HLTDC15/HLTDC19/HLTDC20
LCD TV
USER MANUAL
Please read this manual carefully
before using this TV set and keep it
for future reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
10. POWER SOURCES
This unit should be operated only from the type of power source indicated on the rating plate. If you are
not sure of the type of power supply to your home, consult your appliance dealer or local power company.
For units intended to operate from battery power, or other sources, refer to the operating instructions.
11. POWER-CORD PROTECTION
Power-supply cords shouldbe routed sothat they arenot likely tobe walked onor pinched by
items placed uponor against them, paying particular attentionto cords atplugs,convenience
receptacles, and thepoint where theyexit from theappliance.
12. LIGHTNING
Toprotect your unitfrom a lightningstorm, or whenit is leftunattended and unusedfor long
periods of time, unplug it fromthe wall outletand disconnect theantenna or cablesystem. This
will prevent damageto the unitdue to lightningand power linesurges.
13. POWER LINES
An outside antennasystem should notbe located inthe vicinity ofoverhead power linesor other
electric light orpower circuits, orwhere it canfall into suchpower lines orcircuits. When installing
an outside antennasystem, extreme careshould be takento keep fromtouching such powerlines
or circuits, ascontact with themmight be fatal.
14. OVERLOADING
Do not overloadwall outlets andextension cords, asthis can resultin a riskof fire orelectric
shock.
15. OBJECT AND LIQUID ENTRY
Do not pushobjects through anyopenings in thisunit, as theymay touch dangerousvoltage
points or shortout parts thatcould result infire or electricshock. Never spillor spray anytype of
liquid into theunit.
16. SERVICING
Do not attemptto service thisunit yourself asopening or removingcovers may exposeyou to
dangerous voltage orother hazards. Referall servicing toqualified service personnel.
17. DAMAGE REQUIRING SERVICE
Unplug this unitfrom the walloutlet and referservicing to qualifiedservice personnel underthe
following conditions:
a. When thepower-supply cord orplug is damaged.
b. If liquidhas been spilled, or objects havefallen into theunit.
c. If theunit has beenexposed to rainor water.
d. If theunit does notoperate normally byfollowing the operatinginstructions. Adjustonly those
controls that arecovered by theoperating instructions, asan improper adjustmentof other
controls may resultin damage andwill often requireextensive work bya qualified technicianto
restore the unitto its normaloperation.
e. If theunit has beendropped or thecabinet has beendamaged.
f . Whenthe unit exhibitsa distinct changein performance, thisindicates a needfor service.
18. REPLACEMENT PARTS
When replacement partsare required, besure the servicetechnician uses replacementparts
specified by themanufacturer or thosethat have thesame characteristics asthe original part.
Unauthorized substitutions mayresult in fire, electric shock orother hazards.
19. SAFETY CHECK
Upon completion ofany service orrepairs to thisunit, ask theservice technician toperform safety
checks to determinethat the unitis in properoperating condition.
20. HEAT
The product shouldbe situated awayfrom heat sourcessuch as radiators, heat registers, stoves,
or other products(including amplifiers) thatproduce heat.
21. DISC TRAY
Keep your fingerswell clear ofthe disc trayas it isclosing. It maycause serious personalinjury.
22. CONNECTING
When you connectthe product toother equipment, turnoff the powerand unplug allof the
equipment from thewall outlet. Failureto do somay cause anelectric shock andserious personal
injury. Readthe owner's manualof the otherequipment carefully andfollow the instructionswhen
making any connections.
23. SOUND VOLUME
Reduce the volumeto the minimumlevel before youturn on theproduct. Otherwise, suddenhigh
volume sound maycause hearing orspeaker damage.
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Instructions
PRECAUTIONS
FCC WARNING-This equipment may
generate or use radio frequency
energy.Changes or modifications to this
equipment may cause harmful
interference unless the modifications are
expressly approved in the instruction
manual.The user could lose the authority
to operate this equipment if an
unauthorized change or modification is
made.
CAUTION:USE OF CONTROLS OR
ADJUSTMENTS OR PERFORMANCE
OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS RADIATION
EXPOSURE.
CAUTION:VISIBLE AND INVISIBLE
LASER RADIATION WHEN OPENAND
INTERLOCK DEFEATED.DO NOT
STARE INTO BEAM.
LASER SAFETY
This unit employs a laser.Only a qualified
service person should remove the cover
or attempt to service this device,due to
possible eye injury.
LOCATION:INSIDE,NEAR THE DECK
MECHANISM.
SAVE THESE INSTRUCTIONS
Thank you for using ourHaier product. This easy-to-use manualwill guide youin
getting the bestuse of yourproduct. Remember torecord the modeland serial
number. They are onlabel in backof the unit.
Model number
serial number
Date of purchase
Staple your receiptto your manual. You will need itto obtain warrantyservice.
Download from Www.Somanuals.com. All Manuals Search And Download.
To users:
Thank you for purchasing our LCD-TV.
Before connecting the LCD-TV and turning on the power, please
read this book carefully. Please keep this book for later use.
If the unit is disabled by an electrostatic discharge, please turn off
the power to the unit and turn it back on to reset.
CONTENT
Safety Notice Items...................................................................................
Front Panel Controls..................................................................................
Connection Options...................................................................................
Remote Control Key Functions...................................................................
1
2
3
4
5
Remote Control
..................................................................................
Installing Batteries..................................................................................
5
Connection Instructions.............................................................................
Grounding..............................................................................................
External equipment Connections..............................................................
Antenna Connection.............................................................................
PC Setup.............................................................................................
VCR Setup...........................................................................................
Cable TV Setup....................................................................................
6
6
6
6
7
8
9
External AV Source Setup......................................................................
9
Basic Operating Instructions.......................................................................
10
Turn on the LCD-TV.................................................................................
10
Audio Control..........................................................................................
Mute......................................................................................................
10
10
Select the TV Channel You Want...............................................................
11
Picture Mode...........................................................................................
11
Program Scan.........................................................................................
11
Sleep......................................................................................................
11
Menu Operations.......................................................................................
Picture Menu Options...............................................................................
Picture Menu Options Continued...............................................................
Sound Menu Options................................................................................
Sound Menu Options Continued................................................................
12
12
13
13
14
Function Menu Options.............................................................................
15
Function Menu Options Continued.............................................................
16
Adjust Menu Options................................................................................
Tuning Menu Options..............................................................................
Tuning Menu Options Continued..............................................................
Parental Menu Options.............................................................................
Parental Menu Options Continued.............................................................
DVD Features..........................................................................................
Special Function Playback.......................................................................
DVD System Setup...................................................................................
25
Playable Discs.........................................................................................
29
16
17
18
18
19-21
22
24
Disc Protection and DVD Characteristics...................................................
30
Troubleshooting Guide...............................................................................
31
Specifications...........................................................................................
Warranty ..................................................................................................
32
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Notice Items
Incorrect usage may cause fire or electric shock. To prevent this, please do as
required when you are installing, using and cleaning this machine. To insure your
safety and extend the life-span of LCD-TV, please read the following items
carefully before using:
l Please read and understand all the instructions before operation;
l Please keep this manual for later use;
l Please comply strictly with the warning instructions on the machine and
in this book;
l Please comply with the instructions provided;
l Please do not use additional devices that are not recommended by
manufacturer:
l Before operation, please make sure that the operating voltage of your unit is
correct;
l Do not place the unit on unstable, dusty and humid places;
l Never put the unit in direct sunlight or near heat sources;
l Allow enough space for proper ventilation;
l Please keep water away from the LCD-TV . If water comes in contact with the
LCD-TV, disconnect the power cord from the power source, then wipe the set
with a dry soft cloth;
l Do not remove the back cover. If service is needed, please contact an
Authorized service technician.
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Panel Controls
2
3
4
5
1
TV/AV MENU VOL- VOL+ CH-
CH+ POWER
7
6
Control Panel Function
1. Power supply switch
2.TV/AV Selects the input signals: PC/COMPONENT/AV/SV/TV
3. MENU Press to select the main menu
4. VOL- Volume down / Left orientation to adjust the item in the OSD
VOL+ Volume up / Right orientation to adjust the item/Press to enter
5. CH- TV channel down / to select the item in the menu
CH+ TV channel up / to select the item in the menu
6. Power indicator
Illuminates red in standby mode, illuminates green when the display is
turned on
7.Remote Sensor
Receives the signals from the remote control
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection Options
DVD
STOP PLAY/PAUSE OPEN/CLOSE
PREW
NEXT
DVD insert
The above figure is for reference only,
connections may differ depending upon
the models
Antenna Input
Connect cable or
antenna signals to
the TV, either direc-
tly or through your
cable box.
Earphone port
PC Audio Input
AV/S-VIDEO/
COMPONENT Audio
Input
Connect the audio
output from the pc
to the audio input port
Connect audio output
from an external device
to these jacks
Video Input
Connect video output
from an external
device to this jack
S-Video Input
Connect S-Video out
from an S-Video device
to the jacks.
DVD/DTV Input
Connect a component
video/audiodevice to
these jacks
VGA Input
Connect to the VGA
15PIN analog output
connector of a PC
display card to use set
as a PC display
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control Key Functions
When using the remote control, aim it
Buttons on the remote control
towards the remotesensor on theTV
Stand By
DVD Open/close
TV/AV and input selection
Scan
POWER
SCAN
TV/AV
TV/DVD OPEN/CLOSE
RECALL
MUTE
DISPLAY
TV/DVD
Mute
Return to Previous Channel
Call Screen Display
Program Number
Select MONO,STEREO, SAP in NTSC system
CCD ( closed caption) On / Off
TV Sleep button
1
5
2
6
0
3
4
7
SLEEP
8
CCD
9
MTS/SAP
P.STD
Adjust Picture Mode
Volume/Channel Selection
MENU
CH+
VOL
-
VOL
+
MENU
Exit On Screen Display
DVD 10+
EXIT
10+
CH-
DVD STOP
STOP
REV
PAUSE/STEP
SETUP
SUBTITLE
NEXT
DVD SUBTITLE
DVD SETUP
FWD
PREV
DVD PAUSE/STEP
DVD FAST REVERSE
DVD FAST FORWARD
DVD MENU
D.MENU
A-B
SLOW
REPEAT
PLAY/ENTER
DVD Next Chapter
DVD Previous Chapter
DVD REPEAT
TITLE/PBC SEARCH
ANGLE
AUDIO
DVD PLAY/ENTER
PROGRAM
D.CALL
ZOOM
DVD A-B REPEAT
UP
DVD Cursor Move button
LEFT
DVD SLOW
RIGHT
DVD ANGLE
DOWN
DVD SEARCH
DVD AUDIO Mode
DVD TITLE/PBC
DVD PROGRAM
Zoom Function
DVD CALL
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
Installing Batteries
!
Remove the battery cover.
!
Insert two size AAbatteries matching
the +/-polarities of the battery to the +/-
marks inside the battery compartment.
Precautions
As strong light may interfere with the
signals, change yourposition to
operate the remote control if
the television cannot be turned
on or off as expected.
Make sure that there is no
obstacle between theremote
controller and televisionset.
Make sure that two AA 1.5V alkaline
batteries are loaded. The batteries
must be of the same type, must be
inserted properly, and must not be
rechargeable.
Keep the remote control
away from heat sources or
humid areas toensure
effective performance of
the remote.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection Instructions
Grounding
Ensure that you connect the grounding / earth wire to prevent possible
electric shock. If grounding methods are not possible, have a qualified
electrician install a separate circuit breaker. Do not try to ground the
unit by connectingit to telephone wires, lighteningrods, or gaspipes.
External Equipment Connections
Antenna Connection
- Antenna or Cable Service with a Cable Box Connections
- For optimum picture quality, adjust antenna direction if needed.
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
wall antenna
socket
Bronze Wire
RF coaxial wire (75 ohm)
VHF antenna
UHF antenna
Turn clockwise to tighten.
Bronze Wire
Be careful not to bend the bronze
wire when connecting the antenna.
outdoor
antenna
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
To improve picture quality in a poor
signal area, purchase and install a
signal amplifier.
If the antenna needs to be split for two
TV s, install a 2-Way Signal Splitter
in the connections.
If the antenna is not installed properly,
contact your dealer for assistance.
NOTE: Cables shown are not included with the TV
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection Instructions
PC Setup
You can use your LCD-TV as a monitor for your personal computer using a VGA
cable (not supplied).
Connection and use steps:
1.Read the userguide supplied with
your computer and ensure that it has
a VGAconnector;
2.Make sure that the power of the LCD
-TV and thePC are off;
3.Connect a Dtype 15-pin VGAinterface
cable ( not supplied ) to the VGAvideo
interface connector on the PC. Then
connect the other end to the VGA video
interface connector on the back of the
LCD-TV.Tighten the screwson the VGA
connectors once they are firmly
connected;
4.Turn on the power ofthe LCD-TV first,
and then turn on the power of the PC;
5.Press the TV/AV button to set the video
input mode ofthe LCD-TV toPC-RGB;
6.Check the image on your TV. There may be noise associated with the resolution,
vertical pattern, contrast or brightness in PC mode. If noise is present, change
the PC mode to another resolution, change the refresh rate to another rate or
adjust the brightness and contrast on the menu until the picture is clear. If the
refresh rate of the PC graphic card can not be changed,change the PC graphic
card or consult the manufacturer of the PC graphic card.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection Instructions
VCR Setup
- To avoid picture noise (interference), leave an adequate distance between the
VCR and TV
Connection and use steps:
1.Read the user guide supplied with your AV devices and ensure that it has
Composite or S-Video connectors;
2.Make sure that the power of the LCD-TV and the AV device are off;
Connection Option 1
Set VCR output switch to 3 or 4 and then
tune TV to the same channel number.
Connection Option 2
1. Connect the audio and video cables from
the VCR's output jacks to the TV input jacks,
as shown in the figure.
When connecting the TV to VCR, match
the jack colors (Video = yellow,Audio
Left = white,and Audio Right = red).
If you connect an S-VIDEO output from
VCR to the S-VIDEO input, the picture
quality is improved; compared to conne-
.
cting a regular VCR to the Video input.
2. Insert a video tape into the VCR and press
PLAY on the VCR. (Refer to the VCR owner
manual.)
s
3.Turn on the power of the LCD-TV first ;
and then turn on the power of the AV
device;
4.Press the TV/AV button to set the video
input mode of the LCD-TV to S-VIDEO
mode or AV mode.
1
2
VCR
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection Instructions
Cable TV Setup
- After subscribing to a cable TV service from a local provider you can watch cable
TV programming. The TV cannot display TV programming unless a TV tuner
device or cableTV converter box is connectedto the TV.
- For furtherinformation regarding cableTV service, contact your localcable TV
service provider(s).
Connection Option 1
1. Select 3or 4 withchannel switch oncable
box.
2. Tunethe TV channel to thesame selected
output channel oncable box.
3. Select channelsat the cablebox or with
the cable boxremote control.
Connection Option 2
1. Connect theaudio and videocables from
the Cable Box'soutput jacks tothe TV
input jacks, asshown in thefigure.When
connecting the TV to aCable Box, match
the jack colors
(Video = yellow, Audio Left =white, and
Audio Right= red).
2. Select theinput source byusing the TV/AV
button on theremote control.
3. Select yourdesired channel withthe
remote control forcable box.
External AV Source Setup
How to connect
Connect the audioand video cablesfrom
the external equipment'soutput jacks tothe
TV input jacks, as shown inthe figure.
When connecting theTV to external equip-
ment, match thejack colors (Video = yellow,
Audio Left =white, andAudio Right =red).
How to use
1. Select theinput source byusing the TV/AV
button on theremote control.
2. Operate thecorresponding external equi-
pment. Refer toexternal equipment ope-
rating guide.
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operating Instructions
Turn on the LCD-TV
POWER
TV/AV
TV/DVD OPEN/CLOSE
When the POWER
button is pressed and the LCD-TV
SCAN
RECALL
DISPLAY
MUTE
is turned on, the indicator light on the front of the LCD-TV
changes from red to green. When the LCD-TV is turned off
using the power button, the LCD-TV will go into standby
mode and the indicator light turns red.
1
5
2
6
0
3
4
7
SLEEP
8
CCD
9
MTS/SAP
P.STD
CH+
VOL
-
VOL
+
MENU
EXIT
10+
CH-
Note:
The display of the input mode
will disappear in3 seconds.
PC
STOP
REV
PAUSE/STEP
PREV
SETUP
FWD
SUBTITLE
NEXT
TV
D.MENU
REPEAT
A-B
SLOW
PLAY/ENTER
ANGLE
AUDIO
TITLE/PBC SEARCH
PROGRAM
D.CALL
ZOOM
COMPONENT
AV
SV
Switch Among Different Inputs: TV / PC / COMPONENT / AV / SV
Each time you press the TV/AV button, TV, PC, COMPONENT, AV, SV,
will appear on the screen in order.
Audio Control
1.Press the VOL+ button to increase the volume. A number will appear
on screen indicating the volume level.
2.Press the VOL- button to decrease the volume. A number will appear
on screen indicating the volume level.
30
Mute
1.Press the MUTE button to mute the sound temporarily. A mute icon
appears on the screen.
2.Press the MUTE button or VOL+/VOL- again to restore the sound.
The mute icon disappears.
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operating Instructions
Select the TV Channel You Want
You can use the number keys on the remote control to directly select TV
channels.
The LCD-TV can store up to 181 channels , and you can press the keys on the
remote control or on the panel to make a selection.
Picture Mode
Press P.STD button on the remote control for menu display . For desired mode as
follows:
PERSONAL STANDARD MILD FRESH
Program Scan
Press SCAN button to scan through all the memorized TV channels. The scan
will pause for about 2 seconds on each channel .
If you want to stop the function during auto scanning, simply press the SCAN
button again .
Sleep
Press SLEEP button to set the time : SLEEP 240-SLEEP 180-SLEEP 120
-SLEEP 90-SLEEP 60-SLEEP 45-SLEEP 30-SLEEP 15-SLEEP OFF
This feature allows you to turn off the television after a pre-selected
number of minutes
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Operations
* In this manual, the OSD (On Screen Display) may be differ from your TV
These are examples to illustrate the TV's operation.
Press TV/AV to select the input source. The menu for each source is
different .
1. Press MENU button to display the main menu, and VOL+/VOL-to select the
main menu .
2. Press CH+/CH- to scroll through the parameters
3. Press VOL+/VOL- buttons to make changes to the parameters
4. Press the EXIT button to exit the menu
Picture Menu Options
Picture quality can be adjusted for any input separately .
The picture qualityon the screencan be adjustedas follows:
1. Press MENU button and VOL+/VOL- until the followingmenu appears
on the screen.
PC/COMPONENT MENU
PICTURE
BRIGHTNESS
CONTRAST
SHARPNESS
COLOR TEMP
30
30
2
Not available incomponent
COOL
30
TV/AV/SV MENU
PICTURE
BRIGHTNESS
CONTRAST
SHARPNESS
COLOR
50
50
2
50
50
HUE
Only available inNTSC system
Note: Symbols ontop of themenu in thismanual may differ from theactual set display
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Operations
Picture Menu Options continued
2. Press CH+/CH- button to enter the picture menu and to go up and down to
select the desired option .
3.Press VOL+/VOL- button to increase and decrease the level to adjust the
selected option to your preference .
4. Repeat step 2 and step 3 until desired picture quality has been achieved .
Function:
BRIGHTNESS :Adjust the brightness of the picture . By increasing the level, it
will lighten the dark parts of the picture and by decreasing the level it will
darken the lighter parts of the picture.
CONTRAST : Adjust the contrast of the picture . The contrast becomes higher as
the number increases.
SHARPNESS : Adjust the amount of the detail enhancement , the image
sharpness rises as the number increases (By increasing the level, it will show
cleaner and clearer images and by decreasing the level, it will make the picture
smoother).
COLOR : Press VOL+/VOL- to adjust the color
HUE : Adjust the tone of the picture . This will appear and can be adjusted only in
NTSC mode
COLOR TEMP : Press to select the color temperature from WARM/NEUTRAL/COOL .
Sound Menu Options
Sound can be adjusted for any input as follows:
1. Press MENU and VOL+/VOL- button until the following menu appears on
the screen
SOUND
50
50
30
70
VOLUME
BALANCE
BASS
TREBLE
AUDIO MODE
AVL
VOICE
OFF
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Operations
Sound Menu Options continued
You can adjust sound options to the levels you prefer.
2. Press CH+/CH- button to enterthe audio menuand to goup and downto
select the desired option .
3.Press VOL+/VOL- button to increase and decrease the level to adjust the
selected option toyour preference .
4. Repeat step2 and step3 until desiredsound quality hasbeen achieved ..
Function :
VOLUME :Adjust the volumeof your TV
BALANCE : Adjust the balanceof the audiooutput from leftto right . When
indication value of balance increases toward +50 , sound from the left speaker
becomes weaker . When indication value of balance decreases toward -50 ,
sound from the right speaker become weaker .
BASS : Adjust the bass of the sound . Can only be adjusted under PERSONAL mode .
TREBLE : : Adjust the treble of the sound . Can only be adjusted under PERSONAL
mode .
AUDIO MODE : Press VOL+/VOL- to select amongPERSONAL, VOICE, MUSIC
and THEATRE .
AVL: Automatic Volume Limit Control reduces the effect of high volumes by
limiting the same volume peaks across all channels .
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Operations
Function Menu Options
Menu Language Selection:
The OSD menus can be shown onscreen in the various languages. First select the
system language.
1. Press MENU button and VOL+/VOL- until the followingmenu appears
on the screen.
FUNCTION
INPUT SOURCE
LANGUAGE
CC MODE
TV
ENGLISH
OFF
BLUE SCREEN
RESET
ON
2. Press CH+/CH- button to enterthe function menuand to goup and downto
select the desired option .
3.Press VOL+/VOL- button to increase and decrease the level to adjust the
selected option toyour preference .
4. Repeat step 2 and step 3 until desired settings have been achieved .
Functions:
1. INPUT SOURCE : Display current mode . There are DVD, PC, COMPONENT ,
AV , SV ,TV to display .
2. LANGUAGE :Press VOL+/VOL- to select the OSD language.
3. CC MODE:Press VOL+/VOL-buttons to selectthe Closed Captionoptions.
Closed Captioning helpsthe hearing impairedwith the broadcastprogram,
as well as helping children learn how to read. A builtin decoder displays the
audio portion of a program as text on the screen when this option is selected.
OFF: When OFFis displayed onTV, it means CC MODE isturned off.
CC1: When CC1is displayed on TV means CC MODE is turned on.
CC2 to CC4: For other modes of video related broadcast information.
TT1: For program guide andother information displayedby broadcasters.
(This blocks alarge portion ofthe picture onyour screen).
TT2 to TT4 :For other modes ofinformation displayed bybroadcasters.
(This blocks a large portionof the picture on yourscreen).
IMPORTANT: Closed captioningavailability entirely dependson broadcasters
supplying the signal. Therefore, closed captioning might not always be
available and languageavailability will differ by broadcast.
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Operations
Function Menu Options Continued
Note: Select CC1 for full translation of the primary language such as English in
your area. Select CC2 for secondary language translation such as French or
any other language that may be broadcast in your area.
4.BLUE SCREEN: Press VOL+/VOL- to select ON or OFF. To set ON, the screen
will turn blue after 3 seconds if there is no signal.
5. RESET : Press VOL+ to reset some settings to the factory default .
Adjust Menu Options
1. Press MENU and VOL+/VOL- button until the following menu appears on the
screen
ADJUST
AUTO CONFIG
PHASE
CLOCK
H POSITION
V POSITION
0
50
50
50
Note: This menu appears only in PC mode .
2. Press CH+/CH- button to enter the adjust menu and to go up and down to
select the desired option .
3.Press VOL+/VOL- button to increase and decrease the level to adjust the
selected option to your preference .
4. Repeat step 2 and step 3 until desired quality has been achieved ..
Functions:
AUTO CONFIG : Automatically adjusts picture location frequency and phase
parameters .
PHASE : Removes any horizontal distortion and clears or sharpens the displayed
characters .
CLOCK : Adjust the TFT-LCD to match the PC input source clock frequency
H-POSITION : Picture horizontal position adjust
V-POSITION : Picture vertical position adjust .
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Operations
Tuning Menu Options
1. Press MENU and VOL+/VOL- button until the following menu appears on the
screen
TUNING
CHANNEL
SKIP
AFC
1
OFF
ON
FINE TUNE
ANTENNA
AUTO PROGRAM
CATV
Note: This menuappears only inTV mode .
2. Press CH+/CH- button to enter the tuning menu and to go up and down to
select the desired option .
3.Press VOL+/VOL- button to increase and decrease the level to adjust the
selected option to your preference .
4.Repeat step 2 and step 3 until desired settings have been achieved .
Functions:
1. CHANNEL : Press VOL+/VOL-to go up and down to set the channel position.
The display will show the current playing channel.
Channel Coverage by Antenna:
Antenna Type
VHF
UHF
Channel Range
2-13
14-69
CATV
1-125
2.SKIP : If you want skip a channel , press VOL+/VOL- to select ON , and this
channel will be skipped next time when you press CH+/CH- . You can press
the digit buttons to select the channel . If you want to restore the channel , select
OFF.
3. AFC : Auto frequency control. Select ON toimprove image quality .
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Operations
Tuning Menu Options Continued
4. FINE TUNE : If the image and / or sound received is not very good , you can
press CH+/CH- to select FINE TUNE in the menu. Then , press VOL+/VOL-
button to adjustand improve theimage quality. Do notuse this featureunless
reception is poor.
5. ANTENNA: Press VOL+/VOL- button to selectAIR (VHFand UHF) andCATV
reception preference.
6. AUTO PROGRAM : Auto search and program channels .Press the VOL+ button
to start the automatic search function operation. All channels now available
will be automatically preset in order .After the search has finished,
the first program number will display on the screen. This search automatically
adds only the active channels in your area to the TV's memory. It deletes any
channels on which there is no broadcast or a poor signal.
Note: The AUTO PROGRAM function will scan the channels on the selected
antenna input. If the TV is connected to cable, please select CATV under
' ANTENNA ' sub menu.
Parental Menu Options
1. Press the MENU and VOL+/VOL- button until thefollowing menu appears
on the screen .
2. Press CH+/CH- button to select PASSWORD .
PARENTAL
PASSWORD
----
3. Then input the password0000. It will bring parental menu display on the
screen. You will see the ollowing menu on your screen:
PARENTAL
CHILD LOCK
MPAA
PG RATING
PG CONTENTS
CAN. ENGLISH
CAN. FRENCH
CHANGE PASSWORD
OFF
PG
TV-14
--DV--
C8+
8+
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Operations
Parental Menu Options Continued
This function enables you to block certain TV channels in accordance to the
requirements established by the FCC.
2. Press CH+/CH- button to enter the PARENTAL menu and to go up and down to
select the desired option .
3.Press VOL+/VOL- button to go into PG RATING and MPAA
Press VOL+/VOL- button to setthe CHILD LOCK ON and PARENTAL LOCK OFF.
4. Repeat step 2 and step 3 until desired quality has been achieved .
CHILD LOCK: Child Lock off means the lock function is turned off . If the
Child Lock is in "off" mode then function will not be active to accept the
Parental Guidance signal. Child Lock on means the lock function is turned on. If the
lock is in the "on" mode then it actively accepts the Parental Guidance signal.
MPAA: When MPAA rating is selected, you can select OFF/G/PG/PG-13
R/NC17/X .
PG RATING:Select the TV Rating option. You can select from OFF/TV-Y/TV-Y7/
TV-G/TV-PG/TV-14/TV-MA.
PG CONTENTS: Press to set the grade of the program . When there is this
grade of program , this program will not be display .
CAN. ENGLISH: Select this option. You could select from OFF/E/C/C8+/G/PG/
14+/18+ .
CAN. FRENCH: Select this option. You could select from OFF/E/G/8+/13+/16+/
18+ .
CHANGE PASSWORD: The "Default Password" preset by the manufacturer is
"0000" . Ifyou want to change the preset password to your own password, just
choose any four digits that can be easily remembered and set. Once you set
password for a particular channel, that channel will be blocked.
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Operations
Parental Menu Options Continued
PARENTAL LOCK TECHNOLOGY:
The "P.L. Technology" allows you to use U.S. and Canadian Movies and TV
PROGRAMS Guide ratings to block certain types of TV programs and movies.
To clearly understand TV program rating codes, read the following information:
U.S. TV Program Ratings
NR: Not Rated-this means that programs are not rated or rating does not apply.
TV-Y: For all children - these types of rated programs are designed for a very young
audience, including children from ages 2-6.
TV-Y7: Directed towards older children - this type of rated programs may include
comedic violence of mild physical, or may frighten children under the age of 7.
TV-G: General audience - these types of rated programs contains little or no
violence, no strong language, and little or no sexual dialogue and situations.
TV-PG:Parental Guidance Suggested-this type of rated programs may contain
limited violence, some suggestive sexual dialogue and situations, and rare
language.
TV-14: Parents strongly cautioned-these types of rated programs may contain sexual
content, strong language and more intense violence.
TV-MA:Mature audience only these types of rated programs may contain sexual
violence, explicit sexual content and profane language.
FV: This type of rated programs contain Fantasy and cartoon violence.
Violence: This type of rated programs contain violence.
S:
L:
D:
This type of rated programs contain sex.
This type of rated programs contain offensive language.
This type of rated programs contain dialogue with sexual content.
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Operations
Parental Menu Options Continued
To understand clearly about movie rating codes, read the following list:
U.S. Movie Rating Chart
NR: This means movie is not rated yet. It is pending government rating approval.
G:
General Audience-this type of movie rating means all ages admitted to see
the movie.
PG-13:Parents Strongly Cautioned - this type of movie rating means some material
may not be appropriate for children under13.
R:
Restricted- This type of movie rating means children under 17 of age require
to be with parent or guardian.
NC-17:This type of movie rating means no one 17 and under admitted.
X: This type of movie rating means adults only.
To clearly understand Canadian program rating codes, read the
following list:
Canadian English Rating Chart
E: These types of programs are exempt from the rating system. Exempt
programming includes: news, sports, documentaries, talk shows, music
videos, and variety of other programs.
C: This type of programming is intended for children under age 8. There is no
offensive language, nudity or sexual content.
C8+:These types of rated programs are generally considered acceptable for children
8 years and over. There is no profanity, nudity or sexual content.
G: These types of rated programs are generally suitable for all audiences.
PG: Parental Guidance Suggested -in these types of rated programs, some material
may not be suitable for children.
14+: In these types of rated programs, some content may not be suitable for viewers
under the age of 14.Parents are strongly cautioned not to have their children
view 14+ rated programs by pre-teens and early teens.
18+: Adults Only-these types of rated programs are only for adult viewers only.
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Features
Basic Playback
Preparations
Stop playback
1. Press STOP
button to go to stop mode, the TV
Press the TV/DVD button on the remote control or
the TV to enter the DVD status.
screen will show the start logo. With some discs,
such as DVD or CDs, the player can resume
playback from the point where it was stopped.
2. Press PLAY/ENTER to resume playback from the
location where the playback was stopped.
3. Press STOP twice to stop completely.
Basic playback
1. Press OPEN/CLOSE to open the disc tray,
place a disc in the disc tray. If there is no disc
placed on the disc tray in DVD mode, OPEN will
display on the screen all the times)
There is only one disc size . Place the
disc in the guide on the disc tray. If the
disc is out of the guide, it may damage the disc
and cause the DVD player to malfunction.
Do not place a disc which is unplayable in this
DVD player.
Previous and Next
During Playing, pressing the PREV
keywill
restart the currentchapter and skip chapters
backwards with each subsequent press until the
start of thedisc is reached.
Each press ofNEXT key duringplaying will
skip the currentchapter and play the next one.
2. Press OPEN/CLOSE to close the disc tray, the
playback will automatically start.
Some discs do not start automatically. Press
PLAY/ENTER tostart playback.
Fast forward and Fast reverse
3. Some discs may start playback with a menu. Use
the cursor buttons on the remote control to select
menu options and press PLAY/ENTER to start. You
may also press the digit buttons to select a menu
option directly. Many DVDs will not allow this during
start-up.
1. Press FWD
to fast forward through the disc.
button is pressed, the
Each time the FWD
fast forward motion speed changes.
2. Press PLAY/ENTER to resume normal playback.
3. Press REV
to fast reverse through the disc.
button is pressed, the
Each time the REV
Pause playback
fast reverse motion speed changes.
4. Press PLAY/ENTER to resume normal playback.
1. Press PAUSE/STEP to pause playback (still mode).
The sound will be muted during still mode.
2. Press PLAY/ENTER to resume normal playback.
Single step playback
1. When paused, press PAUSE/STEP continuous
to single step forward to the next frame in the
video.
2. Press PLAY/ENTER to resume normal playback.
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Features(Continued)
Advanced Playback
IMPORTANT NOTE:
ALL DESCRIBED FUNCTIONS AFOR DVD DISCS. IF YOU PLAY OTHER DISC
FORMATS THE OPERATION AND ON SCREEN DISPLAY WILL BE DIFFERENT.
PROGRAM
SUBTITLE
Press " SUBTITLE ", the screen will display "SUBTI-
TLE 01/XX XXXXX", "01" indicates the ordinal
number of this language; "XX" indicates total number
of language; "XXXXXX" indicates the language of
country. (the number of language depends on disc).
This function can select up to 32 languages display-
ed on screen.
When playing discs, press "PROGRAM" to enter
program mode. Press the digit buttons to select the
program number that you want. When finished move
the cursor to select "START" . This will start the
program playback.
SEARCH
REPEAT
Press "SEARCH" once to display the search
menu. Press the button again to select. Press
the program number buttons to input the item
you require. Press PLAY/ENTER to confirm.
Press " REPEAT " and Chapter repeat will be
displayed on screen, the second press will display
Title repeat, the third press will display All repeat,
the fourth press will cancel this function.
SLOW
A-B
Press SLOW to play a disc in slow motion. Each
time the SLOW button is pressed, the slow
motion speed changes.
Press " A-B " to begin start-point, press again
to set an end point and complete setting. The
selected section A-B will be repeated. The third
press will cancel this function.
Press PLAY/ENTER to resume normal playback;
Note: This function dose not work for CD and MP3.
ANGLE
TITLE/PBC
When enjoying sports, concert or theatre, press this
key to watch same actions in different angles. (Valid
for discs possessing this function. Using a disc
recorded in multi-angle you can view the scene from
different angles,for example,front, side, whole view
and exterior scene).
With some DVD discs pressing this key will display
the title menu. You can then use the digit buttons
to select the item you prefer.
AUDIO
D.MENU
Press this key can change the mode of audio.
such as: Audio 1/2: AC 3 2 CH English
Audio 2/2: AC 3 5.1 CH English
Press this key to display the root menu, select
items according to your preference. (This
function will work on a DVD with a multi-layer
menu.)
Press this button to cycle between Mono Left, Mono
Right, Mix-Mono and Stereo.
Note: When press this button continuously, you must
allow a 3 second interval between selections.
D.CALL
Pressing this key will cycle through "Title Elapsed",
"Title Remain", "Chapter Elapsed", "Chapter Remain"
and "Display off ".
Download from Www.Somanuals.com. All Manuals Search And Download.
Special Function Playback
JPEG DISC PLAYBACK
When a disc containing standard JPEG picture files is inserted into the player, a
navigation menu will be displayed automatically. Use theUP and DOWN cursor
buttons to select a file then press PLAY/ENTER. The slide show will commence.
Press PREVIOUS or NEXT to move between pictures. Press pause to stop on the
current picture. Press PLAY/ENTER to resume normal playing.
A JPEGdisc contains JPEG (.jpg) format picture information that can be decoded
by a micro-computer software and displayed through the video output interface or on
the television screen.
This function has many applications. For example one can save files from a scanner
or digital camera in the JPEG format, record these on a CD-R disc and present them
to an audience through this player.
The JPEG format is a convienient method to store images in a small amount of
memory space, and is ideal for archiving information.
MP3 PLAYBACK
When playing anMP3 disc, anavigation menu willbe displayed automatically. In themenu, use UP
or DOWN cursorbuttons to choosethe folder, then press PLAY/ENTER to enterthe folder. Use the
UP and DOWNcursor buttons toselect the fileand press PLAY/ENTER. Pressing theLEFT cursor
button will takeyou to theprevious screen/menu.
SCREEN SAVER FUNCTION
This unit employs a screen savermode to helpprotect the tubeduring static videopictures. This can
be turned offon the GENERALSETUP PAGE.
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD System Setup
DVD System Setup
General Setup Process
1.Press the SETUP button, the
General Setup Page,Preference
Page will be displayed in turn.
SETUP
..General Setup Page..
.
3:Ps
.
3:Lb
Tv Display
Angle Mark
Osd Lang
Caption
LB
4
On
4
2.Press to select, the
or
item, then press to enter the
submenu.
ENG
On
16
9
Screen Saver Off
PLAY/ENTER
or
3.Press to select then
press PLAY/ENTER to confirm.
4.Press EXIT or press SETUP
repeatedly to exit the set-up
menus.
..Preference Page..
Parental
Password
Default
1 Kid Saf
2 G
3 Pg
4 Pg 13
5 Pgr
6 R
7 Nc17
8 Adult
General Setup Page
ASPECT RATIO DESCRIPTION
When using the DVD with the internal TV,
select 4 3/LB.
..General Setup Page..
The following information applies only
when the DVD output is connected to an
external TV.
.
3:Ps
.
3:Lb
Tv Display
Angle Mark
Osd Lang
Caption
LB
4
On
4
ENG
On
16
9
SETUP
Screen Saver Off
4:3/PS (PS = Pan and Scan)
You may select if you have a normal aspect
ratio (4:3) TV, although the NORMAL/LB
(letter box) is a more common choice. In PS
mode, widescreen material will fill the screen, but at the expense of chopping
off extreme left and right edges of the original film picture. For this feature to
work, the disc must be specially coded. Such discs are uncommon.
4:3/LB (LB = Letter Box)
PLAY/ENTER
You may select this if you have a normal aspect ratio (4:3) TV. Widescreen
material will be shown in pure unaltered form, allowing the entire picture area
of the original film to be viewed without any side cropping. Black bars will
appear above and below the picture.
16:9
You may select this if you have a widescreen (16:9) TV. Back bars may still
appear above and below the picture even if using a widescreen TV. This is
because some film directors prefer to use ultra widescreen aspect ratios e.g.
2.35:1. This will normally be indicated on the DVD packaging.
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD System Setup(Continued)
DVD System Setup
General Setup Page
..General Setup Page..
Tv Display
Angle Mark
Osd Lang
Caption
LB
On
ANGLE MARK: Users can select a particular
.
camera angle when playing a DVD which offers
On
Off
ENG
On
multiple angles.
This item allows you to set Angle Mark ON or OFF.
Screen Saver Off
..General Setup Page..
On Screen Display (OSD) Language: Users
can select on-screen display language.
Tv Display
Angle Mark
Osd Lang
Caption
LB
On
ENG
On
English
Spanish
Screen Saver Off
..General Setup Page..
Tv Display
Angle Mark
LB
On
CAPTION: This function allows you to display or
hide the caption.
Osd Lang
Caption
ENG
On
On
Off
Screen Saver Off
..General Setup Page..
SCREEN SAVER: If the screen saver is on, then
there will be an animated picture of DVD on the
screen whenever the DVD player is idle for more
than 3 minutes .
Tv Display
Angle Mark
LB
On
Osd Lang
Caption
ENG
On
Screen Saver Off
On
Off
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD System Setup(Continued)
DVD System Setup
Preference Page
The Preference Page is only available when there is no disc
in the player. These settings are applied consistently to all
discswhichareinsertedandplayed.
SETUP
PARENTAL: The parental
control function works in
..Preference Page..
1 Kid Saf
2 G
3 Pg
4 Pg 13
5 Pgr
6 R
7 Nc17
8 Adult
Parental
conjunction with the
different censorship classes
assigned to DVDs. These
classes help to control the
Password
Default
PLAY/ENTER
types of DVDs that the family
watches, There are up to 8
censorship classes for DVDs.
Note:
1 To change this setting you must enter your password.
(Initial password is 1234)
2 When set to OFF, all discs may be viewed.
PASSWORD CHANGE:
You can change your password by
entering 4 digits. You must confirm
the 4 digits before the new password
can be accepted.
SETUP
..Preference Page..
Parental
Password
Default
Change
PLAY/ENTER
Old Password
New Password
Confirm Pwd
NOTE:If you forgetyour password
or a password is accidentally set
enter 1369 as the password. This
will enable you to regain control.
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD System Setup(Continued)
DVD System Setup
DEFAULT: Resets all settings
SETUP
..Preference Page..
(except password and parental
lock status) for this DVD player
back to the manufacturers
original settings. Press ENTER
to perform the reset.
Parental
Password
Default
Reset
PLAY/ENTER
Note:
Some functions may not be available depending on the type of disc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Playable Discs
The following discs can be played:
You cannot play discs other than those listed above.
You cannot play non-standardized discs, even if they may be labelled as above.
The performance of CD-R or CD-RW disc depends on the way the disc was burned. In a few cases,
their performance may not be consistant or may not even operate at all.
This DVD Playeris designed andmanufactured according tothe Region Management
Information that isrecorded on aDVD disc. Ifthe Region numberdescribed on theDVD disc
does not correspondto the Regionnumber of thisDVD Player, this DVD playerwill not play
that disc.
This Region numberof this DVDPlayer is .
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Protection and DVD Characteristics
Compare DVD disc with other discs:
DVD
LD
SVCD
VCD
CD
Digital/
MPEG I
Encode
method
Digital/MPEG
Digital
Digital
Analog
Single- Double Single- Double-
side
-side
side
side
650MB
650MB
650MB
Capacity
single- single double- double-
layer
4.7G
-layer layer
layer
17G
8.5G
9.4G
Single-side
60 minutes
double-side
120 minutes
133
minutes minutes minutes minutes
242
266
484
45 minutes 74 minutes 74 minutes
Playing Time
Disc diameter
12cm
30cm/20cm
12cm
12cm
12cm
No more than
430 line
Horizontal
resolution
No more than No more than
More than 500 line
350 line
250 line
Picture
proportion
One kind
One kind
Multiple kinds
32 kinds
One kind
16 kinds
at most
Subtitle
4 kinds
4 kinds
at most
4 kinds
at most
Language
2 kinds
2 kinds
8 kinds
48KHz, 96KHz/
6, 20, 24bit
44.1KHz/
16bit
44.1KHz/
16bit
44.1KHz/
16bit
44.1KHz/
16bit
Sound quality
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting Guide
To assist in location possible faults use help guide below.
Troubleshooting
Verify ifthe television isproperly plugged in.
Verify ifthe television isproperly supplied withpower.
Verify thatelectricity is available.
No picture, no sound
Verify if correct signals are input.
Press TV/AV button to change signal input to TV input.
Restart the television of power supply is interrupted.
Blank screen
Press MUTE buttonand verify ifMute mode ison.
Switch to anotherchannel and verifyif the sameproblem
happens.
No sound
Press VOL+ buttonto see ifthe problem canbe solved.
Verify ifsound system isfunctional. Refer tochapter on
adjusting.
Poor sound
Verify ifcorrect channel isselected.
Adjust the antenna.
Make adjustments byFINE TUNE
No picture in some
channel
Verify if the same problem exists in other channels.
Check picture and sound systems.
Refer to relative instructions in the Manual for color
adjust.
No color for some channel
program (black and white)
Verify ifthe antenna iscorrectly connected.
Verify ifthe antenna isin good condition.
Make fine adjustmentof channel.
Spots with some or
all pictures
Disconnect the televisionfrom power supplyand, 10
seconds later, reconnect to thepower supply.
If the problemstill exists, contactan authorized
service depot fortechnical assistance.
Abnormal functioning
Note:
1.If the fault can not be repaired using the above guide consult with your local authorized
service center.
2.The TV set must only be repaired by a qualified registered service person. Never attempt to
remove the backcover as theTV set has dangerous voltageslevels inside thatmay be
fatal or causefire.
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Specifications of the television that you have just purchased may
vary from the information in this table due to technical innovations.
Model
HLTDC15
HLTDC19
NTSC-M
HLTDC20
Picture, sound
system
Audio output
1.5W+1.5W
AV input PC input S-VIDEO input PC audio input
Headphone output YPbPr input Antenna input
External input port
~120V 60Hz
Power requirements
Power consumption
Temperature
60W
80W
80W
Working:+5 ~+35
Storage:-10 ~+45
Remote control
Batteries
User manual
Warranty card
Accessories
NOTE
Design and specifications are subject to change without notice.
Dimensions quoted in this manual are approximate.
Download from Www.Somanuals.com. All Manuals Search And Download.
Warranty
Warranty
One year parts
and Labor Carry in for 27" or less and in home for
32" and above .
Download from Www.Somanuals.com. All Manuals Search And Download.
V0.1
0090508051C
Download from Www.Somanuals.com. All Manuals Search And Download.
|