LCD TV
OWNER' S MANUAL
MODEL: L19M3
L22M3
L24M3
Please READ this manual carefully
before operating your TV, and retain
it for future reference
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY ANDWARNINGS
IMPORTANT SAFETY INSTRUCTION
1) Read theseinstructions.
CAUTION
2) Keep theseinstructions.
RISK OF ELECTRIC SHOCK
DO NOT OPEN!
3) Heed allwarnings.
CAUTION
4) Follow allinstructions.
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK).NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
5) Do not use this apparatusnear water.
6) Clean onlywith dry cloth.
7) Do not block any ventilationopenings, install
in accordance withthe instructions.
8) Do not install near anyheat sources suchas
radiations, heat registers, stoves, or other
apparatus (including amplifiers)that produce
heat.
The symbol indicates that dangerous
voltages constituting a risk of electric shock
are present within this unit.
The symbol indicates that there are
important operating and maintenance
instructions in the literaturaccompanying this
unit.
9) Do notdefeat the safetypurpose of the
polarized plug. Ifthe provided plugdoes not fit
into your outlet, consult an electricianfor
replacement of theobsolete outlet.
10) Protected thepower cord frombeing walked
on or pinchedparticularly at plugs, convenience
receptacles, and thepoint where theyexit from
the apparatus.
WARNING:
To reducethe risk offire or electricshock, do
not expose thisapparatus to rainor moisture.
11) Only use attachments/accessories specified
by the manufacturer.
WARNING:
The batteries shall not be exposed to
excessive heat such as sunshine, fire or the
like.
12) Unplug thisapparatus during lighting
storms or whenunused for longperiods of time.
13) Refer allservicing to qualifiedservice
personnel. Servicing isrequired when the
apparatus has beendamaged in anyway, suchas
power-supply cord orplug is damaged, liquid
has been spilledor objects havefallen into the
apparatus, the apparatushas been exposedto
rain or moisture, does not operatenormally, or
has been dropped.
This symbol indicates thatthis product
incorporates double insulation between
hazardous mains voltage anduser accessible
parts. When servicing useonly
14) Mains plugis used asthe disconnect device,
the disconnect deviceshall remain readily
operable.
identical replacement parts.
15) The ventilationshould not beimpeded by
covering the ventilationopenings with items,
such as newspapers, table-cloth, curtains, etc.
16) No nakedflame sources, suchas lighted
candles, should beplaced on theapparatus.
This marking indicates that this product should
not be disposed with other household wastes
throughout the EU. To prevent possible harm to
the environment or human health from
17) Attentionshould be drawnto the
environmental aspects ofbattery disposal.
18) The useof apparatus inmoderate climate.
19) The apparatusshall not beexposed to
dripping or splashingand that noobjects filled
with liquids, suchas vases, shallbe placed on
the apparatus.
uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of
material resources. To return your used device,
please use the return and collection systems or
contact the retailer where the product was
purchased. They cantake this product for
environmental safe recycling.
-2-
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY ANDWARNINGS
High voltages are used in the operation of this television
receiver. Do not remove the cabinet back from your set.
Refer servicing to qualified service personnel.
Never stand on, lean on, or suddenly push the television or
its stand. You should pay special attention to children.
Serious injury may result if it falls.
To prevent fire or electrical shock hazard, do not expose
the television receiver to rain or moisture.
Do not place your television on an unstable cart, stand,
shelf or table. Serious injury to an individual , and damage
to the television, may result if it falls.
Do not drop or push objects into the television cabinet
slots or openings. Never spill any kind of liquid on the
television receiver.
When the television receiver is not used for an
extended period of time, it isadvisable to disconnect
the ACpower cord from the ACoutlet.
Do not block the ventilation holes in the back cover.
Adequate ventilation is essential to prevent failure of
electrical components.
Avoid exposing the television receiver to direct sunlight
and other sources of heat. Do not stand the television
receiver directly on other products which give off heat,
e.g. video cassette players and audio amplifiers. Do not
place naked flame sources, such as lighted candles on
the television.
Dim:515*320mm(
Do not trap the power supply cord under the television
receiver.
If the television is to be built into a compartment or similar
enclosure, the minimum distances must be maintained. Heat
build-up can reduce the service life of your television, and
can also be dangerous.
-3-
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
Accessories
Main features
Used as Television, display terminal, PC display
High luminance, wide viewing angle
Can store 100 TV programs
Infrared Remote Controller............1
Battery(AAA)...............................2
User s Manual...............................1
HDMI interface
AV2IN/AVOUT cord....................1
Multi-Media player (USB);
Main parameter
Viewing Picture Size (Diagonal)
Resolution
18.5 inch
1366x768
16 : 9
21.6 inch
1366x768
16 : 9
23.6 inch
1920x1080
16 : 9
Aspect Ratio
TV System
PAL/BG
PAL/BG
PAL/BG
Video Signal System
Receiving Channel
PAL/NTSC/SECAM
1-100
PAL/NTSC/SECAM
1-100
PAL/NTSC/SECAM
1-100
Input Power Voltage
Power consumption
AC 100-240V~50/60Hz AC 100-240V~50/60Hz AC 100-240V~50/60Hz
30W
60W
60W
Audio Output Power THD 7% 2 x 3W
2 x 3W
2 x 3W
Signal Input
Analog RGB(VGA) x 1
High-Definition Multimedia Interface (HDMI) x 2
Composite Video Input x 2
Composite Video output x 1
Audio Input x 3
YCb (Pb)Cr (PR) x 1
USB x 1
RF x 1
Composite Video input >=350
Horizontal definition TV line
Y Cb(Pb ) Cr(Pr)
>=400
-4-
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
Front panel (L19M3)
1: Remote controlsensor.
2: Indicator LED:GREEN
RED
3
POWER ON.
STANDBY.
1
2
4
3: Side buttons
4: Power button:Press the Power Button to
turn the unit on oroff.
30 30
Front panel (L22M3/L24M3)
1: Remote controlsensor.
3
2: Indicator LED:GREEN
RED
POWER ON.
STANDBY.
1
2
4
3: Side buttons
4: Power button:Press the Power Button to
turn the unit on oroff.
30 30
KEYBOARD (L19M3/L22M3/L24M3)
1
2
SOURCE:
Display the input source menu.
MENU:
Display main MENU.
CH+/CH-
3
SOURCE
In TV mode, press "CH+" or "CH-" to change the channel up and down.
In MENU mode, press "CH+" or "CH-" to select items.
In standby mode, press "CH+" or "CH-" to turn on the TV.
VOL+/VOL-
MENU
CH+
4
CH-
Adjust sound level.
In MENU mode, press "VOL+" or "VOL-" to adjust the item that you selected.
5. STANDBY
VOL+
VOL-
Press this button to turn the unit ON from STANDBY mode.
Press it again to turn the set back to STANDBY.
6. USB
STANDBY
USB
The USB memory stick should be plug in the unit directly. USB extension cable
should not be used to avoid failing of data transferring and interference caused.
-5-
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
REAR AV PASTER (L19M3)
HDMI1 INPUT
HDMI2 INPUT
VGA INPUT
PC
AUDIO INPUT
RF INPUT
AV2 IN/AV OUT
AC-INPUT
100-240V~ 50/60Hz
All the terminalsare (from leftto right):
AC POWER SOCKET, ANTENNA, AV2 IN/AV OUT, PCAUDIO INPUT, VGA, AUDIOINPUT,
YPbPr, AV INPUT, HDMI 1, HDMI 2, POWER SWITCH.
Note: 1.AV andYPbPr share oneaudio channel.
2.When HDMI 1port get DVIsignal, the "PCAudio" channelis changed toreceive the audio
for HDMI 1port.
REAR AV PASTER (L22M3)
HDMI1 INPUT
HDMI2 INPUT
AC-INPUT
Pr
Pb
Y
L
100-240V~ 50/60Hz
PC
AUDIO INPUT
AV2 IN/AV OUT
RF INPUT
R
AV
All the terminalsare (from leftto right):
AC POWER SOCKET, HDMI 1, HDMI 2, AV, YPbPr, AUDIOINPUT, VGA , PC AUDIOINPUT,
AV2 IN/AV OUT, ANTENNA.
Note: 1.AV andYPbPr share oneaudio channel.
2.When HDMI 1port get DVIsignal, the "PCAudio" channelis changed toreceive the audio
for HDMI 1port.
REAR AV PASTER (L24M3)
HDMI1 INPUT
HDMI2 INPUT
Pr
Pb
Y
L
PC
AUDIO INPUT
AV2 IN/AV OUT
RF INPUT
AV
R
All the terminalsare (from leftto right):
AC POWER SOCKET, HDMI 1, HDMI 2, AV, YPbPr, AUDIOINPUT, VGA , PC AUDIOINPUT,
AV2 IN/AV OUT, ANTENNA.
Note: 1.AV andYPbPr share oneaudio channel.
2.When HDMI 1port get DVIsignal, the "PCAudio" channelis changed toreceive the audio
for HDMI 1port.
-6-
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
ANTENNA
Note:
Aerial connections:IEC(female).
Input impendance:75 unbalanced.
PC
STEPS:
Be sure both the TV and computer are Power off.
1.Connect VGA and audio cable
2.Connect power cord
3.Power on the TV, switch to PC mode
4.Power on the PC
8
This sequence is very important.
(L19M3)
HDMI1 INPUT
HDMI2 INPUT
VGA INPUT
PC
RF INPUT
AV2 IN/AV OUT
AUDIO INPUT
AC-INPUT
100-240V~ 50/60Hz
-7-
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
8
(L22M3)
HDMI1 INPUT
HDMI2 INPUT
AC-INPUT
Pr
Pb
Y
L
100-240V~ 50/60Hz
PC
AUDIO INPUT
AV2 IN/AV OUT
RF INPUT
R
AV
8
(L24M3)
HDMI1 INPUT
HDMI2 INPUT
Pr
Pb
Y
L
PC
AUDIO INPUT
AV2 IN/AV OUT
RF INPUT
AV
R
PRESET MODE (PC)
V.Freq.(Hz)
H.Freq.(KHz)
RESOLUTION
1
2
3
4
5
800*600
60
37.88
1024*768
1360*768
(Only for 19", 22")
60
60
60
60
48.36
47.7
47.3
67.5
1280*768
(Only for 24")
1920*1080
(Only for 24")
NOTE: PC V.Freq.(Hz) not more than 60Hz.
PRESET MODE (HDMI)
V.Freq.(Hz)
H.Freq.(KHz)
RESOLUTION
1
2
3
4
5
800*600
1024*768
1360*768
1280*768
1920*1080
60
37.88
60
60
60
60
48.36
47.7
47.3
67.5
-8-
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
AV EQUIPMENT (L19M3)
This TV provides two groups of AV, one group of YPbPr for convenient connection to VCR, DVD or other
video equipment. Please refer to the owner's manual of the equipment to be connected as well.
You can use the input terminals on TV set rear as follows.
VIDEO EQUIPMENT with YPbPr
G
B
R
W
R
Y
R
W
R
B
G
Yellow (video)
Red (audio R)
White(audio L)
Red(Pr or Cr)
Blue(Pb or Cb)
Green(Y)
W
R
G
B
R
HDMI1 INPUT
HDMI2 INPUT
VGA INPUT
PC
AUDIO INPUT
RF INPUT
AV2 IN/AV OUT
AC-INPUT
100-240V~ 50/60Hz
W
R
Y
To audio
outputs
with
terminal
AV2 IN
AV OUT
VIDEO EQUIPMENT
To video
output
R
W
R
W
Y
Y
HDMI
It can be connected to the following appliances: VCR, multi disc player, DVD, camcorder, video game
or stereo system, etc.....
YPbPr can support these video fomats: 480i, 576i, 480p, 576p, 720p, 1080i, 1080p.
Note: 1.AV andYPbPr share one audio channel.
2.When HDMI 1 port get DVI signal, the "PC Audio" channelis changed to receive the audio for
HDMI1 port.
3.Sometimes it will not support in different device becausethe device supplys nonstandard signal.
4.When current source is TV, AV OUT signal is TV;when current source is AV, AV OUT signal is
AV; other sources have noAV OUT signal.
-9-
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
AV EQUIPMENT (L22M3)
This TV provides two groups of AV, one group of YPbPr for convenient connection to VCR, DVD or other
video equipment. Please refer to the owner's manual of the equipment to be connected as well.
You can use the input terminals on TV set rear as follows.
VIDEO EQUIPMENT with YPbPr
G
B
R
W
R
Y
R
W
R
B
G
Yellow (video)
Red (audio R)
White(audio L)
Red(Pr or Cr)
Blue(Pb or Cb)
Green(Y)
W
R
G
B
R
HDMI1 INPUT
HDMI2 INPUT
AC-INPUT
Pr
Pb
L
100-240V~ 50/60Hz
PC
AUDIO INPUT
AV2 IN/AV OUT
RF INPUT
R
AV
Y
W
R
Y
To audio
outputs
with
terminal
AV2 IN
AV OUT
To video
output
VIDEO EQUIPMENT
R
W
R
W
Y
Y
HDMI
It can be connected to the following appliances: VCR, multi disc player, DVD, camcorder, video game
or stereo system, etc.....
YPbPr can support these video fomats: 480i, 576i, 480p, 576p, 720p, 1080i, 1080p.
Note: 1.AV andYPbPr share one audio channel.
2.When HDMI 1 port get DVI signal, the "PC Audio" channelis changed to receive the audio for
HDMI1 port.
3.Sometimes it will not support in different device becausethe device supplys nonstandard signal.
4.When current source is TV, AV OUT signal is TV;when current source is AV, AV OUT signal is
AV; other sources have noAV OUT signal.
-10-
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
AV EQUIPMENT (L24M3)
This TV provides two groups of AV, one group of YPbPr for convenient connection to VCR, DVD or other
video equipment. Please refer to the owner's manual of the equipment to be connected as well.
You can use the input terminals on TV set rear as follows.
VIDEO EQUIPMENT with YPbPr
G
B
R
W
R
Y
R
W
R
B
G
Yellow (video)
Red (audio R)
White(audio L)
Red(Pr or Cr)
Blue(Pb or Cb)
Green(Y)
W
R
G
B
R
HDMI1 INPUT
HDMI2 INPUT
Pr
Pb
Y
L
PC
AUDIO INPUT
AV2 IN/AV OUT
RF INPUT
AV
R
W
R
Y
To au dio
outputs
with
terminal
AV2 IN
AV OUT
To video
output
VIDEO EQUIPMENT
R
W
R
W
Y
Y
HDMI
It can be connected to the following appliances: VCR, multi disc player, DVD, camcorder, video game
or stereo system, etc.....
YPbPr can support these video fomats: 480i, 576i, 480p, 576p, 720p, 1080i, 1080p.
Note: 1.AV andYPbPr share one audio channel.
2.When HDMI 1 port get DVI signal, the "PC Audio" channelis changed to receive the audio for
HDMI1 port.
3.Sometimes it will not support in different device becausethe device supplys nonstandard signal.
4.When current source is TV, AV OUT signal is TV;when current source is AV, AV OUT signal is
AV; other sources have noAV OUT signal.
-11-
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROLLER
1:POWER
To setthe TV to standby orpower on.
2:NUMBER KEY
For direct accessto channels.
3:MENU
To displaythe menu.
4:CURSOR
1
2
17
18
To move within the menu.
5:CH. LIST
To displaythe channel list.
6:VOL+/-
To adjustthe sound level.
7:PIC
To switchthe picture mode.
8:SLEEP
Set the time toturn off theTV.
19
20
3
4
5
21
22
9 10 11 12 25 26
SOURCE HOT KEYS
Switch to thesource that youwant directly.
13:Be used inprogramme edit:
23
6
Red: delete
Green: rename
Yellow:move
Blue: skip
14:FB
Fast backward key.
15:FF
Fast forward key.
7
8
24
25
26
9
10
11
12
13
16:Info
Displays or removesthe signal information.
17:MUTE
To disableor enable thesound.
18:RECALL
To accessthe previously viewedprogramme.
27
28
14
15
29
30
16
19:SOURCE
To displaysource menu.
20:OK
In menu mode, use this keyto confirm.
Insert Batteries Into the Remote Control
1
2
3
21:EXIT
Used to returnto the previousmenu or exitmenu.
22:SOUND
To switchsound mode.
23:CH+/CH-
To accessthe next orprevious TV Program.
24:ASPECT
To changethe picture aspectratio: 16:9 or4:3.
1. Remove the battery cover.
2. Inserting the 2 AAA 1.5V batteries making sure the
polarity (+ or -) of the batteries matches the polarity
marks inside the unit.
3. Mount the battery cover.
Replace with new batteries when the TV set begins
to show the following symptoms:
Operation is unsteady or erratic. Sometimes the TV
set does not function with Remote Control Unit.
27:PREV
Next key.
28:NEXT
Previous key.
29:STOP
Stop key.
Remark:
1) Alkaline Battery Recommended.
2) Remove batteries when they are exhausted or if the
remote control is not to be used for long time.
30:PLAY/PAUSE
Play / Pausekey.
-12-
Download from Www.Somanuals.com. All Manuals Search And Download.
TV OPERATION
1. CHANNELMENU
Delete
Delete
Press teletext redbutton, it willshows red delete
cursor.
The first itemof the MENUis channel menu( for
TV source only).
Youcan search channelsand edit programshere.
Press to choosethe program.
Press red buttonagain, the programwill delete.
Press
and press
to move, press OK buttonto confirm,
toadjust.
Rename
Rename
Move the cursorto the program, press teletext
green button torename the program.
Auto Tuning
ATV Manual Tuning
Programme Edit
Software Update(USB)
Press
move the cursor.
to choosethe character. Press
to
Press MENU button to exit edit, Press EXIT toexit
the menu.
Note: The TVprograms name onlycan be 5characters.
CHANNEL
<
>
Move
Move
Move the cursorto the program, press teletext
yellow button, itwill show yellowcursor, Press
to move theprogram.
1).Auto tuning:
Search all theTV channels automatically.
Skip
Skip
Press to choosethe program, pressteletext
blue button to skip this program, The icon
2). Manual tuning:
Youcan change thesound system tosearch
the TV channelsand fine tunethe channels,
then storage thechannels you selected.
will
show on the right side of the program.
Choose the skipped program, press the blue button
again, you can cancel the skip, Then the icon
disappear.
will
Manual Tuning
_
Storage To 1
+
4). Software update(USB):
Update the TVset' s software by USB.
System DK
Current CH 1
Search
2. PICTURE MENU
The second item of the MENU is PICTURE MENU.
You can adjust picture effect here, suchas contrast,
brightness, etc.
Fine-Tune
Frequency 55.25 MHz
Press
and press
to move, press OK button to confirm,
to adjust.
Save
MENU
NOTE:
Press teletext redbutton to storageto channels
after manual tuning.
Picture Mode Standard
Color Temperature
Aspect Ratio
Noise Reduction
Screen
3). Program Edit:
You can Delete, Rename, Move, or Skipany programs.
Programme Edit
PICTURE
<
>
1
2
3
NOTE:
1).Tint is availablein NTSC system only.
2).There are four color temperature modes
can be selected, such as medium, warm, cool,
and user.
3).Screen is available in PC mode only, which
can adjust horizontal position, vertical position,
size and phase.
Skip
MENU
Delete
OK
Rename
Move
-13-
Download from Www.Somanuals.com. All Manuals Search And Download.
TV OPERATION
3. SOUND MENU
The third itemof the MENUis the SOUND
MENU.
Youcan adjust thesound effect heresuch as
treble, bass, balanceetc.
OSD Language English
Restore Factory Default
Press
and press
to move, press OK buttonto confirm,
toadjust.
OPTION
<
>
Sound Mode Music
Balance
Auto Volume
EQ
NOTE:
Restore factory defaultwill clear allthe programs
and Reset allthe settings todefault value.
SOUND
<
>
6. APPLICATIONMENU
The sixth itemof the MENU is theAPPLICATION
MENU.
Note:
Auto volume: onlyavailable when theinput
signal volume istoo large ordistortion.
EQ: Amplifythe selected soundfrequency as youwish.
USB
4. TIME MENU
APPLICATION
The forth itemof the menuis the TIMEMENU
Youcan adjust theclock, power on/offtime,
sleep time etc.
<
>
Press
and press
to move, press OK buttonto confirm,
toadjust.
Press OK button to enter theUSB menu.
Clock 01/Jan 00:00
Off Time
On Time
USB 2.0
Sleep Timer
TIME
<
>
PHOTO
MUSIC
MOVIE
TEXT
NOTE:
Within 15 minutesthere is nosignal, the TV
will auto sleep.
Once you poweroff the TVset byAC, the clocktime
will be reset.
Please make sure that the USB device have plugged in
the slot. Thereare four type media item can be selected,
such as photo, music, Movie and text. Select the type
media item by pressing
the disk selection menu.
, press OK button to enter
In the movie mode, when you use FB, FF function, The
audio may be pause in several seconds to synchronize
the audio signal and video signal.
5.OPTION MENU
The fifth itemof the MENUis the OPTIONMENU.
Youcan adjust theOSD language orRestore factory
default.
In text mode, press
NOTE:
to make page up and page down.
When the USB device isn't supported, it may be that the
power of the USB device isn't enough.
-14-
Download from Www.Somanuals.com. All Manuals Search And Download.
TV OPERATION
Press
confirm the function.
to select the function icon, press OK button to
1/1
Press
NOTE:
or EXITbutton to exit the control bar.
You can adjust the audio track, subtitle, or program in
the Info menu while Playing the video file.
Choose the Info icon and press OK can display the Info
MENU.
Return
C
Sample1.ts
Press the
toselect the rightdisk and pressOK to
Resolution: 720x576
display media filesand folder listor choose Returnto
back to themedia type selectionmenu.
AudioTrack:
Subtitle:
1/2
1/3
1/6
½
Program:
1/1
Size:
30574 KBytes
Resolution: 688x412
AudioTrack: 1/2
Subtitle:
Program:
1/3
1/5
Size: 511457 KBytes
M
Sample1.ts
Close
Sample1.ts
Sample2.ts
Sample3.ts
Sample4.ts
Select the mediafile by pressing
or
, then
the preview framewill pop up. Press the button
to play themedia file infull screen. Whenthe
media file (photo, music, Movie ortext type) is
playing, press theOK or Info buttoncan display the
control bar.
Playlist
Info.
Pause Prev.
Next
Stop
Repeat ALL
Music
Music function needto put musicand picture inthe
same folder.
00:00:33/00:04:22
Info.
Pause
FB
FF
Prev.
Next
Stop
Repeat ALL
-15-
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLE SHOOTING
Trouble phenomenon
Picture
Audio
Inspection
antenna position, direction
or connection
Snow
Noise
antenna position, direction
or connection
Ghost
Normal audio
electronic equipment,car/
motorcycle,fluorescent light
Interfere
Noise
Volume(inspect wether the
mute function onthe remote
control are started, or audio
system are corrector not)
Normal Picture
Mute
Power cord is not inserted
Power switch is not opened
Contrast and brightness/volume
setup
Press standby key on the remote
control for inspecting
No picture
No color
Mute
Normal audio
color control
Normal audio
or weak
retune channel
Scramble
No color
Audio system
Noise
Special Explanation The accessories suchas remote controlis not belongs
to the guarantee
-16-
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|