PLASMA TV
OWNER`S MANUAL
MODELS: P50V6-A8
Please READ this manual carefully before
operating your TV, and retain it for future
reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
Important safeguards for you and your new product
Your product has been manufactured and tested with your safety in mind. However, improper
use can result in electrical shock or fire hazards. To avoid defeating the safeguards that have
been built into your new product, please read and observe the following safety points when
installing and using your new product, and save them for future reference.
1. Retain these Instructions ---the safety and operating instructions should be retained for
Future reference.
2. Heed Warnings ---All warning on the appliance and in the operating instructions should be
followed.
3.Cleaning --- Unplug from the wall outlet before cleaning. Do not use liquid cleaners or
Aerosol cleaners. Use only dry cloth for cleaning.
4. Attachments ---do not use attachments
not recommended by the manufacturer as they may cause Hazards.
5. Water and moisture -- do not place this product near water, for example, near a bathtub,
wash bowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool.
6. Do not place this unit on an unstable cart, stand, tripod, bracket, or table. Use
only with a cart, stand, tripod, bracket, or table recommend by the manufacture, or sold with
the unit.
7. Ventilation ---Slots and openings in the cabinets and the back or bottom are provided for
Ventilation and to ensure reliable operation of the product and to protect it from overheating,
and these openings must not be blocked or covered. The openings should never be
blocked by placing the product on a bed, sofa, rug, or other similar surface. This product
should not be placed in a built-in installation such as a bookcase or rack unless proper
ventilation is provided or the manufacturer`s instructions have been adhered to.
8. Power Source ---this unit should be operated only from the type of power source indicated on
the rating label. If you are not sure of the type of power supply to your home, consult your
Appliance dealer or local power company.
9. Grounding or polarization ---Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and a third grounding prong. The wide blade or the third
prong are provided for your safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet. To prevent electric shock, ensure the
Grounding pin on the AC cord power plug is securely connected.
10. Power cord protection ---Power supply cords should be routed so that they are not likely to
Be walked on or pinched by items placed upon or against them. Pay particular attention to
cords or plugs, convenience receptacle, and the point where they exit from the appliance.
11. Lighting precaution ---for added protection for this product during a lighting storm or when
it is left unattended for long period of time, unplug it from the wall outlet and disconnect the
antenna or cable system. This will prevent damage to the product due to lighting and
power line surges.
12. Never push objects of any kind into this product through openings as they may touch
dangerous voltage point or short out parts that could result in a fire or electric shock. Avoid
spilling liquid of any kind on the product.
13. Servicing ---do not attempt to service the product by yourself, as opening or removing
covers may expose you to dangerous voltage or other hazards. Refer all servicing to
authorized service personnel.
14.Damage Requiring Service ---Unplug this unit from the wall outlet and refer servicing to
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
qualified service personnel under the Following conditions:
a. When the power supply cord or plug is damaged or frayed.
b. If liquid has been spilled, or objects have been fallen into the unit.
c. If the unit has been exposed to rain or water.
D. If the unit does not operate normally by following the operating instructions. Adjust only
those controls that are covered by the operating instructions, as improper adjustment of
other controls may result in damage and will often require extensive work by a qualified
technician to restore the unit to its normal operation.
E. If the unit has been dropped or damaged in any way.
F. When the unit exhibits a distinct change in performance; this indicates a need for service.
15.Heat --- The product should be situated away heat source such as radiators, heat registers,
stoves, or other products (Including amplifiers) that product heat.
16.Overloading ---Do not overload wall outlets and extension cord as this can result in a risk of
Fire or Electric shock.
17. Outdoor antenna grounding---If an outside antenna or cable system is connected to
the unit, be sure the antenna or cable system is grounded to provide some protection
against voltage surges and built-up static charges, Section 810 of the National Electrical
Code, ANSI/NFPA 70, provides information with respect to proper grounding of the mast and
supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of
grounding conductors, location of antenna discharge unit, connection to grounding
electrodes, and requirements for the grounding electrode.
GROUND CLAMP
ANTENNA LEAD IN WIRE
ANTENNA DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
ELECTRIC SERVICE EQUIPMENT
POWER SERVICE GROUNDING ELECTRODE SYSTEM
(NEC ART 250, PART H)
Note: The PDP Manufacturing Process: afew minute coloreddots may be
present on thePDP screen
The PDP (Plasma Display Panel), which is thedisplay device ofthis
product is composedof 0.9 to2.2 million cells. A few cell defectswill normally
occur in thePDP manufacturing process. Several tiny, minute coloreddots
visible on thescreen should beacceptable. This alsooccurs in otherPDP
manufacturers' products. Thetiny dots appearingdoes not meanthat this
PDP is defective. Thus afew cell defectsare not sufficientcause for thePDP
to be exchangedor returned. Ourproduction technology minimizesthese cell
defects during themanufacture and operationof this product.
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Warning ............................................1
Important Safety Instructions...............2
buttons and interfacelocation.............5
Front control panel...........................5
Rear control panel............................6
Installation Instructions ......................7
Remote controller...............................8
Keys of remotecontroller.....................9
Function introduction .......................9
Effective range ..............................10
External Equipment Connections.......11
Operation
Set up yourTV..................................16
Switching ON/OFF theTV set..........16
Choose the MenuLanguage...........16
Select input modes..........................17
Tuning menu....................................18
Automatic search...........................18
Program Table ....... ......................19
Manual search..............................20
Fine Tuning...................................21
How to selectthe desired program.....22
Edit Name.....................................23
Skip..............................................24
Program swap...............................24
Picture menu ...................................25
How to selectpicture modes............25
Noise Reduction .....................................26
Sound menu..............................................27
To choose soundmodes ..........................27
Balance..................................................27
Setting Five Equalizersound ...................28
Setting the surroundsound ......................28
Setting theAuto Volume...........................29
How to eliminatesound ...........................29
Timer menu...............................................30
Timer setting..........................................30
On/off time\Timeron Prog\Timer Prog ......31
Function menu..........................................32
Function setup .......................................32
Adjust menu .............................................34
To choose pictureaspect ratio..................34
H-Position and V-Position adjust ..............35
RGB/Default/Auto Sync ..........................36
Color Temperature .................................36
Black Stretch .........................................36
Lock setup................................................37
Other functions.........................................40
Teletextfunctions......................................42
Maintenance.............................................44
Specifications and functions.......................45
Troubleshooting........................................46
Accessories
MUTE
STILL
SCAN
SLEEP
PIP
DISPLAY
ABC@
DEF
GHI$
JKL%
MNO
POR&
STUV
*#()
WXYZ
TV/AV
SWAP
P.STD
S.STD
CH+
MENU
CH-
VOL-
VOL+
H.LOCK
EXIT
CH.LIST
T
I
M
E
R
Z
O
O
M
Bracket
4
Power cable
User's manual
Alkaline battery(AA)
2
Remote controller
Download from Www.Somanuals.com. All Manuals Search And Download.
Buttons and interface location
-This is a simplified representation of front panel.
-Here shown maybe somewhat different from yourTV.
Front control panel
10
9
1
2
6
4
5
7
8
3
1.VIDEO input
2.L-AUDIO-R left and rightaudio input.
3. EXIT: clears all on-screen displays and returns to TV viewing from any menu.
4. INPUT: Source inputselect
5.CH- /CH+: Programplus and minus, menu options.
6. VOL-/VOL+: Volume increaseand decrease, menureset and entry
7.MENU: Menu display
8.Power
9.Remote control signal receive window.
10. Remote Indicator
In red when standby mode, in blue when display.
Download from Www.Somanuals.com. All Manuals Search And Download.
Buttons and interface location
Rear Control panel
SCART2/SCART1 Input
DVD/DTV Input
(Component )
Connect Scart out from
an Scart device to the
Scart input.
Connect a component
video/audiodevice to
these jacks.
PC VIDEO Input
Connect the monitor
output connector from
a PC to the jack
Antenna Input
Connect cable or
antenna signals to
the TV, either directly
or through your
cable box.
VGA IN
COMPONENT IN
DVI IN
SWITCH
AC-INPUT
SCART2
SCART1
DVI
ANT IN
VGA
AUDIO
Pr/Cr
Pb/Cb
Y
L-AUDIO-R
AUDIO
DVI Input
Earphone jack:
Connect the monitor
output connector from
a PC to the appropriate
input port.
Power Cord Socket
This TV operates on
AC power.
Earphone audio output
terminal.
The voltage is indicated
on the specifications page.
Never attempt to operate the
TV on DC power
Audio input
Audio input
for linking PC audio
frequency output terminals.
for linking DVI audio
frequency output terminals.
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation Instructions
- The TV can be installed in various ways such as on a wall, or on a desktop etc.
- The TV is designed to be mounted horizontally.
GROUNDING
Ensure that youconnect the earthground
wire to preventpossible electric shock. If
grounding methods arenot possible, havea
qualified electrician installa separate circuit
breaker. Donot try toground the unitby
connecting it totelephone wires, lightening
rods, or gaspipes.
Power
Supply
Short-circuit
Breaker
Desktop Pedestal Installation
Wall Mount: Horizontal installation
For proper ventilation, allow a clearance
of 4" on each sideand the top, 2.36" on
the bottom, and2" from the wall. Detailed
installation instructions areincluded in
the optional DesktopStand Installation.
For proper ventilation, allow a clearanceof
4" on each sideand 2" from the wall.
Detailed installation instructionsare
available from yourdealer, seethe
optional Wall Mounting Bracket Installation.
2 inches
2 inches
4 inches
4 inches
4 inches
4 inches
4 inches
4 inches
2.36 inches
4 inches
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote controller
Inserting Batteries
1.Slide open the
cover of thebattery
compartment on the
back of theremote
controller.
2.Load twoAA alkaline
3.Replace the coverof the
battery compartment.
batteries in thecompartment.
paying attention tothe polarity
diagram in thebattery
compartment.(plus and minus
poles to respectivemark)
Precautions
Make sure thattwo AAalkaline batteries
are loaded. The batteries mustbe of the
same type. The batteries mustbe located
properly. The batteries are not
rechargeable.
As strong lightmay interfere the
signals, change yourposition to
operate the remotecontroller if
the television cannotbe turned
on or off as youexpect.
Make sure thatthere is noobstacle between
the remote controllerand television set.
Keep the remotecontroller away from
heat source orhumid area toensure
effective performance of the remote
controller.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Keys of remote controller
- The remote controller cannotbe operated unlessthe batteries areproperly loaded.
- When using the remote control, aim it at the remote control sensor on the TV.
Function introduction
STILL
Picture static
I/II (NICAM)
PIP(No available)
SlEEP
Displaying sleep time,
adjustable
Power OFF/Standby
any other programmed
equipment off.
MUTE
SCAN
STILL
MUTE
Switches the sound on or off
DISPLAY
SLEEP
PIP
SCAN
Program scan button
DISPLAY
Display ON/OFF
ABC@
DEF
Digits
GHI$
MNO
JKL%
Program direct option(when edit
program, every press can set
different sign byturns among the
digits and signon top ofthem)
TV/AV
Input source display
POR&
STUV
*#()
WXYZ
P.STD
(Picture mode option)
TV/AV
SWAP
SWAP
Switch the currentchannel to the
last channel youhave viewed.
P.STD
S.STD
sound increase
and decrease
CH+
MENU
CH-
S.STD
(Sound mode option)
VOL-
VOL+
Program up and down
Or turns yourTV
MENU
main menu entry, menu exit or
return to next higher level menu.
Teletext buttons
buttons which have letters
on top alsocan use in TV.
Lock button
H.LOCK
EXIT
(enter the Lock Set menu)
CH.LIST
TIMER ZOOM
EXIT
clears all on-screendisplays and
returns to TVviewing from anymenu.
Channel list button
Timer
Time display(only when
there is teletext in TV)
ZOOM
Adjust picture aspectratio
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote controller
Effective range
above
20
20
below
right
front 8m
45
45
left
DISPLAY
FA
V
.
POWER
-/--/---
Q.VIEW
SLEEP
USB
PSM
SSM
TV/AV
MUTE
CH+
VOL-
MENU
CH-
VOL+
UP
LEFT
DOWN
PREV.
NEXT
H.LOCK
PAUSE
ENTER
EXIT
SWAP
Ensure the remote controller is pointed toward the remote
controller window on the display.
No obstacle should be placed between the remote controller and
the remote controller window.
The effective receiving scope for the signal is 8 meters to the
front of the remote controller windows, and 45O to the left or right
side and 20O above or below the control window.
Use of remote controller:
1. To ensure a normal operation, the remote controller should not
be dropped or damaged in any way .
It should alsobe kept dryand away fromall heat sources.
2. Battery replacement is necessary when the remote controller
acts inconsistently or stops operating the plasma display.
Download from Www.Somanuals.com. All Manuals Search And Download.
External Equipment Connections
Antenna Connection
Generally speaking, to enjoy a clearer picture, we recommend that you use a
CATV system or an outdoor antenna .In different places, the suitable antenna
type and position are different.
outdoor
antenna
Mixer
additional
purchase
Antenna input
75 standard
coaxial type
ANT IN
75 coaxial cable
300 twin-lead cable
Plug
(additional purchase)
Antenna adapter
Note
* It isrecommended that you'dbetter use 75 coaxial cable toremove the
disturbance caused byairwave.
* Don't bindantenna cable andelectric wire together.
If the antennaneeds to besplit for twoTv`s, install a
2-WaySignal Splitter in the connections.
If the antennais not installedproperly, contact your
dealer for assistance.
To improve picture quality ina poor signalarea,
purchase and installa signal amplifier.
Download from Www.Somanuals.com. All Manuals Search And Download.
External Equipment Connection
NOTE: All cables shown are not included with the TV.
Choose Your Connection
There are severalways to connectyour television, dependingon the componentsyou
want to connectand the qualityof the signalyou want toachieve. The following are
examples of someways to connectyour TV.
Choose the connectionwhich is bestfor you.
VCR connection
- To avoid picturenoise (interference), leavean adequate distancebetween the VCR
And TV.
1. Connect the SCART cables from
the VCR's outputjacks to theTV`s
input jacks, asshown in thefigure.
COMPONENT IN
2. Insert a videotape into theVCR and
SCART2
SCART1
ANT I
Pr/Cr
Pb/Cb
Y
L-AUDIO-R
press PLAY on the VCR. (Referto the VCR
owner`s manual.)
3. Select theinput source
by the TV/AV button
on the remotecontrol.
S-VIDEO
Download from Www.Somanuals.com. All Manuals Search And Download.
External Equipment Connections
DVD connection
How toconnect
1. Connect the DVD video outputs (Y,
Pb/Cb, Pr/Cr) tothe COMPONENTIN jacks
on the TV and connect the DVD audio
outputs to theAUDIO IN jacks on the TV, as
COMPONENT IN
shown in thefigure.
2. If your DVD only has an SCART output
SCART2
SCART1
ANT IN
Pr/Cr
Pb/Cb
Y
L-AUDIO-R
jack, connect this to the SCART input on
the TV. as shown in thefigure.
NOTE: If your DVD player does not have
component video output,use S-Video.
How touse
1. Turn on the DVD player, insert a DVD.
2. Use the TV/AV button on the remote
control to selectSCART mode.
3. Press Play buttonon external equipment
for program play.
or
4. Refer to the DVD player's manual for
operating instructions.
DVD
DTV connection
-Towatch digitally broadcastprograms,
purchase and connecta digital set-top
box.
VGA IN
COMPONENT IN
DVI IN
How to connect
Use the TV`s COMPONENT IN, VGAor DVI
port for videoconnections, depending
on your set-topbox connections
available. Then, make the
corresponding audio connections.
How to use
DVI
VGA
AUDIO
Pr/Cr
Pb/Cb
Y
L-AUDIO-R
AUDIO
1. Turnon the digitalset-top box. (Refer
to the owner`s manual for thedigital
set-top box.)
2. Use TV/AV on the remotecontrol to
select DVI mode.
3.Press Play buttonon external
equipment for programplay.
or
or
RGB-DTV OUTPUT
R
AUDEO
L
DVI-DTV OUTPUT
R
AUDEO
L
R
AUDEO
Y
Pb
Pr
Digital Set-top Box
Download from Www.Somanuals.com. All Manuals Search And Download.
External Equipment Connections
PC connection
How toconnect
1. To get the best picture quality, adjust the PC
graphics card to(>1024x768),60Hz.
or DVI source.
4. Check theimage on yourTV.There may
be noise associated with the resolution,
vertical pattern, contrast or brightness in
PC mode. If noise is present, change the
PC mode to another resolution, change
the refresh rate to another rate or adjust
the brightness and contrast on the menu
until the pictureis clear.If the refreshrate
of the PCgraphic card cannot be changed,
change the PCgraphic card orconsult the
manufacturer of thePC graphic card.
NOTES:
2. Use the TV`s VGA IN or DVI (Digital Visual
Interface) IN port for video connections,
depending on yourPC connector.
If the graphic card on the PC does not output
analog and digitalRGB simultaneously, connect
only one ofeitherVGA IN or DVI INto display the
PC on theTV.
If the graphic card on the PC does output
analog and digital RGB simultaneously, set the
TV to either VGAor DVI; (the othermode is setto
Plug and Playautomatically by theTV.)
1 Use a DVIcable.
2 Avoid keeping afixed image onthe TV's
screen for along period oftime. The fixed
image may become permanently
imprinted on thescreen.
3 The synchronization input form for
Horizontal and Vertical frequencies is
separate.
3. Then, make the corresponding audio
connection. If usinga sound card,adjust the PC
sound as required.
How touse
1. Turnon the PCand theTV.
2. Turn on the display by pressing the POWER
button on theTV's remotecontrol.
3. Use TV/AV on the remote control to select
VGA
VGA IN
DVI IN
L
R
DVI
VGA
AUDIO
AUDIO
AUDIO OUT
Resolution
Line
frequency
(Khz)
Frame
frequency
(Hz)
Resolution
Mode
VGA
SVGA
XGA
640*480
800*600
1024*768
31.5KHz
37.9KHz
48.4KHz
60Hz
60Hz
60Hz
Note: All above listed are subject to VESA Criteria.
Download from Www.Somanuals.com. All Manuals Search And Download.
External Equipment Connections
Connecting Headphones
You can connect a set of headphones to your set if you wish to watch a
TV programme without disturbing the other people in the room.
Plug a set of headphones into the 3.5mm
mini-jack socket on the rear panel of the set.
Note
Prolonged use of headphones at a high volume
may damage your hearing.
ANT IN
You will not receive sound from the speakers
when you connect headphones to the system.
Power source
TO USE AC POWER SOURCE
Use theAC polarized linecord provided for
operation onAC. Insert theAC cordplug into
a standard polarizedAC outlet.
AC Outlet
Wider Hole
and Blade
NOTES:
Never connect theAC line cord plug toother
than the specifiedvoltage. Use the
attached power cordonly.
If the polarizedAC corddoes not fitinto a non-
polarized ACoutlet, do notattempt to fileor cut
the blade. Itis the user`sresponsibility to have
an electrician replacethe obsolete outlet.
If you causea static dischargewhen touching
the unit andthe unit failsto function, simply
unplug the unitfrom theAC outlet andplug it
back in. The unit shouldreturn to normaloperation.
Polarized AC Cord Plug
Download from Www.Somanuals.com. All Manuals Search And Download.
Set up your TV
-There are severaloptions you mightneed to setup in orderfor your TV to work
properly. Read the instructions that follow.
-In the manual, the OSD (on screen display) may be different from your TV`s, because
it is just an example to help you with the TV operation.
Switching ON/OFF the TV set
1 Please press down the power switch to
switch on AC power supply and the power
indicator willlight .
2If the indicatoris lighting inred, press CH+/-
or digital bu tton on the remote controller
again.(with theexception of0 digital)
1
2
6
4
5
7
8
3
3If youwant to exchangeto standing bystatus,
please press down button on the remote
controller.
4 Disconnect the power supply or unplug the
television if it is intended to completely cease
the television performance.
Choose the Menu Language
When you start using your set for the first time,
you must select the language which will be
used for displayingmenus and indications.
CH+
1 Press the MENU and then press the CH+/-
button to select the Function menu.
2 Press VOL+ to enter.
3 Press CH+/-button to select Language.
4 Select a particular language by pressing
VOL+/- button repeatedly.
VOL-
MENU
CH-
VOL+
You can choose oneof 13 languages.
5 When you are satisfied with your choice,
press the MENU button to return to normal
viewing.
Download from Www.Somanuals.com. All Manuals Search And Download.
Select input modes
Choose the input source
If you hope to enjoy the picture from the external
input source, before to select the source, you need
to connect thedevices, otherwise, whenyou select
the source, the none or no signal will appears on the
screen.
MUTE
SCAN
STILL
Source
Press INPUT or TV/AV button on
television or remote controller,
the menu appears on the screen.
Then press CH+/- to select the
TV item, and press VOL+ to
ensure it.
DISPLAY
SLEEP
PIP
ABC@
DEF
GHI$
JKL%
MNO
POR&
STUV
*#()
WXYZ
TV/AV
SWAP
P.STD
S.STD
CH+
MENU
CH-
TV: the inputsource fromANT IN terminal output.
SCART1: the input source from SCART1 terminal
output.
VOL-
VOL+
SCART2: the input source from SCART2 terminal
output.
AV: the input source from AV terminal output.
HDTV: the input source from YPbPr terminal output.
VGA: the input source from VGA IN terminal
output.
H.LOCK
EXIT
CH.LIST
TIMER ZOOM
DVI: the input source from DVI IN terminal
output.
Before watching TV program, you need to ensure
your TV in TV mode.
Memory function
When menu parameter is to be modified, the set
picture and sound status and preset program will
be remembers as menu exit.
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuning menu
This TV set has three methods to set channels, which are respectively full automatic,
manual search fine tune.
In this section, how to use the remote control to set channel is explained. You can
also use buttons on the TV set to set channel.
Full automatic search mode
Automatic search
1 Press MENU button and CH+/- button, the icon to
TUNING menu.
MUTE
SCAN
STILL
2 Press the VOL+/- buttons to enter submenu, and press
CH+/- button to select "country" first according to yourself
that means you have selected the sound system, this is
useful especially for France ), and then press CH+/-
button to select "Auto Search" item.
DISPLAY
SLEEP
PIP
ABC@
DEF
GHI$
JKL%
MNO
POR&
STUV
*#()
WXYZ
TV/AV
SWAP
P.STD
S.STD
CH+
MENU
CH-
MENU
VOL-
VOL+
PICTURE
Tuning Program
AUDIO
Country
England
ADJUST
TUNING
FUNCTION
TIMER
Auto Search
Program Table
H.LOCK
EXIT
CH.LIST
TIMER ZOOM
Note : the TUNING menu will be only operated in normal
TV mode.
3Press the VOL+/- button to ensure automatic search
with higher level.
Note:
If you have set Tuner Lock
in Lock Set menu. Password
must be entered when
VHF-L 188.16 MHz
operating menu tuning.
Otherwise there will be Tuner
Lock display on screen.
After the search has finished, all channels now playing
program will be automatically preset in order.
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuning menu
Program Table
1
Press MENU button and CH+/- button, the icon to
TUNING menu.
2
Press VOL+/- buttons to
MENU
enter submenu, and press
CH+/- button to select
"Program Table", press
VOL+ button to enter.
Or press CH.LIST button
on remote controller.
PICTURE
Tuning Program
Country
MUTE
SCAN
STILL
AUDIO
England
ADJUST
TUNING
FUNCTION
TIMER
Auto Search
Program Table
DISPLAY
SLEEP
PIP
ABC@
DEF
GHI$
JKL%
MNO
3
Press CH+/- button to
POR&
STUV
*#()
WXYZ
select the edited channel,
and press button
TV/AV
SWAP
Program Table
corresponding to edit.
001
002
003
004
005
006
007
008
009
010
P.STD
S.STD
(Red button: delete channel;
Green button: copy channel;
Yellow button: Name channel;
Blue button: Swap)
CH+
MENU
CH-
VOL-
VOL+
Red: Del; Green: copy; Yellow:Name; Blue: Swap
delete name
H.LOCK
EXIT
Press CH+/- toselect the channel, and press thered button
on the remotecontroller to delete, then press MENU button
to delect name.
CH.LIST
TIMER ZOOM
Copy channel
Press CH+/- toselect the channel, and press thegreen button
on the remotecontroller, thenpress CH+/- buttonto select
the channel tocopy, press again thegreen button thenpress
MENU button to ensure.
Name channel
Press CH+/- toselect the channel, and press theyellow button
on the remotecontroller, andpress the yellowbutton to display
the digital andletter list, pressVol+/- orCH+/- to selectthe
desired digital orletter, pressthe yellow buttonto exit list,
then press MENU button to ensure.
Swap channel
Press CH+/- toselect the channel, and press theblue button
on the remotecontroller, thenpress CH+/- buttonto select
the channel toswap, then pressagain the blue button to
ensure.
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuning menu
Manual search
If excessive channel signals of unwanted programs
are received in local area, manual search function is
recommended.
1 Press CH+/- buttons or the NUMBER 0-9 button to
choose desired searching frequency.
(regard channel 18 as example).
MUTE
SCAN
STILL
DISPLAY
SLEEP
PIP
ABC@
DEF
GHI$
JKL%
MNO
2 After calling up the
TUNING menu, press
POR&
STUV
*#()
WXYZ
MENU
CH+/- button
PICTURE
TV/AV
SWAP
Tuning Program
AUDIO
to select "Tuning
Program" item.
Country
England
ADJUST
TUNING
FUNCTION
TIMER
P.STD
S.STD
Auto Search
Program Table
CH+
MENU
CH-
VOL-
VOL+
MENU
3 Press CH+/- toselect
Manual Search item,
Press VOL+ buttonto
enter the desired
frequency and press
the digital button to
adjust.
H.LOCK
EXIT
PICTURE
AUDIO
Tuning Program
18
C 28
Program Number
CH.LIST
TIMER ZOOM
ADJUST
TUNING
FUNCTION
TIMER
Edit Name
AUTO
D/K
Color System
Sound System
Manual Search
Fine Tuning
Skip
62.25MHz
Off
4 Press the MENU button on thetelevision or remote
controller to return to preset menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuning menu
Fine Tuning
If the picture and/or sound are poor, try using the FINE
TUNING feature. Do not use this feature unless reception
is poor.
1 Press CH+/- buttons or
NUMBER 0-9 button to
18
c 28
AUTO
BG
MUTE
SCAN
STILL
DISPLAY
SLEEP
PIP
choose desired channels
ABC@
DEF
GHI$
JKL%
MNO
POR&
STUV
*#()
WXYZ
2 Press MENU button
and CH+/- button, till the
TV/AV
SWAP
P.STD
S.STD
TUNING menu shown on
MENU
CH+
MENU
CH-
the right display on the
PICTURE
screen.
Tuning Program
Country
AUDIO
VOL-
VOL+
England
ADJUST
TUNING
FUNCTION
TIMER
Auto Search
Program Table
3 Press VOL+ buttons
to enter submenu, and
press CH+/-button
to select Tuning Program
item, and then press
VOL+ to next submenu,
and press CH+/-button
again to make the
H.LOCK
EXIT
CH.LIST
TIMER ZOOM
MENU
PICTURE
AUDIO
Tuning Program
18
C 28
Program Number
ADJUST
TUNING
FUNCTION
TIMER
Edit Name
Color System
Sound System
icon to Fine Tuning.
AUTO
D/K
62.25MHz
Manual Search
Fine Tuning
Skip
Off
4 Press VOL-/+ buttons
all through to carry out fine
tune, till the best picture and sound are obtained, then
loosen the button.
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuning menu
You can watch TV program in a presetting channel.
How to select the desired program
1 Using "Program number" buttons
Press digit button to select the program.
If 2-digit or 3-digit programs are selected , press
digit buttons you needed continuously within 3
seconds.
MUTE
SCAN
STILL
If selected channel program is set at Lock on mode
and no password has been entered after initiation of
the television, the screen will indicate require password
entry. If wrong password is entered, channel selection
will fail and previous program will still stay on the screen.
The program locking password can be modified in the
preset menu and previous password will be required.
DISPLAY
SLEEP
PIP
ABC@
DEF
GHI$
JKL%
MNO
POR&
STUV
*#()
WXYZ
TV/AV
SWAP
P.STD
S.STD
CH+
MENU
CH-
VOL-
VOL+
2 Using the CH+/- buttons.
Press the CH+button to selecta channel numberin
number increasing direction.
Press the CH-button to selecta channel numberin
number decreasing direction.
H.LOCK
EXIT
(Note: If Skip is ON on one channel, press CH+/- button,
the channel will not appear.)
CH.LIST
TIMER ZOOM
How to select the desired sound
Press the VOL-/+ buttons on the remote controller or
the front of the TV set to adjust the volume level.
The range is0~100. When thevolume buttons are
pressed the volume level is displayed automatically
on the TV screen.
Volume
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuning menu
If the colour of some channel is abnormal
Usually this shouldbe set inthe auto position.However if
the colour displayed on the screen are incorrect, you can
manually select thecorrect colour system.
MUTE
SCAN
STILL
Press the MENU CH+/-and
VOL+/- button, till the Tuning
DISPLAY
SLEEP
PIP
MENU
Program menu shown on the
right will display on the screen.
PICTURE
ABC@
DEF
Tuning Program
AUDIO
18
C 28
Program Number
ADJUST
TUNING
FUNCTION
TIMER
Edit Name
GHI$
JKL%
MNO
AUTO
D/K
Color System
Sound System
Manual Search
POR&
STUV
*#()
WXYZ
Fine Tuning
Skip
Off
TV/AV
SWAP
P.STD
S.STD
If picture color is abnormal
CH+
MENU
CH-
Press the CH+/-buttons to select "Color System", thenpress
the VOL-/+ buttons to select the correct color system. In
general, you canset it as"AUTO".
Press VOL+/- button to select AUTO, NTSC, PAL, SECAM,
PAL60and NTSC4.43 in turn.
VOL-
VOL+
If sound is abnormal
H.LOCK
EXIT
Press the CH+/-buttons to select "Sound System", thenpress
the VOL-/+ buttons to select the correct sound system. In
general, you canset it as"D/K".
CH.LIST
TIMER ZOOM
Press VOL+/- buttonto selectD/K, I, B/G,M, L and L in turn.
Edit Name
If current program is to be named, press VOL-/+
button to select position you want to change and
press digits to change, press MENU button to ensure it.
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuning menu
Skip
After the programs are presetting, you can skip some
programs so that to select your favorite channels only.
1. Press CH+/- button or
Direct-digit Choosing
button to select a
MUTE
SCAN
STILL
MENU
DISPLAY
SLEEP
PIP
channel directly (take
PICTURE
channel 18 for example).
Tuning Program
ABC@
DEF
AUDIO
18
Program Number
C 28
ADJUST
TUNING
FUNCTION
TIMER
Edit Name
Color System
Sound System
GHI$
JKL%
MNO
AUTO
D/K
2.Press MENU CH+/-
and VOL+/- button,
till the Tuning Program
menu shown on the
right will display on the
screen.
Manual Search
Fine Tuning
Skip
POR&
STUV
*#()
WXYZ
Off
TV/AV
SWAP
P.STD
S.STD
CH+
MENU
CH-
VOL-
VOL+
3. press VOL-/+ button to set Skip
ON.
If you want to recover the skipped channel
H.LOCK
EXIT
1. Use Direct-digit Choosing button to select the number
of the channel to be recovered.
2. Do the above steps again.
CH.LIST
TIMER ZOOM
3. Press VOL+/- button to set Skip OFF.
Program swap
Swap function enables quick swap to the last watched program.
1
Suppose the channel number you
used just now is 8 and the channel
number you areusing is 18(as shown in
the figure).
2
If you want to return to the last
watched program channel 8, you can
simply press the swap button.
3
If you want to return to channel 18,
press the button again. Through this
function, you can easily change
between the channelyou are usingand
the channel youused last time.
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture menu
How to select picture modes
You can quickly select the desired picture mode from
three preset modes and one customized mode.
Press the P.STD button to call up
MUTE
SCAN
STILL
Video Mode
Video mode menu, and press
Bright
CH+/-button to select the
DISPLAY
SLEEP
PIP
ABC@
DEF
Normal
desired picture quality. Four kinds
GHI$
JKL%
MNO
of picture modes(i.e., "Normal",
"Soft","Personal" ,"Bright", ) can
be selected in turn.
Soft
POR&
STUV
*#()
WXYZ
Personal
TV/AV
SWAP
P.STD
S.STD
A sparesetting that canbe adjusted topersonal status
Personal
Normal
Soft
CH+
MENU
CH-
Designed for roomsthat have goodall round lighting
Designed for nighttime low lightviewing
VOL-
VOL+
Bright
Designed for roomswith high ambientlighting such
as daytime sport;
How to customize your own picture status
1
Press the MEUN button
H.LOCK
EXIT
and CH+/- button , till the
PICTURE menu shown on
the right display on the
screen. Press VOL+/- to
enter.
CH.LIST
TIMER ZOOM
MENU
PICTURE
Video Mode
Contrast
Personal
AUDIO
50
50
0
ADJUST
TUNING
FUNCTION
TIMER
Brightness
Saturation
Hue
0
0
Sharpness
Noise Reduction
Auto
2
Press the CH+/-buttons
to select the item to
adjusted, then press the
VOL-/+ buttons to obtain
the desired effect.
Note: 1. thehue item isavailable only in
NTSC system.
2.the video mode, the saturation,
the hue and the sharpness items are no
available in VGAand DVI mode.
Press VOL-
Dark
Press VOL+
Bright
Brightness
Contrast
Strong
Weak
Sharpness
Sharp
Soft
Shallow color
More purple
Deep color
More green
Saturation
Hue(only in NTSC mode)
NOTE these items areadjustable only whenthe "video mode" is
set as "personal".
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture menu
Noise Reduction
Automatically filters out and reduces the image noise
and improves picture quality when receiving weak
video signals.
MUTE
SCAN
STILL
1 After calling up the
Picture menu, press
CH+/- button to select
DISPLAY
SLEEP
PIP
ABC@
DEF
GHI$
JKL%
MNO
"Noise Reduction" item.
MENU
POR&
STUV
*#()
WXYZ
PICTURE
Video Mode
Contrast
Personal
AUDIO
TV/AV
SWAP
50
50
0
2 Press VOL+ to enter
the list. Select Off, Auto
Weak, Medium or
ADJUST
TUNING
FUNCTION
TIMER
Brightness
Saturation
Hue
P.STD
S.STD
0
0
Sharpness
Noise Reduction
CH+
MENU
CH-
Auto
Strong according
VOL-
VOL+
to the image noise.
3 Press menu return
to the picture menu.
H.LOCK
EXIT
CH.LIST
TIMER ZOOM
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound menu
To choose sound modes
You can quickly select the desired sound mode from
three preset modes and one customized mode.
Press the S.STD button to call up
Audio mode menu, and press
CH+/- button to select the
Audio Mode
Music
MUTE
SCAN
STILL
DISPLAY
SLEEP
PIP
desired sound quality. Four kinds
Standard
Hall
ABC@
DEF
of sound models (i.e., Music
Personal Standard and
Hall ) can be selected in turn.
,
GHI$
JKL%
MNO
,
Personal
POR&
STUV
*#()
WXYZ
TV/AV
SWAP
P.STD
S.STD
Sound quality
Sound mode
Personal
A spare settingthat can beadjusted to personaltastes
CH+
MENU
CH-
Normal sound with moderate bass andtreble setting
VOL-
Standard
Hall
VOL+
Designed to reducethe bass andtreble which
enhances the voice for news programs
Enables extra bassand treble toenhance the movie
experience
Music
H.LOCK
EXIT
CH.LIST
TIMER ZOOM
Balance
To balance right and left sound of the television.
The intermediate value is 0. When indication value of Balance
increases toward+50, sound of the right and left speaker
becomes stronger and weaker, respectively. When indication
value of Balance decreases toward -50, sound of the right and
left speaker becomes weaker and stronger.
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound menu
Setting Five Equalizer sound
The sound settings can be adjusted to suit your
personal preferences.
MUTE
SCAN
STILL
1 repeat the above step1,
calling up Sound menu.
DISPLAY
SLEEP
PIP
MENU
2 Press CH+/- buttons to
select "Five Equalizer", then
ABC@
DEF
PICTURE
0
0
Volume
AUDIO
Balance
GHI$
JKL%
MNO
press VOL+ buttons to enter
the submenu.
ADJUST
TUNING
FUNCTION
TIMER
Audio Mode
Five Equalizer
Surround
Auto Volume
Woofer
MUSIC
POR&
STUV
*#()
WXYZ
0
Off
0
TV/AV
SWAP
3 Press VOL+/- buttons to
select frequency to adjust,
then press CH+/- buttons to
adjust the value data.
P.STD
S.STD
No selectable
CH+
MENU
CH-
VOL-
VOL+
MENU
4 When you are satisfied with
the setting, press MENU button
to return to the previous menu.
PICTURE
AUDIO
0
0
120Hz
500Hz
ADJUST
TUNING
FUNCTION
TIMER
0
0
1500Hz
5000Hz
10000Hz
H.LOCK
EXIT
0
CH.LIST
TIMER ZOOM
Setting the surround sound
The surround sound feature expandsthe audio listening
field wider anddeeper to createexceptional sound
quality from the TV`s speakers.
Select Surround from -50 to+50 . Whenintermediate value
toward +50, theeffect will bedistinctness.
Repeated step 1-2, and pressCH+/- to selectsurround, and
then press VOL+/- toset the desiredvalue.
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound menu
Setting the Auto Volume
Each broadcasting stationhas its ownsignal conditions,
and so itis not easyfor you toadjust the volumeevery time
the channel ischanged. This featurelets you automatically
adjust the volumeof the desiredchannel and reducesthe
volume differences betweenchannels and programs,
providing a moreconstant overall level. This will alsoreduce
the dynamics ofsound.
MUTE
SCAN
STILL
DISPLAY
SLEEP
PIP
Repeated step 1-2, and press CH+/- to select Auto Volume,
and then press VOL+/- toadjust the desiredlevel.
ABC@
DEF
GHI$
JKL%
MNO
POR&
STUV
*#()
WXYZ
How to eliminate sound
TV/AV
SWAP
When you need to pay attention to surrounded sounds, or
there is a telephone calling you or there are some guests
visiting you, the sound elimination (mute) function is very
convenient.
P.STD
S.STD
CH+
MENU
CH-
VOL-
VOL+
1
Press the MUTE button on
the remote control and "MUTE"
type face willdisplay on the
lower part ofthe screen. At this
time, the sound of the TV set
is turned off.
H.LOCK
EXIT
Mute
CH.LIST
TIMER ZOOM
2
If you wantto recover the
sound, press the MUTE
button again or directly press
the VOL-/+ buttons.
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer menu
Timer setting
The clock will only work if the TV set is turned on
or in standby. When the set is disconnect from the
power supply or is turned off by the main power on
the rear panel, the clock loses power and will need
to be reset when the power is reconnected.
MUTE
SCAN
STILL
DISPLAY
SLEEP
PIP
1 Press the MENU button and CH+/- button, till the TIMER
menu display on the screen.
ABC@
DEF
GHI$
JKL%
MNO
POR&
STUV
*#()
WXYZ
TV/AV
SWAP
MENU
P.STD
S.STD
PICTURE
CH+
MENU
CH-
Timer
AUDIO
Time Off
ADJUST
TUNING
FUNCTION
TIMER
VOL-
VOL+
Time On
TimerOn Prog
Timer Prog
Prog Num
H.LOCK
EXIT
2 Press CH+/- buttons select "Timer", press VOL -/+
buttons to select hour or minute position; then press
digits buttonsto setthe valueof houror minute;
CH.LIST
TIMER ZOOM
3Press MENU button toreturn theprevious menu.
NOTE:
Indication will appear on the screen 1 minute prior to
expiry of set time.
Suppose Time Off is set, and indication is as follows:
1.If Timeroption is setting,
the time you set for Time
Off/Time Onwill be a point of
time. Otherwise, if Timer is
not set, the time you set for
Time Off/Time On will be a
period of time.
Time Off
When the aboveindication appears onthe screen,
set time maybe changed ifVOL+/- button ispressed.
2.Sleep Off/ Time Offcan
not be set at simultaneously.
If both of the two are set, the
later setup will be operation.
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer menu
You can set the On/Off times so that the set will :
Switch on automaticallyand tune tothe channel ofyour choice atthe time
you select.
Switch off automatically at thetime you select.
On/off time \Timer on Prog\ Timer Prog
1 Press MENU andVOL+/- button tocall up theTimer menu
on the screen.
MUTE
SCAN
STILL
DISPLAY
SLEEP
PIP
MENU
PICTURE
ABC@
DEF
Timer
AUDIO
Time Off
GHI$
JKL%
MNO
ADJUST
TUNING
FUNCTION
TIMER
Time On
TimerOn Prog
Timer Prog
Prog Num
POR&
STUV
*#()
WXYZ
TV/AV
SWAP
P.STD
S.STD
CH+
MENU
C-
2
Press CH+/- buttonsto select "Time On", press VOL-/+
buttons to selecthour or minuteposition; then pressdigits
buttons to setthe value ofhours or minutes.
(take 19:00 asan example)
VOL-
VOL+
H.LOCK
EXIT
MENU
CH.LIST
TIMER ZOOM
PICTURE
Timer
AUDIO
Time Off
ADJUST
TUNING
FUNCTION
TIMER
Time On
TimerOn Prog
Timer Prog
Prog Num
3 Press CH+/- buttonsto select "Timer On Prog", then
press VOL-/+ andprogram direct numberbuttons to select
your desired channel(take 8 asan example).
4press CH+/- buttonsto select "Timer Prog", press VOL-/+
buttons to selecthour or minuteposition; then pressdigits
buttons to setthe value ofhours or minutes.
5
Repeat step 1-2to set Time Off .(Take22:30 as an
example)
Download from Www.Somanuals.com. All Manuals Search And Download.
Function menu
It is possible to select language, OSD transparent, position and screen display
of the menuas follows:
Function setup
1. Press MENU buttononce, and theCH+/- button untilthe
following menu appearson the screen:
MUTE
SCAN
STILL
MENU
DISPLAY
SLEEP
PIP
PICTURE
English
Language
AUDIO
Menu Timeout
Menu Backgroud
BlueScreen
15 seconds
Transparent
Off
ABC@
DEF
ADJUST
TUNING
FUNCTION
TIMER
Calendar
GHI$
JKL%
MNO
East Europe
TeleText Language
Restore Default Value
POR&
STUV
*#()
WXYZ
TV/AV
SWAP
P.STD
S.STD
2. Press VOL+ buttonon the remotecontroller to callup the
FUNCTION menu.
CH+
MENU
CH-
3. Press CH+/- toselect desired itemon the menu.
4.Press VOL+/- to adjust the itemyou have selected.
VOL-
VOL+
OSD language option
Repeat step 3and 4 toselect the languageyou wanted from
the 13 kindsof languages.
H.LOCK
EXIT
CH.LIST
TIMER ZOOM
Menu Timeout
Repeat step 3and 4 toselect the timeof the OSDdisplay in
sequence as follows:5 seconds,15 seconds, 10seconds,
20seconds, 25seconds, 30seconds and 40seconds.
Menu Background
Repeat step 3and 4 toselect Transparent/ Opaque menu
background of OSD.
Blue Screen
Repeat step 3 and 4 to select Blue Screen On/Off.If you
select ON, when no signal, the background is blue; if you
select OFF, when no signal, the background is dark.
Download from Www.Somanuals.com. All Manuals Search And Download.
Function menu
Function setup (continue)
Calendar display and check
Repeat step 3 and 4 to enter Calendar menu as follows:
2005-01-01
MUTE
SCAN
STILL
Sun. Mon. Tue. Wed. Thu. Fri.
Sat.
1
DISPLAY
SLEEP
PIP
2
9
16
23
30
3
10
17
24
31
4
5
6
13
20
27
7
8
11 12
18 19
25 26
14 15
21 22
28 29
ABC@
DEF
GHI$
JKL%
MNO
POR&
STUV
*#()
WXYZ
Press VOL+/- toselect among year, month and day,
and then CH+/- to adjust them.
TV/AV
SWAP
P.STD
S.STD
Teletext Language
Repeat step 3 and 4 to select from 6 kinds of languages.
(West Europe/East Europe/Cyrillic/Greek/Arabic/Persian.)
CH+
MENU
CH-
VOL-
VOL+
Restore Default Value
Repeat step 3and 4 toreturn the factorymode.
H.LOCK
EXIT
CH.LIST
TIMER ZOOM
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjust menu
To choose picture aspect ratio
1 Using ZOOM buttons.
Press ZOOM button to select the
Normal
desired picture ratio. Three kinds
MUTE
SCAN
STILL
of aspect ratio models (i.e.,
Wide screen
4:3 mode
DISPLAY
SLEEP
PIP
"Normal", "Wide screen" and "4:3
mode") can be selected in turn.
ABC@
DEF
GHI$
JKL%
MNO
POR&
STUV
*#()
WXYZ
Aspect ratio
Picture effect
TV/AV
SWAP
no cut outon input signal picture with un-changed
scale displayed onthe screen(to keepthe scale,
maybe only thecenter area ofthe screen isactive)
Normal
P.STD
S.STD
CH+
MENU
CH-
input signal isvertically cut outby 10% andpicture's
center area isnon-linear zoomed tofill the whole
screen
Widescreen
4:3 mode
VOL-
VOL+
input signal isvertically cut outby 15.3%
no non-linear zoomed to fill thescreen
H.LOCK
EXIT
CH.LIST
TIMER ZOOM
2 Using the MENU buttons.
1Press MENU buttonand CH+/- button, till theADJUSTmenu
shown on theright display onthe screen.
MENU
PICTURE
Display Mode
AUDIO
Adjust
Normal
It does not
work on
the TV
ADJUST
RGB
Note: Under the HDTV
VGA and DVI signal,
there are only Normal
and 4:3 mode to adjust.
Default
TUNING
FUNCTION
TIMER
Auto Sync
Color Temperature
Black Stretch
Normal
Off
mode.
2 Press CH+/- buttonsto select Display Mode option,
then press VOL+buttons to selectthe desired option.
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjust menu
In VGA and DVI input mode, H-Position and V-Position can be adjusted to eliminate
transverse line interference and decentered picture as follows:
H-Position and V-Position adjust
Adjust is opted for adjusting H-Position and V-Position
as well asrelative parameters inVGA andDVI modes.
1. Press MENU button and CH+/- to call up the ADJUST
menu. as follows:
MUTE
SCAN
STILL
DISPLAY
SLEEP
PIP
VGA, DVI:
ABC@
DEF
MENU
GHI$
JKL%
MNO
PICTURE
Display Mode
Adjust
Normal
POR&
STUV
*#()
WXYZ
AUDIO
Only be adjustable
in the VGA/DVImode.
ADJUST
TUNING
FUNCTION
TIMER
RGB
TV/AV
SWAP
Default
Auto Sync
Color Temperature
Black Stretch
P.STD
S.STD
Normal
Off
CH+
MENU
CH-
VOL-
VOL+
2. Press VOL+ button on television or remote controller
to enter theadjust menu ofpicture position setup.
H.LOCK
EXIT
MENU
CH.LIST
TIMER ZOOM
PICTURE
Adjust
AUDIO
H Size
ADJUST
H Position
TUNING
V Size
V Position
FUNCTION
Fine Tune
TIMER
Smoothing
3. Press CH+/- buttonfor desired adjustparameter option.
4. Press VOL+/- fordesired adjust parameteroption until
satisfactory value isachieved. When VGAsignals are received,
the automatic modeis used forparameter adjustment.
H Size Horizontal size of picture can be adjusted in this item.
H Position: Horizontal position of picture can be adjusted in this item.
V Size: Vertical size of picture can be adjusted in this item.
V Position: Vertical position of picture can be adjusted in this item.
Fine Tune: Adjust phase to the best effect suiting for VGA signal.
Smoothing: make the line of the picture smooth.
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjust menu
RGB/Default/Auto Sync
1) RGB is opted for adjustment of the numerical value of red,
green and bluein VGA/DVI mode.
2) Default is opted for adjustment of parameters to delivery
setup in VGA mode.(After the operation, complete will be on
the right ofthe operation)
MUTE
SCAN
STILL
3) Auto Sync is opted for adjustment of picture location
frequency and phase parameters in VGA mode.(After the
operation, complete willbe on theright of theoperation)
DISPLAY
SLEEP
PIP
ABC@
DEF
GHI$
JKL%
MNO
POR&
STUV
*#()
WXYZ
Color Temperature
TV/AV
SWAP
Press CH+/- to make the icon to Color Temperature,
and press VOL+/- button to select.
P.STD
S.STD
CH+
MENU
There are four kinds of
modes (i.e., "Normal",
"cold" ,"Green","warm" )
can be selected in turn.
VOL-
VOL+
MENU
PICTURE
Display Mode
Adjust
Normal
AUDIO
ADJUST
TUNING
FUNCTION
TIMER
RGB
Default
H.LOCK
EXIT
Auto Sync
Color Temperature
Black Stretch
Normal
Off
CH.LIST
TIMER ZOOM
This will increaseor decrease Warm (red) and Cold
(blue) colors to suit personal preferences. Select Cold
to give the white colors a blue tint, Normal to give the
white colors a neutral tint, Warm to give the white colors
a red tint. Green to give the white colors a green tint.
Black Stretch
Black Stretch-(Automatically Increases the Contrast
Rage)
Download from Www.Somanuals.com. All Manuals Search And Download.
Lock setup
How to use the password function
Press H.LOCK button, Password will appearon the screen.
The television has the
function of security
default lock. Password
needs to be entered
when the program
lock mode is to be
set.
The initial password of thetelevision is 0000and security
default password is9443. then enterLock Set menu.(as
follow)
LOCK SET
Password
Off
Off
1
Tuner Lock
Prog Set
MUTE
SCAN
STILL
Prog Num
Source Lock
Child Lock
Max Vol
DISPLAY
SLEEP
PIP
Off
100
ABC@
DEF
Clear Lock
GHI$
JKL%
MNO
The television hasthe function ofsecurity default lock.
Password needs tobe entered whenthe program lockmode
is to beset.
POR&
STUV
*#()
WXYZ
TV/AV
SWAP
P.STD
S.STD
Note: If thepassword is notcorrectly entered, youwill be
required to reenterthe password andthe cursor willstay at
the first place.
The security default password is9443.
Press EXIT to cancel thewindow.
CH+
MENU
CH-
VOL-
VOL+
To set new Password
H.LOCK
EXIT
The password canbe changed.
After entering the Lock set menu, Press CH+/- to select
password, Press vol+/-, the screen willdisplay the follow.
CH.LIST
TIMER ZOOM
Old ----
If correct password is entered, the screen will display the
follow.
New ----
Press digital button to set the new desired password, and
the screen willdisplay the follow.
Note:
If Clear Lockis activated,
the password setup
cannot be changed.
Repeat ----
If the desired password is entered correctly twice, the old
password will be changed. If the desired password is not
correctly entered twice, the screen will display New ----, then
you have toreenter the password.
Download from Www.Somanuals.com. All Manuals Search And Download.
Lock setup
Tuner Lock
Press CH+/- to select Tuner Lock and VOL+/- to set On/
Off. (To set On, some operation such as search will be
not available.) When enter the TUNING menu, Tuner Lockwill
be on the screen, and the time will be the same with the main
menu if nooperation. If youwant to operateTUNING menu, you
need to enter the Lock menu to set Tuner Lock Off or operate
Clear Lock.
MUTE
SCAN
STILL
DISPLAY
SLEEP
PIP
Prog Set
ABC@
DEF
Prog Set is opted for setting up start channel. Press CH+/- button
to select Prog Set. Press VOL+/- button, sources can be
swapped in TV/SCART1/SCART2/HDTV/VGA/DVI mode. After
setup, the set mode will be entered if the television is switched off
and on again. To set Off, the television will memory the off-
channel.
GHI$
JKL%
MNO
POR&
STUV
*#()
WXYZ
TV/AV
SWAP
P.STD
S.STD
CH+
MENU
CH-
Prog Num
VOL-
VOL+
Prog Num is opted for setting up preset channel. Press CH+/-
button to select Prog Num. Press VOL+/- button, to select
channel number.(The item is not available except TV signal.)
Source Lock
H.LOCK
EXIT
Source Lock isopted to hinderexternal input modes, such as
AV, Scart andVGA. Press CH+/- button to selectthe option,
and press VOL+/- button to displaySource Lock menuas
follows:
CH.LIST
TIMER ZOOM
Source Lock
Off
Off
SCART1
SCART2
AV
Off
Off
Off
HDTV
VGA
DVI
Off
Press CH+/- button to select desired option. Press VOL+/-
button to set up the mode of Source Lock. If some Source Lock
is set ON, the mode will be entered and the screen will display
blue background with the mute mode activated and Lock. In
lock on mode, when screen is blank, icon Lock will be always
displayed on the screen. If lock mode is to be verified, enter
Source Lock submenu and set relative mode off, or select Clear
Lock in the Lock Set Menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
Lock setup
Child Lock
Press CH+/- button to select Child Lock.
Press VOL+/- button to set On or Off mode. If lock on
mode is set, Child Lock is in activated automatically.
In such case, if Child Lock button (button on the
television) is pressed, the screen will display Child
Lock, which can be erased by press of EXIT button. 5
seconds later after the latest press, the screen
display will disappear automatically. The Child Lock
mode can be resumed by entering Lock Set menu, set
Child Lock On or Off.
MUTE
SCAN
STILL
DISPLAY
SLEEP
PIP
ABC@
DEF
GHI$
JKL%
MNO
POR&
STUV
*#()
WXYZ
TV/AV
SWAP
Max Volume
P.STD
S.STD
Press CH+/- button to select Max Volume. Press
VOL+/- button for adjustment between 0 100. If a
certain value is set, when volume is being adjusted,
the sound value can not exceed maximum volume
value. If current volume is over Max Volume, when
Lock Set menu is set, current volume will become set
maximum volume. If current volume is below
maximum volume, customer set volume will stay
unchanged.
CH+
MENU
CH-
VOL-
VOL+
H.LOCK
EXIT
CH.LIST
TIMER ZOOM
Clear Lock
Press CH+/- button to select Unlock mode. Press
VOL+/- button to unlock all set modes, setting all lock
options to off, and the maximum volume returns to 100.
Download from Www.Somanuals.com. All Manuals Search And Download.
Others functions
NICAM
If the broadcasteris transmitting
Bilingual sound service. The
/
button on theremote control will
allow up to2 separate languages
to be selected.
You can press the
/
MUTE
SCAN
STILL
button to makea choice.
DISPLAY
SLEEP
PIP
ABC@
DEF
Display function
GHI$
JKL%
MNO
If current programnumber, color
system and soundsystem are tobe
displayed on thescreen, press
POR&
STUV
*#()
WXYZ
3
AUTO
BG
TV/AV
SWAP
DISPLAY button, and allthe related
information will appearat right up
corner of thescreen.
P.STD
S.STD
CH+
MENU
CH-
If the DISPLAY button is pressed
again, the displayedinformation will disappear.
(If the programis named, itsname will alsoappear ).
VOL-
VOL+
Auto program scan
H.LOCK
EXIT
CH.LIST
TIMER ZOOM
1 If you want to select a
desirable program, you may
scan all the TV programs in
memory. You can simply
press SCAN button to do
this.
Press scan button once,
there are nine pictures on
the screen. Press scan
button twice, there are
sixteen pictures on the
screen.
2 If you want to stop the
function during auto tunning,
simply press SCAN button
again.
Download from Www.Somanuals.com. All Manuals Search And Download.
Others functions
Sleep
The TV set will switch automatically to standby at the
preset time with the SLEEP time on. You may set the
sleep time, Operateas follows:
1. Press SLEEP button repeatedly to select the
number of preset minutes, the timer will be set in
sequence:
0min 5min 15min 30min 60min
90min 120min 0min
MUTE
SCAN
STILL
DISPLAY
SLEEP
PIP
2. After the sleep time is set, the Indication will appear
on the screen 1minute prior to expiry of set time.
ABC@
DEF
Time off
GHI$
JKL%
MNO
POR&
STUV
*#()
WXYZ
TV/AV
SWAP
3 If remaining timeof set timer is tobe displayed, press
SLEEP button again.
P.STD
S.STD
The TV set will switch off automatically at the preset time,
press CH+/- button to turn on again.
CH+
MENU
CH-
VOL-
VOL+
4 If to cancel sleep time, press SLEEP button repeatedly to
set as 0.
H.LOCK
EXIT
Picture Still
CH.LIST
TIMER ZOOM
Press Still button, the picture will be still; if to cancel, press Still
button again, the picture will resume.
Auto switch-off function
If an empty channel isselected or the TVprograms are
ended forthe day, thepower willbe switchedoff 5minutes
later automatically. If the "Off Time" is setting, it will be
switched off according to the presetting time. The auto
power offfunction does notwork undervideo input.
Under PC state, if no signals input, the television will
enter standbystatus 1minuteslater automatically.
Download from Www.Somanuals.com. All Manuals Search And Download.
Teletext functions
Teletext is an information system, broadcast by certain channels,
which can be read like a newspaper . It also provides subtitles for
people with hearing difficulties or those who are unfamiliar with the
language in which a particular programme is being broadcast
(cable networks, satellite channels, etc.).
Teletext function operation
You can press
button into TEXT mode, press
again to leave TEXT mode. All menu related
functions are not available in TEXT mode.
Only a few direct button control functions are
available in TEXT mode, they are:
MUTE
SCAN
STILL
DISPLAY
SLEEP
PIP
ABC@
DEF
GHI$
JKL%
MNO
1 Page up/down
POR&
STUV
*#()
WXYZ
Result: Use the CH+/- buttons to browse next
or previous page.
TV/AV
SWAP
P.STD
S.STD
CH+
MENU
CH-
VOL-
VOL+
2 Page number entering
Result: To select a teletext page either directly
enter the page number using the
numeric button pad on the remote
control or use CH+/- buttons, or the
colored Fast Text buttons.
H.LOCK
EXIT
CH.LIST
TIMER ZOOM
Download from Www.Somanuals.com. All Manuals Search And Download.
Teletext functions
(MIX)
While in Teletext mode press the
button will show the teletext data
superimposed on top of the TV picture. Press the button again to revert
back to Full text.
(HOLD)
Pressing the button will stop the teletext page automatically
updating.
This feature is very useful where there are several teletext pages or
(SIZE)
Pressing the button to change from different screen display size.
This feature is very useful as it magnifies the image making the characters
easier to read.
(REVEAL)
Pressing the button will reveal hidden text. This feature is used to reveal
information such as answers to Teletext on-line interactive puzzles.
TIMER
While in normal TV mode only, pressing the button TIMER will display the
teletext time in the top right corner for a few seconds.
(TEXT)
Press the button on the remote control to turn teletext On/Off.
(SUBTITLE)
Pressing the button will get the teletext decoder to automatically
search for the subtitle page. In NZ the subtitle is usually page 801.
(INDEX)
Press the button to show the list of teletext contents
(Fast text colored buttons)
Fast text automatically displays the four most commonly used pages that
the broadcaster thinks that you may want to choose next. Press the same
coloured button on the remote control as the coloured link at the bottom
of the teletext page to go directly to that page.
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
- Early malfunctions can be prevented. Careful and regular cleaning can
extend the amount of time you will have your new TV. Be sure to turn the power
off and unplug the power cord before you begin any cleaning.
Cleaning the Screen
1. Here`s agreat way tokeep the dustoff your screen for awhile. Wet a soft clothin a
mixture of lukewarmwater and alittle fabric softeneror dish washingdetergent. Wring
the cloth untilit`s almost dry, and thenuse it towipe the screen.
2. Make surethe excess wateris off the screen, andthen let itair-dry before youturn on
your TV.
Cleaning the Cabinet
To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth. Please be sure
not to use a wet cloth.
Extended Absence
If you expectto leave yourTV dormant for a longtime (such asa vacation), it`sa good
idea to unplugthe power cordto protect againstpossible damage fromlightning or
power surges.
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications and functions
Picture proportions 4:3/ Normal/ widescreen (3mode)
Picture element: 1366 768
Multi-input compatibility
Advanced technology for motion picture processing
Component video signal: YUV 1(480i/p, 720p, 1080i,1080p)
RGB input: D-sub 15-pin
1
Audio input: RCA-pin TYPE (L/R)
Audio system: stereo
Temperature
0
Working: 0
35 (320 F 900F) Storage: -15
60 (50F 140 F)
Humidity
Working: 20 70%
Pressure
Storage: 20 80%
Working: 800 1100hpa
Storage: 700 1100hPa
Size (WxDxH)
unit: mm
main component
1495 103 790
150V-240V, 50/60Hz
450W
Working conditions
Power consumption
P
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
For the sake of time and cost, it is strongly recommended that you check out
the problem by yourself according to the instructions listed hereunder before
contacting the after-sales service for technical assistance.
Verify if the television is properly plugged.
Verify if the television is properly supplied power.
Verify if electricity is available.
No picture, no sound
Blank screen
Verify if correct signals are input.
Press TV/AV button to change signal input to TV input.
Restart the television of power supply is interrupted.
Press Mute button and verify if Mute mode is set.
Switch to other channel and verify if the same problem
happens.
No sound
Press VOL+ button to see if the problem can be solved.
Verify if sound system is correct. Refer to some chapter
for adjust.
Poor sound
Verify if correct channel is selected.
Adjust the antenna.
Make adjustments by Fine Tune and Manual Search.
No picture in some
channel
Verify if the same problem exists in other channels.
Check out of picture and sound systems.
Refer to relative instructions in the Manual for color
adjust.
No color for some
channel program
(black and white)
Verify if the antenna is correctly connected.
Verify if the antenna is in good condition.
Make fine adjustment of channel.
Spots with some or
all pictures
Check for local interference such as an electrical
appliance or power tool.
Horizontal/vertical bars
or picture shaking
Disconnect the television from power supply and, 10
seconds later, connect the television to the power supply.
If the problem still exists, contact authorized after-sales
service for technical assistance.
Television out of control
Note: Do not leave the television with static picture in an extended period as it may result in
residual image on your television screen.
Note: Production of the plasma screen requires high and precision technologies. However,
there might be some dark or bright (red, blue or green) spots, or some anomalistic stripes or
spots. This is not defect. If the TV set is used in an area 2,400 meters above the sea level where the air
pressure is below 750hpa, the picture on the plasma screen may be affected and a muffled sound might
be produced. These phenomena might happen in the area 1,500 meters above the sea level. This is
resulted from difference between air pressures inside and outside the display. This is not a defect covered by
the limited warranty.
NOTE: Design and specifications are subject to change without notice.
The dimension in this manual is a approximation.
Download from Www.Somanuals.com. All Manuals Search And Download.
0090506983 01
Download from Www.Somanuals.com. All Manuals Search And Download.
|