COLOUR TV RECEIVER
OWNER'S MANUAL
The Owner's Manual for the Follow Models:
29MT1,29FA18
Please read this manual carefully
before operating the unit, and keep
it for future reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Cautions
4. To prevent the TV set from firing
and electric shock, don't expose the
TV set to rain or moisture.
1. When you clean the TV set, please
pull out the power plug from AC outlet.
Don't clean the cabinet and the
screen with benzene, petrol and other
chemicals.
2. In order to prolong the using life of
the TV set, please place it on a
ventilated place.
5. Don't open the back cover,
otherwise it is possible to damage the
components in the TV set and harm
you.
6. When the TV set isn't going to be
used for long time or it is in thunder
and lightening, please pull out the
plug from AC outlet and the antenna
plug from the cover of the TV set.
3. Don't place the
TV set in the
sunshine or near
heat source.
Explanation on the display tube
In general, it is not needed to clean the tube surface. However, necessary,
it's surface can be cleaned with a dry cotton cloth after cutting off the power.
Don't use any cleanser. If using hard cloth, the tube surface will be damaged.
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Antenna connection
Generally speaking, to enjoy a clearer picture, we recommend that you use a CATV
system or an outdoor antenna .In different places, the suitable antenna type and position
are different.
300 twin-lead cable
Antenna adapter
75 coaxial cable
Mixer
additional
purchase
Antenna input
75 standard
coaxial type
Plug
(additional purchase)
AC power socket
Note
* It is recommended that you'd better use 75 coaxial cable to remove the
disturbance caused by airwave.
* Don't bind antenna cable and electric wire together.
Preparation for the remote control
Tips for remote operation
Battery installation
Remove the batteries cover.
The battery life should be about one year
undernormaluse.
Insert two size AAA batteries matching
the +/-polarities of the battery to the +/-
marks inside the battery compartment.
If the remote control will not be used for a
long period of time or when the batteries are
worn out, remove the batteries to prevent
leakage.
Do not throw the batteries into fire.
Dispose of used batteries in the specified
manner.
Do not drop, dampen or disassemble the
remotecontrol.
Download from Www.Somanuals.com. All Manuals Search And Download.
Position of Keys and Plug-ins
Front and side panel
29FA18-T
R
Audio Input
terminal
AUDIO
L
VIDEO
Video Input
terminal
29MT1:
Audio Input
terminal
Video Input
terminal
NOTE: The side AV terminals are only available for some model.
Download from Www.Somanuals.com. All Manuals Search And Download.
Position of Keys and Plug-ins
Video Y input terminal
Antenna input socket
Video Cb inputterminal
Video Cr inputterminal
Audio right channelinput terminal
Audio left channelinput terminal
Video input terminal
S-VIDEO input terminal
Video output terminal
Audio right channeloutput terminal
Audio left channeloutput terminal
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Remote Control
Buttons and Descriptions
Mute Button
Press to conceal the sound of programs.
Sleep TimerButton
DISP
TV and AV Exchange Button
Toexchange between TVand
other available videoinputs
TV/AV
Direct-digit Choosing Button
Directly select channel numbers
Program Play-forward Button
Picture Mode SelectButton
There are DYNAMIC, STANDARD,
MILD,MEMORY, PICTURE MUTEand
COLOR MUTE sixmodes of picture.
BACK
S.STD
PRE
Menu Select/Adjust Button
Use this buttonto adjust themenu,
the volume andthe channels, aswell
as to controlthe game.
P.STD
System Adjust Button
CH+
Program Scan Button
Calendar
MENU
VOL+
VOL-
Favorite program button
No available
CH-
SYSTEM
CALENDAR
TDX
SCAN
LOCK
QSET
EXIT
Start/Restart Game Button
Game Exit Button
FAVORITE
GAME
Saving mode on/off button
Lock Setting button
Sound Mode Select Button
Program Play-backward Button
Digit Select Button
Change the channel position number
between one digit, two-digit and three
-digit.
Screen Display Button
DC Standby Button
NOTE: Just see your real set and the instructions on the manual for references.
Download from Www.Somanuals.com. All Manuals Search And Download.
Power On and Power Off
11-14
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing TV Programs
The channels amountto 218 .
Viewing TV programs
How to select the TV program
1. Use the direct-digit choosing button
Press the button from 0-9 to select a one digit channel.
If you want to select a two-digit channel, press the
Digit Select button and change it into two-digit mode,
then press the number of the channel.
If you want to select a three-digit channel, press the
Digit Select button and change it into three-digits mode,
then press the number of the channel.
If the channel position number you select is larger than 218,
the TV will use the first two number as the channel position.
2. Use CH+/- button
Direct-digit Choosing
button
Press CH+ to increase the channel position number.
Press CH- to decrease the channel position number.
3. Use PRE button and BACK button
Digit Select
button
Press PRE button, you can go back to the channels you
viewed (as many as four).
Then, press BACK button, you can return to the channels you
were watching just now (as many as four) .
BACK
PRE
For example, if you have viewed channel 1,2,3,4,5,6 after the
TV is powered on, and the channel you are watching now is
number 7, then press PRE button, you can view channel 6,5,
4,3, and you may press the Back button to return to channel 7.
Choose the proper volume you like
Press VOL+/- button to adjust the volume.
SYSTEM
VOLUME
If the color of one channel is abnormal
It might be because the color has been
set improperly.You may follow the
instruction below toadjust it. Press
SYSTEM button, and you can see
the form.
CH+
MENU
CH-
If the color of the picture is abnormal
Press CH+/- button, and move the indicator to COLOR,
and press VOL+/- button to select the proper color(AUTO,
NTSC3.58,NTSC4.43 and PAL will appear alternately).
Generally, please set to AUTO.
VOL+
VOL-
If the sound is abnormal
Press CH+/- button, and move the indicator to SOUND,
and press VOL+/- button to select the proper sound.
(If there is only one sound system for your country, the sound
system may not be adjust)
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing TV Programs(continued)
Program scanning function is to let the television automatically scan all
preconcerted channel program(abouttwo seconds perchannel).
Program scan and screen display
Program scanning function
1. If you want to scan the programs
and select your favorite channel ,
just press the SCAN button, then
the television will start scanning
SCAN
from the present channel with a
rate of two seconds per channel
and until all the preconcerted
programs have been displayed
once, the TV set will return to the
starting channel.
2. If you want to terminate this
function during the scanning, press
the SCAN button again, and the
program will stay at the present channel.
Screen display
Usually, when you press the DISP button, the channel
DISP
number will appear on the top right corner of the screen
and press it twice, the count time will also appear
on the screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing TV Programs(continued)
Saving mode.favorite program
Saving mode
1. Using the QSET button
Press the QSET button to switch the saving mode
CH+
MENU
CH-
on/off. And the screen will dispal y on/off at the same
time.
Press the QSET button more than 3 seconds to
call the ENERGY SAVE menu .
VOL+
VOL-
2.Press VOL+/- and CH+/- to setthe options of
AMBI-LUM/ AMBI-SND, after this select the adjust
option and press VOL+/- to adjust the bright/volum
-e.etc to achieve the better picture and sound effect .
ENERGY
SAVE
AMBI-LUM BRI.
AMBI-SND NOISE
ADJUST
SELECT
ADJUST
QSET
Note: If the saving mode is on, the buttons P.STD and
S.STD will not work.
Favorite program setting
Press FAVORITE button for long time to enter the menu
as right figure. Press CH+/- to select the favorite program
and VOL+/- toadjust the channel. You could set 8favorite
programs.
After the setting, pressFAVORITE button to select
your favorite channel you have set .
FAVORITE
FAV.POS
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuning
There are three ways of searching: automatic search, manual search and MFT
(manual fine tune).
You may operate it either on the TV or on the remote control. Here is mainly about
the remote control.
Automatic search
Automatic search
1. Press MENU button
TUN
continuously, until select
TUN menu.
POS. EDIT
POS. EX.
SEARCH
UP
CH+
MENU
CH-
AUTO MEMORY
VOL+
VOL-
2. Press CH+/- button to move
the indicator to AUTO MEMORY.
TUN
POS. EDIT
POS. EX.
SEARCH
UP
AUTO MEMORY
3. Press VOL+, then AUTO MEMORYmode will work.
The TV set will search automatically all available programs
then all available programs will be stored in turn and the
TV set will return to the first channel.
ASM
U
0
STOP
If you want to stop the search, just press VOL- button.
The order of the automatic search is due to the frequency
of the program, generally speaking, it is used only at the
first time you search the program, and once the order of
the program has been confirmed, you don't have to use
this function, otherwise the order of the program will be
changed.
CH+
MENU
CH-
After searching
VOL+
VOL-
Press CH+/- button to check the channels.
If the color is abnormal in a certain channel, it may be
the color system has not been set properly, so you
should adjust it to the proper system (Reference to
page 8).
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuning(continued)
Manual search
Manual search
1. Press CH+/- button or the Direct-digit Choosing button to
select a channel directly(take channel 1 for example).
CH+
MENU
CH-
2. Press MENU button
continuously, until select
TUN menu.
VOL+
VOL-
TUN
POS. EDIT
POS. EX.
SEARCH
AUTO MEMORY
UP
3. Press CH+/- button and move
the indicator to SEARCH.
TUN
POS. EDIT
POS. EX.
SEARCH
UP
AUTO MEMORY
Direct-digit Choosing
Button
CH+
4. Press VOL+/- button to start searching.
MENU
CH-
VOL+
VOL-
VOL- button is used to search the lower frquency channel.
VOL+ button is used to search the higher frequency channel.
Repeat the steps until you find the channel you need.
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuning(continued)
MFT
MFT(manual fine tune)
CH+
MENU
CH-
When you can't get a satisfactory picture and audio effect,
you can fine tune to obtain.
VOL+
VOL-
1. Press MENU button
continuously, until select
TUN menu.
TUN
POS. EDIT
POS. EX.
SEARCH
AUTO MEMORY
UP
2. Press CH+/- button to select
POS EDIT and VOL+ to enter.
TUN
POSITION
BAND
SKIP
1
VL
ON
UP
MFT
42.13MHZ
3. Press CH+/- button to select POSITION and VOL+/- to
select the channel (Take channel 1 for example)
Direct-digit Choosing
Button
Note: the same way to adjust the BAND, and VL/VH/U will
appear alternatively..
4. Press CH+/- button and move the indicator to MFT.
TUN
CH+
POSITION
BAND
SKIP
1
VL
ON
UP
MENU
CH-
VOL+
VOL-
MFT
42.13MHZ
5. Press VOL+/- button repeatedly to fine tune, until the
picture and the sound become satisfactory.
VOL- button is used to search the lower frquency channel.
VOL+ button is used to search the higher frequency channel.
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuning(continued)
Skip
Skip
After the programs are presetted, you can skip some
programs to select your favorite channels only.
1. Press MENU button
continuously, until select
TUN menu.
TUN
POS. EDIT
POS. EX.
SEARCH
AUTO MEMORY
UP
2. Press CH+/- button to select
POS EDIT and VOL+ to enter.
3.Press CH+/- button to select
POSITION and VOL+/- to select
the channel(Take channel 1 for
example)
Direct-digit Choosing
Button
TUN
POSITION
BAND
SKIP
1
VL
ON
UP
4. Press CH+/- button and move
the indicator to SKIP.
MFT
120.19MHZ
CH+
5. Press VOL+/- button to set it
ON.
TUN
MENU
CH-
VOL+
VOL-
POSITION
BAND
SKIP
1
VL
ON
UP
MFT
6. Press MENU button to close the menu. When you select
channels with CH+/- button, this channel will be skipped.
However, you can also use the Direct-digit Choosing button
and Digit Select button on the remote control to select this
channel directly.
If you want to recover the skipped channel
1. Use Direct-digit Choosing button to select the number of the
channel to be recovered.
2. Do the above steps again.
3. Press VOL+/- button to set SKIP OFF.
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Picture and the Sound
Multiple picture modes
How to select the picture mode
You may select the mode you want from the
five preset modes and one individual mode.
DYNAMIC
STANDARD
P.STD
Press the P. STD button to select a mode you
like.DYNAMIC PICTURE, STANDARD
PICTURE, MILD PICTURE, MEMORY,
PICTURE MUTE and COLOR MUTE,
totally six picture modes can be selected
alternately.
MILD
MEMORY
PICTURE MUTE
COLOR MUTE
MODE
DYNAMIC
STANDARD
MILD
PICTURE QUALITY
BRIGHT COLOR
MEDIUM COLOR AND BRIGHTNESS
LOW COLOR AND BRIGHTNESS
SET BY YOURSELF
MEMORY
PICTURE MUTE NO PICTURES
COLOR MUTE
BLACK AND WHITE PICTURE
If the picture mode is set to PICTURE MUTE or COLOR
MUTE,it will autorenew to MEMORY mode when you
restart your TV set with remote control.
Set the parameter of MEMORY
PIC
1. Press MENU button
continuously until select
PICT menu,press CH+/-
to select ADJUST and VOL+/-
to enter.
ADJUST
3A FILTER
B.B
CH+
MENU
CH-
ON
2. Press CH+/- button, move the
indicator to the option you want
to adjust, then press VOL+/-
button to do the adjustment.
Then the parameter will be
automatically stored in MEMORY
option.
VOL+
VOL-
PIC
CONTRAST
BRIGHT
COLOR
100
50
50
50
SHARP
VOL+
OPTION
VOL-
CONTRAST
BRIGHT
COLOR
STRONG
BRIGHT
THICK
WEAK
DARK
LIGHT
SOFT
SHARP
SHARP
PURPLE
TINT
GREEN
*The item of TINT appears when the N system signal is received,
and you can adjust it by VOL-/+ button.
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Picture and the Sound
(continued)
Multiple Sound ModesandSettingtheSound
How to select the sound mode
You can quickly select your most favored
sound mode from the following three
kinds of modes.
Press the S.STD button to select the
sound quality that you want.LOW VOL/
NORMAL VOL/ HIGH VOL can be
selected in turn(their parameter may
be adjusted due to your need).
LOW VOL
S.STD
NORMAL VOL
HIGH VOL
Setting the sound
This function can let you regulate the volume to the
preconcerted parameter quickly( such as the LOW VOL/
NORMAL VOL/ HIGH VOL).
1. Press MENU button continuously until select
SND menu.
CH+
MENU
CH-
2. Press CH+/- button, move
the indicator to the HIGH VOL,
SND
LOW VOL
00
00
00
50
then press VOL+/- button to
adjust the parameter you
expect. With the same method,
you can adjust the parameter
of the LOW VOL and NORMAL
VOL
NORMAL VOL
HIGH VOL
BALANCE
VOL+
VOL-
Suppose the LOW VOL is A, NORMALVOL is B, HIGH VOL
is C, they should be: 0 100
A
B
C
You should adjust themin the sequenceof HIGH VOL,
NORMAL VOLand LOW VOL.
S.STD
BALANCE on thisOSD is justavailable in somemodels.
3. Press the S.STD button repeatedly to select the
different sound setting modes.
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Picture and the Sound
(continued)
S.C.C, auto off and mute
How to use the S.C.C(soft change channel)
This TV set provides you with the function of S.C. C.
When it is set "ON", the picture will fade in and fade
out when the channel is changed.
1. Press MENU button
continuously until select
FUN menu.
CH+
MENU
CH-
FUN
AUTO OFF
S.C.C
ON
OFF
>
VOL+
VOL-
SPECIAL
2. Press CH+/-button, move
the indicator to the S.C.C,
then press VOL+/-button to
set it ONor OFF.
Note: This function is only available in some models,
please see the real.
Auto off
Toprevent from forgettingturning off the TV, this TV
could turn off automatically. That is , if the off timer is
set on and after two hours without any operation, this
TV will switchinto standby modeautomatically to
save your energy.
How to use the MUTE function
When you want to pay attention to the environment or
answer a telephone, or to meetguests, using themute
function is veryconvenient.
1. Press
button, a sign will
appear at the bottom center
of the screen, and the sound of
the TV set is cutoff.
2. In order to recover the sound, press button again
or press VOL+/-button.
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Timer
This TV set provides you with three timer functions such as timer on, timer off
and sleep off.
Timer off
Timer off
Using this function can turn the TV set automatically
into standby status at the preconcerted time.
1. Press MENU button continuously
until select TIM menu.
TIM
CLOCK
00:00
OFF TIMER 00:00
ON TIMER
ON POS
APP.TIME
APP. POS
OFF
0
OFF
CH+
MENU
CH-
0
VOL+
VOL-
2. Press CH+/- button, move
the indicator to OFF TIMER,
then press VOL+/- button to
set the time.
TIM
CLOCK 00:00
OFF TIMER 00:00
ON TIMER
ON POS
OFF
0
APP.TIME
APP. POS
OFF
0
TIM
CLOCK
OFF TIMER 00:00
3. Press CH+/- button, move
the indicator to CLOCK,
press VOL+/- button, and you
can set the time(It will be the
standard of the clock of
timer on/off).
00:00
CH+
MENU
CH-
ON TIMER
ON POS
OFF
0
APP.TIME
APP. POS
OFF
0
VOL+
VOL-
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Timer (continued)
Sleep timer and on timer
Sleep timer
Using this function, the TV set can be changed into the
standby status after a period of preset time from when
this function is activated.
1. The utmost time for this function is
120 minutes, and the time interval is
10 minutes.There are totally 12 kinds
of off-time.
2. Press the
button repeatedly,
the screen will show in turn as the
right form.
On Timer
When this function is used, the TV set can
automatically turn the power on at the preset time in
the standby statusand display thepreset program.
1. Press MENU button continuously
until select TIM menu.
CH+
MENU
CH-
TIM
VOL+
VOL-
CLOCK 00:00
OFF TIMER 00:00
2. Press CH-button, move
the indicator to ON TIMER.
Then, press VOL+/-button to
set the time.
ON TIMER
ON POS
OFF
0
APP.TIME
APP. POS
OFF
0
3. Press CH+/-button, move
the indicator toON POS,
press VOL+/- button to set
the channel with which the
TV is turned on(take 5 for
example).
TIM
CH+
MENU
CH-
CLOCK 00:00
OFF TIMER 00:00
ON TIMER
ON POS
APP.TIME
APP. POS
OFF
0
OFF
0
VOL+
VOL-
4. Press CH+/- button, move
the indicator to CLOCK,
press VOL+/- button, and you can set the time(same as
OFF TIMER and it will be the standard of the clock of
ON/OFF TIMER ).
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Timer (continued)
CH+
MENU
CH-
VOL+
VOL-
CH+
MENU
CH-
VOL+
VOL-
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the other Function
3A filter and screen protection
How to use the 3A filter function
1.Press MENU button
PIC
continuously until select
the PIC menu. Then
press CH+/- buttonto move
the indicator to 3AFILTER,
and press VOL+/-button to
enter
ADJUST
3A FILTER
B.B
ON
CH+
MENU
CH-
VOL+
VOL-
2.Press CH+/- to move the
indicator to the item you want
to adjust andthen VOL+/- to
adjust it .
SELECT
ADJUST
How to activate the function of screen protection
If no signal has been received
by the TV set,when theB.B
function is set ON, the screen
will change into the form on
the right shows if the screen
protection is setON .
CH+
MENU
CH-
VOL+
VOL-
PIC
Press MENU button
continuously until select
ADJUST
3A FILTER
B.B
the PIC menu. Then
press CH+/- buttonto move
the indicator to B.B, and
press VOL+/- button to set it
ON.
ON
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the other Function(continued)
Curtain function,calendar display
How to use the Curtain function
This TV set provides three types of Curtain function
for you toselect.
1. Press MENU button until select FUN menu.
CH+
2. Press CH+/- button, and
MENU
CH-
VOL+
VOL-
move the indicatorto
CURTAIN, then press VOL+/-
button to select from I, II
and III.
I: curtain
II : fade in and fade out
III: mixed Iand II
FUN
AUTO OFF
S.C.C
ON
OFF
SPECIAL
How to use the calendar function
CALENDAR
This TV set has been designed to store the calendar
from the year 1900to 2099
1. Press the CALENDAR button
OCT 2002
and then the calendar will
SU
MO
TU
WE TH
FR
SA
appear on the screen(Press the
CALENDAR button again to
conceal the display).
CH+
MENU
CH-
VOL+
VOL-
2. Press CH+/- button to adjust
the YEAR, press VOL+/- button
to adjust the MONTH.
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the other Function(continued)
The function of channel exchange will enable you to exchange any two programs
and you can conveniently adjust the order of the programs due to your own need.
Channel exchange
Channel Exchange
for example, to change between channel1 and 9
1. Press MENU button
continuously until select
TUN menu.
TUN
CH+
MENU
CH-
POS. EDIT
POS. EX.
SEARCH
UP
VOL+
VOL-
AUTO MEMORY
2. Press CH+/- button, move
the indicator to POS.EX.,
Then press VOL+ button to
enter the sub-menu.
EX.POS1
EX.POS2
EXCHANGE
1
1
?
The number shown in
EX.POS1 and EX.POS2is the
number of thepresent channel.
3. Press CH+/- button, move
the indicator to EX.POS2,
then press VOL+ button to set
the channel number to 9.
EX.POS1
EX.POS2
EXCHANGE
1
9
?
Direct-digit Choosing
Button
CH+
MENU
CH-
VOL+
VOL-
4. Press CH+/-button, move
the indicator to EXCHANGE,
then press VOL+button to
confirm. Then the programs
of the two channel will be
exchanged.
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Lock
This TV set provides you with the LOCK function, you can choose it due to your
need to protectyour TV set.
Changing your password
Changing your password
This TV set can set a four digit password, the original
one is 0000, if you want to reset it, please follow the
instructions below.
LOCK
LOCK SET UP
1. Press LOCK button, the
screen will showas the form
on the right.
PASSWORD
CHANGE PW.
TUNING LOCK
PRESET PROG
AV LOCK
----
OFF
OFF
OFF
OFF
OFF
CHILD LOCK
MAX. VOLUME
UNLOCK
CH+
MENU
CH-
2. Press the 0 buttonfour times,
and enter the menu of LOCK
setting. Press CH+/- button
and move theindicator to
CHANGE PW. , and press
VOL+ button to enter the
sub-menu of change
LOCK SET UP
PASSWORD ----
CHANGE PW.
TUNING LOCK
PRESET PROG
AV LOCK
CHILD LOCK
MAX. VOLUME
UNLOCK
VOL+
VOL-
OFF
OFF
OFF
OFF
OFF
password.
3. Press the Direct-digit
Choosing button and input a
four-digits password.
CHANGE PW.
NEW PW.
----
4. After inputting the new
password, return to the
original status as shown on
the right form, then, you can
input the newpassword to
enter the menu of LOCK
setting.
LOCK SET UP
PASSWORD
----
Direct-digit Choosing
Button
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Lock(continued)
Setting the Lock
Setting the Lock
There are TUNING LOCK, PRESET PROG. ,AV LOCK,
CHILD LOCK and MAX.VOLUME five lock setting, you
can set it due to your need.
LOCK SET UP
PASSWORD ----
CHANGE PW.
TUNING LOCK
PRESET PROG
AV LOCK
CHILD LOCK
MAX. VOLUME
UNLOCK
1. Press the LOCK button, the
screen will show as the form
on the right.
LOCK
OFF
OFF
OFF
OFF
OFF
2. Press the Direct-digit
Choosing button 0 for four
times( or inputthe password
you set), and enter the menu
of LOCK.
LOCK SET UP
PASSWORD ----
CHANGE PW.
TUNING LOCK
PRESET PROG
AV LOCK
CHILD LOCK
MAX. VOLUME
UNLOCK
OFF
OFF
OFF
OFF
OFF
3. Press CH+/-button, move
the indicator to TUNING
LOCK, then press VOL+
button to setit ON orOFF.
Direct-digit Choosing
Button
Note:
1.When theTUNING LOCK is set ON, if you wantto enter the
TUNING menu, youwill have totype the password.
CH+
2.The PRESETPROG allows youto turn onthe TV always with
one channel.
3.WhenAV LOCK is setON, AV cannot beused, hence the
screen will changeinto black andindicate that ithas been
locked. The TV set will be inthe state ofmute.
MENU
CH-
VOL+
VOL-
4.When theCHILD LOCK isset ON, ifthe buttons onthe TV
are pressed, itwill indicate thatthe TV set is inthe status of
CHILD LOCK, andthe buttons won'twork.
5.The MAXVOLUME allows youto set afigure of thetop limit of
volume.
6.The UNLOCKallows to youto set allthe lock toOFF .
Download from Www.Somanuals.com. All Manuals Search And Download.
Game
This TV set provides you with the game, after entering the game,
except the buttons that are appointed in the game( for example, the game button,
CH+/-and MODE, etc.)and the DC Stand by button, the other buttons cannot be
used.
Game control buttons and method of playing the game
Game control buttons
CH+
Used to select
the score
MENU
CH-
VOL+
VOL-
GAME
EXIT
To start/restart the game
To exit game
Used to confirm the digits
Method of playing the game
1. Press GAME button to start the game screen, then press VOL+ to
select the score of BET(1-10)( the score will decrease as much as
the value of BET). After these operation you could press VOL-
to enter the game , the digits and flag will change quickly.
2. Press VOL+ to enter after select a digit(1-8), and then the
selection of the second digit, press VOL+ again to start the
second digit selection. REACH will display on the screen if
2 is also selected; and WIN will display on the screen if 2
is selected on the third position, and the score will also display
on the screen.
3. You can press the GAME button to restart the game when it
is game over or during the process of the game.
Note WIN displays on the screen on the following condition, and the score
is as following
The three position
Score
Two 7(7 appears on two position )
Two flags
Three 7
Three flags
Three other digits except 7
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Additional Equipments
Connecting additional equipments
You can connect the DVD,VCR and stereo system to theAV output to enjoy a
higher quality of picture and sound effect.
Signal flow
White (Audio left channel)
Red (Cr and audio right channel)
Blue (Cb)
Green (Y)
Yellow (Video)
DVD, VCD or other units
Video input
Audio input
Laser DVD withoutput terminal
DVD, VCD or otherunits
Note: About the S-VIDEO
1.When receive s-video signal, you must remove video signal; when receive
video signal, you must remove s-video signal.
2.When receive side video signal, you must remove back video signal; when
receive back video signal, you must remove side video signal.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
*To assist in location possible faults use help guide below.
BREAKDOWN PHENOMENON
CHECKING
SOUND
PICTURE
The aerial direction and connection
Picture with snow
Noise
This is called ghosting which can be minimized with
an outside aerial, and good quality cable and
terminations. Altering the aerial direction can also
minimize this effect.
Normal
Double or Triple Image
Electrical interference which can be caused by cars,
motorbikes etc, Fluorescent lamps and dirty
insulators on overhead power cables.
Noise
Disturb
Volume Sound mute
No sound
Normal
Ensure that the power supply is connected to the TV
set and turned on. Also ensure that the TV set isnot in
"PICTURE MUTE" or that the brightness and contrast
are not turned down
No Picture
No sound
Adjust color control
Adjust channel again
No color
Normal volume
Scramble
Normal or Weak Volume
Colour Purity fault which can be caused by moving the
TV set, placing magnets near the TV screen or turning
on/off house hold appliances such as vacuumcleaners
near the TV set. Turn the TV off with the mains power
switch for 15 minutes.When the power isturn on again
the TV set will automatically degauss the picture. In
server cases leave the TV set turned off over night.
Color Spot
Normal volume
Note:
1.If the fault can not be repaired using the above guide consult with your local authorized service center.
2.The TV set must only be repaired by a qualified registered service person. Never attempt to remove
the back cover as the TV set has dangerous voltages in side that may cause a fatality or fire.
3. The cabinet may produce the occasional "snapping sound". This is normal and caused by the materials
in the cabinet expanding with room temperature changes.
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Color system
PAL AV NTSC3.58 NTSC4.43
BG, DK, I
Sound system
Picture tube
29 color picture tube(the viewable dimension is 68cm)
Sound output power
5W+5W
Power requirements
Power consumption
See rating plate
See rating plate
825 (W) x 470 (D) x 596 (H) (mm)
784 (W) x 389 (D) x 593 (H) (mm
29FA18
29MT1
Dimension (mm)
Working temperature: +5
Working humidity: 20%-80%
Storage temperature: -15
Storage humidity: 5%-90%
+35
+45
Environment conditions
Accessories
Remote control
Owner's manual
Battery(AAA)
X1
X1
X2
Download from Www.Somanuals.com. All Manuals Search And Download.
01
0090505219A
Download from Www.Somanuals.com. All Manuals Search And Download.
|