PLASMA TV
OWNER`S MANUAL
MODELS: P42SV6-C1
P42S6A-C2
Please READ this manual carefully
before operating the unit, and keep
it for future reference.
-
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO
USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
*To avoid electric hazards, it is strongly suggested that the back cover not be opened, as
there is no any accessory inside the casing.
*If necessary, please contact authorized after-sales services.
*A lighting flash mark in a triangle: Apotentially hazardous situation, which, if not avoided,
could result in serious injury by high voltage.
*An exclamation mark in a triangle: Major part or accessory of which technical specifications
must be followed if it is to be replaced.
Warning:
To avoid fire or electric hazards, never place your television receiver in an area
with heavy moisture. Attention should be paid to avoid accidental scratches or
impacts onto the PDP screen.
Caution:
Please read this manual carefully before using your television and keep this
manual in a good place for future reference.
To achieve the best performance of your television, read this User's Manual
carefully and properly store it for future reference.
Information of screen displays and figures in the User's Manual may vary due
to technical innovations.
Caution:
Unauthorized disassembly of this product is prohibited.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
The product should be tightly fixed to avoid
drop damages and even fire.
To avoid fire hazards, do not use this
product under direct sunlight or closely
to heat sources.
Unplug the power supply and antenna of
the product when there is a rainstorm,
especially
Do not locate the product close to water
or oil, which may cause fire hazards.
Thunderstorm.
Do not use damaged or worn electric plugs
and keep electric cord away from heat sources
to avoid electric shocks or fire hazards.
Do not connect excessive sockets in parallel
or share the same socket by multiple plugs
to avoid fire hazards.
Unauthorized disassembly of the television
is prohibited to avoid electric shocks or fire
hazards. Contact
The product must be placed on a solid and
stable surface to avoid collapse.
authorized after-sales
service if technical
service is needed.
Keep the product away from a transformer
or heat source to avoid fire hazards.
Disconnect the product from power supply
and contact authorized after-sales service
if abnormal sound is heard in the product.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
Don't use or store inflammable materials
near the product to avoid explosion or fire
hazards.
Don't place the product in a humid area to
avoid fire hazards.
Never touch the plug when your hand is wet
as this might cause electric shocks.
The antenna of the product should be away
from electric cable to avoid
electric shocks.
Always make sure that the televisionis well
plugged as poor electric
connection might cause fire.
When antenna is used, measures should be
taken to prevent water
from flowing down
along the cable into
the television.
Unplug the television, use soft fabric, never
chemicals, if you are going to make
cleaning of the product.
Make sure that no
water drops in the
product.
The plug and electric cable must be kept
clean to avoid electric
shocks or fire
hazards.
Disconnect the television from power supply
to avoid electric shocks or fire
hazards in a long
Disconnect the television from power supply
and antenna when there is a
rainstorm or thunderstorm
to avoid electric shocks
vocation.
or fire hazards.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Buttons and interface location
- This is a simplified representation of front panel.
- Here shown may be somewhat different from your TV.
Front panel Control
P42SV6-C1
P42S6A-C2
Underside
MENU
2
-
VOL
+
4
ENTER
6
SOURCE
1
CH
5
MENU
2
-
VOL
+
4
ENTER
6
SOURCE
1
CH
5
3
7
3
7
Buttons and functions
1 Input signal option:
selection of input signals of TV, VIDEO, S-Video, YUV, PC and DVI sources.
Menu button
2
3 Volume decrease:
for lowering the volume or adjusting the menu.
4 Volume increase:
for enhancing the volume or adjusting the menu.
5 Channel number increase and decrease.
6 Option confirmation.
7 Power button
for turning on or off the power supply.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Buttons and interface location
Rear panel Control
Power Cord Socket
Antenna Input
Connect cable or
antenna signals to
the TV, either directly
Specifications page. Never attempt
or through your
cable box.
and switch
This TV operates on AC power.
The voltage is indicated on the
PC VIDEO Input
to operate the TV on DC power
Connect the monitor
output connector from
a PC to the jack
DVD/DTV Input
Video output terminal
Connect ordinary video/audio
or other appliance
(Component )
Connect a component
video/audiodevice to
these jacks.
audio input terminals.
COMPONENT
L
VIDEO OUT AUDIO OUT
L
L-AUDIO-R
Y
Pb/Cb
Pr/Cr
ANT IN
SPEAKER
R
R
PC
AC-IN
EXT SUBWOOFER
VIDEO IN
S-VIDEO
L-AUDIO-R
L-AUDIO IN-R
DVI
RS-232
PC
Audio/Video Input
Connect audio/video
output from an external
device to these jacks.
EXT Subwoofer:
Subwoofer audio output
terminal.
DVI Input
Connect the monitor output
connector from a PC to the
appropriate input port.
Audio input
External Speaker
for linking DVI, PC or
other appliance audio
output terminals.
(8 ohm Output)
Connect to optional
external speaker(s).
RS-232 INPUT
(CONTROL/SERVICE)
PORT
Connect to the RS-
232 port on a PC.
S-Video Input
Connect S-Video out from
an S-VIDEO device to the
S-VIDEO input.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote controller
Battery loading
1.Slide open the cover of the battery compartment on the back of the remote controller.
2.Load two 5# alkaline batteries in the compartment. (plus and minus poles to respective
mark)
3.Replace the cover of the battery compartment.
1
2
3
Precautions
As strong light may interfere the
signals, change your position to
operate the remote controller if
the television cannot be turned
on or off as you expect.
Make sure that two 5# 1.5V alkaline
batteries are loaded. The batteries
must be of the same type. The batteries
must be located properly. The batteries
are not rechargeable.
Make sure that there is no obstacle
between the remote controller and
television set.
Keep the remote controller away from
heat source or humid area to ensure
effective performance of the remote
controller.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote controller key function
Calendar
Display of year/month/date
Picture still
MUTE
Switches the sound on or off.
Turns your TV on or off.
POWER
S-Video mode
select S-Video.
PC/DVI mode
select PC/DVI mode.
TV/VIDEO
Selects: TV, Video
DVD mode
select DVD mode
NUMBER buttons
Q.VIEW
Tunes to the last channel
viewed.
CHANNEL select
are not available
Information display
Display of current channel
signals, program and systems
OK button
VOLUME UP/DOWN
Increases/decreases
the sound level.
CHANNEL UP/DOWN
Selects available channels
found with Auto program.
Picture mode option
Standard, Soft,
Bright, Personal
Zoom
MENU
Brings up the main menu
to the screen.
Sound system option
Theater, Personal,
standard, news
Auto adjustment
(PC status only)
Color.SYS
Edit
Sound.SYS
Time.Skip
Scan
Swap
Shuttle
Color system option
Sound system option
OSD Position button
Time skip button
Program edit
PIP
Zoom/Move
Forward
REV
Sleep
USB
Left/Prew
UP
PIP system buttons
are not available
Right/Next
EXIT
DOWN
Pause
Nicam select button
Enter
ZOOM
HELP
Sleep buttons
is not available
Scan
for search the favorite program
Shuttle button
USB system buttons
are not available
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Effective range of remote controller
P42SV6-C1
P42S6A-C2
right
front 8m
45
45
right
45
left
45
left
front 8m
Color.SYS
Edit
Sound.SYS
Time.Skip
Color.SYS
Edit
Sound.SYS
Time.Skip
Scan
Swap
Shuttle
Scan
Swap
Shuttle
PIP
Zoom/Move
Forward
REV
Sleep
USB
PIP
Zoom/Move
Forward
REV
Sleep
USB
UP
Left/Prew
UP
Left/Prew
DOWN
Pau
Right/Next
EXIT
DOWN
Pause
Right/Next
EXIT
Er
ZOO
HEP
Enter
ZOOM
HELP
above
20
20
below
Ensure the remote controller is pointed toward the remote controller windows on
the display.
No obstacles should be placed between the remote controller and the remote
controller window.
The effective receiving scope for the signal is 8 meters to the front of the remote
controller windows,
and 45 to the left or right side and 20 above or below the control windows.
Use of remote controller:
1. To ensure a normal operation, the remote controller should not be dropped or
damaged in any way .
It should also be kept dry and away from all heat sources.
2. Battery replacement is necessary when the remote controller acts inconsistently
or stops operating the plasma display.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
External Equipment Connections
- Antenna or Cable Service without a Cable Box Connections
- For optimum picture quality, adjust antenna direction if needed.
AC power
socket
outdoor
antenna
Antenna input
75 standard
coaxial type
EXT SUBWOOFER
AC-IN
75 coaxial cable
300 twin-lead cable
Antenna adapter
Plug
(additional purchase)
Note
* It is recommended that you'd better use 75 coaxial cable to remove the
disturbance caused by airwave.
* Don't bind antenna cable and electric wire together.
To improve picture quality in a poor signal area, purchase
and install a signal amplifier.
If the antenna needs to be split for two Tv`s, install a 2-
WaySignal Splitter in the connections.
If the antenna is not installed properly, contact your dealer
for assistance.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
External Equipment Connections
DVDsetup
Howtoconnect
1. Connect the DVD video outputs (Y, Pb/Cb,
Pr/Cr) to the COMPONENT (Y, Pb/Cb, Pr/Cr)
INPUT jacks on the TV and connect the DVD
audio outputs to the AUDIO INPUT jacks on
the TV, as shown inthefigure.
2. If your DVD only has an S-Video output
jack, connect this to the S-VIDEO input on
COMPONENT
the TV and Connect the DVD audio outputs
to the AUDIO INPUT jacks on the TV, as
shown in the figure.
L
VIDEO OUT AUDIO OUT
L
L-AUDIO-R
Y
Pb/Cb
Pr/Cr
ANT IN
SPEAKER
R
R
PC
VIDEO IN
S-VIDEO
L-AUDIO-R
-AUDIO I
NOTE: If your DVD player does not have
componentvideooutput, useS-Video.
Howtouse
1. Turn on the DVD player, insert a DVD.
2. Use the S-Video button on the remote
control to select S-VIDEOmode.
or
3. Press Play button on external equipment
for program play.
DVD
4. Refer to the DVD player's manual for
operating instructions.
DTVsetup
-To watch digitally broadcast programs,
purchase and connecta digitalset-top box.
Howtoconnect
Use the TV`s COMPONENT (Y, Pb/Cb,
Pr/Cr) INPUT jacks, RGB or DVI port for
video connections, depending on your set-
top box connections available. Then, make
thecorrespondingaudioconnections.
Howtouse
1. Turn on the digital set-top box. (Refer to
the owner`s manual for the digital set-top
box.)
2. Use YUV on the remote control to select
YUV(Y, Pb/Cb, Pr/Cr)mode.
3. Press Play button on external
equipment for program play.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
External Equipment Connections
PCsetup
Howtoconnect
1. Use the TV`s RGB INPUT or DVI (Digital Visual Interface) INPUT port for video connections,
dependingonyourPCconnector.
If the graphic card on the PC does not output analog and digital RGB simultaneously, connect only
one of either RGB INPUT or DVI INPUT to display the Picture on the TV.
If the graphic card on the PC does output analog and digital RGB simultaneously, set the TV to either
RGB or DVI; (the other mode is set to Plug and Play automatically by the TV.)
2. Then, make the corresponding audio connection. If using a sound card, adjust the PC sound as
required.
Howtouse
1. Turn on the PC and the TV.
2. Turn on the display by pressing the POWER button on the TV's remote control.
3. Use PC/DVI on the remote control to select PC or DVI source.
4. Check the image on your TV. There may be noise associated with the resolution, vertical pattern,
contrast or brightness in PC mode. If noise is present, change the PC mode to another resolution,
change the refresh rate to another rate or adjust the brightness and contrast on the menu until the
picture is clear. If the refresh rate of the PC graphic card can not be changed, change the PC graphic
cardorconsultthemanufacturerofthePCgraphiccard.
NOTES:
1
2
UseaDVIcableorD-SUBcable.
Avoid keeping a fixed image on the TV's screen for a long period of time. The fixed image may
become permanently imprinted on the screen.
3
The synchronization input form for Horizontal and Vertical frequencies is separate.
COMPONENT
L
VIDEO OUT AUDIO OUT
L
L-AUDIO-R
Y
Pb/Cb
Pr/Cr
ANT IN
SPEAKER
R
R
PC
AC-IN
EXT SUBWOOFER
VIDEO IN
S-VIDEO
L-AUDIO-R
L-AUDIO IN-R
DVI
RS-232
PC
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching ON/OFF the TV set
In the manual, the OSD (on screen display) may be different from your TV`s because it
is just an example to help you with the TV operation.
Power ON/OFF
Switching ON/OFF the TV set
1Please press down the power switch to switch
on AC power supply and the power indicator will
light .
2If the indicator is lighting in red, press button
on the remote control again.
Remote receiving
window
Indicator
display on the front
SOURCE
MENU
- VOL +
CH
ENTER
3If you want to exchange to standing by status,
please press down button
on the remote
controller.
4 If you want to fully switch off the power
supply for the TV set, please press down the
power switch button on the TV set.
Auto switch-off function
If an empty channel is selected or the TV
programs are ended for the day, the power will be
switched off 5 minutes later automatically. If the
"OFF TIME" is setting, it will be switched off
accordingtothepresetting time.
(Note: If the "Off timer" is less than 5 minutes, it will
beswitchedoffautomaticallytothepresettingtime. )
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV Program
You can watch TV program in a presetting channel.
Watching TV program
To select the TV mode
Before watching TV program, you may ensure your tv in
TV mode.
Press TV/AV button to select tv mode.
How to select the desired program
1 Using "Program number" buttons.
Directly enter the channel number with the numeric keypad
on the remote control.
To select channel numbers from 10 ~ 99 ,press continuously
the numeric buttons.
2 Using the CH+/- buttons.
Press the CH+ button to select a channel number in number
increasing direction.
Press the CH- button to select a channel number in number
decreasing direction.
3 Using Prog. NO. Function.
Press the MENU button and VOL+/- button, till picture
menu shown on the right display on the screen.
Press the VOL+ button to select a
Prog.No.
26
channel number in number
increasing direction.
Sound System
Color System
Fine Tune
D/K
AUTO
00
Search
527.27 MHz
Press the VOL- button to select a
channel number in number
decreasing direction.
Auto Search
<Vol+> Adjust
picture sound tuner function signal timer
How to select the desired sound
Press the VOL-/+ buttons on the remote or the front of the
TV set to adjust the volume level. The range is 0~100.
When the volume buttons are pressed the volume level is
displayed automatically on the TV screen.
Volume
MENU to Exit
Vol+/Vol- to Adjust
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV Program continued
Watching TV program
If the colour of some channel is abnormal
Usually colour system should be set
in the auto position. However if the
Prog.No.
26
Sound System
D/K
colour displayed on the screen are
Color System
AUTO
Fine Tune
00
incorrect, you can manually select the
Search
527.27 MHz
Auto Search
<Vol+> Adjust
correct colour system.
Press the menu and VOL+/- button, till
the picture menu shown on the right will
display on the screen.
picture sound tuner function signal timer
If picture color is abnormal
Prog.No.
26
Sound System
Color System
Fine Tune
D/K
Press the CH+/- buttons to select
"color system", then press the VOL-/+
buttons to select the correct color
system. In general, you can set it as
"AUTO".
AUTO
00
527.27 MHz
Search
Auto Search
<Vol+> Adjust
picture sound tuner function signal timer
If sound is abnormal
Prog.No.
26
Sound System
Color System
Fine Tune
D/K
AUTO
Press the CH+/- buttons to select
"sound system", then press the VOL-
/+ buttons to select the correct sound
system.
00
Search
527.27 MHz
Auto Search
<Vol+> Adjust
picture sound tuner function signal timer
Program review
Swap function enables quick swap to the last watched program.
1
Suppose the channel number you
used just now is 8 and the channel
number you are using is 18 (as shown
inthefigure).
2
If you want to return to the last
watched program channel 8, you can
simplypress theQ.Viewbutton.
3
If you want to return to channel 18,
press the button again. Through this
function, you can easily change
between the channel you are using
and the channel you used last time.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Searching Channel
This TV set has three methods to set channels, which are respectively full automatic,
manual search fine tune.
In this section, how to use the remote control to set channel is explained. You can also use
buttons on the TV set to set channel.
Full automatic search mode
Automatic search
1
Press the MENU button and
26
Prog.No.
Sound System
Color System
Fine Tune
D/K
VOL+/- button, till tuner menu
shown on the right display on
the screen.
AUTO
00
Search
527.27 MHz
<Vol+> Adjust
Auto search
picture sound tuner function signal timer
Note : the tuner menu will be
only operated in normal TV mode.
26
Prog.No.
2 Press the CH+/- buttons to
select "Auto Search" item.
Sound System
Color System
Fine Tune
D/K
AUTO
00
Search
527.27 MHz
<Vol+> Adjust
Auto search
picture sound tuner function signal timer
Program Searching
Press <OK> to Cancel
073.25
3 Press the VOL+ button to
ensure automatic search
function work.
Programs Found
01
After the search has finished,
the Program Table will display
on the screen.
Program Table
00 @0497
01 @0622
02 @0832
03 @1442
04 @1842
05 @2112
06 @2322
10
11
12
13
14
15
16
17
18
19
----- 20
-----
-----
-----
-----
-----
-----
-----
-----
-----
-----
----- 21
----- 22
----- 23
----- 24
----- 25
----- 26
----- 27
----- 28
----- 29
All channels now playing
program will be automatically
preset in order.
07
08
09
-----
-----
-----
Vol+/Vol- Ch+/Ch- to Select Program
1=Del 2=Change 3=Rename 4=Favorite 5=Skip
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual search
Manual search
TV01
AUTO
D/K
1
Press the CH+/- buttons or the
PROGRAM NUMBER 0-9
button to choose desired
channels regard channel 1 as
example
2
Press the MENU button and
01
VOL+/- button, till the tuner
menu shown on the right display
on the screen.
Prog.No.
Sound System
Color System
Fine Tune
D/K
AUTO
00
Search
527.27 MHz
<Vol+> Adjust
Auto Search
picture sound tuner function signal timer
3 Press the CH+/- buttons to
select " Search" item.
01
Prog.No.
Sound System
Color System
Fine Tune
D/K
AUTO
00
Search
527.27 MHz
<Vol+> Adjust
Auto Search
4 Press the VOL-/+ buttons to
start searching.
picture sound tuner function signal timer
The VOL- down button is used
for lower side program search.
The VOL+ up button is used for
higher side program search.
Repeat this step, till find the
desired channel.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Fine tune
Fine tune
If the picture or sound are poor, try using the FINE TUNE
feature. Do not use this feature unless reception is poor.
TV08
AUTO
BG
1
Press the CH+/- buttons or
NUMBER 0-9 button to
choose desired channels
regard channel 8 as example
2
Press the MENU button and
08
Prog.No.
D/K
Sound System
Color System
Fine Tune
VOL+/- button, till the tuner
menu shown on the right display
on the screen.
AUTO
00
527.27 MHz
<Vol+> Adjust
Search
Auto Search
picture sound tuner function signal timer
3 Press the CH+/- buttons to
select "Fine Tune" item.
08
Prog.No.
D/K
AUTO
+05
Sound System
Color System
Fine Tune
4 Press the VOL-/+ buttons all
through to carry out fine tune,
till the best picture and sound
are obtained, then loosen the
button.
Search
527.27 MHz
<Vol+> Adjust
Auto Search
picture sound tuner function signal timer
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture Control Functions
Multiple picture modes
How to select picture modes
You can quickly select the desired picture mode from
three preset modes and one customized mode.
Press the PSM button to select the
Standard
desired picture quality. Four kinds
of picture modes (i.e., "Standard",
"Soft", "Bright","Personal", )
can be selected in turn.
Soft
Bright
Personal
The 4 modes are
Picture mode
Picture quality
A spare setting that can be adjusted to
personal tastes
Personal
Designed for rooms that have good all round
lighting
Standard
Soft
Designed for nighttime low lightviewing
Designed for rooms with high ambient
lighting such as daytime sport;
Bright
How to customize your own picture status
1
Press the MENU button and
50
50
05
Brightness
Contrast
Sharpness
Chroma
VOL+/- button , till the picture
menu shown on the right
display on the screen.
50
50
Tint
Personal
Picture Mode
picture sound tuner function signal timer
2 Press the CH+/- buttons to
select the item to adjusted,
then press the VOL+/- buttons
to obtain the desired effect.
Brightness
MENU to Return Vol+/Vol- to Adjust
I T E M
Press VOL-
Dark
Press VOL+
Brightness
Contrast
Bright
Weak
Strong
Sharp
Sharpness
Chroma
Soft
Deep
Shallow
More green
Tint(only in NTSC mode)
More purple
NOTE these items are adjustable only under the personal setting.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound Control Functions
Multiple sound modes
How to choose sound mode
Theater
Press the SSM button to select the
desired sound quality. Four kinds
Personal
Standard
News
of sound modes (i.e., Theater
Personal Standard and
News ) can be selected in turn.
,
,
Sound mode
Personal
Standard
News
Sound quality
A spare setting that can be adjusted to
personal tastes
normal sound with moderate bass and treble
setting
Designed to reduce the bass and treble which
enhances the voice for news programs
Enables extra bass and treble to enhance the
movie experience;
Theater
How to customize you own sound quality
Balance
0
1 Press the MENU button and
VOL+/- button , till the sound
menu shown on the right
display on the screen.
Equalizer
Personal
Sound Mode
picture sound tuner function signal timer
2 Press the CH+/- buttons to
move select the item to be
adjusted, then press the VOL-/+
buttons to obtain the desired
effect.
Balance
+04
Equalizer
Sound Mode
Personal
picture sound tuner function signal timer
I T E M
Press VOL-
R down
Press VOL+
L down
Balance
NOTE these items are adjustable only under the personal setting.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Equalizer and mute
How to use Equalizer
1
Press the MENU and VOL+/
Balance
+04
Equalizer
VOl- button , till the sound menu
shown on the right display on
the screen.
Sound mode
Personal
picture sound tuner function signal timer
2
Press the CH+/- buttons to
EQUALIZER
select "Equalizer", then press
the VOL+ buttons, the menu
shown on the right display on
the screen.
3
Press the VOL+/- buttons to
select frequency to adjust, then
press the CH+/- buttons to adjust
the value data.
How to eliminate sound
When you need to pay attention to surrounded sounds, or
there is a telephone calling you or there are some guests
visiting you, the sound elimination (mute) function is very
convenient.
MUTE
1 Press the MUTE button on
the remote control and "MUTE"
type face will display on the
lower part of the screen. At this
Mute
time, the sound of the TV set
is turned off.
2 If you want to recover the
sound, press the MUTE
button again or directly press
the VOL-/+ buttons.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Time Functions
Clock setting and timer on/off functions
Clock setting
The clock will only work if the TV set is turned on or in
standby. When the set is disconnect from the power
supply or is turned off by the main power on the rear
panel, the clock loses power and will need to be reset
when the power is reconnected.
Clock
00:00
00:00
AV
On Time
1 Press the MENU button and
VOL+/- button, and the timer
menudisplayonthescreen.
On Prog.
Off Time
00:00
00:00
DVI
Remind Time
Remind Prog.
picture sound tuner function signal timer
2 Press the CH+/- buttons select
"Clock",press the VOL -/+
buttons to select hour position;
then press the CH+/- buttons to
set the value of hour; press again
the VOL +/- buttons to select the
minutes position, then press the
CH+/- buttons to set the value of
minute.
Clock
00:00
00:00
AV
On Time
On Prog.
Off Time
00:00
00:00
DVI
Remind Time
Remind Prog.
picture sound tuner function signal timer
On/off timer
Using on/off timer function, the TV set can automatically
turn on to a preset program or shut down in a preset time.
1 Press the MENU and VOL+/-
button to call up the timer menu on
thescreen.
Clock
00:00
00:00
AV
On Time
On Prog.
Off Time
00:00
00:00
DVI
Remind Time
Remind Prog.
2
Press the CH+/- buttons to select
picture sound tuner function signal timer
"On time", press the VOL-/+buttons
to select hour position; then press
the CH+/- buttons to set the value of
hours; press again the VOL +/-
buttons to select the minute position,
then press the CH+/- buttons to set
the value of minute..(take 18:00 as
anexample)
Clock
00:00
18:00
AV
On Time
On Prog.
Off Time
00:00
00:00
DVI
Remind Time
Remind Prog.
picture sound tuner function signal timer
3
Press the CH+/- buttons to select
Clock
00:00
00:00
08
"On prog", then press the VOL-/+ or
program direct number buttons to
select your desired channel (take 8
asanexample).
On Time
On Prog.
Off Time
23:00
00:00
DVI
Remind Time
Remind Prog.
picture sound tuner function signal timer
4
time .(take23:00asanexample)
Repeat step 1-2 to set
Off
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Time Functions
Remind Time and Remind Program setting
How to use the remind time and program
Program remind timer, that displays an on-screen
reminder prompt, when a program on a different
channel is dueto start.
Clock
00:00
00:00
AV
On Time
1Press the MENU and VOL+/-
button to call up the timer
menu on the screen.
On Prog.
Off Time
00:00
00:00
DVI
Remind Time
Remind Prog.
picture sound tuner function signal timer
2 Press the CH+/- buttons to
select "Remind Time", then
press the VOL -/+ buttons to
select hour position; then press
CH+/- to set the value of hour.
Repeat 2 step to select the
minute position and set the
value of the minute.(take 19:30
as an example)
Clock
00:00
00:00
AV
On Time
On Prog.
Off Time
00:00
19:30
DVI
Remind Time
Remind Prog.
picture sound tuner function signal timer
3 Press the CH+/- buttons to
move the cursor to "REMIND
PROG", then press the VOL -/+
buttons or the program direct
number buttons to set the
desired channel or source
(takeDVIasanexample).
Clock
00:00
00:00
AV
On Time
On Prog.
Off Time
00:00
00:00
DVI
Remind Time
Remind Prog.
picture sound tuner function signal timer
NOTE the Tv offers multi-remind program.
I.e., "PC", "AV","SV", "DVI", "YUV", "00",
"01", "02",......."99") can be selected in turn.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Multiple aspect ratio and language
Multiple aspect ratio and language setting
How to choose picture aspect ratio
1 Using ZOOM button.
Press the ZOOM button to select the
Fill All
desired picture ratio. Four kinds
Normal
Wide
of aspect ratio modes (i.e., Fill all
Normal Wide and Zoom
,
,
)
can be selected in turn.
Zoom
Aspect ratio
Picture effect
no cut out on input signal ,screen is filled
by picture
Fill all
Normal
Wide
no cut out on input signal picture with
un-changed scale displayed on the screen
(to keep the scale, maybe only the center
area of the screen is active)
input signal is vertically cut out by 10% and
picture's center area is non-linear zoomed
to fill the whole screen
input signal is vertically cut out by 15.3%
no non-linear zoomed to fill the screen
Zoom
2 Using the MENU button.
1Press the MENU button and
English
Center
00:00
Language
OSD Position
Time Skip
Aspect Ratio
Calendar
VOL+/- button
,
till the
function menu shown on the
right display on the screen.
picture sound tuner function signal timer
English
Center
00:00
Language
OSD Position
Time Skip
2 Press the CH+/- buttons to
Aspect Ratio
Calendar
select
Aspect Ratio item,
then press the VOL+ buttons
toselect theitemtodesired.
picture sound tuner function signal timer
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Multiple OSD position
Multiple OSD position setting
How to choose OSD position
1 Using "OSD posi" button.
Press the "OSD posi" button to select the desired
picture position. Five kinds of position modes (i.e.,
Center
,
Left T
,
Left B ) can be selected in turn.
Right T
Right B and
OSD position
OSD position
OSD position
Center
Left T
Right T
OSD position
OSD position
Left B
Right B
2 Using the MENU button.
1Press the MENU button and
English
Language
OSD Position
Time Skip
Center
00:00
VOL+/- button
,
till the
Aspect Ratio
Calendar
function menu shown on the
right display on the screen.
picture sound tuner function signal timer
English
Center
00:00
Language
OSD Position
Time Skip
2 Press the CH+/- buttons to
Aspect Ratio
Calendar
select
OSD Position item,
then press the VOL+ buttons
to select the item to desired
position.
picture sound tuner function signal timer
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Calendar search and time skip
This TV sethas been designed to search the calendar from the year 1900 to 2100.
Calendar search and time skip
To choose calendar search
1Press the MENU button and
English
Center
00:00
Language
OSD Position
VOL+/- button
,
till the
Time Skip
Aspect Ratio
Calendar
function menu shown on the
right display on the screen.
picture sound tuner function signal timer
2 Press the CH+/- buttons to
English
Center
00:00
Language
OSD Position
Time Skip
select "Calendar item, then
press the VOL+ buttons to
display the calendar menu on
thescreen.
Aspect Ratio
Calendar
picture sound tuner function signal timer
3. Press VOL+ button to
search the desired year or
month.
Jan
00:05:52
S
M
T
4
W
5
T
F
7
S
1
8
4. Press CH+/- button to
adjust the desired year or
month.
2
9
3
6
10 11 12 13 14 15
16 17 18 19 20 21 22
23 24 25 26 27 28 29
30 31
5. Press the TIME button
to return to previous mode.
To choose time skip function
Repeat step 1. to select
English
Center
05:30
Language
OSD Position
Time Skip
"Time Skip
press the VOL+/- buttons to
setthedesired time.
item, then
Aspect Ratio
Calendar
picture sound tuner function signal timer
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Others functions
Program Edit Scan Nicam and display functions
Program edit and Scan
1 Press the Edit button the
,
Program Table display on the
screen.
Edit
Scan
Program Table
00 @0497
01 @0622
02 @0832
03 @1442
04 @1842
05 @2112
06 @2322
10
11
12
13
14
15
16
17
18
19
----- 20
-----
-----
-----
-----
-----
-----
-----
-----
-----
-----
----- 21
----- 22
----- 23
----- 24
----- 25
----- 26
----- 27
----- 28
----- 29
07
08
09
-----
-----
-----
2 Press CH+/- or VOL+/-
button to select program, then
press the number button 4
to set favorite program.
Edit
Scan
Vol+/Vol- Ch+/Ch- to Select Program
1=Del 2=Change 3=Rename 4=Favorite 5=Skip
3 Repeat step 2 you may set
multiple favorite program.
Favorite
TV04
AUTO
D/K
4 Press SCAN button to enjoy
desired program.
NICAM
Press the I/II button will result in fast swap of NICAM
function of current program.
Display function
DISPLAY
Press the DISPLAY button, then
TV03
AUTO
BG
the channel number and system
will be displayed on the screen.
Press the DISPLAY button again,
it is disappear.
Shuttle function
Shuttle function enables quick swap to setting program.
Press Shuttle button about 3second,
Shuttle
TV03
AUTO
BG
Shuttle
and the display Shuttle on the screen,
at the time, you mayoperate other, then
if you scan over program, you may press
again shuttle button to returnto the
setting program.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
PC setting
PC setting
PC setting
Press PV/DVI button to select PC mode.
1 Press the MENU button
and VOL+/- button , till the
50
50
05
50
50
Red
Green
Blue
H position
signal menu shown on the
V position
Auto Adjust
<Vol+ > Adjust
right display on the screen.
picture sound tuner function signal timer
2 Press the CH+/- buttons to
select the item to adjusted,
then press the VOL+/-
buttonstoadjust.
I T E M
Press VOL-
Press VOL+
Red
Stronger
Stronger
Stronger
Weaker
Weaker
Weaker
Green
Blue
Note
Recommendatory frequency as follow:
H-frequency V-frequency
Sequence
frequency
Remark
KHz
31.5
Hz
60
60
60
DOS
VESA
VESA
37.88
48.36
NOTE As the frequency of display differ in PC device you may
select the appropriate frequency to obtain desired effect.
If the signal of receive is excess, the picture can not be displayed
or wrong on the screen.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
PC setting continued
In VGA and DVI input mode, H-Position and V-Position can be adjusted to eliminate
transverse line interference.
Multiple picture position setting
PC setting
1 Press the MENU button
and VOL+/- button , till the
50
Red
50
05
50
50
Green
signal menu shown on the
right display on the screen.
Blue
H position
V position
Auto Adjust
<Vol+ > Adjust
picture sound tuner function signal timer
2 Press the CH+/- buttons to
select the item to adjusted,
then press the VOL-/+
buttons to obtain the desired
effect.
Note:
1. As adjusting H position or V position parameter, It is natural
that the picture will have faintness once in a while if the range is
more, then to adjust contrarily to normal position.
2. H-position,V-position,Auto Adjust are not available in TV
mode , AV and S-VIDEO mode.
3. Auto Adjust is only available in PC/DVI mode.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications and functions
Sereen diagonal line 42 inches
Picture proportions 4:3/16:9:(4 modes)
Panorama picture: 16:9
Picture element: 852 480
Contrast: 10000:1
Brightness: 1500cd/m2
Multi-input compatibility
Advanced technology for motion picture processing
Two 7W speakers/optional
Complex component: RCA-pin
Component video signal: YUV
3
1
S terminal: Mini DIN 4-pin
1
RGB input: D-sub 15-pin 1 (480i/p, 720p, 1080i)
Audio input: RCA-pinTYPE (L/R) 3: full support
separate audio frequency input
Audio system: stereo
Control port: RS-232 D-sub 9-pin
1
Model
P42SV6-C1
P42S6A-C2
Size (WXHXD)
unit:mm
main component
1050 664 88
1055 654 86
Working
conditions
150V-240V, 50/60Hz
380W
150V-240V, 50/60Hz
380W
Power
consumption
Temperature
Working: 0
35 (320 F 900 F) Storage: -15
60 (50 F 1400 F)
Humidity
Working: 20 70%
Pressure
Storage: 20 80%
Working: 800 1114hpa
Storage: 600 1114hPa
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
For the sake of time and cost, it is strongly recommended that you check out
the problem byyourself according tothe instructions listedhereunder before
contacting the after-sales service for technical assistance.
Problem
No picture, no sound
Possible remedies
Turn on the power supply;
Properl y plug the TV set to the power socket;
Check to see i f the power cable of other appliance is plugged in the
TV set. Make sure that the power cable of the TV set is properly
connected.
Good picture, no sound
Depress the volume button;
Check out the audio frequency input signals.
Failure
controller
of
remote Check to see i f the remote controller and plasma displ ay receiving
window are blocked by other objects and if batteries are properly
loaded.
No color, weak color or Designate the item of col or from the Picture menu and depress the
volume button;
poor picture
Keep the display and VCR separate a reasonable space;
Activate some functions to store picture brightness;
Make sure that the displ ay and signal source are avai lable and
turned on.
Excessive brightness or Adjust brightness or contrast.
darkness
Picture too big or small
Adjust the setup of si zes.
One speaker f ailure Balance the sound in the menu.
Slight sound fromdisplay Itisanormal phenomenon.
Note: Do not leave the television with static picture in an extended period as it may
result in residual image on your television screen.
Note: Production of the plasma screen requires high and precision technologies. However,
there might be some dark or bright (red, blue or green) spots, or some anomalistic stripes or
spots. This is not defect. If the TV set is used in an area 2,400 meters above the sea level where
the air pressure is below 750hpa, the picture on the plasma screen may be affected and a
muffled sound might be produced. These phenomena might happen in the area 1,500 meters
above the sea level. This is resulted from difference between air pressures inside and outside
the display. This is not a defect covered by the limited warranty.
NOTE
Design and specifications are subject to change without notice.
The dimension in this manual is a approximation.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|