HD Ready Digital LCD TV and
HD Ready Digital LCD TV/DVD Combi
USER'S MANUAL
Please read this manual carefully before
using your television and keep this manual
for future reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Notice
To prevent fire or electric shocks please read the instruction before
installing, using and cleaning the television.
l Please read all the instructions before operation;
l Please keep the manual for future reference ;
l Do not use any accessories that are not recommended by the manufacturer:
l Before operation, make sure the operating voltage of this unit is corresponds
with your houseelectrical supply;
l Do not placethe unit onunstable or industy and humidplaces;
l Never put theunit in directsunlight or nearheat sources;
l Allow enough space for proper ventilation;
l Please keep water away from the LCD-TV . If water comes in to contact with
the LCD-TV, disconnect the power cord from the power source, then wipe the
set with a dry soft cloth;
l Do not removethe back cover. If servicing is required, please referto
customer helpline.
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Panel Control
SOURCE MENU VOL- VOL+ CH-
CH+ STANDBY
5 1
2
3
4
Or
SOURCE MENU VOL- VOL+ CH-
CH+ POWER
11W
12W
6
7
6
7
2
3
4
5
1
SOURCE MENU VOL- VOL+
CH-
CH+ STANDBY
POWER
T1
R1
(The figure above and the description of the button may be different,
all picture in this manual is just for reference, please see the actual set.)
Control Panel Function
1. Standby switch
2. SOURCE Call the Input Source menu/Confirm button when operation
menu.
3. MENU Press to select the main menu
4. VOL- Volume down / Left orientation to adjust the item in the OSD
VOL+ Volume up / Right orientation to adjust the item/Press toenter
5. CH- TV channel down / to select the item in the menu
CH+ TV channel up / to select the item in the menu
6. Power indicator
7.Remote Sensor
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection
DVD
STOP
PLAY/PAUSE OPEN/CLOSE
PREV
NEXT
DVD insert
S-Video Input
SCART
Just take oneTV with DVDfor example, pleasesee the real)
(Please refer to actualproduct
of the DVD slotand buttons)
HDMI
Connect to HDMI
output of other
equipment
Component/S-Video
Audio Input
PC Audio Input
connect to the
digital amplifier
for digital audio
output
Connect the PC output
connector from a PC to
the audio input port
L
R
COAXIAL
AUDIO
Y
Pb
Pr
Common Interface
PC AUDIO IN
ANT IN
HDMI
VGA IN
Earphone port
Component Input
Connect a component
video/audio
Antenna Input
Connect cable or
antenna signals to
the TV, either direc-
tly or through your
cable box.
VGA Input
Connect to the VGA
15PIN analog output
connector of the PC
display card for PC
display purpose
device to these jacks
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control (for TV/DVD Combi)
When using the remote control, aim it
towards the remotesensor on theTV
Buttons on the remote control
Stand By
DVD Open/close
Picture Mode
Scan
STANDBY P.MODE
S.MODEOPEN/CLOSE
Sound Mode
Mute
SCAN
SLEEP
INFO
MUTE
Sleep button
Call Screen Display
Program Number
Channel selection
Source Exchange
Call menu
1
5
2
6
0
3
4
7
MENU
8
SOURCE
UP
9
CH+
LEFT
RIGHT
V+
Volume selection
Cursor Move button
DOWN
DVD play/Confirm button in menu
Channel selection
Volume selection
Zoom
PLAY
OK
CH-
V-
Exit Screen Display
Swap
ZOOM
CH.LIST
SWAP
EXIT
Channel list button
PROGRAM ANGLE
AUDIO SUBTITLE
NICAM
EPG
REV
FAV
DVD PROGRAM/ DVB-T EPG button
DVD ANGLE/ DVB-T favourite
DVD FAST REVERSE/FORWARD
DVD /DVB-T SUBTITLE
DVD/DTV Audio /NICAM
DVD PREVIOUS
DVD SETUP
F WD
NEXT
PREV
D.MENU
SETUP PAUSE/STEP STOP
A-B
i
REPEAT
SEARCH
D.CALL
SLOW
10+
TITLE/PBC INDEX
DVD NEXT
DVD SLOW
SUBCODE
REVEAL
TEXT
TIME
HOLD
MODE
MIX
DVD STOP
DVD SEARCH
SIZE
DVD REPEAT
DVD CALL
DVD A-B REPEAT
DVD 10+
DVD TITLE/PBC
Teletext buttons
Teletext index
RED button
Fast text buttonin analog
Green button
signal
Blue button
Function button inDVBT
(just reference theOSD)
Yellow button
(For TV withDVD Models)
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control (for TV/DTV only)
When using the remote control, aim it
Buttons on the remote control
towards the remotesensor on theTV
Stand By
NICAM
STANDBY P.MODE
S.MODE
INFO
NICAM
MUTE
Picture Mode
Scan
SCAN
SLEEP
Sound Mode
Mute
Sleep button
Call Screen Display
Program Number
Channel selection
Source Exchange
Call menu
1
5
2
6
0
3
4
7
MENU
8
SOURCE
9
CH+
V+
UP
Volume selection
Cursor Move button
LEFT
RIGHT
Confirm button in menu
Channel selection
Volume selection
Zoom
OK
DOWN
CH-
V-
ZOOM
EPG
CH.LIST
SWAP
FAV
EXIT
Exit Screen Display
Swap
INDEX SUBTITLE
Channel list button
DVB-T EPG button
DVB-T favourite
DVB-T SUBTITLE
Teletext index
SUBCODE
REVEAL
TEXT
TIME
HOLD
MODE
MIX
SIZE
Teletext buttons
RED button
Fast text buttonin analog
signal
Function button inDVBT
(just reference theOSD)
Green button
Blue button
Yellow button
Note: the instructionon this manualis
taking TV/DVD combiremote control as
an example.
(For TV withoutDVD Models)
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing Batteries
Installing Batteries
1.Open the cover of the battery compartment at the back of the remote
control.
2.Insert two AA alkaline batteries in the compartment. (plus and minus poles to
respective mark)
3.Replace the cover of the battery compartment.
1
2
3
Precautions
As strong light may interfere the
signals, change yourposition to
operate the remote controller if
the television cannot be turned
on or off as youexpect.
Make sure that there is no
obstacle between theremote
controller and televisionset.
Make sure that two AA 1.5V alkaline
batteries are loaded. The batteries
must be of the same type. The batteries
must be located properly. The batteries
are not rechargeable. If your TV is to be
stored for a period of time, remove the
batteries from the remote control.
Keep the remote controller
away from heat source or
humid area toensure
effective performance of
the remote controller.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection Instructions
Grounding
Ensure that you connect the grounding / earth wire to prevent possible
electric shock. If grounding methods are not possible, have a qualified
electrician install a separate circuit breaker. Do not try to ground the
unit by connectingit to telephone wires, lighteningrods, or gaspipes.
External Equipment Connections
Antenna Connection
- Antenna or Cable Service with a Cable Box Connections
- For optimum picture quality, adjust antenna direction if needed.
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
wall antenna
socket
ANT IN
RF coaxial wire (75 ohm)
VHF antenna
UHF antenna
Be careful not to bend the bronze
wire when connecting the antenna.
outdoor
antenna
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
To improve picture quality in a poor
signal area, purchase and install a
signal amplifier.
ANT IN
If the antenna needs to be split for two
TV s, install a 2-Way Signal Splitter
in the connections.
If the antenna is not installed properly,
contact your dealer for assistance.
NOTE: All cables shown arejust for example.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection Instructions
VGA Input
You can use your LCD-TV as a monitor for your personal computer using a VGA
cable (not supplied).
Connection and use steps:
1.Read the userguide supplied with
your computer and ensure that it has
a VGAconnector;
2.Make sure that the power of the LCD
-TV and thePC are off;
3.Connect a Dtype 15-pin VGAinterface
VGA IN
cable ( not supplied ) to the VGAvideo
interface connector on the PC. Then
connect the other end to the PC video
interface connector on the back of the
LCD-TV.Tighten the screwson the VGA
connectors once they are firmly
connected, connect the audio cable(not
supplied)to the audio input on the back of
your LCD-TV;
4.Turn on the power ofthe LCD-TV first ,
and then turn on the power of the PC;
5.Set the video input mode of the LCD-TV to PC;
6.Check the imageon your TV. There may be noise associatedwith the resolution,
vertical pattern, contrast or brightness in PCmode. If noise is present, change
the PC modeto another resolution, change the refreshrate to anotherrate or
adjust the brightnessand contrast onthe menu untilthe picture isclear. Ifthe
refresh rate of the PC graphic card cannot be changed,change the PC graphic
card or consult the manufacturer of the PC graphic card.
Mode
VGA
Resolution
640*480
Line frequency (Khz) Frame frequency (Hz)
31.5KHz
37.9KHz
48.4KHz
60Hz
60Hz
60Hz
SVGA
XGA
800*600
1024*768
Note: Allabove listed aresubject to VESACriteria.
YPbPr Input
How to connect
Connect the DVD video outputs (Y, PB, PR)
to the Component(Y, Pb, Pr) in socket on
the TV and connect theDVD audio outputs
to the AUDIO jacks on the TV, as shown
in the figure.
NOTE: If your DVD player doesnot have
component video output, use S-Video.
How to use
1. Turn on the DVD player, insert a DVD.
2. Set themode of theLCD-TV to Component.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection Instructions
(If connected to S-Video,select the S-Video external input source.)
3. Refer the DVD player's manual for operating instructions.
Component Input ports
To get better picture quality, connect a DVD player to the component
input ports as shown below.
S-VIDEO Input
- To avoid picture noise (interference), leave an adequate distance between the
VCR and TV
Connection and use steps:
1.Read the user guide supplied with your AV devices and ensure that it has
S-Video connectors;
2.Make sure that the power of the LCD-TV and the AV device are switched off;
Connection Option 1
Set VCR output switch to 3 or 4 and then
tune TV to the same channel number.
Connection Option 2
1. Connect the audio and S-Video cables
from the VCR's output jacks to the TV
input jacks, as shown in the figure.
2. Insert a video tape into the VCR and
press PLAY on the VCR. (Refer to the
VCR owner s manual.)
3.Turn on the power of the LCD-TV first ;
2
and then turn on the power of the AV
device;
4.Set the video input mode of the LCD-TV
1
.
to S-Video mode .
VCR
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection Instructions
SCART Input
1.Connect the scart lead from the external device(DVD
players, settop boxes or game consoles, to the TV SCART
socket.
2.Set the mode of the LCD-TV to SCART.
3. Press Play button on external equipment and it should
appear on the screen.
SCART
External equipment
CI Card Input
The common interface (CI) slot is designed to accept the Conditional
Access (CA) Module and Smart card in order to
view the pay TV programmes and additional
services. Contact your Common Interface
service provider to get more information about
the modules and subscription. Please noted that
CA modules and smart cards are neither
supplied nor optional accessories from us.
Warning: switch off your TV before any module
is inserted in the Common Interface slot.
Insert the CAM correctly, then Smart Card to the
CI slot that is located at the side of the TV.
HDMI Input
HDMI
TV
HDMI Devices
Connect the cablefrom the HDMIdevices
to the TV HDMI, asshown in thefigure.
How to use
1. Set the mode of the LCD-TV to HDMI.
2. Operate the corresponding external equipment.
Refer to external equipment operating guide.
HDMI
HDMI Devices
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operating Instructions
Turn on the LCD-TV
When the POWER(STANDBY) button on the remote control is pressed and the
LCD-TV is turned on, the indicator light on the front of the LCD-TV changes from
red to green. When the LCD-TV is turned off using the POWER(STANDBY)
button, the LCD-TVwill go into standby mode and the indicator light turns red.
You can also turnon the TV from standby mode bypressing the digits(1-9)or
CH+/CH- .
The display will appear on the screen
when the TV is turned on forthe first
time:
Installation Guide
Language English
Auto Search
Press
want, then press
Auto Search and OK to enter the submenu:
press to select the country you are in,
then press
item and
/
to select the language you
/
to select the
/
EXIT
MENU
OK
/
to move to the following
to select Start , then press
/
Please select country first,
Then select Start to update info.
OK to confirm.
All channels will be stored after the
searching.
Country selection
Start
UK
Cancel
Inputs selection
Source
Press SOURCE button to display the Source menu.
/
DTV
TV
SCART
Component
PC
Press button to select the inputs you need and
the TV will turn to the source automatically
in 3 seconds or press OK to confirm.
HDMI
S-Video
DVD
V+/V-
OK
EXIT
Press the V+/V- button to increase/decrease the volume and there will be display
on the bottom of the screen.
Mute
1.Press the MUTE button to mute the sound temporarily. A mute icon appears on
the screen.
2.Press the MUTE button again or V+ to restore the sound.
The mute icondisappears.
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operating Instructions
Sound Mode
Press S.MODE button on the remote control for menu display . For desired
mode as follows:
Standard Music Theatre Voice Personal
Select the TV Channel
You can use the number keys on the remote control to directly select TV
channels.
The LCD-TV can store up to 100 channels , and you can press the CH+/CH- keys
on the remote control or on the TV set to make a selection.
Picture Mode
Press P.MODE button on the remote control for menu display . For desired mode as
follows:
Standard Mild Personal Fresh
Program Swap
1 Suppose the TV set is in channel 8 just now and in channel 18 now .
2 If you want to return to the last watched program in channel 8, you can simply press
the SWAP button.
3 If you want to return to channel 18, press the button again. Through this function, you
can easily change between the channel you are watching and the channel you watched
just now.
Sleep
Press SLEEP button to set the sleep timer among Off/10min/20min/30min/60min/90min
/120min/180min/240min.
If 1 minute left, the 59Sec. TO POWER OFF will appear on the screen. The TV turns
off automatically when the 1Sec. TO POWER OFF is on.
Scan
Press SCAN button to skim the channels . You can press SCAN again stop scanning.
Zoom
Press to zoom the picture .
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Operations
1. Press MENU button to display the main menu, and
main menu .
/
to select the
/
2. Press
to scroll through the options
3. Press / buttons to make changes to the parameters
4. Press MENU to exit the menu step by step
5. Press the EXIT button to exit the menu
PICTURE MENU
SOUND MENU
SOUND
PICTURE
Video Mode
Contrast
Brightness
Colour
Sharpness
Tint
Personal
50
Audio Language
English
Personal
Audio Mode
Treble
Bass
Balance
AVL
50
50
50
0
50
50
0
Off
EXIT
MENU
OK
EXIT
MENU
OK
FUNCTION MENU
FUNCTION
LOCK MENU
LOCK
Language
English
Change Password
Subtitle Language
Display Mode
Blue Screen
Reset
English
Auto
Off
Menu Lock
Program Set
Program No .
Source Lock
Child Lock
Off
Off
1
Off
EXIT
MENU
OK
EXIT
MENU
OK
TUNING MENU
TUNING
TIME MENU
TIME
Clock
-- -- -- --
Off
Off
Off
Lisbon GMT
Auto Search
Off Time
On Time
Sleep
DTV Manual Search
ATV ManualSearch
Guide
Time Zone
CI Information
EXIT
MENU
OK
EXIT
MENU
OK
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Operations
NOTE: Using your remote control to navigate in the on-screen menus.
The on-screen menus shown in this manual may be different from those on your TV. These
are example to illustrate your TVs operation.
Picture Menu Options
Picture quality can be adjusted for any input separately .
The picture qualityon the screencan be adjustedas follows:
1. Press MENU button and
/
until the picture menu appears on the screen.
/
2. Press
the desired option .
button to enter the picturemenu and goup and downto select
3.Press
/
button to increase and decrease the level to match your preference .
4. Repeat step 2 and step 3 until desired picture quality has been achieved .
Functions:
Video Mode: Press
/
to set the picture mode .
Contrast : Used to set the contrast balance of the picture.
Brightness : Used to set the brightness level of the picture.
Colour : Press
/
to adjust the colour saturation of the picture..
Sharpness : By increasing the level, it will show cleaner and clearer images
and by decreasing the level, it will make picture smoother.
Tint(Only available in NTSC): Set the colour tone of the picture.
Colour Temperature : Press to select thecolour temperature from Normal/Cool/
Warm .
Noise Reduction: Adjust the quality of the pictureby selecting Off,Low,
Middle,High.
PC Adjust (can be adjust only in PC mode and there is PC signal): Press OK button
/
to enter the submenu.
Press
to adjust the value.
PICTURE
Auto Sync
H.Position
V.Position
Size
50
50
0
50
Phase
EXIT
MENU
OK
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Operations
Auto Sync: Adjust the picture location frequency and phase parameters
automatically in PC.
H.Position: Picture horizontal adjust.
V.Position: Picture vertical position adjust.
Size: Adjust the size of the LCD to match the PC input source.
Phase: Removes any horizontal distortion and clears or sharpness the
displayed characters.
Sound Menu Options
Sound can be adjusted as follows:
1. Press MENU and
/
button until the following menu appears on the screen
SOUND
Audio Language
Audio Mode
Treble
Bass
Balance
AVL
English
Personal
50
50
0
Off
EXIT
MENU
OK
/
2. Press
button to enter the sound menu and up and down to
/
select the desired option .
3.Press
/
button to increase and decrease the level to match your preference .
4. Repeat step 2 and step 3 until desired sound quality has been achieved .
Functions :
Audio Language(only available in DTV mode) : Press OK to enter the submenu.
/
Then press
to select the language you need.
to select the Primary and the Secondary item and press
Audio Mode : Press
Standard.
/
to select among Music/Theatre/Voice/Personal/
Treble : Increases or decreases the level of the treble sounds.
Bass : Increases or decreases the level of the bass sounds.
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Operations
Note: Bass andTreble canbe adjust inany audio mode, and if thenumerical
value is changed, the audio modewill be changedto personal automatically.
Balance : Adjust the audio output between left and right speakers.
AVL: Automatic Volume Limit Control . Reduces the differences in volume level
between different broadcasters.
Function Menu Options
1. Press MENU button and
/
until the following menu appears on the screen.
FUNCTION
Language
English
English
Auto
Subtitle Language
Display Mode
Blue Screen
Reset
Off
EXIT
MENU
OK
/
2. Press
button to enter the function menu and go up and down to
select the desired option .
3.Press
/
button to increase and decrease the level to match your preference .
4. Repeat step 2 and step 3 until desired function quality has been achieved .
Functions:
1. Language: Used to set the language of the on-screen display.
2. Subtitle Language (in DTV mode only): To switch the subtitle languages .
3.Display Mode: Used to set the aspect ratio of the display. Choices include Auto
/Full Screen/Zoom1/Zoom2/4:3/16:9( Display mode may differ from different
inputs. )
4. Blue Screen: Used to turn theblue screen option On or Off. With theoption on,
your TV screen turns blue after 3 seconds without an input signal.
5. Reset :Press OK button to enter the dialogue Are you sure? And press
/
to select Yes, then press OK button to resetthe TV setting to factorydefault.
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Operations
Lock Menu Options
1. Press MENU button and
/
until the following menu appears on the screen.
LOCK
Change Password
Menu Lock
Program Set
Program No .
Source Lock
Child Lock
Off
Off
1
Off
EXIT
MENU
OK
2. Press OK button to display the following menu .
Press the number buttons (0~9) to enter the password.(The initial password is
0000. If you forget your password, you can enter 9443 at any time to access the
lock menu), the lock menu opens.
LOCK
Change Password
Menu Lock
Program Set
Program No
Source Lock
Child Lock
Off
Please enter password
Off
EXIT
MENU
OK
/
3.Press
4.Press
button to go up and down to select the desired option .
/
button to increase and decrease the level to match your preference .
5.Repeat step 3 and step 4 until desired quality has been achieved .
Functions:
1. Change Password: The password can be changed. Press OK to enter the menu
as follows. Enter the password , if the same password is entered correctly twice,
the old password will be changed.
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Operations
Lock Menu Options Continued
LOCK
Change Password
Menu Lock
Program Set
Program No .
Source Lock
Child Lock
Off
Please enter password
New
Confirm
Off
EXIT
MENU
OK
Menu Lock: Press
/
to select Off/Tuning/Main Menu.
To set Tuning, the search function will be locked, to set Main Menu, you will need
input the password if you want to operation any menu.And you can resume it by
setting Off or operate Clear Lock.
Program Set: Used to set upstart condition. Press
/
to select among the
inputs signals. The setted mode will be entered if the TV is switched off and on
again. To set Off, the TV will memory the off-mode.
Program No.(it can only be selected when the Program Set is DTV or TV): Press
/
to select the channel number you want to watch when the TV on again.
Source Lock: Opted to hinder external input modes, such as PC. Press OK to
/
display menu as follows. Press
to select the option, and press
/
to set on or off. If you want to cancel some source mode, enter lock menu and
set it off or active clear lock.
LOCK
DTV
TV
SCART
Component
PC
Off
Off
Off
Off
Off
Off
HDMI
EXIT
MENU
OK
Child Lock: Press / button to set on or off mode. If lock on mode is set, child
lock is inactivatedautomatically. In such case, buttons onthe television isuseless
and only buttons on remote control can be used, if child lock button(button on the
television) is pressed, the screen willdisplay Child Lock. The child lock mode
can be resumedby entering Lockset menu, set child lockoff or active Clear Lock.
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Operations
Lock Menu Options Continued
LOCK
Max Volume
Initial Volume
Tuning Program
Clear Lock
100
Off
Parental Lock
Off
EXIT
MENU
OK
Max Volume: Press
/
adjusted, the sound value can not exceed that maximum volume value.
to adjust. If a certain value is set, when volume is being
Initial Volume:Used to memorythe volume youhave set whenyou turn onour TV
after turn off it.
/
Tuning Program: Press OK button to enter the submenu. Press
to select the
program you wantto edit. The colour of the circle is corresponding with the
buttons on the bottom of the remote control.
NAME(only available inATV ): to rename the analog channel by pressing the red button
/
press
to input the characters and press
/
to select the position.
LOCK: to lock the program by pressing the green button and pressagain to
unlock.
FAV: to set the favouriteprogram by pressingyellow button and pressagain to
cancel.
SKIP: to skip the channelwhen press CH+/CH- button by pressing the blue button
and press again to cancel.
Clear Lock: Press
/
and the maximum volume returns to 100.
to unlock allset modes, settingall lock optionsto off,
Parental Lock: Press
/
program blocks accordingto different ages.
to change thesetting. To enable settingspecific
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Operations
Tuning Menu Options
1. Press MENU and
screen
/
button until the following menu appears on the
TUNING
Auto Search
DTV Manual Search
ATV ManualSearch
Guide
CI Information
EXIT
MENU
OK
Note: This menu only appears in TV and DTV mode .
/
2. Press
button to enter the tuning menu and go up and down to
select the desired option .
3.Press
/
selected option to your preference .
button to increase and decrease the level to adjust the
4. Repeat step 2 and step 3 until desired quality has been achieved .
Functions:
1. AutoSearch: Autosearch the TV signal sourcefor available channels, then
/
put them inmemory. Press
The on-screen menuappears :
to select the item. Then press OK to confirm.
TUNING
Auto
DTV
Please select country first,
Then select Start to update info.
ATV
Tuning Progam
Country selection
EPG
UK
CI In
Start
Cancel
EXIT
MENU
OK
/
Press
/
OK to confirm, the following will appears on the screen:
to select the country andpress
to select Start and then press
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Operations
Tuning Menu Options Continued
Channel Tuning
32%...
687.25MHz TV
TV
DTV
Radio
: 12Programme(s)
: 0Programme(s)
: 0Programme(s)
Press<Menu> to skip.
Press<Exit> to exit.
EXIT
MENU
You can press EXIT button to enter the submenu and then select Yes to exit the
tuning absolutely.
The first time you press MENU button the menu will display on the screen, and
you can select Yes ,the ATV tuning will be skipped.
Do you wantto skipATV tuning?
Yes
No
The second time you press MENU button the menu will display on the screen, and
you can select Yes ,the DTV tuning will be skipped.
Do you wantto skip DTVtuning?
Yes
No
DTV Manual Search: Press OK button to display the submenu. After selecting
DTV channel number, press OK again to start to search digital channel and you
can press EXIT to exit the search.
/
ATV Manual Search: Press OK button to display the submenu. Press
the item and to adjust.
to select
/
ATV ManualSearch
Storage To
System
3
DK
3
Current CH
Search
Fine-Tune
Skip
Frequency
Off
424.75MHz
EXIT
SAVE
Select System among DK/L/BG/I and set the Current channel. Then select
Search and press to start it. Select Fine-Tune and adjust it to improve the
/
picture. After these operation you could select Storage To to set the channel
number you want to save. Then press the red button to save the adjustment or
press EXIT to exit it.
Guide( in DTV mode only): PressOK button to enter the submenu.
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Operations
Tuning Menu Options Continued
PROGRAMME GUIDE DTV 23 bid-up.tv
00:00
10 Mar 200415:04
DTV
010 Mar
16:30
17:30
5 five
The street of SanFra...
No Information
Funstamps
16 QVC
Gold Workshop With JanSpanish
No Information
17 UK Gold
23 bid-up.tv
25 TCM
No Information
No Information
No Information
26 UK Style
EXIT
INFO
Schedule
Reminder
DATE
OK
The colour of the circle is corresponding with the buttons on the bottom of the
remote control.
EXIT : Press EXIT button to exit the screen.
/
INFO: Press
program information.
to select the program and then press INFO button to display the
Schedule: Press the green button to display the schedule you have set .
DATE: Press yellow button to enter the submenu, then press
/
set the date. You can press yellow button again to back to the menu.
button to
Reminder: Press blue button to enter the submenu.
Reminder
10 Mar 200414:58
Programme
Hour
Minute
Mode
Date
5 Five
14
35
Once
Wed.
Mar
Month
EXIT Schedule MENU
OK
Program: Press
Hour/Minute/Date/Month: Press
Mode: Press to select Once/Everyday/Weekly .
/
to select the program you want to watch.
/
to set the time.
/
If Everyday selected, the Date and Month will not be available.
After the operation above, pressOK to reminder orpress green button to display
the schedule youhave set.
CI Information: insert a card first and CI Module Inserted will be on the screen.
After selecting CIInformation, press OKto access thecard menu. Referto the
module instruction manualfor setting details.
When module is removed, the CI Module Removed will be on the screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Operations
Time Menu Options
1. Press MENU and
screen
/
button until the following menu appears on the
TIME
Clock
-- -- -- --
Off
Off
Off
Lisbon GMT
Off Time
On Time
Sleep
Time Zone
EXIT
MENU
OK
/
2. Press
button to enterthe time menuand go up and down to
select the desired option .
3.Press / button to increase and decrease the level to adjust the
selected option toyour preference .
4. Repeat step 2 and step 3 until desired quality has been achieved ..
Functions:
1.Clock( can not be adjusted in DTV mode): Press OK button to enter the
submenu.
TIME
Date
29
Clock
Month
Year
Hour
5
Off Time
On Time
Sleep
2008
18
32
Minute
Time Zone
Close
EXIT
MENU
OK
/
Press to select theitem and / to adjust, ifyou have finish the
adjustment, select Close and then press OK to exit.
Off Time: Used to set the time that the TV goes off automatically.
Press OK button to enter the submenu as follows:
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Operations
Time Menu Options Continued
TIME
Repeat Off
Hour
Minute
Clock
00
00
Off Time
On Time
Sleep
Time Zone
Close
EXIT
MENU
OK
/
Press
to select Repeat and
/
hour and minute. (The Hour and Minute can not be available when Repeat is off).
to select the frequence, then set the
If you have finish the adjustment, select Close and then press OK to exit.
On Time: Used to set the time that the TV comes on automatically. And the
operation is the same with the Off Time above.
Sleep: Press
/
to set the optional sleep timer.
to set the optional time zone.
Time Zone: Press
/
Download from Www.Somanuals.com. All Manuals Search And Download.
TELETEXT
Teletext is an information system, broadcast by certain channels, which can be read like
a newspaper . It also provides subtitles for people with hearing difficulties or those who
are unfamiliar with the language in which a particular program is being broadcast (cable
networks, satellite channels, etc.).
Note: The teletext buttons could be working even if there isno teletext signal, but there
is no teletext display.
Teletext
TEXT
Teletext functions
To select teletext press the TEXT button on the
handset. To switch off teletext, pressthe button again.
Note all menufunctions are notavailable in teletext
mode . Only afew direct buttoncontrol functions are
available in teletextmode, they are:
CH+
CH-
Volume adjustment
Mute function
Page up/down
Use the CH+/CH- buttons to browse next or previous page.
1
5
9
2
6
0
3
7
4
8
Page number entering
To select a Teletext page, enter the page number using
the numeric key pad on the remote control, or use the
CH+ or CH- buttons, or the coloured Fast text buttons.
MIX
Mix mode
To view the TV picture while in Text mode press the
button, this will superimpose the Teletext data on top
of the TV picture. Pressthis button againto return to
Full text.
INDEX
INDEX
Press the INDEX button to goto the indexpage of teletext.
Download from Www.Somanuals.com. All Manuals Search And Download.
TELETEXT
Teletext
MODE
Language change
Pressing the button will change the Teletext characters
between Eastern and Western.
Hold
Pressing the
HOLD
SIZE
button will stop the teletext page automa-
tically updating. This feature is very useful where there are
several teletext pages or data on the same page number.
Size
Pressing the
button changes between full screen top
half bottom half full screen. This feature is very useful as it
magnifies the image making the characters easier to read.
REVEAL
Reveal
Pressing the
button will reveal hidden text. This feature
is used to reveal information such as answers to Teletext
on-line interactive puzzles.
Time
TIME
While in normal TV mode only, pressing the button will
display the teletext time in the top right hand corner for a
few seconds.
Fast text coloured buttons
Fast text automatically displays the four most commonly
used pages that the broadcaster thinks that you may want
to choose next. Press the same coloured button on the
remote control as the coloured link at the bottom of the
teletext page to go directly to that page.
Subcode
Pressing the
enter a secondary page
button by entering its 4-digit number to
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Playback
Basic Playback
When pressing theD.CALL button repeatedly
different OSD indicator will bedisplayed for
different types of disc DVD, CD etc
Preparations
Operate the remote to set the TV to DVD status.
Stop playback
Note: The unit do not allow enter DVD mode again
(or place a DVD in the disc slot)after it have just left
to avoid any damage of the DVD. Wait for 10 seconds
to enter again.
1. Press STOP
button to go to stop mode, the
TV screen will show the start-up logo. For some
disc the player can recall the location where
stopped, such as DVDs and audio CDs.
2. Press PLAY to resume playback from the
location where playback is stopped.
Basic playback
Data Side
3. Press STOP twice to stop completely.
Previous and Next
During playback, press PREV
key can go
back to the beginning of this chapter, then each
press of this key will skip a chapter till the start of
the disc. (note: Disc function may vary
depending on disc format)
Each press of NEXT
key during playback will
skip the current chapter and play the next one.
1. Place the DVD in the disc slot as figure above.
The disc will be loaded automatically after one to
two seconds, then the DVD player reads the DVD
and displays the opening menu. If there is no
disc placed on the disc slot in DVD mode, OPEN
will display on the screen all the times)
There is only one disc size can be loaded in
the disc slot .
Fast forward and Fast reverse
1. Press FWD
to fast forward through the disc.
button is pressed, the fast
Each time the FWD
forward motion speed changes. It would cycle
through 2X, 4X, 8X, 16X, 32X and normal.
2. Press PLAY to resume normal playback.
3. Press REV
to fast reverse through the disc.
button is pressed, the fast
Each time the REV
Do not place a disc which is unplayable in
this DVD player.
reverse motion speed changes. It would cycle
through 2X, 4X, 8X, 16X, 32X and normal.
4. Press PLAY to resume normal playback.
Some disc may not playback automatically,
you can press PLAY button to start
playback.
2. Some disc may start playback with a menu,
use the cursor button on the remote control to
select menu options and press PLAY
to start, or press digits to select a menu
options directly.
Single step playback
1. Press the PAUSE/STEP button to pause the
playback.
2. To view the next frame, press thePAUSE/STEP
button. Each press of the PAUSE/STEP button
advances the film by one frame.
Pause playback
1. Press PAUSE/STEP to pause playback (still
mode). The sound will be muted during still mode.
2. Press PLAY/ENTER to resume normal playback.
ZOOM
Press this button can zoom enlarge or lessen the picture.
Each time pressed the picture times will be change.
In zoom mode press navigation buttons to move
the picture displayed on the screen
D.CALL
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Playback
Advanced Playback
IMPORTANT NOTE:
ALL DESCRIBING FUNCTION IS FOR DVD DISCS. IF YOU PLAY OTHER FORMAT DISC, THE
OPERATION AND DISPLAY ON SCREEN MAY DIFFERENT.
PROGRAM
SUBTITLE
Press " SUBTITLE ", the screen will display
"SUBTI-TLE 01/XX XXXXX", "01"
indicates the ordinal number of this
language; "XX" indicates total number of
language; "XXXXXX" indicates the language
of country.(the number of language depends
on disc). Thisfunction can select up to 32
languages displayed on screen.
When playing discs, press " PROGRAM "
to enter program mode. Press thedigit buttons
to select theprogram number thatyou want.
When finished, movethe cursor toselect
"START" . This willstart the programplayback.
If you wantto cancel thisfunction, press "STOP
" , then press "PLAY" .
SEARCH
REPEAT
Press "SEARCH" once to display the search menu.
Use the up/down navigation buttons to select the
item you require. Press PLAY to confirm
(CD press the search button several times to
select the item). And then press the numeric
buttons or navigation buttons to input the item
you require. Press PLAY to confirm.
Press REPEAT button multiple times to reach
desired play mode:
DVD
Chapter repeat, Title repeat, All repeat
CD
Single-play current track, Repeat One-repeat
current track, Repeat Folder-repeat current
folder, Folder-play current folder.
SLOW PLAY
Press SLOW to play a disc in slow forward. Each
time the SLOW button is pressed, the slow
motion speed changes.
REPEAT A-B
Press PLAY to resume normal playback.
Note: This function is invalid for CD .
Press A-B to mark the start-point, press again to
set an end point to complete setting. The
selected section A-B will be repeated
immediately. Press the Repeat A-B again to cancel
this function.
AUDIO
Press this key can change the audio mode.
such as: Audio 1/2: AC 3 2 CH English
Audio 2/2: AC 3 5.1 CH English
ANGLE
When enjoying sports, concert or theatre, press
this key to watch same actions in different angles.
(Valid for discs possessing this function. Using a
disc recorded in multi-angle you can view the
scene from different angles, for example, front,
side, whole view and exterior scene.)
If you play CD disc, press this button can cycle
among Mono Left, Mono Right, Mix-Mono and
Stereo.
Note: When press this button continuously, you must
above 3 seconds interval.
TITLE/PBC
D.MENU
With some DVD discs pressing this key will display
the title menu. You can then use the digit buttons to
select the item you prefer.
Press this key to display root menu, select item
according to your preference. (This function will
work with a DVD having a multi-layer menu.).
Download from Www.Somanuals.com. All Manuals Search And Download.
Special Function Playback
JPEG DISC PLAYBACK
Insert a picture CD or JPEG picture CD into the tray and the disc will be loaded
automatically. If the disc type can be identified, the player will start showing the pictures one by one
(slide show mode).If a navigation menu will be displayed use the navigation buttons to select a file,
then press the PLAY button.
Each picture in the CD will be displayed consecutively in a slide-show fashion and will be scaled to
fit in the whole TV screen. Some slide show transition modes are provided, use "PROGRAM" key to
select. Customer can set transition effects for each picture.
To display an image indefinitely, press the "PAUSE/STEP" key. To view the next or previous picture,
press "NEXT" or "PREV" key. To resume the slide show, press the " PLAY" key.
Press the STOP button to preview the photos in a folder. Press navigation buttons to rotate a picture.
SCREEN SAVER FUNCTION
If this unit is idle for 3 minutes, it will go to sleep mode with screen saver on. In this mode,
you can press any key on remote control or on front panel to activate the unit.
You can set Screen Saver function to Off in General Setup Page of dvd system
setup.
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD System Setup
DVD System Setup
General Setup Process
1.Press the SETUP button, the
General Setup Page, Preference
Page will be displayed in turn.
..General Setup Page..
SETUP
.
3/Ps
Tv Display 4:3 LB
4
.
3/Lb
Angle Mark
Osd Lang
Caption
On
ENG
On
4
2.Press to select, the
or
item, then press to enter the
16
9
submenu.
Screen Saver Off
or
3.Press to select then
press OK to confirm.
..Preference Page..
4.Press SETUP repeatedly to
exit the set-up menus.
Auto
PAL
AUTO
NTSC
TV Type
Parental
Password
Default
PLAY
OK
General Setup Page
ASPECT RATIO DESCRIPTION
When using the DVD with the internal TV,
select 4 3/LB.
..General Setup Page..
The following information applies only
when the DVD output is connected to an
external TV.
.
3/Ps
4
4
Tv Display 4:3 LB
SETUP
.
3/Lb
Angle Mark
OSD Lang
Caption
On
ENG 16
On
9
Screen Saver Off
Hdcd Off
Last Memory On
4
3/PS (PS = Pan and Scan)
You may select this if you have a normal
aspect ratio (4:3) TV, although the NORMAL
/LB (letter box) is a more common choice. In
PS mode, widescreen material will fill the screen, but at the expense of
chopping off extreme left and right edges of the original film picture. For this
feature to work, the disc must be specially coded. Such discs are uncommon.
PLAY
OK
4
3/LB (LB = Letter Box)
You may select this if you have a normal aspect ratio (4:3) TV. Widescreen
material will be shown in pure unaltered form, allowing the entire picture area
of the original film to be viewed without any side cropping. Black bars will
appear above and below the picture.
16
9
You may select this if you have a widescreen (16:9) TV. Back bars may still
appear above and below the picture even if using a widescreen TV. This is
because some film directors prefer to use ultra widescreen aspect ratios e.g.
2.35:1. This will normally be indicated on the DVD packaging.
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD System Setup(Continued)
DVD System Setup
..General Setup Page..
Tv Display 4:3 LB
General Setup Page
Angle Mark
Osd Lang
Caption
On
ENG
On
On
Off
Angle Mark: Users can select a particular
camera angle when playing a DVD which offers
.
multiple angles.
Screen Saver Off
Hdcd Off
Last Memory On
This item allows you to set Angle Mark On or Off.
..General Setup Page..
Tv Display 4:3 LB
On Screen Display (OSD) Language: Users
can select on-screen display language.
Angle Mark
OsdLang
Caption
On
ENG
On
English
French
German
Spanish
Italian
Screen Saver Off
Hdcd Off
Last Memory On
(The languages youcan select maydiffer from different
countries or models)
..General Setup Page..
Tv Display 4:3 LB
Angle Mark
Osd Lang
Caption
On
ENG
On
Caption: This function allows you to
display or hide the caption.
Screen Saver Off
Hdcd Off
Last Memory On
..General Setup Page..
Tv Display 4:3 LB
Screen Saver: If the screen saver is on,then there
will be an animated picture of DVD on the screen
whenever the DVD player is idle for more than 3
minutes .
Angle Mark
Osd Lang
On
ENG
Caption
On
Screen Saver Off
On
Off
Hdcd
Off
Last Memory On
..General Setup Page..
Tv Display 4:3 LB
Hdcd: When default setting is off, it will display CD
by reading HDCD, for HDCD playback, please
choose 1X or 2X.
Angle Mark
Osd Lang
On
ENG
Caption
On
Screen Saver Off
Hdcd
Off
Off
1X
2X
Last Memory On
..General Setup Page..
Tv Display 4:3 LB
Last Memory: Memorize the chapter you have
just watched. When last memory is on, if you turn
on the DVD again after off it will display form the
chapter you watched when you turn off the DVD.
Angle Mark
Osd Lang
On
ENG
Caption
On
Screen Saver Off
Hdcd
Off
Last Memory On
On
Off
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD System Setup(Continued)
DVD System Setup
Preference Page
The Preference Page is only available when there is no disc
in the player. These settings are applied consistently to all
discswhichareinsertedandplayed.
..Preference Page..
TV Type: This player
supports different TV output,
including AUTO, NTSC, and
PALsystems.
Usually please set to MULTI.
Auto
PAL
AUTO
NTSC
TV Type
Parental
Password
Default
SETUP
Parental: The parental
control function works in
conjunction with the
..Preference Page..
different censorship classes
assigned to DVDs. These
classes help to control the
types of DVDs that the family
watches, There are up to 8
censorship classes for DVDs.
2 G
3 Pg
4 Pg 13
5 Pgr
6 R
7 Nc17
8 Adult
Off
Auto
TV Type
Parental
Password
Default
PLAY
OK
Note:
1 To change this setting you must enter your password.
(Initial password is 0000)
2 When set to Off, all discs may be viewed.
Password change:
..Preference Page..
You can change your password
by entering 4 digits. Your must
confirm the 4 digits before the
new password can be accepted.
Auto
TV Type
Parental
Password
Default
Change
Old Password
New Password
Confirm Pwd
NOTE:If you forgetyour password
or a password is accidentally set
enter 1369 as the password. This
will enable you to regain control.
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD System Setup(Continued)
DVD System Setup
Default: Resets all settings
(except password and parental
lock status) for this DVD player
back to the manufacturers
original settings. Press
OK to perform the reset.
..Preference Page..
SETUP
Auto
TV Type
Parental
Password
Default
Reset
Note:
Some functions may not be available depending on the type of disc.
PLAY
OK
Download from Www.Somanuals.com. All Manuals Search And Download.
Playable Discs
The following discs can be played:
Support discs: DVD, CD-R, CD-RW, HDCD, JPEG, CD+G, Kodak CD , W MA.
You cannot play discs other than those listed above.
You cannot play non-standardized discs, even if they may be labeled as above.
The performance of CD-R or CD-RW disc is depend on the way of disc-burning. In a few
cases, their performance may not be very well or even not playable.
Download from Www.Somanuals.com. All Manuals Search And Download.
Dics Protection and DVD Characteristics
Compare DVD disc with other discs:
DVD
LD
Encode
method
Digital/MPEG
Analog
Single- Double Single- Double-
side
-side
side
side
Capacity
single- single double- double-
layer
4.7G
-layer layer
layer
17G
8.5G
9.4G
Single-side
60 minutes
double-side
120 minutes
133
242
266
484
minutes minutes minutes minutes
Playing Time
Disc diameter
12cm
30cm/20cm
No more than
430 line
Horizontal
resolution
More than 500 line
Picture
proportion
One kind
Multiple kinds
32 kinds
16 kinds
at most
Subtitle
48KHz, 96KHz/
6, 20, 24bit
44.1KHz/
16bit
Sound quality
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting Guide
To assist in location possible faults use help guide below.
Troubleshooting
Verify ifthe television isproperly plugged in.
Verify ifthe television hasa proper suppliedpower source.
Verify ifelectricity is available.
No picture, no sound
Verify if correct signals are input.
Operate the remote to change signal input to correct input.
Restart the television if power supply is interrupted.
Blank screen
Press MUTE button and verify if Mute mode is set.
Switch to other channel and verify if the sameproblem
happens.
No sound
Press VOL+ button to see if the problem can be solved.
Verify ifsound system iscorrect. Refer touser's manual
for adjustment.
Poor sound
Verify ifcorrect channel isselected.
Adjust the antenna.
No picture in some
channel
Verify if the same problem exists in other channels.
Check out of picture and sound systems.
Refer to relative instructions in the Manual for color
adjustment.
No color for some channel
program (black and white)
Verify ifthe antenna iscorrectly connected.
Verify ifthe antenna isin good condition.
Make fine adjustmentof channel.
Spots with some or
all pictures
Disconnect the televisionfrom power supplyand 10
seconds later, connect the televisionto the powersupply.
If the problemstill exists, contactauthorized after-sales
service for technicalassistance.
Television out of control
Note:
1.If the fault can not be repaired using the above guide consult with your local authorized service
center.
2.The TV set must only be repaired by a qualified registered service person. Never attempt to
remove the back cover as the TV set has dangerous voltages in side that may cause a fatally or fire.
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Specifications of the television that you have just purchased may
vary from the information in this table due to technical innovations.
15
15.4
19
22
Model
Picture, sound
system
PAL/SECAM-B/G,I,D/K,L,L
1.5W+1.5W
Audio output
COMPONENT input PC input S-VIDEO input Audio input
SCART Antenna input HDMI input
External input port
~150-240V 50/60Hz
Power requirements
Power consumption
Temperature
50W
60W
70W
Working:5 C~35 C
Storage:-15 C~45 C
Working:20%~80%
Storage:5%~90%
Humidity
Remote control
Batteries
Owner's manual
Accessories
Note:
All specifications aresubject to changewithout notice.
All quality areapproximate value.
Download from Www.Somanuals.com. All Manuals Search And Download.
V0.1
0090502138
Download from Www.Somanuals.com. All Manuals Search And Download.
|