COLOR TV RECEIVER
OWNER'S MANUAL
The Owner`s Manual for the Follow Models:
29F9D-P, 29T9D-P,29F9D,29T9D
Please READ this manual carefully
before operating the unit, and keep
it for future reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and cautions
1. When you clean the TV set, please 4. Do not place the TV set near rain or
pull out the power plug from AC outlet.
Don't clean the cabinet and the
screen with benzene, petrol and other
chemicals.
moisture as it may cause an electric
shock, or the TV set to catch fire. The
TVsetmustonly
beusedindryin
door locations.
2. In order to prolong the using life of
the TV set, please place it in a well
ventilatedlocation.
5. The back cover must only be
removed by a registered electrical
service person. Removing the back
cover may result in electric shock, fire
or damage to
the TV set.
6. If the TV set is not going to be used
for a long time, or there is a severe
thunder & Lighting storm, it is
recommended that the TV set be
disconnected from the AC power outlet
and the aerial plug removed.
3. Don't place the TV
set in direct sunlight
ornearaheatsource.
Explanation on the display tube
In general, it is not needed to clean the tube surface. However, necessary,
it's surface can be cleaned with a dry cotton cloth after cutting off the power.
Don't use any cleanser. If using hard cloth, the tube surface will be damaged.
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Aerial connection
Generally speaking, to enjoy a clearer picture, we recommend that you use a CATV
system or an outdoor antenna .In different places, the suitable antenna type and position
are different.
300 twin-lead cable
Antenna adapter
(additional purchase)
Mixer
additional
purchase
75
coaxial cable
Antenna input
75 standard
coaxial type
Plug
(additional purchase)
AC power socket
Note
* It is recommended that you'd better use 75 coaxial cable to remove the
disturbance caused by airwave.
* Don't bind antenna cable and power wire together.
Preparation of the remote control unit
Battery installation
Take off the battery compartment cover. Place two AAAbatteries, make sure that battery
polarity matches with the +/- mark inside the battery compartment.
Operation notes for the remote control unit
Under normal conditions, the life time of batteries is one year.
If you don't intend to use the unit for a long period or the electricity of the batteries is
used up, remove the batteries to prevent batteries acid from leaking into the battery
compartment.
Don't throw your batteries into a fire. Dispose of your batteries with a specified method.
Avoid the falling and the wetting of the remote control unit.
Download from Www.Somanuals.com. All Manuals Search And Download.
Function buttons and external sockets
Front and side panel of the TV set
Side-set terminals
Video1 input
terminal
Left sound
track
Right sound
track
MENU
Volume up/ down
Power switch
Infrared sensor window
Power indicator
Channel selector
TV/Video
(input selector
Rear panel of the TV set
Antenna input
S-VIDEO
Video output terminals: VIDEO AUDIO L, R
Video 2 input terminals: VIDEO AUDIO L, R
S-VIDEO input terminal
DVD input terminals: Y, Cb, Cr AUDIO L, R
If you want to connect the TV set to the other audio/video equipment, please
refer to P22.
Download from Www.Somanuals.com. All Manuals Search And Download.
Buttons on the remote control
Buttons and Descriptions
MUTE
POWER
Mute Button
CALL
SWAP
Press to concealthe sound ofprograms.
Stand by Button
TV/AV
-/--
Screen Display Button
Swap function Button
TV andAV Exchange Button
To exchanger betweenTV and
other available videoinputs
Digital selector
1
4
2
5
8
0
3
6
7
SCAN
9
TIME
Program number Button
Program scan Button
Time menu
P.STD
FUNCTION
Picture mode selection
Function menu
CH+
Menu Select/Adjust Button
Use this buttonto adjust themenu,
the volume andthe channels.
Tune menu
VOL
-
VOL
+
MENU
CH-
Picture menu
PICTURE
TUNE
EXIT
Exit screen display
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching on/ off the TV set
In the following, the methods of using power switch and remote controller to switch
on/off power supply for the TV set will be explained.
Switching on/ off the TV set
Switching on/ off the TV set
1 Please press the power switch to switch on AC
power supply and the power indicator will light.
2 If the indicator is lighting in red, press the POWER
button on the remote control again.
Note
1 When you don't operate the TV set with a
remote control, you can turn on it directly
through pressing the P+/- buttons on the TV set
(Child Lock must be turned off).
4
AUTO
BG
2 If you want to exchange to standby status,
please press down the POWER button on the
POWER
remote control.
3 If you want to fully switch off the power supply
for the TV set, please press the power switch
button on the TV set.
Auto switch-off function
When the "Back" function is on, if an empty
channel is selected or the TV programs are
ended for the day, the power will be switched off 5
minutes later automatically. If the "OFF TIME" is
on, it will be switched off according to the
presetting time. The auto power off function does
not work under video input or when the
background is off.
(Note: If the "off timer" is less than 5 minutes, it
will be switched off automatically to the preset
Time. )
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV
You can watch TV program in a preset channel.
Watching TV program
How to select TV program
Select the desired program
1 Using "Program number" buttons
1
4
7
2
5
8
0
3
6
9
Directly enter thechannel number withthe numeric keypad
on the remotecontrol.
To select channel numbersfrom 10 ~99 press [-/--]button
and enter thetwo digit channelnumber
To select channel numbersfrom 100 ~218 press [-/--]button
twice and enterthe 3 digitchannel number
2 Using the CH+/- buttons
Press the CH+ button to select a channel number in number
increasing direction.
Press the CH- button to select a channel number in number
decreasing direction.
CH+
Select the desired sound
VOL
-
VOL
+
Press the VOL-/+ buttons on the remote or the front of the
TV set to adjust the volume level. The range is 0~99. When
the volume buttons are pressed the volume level is
displayed automatically on the TV screen.
MENU
CH-
If the colour or sound of a channel is abnormal
The settings of the colour
TUNE
system or the sound system
TUNE
COLOUR
SOUND
BAND
AUTO
BG
VHFL
OFF
0
may be wrong.
Press the TUNE button and
setting menu shown on the
right will display on the screen.
SKIP
PROGRAM
SEARCH
FINE TUNE
AUTO SEARCH
CH+
If picture colour is abnormal
VOL
-
VOL
+
Use the CH+/- buttons to select Colour then the
VOL-/+ buttons to change between Auto, PAL, NTSC,
SECAM and NTSC443. Press the EXIT button to save
MENU
CH-
the setting.
If the picture sound is abnormal
Use the CH+/- buttons to select Sound then press the
VOL-/+ buttons to select the sound system.
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV continued
Swapfunctionenablesquickswaptothelastwatchedprogram.
Auto scan function enables automatic successive scanning of all the programs in
memorywith "OFF"skipstatus(eachchannelwilllastabout2seconds).
Program swap and auto scan functions
Program swap
1 Suppose the channel number
you used just now is 8 and the
channel number you are using
is 18 (as shown in the figure).
18
AUTO
BG
SWAP
8
AUTO
BG
2 If you want to return to the
last watched program channel
8, you can simply press the
SWAP button.
18
AUTO
BG
3 If you want to return to
channel 18, press the button
again. Through this function,
you can easily change
between the channel you are
using and the channel you
used last time.
Auto program scan
1 If you want to select a
desirable program, you may
scan all the TV programs in
memory. You can simply press
the SCAN button to do this. The
programs will appear one after
another from beginning to end
(each channel number will last
about 2 seconds).
1
AUTO
BG
SCAN
2
AUTO
BG
SCAN
SCAN
3
AUTO
BG
SCAN
1
AUTO
BG
2 If you want to stop the function
during auto scanning, simply
presstheSCANbutton again.
Download from Www.Somanuals.com. All Manuals Search And Download.
Searching channel
This TV set has three methods to set the channels, which are respectively full
automatic, semi automatic and manual fine tune.
-
In this section, how to use the remote control to set the channel is explained. You
can also use the buttons on the TV set to set channel.
Full automatic mode
1 Press the TUNE menu button ,
TUNE
till the TUNING menu shown on
TUNE
COLOUR
SOUND
BAND
AUTO
BG
VHFL
OFF
0
the right display on the screen.
SKIP
PROGRAM
SEARCH
FINE TUNE
AUTO SEARCH
2 Press the CH+/- buttons to
select "AUTO SEARCH".
CH+
TUNE
COLOUR
SOUND
BAND
AUTO
BG
VHFL
OFF
0
VOL
-
VOL
+
MENU
SKIP
PROGRAM
SEARCH
FINE TUNE
AUTO SEARCH
CH-
3 Press the VOL+ button to
ensure automatic search
function operates. All channels
now playing program will be
automatically preset in order .
After the search has finished,
the first program number will
display on the screen.
Display function
CALL
Press the CALL button, then
the channel number and the
systems will be displayed on
the screen.
4
AUTO
BG
Download from Www.Somanuals.com. All Manuals Search And Download.
Searching channel
Continued
Semi-automatic search
Semi-automatic search
1 Press the CH+/- buttons or
PROGRAM NUMBER 0-9
buttons to choose desired
channels I.E. channel 1
1
AUTO
BG
TUNE
2 Press the TUNE menu button ,
till the TUNING menu shown on
the right display on the screen.
3 Press the CH+/- buttons to
select " SEARCH".
CH+
TUNE
COLOUR
SOUND
BAND
AUTO
BG
VHFL
OFF
0
VOL
-
VOL
+
MENU
SKIP
PROGRAM
SEARCH
FINE TUNE
AUTO SEARCH
CH-
4 Press the VOL-/+ buttons to
1
start searching.
The VOL- down button is used
for lower side program search.
The VOL+ up button is used for
higher side program search.
Repeat this step, till find the
desired channel.
To turn off the on-screen menu
In general, after you press the MENU button, the menu item
display (PICTURE, TIME, FUNCTION, TUNE, EXCHANGE,
ETC.) will automatically disappear within 15 seconds. If you
want to eliminate these contents immediately, please press
the EXIT button.
EXIT
Download from Www.Somanuals.com. All Manuals Search And Download.
Searching channel
Continued
Manual fine tune
Manual fine tune
If the picture and/or sound are poor, try using the FINE
TUNE feature. Do not use this feature unless
reception is poor.
CH+
1 Press the CH+/- buttons or
PROGRAM NUMBER 0-9
button to choose desired
channels I.E. channel 1
1
AUTO
DK
VOL
-
VOL
+
MENU
CH-
2 Press the TUNE menu button ,
till the TUNING menu shown on
the right display on the screen.
TUNE
3 Press the CH+/- buttons to
select " FINE TUNE".
TUNE
COLOUR
SOUND
BAND
AUTO
BG
VHFL
OFF
0
SKIP
PROGRAM
SEARCH
FINE TUNE
AUTO SEARCH
CH+
VOL
-
VOL
+
MENU
CH-
4 Press the VOL-/+ buttons all
through to carry out fine tune,
till the best picture and sound
are obtained.
1
FINE TUNE
152.25MHz
Download from Www.Somanuals.com. All Manuals Search And Download.
Searching channel
Continued
Program skip
Program skip
The Program skip feature enables you to skip/hide
programs that you do not wish to be displayed when
using the CH+/- buttons. These channels will still be
displayed by directly using the channel number
buttons on the remote control.
CH+
1 Press the CH+/- buttons or
PROGRAM NUMBER 0-9
button to choose desired
channels I.E. channel 1
1
AUTO
BG
VOL
-
VOL
+
MENU
CH-
2 Press the TUNE menu button ,
till the TUNING menu shown on
the right display on the screen.
TUNE
TUNE
COLOUR
SOUND
BAND
AUTO
BG
VHFL
OFF
0
3 Press the CH+/- buttons to
select "SKIP".
SKIP
PROGRAM
SEARCH
FINE TUNE
AUTO SEARCH
4 Press the VOL-/+ buttons to
turn the SKIP function "ON".
CH+
TUNE
COLOUR
SOUND
BAND
AUTO
BG
VHFL
ON
VOL
-
VOL
+
MENU
5 Press the TUNE button to close
the menu. When you use the CH+/-
buttons to select channel, this
channel will be skipped. However,
you can still use the PROGRAM
NUMBER buttons to select the
skipped channel numbers.
SKIP
PROGRAM
SEARCH
FINE TUNE
AUTO SEARCH
0
CH-
If you want to recover the skipped channel
1 Use the PROGRAM NUMBER buttons to select the channel
number to be recovered.
2 Repeat those steps just now.
3 Press the VOL-/+ buttons to turn the SKIP function "OFF".
Download from Www.Somanuals.com. All Manuals Search And Download.
Convenient picture and sound control functions
Multiple picture modes
How to select picture modes
You can quickly select the desired picture mode from
four preset modes and one customized mode.
P.STD
Press the P.STD button to select the
STANDARD
desired picture quality. Five kinds
RICH
of picture modes (i.e., "STANDARD",
"RICH", "USER","LISTEN",
USER
"SOFT" ) can be selected in turn.
LISTEN
SOFT
How to customize your own picture status
1 Press the PICTURE menu button , till the PICTURE menu
PICTURE
shown on the right display on the screen.
2 Press the CH+/- buttons to
PICTURE
select the item to adjusted,
then press the VOL-/+ buttons
to obtain the desired effect.
CONTRAST
BRIGHTNESS
COLOUR
SHARPNESS
*HUE
48
32
48
40
60
CH+
VOL
-
VOL
+
MENU
BLACK STRETCH OFF
CH-
I T E M
Press VOL-
Press VOL+
Strong
Weak
CONTRAST
BRIGHTNESS
COLOUR
Bright
Dark
Deep
Shallow
Soft
Sharp
SHARPNESS
*Hue
lean to green
lean to purple
Note:
The "Hue" item only appears when the colour system is NTSC.
Download from Www.Somanuals.com. All Manuals Search And Download.
Convenient picture and sound control functions
Continued
Black Stretch-(Automatically Increases the Contrast Rage)
Noise Reduce - (Picture Noise & Grain Reduction Circuit. Only use on poor reception.)
Black stretch and noise reduce
How to select BLACK STRETCH
PICTURE
1 Press the PICTURE menu
button , till the PICTURE menu
PICTURE
shown on the right display on the
CONTRAST
BRIGHTNESS
COLOUR
48
32
48
40
60
screen.
SHARPNESS
*HUE
CH+
BLACK STRETCH OFF
2 Press the CH+/- button to
select "BLACK STRETCH".
VOL
-
VOL
+
MENU
CH-
PICTURE
CONTRAST
BRIGHTNESS
COLOUR
SHARPNESS
*HUE
48
32
48
40
60
3 Press the VOL-/+ buttons to
turn the BLACK STRETCH
function "ON" or "OFF".
BLACK STRETCH ON
How to select NOISE REDUCE
1 Press the FUNCTION menu
button, till the FUNCTION menu
FUNCTION
shown on the right display on the
ENGLISH
FUNCTION
screen.
BACKGROUND
NOISE REDUCE
FADE
CHILD LOCK
AVL
CALENDAR
ON
ON
ON
OFF
ON
CH+
2 Press the CH+/- buttons to
select "NOISE REDUCE".
VOL
-
VOL
+
MENU
FUNCTION
ENGLISH
BACKGROUND
NOISE REDUCE
FADE
CHILD LOCK
AVL
CALENDAR
CH-
ON
OFF
ON
OFF
ON
3 Press the VOL-/+ buttons to
turn the NOISE REDUCE
function "ON" or "OFF".
Download from Www.Somanuals.com. All Manuals Search And Download.
Convenient picture and sound control functions
Continued
Mute function
Sound mute
1 Press the MUTE button on the
remote control and "MUTE" type
MUTE
face will display on the lower part
of the screen. At this time, the
sound of the TV set is turned off.
MUTE
2 If you want to recover the sound,
press the MUTE button again or
directly press the VOL-/+ buttons.
Download from Www.Somanuals.com. All Manuals Search And Download.
Time functions
Clock setting and timer on/off functions
Clock setting
The clock will only work if the TV set if left turned on
or in standby. When the set is disconnect from the
power supply or is turned off by the main power on
the front panel, the clock losespower and willneed to
be reset when the power is reconnected.
TIME
1 Press the TIME menu button,
and the TIME menu display on
the screen.
CH+
TIME
CLOCK
17:18
18:00
1
VOL
-
VOL
+
MENU
2Press the CH+/- buttons select ON TIME
"CLOCK", then press the VOL -
/+ buttons to adjust the time in
hour position; press again the
CH+/- buttons to select the
time in minute position, then
press the VOL -/ +buttons to
adjust the value of minutes .
ON PROG
OFF TIME
SLEEP TIMER
REMIND TIME
REMIND PROG
--:--
0
--:--
1
CH-
On/off timer
Using on/off timer function, the TV set can automatically
turn on to a preset program or shut down in a preset time.
1 Press the TIME menu button
to call up the TIME menu on the
screen.
TIME
TIME
CLOCK
ON TIME
ON PROG
OFF TIME
SLEEP TIMER
REMIND TIME
REMIND PROG
17:18
18:00
1
--:--
0
2 Press the CH+/- buttons to
select "ON TIME", then press
the VOL -/+ buttons to set the
value in hour position; press
again the CH+/- buttons to
select the minute position and
set the value of the minute.(take
18:00 as an example)
--:--
1
CH+
VOL
-
VOL
+
MENU
3 Press the CH+/- buttons to
select "ON PROG", then press
the VOL-/+ or program direct
number buttons to select your
desired channel (take 8 as an
example).
TIME
CLOCK
ON TIME
ON PROG
OFF TIME
SLEEP TIMER
REMIND TIME
REMIND PROG
CH-
17:18
18:00
8
23:00
0
--:--
1
4 Repeat step 1-2 to set OFF
TIME.(take 23:00 as an example)
Download from Www.Somanuals.com. All Manuals Search And Download.
Time functions
Continued
Sleep timer and program preset
Sleep timer
The TV set have 18 sections
0
option for sleep timer function
(each section has a time
interval of 10 minutes) (See right
chart):
10
20
TIME
170
180
1 Press the TIME menu button,
and the TIME menu display on
the screen.
TIME
CLOCK
ON TIME
ON PROG
OFF TIME
CH+
2 Press the CH +/- buttons to
select "SLEEP TIMER".
17:18
18:00
8
23:00
120
--:--
1
VOL
-
VOL
+
MENU
CH-
3 Press the VOL -/+ buttons to
SLEEP TIMER
adjust the SLEEP TIMER level. REMIND TIME
REMIND PROG
REMIND PROG function
Program remind timer, that displaysan on-screen reminder
prompt, when aprogram on adifferent channel is due tostart.
1 Press the TIME menu button
to call up the TIME menu on the
screen.
TIME
CLOCK
ON TIME
ON PROG
OFF TIME
SLEEP TIMER
REMIND TIME
REMIND PROG
TIME
17:18
18:00
8
23:00
120
2 Press the CH +/- buttons to
select "REMIND TIME", then
press the VOL -/+ buttons to
set the value in hour position;
press again the CH+/- buttons
to select the minute position,
and then set the value of the
minute.(take 19:00 as an
example)
19:00
1
CH+
VOL
-
VOL
+
MENU
3.Press the CH+/- buttons to
select "REMIND PROG", then
press the VOL -/+ buttons or
the program direct number
buttons to set the desired
channel (take 18 as an
TIME
CLOCK
ON TIME
ON PROG
OFF TIME
SLEEP TIMER
REMIND TIME
REMIND PROG
17:18
18:00
8
23:00
120
CH-
19:00
18
example).
NOTE: For REMIND PROG to
operate CHILD LOCK must be
turned off.
Download from Www.Somanuals.com. All Manuals Search And Download.
Set up function
Screen saver and childlock functions
How to start screen saver function
When the BACKGROUD function
is ON, the screen will turn
automatically as shown "NO
SIGNAL" of moving .
NO SIGNAL
1 Press the FUNCTION menu
FUNCTION
button till the FUNCTION menu
,
shown on the right display on the
screen.
FUNCTION
ENGLISH
2 Press the CH+/- buttons to
select "BACKGROUND" and press
the VOL-/+ buttons to turn the
BACKGROUND function "ON" .
BACKGROUND
NOISE REDUCE
FADE
CHILD LOCK
AVL
CALENDAR
ON
ON
ON
OFF
ON
CH+
VOL
-
VOL
+
MENU
CH-
Child lock function
Enables the TV front control buttons to be locked.
1 Press the FUNCTION menu
FUNCTION
button till the FUNCTION menu
,
shown on the right display on the
screen.
2 Press the CH+/- buttons to
select "CHILD LOCK" and press
the VOL-/+ buttons to turn
CHILD LOCK function "ON" .
CH+
FUNCTION
ENGLISH
BACKGROUND
NOISE REDUCE
FADE
CHILD LOCK
AVL
CALENDAR
ON
ON
ON
OFF
ON
VOL
-
VOL
+
MENU
CH-
NOTE:
All the control panel buttons on the front of the TV are disabled
when CHILD LOCK is turned on. The power switch will still turn
the TV set off.
Download from Www.Somanuals.com. All Manuals Search And Download.
Set up function
Continued
AVL and calendar functions
AVL function
1 Press the FUNCTION menu
FUNCTION
button till the FUNCTION menu
,
shown on the right display
on the screen.
FUNCTION
ENGLISH
BACKGROUND
NOISE REDUCE
FADE
CHILD LOCK
AVL
CALENDAR
ON
ON
ON
OFF
ON
CH+
VOL
-
VOL
+
MENU
2 Press the CH+/- button to select
"AVL" .
FUNCTION
ENGLISH
CH-
3 Press VOL-/+ button to turn the
BACKGROUND
NOISE REDUCE
FADE
CHILD LOCK
AVL
CALENDAR
ON
ON
ON
OFF
ON
AVL function "ON" or "OFF"
.
Calendar function
FUNCTION
1 Press the FUNCTION menu
button till the FUNCTION menu
,
shown on the right display on the
screen.
FUNCTION
ENGLISH
BACKGROUND
NOISE REDUCE
FADE
CHILD LOCK
AVL
CALENDAR
ON
ON
ON
OFF
ON
2 Press the CH+/- button to select
"CALENDAR" , then press the
VOL-/+ buttons to the CALENDAR
display on the screen.
CH+
VOL
-
VOL
+
MENU
3 Press the CH+/- buttons to turn
the YEAR/MONTH/DAY, press
VOL-/+ buttons to set or adjust
the YEAR/MONTH/DAY.
CH-
Download from Www.Somanuals.com. All Manuals Search And Download.
Set up function
Continued
Fade and select a language
Fade
The FADE control allows time for the picture tube to
warm up and gently turned on, which can help prolong
the life of the picture tube.
1 Press the FUNCTION menu
FUNCTION
button till the FUNCTION menu
,
FUNCTION
ENGLISH
BACKGROUND
NOISE REDUCE
FADE
shown on the right display on
the screen.
ON
ON
ON
OFF
ON
CHILD LOCK
AVL
CALENDAR
2 Press the CH +/- buttons to
select "FADE .
CH+
FUNCTION
ENGLISH
BACKGROUND
NOISE REDUCE
FADE
CHILD LOCK
AVL
CALENDAR
VOL
-
VOL
+
MENU
3 Press the VOL-/+ button to turn
ON
ON
ON
OFF
ON
the FADE function "ON" or "OFF"
.
CH-
Select a language
FUNCTION
1 Press FUNCTION menu
button till FUNCTION menu
,
shown on the right display
on the screen.
FUNCTION
ENGLISH
BACKGROUND
NOISE REDUCE
FADE
CHILD LOCK
AVL
CALENDAR
ON
ON
ON
OFF
ON
2 Press the CH+/- buttons to
CH+
select "
" .
VOL
-
VOL
+
MENU
CH-
3 press the VOL-/+ buttons to select
the desired language. Then all the
items will be displayed in the
selected language.
Download from Www.Somanuals.com. All Manuals Search And Download.
Position exchange functions
Exchange
Exchange
This feature enables TV programs that may be on a wrong TV
channel number to be swapped/exchanged. This feature is
very useful when Automatic Search Tuning has been used, to
reallocate the found programs to the correct channel numbers.
CH+
1 Press the MENU button till the
,
EXCHANGE menu display on
the screen.
VOL
-
VOL
+
MENU
EXCHANGE
PROGRAM 1
PROGRAM 2
EXCHANGE
6
2
CH-
2 Press the VOL-/+ buttons or the
PROGRAM NUMBER 0-9
buttons to set PROGRAM 1 TO 6.
3 Press the CH-/+ buttons to
select " PROGRAM 2".
CH+
VOL
-
VOL
+
MENU
4 Press the VOL-/+ buttons or
the PROGRAM NUMBER 0-9
buttons to set PROGRAM 2 TO 9.
CH-
EXCHANGE
PROGRAM 1
PROGRAM 2
EXCHANGE
6
9
5 Press the CH+/- buttons to
select "EXCHANGE".
CH+
VOL
-
VOL
+
MENU
6 Press the VOL-/+ buttons to set
"EXCHANGE".
CH-
EXCHANGE
PROGRAM 1
PROGRAM 2
EXCHANGE
6
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the TV set to the other video and audio equipment
Connecting to the other video and audio equipment
You can connect a stereo to theAUDIO output terminals on the TV set to enjoy sounds of
higher quality. VIDEO andAUDIO output terminals output the video and audio signals being
monitoredbytheTVset. Theelectriclevelsofvideoandaudiooutputsignalsarefixed.
To outside input
To video/audio input
DVD, VCD and other reproducing equipments
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting guide
If the TV set has breakdown, please check according to the following list.
C h e c k i n g
No power supply
No sound
If power line is connected?
Whether sound mute is used?
Whether the adjustments of contrast, colour and hue are suitable?
If the position of the TV set is changed during its work, the colour
shadow may appear.
If this case occurs, please switch off the power supply for TV set
and let it cool for about 30 minutes, then switch on the power
supply again.
Bad colour/ hue
If there are disturbances from automobile, motorcycle, electric car,
fluorescence lamp, blower etc?
If there are disturbances from the other TV set, PC, game machine and
wireless broadcasting station?
Colour spot
Scramble
Double or triple
image
Whether there is any reflection of broadcasting signal from mountain or building?
Whether the antenna position is changed or not?
Whether the antenna connection is disconnected or fallen off?
Whether the antenna position is changed or not?
Snowy picture
Whether the batteries in the remote control unit are used up or not?
Whether the installation of the batteries is correct or not?
The remote
control
do not work
Whether there is any barrier between the remote control and the infrared receiver?
Whether the infrared receiver is influenced by strong light?
Whether the main power supply is connected?
The cases shown below are not breakdowns:
The snapping sound is caused by the telescoping of the
cabinet due to the temperature changing. It is normal,
please use it reassuringly.
Snapping sound from the
cabinet of the TV set
This kind of uneven colour may be caused by bright picture
setting.
Uneven colour sometimes
appearing on a part of
the screen
Even colour can be recovered by decreasing contrast.
If the breakdown can't be cleared after you doing by above steps,
please get in touch with the local center of service and don't open
the back cover yourself.
e
t
o
N
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
PAL, SECAM, AV NTSC
Colour system
Sound system
Display tube
DK, BG
29" CRT
5W+5W
Sound output power
Power supply
~ 160-250V 50/60 Hz
Power consumption
Size
150W
773 width x594 depth x500 height
mm
Remote control
Owner's manual
Battery(AAA)
X1
X1
X2
Supplied
accessories
The design and specifications may be changed without notice.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|