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching on/ off the TV set
In the following, the methods of using power switch and the remote control to switch
on/off power supply for the TV set will be explained.
Switching on/ off the TV set
Switching on/ off the TV set
1 Please press down the power switch to switch
on AC power supply and the power indicator will
light .
2 If the indicator is lighting in red, press button
MENU
TV/Video
(input selector
Channel selector
Volume up/ down
on the remote control again.
Note
1 When you don't operate the TV set with the
remote control, you can turn on it directly by
pressing the P+/- buttons on the TV set.
Power indicator
Infrared sensor window
Power switch
4
AUTO
BG
144.25MHz
2 If you want to exchange to standing by status,
please press down button
control.
on the remote
3 If you want to fully switch off the power supply
for the TV set, please press down the power switch
button on the TV set.
Auto switch-off function
When the "Back" function is ON, if an empty
channel is selected or the TV programs are
ended for the day, the power will be switched off
5 minutes later automatically. If the "OFF TIME"
is ON, it will be switched off according to the
presetting time. The auto power off function
does not work under video input or when the
background is off.
(Note: If the "Off timer" is less than 5 minutes, it
will be switched off automatically to the presetting
time. )
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV
You can watch TV program in a presetting channel.
Watching TV program
How to select TV program
Select the desired program
1 Using "Program number" buttons
Directly enter thechannel number withthe numeric keypad
on the remotecontrol.
To select channel numbersfrom 10 ~99 press [-/--]button
and enter thetwo digit channelnumber
To select channel numbersfrom 100 ~218 press [-/--]button
twice and enterthe 3 digitchannel number
2 Using the CH+/- buttons
Press the CH+ button to select a channel number in number
increasing direction.
Press the CH- button to select a channel number in number
decreasing direction.
CH+
Select the desired sound
VOL-
VOL+
MENU
Press the VOL-/+ buttons on the remote or the front of the
TV set to adjust the volume level. The range is 0~99. When
the volume buttons are pressed the volume level is
displayed automatically on the TV screen.
CH-
TUNE
If the colour of some channel is abnormal
Usually this shouldbe set inthe
Auto position. Howeverif the
colours displayed onthe screen
are incorrect youcan manually
select the correctcolour system.
When finish rememberto turn it
back to autoagain so thatother
programs will stillwork correctly.
Press the TUNE button andthe
setting menu shownon the right
will display onthe screen.
TUNING
COLOR SYSTEM AUTO
BAND
SKIP
VHFL
OFF
0
PROG NO
SEARCH
FINE TUNE
AUTO SEARCH
CH+
MENU
CH-
VOL-
VOL+
If picture colour is abnormal
Press the CH+/- buttons to select "COLOR SYSTEM",
then press the VOL-/+ buttons to select the correct colour
system. In general, you can set it as "AUTO" AUTO,PAL,
NTSC and NTSC443 will display in turn
.
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV Continued
Swapfunctionenablesquickswaptothelastwatchedprogram.
Auto scan function enables automatic successive scanning of all the programs in
memory (each channel will last about 2 seconds), so that you are free from the trouble of
pressingkeys.
Program swap and auto scan functions
Program swap
1 Suppose the channel number
you used just now is 8 and the
channel number you are using
is 18 (as shown in the figure).
18
AUTO
BG
695.25MHz
SWAP
8
AUTO
BG
199.25MHz
2 If you want to return to the
last watched program channel
8, you can simply press the
SWAP button.
18
AUTO
BG
695.25MHz
3 If you want to return to
channel 18, press the button
again. Through this function,
you can easily change
between the channel you are
using and the channel you
used last time.
Auto program scan
1If you want to select a
desirable program, you may
scan all the TV programs in
memory. You can simply press
the SCAN key to do this. The
programs will appear one after
another from beginning to end
(each channel number will last
about 2 seconds).
SCAN
1
AUTO
BG
62.25MHz
2
BROWSE
3
BROWSE
1
AUTO
BG
62.25MHz
2 If you want to stop the function
during auto scanning, simply
presstheSCANbutton again.
Download from Www.Somanuals.com. All Manuals Search And Download.
Searching channel
This TV set has three methods to set channels, which are respectively full automatic,
semi automatic and manual fine tune.
-
In this section, how to use the remote control to set channel is explained. You can also
use buttons on the TV set to set channel.
Full automatic mode
TUNE
1 Press the TUNE menu button ,
till TUNING menu shown on the
right display on the screen.
2 Press the CH+/- buttons to
select "AUTO SEARCH".
CH+
TUNING
COLOR SYSTEM AUTO
VOL-
VOL+
MENU
CH-
BAND
SKIP
VHFL
OFF
0
PROG NO
SEARCH
FINE TUNE
AUTO SEARCH
3 Press the VOL+ button to
ensure automatic search
function work.
All channels now playing
program will be automatically
preset in order .
After the search has finished,
the first program number will
display on the screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
Searching channel Continued
Semi-automatic search
Semi-automatic search
1 Press the CH+/- buttons or the
PROGRAM NUMBER 0-9
button to choose desired
1
AUTO
BG
83.50MHz
channels regard channel 1 as
example
TUNE
2 Press the TUNE menu button ,
till the TUNING menu shown on
the right display on the screen.
3 Press the CH+/- buttons to
OCT
CH+
select " SEARCH".
TUNING
COLOR SYSTEM AUTO
VOL-
VOL+
MENU
CH-
BAND
SKIP
PROG NO
SEARCH
FINE TUNE
AUTO SEARCH
VHFL
OFF
0
4 Press the VOL-/+ buttons to
1
start searching.
The VOL- down button is used
for lower side program search.
The VOL+ up button is used for
higher side program search.
Repeat this step, till find the
desired channel.
SEARCH
80.25MHz
Download from Www.Somanuals.com. All Manuals Search And Download.
Searching channel Continued
Manual fine tune
Manual fine tune
If the picture and/or sound are poor, try using the FINE
TUNE feature. Do not use this feature unless
reception is poor.
CH+
MENU
CH-
1 Press the CH+/- buttons or
1
PROGRAM NUMBER 0-9
button to choose desired
channels regard channel 1 as
example
AUTO
BG
83.50MHz
VOL-
VOL+
TUNE
2 Press the TUNE menu button ,
till the TUNING menu shown on
the right display on the screen.
3 Press the CH+/- buttons to
select " FINE TUNE".
CH+
MENU
CH-
VOL-
VOL+
4 Press the VOL-/+ buttons all
through to carry out fine tune,
till the best picture and sound
are obtained, then loosen the
button.
1
FINE TUNE
83.50MHz
Download from Www.Somanuals.com. All Manuals Search And Download.
Searching channel
Continued
Program skip
Program skip
The Program skip feature enables you to skip/hide
programs that you do not wish to be displayed when
using the CH+/- buttons. These channels will still be
displayed by directly using the channel number
buttons on the remote control.
CH+
MENU
CH-
1 Press the CH+/- buttons or
PROGRAM NUMBER 0-9
button to choose desired
channels regard channel 1 as
example
1
AUTO
BG
83.50MHz
VOL-
VOL+
2 Press the TUNE menu button ,
till the TUNING menu shown on
the right display on the screen.
TUNE
OCT
TUNING
COLOR SYSTEM AUTO
BAND
SKIP
PROG NO
SEARCH
FINE TUNE
AUTO SEARCH
VHFL
OFF
0
3 Press the CH+/- buttons to
select "SKIP".
OCT
4 Press the VOL-/+ buttons to
turn the SKIP function "ON".
CH+
MENU
CH-
TUNING
COLOR SYSTEM AUTO
VOL-
VOL+
BAND
SKIP
VHFL
ON
0
PROG NO
SEARCH
FINE TUNE
AUTO SEARCH
5 Press the TUNE button to close
the menu. When you use the CH+/-
buttons to select channel, this
channel will be skipped. However,
you can still use the PROGRAM
NUMBER buttons to select the
skipped channel numbers.
If you want to recover the skipped channel
1 Use the PROGRAM NUMBER buttons to select the channel
number to be recovered.
2 Repeat those steps just now.
3 Press the VOL-/+ buttons to turn the SKIP function "OFF".
Download from Www.Somanuals.com. All Manuals Search And Download.
Convenient picture and sound control functions
Multiple picture modes
How to select picture modes
You can quickly select the desired picture mode from
four preset modes and one customized mode.
P.STD
STANDARD
Press the P.STD button to select the
RICH
desired picture quality. Five kinds
of picture modes (i.e., "STANDARD",
USER
"RICH", "USER","LISTEN",
LISTEN
"SOFT" ) can be selected in turn.
SOFT
The 5 modes are
Listen-This is a new feature that blacks out the TV
screen when listening to music only channels;
Soft-Designed for night time low light viewing;
Standard -Designed for rooms that have good all round
lighting;
Rich-Designed for rooms with high ambient lighting such
as daytime sport;
User-A spare setting that can be adjusted to personal
tastes.
How to customize your own picture status
PICTURE
1 Press the PICTURE menu button , till the PICTURE menu
shown on the right display on the screen.
OCT
2 Press the CH+/- buttons to
select the item to adjusted,
PICTURE
then press the VOL-/+ buttons
CONTRAST
BRIGHTNESS
COLOR
48
32
48
40
to obtain the desired effect.
SHARPNESS
CH+
VOL-
VOL+
MENU
CH-
I T E M
Press VOL-
Press VOL+
Strong
Contrast
Brightness
Color
Weak
Dark
Bright
Deep
Sharp
Shallow
Soft
Sharpness
Note:
The "Hue" item only appears when the colour system is NTSC.
Download from Www.Somanuals.com. All Manuals Search And Download.
Convenient picture and sound control functions
Continued
Black stretch and noise reduce
How to select black stretch
FUNCTION
OCT
1 Press the FUNCTION menu
button , till the FUNCTION menu
shown on the right display on the
screen.
FUNCTION
BACKGROUND
BLACK STRETCH
NOISE REDUCE
FADE
ON
OFF
ON
ON
ON
CH+
MENU
CH-
AVL
2 Press the CH+/- buttons to
select "BLACK STRETCH".
VOL-
VOL+
OCT
FUNCTION
BACKGROUND
BLACK STRETCH
NOISE REDUCE
FADE
ON
ON
ON
ON
ON
3 Press the VOL-/+ buttons to
turn the BLACK STRETCH
function "ON" or "OFF".
AVL
How to select noise reduce
FUNCTION
OCT
1 Press the FUNCTION menu
button , till the FUNCTION menu
shown on the right display on the
screen.
FUNCTION
BACKGROUND
BLACK STRETCH
NOISE REDUCE
FADE
ON
OFF
ON
ON
ON
AVL
CH+
2 Press the CH+/- buttons to
select "NOISE REDUCE".
VOL-
VOL+
MENU
CH-
OCT
FUNCTION
BACKGROUND
BLACK STRETCH
NOISE REDUCE
FADE
ON
ON
ON
ON
ON
3 Press the VOL-/+ buttons to
turn the NOISE REDUCE
function "ON" or "OFF".
AVL
Download from Www.Somanuals.com. All Manuals Search And Download.
Convenient picture and sound control functions
Continued
Multiple sound modes
How to choose sound mode
Press the S.STD button to select the
desired sound quality. Four kinds
of sound models (i.e., "THEATER",
"MUSIC","USER" and "SPEECH")
can be selected in turn.
THEATER
S.STD
MUSIC
USER
SPEECH
The 4 modes are:
Speech-Designed to reducethe bass andtreble which
enhances the voicefor news programs;
Theatre-Enables extra bass and treble to enhance the
movie experience;
Music-Adjust the soundto best suitmusic programs;
User - A spare setting that can be adjust to personal
tastes.
How to customize you own sound quality
SOUND
1 Press the SOUND menu button ,
till the SOUND menu shown on
the right display on the screen.
SOUND
VOLUME
BASS
45
48
48
0
ON
ON
2 Press the CH+/- buttons to
move select the item to be
adjusted, then press the VOL-/+
buttons to obtain the desired
effect.
TREBLE
BALANCE
SURROUND
WOOFER
CH+
MENU
CH-
VOL-
VOL+
I t e m
Press VOL-
Weak
Press VOL+
VOLUME
BASS
Strong
Strong
Strong
L down
Weak
TREBLE
BALANCE
Weak
R down
Download from Www.Somanuals.com. All Manuals Search And Download.
Convenient picture and sound control functions
Continued
Surround, Woofer and mute functions
How to use surround
1 Press the SOUND menu button , till the FUNCTION menu
shown on the right display on the screen.
SOUND
2 Press the CH+/- buttons to
select "SURROUND", then
SOUND
VOLUME
BASS
45
48
48
0
ON
ON
press the VOL-/+ buttons to
turn the SURROUND to ON..
CH+
TREBLE
BALANCE
SURROUND
WOOFER
VOL-
VOL+
MENU
CH-
How to use Woofer
1 Press the SOUND menu button , till the FUNCTION menu
shown on the right display on the screen.
SOUND
2 Press the CH+/- buttons to
select " WOOFER ", then
SOUND
VOLUME
BASS
45
48
48
0
ON
ON
press the VOL-/+ buttons to
turn the Woofer to ON.
CH+
TREBLE
BALANCE
SURROUND
WOOFER
VOL-
VOL+
MENU
CH-
How to eliminate sound
1 Press the MUTE button on the
remote control and "MUTE" type
face will display on the lower part
of the screen. At this time, the
sound of the TV set is turned off.
MUTE
MUTE
2 If you want to recover the sound,
press the MUTE button again or
directly press the VOL-/+ buttons.
Download from Www.Somanuals.com. All Manuals Search And Download.
Time functions
Clock setting and timer on/off functions
Clock setting
The clock will only work if the TV set if left turned on
or in standby. When the set is disconnect from the
power supply or is turned off by the main power on
the front panel, the clock losespower and will need to
be reset when the power is reconnected.
TIME
1 Press the TIME menu button,
and the TIME menu display on
the screen.
TIME
CLOCK
17:18
18:00
1
--:--
0
CH+
MENU
CH-
ON TIME
ON PROG
OFF TIME
SLEEP TIME
REMIND TIME
REMIND PROG
2Press the CH+/- buttons select
"CLOCK", then press the VOL -
/+ buttons to adjust the time in
hour position; press again the
CH+/- buttons to select the
time in minute position, then
press the VOL +/- buttons to
adjust the value of minutes .
VOL-
VOL+
--:--
1
On/off timer
Using on/off timer function, the TV set can automatically
turn on to a preset program or shut down in a preset time.
TIME
1 Press the TIME menu button
to call up the TIME menu on the
screen.
TIME
CLOCK
ON TIME
ON PROG
OFF TIME
SLEEP TIME
REMIND TIME
REMIND PROG
17:18
18:00
1
--:--
0
2 Press the CH+/- buttons to
select "ON TIME", then press
the VOL -/+ buttons to set the
value in hour position; press
again the CH+/- buttons to
select the minute position and
set the value of the minute.(take
18:00 as an example)
--:--
1
CH+
MENU
CH-
VOL-
VOL+
3 Press the CH+/- buttons to
select "ON PROG", then press
the VOL-/+ or program direct
number buttons to select your
desired channel (take 8 as an
example).
TIME
CLOCK
ON TIME
ON PROG
OFF TIME
SLEEP TIME
REMIND TIME
REMIND PROG
17:18
18:00
8
23:00
0
--:--
1
4 Repeat step 1-2 to set OFF
TIME.(take 23:00 as an example)
Download from Www.Somanuals.com. All Manuals Search And Download.
Time functions Continued
Sleep timer and program presetting
Sleep timer
The TV set have 18 sections
0
option for sleep timer function
(each section has a time
interval of 10 minutes) (See right
chart):
10
20
TIME
170
180
1 Press the TIME menu button,
and the TIME menu display on
the screen.
CH+
TIME
CLOCK
ON TIME
ON PROG
OFF TIME
SLEEP TIME
2 Press the CH +/- buttons to
select "SLEEP TIME".
17:18
18:00
8
23:00
120
--:--
1
VOL-
VOL+
MENU
CH-
3 Press the VOL -/+ buttons to
adjust the SLEEP TIME level.
REMIND TIME
REMIND PROG
REMIND PROG function
Program remind timer, that displaysan on-screen reminder
prompt, when aprogram on adifferent channel is due tostart.
1 Press the TIME menu button
to call up the TIME menu on the
screen.
TIME
TIME
CLOCK
ON TIME
ON PROG
OFF TIME
SLEEP TIME
REMIND TIME
REMIND PROG
17:18
18:00
8
23:00
120
2 Press the CH +/- buttons to
select "REMIND TIME", then
press the VOL -/+ buttons to
set the value in hour position;
press again the CH+/- buttons
to select the minute position,
and then set the value of the
minute.(take 19:00 as an
example)
19:00
1
CH+
MENU
CH-
VOL-
VOL+
3.Press the CH+/- buttons to
move the cursor to "REMIND
PROG", then press the VOL -
/+ buttons or the program
direct number buttons to set
the desired channel (take 18
as an example).
TIME
CLOCK
ON TIME
ON PROG
OFF TIME
SLEEP TIME
REMIND TIME
REMIND PROG
17:18
18:00
8
23:00
120
19:00
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Set up functions
Screen saver and AV L functions
How to start screen saver function
When the BACKGROUD function
is ON, the screen will turn
automatically as shown "NO
SIGNAL" of moving ( black
background).
NO SIGNAL
FUNCTION
1 Press the FUNCTION menu
button till the FUNCTION menu
,
shown on the right display on the
screen.
OCT
CH+
FUNCTION
BACKGROUND
BLACK STRETCH
NOISE REDUCE
FADE
2 Press the CH+/- buttons to
select "BACKGROUND" and press
the VOL-/+ buttons to turn the
BACKGROUND function "ON" .
ON
ON
ON
ON
ON
VOL-
VOL+
MENU
CH-
AVL
AVL function
Automatic Volume Limit control reduces effect of large
volume changes such as when the ads come on.
OCT
1 Press the FUNCTION menu
FUNCTION
button till the FUNCTION menu
,
shown on the right display
on the screen.
FUNCTION
BACKGROUND
BLACK STRETCH
NOISE REDUCE
FADE
ON
ON
ON
ON
OFF
AVL
CH+
2 Press the CH+/- buttons to
select "AVL" .
OCT
VOL-
VOL+
MENU
CH-
FUNCTION
BACKGROUND
BLACK STRETCH
NOISE REDUCE
FADE
ON
ON
ON
ON
ON
3 Press the VOL-/+ buttons to turn
AVL
the AVL function "ON" or "OFF"
.
Download from Www.Somanuals.com. All Manuals Search And Download.
Set up functions Continued
Switch on/off modes
Switch on/off modes
Provides professional picture fades between channel
change to reduce the effect of bright light flashes
common with channel change
FUNCTION
OCT
1 Press the FUNCTION menu
button till the FUNCTION
,
menu shown on the right
display on the screen.
FUNCTION
BACKGROUND
BLACK STRETCH
NOISE REDUCE
FADE
ON
ON
ON
ON
ON
AVL
OCT
2 Press the CH+/- buttons to
select "FADE" .
CH+
FUNCTION
BACKGROUND
BLACK STRETCH
NOISE REDUCE
FADE
VOL-
VOL+
MENU
CH-
ON
ON
ON
ON
ON
AVL
3 Press the VOL-/+ buttons to turn
OCT
the FADE function "ON" or "OFF"
.
FUNCTION
BACKGROUND
ON
BLACK STRETCH ON
NOISE REDUCE
FADE
AVL
ON
ON
OFF
Download from Www.Somanuals.com. All Manuals Search And Download.
Position exchange function
Exchange
Exchange
This feature enables TV programs that may be on a wrong TV
channel number to be swapped/exchanged. This feature is
very useful when Automatic Search Tuning has been used, to
reallocate the found programs to the correct channel numbers.
CH+
MENU
CH-
OCT
1 Press the MENU button again
(7 times) till the EXCHANGE
,
menu display on the screen.
VOL-
VOL+
EXCHANGE
PROG NO 1
PROG NO 2
EXCHANGE
6
2
2 Press the VOL-/+ buttons or the
PROGRAM NUMBER 0-9
buttons to set PROGRAM 1 TO 6.
CH+
MENU
CH-
3 Press the CH+/- buttons to move
cursor to " PROG NO 2".
VOL-
VOL+
OCT
4 Press the VOL-/+ buttons or
PROGRAM NUMBER 0-9
EXCHANGE
buttons to set PROG NO 2 TO
9.
PROG NO 1
PROG NO 2
EXCHANGE
6
9
5 Press the CH+/- buttons to
select "EXCHANGE".
CH+
MENU
CH-
VOL-
VOL+
6 Press the VOL-/+ buttons to set
"EXCHANGE".
OCT
EXCHANGE
PROG NO 1
PROG NO 2
EXCHANGE
6
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Others functions
Calendar, child lock and display functions
Calendar function
1 Press the MENU button again
OCT
(6 times) till the calendar menu
,
display on the screen.
CH+
MENU
CH-
2 Press the CH+/- buttons to turn
the YEAR/MONTH/DAY,press the
VOL-/+ buttons to set or adjust
the YEAR/MONTH/DAY.
VOL-
VOL+
Child lock function
When the TV set is on, press the LOCK button on the remote
control , then child lock function starts to take effect. At this
time, except for "POWER" button and "DISPLAY" button on
the remote control still take effect, the other buttons
(including the functional buttons on the TV set) all do not take
effect and this status can be kept even if the TV set is off.
When to cancel the child lock function, press LOCK button
on the remote control ,then indicating the chid lock function
has been cancelled.
LOCK
Display function
CALL
Press the CALL button, then
3
AUTO
BG
62.5MHz
the channel number and
system will be displayed on
the screen.
If you want to eliminate MENU display immediately
In general, after you press the MENU button, the menu item
display (PICTURE, SOUND, TIME, FUNCTION, TUNE,
CALENDAR, EXCHANGE, ETC.) will automatically disappear
within 15 seconds. If you want to eliminate these contents
immediately, please press the EXIT button.
EXIT
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the TV set to the other video and audio equipments
Connecting to the other video and audio equipments
You can connect a stereo to theAUDIO output terminals on the TV set to enjoy sounds of
higher quality. VIDEO andAUDIO output terminals output the video and audio signals being
monitoredbytheTVset. Theelectriclevelsofvideoandaudiooutputsignalsarefixed.
To outside input
To video/audio input
DVD, VCD and other reproducing equipments
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting guide
To assist in location possible faults use help guide below.
BREAKDOWN PHENOMENON
CHECKING
PICTURE
SOUND
The aerial direction and connection
Picture with snow
Noise
This is calledghosting which canbe minimized with
an outside aerial, and good qualitycable and
terminations. Alteringthe aerial directioncan also
minimize this effect.
Double or Triple Image
Normal
Electrical interference whichcan be caused
by cars, motorbikesetc, Fluorescent lamps
and dirty insulatorson overhead power
cables.
Noise
Disturb
Volume Sound mute
Normal
No Picture
No colour
No sound
Ensure that the power supply is connected to the TV
set and turned on. Also ensure that the TV set isnot
in "Listen Mode" or that the brightness and contrast
are not turned down.
No sound
Adjust colour control
Adjust channel again
Normal volume
Normal or Weak Volume
Scramble
Colour Purity faultwhich can becaused by moving
the TV set,placing magnets nearthe TV screenor
turning on/off household appliances suchas vacuum
cleaners near theTV set. Turn the TV off with the
mains power switchfor 15 minutes. When the power
is turn onagain the TVset will automaticallydegauss
the picture. Inserver cases leavethe TV setturned
off over night.
Colour Spot
Normal volume
Note:
1.If the fault can not be repaired using the above guide consult with your local authorized service
center.
2.The TV set must only be repaired by a qualified registered service person. Never attempt to
remove the back cover as the TV set has dangerous voltages in side that may cause a fatally or fire.
3. The cabinet may produce the occasional "snapping sound" This is normal and caused by the
materials in the cabinet expanding with room temperature changes.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
M o d e l
34F9K
AUTO PAL AV NTSC
Colour system
Sound system
Display tube
BG
34 " pure flat CRT
5W+5W & 5W
Sound output power
Power supply
AC 160V-250V~, 50/60Hz
<180W
Power consumption
Size mm
848 width
depth
height
Remote control
Owner's manual
Battery(AA)
X1
X1
X2
Supplied
accessories
The design and specifications may be changed without notice.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|