Haier TV DVD Combo 5115DVD User Manual

USER MANUAL  
5115DVD  
51cm TV / DVD Combination  
Please read this manual carefully  
before using this TV set and keep it  
for future reference.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warning and cautions  
1. When you clean the TV set, please 4. Do not place the TV set near rain or  
pull out the power plug from AC outlet.  
Don't clean the cabinet and the  
screen with petrol, paraffin or other  
powerful solvents. Permanent damage  
will result !  
moisture as it may cause an electric  
shock, or the TV set to catch fire. The  
TVsetmustonly  
beusedindryin  
door locations.  
2. In order to prolong the life of the  
product, please use in a well  
5. The back cover must only be  
removed by a registered electrical  
service person. Removing the back  
cover may result in electric shock, fire  
or damage to  
Leave a 10cm gap  
ventilated location.  
around it. Do not  
obstruct air flowwith  
soft furnishings  
the TV set.  
above or beneath.  
6. If the TV set is not going to be used  
for a long time, or there is a severe  
thunder & Lighting storm, we  
recommended that the TV set be  
disconnected you disconnect the TV  
set from the AC power outlet and  
remove the aerial plug.  
3. Don't place the  
TV set in direct  
sunlight or near a  
heatsource.  
Cleaning the tube  
If the picture tube require cleaning, disconnect the power and use a dry  
soft cotton cloth. Do not use any cleaner or abrasive cloths.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Aerial Connection  
If the picture is not clear or snowy, we recommend that you use an outdoor  
aerial.In different places, the suitable antenna type and position are different.  
300 twin-lead cable  
Antenna adapter  
(Not supplied)  
75 coaxial cable  
Aerial input  
75 standard  
coaxial type  
Plug  
(Not supplied)  
AC power socket  
Note:  
* It is recommended that a 75 ohm coaxial antenna is used to avoid  
interference.  
*To avoid interference from electrical signals, do not bind the antenna  
cable together with any mains lead.  
Preparation for the remote control  
Battery installation  
Tips for remote operation  
!When the remote control will not be used  
for a long period of time or when the  
batteries are worn out, remove the  
batteries to prevent leakage.  
!
!
Remove the battery cover.  
Insert two size AA batteries matching  
the +/-polarities of the battery to the +/-  
marks inside the battery compartment. ! Do not throw the batteries into fire.  
Dispose of used batteries at your local  
recycling centre.  
!
Do not drop, dampen or disassemble  
the remote control.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Function Buttons and External Sockets  
Front panel the TV set  
Stop  
Rear panel of the TV set  
COAXIAL  
COAXIAL  
Antenna input socket  
Audio right channeloutput terminal  
Video output terminal  
OUT  
Video input terminal  
Audio left channeloutput terminal  
Audio right channelinput terminal  
IN  
L
R
VIDEO  
AUDIO  
Audio left channelinput terminal  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Remote Control  
Buttons on the remote control  
Stand By  
DVD Open/close  
Calendar  
POWER CALENDAR TIME OPEN/CLOSE  
Scan  
SCAN  
SWAP  
CALL  
MUTE  
TV Time Menu  
Mute  
Former Program  
Call Screen Display  
Program Number  
(Not available)  
TV/AV Exchange  
Digital Selector  
TV/DVD  
1
5
9
2
6
0
3
7
4
8
TV/AV  
-/--  
TV/DVD  
P+  
Volume/Channel Selection  
MENU  
MENU  
V-  
V+  
Exit Screen Display  
Picture Mode  
EXIT  
P.STD  
P-  
DVD STOP  
STOP  
REV  
PAUSE/STEP  
SETUP  
(Not available)  
DVD SETUP  
FWD  
PREV  
NEXT  
DVD PAUSE/STEP  
DVD FAST REVERSE  
DVD FAST FORWARD  
DVD MENU  
D.MENU  
A-B  
REPEAT  
SLOW  
PLAY/ENTER  
DVD NEXT  
DVD PREVIOUS  
DVD REPEAT  
DVD PLAY/ENTER  
DVD A-B REPEAT  
DVD Cursor Move button  
TITLE/PBC SEARCH  
ANGLE  
AUDIO PROGRAM ZOOM  
D.CALL  
H.LOCK  
UP  
SLEEP  
SUBTITLE  
LEFT  
RIGHT  
10+  
DVD SLOW  
DVD ANGLE  
DVD SEARCH  
DVD Audio  
DOWN  
DVD TITLE  
DVD PROGRAM  
DVD CALL  
DVD SUBTITLE  
Zoom  
DVD 10+  
Child Lock  
TV Sleep button  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Switching on/ off the TV set  
This section explains the use of the power button and remote handset  
to turn your unit on and off.  
Switching the TV set on/ off  
Switching the TV set on/ off  
1 Press the AC power switch on the front of the  
TV. The power indicator will light.  
2 If the indicator is lighting in red, press the button  
on the remote control again.  
Note  
1 When you can't operate the TV set with a  
remote control, you can turn it on by pressing  
the P+/- buttons on the TV set (Child Lock must  
be turned off).  
4
AUTO  
BG  
2 If you want to change to standby mode,  
POWER  
press down the button  
on the remote  
control. Press again to switch back on.  
3 If you want to fully switch off the power supply  
for the TV set, please press the power switch  
button on the front panel.  
Auto switch off function  
If transmissions are finished for the day, the  
Automatic Power Off feature will put the TV to  
standby automatically. The Automatic Power  
Off feature will not operate in AV mode or  
when the background is set to off (see page  
19).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Watching TV  
You can watch a TV program on a channel which has been tuned to a broadcast.  
Watching TV programs  
How to select TV program  
Select the desired program  
1 Using number buttons  
Directly enter thechannel number withthe numeric keypad  
on the remotecontrol.  
1
5
9
2
6
0
3
7
4
8
To select channel numbersbetween 10 ~99 press [-/--]button  
and enter thetwo digit channelnumber  
To select channel numbersbetween 100 ~218 press [-/--]button  
twice and enterthe 3 digitchannel number  
2 Using the P+/- buttons  
Press the P+button to increasechannel number.  
Press the P-button to decreasechannel number.  
P+  
Select the desired sound  
MENU  
Press the V-/+ buttons on the remote or the front of the  
TV set to adjust the volume level. The range is 0~100. When  
the volume buttons are pressed the volume level is  
displayed automatically on the TV screen.  
V-  
V+  
P-  
How to select the menu  
Press the MENUbutton and  
the menus willappear at the  
bottom of thescreen. The  
PIC icon willinitially be  
flashing. Each subsequent  
press of themenu button  
P+  
MENU  
V-  
V+  
P-  
will highlight SOU(sound),  
FUN (function), TUN  
(tuning) icons respectively.  
Press the P-button to display  
the appropriate menu.PressEXIT to exit.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Watching TV continued  
Press the SWAP button to select the channel you were watching previously.  
Auto scan function scans through all programs in memory including those with  
"skip" set to "off" (see "Program skip"on page 13).  
Program swap and auto scan functions  
Program swap  
Press the SWAP button to  
18  
select the channel you were  
AUTO  
watching previously.  
BG  
8
SWAP  
AUTO  
BG  
18  
AUTO  
BG  
Auto program scan  
1 Press the SCAN button to  
scan through all the memorised  
TV programs. The scan will  
pause for about 2 seconds on  
each channel.  
SCAN  
1
AUTO  
BG  
BROWSE  
2
BROWSE  
3
BROWSE  
1
AUTO  
BG  
BROWSE  
2 If you want to stop the  
function during auto tunning,  
simply press the SCAN button  
again.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Searching channel  
This TV set has three methods to set the channels, which are respectively full  
automatic, semi automatic and manual fine tune.  
-
In this section, how to use the remote control to set the channel is explained. You  
can also use the buttons on the TV set to set channel.  
Full automatic mode  
Automatic search  
1 Press the MENU button. The  
MAIN MENU will appear with the  
PIC (picture) icon flashing. Press  
the MENU button a further 3 times  
until the TUN (tuning) icon is  
flashing.Press P- to enter the  
TUNING menu.  
PROG NO  
ORGANISE  
SEARCH  
FINE TUNE  
AUTO SEARCH  
P+  
MENU  
V-  
V+  
P-  
2 Press the P+/- buttons to  
select "AUTO SEARCH".  
PROG NO  
ORGANISE  
SEARCH  
FINE TUNE  
AUTO SEARCH  
3 Press the V+ button to  
start automatic search function  
operates. All channels that are  
locally available will be preset in  
the order that they are found.  
Depending in which location you  
are, this is generally not in the  
order you expect. Please see  
Page 21 (Organise).  
P+  
AUTO SEARCH  
152.25MHz  
MENU  
V-  
V+  
P-  
CALL  
Display function  
Press the CALL button, then  
the channel number and the  
systems will be displayed on  
the screen.  
3
AUTO  
I
Download from Www.Somanuals.com. All Manuals Search And Download.  
Searching channel  
Continued  
Semi-automatic search  
Semi-automatic search  
1 Press the P+/- buttons or the  
PROGRAMME NUMBER (0-9) to  
choose the desired channel  
(e.g. Channel 1).  
1
AUTO  
BG  
P+  
2 Press the MENU button. The MAIN MENU will appear  
with the PIC (picture) icon flashing. Press the MENU button  
a further 3 times until the TUN (tuning) icon is flashing.  
Press P- to enter the TUNING menu.  
MENU  
V-  
V+  
P-  
3 Press the P+/- buttons to  
select "SEARCH".  
PROG NO  
ORGANISE  
SEARCH  
P+  
FINE TUNE  
AUTO SEARCH  
4 Press the V- button to  
search downwards or the V+  
button to search upwards.  
MENU  
V-  
V+  
P-  
6
SEARCH  
152.25MHz  
To turn off the on-screen menu  
EXIT  
In general, after you press the MENU button, the menu item  
display (PIC, SOU,FUN,TUN) will automatically disappear  
within 30 seconds. If you want to eliminate these contents  
immediately, please press the EXIT button.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Searching channel  
Continued  
Manual fine tune  
Manual fine tune  
If the picture and/or sound are poor, try using the FINE  
TUNE feature. Do not use this feature unless  
reception is poor.  
1 Press the P+/- buttons or  
PROGRAM NUMBER 0-9  
button to choose the desired  
channel (e.g. channel 1).  
1
P+  
AUTO  
BG  
MENU  
V-  
V+  
P-  
2 Press the MENU button. The MAIN MENU will appear  
with the PIC (picture) icon flashing. Press the MENU  
button a further 3 times until the TUN (tuning) icon is  
flashing.Press P- to enter the TUNING menu.  
3 Press the P+/- buttons to  
select " FINE TUNE".  
PROG NO  
ORGANISE  
SEARCH  
FINE TUNE  
AUTO SEARCH  
P+  
MENU  
V-  
V+  
4 Use the V-/+ buttons to  
5
P-  
manually fine tune the station  
until the best picture and sound  
are obtained.  
FINE TUNE  
152.25MHz  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Searching channel  
Continued  
Program skip  
Program skip  
Channels can be set so that they are skipped during  
program selection.  
1 Press the P+/- buttons or  
PROGRAM NUMBER 0-9  
button to choose the desired  
channel (e.g. channel 1).  
1
P+  
AUTO  
BG  
MENU  
V-  
V+  
P-  
2 Press the MENU button. The MAIN MENU will appear  
with the PIC (picture) icon flashing. Press the MENU  
button a further 3 times until the TUN (tuning) icon is  
flashing.Press P- to enter the TUNING menu.  
P+  
3 Press the P+/- buttons to  
select "SKIP".  
MENU  
V-  
V+  
SKIP  
4 Press the V-/+ buttons to  
turn the SKIP function "ON".  
PROG NO  
ORGANISE  
SEARCH  
P-  
FINE TUNE  
5 Press the EXIT button to close  
the menu. When you use the P+/-  
buttons to select channel, this  
channel will be skipped. However,  
you can still use the PROGRAM  
NUMBER buttons to select the  
skipped channel numbers.  
If you want to recover the skipped channel  
P+  
1 Use the PROGRAM NUMBER buttons to select the channel  
number to be recovered.  
2 Repeat steps 1-3 above.  
MENU  
V-  
V+  
3 Press the V-/+ buttons to turn the SKIP function "OFF".  
P-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Convenient picture and sound control functions  
Multiple picture modes  
How to select picture modes  
You can quickly select the desired picture mode from  
four preset modes and one customized mode.  
Press the P.STD button to select the desired  
STANDARD  
P.STD  
RICH  
picture quality. Five kinds of picture modes  
(i.e., "STANDARD","RICH", "USER","LISTEN",  
"SOFT" ) can be selected in turn.  
USER  
LISTEN  
SOFT  
The 5 modes are  
Listen-This is a new feature that blacks out  
the TV screen when listening to music only channels;  
Soft-Designed for night time low light viewing;  
Standard -Designed for rooms that have good all round  
lighting;  
Rich-Designed for rooms with high ambient lighting such  
as daytime sport;  
User-A spare setting that can be adjusted to personal  
tastes.  
How to customize your own picture status  
1 Press the MENU button. The MAIN MENU will appear with  
the PIC (picture) icon flashing.Press P- to enter the PICTURE  
menu.  
P+  
MENU  
V-  
V+  
P-  
CONTRAST  
BRIGHTNESS  
COLOR  
SHARPNESS  
2 Press the P+/- buttons to select the item to adjusted, then press  
the V-/+ buttons to obtain the desired effect.  
I T E M  
Press V-  
Press V+  
Strong  
Weak  
P+  
Bright  
Dark  
MENU  
V-  
V+  
Deep  
Shallow  
Soft  
Sharp  
P-  
lean to green  
lean to purple  
Note:The "Hue" item only appears when the colour system is NTSC.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Convenient picture and sound control functions  
Continued  
Black Stretch Automatically increases the contrast range  
Noise Reduce Picture Noise & Grain Reduction Circuit. (Use only on poor reception)  
Black stretch and noise reduce  
How to select BLACK STRETCH  
1Press the MENU button. The  
MAIN MENU will appear with the  
PIC (picture) icon flashing.Press  
BACKGROUND  
the MENU button a further 2  
ON  
BLACK STRETCH  
NOISE REDUCE  
FADE  
times until the FUN (function)  
icon is flashing.Press P- to  
enter the FUNCTION menu.  
P+  
AVL  
MENU  
V-  
V+  
P-  
2 Press the P+/- button to select "BLACK STRETCH".Press the  
V-/+ buttons to turn it "ON" or "OFF".  
How to select NOISE REDUCE  
1Press the MENU button. The MAIN  
MENU will appear with the PIC  
(picture) icon flashing.Press the  
P+  
BACKGROUND  
MENU button a further 2 times until  
BLACK STRETCH  
the FUN (function) icon is flashing.  
NOISE REDUCE  
MENU  
V-  
V+  
Press P- to enter the FUNCTION  
menu.  
FADE  
AVL  
P-  
2 Press the P+/- buttons to select "NOISE REDUCE".Press the  
V-/+ buttons to turn it "ON" or "OFF".  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Convenient picture and sound control functions  
Continued  
Mute and Fade  
Sound mute  
1 Press the MUTE button on the  
remote control to turn off the  
sound. MUTE will appear on the  
top left of the display.  
MUTE  
MUTE  
2 Press MUTE again to turn the  
sound back on.  
Fade  
When FADE is turned on, the TV will protect the tube by  
fading the picture in when the TV is switched on, and  
fading the pictureout when theTV is switched off.  
1Press the MENU button.  
The MAIN MENU will  
P+  
FUN  
appear with the PIC (picture)  
BACKGROUND  
icon flashing. Press the  
MENU  
V-  
V+  
BLACK STRETCH  
MENU button a further 2  
times until the FUN  
(function) icon is flashing.  
NOISE REDUCE  
FADE  
AVL  
P-  
Press P- to enter the  
FUNCTION menu.  
P+  
2 Press the P+/- buttons to select FADE.  
MENU  
V-  
V+  
3 Press the V-/+ button to turn the FADE function "ON" or "OFF"  
.
P-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Time functions  
Clock setting and timer on/off functions  
Clock setting  
The clock will only work if the TV set if left turned on  
or in standby. When the set is disconnected from the  
power supply or is turned off by the main power on  
the front panel, the clock losespower and will need to  
be reset when the power is reconnected.  
TIME  
1 Press the TIME button, and the  
TIME menu appears on the  
screen.  
P+  
TIME  
CLOCK  
17:18  
18:00  
1
--:--  
0
2 Press the P+/- buttons select  
"CLOCK", then press the V -/+  
buttons to adjust the time in  
hour position; press again the  
P+/- buttons to select the time  
in minute position, then press  
the V-/ +buttons to adjust the  
value of minutes .  
ON TIME  
ON PROG  
OFF TIME  
SLEEP TIME  
REMIND TIME  
REMIND PROG  
MENU  
V-  
V+  
P-  
--:--  
1
On/off timer  
On-off time setting is cleared after timer operates.  
TIME  
Using on/off timer function, the TV set can automatically  
turn on to a preset program or shut down at a preset time.  
1 Press the TIME button, and  
the TIME menu display on the  
screen.  
TIME  
CLOCK  
ON TIME  
ON PROG  
OFF TIME  
SLEEP TIME  
REMIND TIME  
REMIND PROG  
17:18  
18:00  
1
--:--  
0
2 Press the P+/- buttons to  
select "ON TIME", then press  
the V-/+ buttons to set the value  
in hour position; press again  
theP+/- buttons to select the  
minute position and set the  
value of the minute(take 18:00  
as an example).  
P+  
--:--  
1
MENU  
V-  
V+  
P-  
3 Press the P+/- buttons to  
TIME  
CLOCK  
ON TIME  
ON PROG  
OFF TIME  
SLEEP TIME  
REMIND TIME  
REMIND PROG  
17:18  
18:00  
8
23:00  
0
select "ON PROG", then press  
the V-/+ or program number  
buttons to select your desired  
channel (take 8 as an example).  
--:--  
1
4 Repeat step 1-2 to set OFF  
TIME(take 23:00 as an example).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Time functions  
Continued  
Sleep timer and program preset  
Sleep timer  
The sleep timer switches the set  
0
to stand-by after the sleeptime  
has elapsed. Sleep time can be  
set in 10minute intervals upto  
180 minutes, as shown in the  
illustration. Setting the sleep  
time to zero turns off the sleep timer.  
10  
20  
TIME  
170  
180  
1 Press the TIME button, and the  
TIME menu appears on the  
screen.  
TIME  
CLOCK  
ON TIME  
ON PROG  
OFF TIME  
SLEEP TIMER  
REMIND TIME  
REMIND PROG  
2 Press the P+/- buttons to  
select "SLEEP TIMER".  
P+  
17:18  
18:00  
8
23:00  
120  
--:--  
1
MENU  
V-  
V+  
3 press the V-/+ buttons to set  
the value of the SLEEP TIMER.  
P-  
REMIND PROG function  
Program remind timer, that can automatically changechannel  
when a program on a different channel is due to start.  
TIME  
1 Press the TIME button, and the  
TIME menu display on the  
screen.  
TIME  
CLOCK  
ON TIME  
ON PROG  
OFF TIME  
SLEEP TIMER  
REMIND TIME  
REMIND PROG  
17:18  
18:00  
8
23:00  
120  
19:00  
1
2 Press the P+/- buttons to  
select "REMIND TIME", then  
press the V-/+ buttons to set  
the value in hour position;  
press again the P+/- buttons to  
select the minute position, and  
then set the value of the  
minute(take 19:00 as an  
example).  
P+  
MENU  
V-  
V+  
3 Press the P+/- buttons to  
select "REMIND PROG", then  
press the V-/+ buttons or the  
program direct number buttons  
to set the desired channel  
(take 18 as an example).  
TIME  
CLOCK  
ON TIME  
ON PROG  
OFF TIME  
SLEEP TIMER  
REMIND TIME  
REMIND PROG  
P-  
17:18  
18:00  
8
23:00  
120  
19:00  
18  
NOTE: For REMIND PROG to  
operate CHILD LOCK must be  
turned off.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Set up function  
Screen saver and Calendar  
How to start screen saver function  
When the background  
function is ON a bouncing  
'NO SIGNAL' will be  
displayed on a blue  
back ground.  
NO SIGNAL  
1Press the MENU button. The MAIN MENU will appear  
with the PIC (picture) icon flashing. Press the MENU  
button a further 2 times until the FUN (function) icon is  
flashing.Press P- to enter the FUNCTION menu.  
P+  
MENU  
V-  
V+  
P-  
2 Press the P+/- buttons to select  
BACKGROUND. Then press  
V+/- to turn the BACKGROUND  
BACKGROUND  
function ON or OFF.  
BLACK STRETCH  
NOISE REDUCE  
FADE  
AVL  
Calendar function  
CALENDAR  
1 Press the CALENDAR  
button. The calendar menu  
will be displayed on the  
screen.  
The date on the top line is in  
Year / Month /Day format.  
P+  
MENU  
2 Press the P+/- buttons to highlight  
the year, month or day number. Press  
the V-/+ buttons to set or change  
each number.  
V-  
V+  
P-  
Press EXIT or wait aminute for thecalendar to disappear.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Set up function  
Continued  
AVL  
AVL function  
Automatic Volume Level control reduces the effect of  
large volume changes. For instance, when  
advertisements come on.  
1Press the MENU button.  
The MAIN MENU will  
appear with the PIC  
P+  
BACKGROUND  
BLACK STRETCH  
(picture) icon flashing.  
MENU  
V-  
V+  
NOISE REDUCE  
FADE  
AVL  
Press the MENU button  
a further 2 times until the  
FUN (function) icon is  
P-  
flashing.Press P- to enter  
the FUNCTION menu.  
P+  
2 Press the P+/- button to select  
"AVL" .  
MENU  
V-  
V+  
P-  
BACKGROUND  
BLACK STRETCH  
NOISE REDUCE  
FADE  
AVL  
P+  
3 Press V-/+ button to turn the  
AVL function "ON" or "OFF"  
.
MENU  
V-  
V+  
P-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Organise functions  
ORGANISE  
ORGANISE  
This feature enables TV programmes that may be on a wrong program  
number to be moved to another number.  
This feature is very useful when Automatic Search Tuning has been used  
because programmes are stored in the order they are found, which is usually  
not the desired order.  
When organising, it is best to start from the lowest programme number first.  
P+  
1. Press the MENU button. The  
MAIN MENU will appear with the  
PIC icon flashing.  
MENU  
V-  
V+  
Press the MENU button a further 3  
times until the TUN icon is flashing.  
Press P- to enter the TUNING  
menu.  
PROG NO  
ORGANISE  
SEARCH  
FINE TUNE  
AUTO SEARCH  
P-  
2. Press P+ or P- buttons to  
select ORGANISE.  
Press V+ to enter the menu.  
P+  
(For Example) If the Automatic Search function has placed BBC1  
on programme position 6 and you would like to move this so it  
appears on programme position 1.  
MENU  
V-  
V+  
3. Use P+ or P- to select “FROM”.  
4. Press V+ or V- to change  
P-  
ORGANISE  
the “FORM” programme number  
to 6.  
FROM  
TO  
6
1
5. Use P+ or P- to select “TO”.  
6. Press V+ or V- to change  
the “TO” programme number to 1.  
7.Use P+ or P- to select “MOVE  
CHANNEL”.  
P+  
MOVE CHANNEL  
MENU  
V-  
V+  
8. Use V+ or V- to perform the  
action.  
P-  
The diagrams below explain how the ORGANISE function  
affects other channels when position 6 is moved to position 1.  
Other programmes move  
down to allow for space  
Start Position  
Move FROM 6, TO 1  
P 01 Contents  
P 02 Contents  
P 03 Contents  
P 04 Contents  
P 05 Contents  
P 06 Contents  
P 01 Contents Contents  
P 02 Contents  
P 03 Contents  
P 04 Contents  
P 05 Contents  
P 06  
P 01 Contents  
P 02 Contents  
P 03 Contents  
P 04 Contents  
P 05 Contents  
P 06 Contents  
What was on programme position 6 is now on proramme position 1.  
All the other stored channels have now moved down 1 position so that now.  
What was on programme position 1 is now on proramme position 2.  
What was on programme position 2 is now on proramme position 3.  
What was on programme position 3 is now on proramme position 4.  
What was on programme position 4 is now on proramme position 5.  
What was on programme position 5 is now on proramme position 6.  
Note:It needs some time to move two channels,please wait till the TV  
finishes the process.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the Lock  
This TV set provides theoption of lockingvarious parts ofthe TV to guard  
against unauthorised viewing.  
Changing your password  
Changing your password  
This TV set can set a four digit password, the original  
one is 0000, if you want to reset it, please follow the  
instructions below.  
H.LOCK  
1 Press H.LOCK button, the  
screen will showas the form  
on the right.  
INPUT PASSWORD ----  
P+  
2 Press the0 button fourtimes,  
and enter the menu of LOCK  
setting. Press P+/- button  
and move theindicator to  
CHANGE PW. , and press  
V+ button to enter the  
sub-menu of change  
LOCK SET  
CHANGE PW.  
TUNING LOCK  
PRESET PROG  
AV LOCK  
CHILD LOCK  
MAX VOLUME  
UNLOCK  
OFF  
1
MENU  
V-  
V+  
OFF  
OFF  
50  
P-  
password.  
1
5
9
2
6
0
3
4
8
3 Press the PROGRAM  
NUMBER 0-9 button and  
input a four-digits  
CHANGE PW.  
NEW PASSWORD----  
CONFIRM ----  
7
password.  
4 After inputting your new password, please confirm it by  
keying it in again.You can now enter the lock settings using  
your new password.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the Lock(continued)  
Setting the Lock  
Setting the Lock  
There are TUNING LOCK,AV LOCK, and CHILD LOCK,  
etc,you can set it due to your need.  
H.LOCK  
INPUT PASSWORD ----  
1 Press the H.LOCK button,  
the screen will show as the  
form on the right.  
1
5
9
2
3
7
4
8
2 Press the PROGRAM  
NUMBER 0-9 button 0 for  
four times(or input the  
password you set), and enter  
the LOCK menu.  
LOCK SET  
CHANGE PW.  
TUNING LOCK  
PRESET PROG  
AV LOCK  
CHILD LOCK  
MAX VOLUME  
UNLOCK  
6
0
OFF  
1
OFF  
OFF  
50  
P+  
3 Press P+/-button, move  
the indicator to the lock function you require and press V+  
or V- button to set it ON orOFF, change setting or activate it.  
MENU  
V-  
V+  
P-  
Description of eachlock function  
1.When the TUNING LOCK is set ON, if you want to enter the  
TUNING menu, you will have to type the password.  
2.The PRESETPROG allows the TV toalways be on the same  
channel when you turn it on.  
3.When AV LOCK is set ON the AV channel cannotbe used, hencethe  
screen will indicate thatAV hasbeen locked.  
4.When the CHILD LOCK is set ON, if the buttons on the TV  
are pressed, the screen will indicate that the TV set is in the  
status of CHILD LOCK, and the buttons won't work.  
5.The MAX VOLUME allows you to set a figure for the top limit  
of volume. Volume controlstill shows 1- 100 butvolume level isscaled  
down.  
6.The UNLOCKallows to youto set allthe lock toOFF and set  
the MAX VOLUMEto 100.  
7 If youforget your passwordor a passwordis accidentally set  
enter 9443 asthe password. This will enableyou to regaincontrol.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Playback  
Basic Playback  
Preparations  
Stop playback  
Press the DVD/TV button on the remote control  
1. Press STOP  
button to go to stop mode, the TV  
or the TV to turn on the DVD player.  
screen will show the start logo. For some discs the  
player can recall the location where stopped, such  
as DVDs and audio CDs.  
Basic playback  
2. Press PLAY/ENTER to resume play-back from the  
location where playback was stopped.  
3. Press STOP twice to stop completely.  
Play must thenresume from thetitle beginning.  
1. Press OPEN/CLOSE to open the disc tray,  
place a disc on the disc tray.  
There are two different disc sizes. Place the  
disc in the correct guide on the disc tray. If the  
disc is out of the guide, it may damage the disc  
and cause the DVD player to malfunction.  
Do not place a disc which is unplayable in this  
DVD player (see "Playable discs").  
Previous and Next  
During Playing, pressing the PREV  
keywill  
restart the currentchapter and skip chapters  
backwards with each subsequent press until the  
start of thedisc is reached.  
Each press ofNEXT  
skip the currentchapter and play the next one.  
2. Press OPEN/CLOSE to close the disc tray, the  
playback will automatically start.  
key duringplaying will  
Some discs do not start automatically. Press  
PLAY/ENTER tostart playback.  
In the caseof CD audio and photo discsthe next  
track, song orphoto is selected.  
3. Some discs may start playback with a menu. Use  
the cursor buttons on the remote control to select  
menu options and press PLAY/ENTER to start. You  
may also press the digit buttons to select a menu  
option directly. Many DVDs will not allow this during  
start-up.  
Fast forward and Fast reverse  
1. Press FWD  
to fast forward through the disc.  
button is pressed, the  
Each time the FWD  
fast forward motion speed changes.  
2. Press PLAY/ENTER to resume normal playback.  
Pause playback  
3. Press REV  
to fast reverse through the disc.  
button is pressed, the  
Each time the REV  
1. Press PAUSE/STEP to pause playback (still mode).  
The sound will be muted during still mode.  
fast reverse motion speed changes.  
4. Press PLAY/ENTER to resume normal playback.  
2. Press PLAY/ENTER to resume normal playback.  
Single step playback  
1. When paused, press PAUSE/STEP repeatedly  
to single step forward frame by frame in the video.  
2. Press PLAY/ENTER to resume normal playback.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced Playback  
Advanced Playback  
IMPORTANT NOTE:  
ALL DESCRIBED FUNCTIONS ARE FOR DVD DISCS. There will be some differences for other kinds of disc.  
PROGRAM  
SUBTITLE  
When playing discs, press "PROGRAM" to enter  
program mode. Starting with program number "01"  
highlighted, press the digit buttons to select the title  
and chapter number that you want. When finished  
move the cursor to select "START" . This will start  
the program playback.  
Press " SUBTITLE ", the screen will display "SUBTI-  
TLE 01/XX XXXXX", "01" indicates the ordinal  
number of this language; "XX" indicates total number  
of language; "XXXXXX" indicates the language of  
country. (the number of language depends on disc).  
This function can select up to 32 languages display-  
ed on screen.  
SEARCH  
REPEAT  
Press " SEARCH " once to display Disc Go To --:--,  
use numeric key to enter the desired time of Disc.  
Press " SEARCH " twice to display Track Go To --:--,  
use numeric keys to enter the desired time of track.  
Press " SEARCH " 3 times to display Select Track  
--/03, use numeric keys to enter the desired track.  
Press " REPEAT " and Chapter repeat will be  
displayed on screen, the second press will display  
Title repeat, the third press will display All repeat,  
the fourth press will cancel this function.  
SLOW  
A-B  
Press SLOW to play a disc in slow forward. Each  
time the SLOW button is pressed, the slow  
motion speed changes.  
Press A-B to select the Start point. Press  
again to select the End point. A third press  
will cancel the function.  
Press PLAY/ENTER to resume normal playback;  
Note: This function is invalid for CD.  
ANGLE  
TITLE/PBC  
When enjoying sports, concert or theatre, press this  
key to watch same actions in different angles. (Valid  
for discs possessing this function) Using a disc  
recorded in multi-angle you can view the scene from  
different angles, for example, front, side, whole view  
and exterior scene.  
With some DVD discs pressing this key will display  
the title menu. You can then use the digit buttons  
to select the item you prefer.  
AUDIO  
D.MENU  
Press this key can change the audio mode.  
such as: Audio 1/2: AC 3 2 CH English  
Audio 2/2: AC 3 5.1 CH English  
Press this key to display root menu,select item  
according to your preference. (This function will work  
with a DVD having a multi-layer menu.)  
For CD audio, press this button to cycle between  
Mono Left, Mono Right, Mix-Mono and Stereo.  
Note: When press this button continuously, you must  
above 3 seconds interval.  
D.CALL  
Pressing this key will cycle through "title elapsed",  
"title remain", "chapter elapsed", "chapter remain"  
and "display off ". Each displays the appropriate  
time information.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Special Function Playback  
JPEG DISC PLAYBACK  
Users can recordpictures from digitalcamera or scanneronto a CD-Ror CD-RW disc using a  
personal computer, CD recording driveand suitable software. Be sure touse good quality  
recordable discs andtrustworthy software withgood instructions. Takecare with recording  
settings: the discmust be recordedas data discISO9660 format, shortfile names (8  
characters) are best, no multi-session andmust be "finalised".  
JPEG disc containspictures in acompact file formatwhich can bedecoded by theDVD  
player and output for viewing andenjoyment on thetelevision screen.  
When a disccontaining standard JPEGpicture files isinserted into theplayer, anavigation  
menu will bedisplayed automatically. Use theUP and DOWN cursor buttonsto select afile  
then press PLAY/ENTER. The slide show willcommence. Press PREVIOUSor NEXT to move  
between pictures. Presspause to stopon the currentpicture. Press PLAY/ENTER to resume  
normal playing.  
Press MENU togo back tofolder and fileview.  
Press STOP to display thumbnailpicture menu thenselect "Menu" on-screenwith the cursor  
buttons, press PLAY/ENTER to stepthrough help menufor JPEG viewingcontrols.  
"Transition Effect"changes how onepicture changes tothe next inthe "slide show".  
Program button changesbetween folder andfile list.  
Some repeat functionscan be used.  
Zoom functions arenot included.  
SCREEN SAVER FUNCTION  
This unit employs a screen saver mode to help protect the tube during static video  
pictures. This can be turned off on the GENERAL SETUPPAGE (see Pg. 26)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD System Setup  
DVD System Setup  
General Setup Process  
1.Press the SETUP button, the  
General Setup Page,Preference  
Page and Password Setup Page  
will be displayed in turn.  
SETUP  
..General Setup Page..  
.
3:Ps  
.
3:Lb  
TV Display  
Angle Mark  
OSD Lang  
Spdif Output  
Caption  
LB  
4
On  
4
ENG  
16  
9
2.Press to select,the  
or  
item,then press to enter the  
submenu.  
On  
..Preference Page..  
or  
3.Press to setup,then  
press PLAY/ENTER to confirm.  
PAL  
AUTO  
NTSC  
PLAY/ENTER  
TV Type Auto  
Parental  
Password  
Default  
4.Press SETUP button to exit  
the menu.  
General Setup Page  
ASPECT RATIO DESCRIPTION  
When using the DVD with the internal TV,  
select 4 3/LB.  
..General Setup Page..  
The following information applies only  
when the DVD output is connected to an  
external TV.  
.
3:Ps  
.
3:Lb  
TV Display  
Angle Mark  
OSD Lang  
Spdif Output  
Caption  
LB  
4
On  
4
ENG  
16  
9
SETUP  
On  
4
3/PS (PS = Pan and Scan)  
Screen Saver Off  
You may select if you have a normal aspect  
ratio (4:3) TV, although the NORMAL/LB  
(letter box) is a more common choice. In PS  
mode, widescreen material will fill the screen, but at the expense of chopping  
off extreme left and right edges of the original film picture. For this feature to  
work, the disc must be specially coded. Such discs are uncommon.  
4
3/LB (LB = Letter Box)  
You may select this if you have a normal aspect ratio (4:3) TV. Widescreen  
material will be shown in pure unaltered form, allowing the entire picture area  
of the original film to be viewed without any side cropping. Black bars will  
appear above and below the picture.  
PLAY/ENTER  
16  
9
You may select this if you have a widescreen (16:9) TV. Back bars may still  
appear above and below the picture even if using a widescreen TV. This is  
because some film directors prefer to use ultra widescreen aspect ratios e.g.  
2.35:1. This will normally be indicated on the DVD packaging.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD System Setup(Continued)  
DVD System Setup  
General Setup Page  
..General Setup Page..  
ANGLE MARK: Users can select a particular  
.
camera angle when playing a DVD which offers  
multiple angles.  
This item allows you to set Angle Mark ON or OFF.  
TV Display  
Angle Mark  
OSD Lang  
Spdif Output  
LB  
On  
On  
Off  
ENG  
..General Setup Page..  
TV Display  
Angle Mark  
OSD Lang  
Spdif Output  
Caption  
LB  
On  
On Screen Display (OSD) Language: Users  
can select on-screen display language.  
ENG  
English  
French  
On  
Screen Saver Off  
SPDlF OUTPUT MODE: Sets the audio outputs.  
This DVD player includes three kinds of audio output:  
1. SPDlF OFF: An analog surround sound format is output through the  
back-paneI connections for 2-CH audio out or 5.1 CH audio out.  
2. SPDlF/RAW or SPDIF/PCM: This  
..General Setup Page..  
TV Display  
Angle Mark  
LB  
On  
OSD Lang  
Spdif Output  
Caption  
ENG  
Spdif Off  
surround sound format is output to a Dolby Digital/DTS decoder  
through the coaxial connector on the back panel of the product.  
On  
Spdif / Raw  
Spdif / Pcm  
Screen Saver Off  
CAPTIONS: This function allows you to display or hide the caption.  
..General Setup Page..  
TV Display  
Angle Mark  
LB  
On  
OSD Lang  
Spdif Output  
Caption  
ENG  
On  
On  
Off  
Screen Saver Off  
SCREEN SAVER: If the screen saver is on,then there  
will be an animated picture of DVD on the screen  
whenever the DVD player is idle for more than 3  
minutes .  
..General Setup Page..  
TV Display  
Angle Mark  
LB  
On  
OSD Lang  
Spdif Output  
Caption  
ENG  
On  
Screen Saver Off  
On  
Off  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD System Setup(Continued)  
DVD System Setup  
Preference Page  
The Preference Page is only available when there is no disc  
in the player. These settings are applied consistently to all  
discswhichareinsertedandplayed.  
..Preference Page..  
TV TYPE: This player  
supports different TV output,  
including MULTI(Auto),  
NTSC, and PAL systems.  
Usually please set to MULTI.  
PAL  
AUTO  
NTSC  
TV Type Auto  
Parental  
Password  
Default  
SETUP  
PARENTAL: The parental  
control function works in  
conjunction with the  
different censorship classes  
assigned to DVDs. These  
classes help to control the  
types of DVDs that the family  
watches, There are up to 8  
censorship classes for DVDs.  
..Preference Page..  
TV Type Auto  
Parental  
1 Kid Saf  
2 G  
3 Pg  
PLAY/ENTER  
Password  
Default  
4 Pg 13  
5 Pgr  
6 R  
7 Nc17  
8 Adult  
Note:  
1 To change this setting you must enter your password.  
(Initial password is 1234)  
2 When set to OFF, all discs may be viewed.  
PASSWORD CHANGE:  
You can change your password  
..Preference Page..  
by entering 4 digits. Your must  
confirm the 4 digits before the  
new password can be accepted.  
TV Type Auto  
Parental  
Password  
Default  
Change  
Old Password  
New Password  
Confirm PWD  
NOTE:If you forgetyour password  
or a password is accidentally set  
enter 1369 as the password. This  
will enable you to regain control.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD System Setup(Continued)  
DVD System Setup  
SETUP  
DEFAULT: Resets all settings  
..Preference Page..  
(except password and parental  
lock status) for this DVD player  
back to the manufacturers  
original settings. Press ENTER  
to perform the reset.  
TV Type Auto  
Parental  
Password  
Default  
Reset  
PLAY/ENTER  
Note:  
Some functions may not be available depending on the type of disc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playable Discs  
The following discs can be played:  
You cannot play discs other than those listed above.  
You cannot play non-standard discs, even if they may be labelled as above.  
The performance of CD-R or CD-RW discs depends on the way the disc is prepared  
- see under "Special function playback - JPEG disc playback".  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Disc Protection and DVD Characteristics  
Compare DVD disc with other discs:  
DVD  
LD  
SVCD  
VCD  
CD  
Digital/  
MPEG I  
Encode  
method  
Digital/MPEG  
Digital  
Digital  
Analog  
Single- Double Single- Double-  
side  
-side  
side  
side  
650MB  
650MB  
650MB  
Capacity  
single- single double- double-  
layer  
4.7G  
-layer layer  
layer  
17G  
8.5G  
9.4G  
Single-side  
60 minutes  
double-side  
120 minutes  
133  
minutes minutes minutes minutes  
242  
266  
484  
45 minutes 74 minutes 74 minutes  
Playing Time  
Disc diameter  
12cm/8cm  
30cm/20cm  
12cm  
12cm  
12cm/8cm  
No more than  
430 line  
Horizontal  
resolution  
No more than No more than  
More than 500 line  
350 line  
250 line  
Picture  
proportion  
One kind  
One kind  
Multiple kinds  
32 kinds  
One kind  
16 kinds  
at most  
Subtitle  
4 kinds  
4 kinds  
at most  
4 kinds  
at most  
Language  
2 kinds  
2 kinds  
8 kinds  
48KHz, 96KHz/  
6, 20, 24bit  
44.1KHz/  
16bit  
44.1KHz/  
16bit  
44.1KHz/  
16bit  
44.1KHz/  
16bit  
Sound quality  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting the TV set to the other video and audio equipment  
Connection of AV input /output terminal  
The figure belowshows how toconnect external equipmentusing AV signals.  
an additional TV  
DVD, VCD or otherunits  
Video output  
Laser DVD with outputterminal  
DVD, VCD or otherunits  
There is alsoan AV input onthe side ofyour television. Usethe LeftAudio input (whiteterminal on  
the TV), ifyou are connectingequipment with monosound. The MONOsound will bedelivered by  
both left andright speakers.  
DVD player  
VCR  
Video output  
Audio left output  
Audio right output  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting guide  
To assist in location possible faults use help guide below.  
BREAKDOWN PHENOMENON  
CHECKING  
PICTURE  
SOUND  
The aerial direction and connection  
Picture with snow  
Noise  
This is called ghosting which can be minimized with  
an outside aerial, and good quality cable and  
terminations. Altering the aerial direction can also  
minimize this effect.  
Double or Triple Image  
Normal  
Electrical interference which can be caused by cars,  
motorbikes etc, Fluorescent lamps and dirty  
insulators on overhead power cables.  
Noise  
Disturb  
Volume Sound mute  
Normal  
No Picture  
No colour  
No sound  
Ensure that the power supply is connected to  
the TV setand turned on. Also ensure that the  
TV set is not in "Listen Mode" or that the  
brightness and contrast are not turned down.  
No sound  
Adjust colour control  
Adjust channel again  
Normal volume  
Normal or Weak Volume  
Scramble  
Colour Purity faultwhich can becaused by movingthe  
TV set, placingmagnets near theTV screen orturning  
on/off house holdappliances such asvacuum cleaners  
near the TVset. Turnthe TV off with themains power  
switch for 15minutes. When thepower is turnon again  
the TV setwill automatically demagnetisethe screen.  
In severe casesyou may needto repeat thisprocess.  
Colour Spot  
Normal volume  
Note:  
1.If the fault can not be repaired using the above guide consult with your local authorized service  
center.  
2.The TV set must only be repaired by a qualified registered service person. Never attempt to  
remove the back cover as TV set has dangerous voltages inside that may cause a fatality or fire.  
3. The cabinet may produce the occasional "snapping sound" This is normal and caused by the  
materials in the cabinet expanding with room temperature changes.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Specifications  
M o d e l  
5115DVD  
Colour system  
PAL, NTSC PLAYBACK  
BG  
Sound system  
Picture tube  
51cm colour picture tube  
2X2W 10% THD  
Sound output power  
Power requirements  
Power consumption  
Dimension mm  
AC 240V~ 50Hz  
80W  
500 Width x480 Depth x485 Height  
mm  
Remote control  
Owner's manual  
Battery(AA)  
x1  
x1  
x2  
Accessories  
NOTE  
Design and specifications are subject to change without notice.  
The dimension in this manual is a approximation.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Graco Thermostat 308791E User Manual
Grizzly Network Router G1026 User Manual
H2O Audio Carrying Case iN5 70 User Manual
Harbor Freight Tools Fryer 44707 User Manual
Harbor Freight Tools Thermometer Pocket Thermometer User Manual
Heath Zenith Home Security System SL 6105 User Manual
HP Hewlett Packard Noise Reduction Machine 11 User Manual
Husqvarna Chainsaw 128 C User Manual
Husqvarna Welder K3000 User Manual
Ikelite Digital Camera PowerShot A700 User Manual