Haier TV Converter Box 25F3A User Manual

25F3A-T  
25T3A-T  
25F3A  
25T3A  
COLOUR TV RECEIVER  
OWNER'S MANUAL  
MAIN FUNCTIONS  
SlideCurtain PowerOn/Off Display  
218ChannelsPreset  
Multiple Picture&SoundModes  
On/OffTimer  
Child Lock  
Soft Change Channel Function  
CountTime  
ChannelsAppointment  
DVDVideoComponentInputTerminals  
Please read this manual carefully before operating  
the unit, and keep it for future reference.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warning and Cautions  
1. When you clean the TV set, please  
pull out the power plug from AC outlet.  
Don't clean the cabinet and the  
screen with benzene, petrol and other  
chemicals.  
4. To prevent the TV set from firing  
and electric shock, don't expose the  
TV set to rain or moisture.  
2. In order to prolong the using life of  
the TV set, please place it on a  
ventilated place.  
5. Don't open the back cover,  
otherwise it is possible to damage the  
components in the TV set and harm  
you.  
6. When the TV set isn't going to be  
used for long time or it is in thunder  
and lightening, please pull out the  
plug from AC outlet and the antenna  
plug from the cover of the TV set.  
3. Don't place the  
TV set in the  
sunshine or near  
heat source.  
Explanation on the display tube  
In general, it is not needed to clean the tube surface. However, necessary,  
it's surface can be cleaned with a dry cotton cloth after cutting off the power.  
Don't use any cleanser. If using hard cloth, the tube surface will be damaged.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Antenna connection  
Generally speaking, to enjoy a clearer picture, we recommend that you use a CATV  
system or an outdoor antenna .In different places, the suitable antenna type and position  
are different.  
300 twin-lead cable  
Antenna adapter  
75 coaxial cable  
Mixer  
additional  
purchase  
Antenna input  
75 standard  
coaxial type  
Plug  
(additional purchase)  
AC power socket  
Note  
* It is recommended that you'd better use 75 coaxial cable to remove the  
disturbance caused by airwave.  
* Don't bind antenna cable and electric wire together.  
Preparation for the remote control  
Battery installation  
Tips for remote operation  
!
!The battery life should be about one year  
Remove the batteries cover.  
undernormaluse.  
!
Insert two size AA batteries matching  
the +/-polarities of the battery to the +/-  
marks inside the battery compartment.  
! When the remote control will not be used  
for a long period of time or when the  
batteries are worn out, remove the batteries  
topreventleakage.  
!
Do not throw the batteries into a fire.  
Dispose of used batteries in the specified  
manner.  
! Do not drop, dampen or disassemble the  
remotecontrol.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Position of Keys and Plug-ins  
Front panel  
Video  
Menu  
TV/AV  
switch  
Volume  
up/ down  
Channel  
position up/down  
R/L  
audio  
Signal receiver  
Power  
switch  
Power indicator  
Please do not use the side and back AV terminals simultaneously.  
Back panel  
Video Cb input terminal  
Video Y input terminal  
Video Cr input terminal  
Antenna input socket  
Video input terminal  
Audio channel inputterminal  
Video output terminal  
S-VIDEO input terminal  
Audio channel outputterminal  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Remote Control  
Buttons and Descriptions  
TV and AV Exchange Button  
Toexchange between TVand  
other available videoinputs  
Mute Button  
TV/AV  
DISP  
SYSTEM  
SCAN  
Press to conceal the sound of programs.  
-/--  
Screen Display Button  
System Adjust Button  
Direct-digit Choosing Button  
Directly select channel numbers  
Lock Setting button  
Used for settinglock for channel-  
searching, channel,AVand clock,etc.  
Picture Mode SelectButton  
There are DYNAMIC, STANDARD,  
MILD,MEMORY, PICTURE MUTEand  
COLOR MUTE sixmodes of picture.  
LOCK  
P.STD  
WATCH  
S.STD  
Menu Select/Adjust Button  
Use this buttonto adjust themenu,  
the volume andthe channels, aswell  
as to controlthe game.  
Chromaic Belt LengthAdjust Button  
(not available)  
CH+  
Program Play-forward Button  
Calendar  
VOL-  
VOL+  
MENU  
CH-  
Game Background SelectButton  
BAR Button(not available)  
Fire Button(can call the calendar)  
HIT  
WID  
Background Lamp ControlButton  
(not available)  
Restart Game Button  
BACK  
PRE  
Game Exit Button  
Program Play-backward Button  
Chromatic Belt Width Adjust Button  
(not available)  
Sound Mode Select Button  
CALENDAR  
BAR  
MODE  
FIRE  
RESTART  
FIRE  
EXIT  
There are high,normal and low three  
LIGHT  
kinds of sound modes.  
Stopwatch Button  
The stopwatch canwork 1 hourwithout  
interruption and whenyou use this  
function,do not operateother  
function button aswell.  
Digit Select Button  
Change the channel position number  
between one digit, two-digits and three  
-digits.  
Program Scan Button  
DC Standby Button  
Sleep TimerButton  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Power On and Power Off  
Below are methods on how to power on/off the TV set with the switch on the TV and  
on the remote control.  
Power on/off  
Connect/disconnect to the power  
1.Connect the power supply wire, then press  
power switch button, the red power indicator will  
light, in several seconds the picture will appear  
Signal receiver  
Power  
switch  
on the screen.  
Power indicator  
2. If the TV is in the state of standby, press the  
button on the remote control.  
NOTE  
1.You can also press the 0-9  
button to call off the standby  
status instead of pressing the  
DC Standby button. Press the  
digit button of the preset channel  
(limited to one digit) , you can  
Menu  
TV/AV  
switch  
Volume  
up/ down  
Channel  
position up/down  
complete the selection of channel while you turn on the  
TV set( To operate the preset of TV channel, please see  
TUNING on page 9-12).  
2.When you do not use the remote control, you can  
directly press the the button on the television to call off  
the standby status.  
3. Press the button on the remote control  
to get into the standby state.  
DC Standby Button  
4. Press the button on the TV set to  
completely turn off the TV.  
Power supply auto-off function  
When the B.B(black background) is set ON,  
and there is no signal , game screen protection  
works, and ,in15 minutes later, it will change  
into standby status.  
Direct-digit Choosing Button  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Viewing TV Programs  
The channels amount to 218(0-218).  
Viewing TV programs  
How to select the TV program  
1.Use the direct-digit choosing button  
Press the button from 0-9 to select a one digit channel.  
If you want to select a two-digits channel, press the  
Digit Select button and change it into two-digits mode,  
then press the number of the channel.  
If you want to select a three-digits channel, press the  
Digit Select button and change it into three-digits mode,  
then press the number of the channel.  
If the channel position number you select is larger than 218,  
the TV will use the first two number as the channel position.  
2.Use CH+/- button  
Direct-digit Choosing  
button  
Press CH+ to increase the channel position number.  
Press CH- to decrease the channel position number.  
3.Use PRE button and BACK button  
Press PRE button, you can go back to the channels you  
viewed (as many as four).  
Digit Select  
button  
Then, press Back button, you can return to the channels you  
were watching just now (as many as four) .  
PRE  
BACK  
For example, if you have viewed channel 1,2,3,4,5,6 after the  
TV is powered on, and the channel you are watching now is  
number 7, then press PRE button, you can view channel 6,5,  
4,3, and you may press the Back button to return to channel 7.  
Choose the proper volume you like  
Press VOL+/- button to adjust the volume.  
If tne VOL STORE is set ON, the volume of  
the pre-fifty channel will be stored  
independently.  
Press VOL+ to increase the volume, press  
VOL- to decrease the volume.  
SYSTEM  
VOLUME  
If the color or sound of one channel is abnormal  
It might be because the color or sound  
system has been set improperly.You may  
follow the instructionbelow to adjustit.  
Press SYSTEM button, and you can see  
COLOR AUTO  
SOUND DK  
the form.  
CH+  
select adjust  
If the color of the picture is abnormal  
Press CH+/- button, and move the indicator  
to COLOR,  
and press VOL+ button to select the proper color(AUTO,PAL,  
SECAM,NTSC4.43 and NTSC3.58 will appear alternately).  
VOL-  
VOL+  
MENU  
CH-  
If the sound is abnormal  
Press CH+/- button, and move the indicator  
to SOUND, and press VOL+/- button  
to select the proper sound (DK and BG will  
appear alternately).  
COLOR AUTO  
SOUND DK  
select adjust  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Viewing TV Programs(coutinued)  
Program scanning function is to let the television automatically scan all  
preconcerted channel program(abouttwo seconds perchannel).  
Program scan and screen display  
Program scanning function  
1.If you want to scan the programs  
and select your favorite channel ,  
just press the SCAN button, then  
the television will start scanning  
SCAN  
from the present channel with a  
rate of two seconds per channel  
and until all the preconcerted  
programs have been displayed  
once, the TV set will return to the  
starting channel.  
2.If you want to terminate this  
function during the scanning, press  
the SCAN button again, and the  
program will stay at the present channel.  
Screen display  
DISP  
Usually, when you press the DISP button, the channel  
number will appear on the top right corner of the screen  
and press it again, the screen's top left corner will  
display the presenttime( the adjustmentof time please  
see Setting the Timer ).If press it for a third time, the  
channel number and time will both disappear .  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tuning  
There are three ways of searching: automatic search, manual search and MFT  
(manual fine tune).  
You may operate it either on the TV or on the remote control. Here is mainly about  
the remote control.  
Automatic search  
Automatic search  
1. Press MENU button, untill  
TUNING appears on the screen.  
TUNING  
POSITION  
BAND  
SKIP  
1
UHF  
OFF  
UP  
SEARCH  
MFT  
AUTO MEMORY  
CH+  
DOWN  
VOL-  
VOL+  
MENU  
CH-  
2. Press CH+/- button to move  
the indicator( )to  
AUTO MEMORY.  
TUNING  
POSITION  
BAND  
SKIP  
1
UHF  
OFF  
UP  
SEARCH  
MFT  
AUTO MEMORY  
DOWN  
3. Press VOL+, then  
AUTO MEMORYmode will work.  
The TV set will search  
automatically all available  
programs, after that, all  
available programs will be  
stored in turn and the TV set  
will return to the first channel.  
ASM  
VHFL  
0
STOP  
If you want to stop the search, just press VOL- button.  
The order of the automatic search is due to the frequency  
of the program, generally speaking, it is used only at the  
first time you search the program, and once the order of  
the program has been confirmed, you don't have to use  
this function, otherwise the order of the program will be  
changed.  
CH+  
After searching  
VOL-  
VOL+  
MENU  
CH-  
Press CH+/- button to check the channels.  
If the color or sound is abnormal in a certain channel, it  
may be the color or sound system has not been set properly,  
so you should adjust it to the proper system (Reference to  
page 7).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tuning(coutinued)  
Manual search  
Manual search  
1. Press CH+/- button or the Direct-digit Choosing button to  
select a channel directly(take channel 1 for example).  
CH+  
2. Press MENU button, until  
TUNING  
TUNING appears on the screen.  
VOL-  
VOL+  
MENU  
CH-  
POSITION  
BAND  
SKIP  
1
UHF  
OFF  
UP  
SEARCH  
MFT  
AUTO MEMORY  
DOWN  
3. Press CH- button and move  
the indicator( ) to SEARCH.  
TUNING  
POSITION  
BAND  
SKIP  
1
UHF  
OFF  
UP  
SEARCH  
MFT  
AUTO MEMORY  
DOWN  
Direct-digit Choosing  
Button  
4. Press VOL+/- button to start  
searching.  
TUNING  
VOL- button is used to search the  
lower frquency channel.  
VOL+ button is used to search the  
higher frequency channel.  
Repeat the steps until you find  
the channel you need.  
POSITION  
BAND  
SKIP  
1
CH+  
UHF  
OFF  
UP  
SEARCH  
MFT  
AUTO MEMORY  
DOWN  
VOL-  
VOL+  
MENU  
CH-  
5.When you plan to store  
another new channel at a new  
place, use CH+/- button and  
move the indicator( ) to  
POSITON, then press VOL+/-  
button to select a channel  
number and press CH+/- button  
to move to SEARCH, then  
repeat the fourth step.  
TUNING  
POSITION  
BAND  
SKIP  
1
UHF  
OFF  
UP  
SEARCH  
MFT  
AUTO MEMORY  
DOWN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tuning(coutinued)  
MFT  
MFT(manual fine tune)  
When you can't get a satisfactory picture and audio effect,  
you can fine tune to obtain.  
CH+  
VOL-  
VOL+  
MENU  
CH-  
1. Press CH+/- button or the  
Direct-digit Choosing button  
to select a channel directly (take  
channel 1 for example).  
2. Press MENU button, until  
TUNING appears on the screen.  
TUNING  
POSITION  
BAND  
SKIP  
1
UHF  
OFF  
UP  
SEARCH  
MFT  
AUTO MEMORY  
DOWN  
Direct-digit Choosing  
Button  
3. Press CH+/- button and move  
the indicator( ) to MFT.  
TUNING  
POSITION  
BAND  
SKIP  
1
CH+  
UHF  
OFF  
UP  
SEARCH  
MFT  
AUTO MEMORY  
DOWN  
VOL-  
VOL+  
MENU  
CH-  
4. Press VOL+/- button repeatedly to fine tune, until the  
picture and the sound become satisfactory.  
VOL- button is used to search the lower frquency channel.  
VOL+ button is used to search the higher frequency channel.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tuning(coutinued)  
Skip  
Skip  
After the programs are presetted, you can skip some  
programs so that to select your favorite channels only.  
1. Press CH+/- button or  
Direct-digit Choosing button to  
select a channel directly (take  
channel 1 for example).  
TUNING  
POSITION  
BAND  
SKIP  
1
UHF  
OFF  
UP  
2. Press MENU button, until  
TUNING appears on the screen.  
SEARCH  
MFT  
AUTO MEMORY  
DOWN  
Direct-digit Choosing  
Button  
TUNING  
3. Press CH+/- button and move  
the indicator( ) to SKIP.  
POSITION  
BAND  
SKIP  
1
UHF  
OFF  
UP  
SEARCH  
MFT  
AUTO MEMORY  
DOWN  
CH+  
4. Press VOL+/- button to set it  
ON.  
TUNING  
VOL-  
VOL+  
MENU  
CH-  
POSITION  
BAND  
SKIP  
1
UHF  
ON  
UP  
SEARCH  
MFT  
AUTO MEMORY  
DOWN  
5. Press MENU button to close the menu. When you  
select channels with CH+/- button, this channel will be  
skipped. However, you can also use the Direct-digit Choosing  
button on the remote control to select this channel ditectly.  
If you want to recover the skipped channel  
1. Use Direct-digit Choosing button to select the number of the  
channel to be recovered.  
2. Do the above steps again.  
3. Press VOL+/- button to set SKIP OFF.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting the Picture and the Sound  
Multiple picture modes  
DYNAMIC  
How to select the picture mode  
You may select the mode you want from the  
five preset modes and one individual mode.  
STANDARD  
P.STD  
MILD  
Press the P. STD button to select a mode you  
like.DYNAMIC PICTURE, STANDARD  
PICTURE, MILD PICTURE, MEMORY,  
PICTURE MUTE and COLOR MUTE,  
totally six picture modes can be selected  
alternately.  
MEMORY  
PICTURE MUTE  
COLOR MUTE  
MODE  
DYNAMIC  
STANDARD  
MILD  
PICTURE QUALITY  
BRIGHT COLOR  
MEDIUM COLOR AND BRIGHTNESS  
LOW COLOR AND BRIGHTNESS  
SET BY YOURSELF  
MEMORY  
PICTURE MUTE NO PICTURES  
BLACK AND WHITE  
COLOR MUTE  
If the picture mode is set to PICTURE MUTE or COLOR  
MUTE,it will autorenew to MEMORY mode when you  
restart your TV set.  
Set the parameter of MEMORY  
1. Press MENU button, until PICTURE appears on the screen.  
CH+  
PICTURE  
VOL-  
VOL+  
MENU  
CH-  
CONTRAST  
BRIGHT  
COLOR  
SHARP  
B.B  
100  
50  
50  
50  
2. Press CH+/- button, move the  
indicator( ) to the option you  
want to adjust, then press  
VOL+/- button to do the  
ON  
adjustment.Then the parameter will be automatically stored  
in MEMORY option.  
VOL+  
OPTION  
VOL-  
CONTRAST  
BRIGHT  
COLOR  
STRONG  
BRIGHT  
THICK  
WEAK  
DARK  
LIGHT  
SOFT  
SHARP  
SHARP  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting the Picture and the Sound  
(coutinued)  
Multiple Sound Modes  
How to select the sound mode  
You can quickly select you most favored  
NORMAL VOL  
sound mode from the following three  
kinds of modes.  
S.STD  
Press the S.STD button to select the  
sound quality that you want.NORMAL  
VOL,HIGH VOL and LOW VOL can be  
selected in turn(their parameter may  
be adjusted due to your need).  
HIGH VOL  
LOW VOL  
Setting the sound  
This function can let you regulate the volume to the  
preconcerted parameter quickly( such as the NORMALVOL,  
HIGH VOL or LOW VOL).  
1.Press MENU button, until  
FUNCTION 1 appears on the  
screen.  
FUNCTION 1  
LANG.  
CURTAIN  
LOW VOL  
ENGLISH  
III  
00  
CH+  
NORMAL VOL  
HIGH VOL  
VOL STORE  
00  
00  
OFF  
2.Press CH+/-button, move  
the indicator( )to the HIGH  
VOL, then pressVOL+/-  
button to adjust the parameter  
you expect. Withthe same  
method, you can adjust the  
parameter of theNORMAL  
VOL or the LOW VOL.  
VOL-  
VOL+  
MENU  
CH-  
FUNCTION 1  
LANG.  
CURTAIN  
LOW VOL  
ENGLISH  
III  
00  
NORMAL VOL  
HIGH VOL  
VOL STORE  
00  
00  
OFF  
Suppose the LOW VOL is A,  
NORMAL VOLis B, HIGH  
VOL is C, then that will be:  
0
A
B
C 100  
When adjusting thethree modes,you shouldpress them in  
proper order asHIGH VOL,NORMAL VOL, LOW VOL.  
3.Press the S.STD button repeatedly to select the  
different sound setting modes.  
S.STD  
Volume store  
When the VOL STORE( as above chart) is set ON, the  
sudden change of the volume can be avoided when you  
change the channel(only the pre-50channels volume).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting the Picture and the Sound  
(coutinued)  
S.C.C, count and mute  
How to use the S.C.C(soft change channel)  
This TV set provides you with the function of S.C. C.  
When it is set "ON", the picture will fade in and fade  
out when the channel is changed.  
CH+  
1.Press MENU button, until  
FUNCTION 2 appears on the  
screen.  
FUNCTION 2  
SUBMARINE  
POS.EX.  
S.C.C  
COUNT  
VOL-  
VOL+  
MENU  
CH-  
OFF  
0:00  
2.Press CH+/-button, move  
the indicator( ) to the S.C.C,  
then press VOL+/-button to  
set it ONor OFF.  
How to use the COUNT function  
This TV set provides youwith the functionof COUNT,  
if you want to know how long your TV set has been  
used, you can press MENU button, and find  
FUNCTION 2 , then you canknow the timethe TV has  
been on(count from0 after 100,000hours).  
The time displayed is the total time when you watch the  
TV(time of standby status will not be included), the  
number cannot be altered through operating by the  
remote control oron the TV set.  
How to use the MUTE function  
When you want to pay attention to the environment or  
answer a telephone, or to meetguests, using themute  
function is veryconvenient.  
1.Press  
button, a sign will  
appear at the button left corner  
of the screen, and the sound of  
the TV set is cutoff.  
2.In order to recover the sound, press button again  
or press VOL+/-button.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the Timer  
This TV set provides you with three timer functions such as timer on, timer off  
and sleep off.  
Timer off  
Timer off  
Using this function can turn the TV set automatically  
into standby status at the preconcerted time.  
1.Press MENU button, until  
TIMER  
TIMER appears on the  
screen.  
OFF TIMER OFF  
19:00  
ON TIMER  
OFF  
22:00  
0
CH+  
POS  
CLOCK  
APPOINTMENT  
1:40  
VOL-  
VOL+  
MENU  
CH-  
2.Press CH+/-button, move  
the indicator( )to OFF  
TIMER, then pressVOL+/-  
button to set it ONCE ,  
EVERY,or OFF.  
TIMER  
OFF TIMER ONCE  
19:00  
ON TIMER  
OFF  
22:00  
0
POS  
CLOCK  
APPOINTMENT  
1:40  
3.Press CH-button, move  
the indicator( )to the next  
row. Then, press VOL+/-  
button to set the time.  
TIMER  
OFF TIMER ONCE  
19:30  
ON TIMER  
CH+  
OFF  
22:00  
0
POS  
CLOCK  
APPOINTMENT  
VOL-  
VOL+  
MENU  
CH-  
1:40  
4.Press CH+/-button, move  
the indicator( )to CLOCK,  
press VOL+/- button, and you  
can set the time(It will be the  
standard of the clock of  
TIMER  
OFF TIMER ONCE  
19:30  
ON TIMER  
OFF  
22:00  
0
TIMER ON/OFF).  
POS  
CLOCK  
APPOINTMENT  
1:40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the Timer (coutinued)  
Sleep timer and timer on  
Sleep timer  
Using this function, the TV set can be changed into the  
standby status after a period of preset time from when  
this function is activated.  
1.The utmost time for this function is  
120 minutes, and the time interval is  
10 minutes.There are totally 12 kinds  
of off-time.  
2.Press the  
button repeatedly,  
the screen will show in turn as the  
right form.  
Timer on  
When this function is used, the TV set can  
automatically turn the power on at the preset time in  
the standby statusand display thepreset program.  
1.Press MENU button, until TIMER appears on the  
screen.  
CH+  
2.Press CH+/-button, move  
the indicator( )to the ON  
TIMER, then pressVOL+/-  
button to set it ONCE ,  
EVERY or OFF.  
TIMER  
VOL-  
VOL+  
MENU  
CH-  
OFF TIMER EVERY  
19:00  
ON TIMER  
EVERY  
22:00  
0
POS  
CLOCK  
APPOINTMENT  
3.Press CH-button, move  
the indicator( ) to the below.  
Then, press VOL+/-button to  
set the time.  
1:40  
4.Press CH+/- button, move  
the indicator( )to  
CH+  
TIMER  
POS 0, pressVOL+/-  
button to set the channel  
with which the TV is turned  
on(take 5 forexample).  
OFF TIMER EVERY  
19:00  
VOL-  
VOL+  
MENU  
CH-  
ON TIMER  
EVERY  
22:00  
5
POS  
CLOCK  
APPOINTMENT  
1:40  
5.Press CH+/-button, move  
the indicator( )to CLOCK,  
press VOL+/- button, and you can set the time(same as  
TIMER OFF and it will be the standard of the clock of  
TIMER ON/OFF).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the Timer (coutinued)  
The channels appointment function can help you conveniently preset as many  
as six programs at a time. At the preset time, the TV set will automatically  
change to thepreconcerted channel. Iftwo or moreprograms are setin a same  
time, the last channel number will be selected.  
Channels appointment  
Channels appointment  
1.Press MENU button, until  
TIMER appears on the  
TIMER  
screen.  
OFF TIMER EVERY  
19:00  
CH+  
ON TIMER  
EVERY  
22:00  
0
2.Press CH+/-button, move  
the indicator( )to CLOCK,  
press VOL+/- button, and you  
can set the time(same as  
TIMER OFF and it will be the  
standard of theclock ofAPPOINTMENT).  
POS  
CLOCK  
APPOINTMENT  
VOL-  
VOL+  
MENU  
CH-  
1:40  
APPOITMENT  
POS  
100  
000  
000  
000  
000  
000  
TIME  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
3.Press CH+/-button, move  
the indicator( )to  
APPOINTMENT, then press  
VOL+ button to enter the  
sub-menu.  
4.Press VOL+/- button to set  
the channel number you want  
(e.g. 100).  
APPOITMENT  
CH+  
POS  
100  
000  
000  
000  
000  
000  
TIME  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
5.Press CH- button to enter  
the TIME item.Press VOL+/-  
button to set the time.  
VOL-  
VOL+  
MENU  
CH-  
Repeatedly press VOL+/-button,  
the time changeswith a rateof  
one minute;  
Press the buttonwithout  
releasing, the timechanges with  
a rate often minutes.  
APPOITMENT  
POS  
100  
000  
000  
000  
000  
000  
TIME  
12:58  
OFF  
OFF  
OFF  
OFF  
OFF  
6.Press the CH- button, and  
follow the instructions of step  
4 and 5, you can do the setting  
of the next channel.  
DISP  
7.Press DISP button to exit  
the TIMER menu.  
At the presettime, the TV set willautomatically change  
to the preconcertedchannel;  
This function is available onlywhen the TV set ison, and  
it cannot beused in thestatus of standbyor power off.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the other Function  
Language and screen protection  
How to select the language on the screen  
1.Press MENU button, until  
FUNCTION 1 appears on the  
screen.  
LANG.  
ENGLISH  
CURTAIN  
LOW VOL  
NORMAL VOL  
HIGH VOL  
VOL STORE  
CH+  
III  
00  
00  
00  
OFF  
VOL-  
VOL+  
MENU  
CH-  
2.Press CH+/-button, move  
the indicator( )to LANG., thenpress VOL+button to  
select the language and the menu on the screen will  
be displayed withthe language youselect.  
How to activate the function of screen protection  
If no signal has been received  
by the TV set,when theB.B  
function is set ON, the screen  
will change into the form on  
the right shows( game  
CH+  
background ) .  
VOL-  
VOL+  
MENU  
CH-  
Press MENU button, until  
PICTURE  
PICTURE appears on the  
screen. Then press CH-  
button to move the indicator  
( ) to B.B, and press  
VOL+/- button toset it ON.  
CONTRAST  
BRIGHT  
COLOR  
SHARP  
B.B  
100  
50  
50  
50  
ON  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the other Function(continued)  
Curtain function and calendar display  
How to use the Curtain function  
This TV set provides three types of Curtain function  
for you toselect.  
1.Press the MENU button, until the FUNCTION 1  
appears on the screen.  
CH+  
VOL-  
VOL+  
MENU  
CH-  
2.Press CH+/-, and move the  
indicator( ) to CURTAIN,  
then press VOL+ to select  
from I,II and III.  
I: curtain  
II : fade in and fade out  
III: mixed I and II  
FUNCTION 1  
LANG.  
CURTAIN  
LOW VOL  
ENGLISH  
III  
00  
00  
00  
NORMAL VOL  
HIGH VOL  
VOL STORE  
OFF  
How to use the CALEDAR function  
This TV set has been designed to store the calendar  
from the year 1901 to 2050.  
CALENDAR  
1.Press the CALENDAR  
OCT 2002  
button and then the  
calendar will appear on  
the screen(Press the  
SU  
MO  
TU  
WE TH  
FR  
SA  
CALENDAR button again  
to conceal the display).  
YEAR  
MONTH  
CH+  
2.Press CH+/- button to adjust the YEAR,press VOL+/-  
button to adjust the MONTH.  
VOL-  
VOL+  
MENU  
CH-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the other Function(continued)  
The function of channel exchange will enable you to exchange any two programs  
and you can conveniently adjust the order of the programs due to your own need.  
Channel exchange  
Channel Exchange  
for example, to change between channel1 and 9  
1.Press MENU button, until  
FUNCTION 2 appears on the  
screen.  
FUNCTION 2  
CH+  
SUBMARINE  
POS.EX.  
S.C.C  
COUNT  
OFF  
0:00  
VOL-  
VOL+  
MENU  
CH-  
2.Press CH+/-button, move  
the indicator( )to POS.EX.,  
Then press VOL+button to  
enter the sub-menu.  
POS.EX.  
EX.POS1  
EX.POS2  
EXCHANGE  
RETURN  
1
1
?
The number shown in  
EX.POS1 and EX.POS2is the  
number of thepresent channel.  
3.Press CH+/- button, move  
the indicator( ) to EX.POS2,  
then press VOL+ button to set  
the channel number to 9.  
POS.EX.  
EX.POS1  
EX.POS2  
EXCHANGE  
RETURN  
1
9
?
Direct-digit Choosing  
Button  
CH+  
VOL-  
VOL+  
MENU  
CH-  
4.Press CH+/- button, move  
the indicator( ) to  
EXCHANGE, then press VOL+  
button to confirm.Then the  
programs of the two channel  
will be exchanged.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the Lock  
This TV set provides you with the LOCK function, you can choose it due to your  
need to protectyour TV set.  
Changing your password  
Changing your password  
This TV set can set a four digit password, the original  
one is 0000, if you want to reset it, please follow the  
instructions below.  
LOCK  
LOCK OR UNLOCK  
PASSWORD ----  
1.Press LOCK button, the  
screen will showas the form  
on the right.  
CH+  
2.Press the 0 buttonfour times,  
LOCK OR UNLOCK  
and enter the menu of LOCK  
CHANGE PASS.  
VOL-  
VOL+  
MENU  
CH-  
setting. Press CH+/- button  
and move theindicator( ) to  
CHANGE PASS. , and press  
VOL+ button to enter the  
sub-menu of change  
SEARCH LOCK OFF  
POS LOCK  
AV LOCK  
ON  
OFF  
ON  
TIMER LOCK  
CHILD LOCK  
ALL CLEAR  
OFF  
OFF  
password.  
3. Press the Direct-digit  
Choosing button and input a  
four-digits password.  
CHANGE PASS.  
NEW PASS.  
----  
4. After inputting the new  
password, return to the  
original status as shown on  
the right form, then, you can  
input the newpassword to  
enter the menu of LOCK  
setting.  
LOCK OR UNLOCK  
PASSWORD ----  
Direct-digit Choosing  
Button  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the Lock(continued)  
Setting the Lock  
Setting the Lock  
There are SEARCH LOCK,POS LOCK,AV LOCK,  
TIMER LOCK and CHILD LOCK five lock setting,you  
can set it due to your need.  
LOCK  
LOCK OR UNLOCK  
PASSWORD  
1.Press the LOCK button, the  
screen will show as the form  
on the right.  
----  
2.Press the Direct-digit  
Choosing button 0 for four  
times( or inputthe password  
you set), and enter the menu  
of LOCK.  
LOCK OR UNLOCK  
CHANGE PASS.  
SEARCH LOCK OFF  
POS LOCK  
AV LOCK  
TIMER LOCK  
CHILD LOCK  
ALL CLEAR  
ON  
OFF  
ON  
OFF  
OFF  
3.Press CH+/-button, move  
the indicator( )to  
Direct-digit Choosing  
Button  
SEARCH LOCK, thenpress  
VOL+ button to set it ON or  
OFF.  
CH+  
Note:  
1.When theCHANNEL or AV LOCK isset ON,  
the channel orav cannot beused, hence the  
screen will changeinto black andindicate that  
it has beenlocked. The TV set will be inthe  
state of mute.  
VOL-  
VOL+  
MENU  
CH-  
2.When theCHILD LOCK isset ON, ifthe buttons  
on the TV are pressed, it will indicatethat the TV  
set is inthe status ofCHILD LOCK, andthe  
buttons won't work.  
3.When theSEARCH LOCK orthe TIMER LOCK  
is set ON, if you wantto enter theTUNING or  
TIMER menu,you willhave to typethe password.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Game  
This TV set provides you with the SUBMARINE game, after entering the game,  
except the buttons that are appointed in the game( for example, the game button,  
VOL+/-and CH+/-, etc.)and the DC Standy button, the other buttons cannot be  
used.  
Game control buttons and method of playing the game  
Game control buttons  
Fire button  
FIRE  
CH+  
To shoot also use  
the MENU button  
MODE  
Used to turn  
up or down  
VOL-  
VOL+  
MENU  
CH-  
To select the background  
when playing game  
RESTART  
EXIT  
To restartthe game  
To exit game  
Used to turn left or right  
Method of playing the game  
1.Press MENU button until FUNCTION2 appears on  
the screen.Press the CH+/- buttons to select the  
SUBMARINE item. Then press VOL+ button to start the  
game.  
2.On the screen, the submarine figures in yellow is  
operated by you. Press CH+/- and VOL+/- buttons to  
move the submarine up, down, left or right to charge the  
position and avoid the attacks from submarines (in blue,green and purple) of  
enemy. Press MENU or FIRE button on the remote control to fire. You will get a  
mark of 100 when you destroy a enemy submarine or a shell.Specially,when you  
shoot down a red submarine appears on the top row,you will get a mark of 1000!  
Scores will be filed if the submarine of enemy is destroyed.  
3.You can press the RESTART button to restart the  
game when it is GAME OVER or during the process of  
the game.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting Additional Equipments  
You can connect the DVD,VCR and stereo system to theAV output to enjoy a  
higher quality of picture and sound effect.  
Signal flow  
White (Audio leftchannel)  
Red (Cr and audio rightchannel)  
Blue (Cb)  
Green (Y)  
Yellow (Video)  
DVD, VCD or otherunits  
Video output  
Audio output  
Laser DVD withoutput terminal  
DVD, VCD or otherunits  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Before calling service personnel, please check the following chart for a  
possible cause to the trouble you are experiencing.  
Symptom  
Check these things  
TV is not  
turned on  
Be sure the power cord is plugged in.  
The MUTE function may be used.  
Adjust the volume of the TV set.  
Goodpicture,  
nosound  
The contrast, color and tint may be incorrectly adjusted.  
If you change the direction of the TV while the TV is on, the picture  
may suffer from color shading. If so, turn off the TV and allow about  
30 minutes to cool, then turn on the TV again.  
Poor color / tint,  
good sound  
The broadcast signal may be jammed by other electrical sources such  
as cars, motorcycles, electric trains, high tension lines, neon signs, hair  
dryers.  
Spots appear  
on the screen  
The broadcast signal may be jammed by other TV receivers, personal  
computers, andTVgames, aswellasinterferencefromradiostations.  
Lines appear  
on the screen  
Interference may be due to broadcast waves reflected from mountains  
or buildings.  
Check if the direction of the antenna is changed.  
Double images  
or ghosts  
The antenna may be disconnected or falling out.  
Check if the direction of the antenna is changed.  
Snowy picture or  
black screen  
The batteries in the remote control may be exhausted.  
The batteries may be improperly installed.  
Check if there are obstacles between the remote control and the  
remote (infrared ray) receiver.  
Check if there is strong light interference around the remote (infrared)  
receiver.  
Check if the main power is ON.  
Remotecontrol  
doesnotwork  
Thefollowingconditionsarenottroubles  
Clacking noise inside  
the receiver  
It may result from the expansion of the shell caused by a temperature  
change. This will not affect the picture and sound quality.  
Unevencolourina  
certainportionofthe  
screen  
If the picture is too bright, this may occur according to the nature of  
the pictures. Reduce the contrast, it may resume to normal.  
CAUTION  
In case of problems, have your TV serviced by qualified personnel.Never  
attempt to service the set yourself since opening the cabinet may expose  
you to dangerous voltage or other hazards.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
The specifications offered you here are only for reference and, with the improvement  
of the products ,there may be some different between the description and the practicality.  
Specifications  
M o d e l  
Colour system  
Sound system  
Picture tube  
PAL SECAM AV NTSC3.58 NTSC4.43  
BG DK  
25"colour picture tube(the viewable dimension is 59cm)  
Sound output power  
3W  
Power requirements  
Power consumption  
Dimension  
160V-250V  
120W  
50/60Hz  
645 Width x532 Depth x540 Height  
mm  
Remote control  
Owner's manual  
Battery(AA)  
X1  
X2  
X2  
Accessories  
NOTE  
Design and specifications are subject to change without notice.  
The dimension in this manual is a approximation.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Graco High Chair PD202864A User Manual
Graham Field Personal Lift JB02008 User Manual
Grizzly Router H3114 User Manual
Hamilton Beach Blender 1G901 User Manual
Honeywell Barcode Reader 3580 User Manual
Honeywell Barcode Reader VG1200 QS User Manual
Honeywell Home Security System 5894PI User Manual
HP Hewlett Packard Car Video System LA1905WG User Manual
HP Hewlett Packard Computer Drive D3604 90004 User Manual
Hyundai MP3 Player H F2562 User Manual