TFT-LCD COLOUR TELEVISION RECEIVER
OWNER'S MANUAL
This User's Manual is applicable for the following models:
L32A9-AK,L32A9-AK,L32A9+-AK,L32A9-AKF
Please read thismanual carefully
before operating the unit, andkeep
it for future reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENT
BEFORE OPERATING
Warning.................................................................................................................1
Important Safety Instructions................................................................................2
Buttons and interface location............................................................................. 4
Remote controller.................................................................................................6
Remote controller key function.............................................................................7
Effective range of remote controller......................................................................8
External equipment connections..........................................................................9
BASIC OPERATING
Switching on/off the TV set................................................................................ 14
Select input modes ........................................................................................... 15
Searching channel............................................................................................ 16
Watching TV program........................................................................................18
Picture control functions.................................................................................. .21
Sound control functions.....................................................................................23
Time functions....................................................................................................26
Function menu...................................................................................................28
Adjust menu.......................................................................................................29
Lock setup.........................................................................................................32
OTHERS
Others functions................................................................................................35
Stream media broadcast system.......................................................................37
Specifications and functions..............................................................................47
Maintenance......................................................................................................48
Troubleshooting.................................................................................................49
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning
WARNING
WARNING
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO
USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
*To avoid electric hazards, it is strongly suggested that the back cover not be opened, as
there is no any accessory inside the casing.
*If necessary, please contact authorized after-sales services.
*A lighting flash mark in a triangle: Apotentially hazardous situation, which, if not avoided,
could result in serious injury by high voltage.
*An exclamation mark in a triangle: Major part or accessory of which technical specifications
must be followed if it is to be replaced.
Warning:
To avoid fire or electric hazards, never place your television receiver in an area
with heavy moisture. Attention should be paid to avoid accidental scratches or
impacts onto the LCD screen.
Caution:
Please read this manual carefully before using your television and keep this
manual in a good place for future reference.
To achieve the best performance of your television, read this User's Manual
carefully and properly store it for future reference.
Information of screen displays and figures in the User's Manual may vary due
to technical innovations.
Caution:
Unauthorized disassembly of this product is prohibited.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
The product should be tightly fixed to avoid
drop damages and even fire.
To avoid fire hazards, do not use this
product under direct sunlight or closely
to heat sources.
Unplug the power supply and antenna of
the product when there is a rainstorm,
especially
Do not locate the product close to water
or oil, which may cause fire hazards.
Thunderstorm.
Do not use damaged or worn electric plugs
and keep electric cord away from heat sources
to avoid electric shocks or fire hazards.
Do not connect excessive sockets in parallel
or share the same socket by multiple plugs
to avoid fire hazards.
Unauthorized disassembly of the television
is prohibited to avoid electric shocks or fire
hazards. Contact
The product must be placed on a solid and
stable surface to avoid collapse.
authorized after-sales
service if technical
service is needed.
Keep the product away from a transformer
or heat source to avoid fire hazards.
Disconnect the product from power supply
and contact authorized after-sales service
if abnormal sound is heard in the product.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Buttons and interface location
- This is a simplified representation of front panel.
- Here shownmay be somewhatdifferent from your TV.
Front panel Control
TV/AV MENU
POWER
- CH +
- VOL +
Buttons and functions
1
2
3
CH-/+ : program minus and plus , menu options
VOL-/+ : volume decrease and increase , menu reset and entry
TV/AV: all input source select:TV-VIDEO-SIDE VIDEO-S VIDEO-YUV-
USB-VGA-DVI
4
5
6
7
8
MENU: menu display
Power on/off and indicator: in red when standby mode, in blue when display.
POWER : AC power on/off
Remote control signal receive window
Multi-media input
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Buttons and interface location
Rear panel Control
VIDEO Input
Connects the videosignal
from a videodevice.
VIDEO
L
AUDIO Input
connect to hear
stereo sound froman
external device.
AUDIO
R
USB Socket
Power Cord Socket
This TV operates on AC power.
Video/Audio output
DVD/DTV Input
(Component )
Never attempt to operate the Connect a component
The voltage is indicated on
the specifications page.
terminal
Connect ordinary video/audio
or other appliance
audio input terminals.
video/audiodevice to
these jacks.
Antenna Input
TV on DC power
Connect cable or
antenna signals to
the TV, either directly
or through your
cable box.
EXT Subwoofer:
Subwoofer audio output
terminal.
VGA IN
DVI IN
ANT IN
WOOFER
VGA
AUDIO
Pr/Cr
Pb/Cb
Y
L-AUDIO-R
IN
AUDIO
VIDEO L-AUDIO-R
OUT OUT
VIDEO S-VIDEO
IN IN
L-AUDIO-R
IN
POWER
Audio/Video Input
VGA Input
S-Video Input
DVI Input
Connect the monitor
output connector from
a PC to the jack
Connect audio/video or
S-Video out from an
audio/video or S-Video
device to these jacks.
Connect the monitor output
connector from a PC to the
appropriate input port.
Audio input
for linking PC or
Audio input
for linking DVI or
Earphone jack
Earphone Audio output
terminal
other appliance audio
frequency output terminals.
other appliance audio
frequency output terminals.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote controller
Battery loading
1.Slide open the cover of the battery compartment on the back of the remote controller.
2.Load two 7# (AAA)alkaline batteries in the compartment. (plus and minus poles to
respective mark)
3.Replace the cover of the battery compartment.
1
2
3
Precautions
As strong light may interfere the
signals, change your position to
operate the remote controller if
the television cannot be turned
on or off as you expect.
Make sure that two AAAalkaline
batteries are loaded. The batteries must
be of the same type. The batteries must
be located properly. The batteries are not
rechargeable.
Make sure that there is no obstacle
between the remote controller and
television set.
Keep the remote controller away from
heat source or humid area to ensure
effective performance of the remote
controller.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote controller key function
The remote controller cannot be operated unless the batteries are
properly loaded.
1.DISPLAY: Display the current info
2. POWER: Press to turn on the TV from standby
mode. Press again to switch off the TV to standby
mode.
3.STILL: Press it to freeze-frame the current screen
press again to continue playing(never see the still
picture for long time, it would burn-in the screen)
DISPLAY
MUTE
POWER
PIC.SIZE
STILL I/II
4.
/
: Nicam selection in the signal No available)
S-VIDEO DVD/DTV PC/DVI
TV/AV
5. MUTE: Press this button to mute the sound.
Press again to reactivate the sound. Sound also
reactivated if the power is turned off then on or
if press VOL+ button.
Q.VIEW
OK
6. PIC.SIZE: Press to select the display the size of
the screen(never see the 4:3 picture for long time,
it would burn-in the screen)
7. S-VIDEO: Press it to select S terminal input.
8. DVD/DTV: Select YUV input
CH+
VOL-
VOL+
MENU
CH-
9. TV/AV : Press this key to select the sources
10. PC/DVI: Press it to select inputs as follows:
TV-VGA-DVI-TV
SSM
PSM
3
11. OK: Press to confirm
1
2
5
8
0
12. Q.VIEW: Back to the last channel
13. CH+/-: Select the option up and down in menu
or select channels when there is no OSD.
14. MENU: Press to display or exit the menu
15. VOL+/-: Left and right orientation in menu option
or adjust the volume when there is no OSD.
16. PSM: Press to select the picture mode
4
7
6
9
ZOOM/MOVE
-/--
PIP
SWAP SCAN CH.EDIT
17.
: Press to select the sound mode
SSM
18. Number key: Press to select the channel number
19. No available
H.LOCK TIME SKIP
SHUTTLE SLEEP
20. ZOOM/MOVE: PIP moving(No available)
21. PIP: No available
22. SCAN: Scan all preconcerted channel program
23.SWAP: Switch the input signal of the PIP and
the main picture(No available)
USB
RETURN
24. CH.EDIT: Press to display the stored channel
diagram(No available)
ENTER
ZOOM
HELP
25. SLEEP: Can be used to set time to change
the TV into the standby status after a period of
preset time.
26.H.LOCK button
27.SHUTTLE button
28.Time skip button
29. Only for the multi-media ,reference to
the instruction following.
The cover of the multi-media keys
press down to the appropriate position
Note:
The function just takes the remote control for example in this manual
P+/-(CH+/-),V+/-(VOL+/-),MENU,TV/AV and POWER on TV panel are corresponding
with the CH+/-,VOL+/-,MENU,TV/AV and POWER keys.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Effective range of remote controller
Effective range
above
20
20
below
45
45
right
left
front 8m
DISPLAY
MUTE
POWER
PIC.SIZE
S
T
I
L
L
I
/
I
I
TV/AV S-VIDEO DVD/DTV PC/DVI
OK
Q.VIEW
CH+
V
O
L
-
M
E
N
U
V
O
L
+
CH-
PSM
SSM
1
2
3
4
7
5
6
9
8
-/--
0
ZOOM/MOVE
PIP
SWAP SCAN
C
H
.
E
D
I
T
S
H
U
T
T
L
E
S
L
E
E
P
H
.
L
O
C
K
T
I
M
E
.
S
K
IP
USB
R
ETURN
E
N
T
E
R
Z
O
O
M
HELP
Ensure the remote controller is pointed toward the remote controller
windows on the display.
No obstacles should be placed between the remote controller and the
remote controller window.
The effective receiving scope for the signal is 8 meters to the front of
the remote controller windows, and 450 to the left or right side and 200
above or below the control windows.
Use of remote controller:
1. To ensure a normal operation, the remote controller should not be
dropped or damaged in any way .
It should also be kept dry and away from all heat sources.
2. Battery replacement is necessary when the remote controller acts
inconsistently or stops operating the display.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
External Equipment Connections
- Antenna or Cable Service without a Cable Box Connections
- For optimum picture quality, adjust antenna direction if needed.
outdoor
antenna
Antenna input
75 standard
coaxial type
ANT IN
75 coaxial cable
300 twin-lead cable
Plug
Antenna adapter
(additional purchase)
Note
* It is recommended that you'd better use 75 coaxial cable to remove the
disturbance caused by airwave.
* Don't bind antenna cable and electric wire together.
To improve picture quality in a poor signal area, purchase
and install a signal amplifier.
If the antenna needs to be split for two Tv`s, install a 2-
ANT IN
WaySignal Splitter in the connections.
If the antenna is not installed properly, contact your dealer
for assistance.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
External Equipment Connections
DVDsetup
Howtoconnect
1. Connect the DVD video outputs (Y, Pb/Cb,
Pr/Cr) to the COMPONENT (Y, Pb/Cb, Pr/Cr)
INPUT jacks on the TV and connect the DVD
audio outputs to the AUDIO INPUT jacks on
theTV, asshowninthefigure.
2. If your DVD only has an S-Video output
jack, connect this to the S-VIDEO input on
AUDIO
IN
S-VIDEO
IN
L
AUDIO
IN
R
Pr/Cr
Pb/Cb
Y
L
R
VIDEO
IN
the TV and Connect the DVD audio outputs
to the AV IN jacks on the TV, as shown in the
figure.
NOTE: If your DVD player does not have
componentvideooutput, useS-Video.
Howtouse
1. Turn on the DVD player, insert a DVD.
2. Use the S-Video button on the remote
controltoselectS-VIDEOmode.
or
3. Press Play button on external equipment
for program play.
DVD
4. Refer to the DVD player's manual for
operating instructions.
DTVsetup
-To watch digitally broadcast programs,
purchase andconnecta digitalset-top box.
VGA IN
Howtoconnect
Use the TV`s COMPONENT (Y, Pb/Cb,
Pr/Cr) INPUT jacks, VGA or DVI port for
video connections, depending on your set-
top box connections available. Then, make
the correspondingaudio connections.
AUDIO
AUDIO
IN
VGA
Pr/Cr
Pb/Cb
Y
L
R
AUDIO
DVI IN
Howtouse
1. Turn on the digital set-top box. (Refer to
the owner`s manual for the digital set-top
box.)
2. Use PC/DVI on the remote control to
selectPCorDVI(Y, Pb/Cb, Pr/Cr)mode.
or
or
RGB-DTV OUTPUT
R
AUDEO L
DVI-DTV OUTPUT
R
AUDEO
L
R
AUDEO
Y
Pb
Pr
3. Press Play button on external
equipment for program play.
Digital Set-top Box
10
Download from Www.Somanuals.com. All Manuals Search And Download.
External Equipment Connections
PCsetup
Howtoconnect
1. Use the TV`s VGA IN or DVI (Digital Visual Interface) IN port for video connections, depending on
yourPCconnector.
If the graphic card on the PC does not output analog and digital RGB simultaneously, connect only
one of either VGA IN or DVI INPUT to display the PC on the TV.
If the graphic card on the PC does output analog and digital RGB simultaneously, set the TV to either
VGA or DVI; (the other mode is set to Plug and Play automatically by the TV.)
2. Then, make the corresponding audio connection. If using a sound card, adjust the PC sound as
required.
Howtouse
1. Turn on the PC and the TV.
2. Turn on the display by pressing the POWER button on the TV's remote control.
3. Use PC/DVI on the remote control to select PC or DVI source.
4. Check the image on your TV. There may be noise associated with the resolution, vertical pattern,
contrast or brightness in PC mode. If noise is present, change the PC mode to another resolution,
change the refresh rate to another rate or adjust the brightness and contrast on the menu until the
picture is clear. If the refresh rate of the PC graphic card can not be changed, change the PC graphic
cardorconsultthemanufacturerofthePCgraphiccard.
NOTES:
1
2
UseaDVIcable.
Avoid keeping a fixed image on the TV's screen for a long period of time. The fixed image may
become permanently imprinted on the screen.
3
The synchronization input form for Horizontal and Vertical frequencies is separate.
VGA IN
DVI IN
AUDIO
VGA
AUDIO
11
Download from Www.Somanuals.com. All Manuals Search And Download.
External Equipment Connections
Connect Woofer
1. Take the wooferout, and placeit the hindrind. (See picture)
2. Connect cable to the woofer terminal and
LCD TV terminal, and insert the connecting
cable into the terminal slot.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
External Equipment Connections
Connecting Headphones
You can connect a set of headphones to your set if you wish to watch a
TV programme withoutdisturbing the otherpeople in theroom.
Plug a set of headphones into the 3.5mm
mini-jack socket on the rear panel of the set.
ANT IN
Note
Prolonged use of headphones at a high volume
may damage your hearing.
You will not receive sound from the speakers
when you connect headphones to the system.
Power source
TO USE AC POWER SOURCE
Use theAC polarized linecord provided for
operation onAC. Insert theAC cordplug into
a standard polarizedAC outlet.
AC Outlet
Wider Hole
and Blade
NOTES:
Never connect theAC line cord plug toother
than the specifiedvoltage. Use theattached power
cord only.
If the polarizedAC corddoes not fitinto a non-
polarized AC outlet, do notattempt to fileor cut
the blade. Itis the user`sresponsibility to have
an electrician replacethe obsolete outlet.
If you causea static dischargewhen touching
the unit andthe unit failsto function, simply
unplug the unitfrom theAC outlet andplug it
back in. The unit shouldreturn to normaloperation.
Polarized ACCord Plug.
Polarized AC Cord Plug
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching ON/OFF the TV set
In the manual, the OSD (on screen display) may be different from your TV`s because it
is just an example to help you with the TV operation.
Power ON/OFF
Switching ON/OFF the TV set
1 Please press down the power switch to
switch on AC power supply and the power
indicator will light .
2 If the indicator is lighting in red, press
POWER button on the remote control again.
Indicator
TV/AV MENU
- CH +
- VOL +
POWER
3 If you want to exchange to standing by
status, please press down POWER button on
the remote controller.
Remote receiving
window
4 If you want to fully switch off the power
supply for the TV set, please press down the
power switch button on the TV set.
Choose the Menu Language
When you start using your set for the first time,
you must select the language which will be
used for displayingmenus and indications.
1 Press MENU and VOL+/-button to select
the FUN. Menu.
2 Press CH+/-button to selectLanguage.
3 Select a particular language by pressing
VOL+/- button repeatedly.
You can choose oneof two languages.
(Chinese or English)
4 When you are satisfied with your choice,
press MENU button to return to normal
viewing.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Select input modes
Choose the input source
If you hope to enjoy the picture from the external
input source, before to select the source, you need
to connect thedevices, otherwise, whenyou select
the source, the none or no signal will appears on the
screen.
S-VIDEO DVD/DTV PC/DVI
TV/AV
Source
Press TV/AV button on remote
controller, the menu appears
on the screen. Then press
CH+/- to select the TV item,
and press VOL+/- to ensure it.
TV: the input source from ANT IN terminal output.
AV1: the input source from AV1 terminal output.
AV2: the input source from AV2 terminal output.
YPbPr/YCbCr: the input source from YPbPr terminal
output.
VGA: the input source from VGA IN terminal
output.
DVI: the input source from DVI IN terminal
output.
USB: the input source from USB socket terminal
output.
Before watching TV program, you need to ensure
your TV in TV mode.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Searching Channel
This TV set has three methods to set channels, which are respectively full automatic,
manual search fine tune.
In this section, how to use the remote control to set channel is explained. You can also use
buttons on the TV set to set channel.
Full automatic search mode
Automatic search
1
Press the MENU button and
Color Sys.
Sound Sys.
Manual Search
Store Program
Fine Tune
Auto
D/K
VOL+/- button, till tuning menu
shown on the right display on
the screen.
---
Q.VIEW
OK
49.75MHz
Off
Skip
Auto Search
Prog. Switch
CH+
A
B
C
VOL-
VOL+
MENU
Note : the tuning menu will be
only operated in normal TV mode.
CH-
SSM
PSM
2 Press the CH+/- buttons to
select "Auto Search" item.
VHF-L 188.16
3 Press the VOL+ button to
ensure automatic search
function work.
After the search has finished, all channels now playing
program will be automatically preset in order.
4 Press MENU button to stop automatic search function.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Searching Channel
Manual search
Manual search
1
Press the CH+/- buttons or the
3
1
4
7
2
3
6
9
AUTO
D/K
PROGRAM NUMBER 0-9
button to choose desired
channels regard channel 1 as
example
5
8
0
2
Press the MENU button and
Color Sys.
Sound Sys.
Manual Search
Store Program
Fine Tune
Auto
D/K
VOL+/- button, till the TUN.
menu shown on the right display
on the screen.
---
49.75MHz
Off
Skip
Q.VIEW
OK
Auto Search
Prog. Switch
CH+
A
B
C
3 Press the CH+/- buttons to
select " Manual Search" item.
VOL-
VOL+
MENU
VHF-L 188.16
CH-
4 Press the VOL-/+ buttons to
start searching.
SSM
PSM
When searching successfully for the channel, the Manual search
stopping automatically, at this time, press CH- button to select
Store Program, then press VOL+/- to set the store.
Fine tune
If the picture and/or sound are poor, try using the FINE
TUNE feature. Do not use this feature unless reception
is poor.
1
Repeat step 1-2, then press CH+/- buttons to select
" Fine Tune" item.
Color Sys.
Sound Sys.
Manual Search
Store Program
Fine Tune
Auto
D/K
2 Press VOL-/+ buttons repeatedly
to carry out fine tune, till the best
picture and sound are obtained,
then loosen the button.
---
49.75MHz
Off
Skip
Auto Search
Prog. Switch
A
B
C
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV Program
You can watch TV program in a presetting channel.
Watching TV program
To select the TV mode
S-VIDEO DVD/DTV PC/DVI
TV/AV
Before watching TV program, you may ensure your TV in
TV mode.
Press TV/AV button to select TV mode.
How to select the desired program
1
4
7
2
3
6
9
1 Using "Program number" buttons.
Directly enter the channel number with the numeric keypad
on the remote control.
5
8
0
If to select channel numbers of double-digit or three-figure ,
press continuously the numeric buttons in three second.
2 Using the CH+/- buttons.
Press the CH+ button to select a channel number in number
increasing direction.
Press the CH- button to select a channel number in number
decreasing direction.
Q.VIEW
OK
How to select the desired sound
CH+
Press the VOL-/+ buttons on the remote or the front of the
TV set to adjust the volume level. The range is 0~100.
When the volume buttons are pressed the volume level is
displayed automatically on the TV screen.
VOL-
VOL+
MENU
CH-
SSM
PSM
Volume
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV Program continued
Watching TV program
If the color of some channel is abnormal
Usually this should be set in the
Color Sys.
Auto
D/K
auto position. However if the color
Sound Sys.
Manual Search
displayed on the screen are incorrect,
Q.VIEW
OK
Store Program
---
Fine Tune
49.75MHz
Off
you can manually select the correct
Skip
color system.
CH+
Auto Search
Prog. Switch
Press the menu and VOL+/- button,
till the picture menu shown on the
right will display on the screen.
A
B
C
VOL-
VOL+
MENU
CH-
If picture color is abnormal
Press the CH+/- buttons to select "Color Sys.", then press the
VOL-/+ buttons to select the correct color system. In general,
you can set it as "AUTO".
SSM
PSM
If sound is abnormal
Press the CH+/- buttons to select "Sound Sys.", then press
the VOL-/+ buttons to select the correct sound system. In
general, you can set it as "D/K".
Skip
After the programs are presetting, you can skip some
programs so that to select your favorite channels only.
Q.VIEW
OK
CH+
1. Press CH+/- button or Direct-digit
choosing button to select a channel
Color Sys.
Sound Sys.
Manual Search
Store Program
Fine Tune
Auto
D/K
directly (take channel 18 for
example).
VOL-
VOL+
MENU
---
49.75MHz
Off
Skip
2.Press MENU CH+/-and VOL+/-
button, till the TUN. menu shown
on the right will display on the
screen.
CH-
Auto Search
Prog. Switch
SSM
PSM
A
B
C
3. press VOL-/+button to setSkip On.
4. press MENU to exit.
If you want to recover the skipped channel
1. Use Direct-digitChoosing button toselect the number
of the channel to be recovered.
2. Do theabove steps again.
3. Press VOL+/-button to setSkip OFF.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV Program continued
Watching TV program
Prog. Switch
1.Press MENU CH+/-and
Color Sys.
Sound Sys.
Manual Search
Store Program
Fine Tune
Auto
VOL+/- button, tillthe TUN.
menu shown onthe right will
display on thescreen.
D/K
---
Q.VIEW
OK
49.75MHz
Off
Skip
Auto Search
Prog. Switch
2. Press CH-/+button to select
Prog.Switch.
CH+
A
B
C
VOL-
VOL+
MENU
3. Press VOL+ toenter the
submenu, and pressthe digital
button to setthe desired
channel number,
CH-
Current Prog.
To Prog.
000
001
SSM
PSM
Switch
Press CH+ buttonto To Prog.
Press the digitalbutton to set
the exchange channelnumber,
press CH+ buttonto Switch,
then press VOL+button to
ensure.
A
B
C
4. press MENUexit.
Quick program view
This function enables quick swap to the last watched program.
1
Suppose the channel number you
18
AUTO
D/K
used just now is 8 and the channel
number you are using is 18 (as shown
inthefigure).
Q.VIEW
OK
CH+
8
AUTO
D/K
2
If you want to return to the last
watched program channel 8, you can
simplypress theQ.Viewbutton.
VOL-
VOL+
MENU
CH-
3
If you want to return to channel 18,
18
AUTO
D/K
press the button again. Use this
function, you can easily change
between the channel you are using
and the channel you used last time.
SSM
PSM
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture Control Functions
Multiple picture modes
How to select picture modes
You can quickly select the desired picture mode from
three preset modes and one customized mode.
Q.VIEW
OK
Press the PSM button to select the
PIC. Mode
CH+
desired picture quality. Four kinds
of picture modes (i.e., "Normal",
"Soft", "Personal", "Bright" )
can be selected in turn.
Bright
Normal
Soft
VOL-
VOL+
MENU
CH-
Personal
The 4 modes are
SSM
PSM
Picture mode
Picture quality
A spare setting that can be adjusted to
personal tastes
Personal
Designed for rooms that have good all round
lighting
Normal
Soft
Designed for nighttime low lightviewing
Designed for rooms with high ambient
lighting such as daytime sport;
Bright
How to customize your own picture status
1
Press the MENU button and
VOL+/VOL- button , till the
PIC menu shown on the right
display on the screen.
Mode
Personal
50
50
50
Contrast
Brightness
Chroma
Hue
0
50
Q.VIEW
OK
Sharpness
BackLight
DNR
50
Auto
CH+
A
B
C
2 Press the CH+/- buttons to
select the item to be adjusted,
then press the VOL-/+ buttons
to obtain the desired effect.
VOL-
VOL+
MENU
Brightness
CH-
I T E M
Press VOL-
Press VOL+
SSM
PSM
Brightness
Contrast
Dark
Bright
Weak
Soft
Strong
Sharp
Deep
Sharpness
Chroma
Shallow
More purple
Green
More green
Red
Hue(only in NTSC mode)
BackLight
NOTE these items are adjustable only under the personal setting.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture Control Functions
Multiple picture modes
DNR( Digital Noise Reduction)
Automatically filters outand reduces theimage
noise and improvespicture quality whenreceiving
weak video signals.
Q.VIEW
OK
1
After calling up the
Picture menu, press
CH+/- button to select
"DNR" item.
CH+
Mode
Personal
50
50
50
Contrast
Brightness
Chroma
Hue
VOL-
VOL+
MENU
0
50
CH-
Sharpness
BackLight
DNR
2
Press VOL+ to enter
the list. Select Auto,
Off, Weak, Medium
or Strong according
to the image noise.
50
SSM
PSM
Auto
A
B
C
3 Press MENU return
to the picture menu.
In other modes
TV/AV1/AV2/USB
YPbPr/YCbCr
Mode
Personal
Mode
Personal
50
50
50
Contrast
Brightness
Chroma
Hue
50
50
50
Contrast
Brightness
Chroma
Hue
0
50
0
50
Sharpness
BackLight
DNR
Sharpness
BackLight
DNR
50
50
Auto
Auto
A
B
C
A
B
C
Only N system.
VGA/DVI
No adjustable
Mode
Personal
50
50
50
Contrast
Brightness
Chroma
Hue
No adjustable
0
50
Sharpness
BackLight
DNR
50
Auto
A
B
C
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound Control Functions
Multiple sound modes
How to choose sound mode
Q.VIEW
OK
Press the SSM button to select the
desired sound quality. Four kinds
of sound modes (i.e., Standard
SOU. Mode
Music
CH+
,
VOL-
VOL+
MENU
Standard
Theater
Theater
,
Personal ,and
CH-
Music ) can be selected in turn.
Personal
SSM
PSM
Sound mode
Personal
Standard
Music
Sound quality
A spare setting that can be adjusted to
personal tastes
normal sound with moderate bass and treble
setting
Designed to reduce the bass and treble which
enhances the voice for news programs
Enables extra bass and treble to enhance the
movie experience;
Theater
How to customize your own sound quality
1 Press MENU button and
Q.VIEW
OK
Volume
50
0
VOL+/- button , till the SOU.
Balance
menu shown on the right
SOU. Mode
Personal
50
CH+
Treble
display on the screen.
Bass
70
Surround
AVC
On
VOL-
VOL+
MENU
Off
Woofer
Off
2 Press CH+/- buttons to
A
B
C
CH-
select the item to be
adjusted, then press VOL-/+
buttons to obtain the desired
effect.
SSM
PSM
Treble Increases or decreases the treble.
Bass Increases or decreases the bass.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound Control Functions
(Continue)
Balance
This will adjustthe output ofthe right andleft speakers to
obtain the beststereo reproduction foryour listening
position.
The intermediate value is 0. When indication value of Balance
increases toward+50, sound of the right and left speaker
becomes stronger and weaker, respectively. When indication
value of Balance decreases toward -50, sound of the right
and left speaker becomes weaker and stronger.
Q.VIEW
OK
CH+
VOL-
VOL+
MENU
Press CH+/- button to Select Balance,
Press VOL+ button to increase the audio output in the right
speaker;
CH-
SSM
PSM
press VOL- buttonto increase the audio output in the left
speaker.
surround sound
The surround sound feature expands the audio listening
field wider anddeeper to create exceptional sound
quality from the TV`s speakers.
Press CH+/- button to Select Surround,
press VOL+/- button to set Surround as Off or On
AVC( Auto volume contol)
Each broadcasting stationhas its ownsignal conditions,
and so itis not easyfor you toadjust the volumeevery time
the channel ischanged. This featurelets you automatically
adjust the volumeof the desiredchannel and reducesthe
volume differences between channels andprograms,
providing a moreconstant overall level. This will also
reduce the dynamicsof sound.
Press CH+/- button to Select AVC,
press VOL+/- button to set Surround as Off or On
Woofer sound
Woofer is a speaker that complements front speaker`s
reproduction capability oflow-pitched sound.
Press CH+/- button to Select Woofer,
press VOL+/- button to set Surround as Off or On
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound Control Functions
Mute
How to eliminate sound
When you need to pay attention to surrounded sounds,
or there is a telephone calling you or there are some
guests visiting you, the sound elimination (mute)
function is very convenient.
MUTE
1 Press the MUTE button on
the remote control and "MUTE"
type face will display on the
lower part of the screen. At this
Mute
time, the sound of the TV set
is turned off.
2 If you want to recover the
sound, press the MUTE
button again or directly press
the VOL-/+ buttons.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Time Functions
Clock setting and timer on/off functions
Clock setting
The clock will only work if the TV set is turned on or
in standby. When the set is disconnect from the
power supply or is turned off by the main power on
the rear panel, the clock loses power and will need
to be reset when the power is reconnected.
Q.VIEW
OK
CH+
1 Press MENU button and VOL+/-
button, and the TIME menu display
on the Screen.
Clock
--:--
--:--
--:--
000
--:--
000
VOL-
VOL+
MENU
Off Time
On Time
On Prog
Remind Time
Remind Prog.
CH-
2
Press CH+/- buttons select
"Clock",press VOL -/+ buttons to
select hour or minute position, then
press the digital buttons to set the
value of hour or minute;
SSM
PSM
A
B
C
On/off timer
Using on/off timer function, the TV set can automatically
turn on to a preset program or shut down in a preset time.
1
Press CH+/- buttons to select
Clock
--:--
--:--
--:--
000
--:--
"On time", press VOL-/+buttons
to select hour or minute position;
then press the digital buttons to
set the value of hours or
minutes.
Off Time
On Time
On Prog
Remind Time
Remind Prog. 000
A
B
C
2
Press CH+/- buttons to select
NOTE:
"On prog", then press the digital
buttons to select your desired
channel.
1.If Clock option is setting,
the time you set for OffTimer
/On Timer will be a point
of time. Otherwise, if Clock
is not set, the time you set for
Off Time/OnTime will be a
period of time.
3
Repeat step 1-2 to set Off time
.
2.Sleep Off/ Off Time can not
be set at simultaneously.
If both of the two are set, the
later setup will be operation.
Indication will appear on the screen 1 minute prior to
expiry of set time.
Suppose Timer Off is set, and indication is as follows:
Off Time
When the aboveindication appears onthe screen,
set time maybe changed ifVOL+/- button ispressed.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Time Functions
Remind Time and Remind Program setting
How to use the remind time and program
Program remind timer, that displays an on-screen
reminder prompt, when a program on a different
channel is dueto start.
Q.VIEW
OK
CH+
1 Press MENU and VOL+/-
button to call up the TIME
menuonthescreen.
VOL-
VOL+
Clock
--:--
--:--
--:--
000
--:--
MENU
Off Time
On Time
On Prog.
Remind Time
CH-
Remind Prog. 000
SSM
PSM
2 Press CH+/- buttons to
A
B
C
select
"Remind Time",
then press VOL -/+ buttons
to select hour or minute
position; then press the
digital to set the value of
hour or minute.(take 19:30
asanexample)
Clock
--:--
--:--
--:--
000
--:--
Off Time
On Time
On Prog.
Remind Time
Remind Prog. 000
3 Press CH+/- buttons to
move the cursor to "Remind
Prog.", then press the digital
buttons to set the desired
channel.
A
B
C
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Function menu
It is possible to select language, OSD transparency, menu timeout, calendar,
3A optimize, time skip.
Function menu operation
1.Press MENU andVOL+/-
Language
English
15seconds
Translucent
Off
button to enter the FUN.
Menu.
Menu Timeout
Menu Background
BlueScreen
Calendar
2. Press CH+/- to select
desired item.
3A Optimize
Time Skip
Off
0Min
3. Press VOL+/- button to
adjust the values level.
A
B
C
4. Press menu to exit.
Q.VIEW
OK
No adjustable in YPbPr/YCbCr/
VGA/DVI/USB modes
CH+
No adjustable in AV/AV2/YPbPr/
YCbCr/VGA/DVI/USB modes
Menu Timeout
Repeat step 2and 3 toset the menuout time.
Each Press ofVOL+/- button repeatedlyto select thenumber
of preset minutes, the time willbe set insequence: 5seconds,
10seconds, 15seconds, 20seconds, 25seconds, 30seconds,
40seconds.
VOL-
VOL+
MENU
CH-
SSM
PSM
Menu Background
Repeat step 2and 3 toselect semi transparencyand opaque
background of OSD.
BlueScreen
Repeat step 2and 3 toselect BlueScreen.
If you selectON, when nosignal, the backgroundis blue; ifyou
select OFF, when nosignal, the backgroundis dark.
3A Optimize
Repeat step 2and 3 toset the 3A optimize as on or off.
The 3Aoptimize tracks picturecontrast and colorto improve
the quality ofpicture in termsof brightness andsharpness.
Calendar
Repeat step 2to select theCalendar, press
VOL+ button tosearch
the desired yearor
month.
Press CH+/CH- button
to adjust thedesired
year or month.
Time Skip
Repeat step 2 to select
the Time Skip, Each Press of VOL+/- buttonrepeatedly to
elect the number of preset minutes, the time will be set in
sequence: 0seconds, 1seconds, 2seconds, 3seconds,
4seconds, 5seconds, 6seconds,7seconds, 8seconds,
9seconds,10seconds.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjust menu
1.Press MENU and VOL+/- button to enter the
ADJ. menu.
Display Mode
Adjust
Normal
2. Press CH+/- to select
desired item.
RGB
Q.VIEW
OK
Default
3. Press VOL+/- button to
adjust the values level.
Auto Sync.
Color Temperature Normal
CH+
4. Press menu to exit.
Display Mode
Black Stretch
On
A
B
C
VOL-
VOL+
MENU
CH-
Repeat step 2 and 3 to set the Display Mode.
SSM
PSM
Normal
Choose Normal when you wantto view thepicture without
any alteration. However, the topand bottom portionsof the
picture will becropped.
Wide Screen
Choose Wide Screen when you wantto adjust thepicture
horizontally, in a linearproportion to fillthe entire screen.
4:3 Mode
Choose 4:3 when you wantto view apicture with anoriginal
4:3 aspect ratio, with black barsappearing at boththe
left and rightsides.
You can also press PIC.SIZE button on remote controller
to select the desired picture ratio.
Color temperature
Repeat step 2 and 3 to set the Color temperature.
There are four kinds of modes (i.e., "Normal","Warm" ,
"Green","Cold")can be selected in turn.
This will increaseor decrease Warm (red) and Cool
(blue) colors to suit personal preferences. Select Cool
to give the white colors a blue tint, Normal to give the
white colors a neutral tint, Warm to give the white
colors a red tint. Green to give the white colors a
green tint.
Black Stretch
Black Stretch-(Automatically Increasesthe Contrast
Rage)
Repeat step 2 and 3 to set the Black Stretch.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjust menu
In VGA and DVI input mode, H-Position and V-Position can be adjusted to
eliminate transverse line interference and decentered picture.
PC setting
PC setting
Press PV/DVI button to select PC or DVI mode.
S-VIDEO DVD/DTV PC/DVI
TV/AV
1 Press MENU button and VOL+/VOL- button , till the ADJ.
Menu display on the screen.
2 Press CH+/- buttons to select the item to be adjusted, then
press VOL+/- buttons to adjust.
Display Mode
Adjust
Normal
RGB
Only be adjustable
in the VGA/DVImode.
Q.VIEW
OK
Default
Auto Sync.
Color Temperature Normal
CH+
Black Stretch
On
A
B
C
VOL-
VOL+
MENU
CH-
Adjust
This will adjust the picture of H-positon, V-positon, H-size, V-size
and Fine Tune.
SSM
PSM
Press CH+/- buttons to select
0
0
0
0
H Size
Adjust, then press VOL-/+
H Position
V Size
buttons to enter the sub menu.
V Position
Fine Tune
0
A
B
C
Note:
1. As adjusting H position or V
position parameter, It is
natural that the picture will
have faintness once in a while
if the range is more, then to
adjust contrarily to normal
position.
2. H-position,V-position,Auto
Adjust are not available in TV
mode.
3. Auto Adjust is not available
inAVandS-VIDEOmode.
H Size Horizontal size of picture can be adjusted in this item.
H Position: Horizontal position of picture can be adjusted in this
item.
V Size: Vertical size of picture can be adjusted in this item.
V Position: Vertical position of picture can be adjusted in this
item.
Fine Tune: Adjust phase to the best effect suiting for VGAsignal.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjust menu
In VGA and DVI input mode, H-Position and V-Position can be adjusted to eliminate
transverse line interference.
(Continue)
PC setting
1 Press CH+/- buttons to
select RGB, then press VOL-
/+ buttons to enter the sub
menu.
Display Mode
Adjust
Normal
Q.VIEW
OK
RGB
Default
CH+
Auto Sync.
Color Temperature Normal
VOL-
VOL+
MENU
Black Stretch
On
2 Press CH+/- buttons to
select the desired item, press
VOL+/- button to adjust.
A
B
C
CH-
SSM
PSM
0
0
0
Red
RGB is opted for adjustment
of the numerical value of red,
green and blue in VGA/DVI
mode.
Green
Blue
A
B
C
Default
This is opted for adjustment of parameters to delivery setup
in VGA mode.(Afterthe operation, complete will be on the
right of the operation)
Repeat step 1and 2 toset the Default.
Auto Sync
This is opted for adjustment of picture location requency and
phase parameters in VGAmode.(After the operation, complete
will be on the right of the operation)
NOTE
As the frequency of display
differ in PC device you may
select the appropriate
In VGA , if no signal input, the Auto Syncwill be no adjustable.
Repeat step 1and 2 toset the Auto Sync.
frequency to obtain desired
effect. If the signal of receive
is excess, the picture can be
not displayed or wrong on
the screen.
Note
Recommendatory frequency as follow:
H-frequency V-frequency
Sequence
frequency
Remark
KHz
Hz
60
60
60
31.5
DOS
VESA
VESA
37.88
48.36
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Lock setup
How to use the password function
Press H.LOCK button, Password will appearon the screen.
The television has the
function of security
default lock. Password
needs to be entered
when the program
lock mode is to be
set.
The initial password of thetelevision is 0000and security
default password is9443. then enterLock Set menu.(as
follow)
Lock Set
H.LOCK TIME.SKIP
SHUTTLE SLEEP
Password
Off
Off
1
Tuning Lock
Preset Prog.
Prog. Num
Source Lock
Child Lock
Max Volume
UnLock
Off
100
Note: If thepassword is notcorrectly entered, youwill be
required to reenterthe password andthe cursor willstay at
the first place.
1
4
7
2
3
6
9
5
8
0
Press EXIT to cancel thewindow.
To set new Password
The password canbe changed.
After entering the Lock set menu, Press CH+/- to select
password, Press vol+/-, the screen willdisplay the follow.
Old Pw. ----
If correct password is entered, the screen will display the
follow.
New Pw. ----
Press digital button to set the new desired password, and
the screen willdisplay the follow.
Confirm ----
Note:
If Clear Lockis activated,
the password setup
cannot be changed.
If the desired password is entered correctly twice, the old
password will be changed. If the desired password is not
correctly entered twice, the screen will display New ----,
then you haveto reenter thepassword.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Lock setup
Tuning Lock
Press CH+/- to select Tuner Lock and VOL+/- to set On/
Off. (To set On, some operation such as search will be
not available. Whenenter theTUN. menu,Tuner Lockwill be on
the screen, andthe time willbe the samewith the mainmenu if
no operation. If you want to operate TUN. menu, you need to
enter the Lockmenu to setTuner LockOff oroperate Clear Lock.
H.LOCK TIME.SKIP
SHUTTLE SLEEP
Preset Prog.
Prog Set is opted for setting up start channel. Press CH+/-
button to select Prog Set. PressVOL /- button, sources can be
swapped in TV/AV1/SAV1/AV2/YPbPr/VGA/DVI/USB/Off mode.
After setup, the set mode will be entered if the television is
switched off and on again. To set Off, the television will memory
the off-channel.
Q.VIEW
OK
CH+
VOL-
VOL+
MENU
CH-
Prog. Num
Prog Num is opted for setting up preset channel. Press CH+/-
button to select Prog Num. Press VOL /- button, to select
channel number.(The item is not available except TV signal.)
SSM
PSM
Source Lock
Source Lock isopted to hinderexternal input modes, such as
AV, Scart andVGA. Press CH+/- button to selectthe option,
and press VOL+/- button to displaySource Lock menuas
follows:
Source Lock
Off
Off
AV1
SAV1
AV2
Off
Off
YPbPr/YCbCr
VGA
Off
Off
Off
DVI
USB
Press CH+/- button to select desired option. Press VOL+/-
button to set up the mode of Source Lock. If some Source
Lock is set ON, the mode will be entered and the screen will
display blue background with the mute mode activated and
Lock. In lock on mode, when screen is blank, icon Lock will
be always displayed on the screen. If lock mode is to be
verified, enter Source Lock submenu and set relative mode
off, or select Clear Lock in the Lock Set Menu.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Lock setup
Child Lock
Press CH+/- button to select Child Lock.
Press VOL+/- button to set On or Off mode. If lock on
mode is set, Child Lock is in activated automatically.
In such case, if Child Lock button (button on the
television) is pressed, the screen will display Child
Lock, which can be erased by press of EXIT button.
5 seconds later after the latest press, the screen
display will disappear automatically. The Child Lock
mode can be resumed by entering Lock Set menu,
set Child Lock ON or OFF.
Q.VIEW
OK
CH+
VOL-
VOL+
MENU
CH-
SSM
PSM
Max Volume
Press CH+/- button to select Max Volume. Press
VOL+/- button for adjustment between 0 100. If a
certain value is set, when volume is being adjusted,
the sound value can not exceed maximum volume
value. If current volume is over Max Volume, when
Lock Set menu is set, current volume will become
set maximum volume. If current volume is below
maximum volume, customer set volume will stay
unchanged.
UnLock
Press CH+/- button to select Unlock mode. Press
VOL+/- button to unlock all set modes, setting all
lock options to off, and the maximum volume returns
to 100.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Others functions
Nicam Sleep display functions
NICAM
Press the I/II button will result in fast swap of NICAM
function of current program.
Display function
DISPLAY
Press the DISPLAY button, then
the channel number and system
will be displayed on the screen.
Press the DISPLAY button again,
it is disappear.
3
AUTO
B/G
Sleep
SLEEP
The TV set will switch automatically to standby at the
preset time with the SLEEP time on. You may set the
sleep time.
each press ofSLEEP button repeatedly onthe remote
control to selectthe number ofpreset minutes, thetimer will
be set insequence: (0Min, 5Min, 15Min, 30Min,60Min,
90Min, 120Min).
After the sleeptime is programmed, the display willappear
briefly every tenminutes to remindyou that thesleep timer
is operating.
To confirm the sleeptimer setting, pressSLEEP and the
remaining time willbe displayed fora few seconds.
To cancel the sleeptimer, pressSLEEP repeatedly until the
display turns to0 Min.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Others functions
Scan Shuttle functions
Scan
1 If you want to select a desirable program, you may
SCAN
scan all the TV programs in memory. You can simply
press Scan button to do this. Press scan button once,
there are nice pictures on the screen, press Scan button
again, there are sixteen pictures on the screen to scan.
2 If you want to stop the function during auto tunning,
simply press Scan button again.
Shuttle function
Shuttle function enables quick swap to setting program.
SHUTTLE
Press Shuttle button about 3
second, and the display store
on the screen, at the time, you
may operate other, then if you
Store
scan over program, you may
press again shuttle button to
return to the setting program.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Stream media broadcast system
Stream media play prepare
1. Supporting equipment
are used for internal files. This
1.Equipment supporting Mass and
Storage agreements include USB,
mobile hard disk, card reader, some
MP3 anddigital camera.
2. Equipment supporting PTP
agreement includes some digital
camera.
television can only play some AVI
and MPG files of this format. Those
files with suffix of dat are not movie
files, but data files used by
computers, and cannot be played for
movies.
5.External card reader supports
most digital cards available in the
market. Readable digital cards are
classified according to the property
of card readers and can be
connected to mobile hard disks
(working voltage 5.0V, working
current not over500mA).
6. Sometime thetelevision operation
may be halted due to excessive rate
of information code errors. In such
case, restartthe system.As thereare
many nonstandard USB mobile
devices in the market. If this kind of
USB mobile devices are used in the
stream media play system, the
problem of identification failure
might occur. The same problem may
also happen with computers, not
televisions.
7.It is suggested that the external
devices with USB2.0 interface be
used to improve velocity of
information readingand continuityof
information play.
2. 1 Supporting media:
picture, music, MPEG4, MPEG2
and MPEG1;
Supporting fileformat
*.Avi, *.DIVX,*.MPEG,*.DAT, *.MP3,
*.WHA, *.JPG and *.JPEG. Due to
particularity of file code and file mode,
It is possible that some files cannot be
read.
2 If Pic & Music mode is activated,
relative media file format will include
JPEG and MP3 files. After Picture is
selected, MP3 files set for play will
open both music and picture files for
sync play performance. As some files
must be read while music is being
played, thespeed ofpicture operation
response mightbe affected.
3.Before starting operation, verify
USB storage device is of FAT32 and
FAT filesystem format. At present, this
television does not support NTFS and
the file systemsof other format.
4.Many moviefiles usesuffix ofAVI and
MPG. However, manykinds offormat
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Stream media broadcast system
Stream media system setup
Note: Memory cards or USB devices are not
supplied with this TV.
USB setup
1 Insert USB in the card slots at the left side the TV.
2 Insert it to be clicked in.
3 Press USB button on the remote controller to enter
the stream media system.
AAA Multimedia Player
USB1
USB2
File Copy
SETUP
Remove USB1
Remove USB2
CARD setup
This TV is compatible with the card of SD/MMC/CF/MS/SM
format.
Press ENTER key to play this devices
How to use
1
Jack of cardInstructions
Jack of SM card
Note
1.Please note chooses uses
the digital memory card with
you corresponds the receptacle
2.Card reader in 1 cannot
simultaneously insert two kind
of cards in the graphical
Jacks of SD MMC MS card
Jack 1
Jack 2
representation position
Jack of CFcard
2
Insert the card as right direction. As following Card in common use
5
SD card
1
CF card
3
MS card
2
MMC card
4
SM card
jack
jack
jack
jack
jack
MULTIMEDIA
CARD
COMPACT FLASH
DIGITAL MEMORY CARD
128
SD
128MB
ID 128MB
128
Note:
1.the card insertion time, after the flows media system starts 2s , insert the card
to numerical code card reader , do not bring card to start flow media system.
2. After card insertion, indicator light will shines, and enters glitters condition,
after period of time , indicator light enters constant bright condition, indicates
already distinguishes finished, this time carries on play operation and so on .
3, In the market ,the digital card type are very many, please uses standard
product of the standard factory , meets reads takes difficult or reads speed
limits, please replaces the digital card.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Stream media broadcast system
Removing USB device
AAA Multimedia Player
1 Press up or down to select Remove USB,
and press ENTER button to ensure it.
2 press RETURN button to exit menu.
3 Remove the memory card/USB device.
4 If to remove the card device, pressRETURN
button to return to the main menu, and
remove the card.
USB1
USB2
File Copy
SETUP
Remove USB1
Remove USB2
Press ENTER key to remove USB1 devices
Card data protection
- Do not remove the card/USB device when the content is being read or when
browsing. Such action may damage the memory card/USB device.
- Do not touch the terminals on the back of the card.
- Always insert a card in the correct direction. Failure to do so may result in
damage to thecard and theunit.
- Do notsubject the cardto excessive pressureor strong impacts.
- Malfunctions of the unit or card may result in data loss or damage to the card.
- Haier shall not accept any liability for damage or loss of stored data.
Warning:
Memory cards can be swallowed
by young children. Do not allow
children to handlememory cards.
Please remove thememory card
immediately after use.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Stream media broadcast system
To start the media play
1. Press USB button to enter media play system.
2. Press up or down button
to select the desired option.
AAA Multimedia Player
USB1
USB2
3. Press ENTER button to
File Copy
SETUP
enter desired option.
Remove USB1
Remove USB2
4. Press RETURN to return the
Press ENTER key to play this devices
previous menu.
USB
5. If to exit USB system, you need to return to the main
menu to protection card data.
RETURN
HELP
ENTER
ZOOM
Note: If there are no operation two minute later, the
TV will enter the saver automatically, at the time, press
any button of USB system to exit the saver menu.
To operate the menu
1. Press up or down to select the item with up or down.
2
Press
with left or right.
Press ENTER button to ensure the desired option to
enter the submenu to resume the speed of standard.
or
to select the desired item of submenu
3
4. Press
or
button to operate play quickly or slowly.
5.Press pause button to make the program stop and press
again to resume it.
6.Press ZOOM button to make zoom, and press
or
or
7
/
button to enjoy the detail.
Press HELP button to call up or exit the OSD information.
And press HELP button to call up or exit the OSD during
operating file copy.
8
press RETURN button to return to previous menu and
stop play, press RETURN button repeatedly to return to main
menu.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Stream media broadcast system
To select stream media broadcast system
1.Press up or down button
AAA Multimedia Player
to select "Card"or "USB".
(The device be inserted
USB1
and identified).
USB2
File Copy
2. Press ENTER button to
SETUP
enter adjusted option.
Remove USB1
Remove USB2
USB
Press ENTER key to play this devices
To play picture
RETURN
AAA Multimedia Player
ENTER
ZOOM
HELP
1. Press up or down
button to select Picture item.
2. Press ENTER button to
enter the menu of play.
3. Press again up or down
button to select desired
enjoy picture, and then
press ENTER button to enter
the play menu.
Picture
Movie
Music
Music and Pic
AAA Multimedia Player
F-007 .JPG
F-008 .JPG
F-009 .JPG
F-010 .JPG
F-011 .JPG
F-012 .JPG
4. On screen display, Press
or to select the speed
of play.(Normal, Slow, Fast).
5. Press
or
button to
swap the picture of next and
previous. Press RETURN button
to return.
Play
JPEG
0016.JPG
Slideshow speed Slow
IMAGE
To enjoy the picture detail
1. After selecting the picture to play, press ZOOM to
select desired zoom.
2. Press HELP button to exit the display, and then
Note:
press or
or
or
the play file menu are
different with your USB
devices.
to move and enjoy the picture detail.
To make the picture overturn
Each press of
button to make overturn 900 with right,
press ENTER button to resume the program playing.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Stream media broadcast system
To enjoy music
1. Press up or down
button
to select "Music" option.
AAA Multimedia Player
2. Press ENTER button to enter
play menu.
USB
Picture
Movie
RETURN
HELP
Music
Music and Pic
3. Press up or down button to
select desired music, and
then press ENTER button to
play music.
ENTER
ZOOM
AAA Multimedia Player
The day went away .MP3
Note: The play file menu are
different with your USB device.
4. When playing music,
press up or down to select
play mode, (play mode:
standard, program, Random;
Repeat mode: Disc Repeat,
Folder Repeat, File Repeat)
and press ENTER button to
ensure the mode.
The day you wentaway.MP3
Play mode standard
5. When playing music, press
01 07 / 04 20
or
button to swap the
USB
next and previous music
6. Press RETURN button to exit
the playing.
RETURN
HELP
Note: 1. DISC Repeat mode: press up or down button,
ENTER
ZOOM
the DISC Repeat will appear on
the screen, and then press
The day went .MP3
Soft .MP3
Soft .MP3
The day went .MP3
ENTER to ensure it.
2. Program mode:
press or
button to select
Done
the music in right list, and press
ENTER button to program in turn,
and then press
button to
select "Done", and then press ENTER button
to ensure it.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Stream media broadcast system
To play Movie
1. Press up or down button to
select "Movie" option.
AAA Multimedia Player
USB
2. Press ENTER to enter play
Picture
RETURN
HELP
menu.
Movie
ENTER
ZOOM
Music
Music and Pic
3. Press again up or down
button to select desired
movie, and press again
ENTER button to play it.
AAA Multimedia Player
4. On screen display, press
E08-8SOBTILES-1
or
turn:
button to select in
File -PlayBack Control-Audio
channel-Play Mode
5. Press
or
button
to set speed, press ENTER button
to resume to standard mode.
USB
6. Press
or
button to
select the next movie or
previous.
RETURN
HELP
ENTER
ZOOM
7. Press RETURN button repeatedly
to return.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Stream media broadcast system
To select the Music and PIC item
1. Press up or down button
to select "Music and Pic"
USB
option, and press ENTER
AAA Multimedia Player
RETURN
HELP
button to enter menu.
ENTER
ZOOM
Picture
2. Press up or down to select
desired file, and press
Movie
Music
Music and Pic
button to ensure it.
(
to cancel). Repeat step
2 to select more file, and
press ENTER button to enter
play menu.
AAA Multimedia Player
F-007 .JPG
F-008 .JPG
F-009 .JPG
F-010 .JPG
F-011 .JPG
F-012 .JPG
3. On screen display menu,
press up or down to select
the speed to play.( Normal,
Slow, Fast).
Play
JPEG
0016.JPG
MP3
The day you went away .MP3
00 01:43
4. Press
to swap the next and previous
picture, press or
or
button
Play mode standard
IMAGE
button to select the music.
USB
Note: press pause button to
RETURN
HELP
stop playing the picture.
ENTER
ZOOM
5. Press repeatedly RETURN button
to return.
Note: On the music and picture, the playing music
is *.mp3 format.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Stream media broadcast system
Copy file function
1. Press up or down to select
"File Copy" item.
AAA Multimedia Player
2. Press ENTER button to enter
USB1
USB
the copy menu.
USB2
File Copy
RETURN
HELP
SETUP
3. Press ENTER button to
enter the file menu, and
press up or down button to
select "Card" or "USB"
Remove USB1
ENTER
ZOOM
Remove USB2
Press ENTER key to enter COPY menu
Select source Port:
USB1
USB2
4. Press ENTER button to enter
Card or USB, and select the
files to copy, then press
Root
F-007 .JPG
F-008 .JPG
F-009 .JPG
F-010 .JPG
F-011 .JPG
F-012 .JPG
HELP button to call up COPY
and PASTE, and then press
/
button to select
COPY, and press ENTER button
to confirm, press again
/
button to select
PASTE, then press
COPY
PASTE
ENTER button to paste, in this
time, the "File already exits,
overwrite it "will appears
on the screen, and press
Root
F-007 .JPG
F-008 .JPG
F-009 .JPG
F-010 .JPG
F-011 .JPG
F-012 .JPG
or
button to select
YES/NO, and then press ENTER
button to confirm.
5. Press ENTER to cancel.
Note:
button to selectthe
all files;
button to cancel.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Stream media broadcast system
To select language
1. Press or
"SETUP " item.
to select
AAA Multimedia Player
Card
2. Press ENTER button to
enter the SETUP menu,
USB
USB
File Copy
SETUP
RETURN
HELP
Remove USB
3.and press again ENTER
button to enter language
option.
Press ENTER button to SETUP menu
ENTER
ZOOM
AAA Multimedia Player
4. Press or to select
desired language, and
press ENTER to ensure it.
Languages
Version
5. Press RETURN button to
return.
To display the version
1. Repeat steps 1-2, and
then press or
select version.
to
AAA Multimedia Player
2. Press ENTER button to
display the version number.
V2.1.04250
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications and functions
Picture proportions 4:3/wide screen: (3 modes)
Panorama picture: 16:9
Picture element: 1366 768
Multi-input compatibility
Advanced technology for motion picture processing
Two speakers/optional
Complex component: RCA-pin
Component video signal: YUV
3
1
S terminal: Mini DIN 4-pin
1
RGB input: D-sub 15-pin 1 (480i/p, 720p, 1080i, 1080p)
Audio input: RCA-pin TYPE (L/R) 4: full support
separate audio frequency input
Audio system: stereo
Size: WxDxH unit: 1010mmX300mmX605mm
stand and speaker included
Working conditions
Power: 150V-240V, 50/60Hz
Power consumption: 140W
Temperature
Working: 5
35
Storage: -10
45
Humidity
Working: 20 80% Storage: 5 90%
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
- Early malfunctions can be prevented. Careful and regular cleaning can
extend the amount of time you will have your new TV. Be sure to turn the power
off and unplug the power cord before you begin any cleaning.
Cleaning the Screen
1. Here`s agreat way tokeep the dustoff your screen for awhile. Wet a soft clothin a
mixture of lukewarmwater and alittle fabric softeneror dish washingdetergent. Wring
the cloth untilit`s almost dry, and thenuse it towipe the screen.
2. Make surethe excess wateris off the screen, andthen let itair-dry before youturn on
your TV.
Cleaning the Cabinet
To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth. Please be sure
not to use a wet cloth.
Extended Absence
If you expectto leave yourTV dormant for a longtime (such asa vacation), it`sa good
idea to unplugthe power cordto protect againstpossible damage fromlightning or
power surges.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
For the sake of time and cost, it is strongly recommended that you check out
the problem byyourself according tothe instructions listedhereunder before
contacting the after-sales service for technical assistance.
Problem
Possible remedies
Turn on the power supply;
No picture,
no sound
Properly plug the TV set to the power socket;
Check to see if the power cable of other appliance is
plugged in the TV set. Make sure that the power cable
of the TV set is properly connected.
Good picture,
no sound
Depress the volume button;
Check out the audio frequency input signals.
Check to see if the remote controller display
receiving window are blocked by other objects and
if batteries are properly loaded.
Failure of remote
controller
Designate the item of color from the Picture menu
and depress the volume button;
No color, weak
color or poor picture
Keep the display and VCR separate a reasonable space;
Activate some functions to store picture brightness;
Make sure that the display and signal source are
available and turned on.
Excessive brightness
or darkness
Adjust brightness or contrast.
Picture too big or small
One speaker failure
Adjust the setup of sizes.
Balance the sound in the menu.
It is a normal phenomenon.
Slight sound from display
Note: Do not leave the television with static picture in an extended period as it may
result in residual image on your television screen.
Note: Production of the screen requires high and precision technologies. However,
there might be some dark or bright (red, blue or green) spots, or some anomalistic stripes or
spots. This is not defect. If the TV set is used in an area 2,400 meters above the sea level where
the air pressure is below 750hpa, the picture on the screen may be affected and a muffled sound
might be produced. These phenomena might happen in the area 1,500 meters above the sea
level. This is resulted from difference between air pressures inside and outside the display. This
is not a defect covered by the limited warranty.
NOTE
Design and specifications are subject to change without notice.
The dimension in this manual is a approximation.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
01
0090506321A
Download from Www.Somanuals.com. All Manuals Search And Download.
|