TFT-LCD TELEVISION
OWNER`S MANUAL
MODEL: L42A9-AK
Please READ this manual carefully before
operating your TV, and retainit for future
reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENT
BEFORE OPERATING
Warning.................................................................................................................1
Important Safety Instructions................................................................................2
Buttons and interface location............................................................................. 4
Remote controller.................................................................................................6
Remote controller key function.............................................................................7
Effective range of remote controller......................................................................8
External equipment connections..........................................................................9
BASIC OPERATING
Switching on/off the TV set................................................................................ 14
Select input modes ........................................................................................... 15
Searching channel............................................................................................ 16
Watching TV program........................................................................................18
Picture control functions.................................................................................. .21
Sound control functions.....................................................................................23
Time functions....................................................................................................26
Function menu...................................................................................................28
Adjust menu.......................................................................................................29
OTHERS
Others functions................................................................................................32
Stream media broadcast system.......................................................................33
Specifications and functions..............................................................................43
Maintenance......................................................................................................44
Troubleshooting.................................................................................................45
Accessories
Color.SYS
Edit
Sound.SYS
Time.Skip
Scan
Swap
Shuttle
PIP
Zoom/Move
Forward
Sleep
USB
UP
Left/Prew
DON
Pause
Ritt
EX
Enter
ZOOM
HELP
Bracket
4
Power cable
Alkaline battery(AA)
2
Screws
8
User's manual
Remote controller
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning
WARNING
WARNING
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO
USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
*To avoid electric hazards, it is strongly suggested that the back cover not be opened, as
there is no any accessory inside the casing.
*If necessary, please contact authorized after-sales services.
*A lighting flash mark in a triangle: Apotentially hazardous situation, which, if not avoided,
could result in serious injury by high voltage.
*An exclamation mark in a triangle: Major part or accessory of which technical specifications
must be followed if it is to be replaced.
Warning:
To avoid fire or electric hazards, never place your television receiver in an area
with heavy moisture. Attention should be paid to avoid accidental scratches or
impacts onto the LCD screen.
Caution:
Please read this manual carefully before using your television and keep this
manual in a good place for future reference.
To achieve the best performance of your television, read this User's Manual
carefully and properly store it for future reference.
Information of screen displays and figures in the User's Manual may vary due
to technical innovations.
Caution:
Unauthorized disassembly of this product is prohibited.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
The product should be tightly fixed to avoid
drop damages and even fire.
To avoid fire hazards, do not use this
product under direct sunlight or closely
to heat sources.
Unplug the power supply and antenna of
the product when there is a rainstorm,
especially
Do not locate the product close to water
or oil, which may cause fire hazards.
Thunderstorm.
Do not use damaged or worn electric plugs
and keep electric cord away from heat sources
to avoid electric shocks or fire hazards.
Do not connect excessive sockets in parallel
or share the same socket by multiple plugs
to avoid fire hazards.
Unauthorized disassembly of the television
is prohibited to avoid electric shocks or fire
hazards. Contact
The product must be placed on a solid and
stable surface to avoid collapse.
authorized after-sales
service if technical
service is needed.
Keep the product away from a transformer
or heat source to avoid fire hazards.
Disconnect the product from power supply
and contact authorized after-sales service
if abnormal sound is heard in the product.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
Don't use or store inflammable materials
near the product to avoid explosion or fire
hazards.
Don't place the product in a humid area to
avoid fire hazards.
Never touch the plug when your hand is wet
as this might cause electric shocks.
The antenna of the product should be away
from electric cable to avoid
electric shocks.
Always make sure that the televisionis well
plugged as poor electric
connection might cause fire.
When antenna is used, measures should be
taken to prevent water
from flowing down
along the cable into
the television.
Unplug the television, use soft fabric, never
chemicals, if you are going to make
cleaning of the product.
Make sure that no
The plug and electric cable must be kept
clean to avoid electric
shocks or fire
hazards.
water drops in the
product.
Disconnect the television from power supply
to avoid electric shocks or fire
hazards in a long
Disconnect the television from power supply
and antenna when there is a
rainstorm or thunderstorm
to avoid electric shocks
vocation.
or fire hazards.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Buttons and interface location
- This is a simplified representation of front panel.
- Here shown may be somewhat different from your TV.
Front panel Control
TV/AV MENU
POWER
- CH +
- VOL +
Buttons and functions
1 Channel number increase and decrease.
2 Volume decrease:for lowering the volume or adjusting the menu.
Volume increase: for enhancing the volume or adjusting the menu.
3 TV/AVbutton
4 Menu button
5 Power and indicator: for turning on or off the power supply.
6 Remote receiving window
7 Card jack
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Buttons and interface location
Rear panel Control
USB Socket
VIDEO Input
Connects the videosignal
from a videodevice.
VIDEO
AUDIO Input
connect to hear
L
AUDIO
stereo sound froman
external device.
R
Switch power on/off
Power Cord Socket
This TV operates on AC power.
The voltage is indicated on
POWER
the specifications page.
Never attempt to operate the
TV on DC power
Video/Audio output
External Speaker
DVD/DTV Input
terminal
Connect ordinary video/audio
or other appliance
audio input terminals.
(8 ohm Output)
Connect to optional
external speaker(s).
(Component )
Connect a component
video/audiodevice to
these jacks.
Antenna Input
Connect cable or
antenna signals to
the TV, either directly
or through your
cable box.
EXT Subwoofer:
Subwoofer audio output
terminal.
VGA IN
COMPONENT IN
DVI IN
AV OUT
AV IN
R
L
AUDIO OUT
WOOFER
VGA
AUDIO
Pr/Cr
Pb/Cb
Y
L
AUDIO
R
DVI
AUDIO
L
R
VIDEO S-VIDEO
L
AUDIO
R
ANT IN
VIDEO
AUDIO
Audio/Video Input
VGA Input
S-Video Input
DVI Input
Connect the monitor
output connector from
a PC to the jack
Connect audio/video or
S-Video out from an
audio/video or S-Video
device to these jacks.
Connect the monitor output
connector from a PC to the
appropriate input port.
Audio input
for linking PC or
Audio input
for linking DVI or
Earphone jack
Earphone Audio output
terminal
other appliance audio
frequency output terminals.
other appliance audio
frequency output terminals.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote controller
Battery loading
1.Slide open the cover of the battery compartment on the back of the remote controller.
2.Load two 5# alkaline batteries in the compartment. (plus and minus poles to respective
mark)
3.Replace the cover of the battery compartment.
1
2
3
Precautions
As strong light may interfere the
signals, change your position to
operate the remote controller if
the television cannot be turned
on or off as you expect.
Make sure that two AA alkaline batteries
are loaded. The batteries must be of the
same type. The batteries must be
located properly. The batteries are not
rechargeable.
Make sure that there is no obstacle
between the remote controller and
television set.
Keep the remote controller away from
heat source or humid area to ensure
effective performance of the remote
controller.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote controller key function
Calendar
no available
Picture still
MUTE
Switches the sound on or off.
POWER
Turns your TV or any other
programmed equipment on
or off, depending on mode.
S-Video mode
select S-Video.
PC/DVI mode
Select PC/DVI mode.
TV/VIDEO
DVD mode
Select DVD mode
NUMBER buttons
Q.VIEW
Return to the last channel
viewed.
CHANNEL select
is not available
Information display
Display of current channel
signals, program and systems
OK button
VOLUME UP/DOWN
Increases/decreases
the sound level.
CHANNEL UP/DOWN
Selects available channels
found with Auto search.
Picture mode option
Normal, Soft,
Bright, Personal
Zoom
MENU
Brings up the main menu
to the screen.
Sound mode option
Theater, Personal,
Standard, Music
Auto adjustment
(PC status only)
Color.SYS
Edit
Sound.SYS
Time.Skip
Scan
Swap
Shuttle
Color system option
no available
Sound system option
no available
PIP
Zoom/Move
Sleep
USB
OSD Position button
Program edit
no available
Left/Prev
FWD
UP
no available
Time skip button
no available
Right/Next
REV
EXIT
DOWN
Pause
PIP mode buttons
are not available
Enter
ZOOM
HELP
Nicam select button
Scan
scan program
Sleep button
Shuttle button
no available
USB system buttons
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Effective range of remote controller
Effective range
above
20
20
below
45
45
right
left
front 8m
Color.SYS
Edit
Sound.SYS
Time.Skip
Scan
Swap
Shuttle
PIP
Zoom/Move
Forward
REV
Sleep
USB
UP
Left/Prew
DOWN
P
Right/Next
EXIT
Etr
ZOM
HE
Ensure the remote controller is pointed toward the remote controller
windows on the display.
No obstacles should be placed between the remote controller and
the remote controller window.
The effective receiving scope for the signal is 8 meters to the front of
the remote controller windows, and 45 to the left or right side and 20
above or below the control windows.
Use of remote controller:
1. To ensure a normal operation, the remote controller should not be
dropped or damaged in any way .
It should also be kept dry and away from all heat sources.
2. Battery replacement is necessary when the remote controller acts
inconsistently or stops operating the display.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
External Equipment Connections
- Antenna or Cable Service without a Cable Box Connections
- For optimum picture quality, adjust antenna direction if needed.
outdoor
antenna
Antenna input
75 standard
coaxial type
ANT IN
75 coaxial cable
300 twin-lead cable
Plug
Antenna adapter
(additional purchase)
Note
* It is recommended that you'd better use 75 coaxial cable to remove the
disturbance caused by airwave.
* Don't bind antenna cable and electric wire together.
To improve picture quality in a poor signal area, purchase
and install a signal amplifier.
If the antenna needs to be split for two Tv`s, install a 2-
WaySignal Splitter in the connections.
If the antenna is not installed properly, contact your dealer
for assistance.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
External Equipment Connections
DVDsetup
Howtoconnect
1. Connect the DVD video outputs (Y, Pb/Cb,
Pr/Cr) to the COMPONENT (Y, Pb/Cb, Pr/Cr)
INPUT jacks on the TV and connect the DVD
audio outputs to the AUDIO INPUT jacks on
theTV, asshowninthefigure.
COMPONENT IN
AV IN
2. If your DVD only has an S-Video output
jack, connect this to the S-VIDEO input on
the TV and Connect the DVD audio outputs
to the AUDIO INPUT jacks on the TV, as
showninthefigure.
AUDIO
S-VIDEO
L
AUDIO
R
Pr/Cr
Pb/Cb
Y
L
R
VIDEO
NOTE: If your DVD player does not have
componentvideooutput, useS-Video.
Howtouse
1. Turn on the DVD player, insert a DVD.
2. Use the S-Video button on the remote
controltoselectS-VIDEOmode.
or
3. Press Play button on external equipment
forprogramplay.
DVD
4. Refer to the DVD player's manual for
operating instructions.
DTVsetup
-To watch digitally broadcast programs,
purchase and connect a digital set-top box.
VGA IN
COMPONENT IN
DVI IN
Howtoconnect
Use the TV`s COMPONENT (Y, Pb/Cb,
Pr/Cr) INPUT jacks, VGA or DVI port for
video connections, depending on your set-
top box connections available. Then, make
the corresponding audio connections.
AUDIO
AUDIO
DVI
VGA
Pr/Cr
Pb/Cb
Y
L
R
AUDIO
Howtouse
1. Turn on the digital set-top box. (Refer to
the owner`s manual for the digital set-top
box.)
2. Use YUV on the remote control to select
YUV(Y, Pb/Cb, Pr/Cr)mode.
or
or
RGB-DTV OUTPUT
R
AUDEO L
DVI-DTV OUTPUT
R
AUDEO
L
R
AUDEO
Y
Pb
Pr
3. Press Play button on external
equipment for program play.
Digital Set-top Box
10
Download from Www.Somanuals.com. All Manuals Search And Download.
External Equipment Connections
PCsetup
Howtoconnect
1. Togetthebestpicturequality, adjustthePCgraphicscardto(L42A9-Ak->1024x768),60Hz.
2. Use the TV`s VGA INPUT or DVI (Digital Visual Interface) INPUT port for video connections,
dependingonyourPCconnector.
If the graphic card on the PC does not output analog and digital RGB simultaneously, connect only
one of either VGA INPUT or DVI INPUT to display the PC on the TV.
If the graphic card on the PC does output analog and digital RGB simultaneously, set the TV to either
VGA or DVI; (the other mode is set to Plug and Play automatically by the TV.)
3. Then, make the corresponding audio connection. If using a sound card, adjust the PC sound as
required.
Howtouse
1. Turn on the PC and the TV.
2. Turn on the display by pressing the POWER button on the TV's remote control.
3. Use PC/DVI on the remote control to select PC or DVI source.
4. Check the image on your TV. There may be noise associated with the resolution, vertical pattern,
contrast or brightness in PC mode. If noise is present, change the PC mode to another resolution,
change the refresh rate to another rate or adjust the brightness and contrast on the menu until the
picture is clear. If the refresh rate of the PC graphic card can not be changed, change the PC graphic
cardorconsultthemanufacturerofthePCgraphiccard.
NOTES:
1
2
UseaDVIcable.
Avoid keeping a fixed image on the TV's screen for a long period of time. The fixed image may
become permanently imprinted on the screen.
The synchronization input form for Horizontal and Vertical frequencies is separate.
3
VGA IN
DVI IN
AUDIO
DVI
VGA
AUDIO
11
Download from Www.Somanuals.com. All Manuals Search And Download.
External Equipment Connections
Connect Loudhailer
Loudhailer
1. Face the LCD screen upside down on a
clean blanket or a bracket and pay
attention not to indent the casing. Lay the
two speaker aside of the LCD.
2. Lay annectent bracket on the speaker
and hind rind, Fix 8 ST4X8 screws to the
speaker and hind rind.
3. Connect the speaker cable to the
speaker terminal of LCD TV and the
speaker terminal, and insert the
connecting cable intothe terminal slot,
Release the speakerterminal, and ensure
that the white connecting cable is inserted
in the terminalslot marked redand black
connecting cable isinserted in theblack
terminal slot, and that anode and cathode
poles are correctly connected.
Screw hole
Annectent
bracket
R
L
AUDIO OUT
WOOFER
Connect Woofer
1. Take the wooferout, and placeit the hindrind. (See picture)
2. Connect cable to the woofer terminal and
LCD TV terminal, and insert the connecting
cable into the terminal slot.
Woofer
R
L
AUDIO OUT
WOOFER
12
Download from Www.Somanuals.com. All Manuals Search And Download.
External Equipment Connections
Connecting Headphones
You can connect a set of headphones to your set if you wish to watch a
TV programme withoutdisturbing the otherpeople in theroom.
Plug a set of headphones into the 3.5mm
mini-jack socket on the rear panel of the set.
ANT IN
Note
Prolonged use of headphones at a high volume
may damage your hearing.
You will not receive sound from the speakers
when you connect headphones to the system.
Power source
TO USE AC POWER SOURCE
Use theAC polarized linecord provided for
operation onAC. Insert theAC cordplug into
a standard polarizedAC outlet.
AC Outlet
Wider Hole
and Blade
NOTES:
Never connect theAC line cord plug toother
than the specifiedvoltage. Use theattached power
cord only.
If the polarizedAC corddoes not fitinto a non-
polarized ACoutlet, do notattempt to fileor cut
the blade. Itis the user`sresponsibility to have
an electrician replacethe obsolete outlet.
If you causea static dischargewhen touching
the unit andthe unit failsto function, simply
unplug the unitfrom theAC outlet andplug it
back in. The unit shouldreturn to normaloperation.
Polarized ACCord Plug.
Polarized AC Cord Plug
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching ON/OFF the TV set
In the manual, the OSD (on screen display) may be different from your TV`s because it
is just an example to help you with the TV operation.
Power ON/OFF
Switching ON/OFF the TV set
1 Please press down the power switch to
switch on AC power supply and the power
indicator will light .
2 If the indicator is lighting in red, press
POWER button on the remote control again.
Indicator
TV/AV MENU
- CH +
- VOL +
POWER
3 If you want to exchange to standing by
status, please press down POWER button on
the remote controller.
Remote receiving
window
4 If you want to fully switch off the power
supply for the TV set, please press down the
power switch button on the TV set.
Choose the Menu Language
When you start using your set for the first time,
you must select the language which will be
used for displayingmenus and indications.
1 Press MENU and VOL+/-button to select
the FUN. Menu.
2 Press CH+/-button to select Language.
3 Select a particular language by pressing
VOL+/- button repeatedly.
You can choose oneof two languages.
(Chinese or English)
4 When you are satisfied with your choice,
press MENU button to return to normal
viewing.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Select input modes
Choose the input source
If you hope to enjoy the picture from the external
input source, before to select the source, you need
to connect thedevices, otherwise, whenyou select
the source, the none or no signal will appears on the
screen.
Source
Press TV/AV button on remote
controller, the menu appears
on the screen. Then press
CH+/- to select the TV item,
and press VOL+/- to ensure it.
TV: the input source from ANT IN terminal output.
AV1: the input source from AV1 terminal output.
AV2: the input source from AV2 terminal output.
YPbPr/YCbCr: the input source from YPbPr terminal
output.
VGA: the input source from VGA IN terminal
output.
DVI: the input source from DVI IN terminal
output.
USB: the input source from USB socket terminal
output.
Before watching TV program, you need to ensure
your TV in TV mode.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Searching Channel
This TV set has three methods to set channels, which are respectively full automatic,
manual search fine tune.
In this section, how to use the remote control to set channel is explained. You can also use
buttons on the TV set to set channel.
Full automatic search mode
Automatic search
1 Press the MENU button and
Color Sys.
Sound Sys.
Manual Search
Store Program
Fine Tune
Auto
D/K
VOL+/- button, till tuner menu
shown on the right display on
the screen.
---
49.75MHz
Off
Skip
Auto Search
Prog. Switch
A
B
C
Note : the tuner menu will be
only operated in normal TV mode.
2 Press the CH+/- buttons to
select "Auto Search" item.
VHF-L 188.16
3 Press the VOL+ button to
ensure automatic search
function work.
After the search has finished, all channels now playing
program will be automatically preset in order.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Searching Channel
Manual search
Manual search
1 Press the CH+/- buttons or the
TV01
AUTO
D/K
PROGRAM NUMBER 0-9
button to choose desired
channels regard channel 1 as
example
2 Press the MENU button and
VOL+/- button, till the TUN.
menu shown on the right display
on the screen.
Color Sys.
Sound Sys.
Manual Search
Store Program
Fine Tune
Auto
D/K
---
49.75MHz
Off
Skip
Auto Search
Prog. Switch
A
B
C
3 Press the CH+/- buttons to
select " Manual Search" item.
VHF-L 188.16
4 Press the VOL-/+ buttons to
start searching.
When searching successfully for the channel, the Manual search
stopping automatically, at this time, press CH- button to select
Store Program, then press VOL+/- to set the store.
Fine tune
If the picture and/or sound are poor, try using the FINE
TUNE feature. Do not use this feature unless reception
is poor.
1 Repeat step 1-2, then press CH+/- buttons to select
" Fine Tune" item.
Color Sys.
Sound Sys.
Manual Search
Store Program
Fine Tune
Auto
D/K
2 Press VOL-/+ buttons repeatedly
to carry out fine tune, till the best
picture and sound are obtained,
then loosen the button.
---
49.75MHz
Off
Skip
Auto Search
Prog. Switch
A
B
C
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV Program
You can watch TV program in a presetting channel.
Watching TV program
To select the TV mode
Before watching TV program, you may ensure your TV in
TV mode.
Press TV/AV button to select tv mode.
How to select the desired program
1 Using "Program number" buttons.
Directly enter the channel number with the numeric keypad
on the remote control.
If to select channel numbers of double-digit or three-figure ,
press continuously the numeric buttons in three second.
2 Using the CH+/- buttons.
Press the CH+ button to select a channel number in number
increasing direction.
Press the CH- button to select a channel number in number
decreasing direction.
How to select the desired sound
Press the VOL-/+ buttons on the remote or the front of the
TV set to adjust the volume level. The range is 0~100.
When the volume buttons are pressed the volume level is
displayed automatically on the TV screen.
Volume
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV Program continued
Watching TV program
If the color of some channel is abnormal
Usually this should be set in the
auto position. However if the color
Color Sys.
Auto
D/K
Sound Sys.
displayed on the screen are incorrect,
Manual Search
Store Program
---
you can manually select the correct
Fine Tune
49.75MHz
Off
color system.
Skip
Auto Search
Press the menu and VOL+/- button,
Prog. Switch
till the picture menu shown on the
A
B
C
right will display on the screen.
If picture color is abnormal
Press the CH+/- buttons to select "color sys.", then press the
VOL-/+ buttons to select the correct color system. In general,
you can set it as "AUTO".
If sound is abnormal
Press the CH+/- buttons to select "sound sys.", then press the
VOL-/+ buttons to select the correct sound system. In general,
you can set it as "D/K".
Skip
After the programs are presetting, you can skip some
programs so that to select your favorite channels only.
1. Press CH+/- button or Direct-digit
choosing button to select a channel
directly (take channel 18 for
example).
Color Sys.
Sound Sys.
Manual Search
Store Program
Fine Tune
Auto
D/K
---
49.75MHz
Off
Skip
2.Press MENU CH+/-and VOL+/-
button, till the TUN. menu shown
on the right will display on the
screen.
Auto Search
Prog. Switch
A
B
C
3. press VOL-/+button to setSkip On.
4. press MENU exit.
If you want to recover the skipped channel
1. Use Direct-digitChoosing button toselect the number
of the channel to be recovered.
2. Do theabove steps again.
3. Press VOL+/-button to setSkip OFF.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV Program continued
Watching TV program
Prog. Switch
1.Press MENU CH+/-and
Color Sys.
Sound Sys.
Manual Search
Store Program
Fine Tune
Auto
VOL+/- button, tillthe TUN.
menu shown onthe right will
display on thescreen.
D/K
---
49.75MHz
Off
Skip
Auto Search
Prog. Switch
2. Press CH-/+button to select
Prog.Switch.
A
B
C
3. Press VOL+ toenter the
submenu, and pressthe digital
button to setthe desired
channel number,
Current Prog.
To Prog.
000
001
Switch
Press CH+ buttonto To Prog.
Press the digitalbutton to set
the exchange channelnumber,
press CH+ buttonto Switch,
then press VOL+button to
ensure.
A
B
C
4. press MENUexit.
Quick program view
This t function enables quick swap to the last watched program.
1
Suppose the channel number you
used just now is 8 and the channel
number you are using is 18 (as shown
inthefigure).
2
If you want to return to the last
watched program channel 8, you can
simplypress theQ.Viewbutton.
3
If you want to return to channel 18,
press the button again. Use this
function, you can easily change
between the channel you are using
and the channel you used last time.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture Control Functions
Multiple picture modes
How to select picture modes
You can quickly select the desired picture mode from
three preset modes and one customized mode.
Press the PSM button to select the
PIC. Mode
desired picture quality. Four kinds
of picture modes (i.e., "Normal",
"Soft", "Personal", "Bright" )
can be selected in turn.
Bright
Normal
Soft
Personal
The 4 modes are
Picture mode
Picture quality
A spare setting that can be adjusted to
personal tastes
Personal
Designed for rooms that have good all round
lighting
Normal
Soft
Designed for nighttime low lightviewing
Designed for rooms with high ambient
lighting such as daytime sport;
Bright
How to customize your own picture status
1 Press the MENU button and
VOL+/VOL- button , till the
PIC menu shown on the right
display on the screen.
Mode
Personal
50
50
50
Contrast
Brightness
Chroma
Hue
0
50
Sharpness
BackLight
DNR
50
Auto
A
B
C
2 Press the CH+/- buttons to
select the item to be adjusted,
then press the VOL-/+ buttons
to obtain the desired effect.
Brightness
I T E M
Press VOL-
Press VOL+
Brightness
Contrast
Dark
Bright
Weak
Soft
Strong
Sharp
Deep
Sharpness
Chroma
Shallow
More purple
Green
More green
Red
Hue(only in NTSC mode)
BackLight
NOTE these items are adjustable only under the personal setting.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture Control Functions
Multiple picture modes
DNR( Digital Noise Reduction)
Automatically filters outand reduces theimage
noise and improvespicture quality whenreceiving
weak video signals.
1 After calling up the
Picture menu, press
Mode
Personal
50
50
50
Contrast
Brightness
Chroma
Hue
CH+/- button to select
"DNR" item.
0
50
Sharpness
BackLight
DNR
2 Press VOL+ to enter
the list. Select Off,
50
Auto
A
B
C
Auto, Weak, Medium
or Strong according
to the image noise.
3 Press MENU return
to the picture menu.
In other modes
TV/AV1/AV2/USB
YPbPr/YCbCr
Mode
Personal
Mode
Personal
50
50
50
Contrast
Brightness
Chroma
Hue
50
50
50
Contrast
Brightness
Chroma
Hue
0
50
0
50
Sharpness
BackLight
DNR
Sharpness
BackLight
DNR
50
50
Auto
Auto
A
B
C
A
B
C
Only N system.
VGA/DVI
No adjustable
Mode
Personal
50
50
50
Contrast
Brightness
Chroma
Hue
No adjustable
0
50
Sharpness
BackLight
DNR
50
Auto
A
B
C
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound Control Functions
Multiple sound modes
How to choose sound mode
Press the SSM button to select the
desired sound quality. Four kinds
of sound modes (i.e., Standard
SOU. Mode
Music
,
Standard
Theater
Theater
,
Personal ,and
Music ) can be selected in turn.
Personal
Sound mode
Personal
Standard
Music
Sound quality
A spare setting that can be adjusted to
personal tastes
normal sound with moderate bass and treble
setting
Designed to reduce the bass and treble which
enhances the voice for news programs
Enables extra bass and treble to enhance the
movie experience;
Theater
How to customize your own sound quality
1 Press MENU button and
Volume
Balance
SOU. Mode
Treble
50
0
VOL+/- button , till the SOU.
menu shown on the right
display on the screen.
Personal
50
Bass
70
Surround
AVC
On
Off
Woofer
Off
2 Press CH+/- buttons to
select the item to be
adjusted, then press VOL-/+
buttons to obtain the desired
effect.
A
B
C
Treble Increases or decreases the treble.
Bass Increases or decreases the bass.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE these items areadjustable only underthe personal setting.
Sound Control Functions
(Continue)
Balance
This will adjustthe output ofthe right andleft speakers to
obtain the beststereo reproduction foryour listening
position.
The intermediate value is 0. When indication value of Balance
increases toward+50, sound of the right and left speaker
becomes stronger and weaker, respectively. When indication
value of Balance decreases toward -50, sound of the right
and left speaker becomes weaker and stronger.
Press CH+/- buttonto Select Balance,
Press VOL+ buttonto increase the audio output in the right
speaker;
press VOL- buttonto increase theaudio output in the left
speaker.
surround sound
The surround sound feature expandsthe audio listening
field wider anddeeper to create exceptional sound
quality from the TV`s speakers.
Press CH+/- button to Select Surround,
press VOL+/- button to set Surround as Off or On
AVC( Auto volume contol)
Each broadcasting stationhas its ownsignal conditions,
and so itis not easyfor you toadjust the volumeevery time
the channel ischanged. This featurelets you automatically
adjust the volumeof the desiredchannel and reducesthe
volume differences between channels andprograms,
providing a moreconstant overall level. This will also
reduce the dynamicsof sound.
Press CH+/- button to Select AVC,
press VOL+/- button to set Surround as Off or On
Woofer sound
Woofer is a speaker that complements front speaker`s
reproduction capability oflow-pitched sound.
Press CH+/- button to Select Woofer,
press VOL+/- button to set Surround as Off or On
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Mute
How to eliminate sound
When you need to pay attention to surrounded sounds,
or there is a telephone calling you or there are some
guests visiting you, the sound elimination (mute)
function is very convenient.
1 Press the MUTE button on
the remote control and "MUTE"
type face will display on the
lower part of the screen. At this
Mute
time, the sound of the TV set
is turned off.
2 If you want to recover the
sound, press the MUTE
button again or directly press
the VOL-/+ buttons.
MUTE
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Time Functions
Clock setting and timer on/off functions
Clock setting
The clock will only work if the TV set is turned on or
in standby. When the set is disconnect from the
power supply or is turned off by the main power on
the rear panel, the clock loses power and will need
to be reset when the power is reconnected.
1
Press MENU button and VOL+/-
button, and the TIME menu display
Clock
--:--
--:--
--:--
000
--:--
000
Off Time
On Time
on the Screen.
On Prog
Remind Time
Remind Prog.
2
Press CH+/- buttons select
"Clock",press VOL -/+ buttons to
select hour or minute position, then
press the digital buttons to set the
value of hour or minute;
A
B
C
On/off timer
Using on/off timer function, the TV set can automatically
turn on to a preset program or shut down in a preset time.
1
Press CH+/- buttons to select
Clock
--:--
--:--
--:--
000
--:--
"On time", press VOL-/+buttons
to select hour or minute position;
then press the digital buttons to
set the value of hours or
minutes.
Off Time
On Time
On Prog
Remind Time
Remind Prog. 000
A
B
C
2
Press CH+/- buttons to select
NOTE:
"On prog", then press the digital
buttons to select your desired
channel.
1.If Clock option is setting,
the time you set for OffTimer
/On Timer will be a point
of time. Otherwise, if Clock
is not set, the time you set for
Off Time/OnTime will be a
period of time.
3
Repeat step 1-2 to set Off time
.
2.Sleep Off/ Off Time can not
be set at simultaneously.
If both of the two are set, the
later setup will be operation.
Indication will appear on the screen 1 minute prior to
expiry of set time.
Suppose Timer Off is set, and indication is as follows:
Timer Off
When the aboveindication appears onthe screen,
set time maybe changed ifVOL+/- button ispressed.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Time Functions
Remind Time and Remind Program setting
How to use the remind time and program
Program remind timer, that displays an on-screen
reminder prompt, when a program on a different
channel is dueto start.
1 Press MENU and VOL+/-
Clock
--:--
--:--
--:--
000
--:--
Off Time
On Time
On Prog.
Remind Time
button to call up the TIME
menuonthescreen.
Remind Prog. 000
2 Press CH+/- buttons to
A
B
C
select
"Remind Time",
then press VOL -/+ buttons
to select hour or minute
position; then press the
digital to set the value of
hour or minute.(take 19:30
asanexample)
Clock
--:--
--:--
--:--
000
--:--
Off Time
On Time
On Prog.
Remind Time
Remind Prog. 000
3 Press CH+/- buttons to
move the cursor to "Remind
Prog.", then press the digital
buttons to set the desired
channel.
A
B
C
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Function menu
It is possible to select language, OSD transparency, menu timeout, calendar,
3A optimize, time skip.
Function menu operation
1.Press MENU andVOL+/-
Language
English
15seconds
Translucent
Off
button to enter the FUN.
Menu.
Menu Timeout
Menu Background
Blue Screen
Calendar
2. Press CH+/- to select
desired item.
3A Optimize
Time Skip
Off
0Min
3. Press VOL+/- button to
adjust the values level.
A
B
C
4. Press menu to exit.
No adjustable in YPbPr/YCbCr/
VGA/DVI/USB modes
No adjustable in AV/AV2/YPbPr/
YCbCr/VGA/DVI/USB modes
Menu Timeout
Repeat step 2 and 3 to set the menu out time.
Each Press of VOL+/- button repeatedly to select the
number of preset minutes, the time will be set in
sequence: 5seconds, 10seconds, 15seconds,
20seconds, 25seconds, 30seconds, 40seconds.
Menu Background
Repeat step 2 and 3 to select semi transparency and
opaque background of OSD.
Blue Screen
Repeat step 2 and 3 to select Blue Screen.
If you select ON, when no signal, the background is
blue; if you select OFF, when no signal, the
background is dark.
3A Optimize
Repeat step 2 and 3 to set the 3A optimize as on or
off.
The 3Aoptimize tracks picturecontrast and colorto
improve the qualityof picture interms of brightness
and sharpness.
Calendar
Repeat step 2to select
the Calendar, press
VOL+ button tosearch
the desired year or
month.
Press CH+/CH- button
to adjust the desired
year or month.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjust menu
1.Press MENU and VOL+/- button to enter the
ADJ. menu.
Display Mode
Adjust
Normal
2. Press CH+/- to select
desired item.
RGB
Default
3. Press VOL+/- button to
adjust the values level.
Auto Sync.
Color Temperature Normal
4. Press menu to exit.
Black Stretch
On
A
B
C
Display Mode
Repeat step 2 and 3 to set the Display Mode.
4:3
Choose 4:3 when you wantto view apicture with anoriginal
4:3 aspect ratio, with black barsappearing at boththe
left and rightsides.
Wide Screen
Choose Wide Screen when you wantto adjust thepicture
horizontally, in a linearproportion to fillthe entire screen.
Normal
Choose Normal when you wantto view thepicture without
any alteration. However, the topand bottom portionsof the
picture will becropped.
You can also press ZOOM button on remote controller to
select the desired picture ratio.
Color temperature
Repeat step 2 and 3 to set the Color temperature.
There are four kinds of modes (i.e., "Normal","Cold" ,
"Green","Warm" )can be selected in turn.
This will increaseor decrease Warm (red) and Cool
(blue) colors to suit personal preferences. Select Cool
to give the white colors a blue tint, Normal to give the
white colors a neutral tint, Warm to give the white
colors a red tint. Green to give the white colors a
green tint.
Black Stretch
Black Stretch-(Automatically Increasesthe Contrast
Rage)
Repeat step 2 and 3 to set the Black Stretch.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjust menu
In VGA and DVI input mode, H-Position and V-Position can be adjusted to
eliminate transverse line interference and decentered picture.
PC setting
PC setting
Press PV/DVI button to select PC or DVI mode.
1 Press MENU button and VOL+/VOL- button , till the ADJ.
Menu display on the screen.
2 Press CH+/- buttons to select the item to be adjusted, then
press VOL+/- buttons to adjust.
Display Mode
Adjust
Normal
RGB
Only be adjustable
in the VGA/DVImode.
Default
Auto Sync.
Color Temperature Normal
Black Stretch
On
A
B
C
Adjust
This will adjust the picture of H-positon, V-positon, H-size, V-size
and Fine Tune.
Press CH+/- buttons to select
0
0
0
0
H Size
Adjust, then press VOL-/+
H Position
V Size
buttons to enter the sub menu.
V Position
Fine Tune
0
A
B
C
Note:
1. As adjusting H position or V
position parameter, It is
natural that the picture will
have faintness once in a while
if the range is more, then to
adjust contrarily to normal
position.
2. H-position,V-position,Auto
Adjust are not available in TV
mode.
3. Auto Adjust is not available
inAVandS-VIDEOmode.
H Size Horizontal size of picture can be adjusted in this item.
H Position: Horizontal position of picture can be adjusted in this
item.
V Size: Vertical size of picture can be adjusted in this item.
V Position: Vertical position of picture can be adjusted in this
item.
Fine Tune: Adjust phase to the best effect suiting for VGAsignal.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjust menu
In VGA and DVI input mode, H-Position and V-Position can be adjusted to eliminate
transverse line interference.
Multiple picture position setting
(Continue)
PC setting
1 Press CH+/- buttons to
select RGB, then press VOL-
/+ buttons to enter the sub
menu.
Display Mode
Adjust
Normal
RGB
Default
Auto Sync.
Color Temperature Normal
Black Stretch
On
2 Press CH+/- buttons to
select the desired item, press
VOL+/- button to adjust.
A
B
C
0
0
0
Red
RGB is opted for adjustment
of the numerical value of red,
green and blue in VGA/DVI
mode.
Green
Blue
A
B
C
Default
This is opted for adjustment of parameters to delivery setup
in VGA mode.(Afterthe operation, complete will be on the
right of the operation)
Repeat step 1and 2 toset the Default.
Auto Sync
This is opted for adjustment of picture location requency and
phase parameters in VGAmode.(After the operation, complete
will be on the right of the operation)
NOTE As the frequency of
display differ in PC device
In VGA , if no signal input, the Auto Syncwill be no adjustable.
you may select the appropriate
frequency to obtain desired effect.
If the signal of receive is excess,
the picture can be not displayed
or wrong on the screen.
Repeat step 1and 2 toset the Auto Sync.
Note
Recommendatory frequency as follow:
H-frequency V-frequency
Sequence
frequency
Remark
KHz
Hz
60
60
60
31.5
DOS
VESA
VESA
37.88
48.36
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Others functions
Program Edit Scan Nicam and display functions
NICAM
Press the I/II button will result in fast swap of NICAM
function of current program.
Display function
Press the DISPLAY button, then
3
the channel number and system
AUTO
B/G
DISPLAY
will be displayed on the screen.
Press the DISPLAY button again,
it is disappear.
Scan
1 If you want to select a desirable program, you may
Scan
scan all the TV programs in memory. You can simply
press SCAN button to do this. Press scan button once,
there are nice pictures on the screen, press Scan button
again, there are sixteen pictures on the screen to scan.
2 If you want to stop the function during auto tunning,
simply press SCAN button again.
Sleep
The TV set will switch automatically to standby at the
preset time with the SLEEP time on. You may set the
sleep time.
Sleep
each press ofSLEEP button repeatedly onthe remote
control to selectthe number ofpreset minutes, thetimer will
be set insequence: (0min, 5min, 15min, 30min,60min,
90min, 120min).
After the sleeptime is programmed, the display willappear
briefly every tenminutes to remindyou that thesleep timer
is operating.
To confirm the sleeptimer setting, pressSLEEP and the
remaining time willbe displayed fora few seconds.
To cancel the sleeptimer, pressSLEEP repeatedly until the
display turns to0 min.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Stream media broadcast system
Stream media play prepare
1. Supporting equipment
are used for internal files. This
television can only play some AVI
and MPG files of this format. Those
files with suffix of dat are not movie
files, but data files used by
computers, and cannot be played
for movies.
5.External card reader supports
most digital cards available in the
market. Readable digital cards are
classified according to the property
of card readers and can be
connected to mobile hard disks
(working voltage 5.0V, working
current notover 500mA).
6. Some time the television
operation may be halted due to
excessive rate of information code
errors. In such case, restart the
s y s t e m . A s t h e r e a r e m a n y
nonstandard USB mobile devices in
the market. If this kind of USB mobile
devices are used in the stream
media play system, the problem of
identification failure might occur.
The same problem may also
happen with computers, not
televisions.
1.Equipment supporting Mass and
Storage agreements include USB,
mobile hard disk, card reader, some
MP3 anddigital camera.
2 . E q u i p m e n t s u p p o r t i n g P T P
agreement includes some digital
camera.
2. 1 Supporting media:
picture, music, MPEG4, MPEG2
and MPEG1;
Supporting file format
*.Avi, *.DIVX, *.MPEG,*.DAT, *.MP3,
*.WHA, *.JPG and *.JPEG. Due to
particularity of filecode andfile mode,
It is possible that somefiles cannot be
read.
2 If Pic & Music mode is activated,
relative media fileformat will include
JPEG and MP3 files. After Picture is
selected, MP3 files set for play will
open both music and picture files for
sync play performance. As some files
must be read while music is being
played, the speed of picture
operation response might be
affected.
3.Before starting operation, verify USB
storage device is of FAT32 and FAT file
system format. At present, this
television does not support NTFS and
the filesystems of otherformat.
4.Many moviefiles usesuffix ofAVI and
MPG. However, many kinds of format
7.It is suggested that the external
devices with USB2.0 interface be
used to improve velocity of
information reading and continuity
of information play.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Stream media broadcast system
Stream media system setup
Note: Memory cards or USB devices are not
supplied with this TV.
USB setup
1 Insert USB in the card slots at the right side the TV.
AAA Multimedia Player
2 Insert it to be clicked in.
3 Press USB button on the remote controller to enter
the stream media system.
Card
USB
File copy
SETUP
CARD setup
This TV is Compatible with the card of SD/MMC/CF/MS/SM
format.
Remove USB
Press ENTER key to play this devices
How to use
1
Jack of cardInstructions
Note
Jack of SM card
1.Please note chooses uses
the digital memory cardwith
you corresponds the receptacle
2.Card reader in1 cannot
simultaneously insert two kind
of cards inthe graphical
representation position
Jacks of SD MMC MS card
Jack 1
Jack 2
Jack of CFcard
2
Insert the cardas right direction. As followingCard in commonuse
card
1
CF card
jack
3
MS card
jack
2
MMC card
jack
4
SM card
jack
jack
MULTIMEDIA
CARD
COMPACT FLASH
DIGITAL MEMORY CARD
128
SD
128MB
ID 128MB
128
Note:
1.the card insertion time, after the flows mediasystem starts 2s , insert the card
to numerical code card reader , do not bringcard to start flow media system.
2. After cardinsertion, indicator light will shines, and enters glitters condition,
after period oftime , indicator light enters constant bright condition, indicates
already distinguishes finished, this time carries on playoperation and soon .
3, In the market ,the digital card typeare very many, please uses standard
product of thestandard factory , meetsreads takes difficult or readsspeed
limits, please replaces the digitalcard.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Stream media broadcast system
Removing USB device
1 Press Up or DOWN to select Remove USB,
and press ENTER button to ensure it.
2 press EXIT button to exit menu.
3 Remove the memory card/USB device.
AAA Multimedia Player
Card
USB
File copy
4 If to remove the card device, press EXIT
button to return to the main menu, and
remove the card.
SETUP
Remove USB
Press ENTER key to remove USB devices
Card data protection
- Do not remove the card/USB device when the content is being read or when
browsing. Such action may damage the memory card/USB device.
- Do not touch the terminals on the back of the card.
- Always insert a card in the correct direction. Failure to do so may result in
damage to the card and the unit.
- Do not subject the card to excessive pressure or strong impacts.
- Malfunctions of the unit or card may result in data loss or damage to the card.
- Haier shall not accept any liability for damage or loss of stored data.
Warning:
Memory cards can be swallowed
by young children. Do not allow
children to handle memory cards.
Please remove the memory card
immediately after use.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Stream media broadcast system
To start the media play
1. Press USB button to enter media play system.
2. Press Up or DOWN button
to select the desired option.
AAA Multimedia Player
Card
3. Press ENTER button to
enter desired option.
USB
File copy
SETUP
Remove USB
4. Press EXIT to return the
previous menu.
Press ENTER key to play this devices
5. If to exit USB system, you need to return to the main
menu to protection card data..
Color.SYS
Edit
Sound.SYS
Time.Skip
Note: If thereare no operationtwo minute later, the
TV will enterthe saver automatically, at thetime, press
any button ofUSB system toexit the savermenu.
Scan
Swap
Shuttle
PIP
Zoom/Move
Sleep
USB
Left/Prev
UP
Right/Next
REV
EXIT
DOWN
Pause
Enter
ZOOM
HELP
To operate the menu
1. Press Up or DOWN to select the item with up or down.
2 Press LEFT or RIGHT to select the desired item of
submenu with left or right.
3
Press ENTER
button to ensure the desired option to
enter the submenu to resume the speed of standard.
4. Press FWD or REV
slowly.
button to operateplay quickly or
5.Press PAUSE button to make the programstop and press
again to resume it.
6.Press ZOOM button to make zoom, and press Left/Right
or UP/DOWN buttonto enjoy the detail.
7
Press HELP button to call up or exitthe OSD information.
And press HELPbutton to call up or exitthe OSD during
operating file copy.
8 press EXIT button to return to previous menu and stop play,
press EXIT button repeatedly to returnto main menu.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Stream media broadcast system
To select stream media broadcast system
1.Press Up or DOWN button
to select "card"or"USB".
AAA Multimedia Player
(The device be inserted
and identified).
Card
USB
File copy
2. Press ENTER button to
enter adjusted option.
SETUP
Remove USB
Press ENTER key to play this devices
To play picture
AAA Multimedia Player
1. Press Up or DOWN
button to select Picture item.
Picture
2. Press ENTER
enter the menu of play.
button to
Movie
Music
Color.SYS
Edit
Sound.SYS
Time.Skip
Music and PIC
3. Press again Up or DOWN
button to select desired
enjoy picture, and then
Scan
Swap
Shuttle
PIP
Zoom/Move
Sleep
USB
Left/Prev
UP
Right/Next
REV
EXIT
DOWN
Pause
press ENTER
the play menu.
button to enter
AAA Multimedia Player
Enter
ZOOM
HELP
4. On screen display, Press Up
or DOWN to select the speed
of play.(Normal, slow, fast).
F-007 .JPG
F-008 .JPG
F-009 .JPG
F-010 .JPG
F-011 .JPG
F-012 .JPG
5. Press LEFT or RIGHT
button to swap the picture of
next and previous.
Play
Press EXIT button to return.
JPEG
0016.JPG
Slideshow speed standard
IMAGE
Note:
the play file menu are
different with your USB
devices.
To enjoy the picture detail
1. After selecting the picture to play, press ZOOM to
select desired zoom.
2. Press HELP button to exit the display, and then
press Up or DOWN or LEFT or RIGHT
enjoy the picture detail.
to move and
To make the picture overturn
Each press of FWD button to make overturn 900 with right,
press ENTER
button to resume the program playing.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Stream media broadcast system
To enjoy music
1. Press UP/DOWN button
to select "Music" option.
AAA Multimedia Player
2. Press ENTER button to enter
play menu.
Picture
Movie
Music
Music and PIC
3. Press UP/DOWN button to
select desired music, and
then press ENTER button to
play music.
AAA Multimedia Player
Note: the play filemenu are
different with yourUSB device.
The day went away .MP3
4. When playing music,
press UP/DOWN toselect
play mode, (play mode:
standard, program, Random;
Repeat mode: Disc Repeat,
Folder Repeat, File Repeat)
and press ENTERbutton to
ensure the mode.
Color.SYS
Edit
Sound.SYS
Time.Skip
Scan
Swap
Shuttle
PIP
Zoom/Move
Sleep
USB
Left/Prev
UP
The day you wentaway.MP3
Play mode standard
Right/Next
REV
EXIT
DOWN
Pause
Enter
ZOOM
HELP
5. When playing music, press
or button to swapthe
next and previousmusic
01 07 / 04 20
6. Press EXIT button to exit
the playing.
Note: 1. DISC Repeat mode: press UP/DOWNbutton,
the DISC Repeat will appearon the screen, and then
press ENTER to ensure it.
2. Program mode:
press UP/DOWN buttonto
The day went .MP3
Soft .MP3
select the music in left list,
and press ENTERbutton to
program in turn, and then
the DISC Repeat will appear
on the screen, and then
Soft .MP3
The day went .MP3
Done
press button to select
"Done", and thenpress
ENTER button to ensure it.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Stream media broadcast system
To play Movie
1. Press UP/DOWN button to
select "Movie" option.
AAA Multimedia Player
2. Press ENTER to enter play
menu.
Picture
Movie
Music
3. Press again UP/DOWN
button to select desired
music, and press again
ENTER button to play it.
Music and PIC
AAA Multimedia Player
4. On screen display, press
or
turn:
button to selectin
E08-8SOBTILES-1
File-Play Back Control-Auto
channel-Play Mode
Color.SYS
Edit
Sound.SYS
Time.Skip
Scan
Swap
Shuttle
PIP
Zoom/Move
Sleep
USB
5. Press FWD or REV button
to set speed, press ENTER button
to resume to standard mode.
Left/Prev
UP
Right/Next
REV
EXIT
DOWN
Pause
Enter
ZOOM
HELP
6. Press
or
button to
select the next movie or
previous.
7. Press EXIT button repeatedly
to return.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Stream media broadcast system
To select the Music and PIC item
1. Press UP/DOWN button
to select "Music and PIC"
option, and press ENTER
AAA Multimedia Player
button to enter menu.
Picture
2. Press UP/DOWN to select
desired file, and press
Movie
Music
button to ensure it.
(
Music and PIC
to cancel). Repeat step
2 to select more file, and
press ENTER button to enter
play menu.
AAA Multimedia Player
3. On screen displaymenu,
press UP/DOWN toselect the
speed to play.( Normal,
slow, fast).
F-007 .JPG
F-008 .JPG
F-009 .JPG
F-010 .JPG
F-011 .JPG
F-012 .JPG
Color.SYS
Edit
Sound.SYS
Time.Skip
Scan
Swap
Shuttle
PIP
Zoom/Move
Sleep
USB
Left/Prev
UP
Right/Next
REV
EXIT
DOWN
Pause
Enter
ZOOM
HELP
4. Press FWD or REV button
to swap thenext and previous
picture, press LEFT or RINGHT
button to select the music.
Play
JPEG
0016.JPG
MP3
The day you went away .MP3
00 01:43
Play mode standard
IMAGE
Note: press PAUSE button to
stop playing the picture.
5. Press repeatedly EXIT button
to return.
Note: on themusic and picture, the playingmusic
is *.mp3 format.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Stream media broadcast system
Copy file function
1. Press UP/DOWN to select
"File Copy" item.
AAA Multimedia Player
2. Press ENTER button to enter
the copy menu.
Card
USB
File copy
SETUP
3. Press ENTER button to
enter the file menu, and
press UP/DOWN buttonto
select "Card" or"USB"
Remove USB
Press ENTER key to enter COPY menu
Select source Port:
Card
USB
4. Press ENTER button to enter
card or USB, and select the
files to copy, then press
Color.SYS
Edit
Sound.SYS
Time.Skip
Root
HELP button tocall up COPY
and PASTE, and then press
UP/DOWN button toselect
COPY, and press ENTERbutton
to confirm, press again
Scan
Swap
Shuttle
F-007 .JPG
F-008 .JPG
F-009 .JPG
F-010 .JPG
F-011 .JPG
F-012 .JPG
PIP
Zoom/Move
Sleep
USB
Left/Prev
UP
Right/Next
REV
EXIT
DOWN
Pause
Enter
ZOOM
HELP
UP/DOWN button toselect
PASTE, then press
ENTER button to paste, in this
time, the File already exits,
overwrite it
will appears
on the screen, and press
LEFT/RIGHT button to select
YES/NO, and then press
ENTER button to confirm.
COPY
PASTE
Root
F-007 .JPG
F-008 .JPG
F-009 .JPG
F-010 .JPG
F-011 .JPG
F-012 .JPG
5. Press ENTER to cancel.
Note:
RIGHT button to select
the all files;
LEFT button tocancel.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Stream media broadcast system
To select language
1. Press UP/DOWN to select
"SETUP " item.
AAA Multimedia Player
Card
2. Press ENTER button to enter
the SETUP menu,
USB
File copy
SETUP
Remove USB
3.and press again ENTER
button to enter language
option.
Press ENTER button to SETUP menu
AAA Multimedia Player
4. Press UP/DOWN to select
desired language, and
press ENTER to ensure it.
Languages
Version
5. Press EXIT button to return.
Color.SYS
Edit
Sound.SYS
Time.Skip
Scan
Swap
Shuttle
PIP
Zoom/Move
Sleep
USB
Left/Prev
UP
Right/Next
REV
EXIT
DOWN
Pause
Enter
ZOOM
HELP
To display the version
1. Repeat steps 1-2, and
then press UP/DOWN to
select version.
AAA Multimedia Player
2. Press ENTER button to
display the version number.
V2.1.04252
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications and functions
Picture proportions 4:3/wide screen: (3 modes)
Panorama picture: 16:9
Picture element: 1366 768
Multi-input compatibility
Advanced technology for motion picture processing
Two speakers/optional
Complex component: RCA-pin
Component video signal: YUV
3
1
S terminal: Mini DIN 4-pin
1
RGB input: D-sub 15-pin 1 (480i/p, 720p, 1080i, 1080p)
Audio input: RCA-pin TYPE (L/R) 4: full support
separate audio frequency input
Audio system: stereo
Control port: RS-232 D-sub 9-pin
1
Size: WxDxH unit: 1270mmX380mmX788mm
stand and speaker included
Working conditions
Power: 150V-240V, 50/60Hz
Power consumption: 240W
Temperature
Working: 0
35
Storage: -25
45
Humidity
Working: 20 80% Storage: 5 90%
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
- Early malfunctions can be prevented. Careful and regular cleaning can
extend the amount of time you will have your new TV. Be sure to turn the power
off and unplug the power cord before you begin any cleaning.
Cleaning the Screen
1. Here`s agreat way tokeep the dust off yourscreen for awhile. Wet a softcloth in a
mixture of lukewarm water anda little fabricsoftener or dishwashing detergent. Wring
the cloth untilit`s almost dry, and thenuse it towipe the screen.
2. Make sure the excesswater is offthe screen, and then letit air-dry before you turn on
your TV.
Cleaning the Cabinet
To remove dirt or dust, wipe the cabinet with asoft, dry, lint-free cloth. Please be sure
not to use a wet cloth.
Extended Absence
If you expectto leave yourTV dormant fora long time (such as a vacation), it`s a good
idea to unplug the power cordto protect againstpossible damage fromlightning or
power surges.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
For the sake of time and cost, it is strongly recommended that you check out
the problem byyourself according tothe instructions listedhereunder before
contacting the after-sales service for technical assistance.
Problem
Possible remedies
Turn on the power supply;
No picture,
no sound
Properly plug the TV set to the power socket;
Check to see if the power cable of other appliance is
plugged in the TV set. Make sure that the power cable
of the TV set is properly connected.
Good picture,
no sound
Depress the volume button;
Check out the audio frequency input signals.
Check to see if the remote controller display
receiving window are blocked by other objects and
if batteries are properly loaded.
Failure of remote
controller
Designate the item of color from the Picture menu
and depress the volume button;
No color, weak
color or poor picture
Keep the display and VCR separate a reasonable space;
Activate some functions to store picture brightness;
Make sure that the display and signal source are
available and turned on.
Excessive brightness
or darkness
Adjust brightness or contrast.
Picture too big or small
One speaker failure
Adjust the setup of sizes.
Balance the sound in the menu.
It is a normal phenomenon.
Slight sound from display
Note: Do not leave the television with static picture in an extended period as it may
result in residual image on your television screen.
Note: Production of the screen requires high and precision technologies. However,
there might be some dark or bright (red, blue or green) spots, or some anomalistic stripes or
spots. This is not defect. If the TV set is used in an area 2,400 meters above the sea level where
the air pressure is below 750hpa, the picture on the screen may be affected and a muffled sound
might be produced. These phenomena might happen in the area 1,500 meters above the sea
level. This is resulted from difference between air pressures inside and outside the display. This
is not a defect covered by the limited warranty.
NOTE
Design and specifications are subject to change without notice.
The dimension in this manual is a approximation.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|