COLOUR TV RECEIVER
OWNER'S MANUAL
The Owner's Manual for the Follow Model:
21FA10-AM
Please read this manual carefully
before operating the unit, and keep
it for future reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Cautions
4. To prevent the TV set from firing
and electric shock, don't expose the
TV set to rain or moisture.
1. When you clean the TV set, please
pull out the power plug from AC outlet.
Don't clean the cabinet and the
screen with benzene, petrol and other
chemicals.
2. In order to prolong the using life of
the TV set, please place it on a
ventilated place.
5. Don't open the back cover,
otherwise it is possible to damage the
components in the TV set and harm
you.
6. When the TV set isn't going to be
used for long time or it is in thunder
and lightening, please pull out the
plug from AC outlet and the antenna
plug from the cover of the TV set.
3. Don't place the
TV set in the
sunshine or near
heat source.
Explanation on the display tube
In general, it is not needed to clean the tube surface. However, necessary,
it's surface can be cleaned with a dry cotton cloth after cutting off the power.
Don't use any cleanser. If using hard cloth, the tube surface will be damaged.
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Antenna connection
Generally speaking, to enjoy a clearer picture, we recommend that you use a CATV
system or an outdoor antenna .In different places, the suitable antenna type and position
are different.
300 twin-lead cable
Antenna adapter
75 coaxial cable
Mixer
additional
purchase
Antenna input
75 standard
coaxial type
Plug
(additional purchase)
AC power socket
Note
* It is recommended that you'd better use 75 coaxial cable to remove the
disturbance caused by airwave.
* Don't bind antenna cable and electric wire together.
Preparation for the remote control
Tips for remote operation
Battery installation
!
Remove the batteries cover.
!The battery life should be about one year
undernormaluse.
!
Insert two size AA batteries matching
the +/-polarities of the battery to the +/-
marks inside the battery compartment.
! When the remote control will not be used
for a long period of time or when the
batteries are worn out, remove the batteries
topreventleakage.
!
Do not throw the batteries into a fire.
Dispose of used batteries in the specified
manner.
! Do not drop, dampen or disassemble the
remotecontrol.
Download from Www.Somanuals.com. All Manuals Search And Download.
Position of Keys and Plug-ins
Front and side panel
Power indicator
Signal receiver
Power switch
Menu
TV/AV switch
Volume down/up
Channel down/up
Back panel
VIDEO2
VIDEO
L
AUDIO
R
Video Y input terminal
Video Cb input terminal
Antenna input socket
Video Cr input terminal
Audio right channelinput terminal
Audio left channelinput terminal
Video input terminal
Audio left channeloutput terminal
Audio right channeloutput terminal
Video output terminal
S-VIDEO input terminal
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Remote Control
Buttons and Descriptions
TV and AV Exchange Button
Toexchanger between TVand
other available videoinputs
TV/AV
DISP
SYSTEM
SCAN
LOCK
Mute Button
Press to conceal the sound of programs.
Screen Display Button
System Adjust Button
Direct-digit Choosing Button
Directly select channel numbers
Digit Select Button
Change the channel position number
between one digit, two-digits and three
-digits.
CALENDAR
S.STD
Picture Mode SelectButton
There are DYNAMIC, STANDARD,
MILD,MEMORY, PICTURE MUTEand
COLOR MUTE sixmodes of picture.
P.STD
Menu Select/Adjust Button
Use this buttonto adjust themenu,
the volume andthe channels, aswell
as to controlthe game.
CH+
MENU
CH-
VOL+
VOL-
Program Play-forward Button
Favorite program button
Game Background SelectButton
FM on /off button
BACK
PRE
Game Exit Button
FAVORITE SHUTTLE
No available
No available
QSET
Start/Restart Game Button
Change the aspectratio
Saving mode on/off button
Shuttle button
FM
/
ZOOM
TDX
MODE
EXIT
GAME
Program Play-backward Button
Sound Mode Select Button
Calendar
Program Scan Button
Lock Setting button
DC Standby Button
Sleep TimerButton
Download from Www.Somanuals.com. All Manuals Search And Download.
Power On and Power Off
Below are methods on how to power on/off the TV set with the switch on the TV and
on the remote control.
Power on/off
Connect/disconnect to the power
1. Connect the power supply wire, then press
power switch button, the red power indicator will
light, in several seconds the picture will appear
on the screen.
Power indicator
Signal receiver
2. If the TV is in the state of standby, press the
button on the remote control.
Power switch
Menu
TV/AV switch
NOTE
1. You can also press the 0-9
button to call off the standby
status instead of pressing the
Volume down/up
Channel down/up
DC Standby button. Press the
digit button of the preset channel
(limited to one digit) , you can
complete the selection of channel while you turn on the
TV set( To operate the preset of TV channel, please see
TUNING on page 11-14).
2. When you do not use the remote control, you can
directly press the CH+/- button on the television to
call off the standby status.
3. Press the button on the remote control
to get into the standby status.
DC Standby Button
4. Press the button on the TV set to
completely turn off the TV.
Direct-digit Choosing Button
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing TV Programs
The channels amountto 218 .
Viewing TV programs
How to select the TV program
1. Use the direct-digit choosing button
Press the button from 0-9 to select a one digit channel.
If you want to select a two-digits channel, press the
Digit Select button and change it into two-digits mode,
then press the number of the channel.
If you want to select a three-digits channel, press the
Digit Select button and change it into three-digits mode,
then press the number of the channel.
If the channel position number you select is larger than 218,
the TV will use the first two number as the channel position.
2. Use CH+/- button
Direct-digit Choosing
button
Press CH+ to increase the channel position number.
Press CH- to decrease the channel position number.
3. Use PRE button and BACK button
Press PRE button, you can go back to the channels you
viewed (as many as four).
Digit Select
button
Then, press BACK button, you can return to the channels you
were watching just now (as many as four) .
PRE
BACK
For example, if you have viewed channel 1,2,3,4,5,6 after the
TV is powered on, and the channel you are watching now is
number 7, then press PRE button, you can view channel 6,5,
4,3, and you may press the Back button to return to channel 7.
Choose the proper volume you like
Press VOL+/- button to adjust the volume.
VOLUME
SYSTEM
If the color of one channel is abnormal
It might be because the color has been
set improperly.You may follow the
instruction below toadjust it. Press
SYSTEM button, and you can see
the form.
COLOR AUTO
SOUND BG
SELECT ADJUST
CH+
If the color of the picture is abnormal
Press CH+/- button, and move the indicator to COLOR,
and press VOL+/- button to select the proper color(AUTO,
NTSC3.58,NTSC4.43 and PAL will appear alternately).
Generally, please set to AUTO.
VOL-
VOL+
MENU
CH-
If the sound is abnormal
Press CH+/- button, and move the indicator to SOUND,
and press VOL+/- button to select the proper sound.
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing TV Programs(continued)
Program scanning function is to let the television automatically scan all
preconcerted channel program(abouttwo seconds perchannel).
Program scan and screen display
Program scanning function
1. If you want to scan the programs
and select your favorite channel ,
just press the SCAN button, then
the television will start scanning
SCAN
from the present channel with a
rate of two seconds per channel
and until all the preconcerted
programs have been displayed
once, the TV set will return to the
starting channel.
2. If you want to terminate this
function during the scanning, press
the SCAN button again, and the
program will stay at the present channel.
Screen display
Usually, when you press the DISP button, the channel
DISP
number will appear on the top right corner of the screen
and press it again, the channel number will disappear
or disappear automaticallyin about 5seconds.
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing TV Programs(continued)
Saving mode.favorite program and shuttle
Saving mode
1. Using the QSET button
Press the QSET button to switch the saving mode
CH+
on/off. And the screen will display on/off at the
same time.
Press the QSET button more than 3 seconds to
call the ENERGY SAVE menu .
VOL-
VOL+
MENU
CH-
2.Press VOL+/- button and CH+/-
button to set the options of
AMBI-LUM/ AMBI-SND, after
this, select the ADJUST option
ENERGY SAVE
AMBI-LUM BRI.
AMBI-SND NOISE
ADJUST
SELECT ADJUST
and press VOL+/- button to
display OK, the set is finished.
QSET
Note: 1. After adjusting the item in the ENERGY
SAVE, the energy save function is on
automatically.
2. If the energy save mode is on, the buttons
P.STD and S.STD will not work. The screen
displays ENERGY SAVE ON.
FAVORITE
Favorite program setting
Press FAVORITE button for long time to enter the menu
as right figure. Press CH+/- button to select
FAV.POS
the favorite programand VOL+/- button to
adjust the channel. You could set 8favorite
programs.
After thesetting, press FAVORITE button
to select yourfavorite channel youhave
set .
SHUTTLE
Shuttle
Press SHUTTLE for long timeto set the program youare
watching as the shuttle channel.
If you want to back to this channel from the current
channel, press SHUTTLEbutton once .
Download from Www.Somanuals.com. All Manuals Search And Download.
FM
FM
FM
Press FM to enter and press again to exit
FM
Press CH+/- button to tune automatically
Press VOL+/- button to tune manually, press VOL+/- button
to adjust the volume if there is no FM on screen.
FM
1
Press FM to enter.
FM 106.3MHZ
FM
2 Press CH+/- button to start to
tune automatically.
SEARCHING
FM 106.3MHZ
CH+
VOL-
VOL+
MENU
CH-
3 After searching the program
the screen displays as right
figure, you could press 0 button
according the menu and
displays as right.
FM
FM 106.3MHZ
PRESS 0 KEY
TO MEMORIZE
FM
FM- 106.3MHZ
PRESS 1-9 KEY
TO MEMORIZE
4
Press 1-9 to display
FM
the menu. That means
the programs have been
stored.(take 1 for example)
FM1 106.3MHZ
MEMORIZED
Note:1. Press VOL+/- button to tune manually.
Other steps is the same as the auto tuning.
2. 9 channels could be stored.
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuning
There are three ways of searching: automatic search, manual search and MFT
(manual fine tune).
You may operate it either on the TV or on the remote control. Here is mainly about
the remote control.
Automatic search
Automatic search
1. Press MENU button
TUNING
continuously until select
TUNING menu.
POS. EDIT
POS. EX.
SEARCH
AUTO MEMORY
UP
CH+
VOL-
VOL+
MENU
CH-
2. Press CH+/- button to move
the indicator to AUTO
MEMORY.
TUNING
POS. EDIT
POS. EX.
SEARCH
UP
AUTO MEMORY
3. Press VOL+ button, then
AUTO MEMORY mode will
work. The TV set will search
automatically all available
programs, after that, all
available programs will be
stored in turn and the TV set
will return to the first channel.
ASM
U
0
STOP
If you want to stop the search, just press VOL- button.
The order of the automatic search is due to the frequency
of the program, generally speaking, it is used only at the
first time you search the program, and once the order of
the program has been confirmed, you don't have to use
this function, otherwise the order of the program will be
changed.
CH+
After searching
VOL-
VOL+
MENU
CH-
Press CH+/- button to check the channels.
If the color is abnormal in a certain channel, it may be
the color system has not been set properly, so you
should adjust it to the proper system (Reference to
page 7).
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuning(continued)
Manual search
Manual search
1. Press CH+/- button or the Direct-digit Choosing button to
select a channel directly(take channel 1 for example).
CH+
TUNING
2. Press MENU button
continuously until select
TUNING menu.
VOL-
VOL+
MENU
CH-
POS. EDIT
POS. EX.
SEARCH
UP
AUTO MEMORY
3. Press CH+/- button and move
the indicator to SEARCH.
TUNING
POS. EDIT
POS. EX.
SEARCH
UP
AUTO MEMORY
Direct-digit Choosing
Button
4. Press VOL+/- button to start
searching.
VOL- button is used to search the
lower frquency channel.
CH+
VOL+ button is used to search the
higher frequency channel.
Repeat the steps until you find
the channel you need.
VOL-
VOL+
MENU
CH-
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuning(continued)
MFT
MFT(manual fine tune)
When you can't get a satisfactory picture and audio effect,
you can fine tune to obtain.
CH+
VOL-
VOL+
MENU
CH-
1. Press MENU button
continuously until select
TUNING menu.
TUNING
POS. EDIT
POS. EX.
SEARCH
AUTO MEMORY
UP
2. Press CH+/- button to select
POS EDIT and VOL+ button to
enter.
POSITION
BAND
SKIP
1
VL
ON
UP
MFT
100.25MHZ
3. Press CH+/- button to select
POSITION and VOL+/- button to select the channel
(Take channel 1 for example)
Direct-digit Choosing
Button
Note: the same way to adjust the BAND, and VL/VH/U will
appear alternatively.
4. Press CH+/- button and move
the indicator to MFT.
CH+
POSITION
BAND
SKIP
1
VL
ON
UP
VOL-
VOL+
MENU
CH-
MFT
100.25MHZ
5. Press VOL+/- button repeatedly to fine tune, until the
picture and the sound become satisfactory.
VOL- button is used to search the lower frquency channel.
VOL+ button is used to search the higher frequency channel.
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuning(continued)
Skip
Skip
After the programs are presetted, you can skip some
programs so that to select your favorite channels only.
TUNING
1. Press MENU button
continuously until select
TUNING menu.
POS. EDIT
POS. EX.
SEARCH
AUTO MEMORY
UP
2. Press CH+/- button to select
POS EDIT and VOL+/- button to
enter.
Direct-digit Choosing
Button
3.Press CH+/- button to select
POSITION and VOL+/- button
to select the channel(Take
channel 1 for example)
POSITION
BAND
SKIP
1
VL
ON
UP
MFT
100.25MHZ
4. Press CH+/- button and move
the indicator to SKIP.
POSITION
BAND
SKIP
1
CH+
VL
ON
UP
5. Press VOL+/- button to set it
ON.
MFT
100.25MHZ
VOL-
VOL+
MENU
CH-
6. Press MENU button to close the menu. When you select
channels with CH+/- button, this channel will be skipped.
However, you can also use the Direct-digit Choosing button on
the remote control to select this channel directly.
If you want to recover the skipped channel
1. Use Direct-digit Choosing button to select the number of the
channel to be recovered.
2. Do the above steps again.
3. Press VOL+/- button to set SKIP OFF.
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Picture and the Sound
Multiple picture modes
DYNAMIC
How to select the picture mode
You may select the mode you want from the
five preset modes and one individual mode.
STANDARD
P.STD
MILD
Press the P. STD button to select a mode you
like.DYNAMIC PICTURE, STANDARD
PICTURE, MILD PICTURE, MEMORY,
PICTURE MUTE and COLOR MUTE,
totally six picture modes can be selected
alternately.
MEMORY
PICTURE MUTE
COLOR MUTE
MODE
DYNAMIC
STANDARD
MILD
PICTURE QUALITY
BRIGHT COLOR
MEDIUM COLOR AND BRIGHTNESS
LOW COLOR AND BRIGHTNESS
SET BY YOURSELF
MEMORY
PICTURE MUTE NO PICTURES
COLOR MUTE
BLACK AND WHITE PICTURE
If the picture mode is set to PICTURE MUTE or COLOR
MUTE,it will autorenew to DYNAMIC mode when you
restart your TV set with remote control.
Set the parameter of MEMORY
1. Press MENU button
continuously until select
PICTURE
ADJUST
3A FILTER
B.B
PICTURE menu, press CH+/-
button to select ADJUST and
VOL+/- button to enter.
CH+
ON
2. Press CH+/- button, move the
indicator to the option you want
to adjust, then press VOL+/-
button to do the adjustment.
Then the parameter will be
automatically stored in
VOL-
VOL+
MENU
CH-
CONTRAST
BRIGHT
COLOR
100
50
50
50
SHARP
MEMORY option.
VOL+
OPTION
VOL-
CONTRAST
BRIGHT
COLOR
STRONG
BRIGHT
THICK
WEAK
DARK
LIGHT
SOFT
SHARP
SHARP
PURPLE
TINT
GREEN
*The item of TINT appears when the N system signal is received,
and you can adjust it by VOL+/- button.
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Picture and the Sound
(continued)
Multiple Sound ModesandSettingtheSound
How to select the sound mode
You can quickly select your most favored
sound mode from the following three
kinds of modes.
Press the S.STD button to select the
sound quality that you want.LOW VOL/
NORMAL VOL/ HIGH VOL can be
selected in turn(their parameter may
be adjusted due to your need).
LOW VOL
S.STD
NORMAL VOL
HIGH VOL
Setting the sound
This function can let you regulate the volume to the
preconcerted parameter quickly( such as the LOW VOL/
NORMAL VOL/ HIGH VOL).
1. Press MENU button continuously until select
SOUND menu.
CH+
2. Press CH+/- button, move
the indicator to the HIGH
SOUND
LOW VOL
20
40
60
50
VOL, then press VOL+/-
button to adjust the parameter
you expect. With the same
method, you can adjust the
parameter of the LOW VOL
and NORMAL VOL.
NORMAL VOL
HIGH VOL
BALANCE
VOL-
VOL+
MENU
CH-
Suppose the LOW VOL is A, NORMALVOL is B, HIGH VOL
is C, they should be: 0 100
A
B
C
You should adjust themin the sequenceof HIGH VOL,
NORMAL VOLand LOW VOL.
S.STD
3. Press the S.STD button repeatedly to select the
different sound setting modes.
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Picture and the Sound
(continued)
S.C.C, auto off and mute
How to use the S.C.C(soft change channel)
This TV set provides you with the function of S.C. C.
When it is set "ON", the picture will fade in and fade
out when the channel is changed.
FUNCTION
1. Press MENU button
continuously until select
FUNCTION menu.
CH+
AUTO OFF ON
S.C.C
CURTAIN
3A OPT
OFF
III
OFF
VOL-
VOL+
MENU
CH-
2. Press CH+/-button, move
the indicator to the S.C.C,
then press VOL+/-button to
set it ONor OFF.
Auto off
Toprevent from forgettingto turn off the TV, this TV
could turn off automatically. That is , if the off timer is
set on and after two hours without any operation, this
TV will switchinto standby modeautomatically to
save your energy.
How to use the MUTE function
When you want to pay attention to the environment or
answer a telephone, or to meetguests, using themute
function is veryconvenient.
1. Press
button, a sign will
appear at the bottom center
of the screen, and the sound of
the TV set is cutoff.
2. In order to recover the sound, press button again
or press VOL+/-button.
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the other Function
3A filter and screen protection
How to use the 3A filter function
1.Press MENU button
PICTURE
ADJUST
continuously until select
the PICTURE menu. Then
press CH+/- buttonto move
the indicator to 3AFILTER,
and press VOL+/-button to
enter
3A FILTER
B.B
ON
CH+
VOL-
VOL+
MENU
CH-
2.Press CH+/- button to move
the indicator to the item you
want to adjust and then
3A FILTER USER
2500K
3300K
5600K
6500K
7300K
8500K
9300K
-----I-----
-----I-----
-----I-----
-----I-----
-----I-----
-----I-----
-----I-----
VOL+/- button to adjust it .
12000K -----I-----
15000K -----I-----
SELECT
ADJUST
Note: FILTER can switch USER, STANDARD,6500K,
7300K, 8500K and 9300K in cycle, and the color
temperature changes when you switch.
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Timer
This TV set provides you with three timer functions such as timer on, timer off
and sleep off.
Timer off
Timer off
Using this function can turn the TV set automatically
into standby status at the preconcerted time.
1. Press MENU button continuously
until select TIMER menu,
press CH+/- button to select
CLOCK and VOL+/- button to
set the time. (it will be the
standard of the clock of ON/
OFF TIMER.)
TIMER
CLOCK 0:00
OFF TIMER 0:00
ON TIMER
ON POS
OFF
0
CH+
APP.TIME
APP. POS
OFF
0
VOL-
VOL+
MENU
CH-
2. Press CH+/- button, move
the indicator to OFF TIMER,
then press VOL+/- button to
set the time.
TIMER
CLOCK
OFF TIMER 0:00
0:00
ON TIMER
ON POS
OFF
0
APP.TIME
APP. POS
OFF
0
CH+
VOL-
VOL+
MENU
CH-
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Timer (continued)
Sleep timer and on timer
Sleep timer
Using this function, the TV set can be changed into the
standby status after a period of preset time from when
this function is activated.
1. The utmost time for this function is
120 minutes, and the time interval is
10 minutes.There are totally 12 kinds
of off-time.
2. Press the
button repeatedly,
the screen will show in turn as the
right form.
On Timer
When this function is used, the TV set can
automatically turn the power on at the preset time in
the standby statusand display thepreset program.
1. Press MENU button continuously
until select TIMER menu.
CH+
TIMER
CLOCK
OFF TIMER 18:20
ON TIMER OFF
ON POS
APP.TIME
APP. POS
18:00
2. Press CH+/- button to select
CLOCK and VOL+/- button to
set the time. (it will be the
standard of the clock of ON/
OFF TIMER.)
VOL-
VOL+
MENU
CH-
0
OFF
0
TIMER
3. Press CH+/-button, move
the indicator to ON TIMER.
Then, press VOL+/-button to
set the time. (The method is
the same asOFF TIMER.)
CLOCK
18:00
OFF TIMER 18:20
ON TIMER 19:00
ON POS
APP.TIME
APP. POS
0
OFF
0
CH+
4. Press CH+/-button, move
the indicator toON POS,
press VOL+/- button to set
the channel with which the
TV is turned on(take 1 for
example).
TIMER
VOL-
VOL+
MENU
CH-
CLOCK
18:00
OFF TIMER 18:20
ON TIMER 19:00
ON POS
APP.TIME OFF
APP. POS
1
0
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Timer (continued)
The channels appointment function can help you conveniently preset as many
as six programs at a time. At the preset time, the TV set will automatically
change to thepreconcerted channel. Iftwo or moreprograms are setin a same
time, the last channel number will be selected.
Channels appointment
Channels appointment
1. Press MENU button
continuously until select
TIMER
CLOCK 18:00
OFF TIMER 18:20
ON TIMER
ON POS
APP.TIME OFF
TIMER menu, press CH+/-
button to select CLOCK and
VOL+/- button to set the time.
(The method is the same as
OFF TIMER. It is the standard
of the clock of APP. POS)
CH+
19:00
1
APP. POS
0
VOL-
VOL+
MENU
CH-
2. Press CH+/-button, move
the indicator toAPP.TIME.
Then press VOL+/-button to
set the time(the method is the
same as OFFTIMER ).
TIMER
CLOCK
OFF TIMER 18:20
18:00
ON TIMER
ON POS
19:00
1
APP.TIME
APP. POS
19:30
0
Repeatedly press VOL+/- button,
the time changes with a rate of
one minute;
Press the button without
releasing, the time changes with
a rate of ten minutes.
CH+
3. Press CH+/- button, move
the indicator to APP.POS.
TIMER
CLOCK
OFF TIMER 18:20
VOL-
VOL+
MENU
CH-
18:00
ON TIMER
ON POS
19:00
1
4. Press VOL+/- button to set
the channel number you want
(e.g. 100).
APP.TIME
APP. POS
19:30
100
At the presettime, the TV set willautomatically change
to the preconcertedchannel;
DISP
This function is available onlywhen the TV set ison, and
it cannot beused in thestatus of standbyor power off.
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Function
Background
Background selection
If no signal has been received
by the TV set,when theB.B
function is set ON, the screen
will change into the form on
the right shows.
CH+
VOL-
VOL+
MENU
CH-
PICTURE
ADJUST
Press MENU button
continuously until select
the PICTURE menu. Then
press CH+/- buttonto move
the indicator to B.B, and
press VOL+/- button to set it
ON.
3A FILTER
B.B
ON
SELECT
ADJUST
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the other Function(continued)
Curtain function,calendar display
How to use the Curtain function
This TV set provides three types of Curtain function
for you toselect.
1. Press MENU button
continuously until select
FUNCTION menu.
CH+
FUNCTION
AUTO OFF ON
S.C.C
CURTAIN
3A OPT
OFF
I
OFF
VOL-
VOL+
MENU
CH-
2. Press CH+/- button, and
move the indicatorto
CURTAIN, then press VOL+/-
button to select from I, II
to III.
I: curtain
II : fade in and fade out
III: mixed Iand II
Note:You can select 3AOPT ON or OFF, when you select
ON, the color enhances.
How to use the calendar function
CALENDAR
This TV set has been designed to store the calendar
from the year 1901 to 2050.
1. Press the CALENDAR button
AUG 2006
and then the calendar will
SU
MO
TU
WE TH
FR
SA
appear on the screen(Press the
CALENDAR button again to
conceal the display), the display
time is 10s.
CH+
VOL-
VOL+
MENU
CH-
2. Press CH+/- button to adjust
the YEAR, press VOL+/- button
to adjust the MONTH.
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the other Function(continued)
The function of channel exchange will enable you to exchange any two programs
and you can conveniently adjust the order of the programs due to your own need.
Channel exchange
Channel Exchange
for example, to change between channel1 and 9
1. Press MENU button
continuously until select
TUNING menu.
TUNING
CH+
POS. EDIT
POS. EX.
SEARCH
AUTO MEMORY
UP
VOL-
VOL+
MENU
CH-
2. Press CH+/- button, move
the indicator to POS.EX.,
Then press VOL+ button to
enter the sub-menu.
EX.POS1
EX.POS2
EXCHANGE
RETURN
1
1
?
3. Press CH+/- button, move
the indicator to EX.POS1,
then press VOL+/- button to
set the channel number to 1.
4. Press CH+/- button, move
the indicator to EX.POS2,
then press VOL+/- button to
set the channel number to 9.
EX.POS1
EX.POS2
EXCHANGE
RETURN
1
9
?
Direct-digit Choosing
Button
CH+
5. Press CH+/- button, move
the indicator to EXCHANGE,
then press VOL+/- button to
confirm. Then the programs
of the two channel will be
exchanged.
VOL-
VOL+
MENU
CH-
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Lock
This TV set provides you with the LOCK function, you can choose it due to your
need to protectyour TV set.
Changing your password
Changing your password
This TV set can set a four digit password, the original
one is 0000, if you want to reset it, please follow the
instructions below.
LOCK
LOCK SET UP
PASSWORD ----
CHANGE PW.
TUNING LOCK
PRESET PROG.
AV LOCK
1. Press LOCK button, the
screen will showas the form
on the right.
OFF
OFF
OFF
OFF
OFF
CHILD LOCK
MAX. VOLUME
UNLOCK
CH+
2. Press the 0 button for four
times, and enter the menu of
LOCK setting. PressCH+/-
button and move the indicator
to CHANGE PW. , and press
VOL+ button to enter the
LOCK SET UP
PASSWORD ----
CHANGE PW.
TUNING LOCK
PRESET PROG.
AV LOCK
CHILD LOCK
MAX. VOLUME
UNLOCK
VOL-
VOL+
MENU
CH-
OFF
OFF
OFF
OFF
OFF
sub-menu of CHANGEPW.
3. Press the Direct-digit
Choosing button and input a
four-digits password.
CHANGE PW.
NEW PW.
----
4. After inputting the new
password, return to the
original status as shown on
the right form, then, you can
input the newpassword to
enter the menuof LOCK.
LOCK SET UP
PASSWORD ----
CHANGE PW.
TUNING LOCK
PRESET PROG.
AV LOCK
CHILD LOCK
MAX. VOLUME
UNLOCK
Direct-digit Choosing
Button
OFF
OFF
OFF
OFF
OFF
Note: After changing the
password, please remember
the new password, or you can
not use this function in future.
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Lock(continued)
Setting the Lock
Setting the Lock
There are TUNING LOCK, PRESET PROG. ,AV LOCK,
CHILD LOCK and MAX.VOLUME five lock setting, you
can set it due to your need.
LOCK SET UP
PASSWORD ----
CHANGE PW.
TUNING LOCK
PRESET PROG.
AV LOCK
CHILD LOCK
MAX. VOLUME
UNLOCK
1. Press the LOCK button, the
screen will show as the form
on the right.
LOCK
OFF
OFF
OFF
OFF
OFF
LOCK SET UP
PASSWORD ----
CHANGE PW.
TUNING LOCK
PRESET PROG.
AV LOCK
CHILD LOCK
MAX. VOLUME
UNLOCK
2. Press the Direct-digit
Choosing button 0 for four
times( or inputthe password
you set), and enter the menu
of LOCK.
OFF
OFF
OFF
OFF
OFF
LOCK SET UP
PASSWORD ----
CHANGE PW.
TUNING LOCK
PRESET PROG.
AV LOCK
CHILD LOCK
MAX. VOLUME
UNLOCK
3. Press CH+/-button, move
the indicator to TUNING
LOCK, then press VOL+
button to setit ON orOFF.
Direct-digit Choosing
Button
OFF
OFF
OFF
OFF
OFF
Note:
1.When theTUNING LOCK is set ON, if you wantto enter the
TUNING menu, youwill have totype the password.
CH+
2.The PRESETPROG allows youto turn onthe TV always with
one channel.
VOL-
VOL+
MENU
CH-
3.WhenAV LOCK is setON, AV cannot beused, hence the
screen will changeinto black andindicate that ithas been
locked. The TV set will be inthe status ofmute.
4.When theCHILD LOCK isset ON, ifthe buttons onthe TV
are pressed, itwill indicate thatthe TV set is inthe status of
CHILD LOCK, andthe buttons won'twork.
5.The MAXVOLUME allows youto set afigure of thetop limit of
volume.
6.The UNLOCKallows you toset all thelock to OFF.
Download from Www.Somanuals.com. All Manuals Search And Download.
Game
This TV set provides you with the game, after entering the game,
except the buttons that are appointed in the game( for example, the game button,
CH+/-and MODE, etc.)and the DC Stand by button, the other buttons cannot be
used.
Game control buttons and method of playing the game
Game control buttons
CH+
MODE
Used to select
the score
VOL-
VOL+
MENU
CH-
To select the background
when playing game
GAME
EXIT
To start/restart the game
To exit game
Used to confirm the digits
Method of playing the game
1. Press GAME button to start the game screen, then press VOL+ button to
select the score of BET(1-10)( the score will decrease as much as
the value of BET). After these operation you could press VOL-
button to enter the game , the digits and flag will change quickly.
2. Press VOL+ button to enter after select a digit(1-8), and then the
selection of the second digit, press VOL+ button again to start the
second digit selection. REACH will display on the screen if
2 is also selected; and WIN will display on the screen if 2
is selected on the third position, and the score will also display
on the screen.
3. You can press the GAME button to restart the game when it
is game over or during the process of the game.
Note WIN displays on the screen on the following condition, and the score
is as following
The three position
Score
Two 7(7 appears on two position )
Two flags
Three 7
Three flags
Three other digits except 7
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Additional Equipments
Connecting additional equipments
You can connect the DVD,VCR and stereo system to theAV output to enjoy a
higher quality of picture and sound effect.
Signal flow
White (Audio left channel)
Red (Cr and audio right channel)
Blue (Cb)
Green (Y)
Yellow (Video)
DVD, VCD or other units
3
Audio output
Video output
Laser DVD withoutput terminal
DVD, VCD or otherunits
Note: About the S-VIDEO
1.When receive s-video signal, you must remove video signal; when receive
video signal, you must remove s-video signal.
2.When receive side video signal, you must remove back video signal; when
receive back video signal, you must remove side video signal.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
*To assist in location possible faults use help guide below.
BREAKDOWN PHENOMENON
CHECKING
SOUND
PICTURE
The aerial direction and connection
Picture with snow
Noise
This is called ghosting which can be minimized with
an outside aerial, and good quality cable and
terminations. Altering the aerial direction can also
minimize this effect.
Normal
Double or Triple Image
Electrical interference which can be caused by cars,
motorbikes etc, Fluorescent lamps and dirty
insulators on overhead power cables.
Noise
Disturb
Volume Sound mute
No sound
Normal
Ensure that the power supply is connected to the TV
set and turned on. Also ensure that the TV set isnot in
"PICTURE MUTE" or that the brightness and contrast
are not turned down
No Picture
No sound
Adjust color control
Adjust channel again
No color
Normal volume
Scramble
Normal or Weak Volume
Colour Purity faultwhich can becaused by movingthe
TV set, placingmagnets near theTV screen orturning
on/off house holdappliances such asvacuumcleaners
near the TVset. Turnthe TV off with themains power
switch for 15minutes. When thepower is turnon again
the TV setwill automatically degaussthe picture. In
server cases leavethe TV setturned off overnight.
Color Spot
Normal volume
Note:
1.If the fault can not be repaired using the above guide consult with your local authorized service center.
2.The TV set must only be repaired by a qualified registered service person. Never attempt to remove
the back cover as the TV set has dangerous voltages in side that may cause a fatality or fire.
3. The cabinet may produce the occasional "snapping sound". This is normal and caused by the materials
in the cabinet expanding with room temperature changes.
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
*The specifications offered you here are only for reference and, with the improvement
of the products ,there may be some different between the description and the practicality.
Specifications
Color system
Sound system
Picture tube
PAL AV NTSC3.58 NTSC4.43
BG DK
21 color picture tube(the viewable dimension is 51cm)
3W
Sound output power
Power requirements
Power consumption
See rating plate
See rating plate
Dimension (mm)
640(W) x 339(D) x 455 (H) (mm)
Working temperature: +5
Working humidity: 20%-80%
Storage temperature: -15
Storage humidity: 5%-90%
+35
+45
Environment conditions
Remote control
Owner's manual
Battery(AA)
X1
X1
X2
Accessories
NOTE
Design and specifications are subject to change without notice.
The dimension in this manual is an approximation.
Download from Www.Somanuals.com. All Manuals Search And Download.
01
0090505538
Download from Www.Somanuals.com. All Manuals Search And Download.
|