TFT-LCD TV
OWNER'S MANUAL
Please READ this manual carefully before
operating your TV, and retain it for future
reference.
MODELS:
HL37E
HL42E
HL47E
HL52E
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
Read all of the instructions before using this appliance. When using this
appliance, always exercise basic safety precautions, including the following:
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer`s instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. Apolarized plug has two blades
with one wider than the other. Agrounding type plug has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
PORTABLE CART WARNING
(symbol provided by RETAC)
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer,
or sold with the apparatus. When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of
time.
14) Refer all servicing to qualified service personnel. Servicing is required when the
S3126A
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15) WARNING-To Reduce The Risk Of Fire Or Electric Shock, Do Not Expose This Apparatus To Rain Or Moisture.
Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases,
shall be placed on the apparatus.
The apparatus shall not be exposed to dripping or splashing and that no objects filled
with liquids, such as vases, shall be placed on the apparatus.
The mains plug is used as the disconnect device, remain it readily operable during the
apparatus normal use.
Owner s Manual 3
Download from Www.Somanuals.com. All Manuals Search And Download.
SAVE THESE INSTRUCTIONS
Thank you for using our Haier product. This easy-to-use manual will guide you in
getting the best use of your product. Remember to record the model and serial
number. They are on label in back of the unit.
Model number
serial number
Date of purchase
Staple your receipt to your manual. You will need it to obtain warranty service.
4
TV LCD-TFT
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Contents
Time Menu
Warnin g . . . . . . . .............. . . . . . . . . . . . . . . . . . . . . . . .
Saf ety I nst ruc tio ns . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
Introduction
Con tro ls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...............
Connection Options . . . .. . .. . .. . .. . .. . .. . .............
Universal Remote Controller. ............ .. . .. . .. ......
Installation
Date /Time setting...................................................
Timer on setting......................................................
Timer off setting......................................................
Sleep Timer setting.................................................
Time zone setting...................................................
Daylight Saving setting...........................................
Function Menu
Acc ess ori es . . . . . . . . . . . . . . . . . . . . . . . . . . . . ............
Antenna Connection . . . .. . .. . ...............................
VCR Connection. . . . .. . .. . .. . .. . .. . .. ............... ..
External A/V Source Setup . . . ... . .. . ......................
DVD Connection . . . .. ...... .. . .. . .. . .. . .................
DTV Connection.....................................................
Digital Audio Output . . . . .. . .. . .. . .. . .. . ...............
PC Connection. . . . .. . .. . .. . . . . .. . .. . .................
Monitor Out Setup . . .. . .. . .. . .. . .. . .. . ................
HDM I . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..................
Cable Sample.........................................................
Connecting Headphones . . . .. . .. . .. . .. . .. . ........ .
Pow er so urc e.. .............. . . . . . . . . . . . . . . . . . . . . . . . . .
Operation
Closed Captions.....................................................
CC mode...............................................................
NTSC Caption........................................................
DTV Caption..........................................................
DTV Caption Style..................................................
OSD Timeout.........................................................
Blue screen...........................................................
OSD transparency..................................................
Adjust Menu
Screen Setup for PC mode......................................
Lock Menu
Parental Control ratingand categories......................
Others Functions
Bri ef In fo. . . . . . . . . . . . . . . . . . . . . . . . . . . . . ........... . .
Quick program view................................................
Setting up your remote control ................................
USB system .......................................................
Switching On/Off the TV set . . . . . ... . . . . . . . . . . .......
Choose the Menu Language . . . . ............................
Choose the input Source.........................................
Channel Menu
Automatic Scan. . . . .. . .. . .. . .............................. .
Man ual S can . . . . .............. . . . . . . . . . . . . . . . . . . . . .. .
Fine Tune................................................................
Edi t Pro gra m............... . . . . . . . . . . . . . . . . . . . . . . . . ..
Rename .............. . . . .. . .. . .. . .. . .. . .. . .. . ..........
Select the desired program. . .. . ........... ............ . . ..
Select the desired sound . . .............. . . ............. . . ..
Mute .............. . . . ............................................ . . ..
Video Menu
Maintenance . . ...... . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Product Specifications . . . . . . . . . . . . . . . . . . . . . . .. .
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . .
Warranty . . . . ............. . . . . . . . . . . . . . . . . . . .. . . . . . .
How to select picture modes.....................................
How to customize your own picture status .................
Asp ect R ati o Con tro l . . . . . . . . . . . . . . . . . . . . ... . .. . . ..
Audio Menu
How to select audio modes......................................
How to customize your own audio status ..................
SAP Broadcasts Setup............................................
Owner s Manual 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Controls
-This is a simplified representation of front panel.
-Here shown may be somewhat different from your TV.
Front panel controls
POWER
-
MENU
CH
CH+
INPUT
VOL - VOL+
1.CH-/+ Program minus and plus, menu options
2.VOL-/+ Volume increase and decrease, menu reset and entry
3.INPUT: all input resouce display and OK confirm:
4..MENU Menu display
5.POWER:Is used to activate the display or return to standby mode
6
TV LCD-TFT
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection Options
Left side connetions
Antenna Input
Connect cable or antenna
signals to the TV, either
directly or through your
cable box.
HDMI2
connect a signal to
HDMI/DVI.
PC VIDEO Input
Connect the monitor
output connector from
a PC to the jack
DVD/DTV Input
(Component )
Connect a component
video device to these
jacks.
S-Video Input
Connect S-Video outfrom
an S-VIDEO device to the
S-VIDEO input.
VIDEO Input
Connects the
video signal
from a video
device.
HDMI1
connect a signal to
HDMI/DVI.
Earphone jack:
Earphone audio
output terminal.
DVI/PC Audio Input
Connect the audio out from
the external device, used
while using a DVI to HDMI
connector.
Power Cord Socket
This TV operates on AC
power.
The voltage is indicated on
the Specifications page.
Never attempt to operate
the TV on DC power
Power Cord Socket
This TV operates on AC
power.
The voltage is indicated on
the Specifications page.
Never attempt to operate
the TV on DC power
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Remote Controller
- The remote controller cannot be operated unless the batteries are properly loaded.
- When using the remote control, aim it at the remote control sensor on the TV.
TV USB
Function introduction
Press the SELECT button repeatedly to select one of the
system modes in which the remote control can be used.
When the desired device is selected, the corresponding
LED lights on 5seconds.
POWER
Turns your TV or any other programmed
equipment on oroff, depending on mode.
FAVORITE
Open the favorite channel list.
AUDIO.LIST
Open the audio channellist.
CH.LIST
Open the channel list.
T
V
MOD E
M
O
DE
ZOOM( only SUBSystem)
To enlarge or lessen the picture
C H L I S T
FAV.LI ST A U DI O LI S T
USB
Press to enterUSB signal
( only SUBSystem)
HOTKEY
.
Call up the menu
TV
ZOOM
HOTKEY
/
/
Rewind / Fast
backward /Forward
Play
TV
Press to enterTV signal
II
Pause
RETURN
RETURN
S.MODE
Selects the sound appropriate for the program's
character.
P.MODE
Selects the picture appropriate
for the program`s character.
FREEZE
Freezes the currently-viewed picture, but audio continues.
Press FREEZE button again to resume the normal picture.
CC(closed caption)
Select a closedcaption:
CC MUTE, CCON, CC OFF.
INPUT
show the input sourcemode.
TIME
Shows time.
INFO
When you watchthe TV, press thekey, theinformation
displays on bottomof the screen.
MENU
Brings up themain menu tothe screen.
THUMBSTICK
(Up/Down/Left/Right/OK)
Allows you to navigate the on-screen menus and adjust
the system settings to your preference.
EXIT
Clears all on-screendisplays and
returns toTV viewingfrom any menu.
SLEEP button
Displays the SleepTimer option.
MUTE
Switches the soundon or off
LIGHT
Press the light button, white LED will be ON, release
this key,white LED will be OFF.
ARC
(Aspect Ratio Control)
Changes the aspectratio.
SAP
Selects MTS sound:Mono, Stereo, andSAP inAnalog
mode. Change theaudio language in DTV mode.
VOLUME UP/DOWN
Increases/decreases the soundlevel.
CHANNEL UP/DOWN
Selects available channels
Numeric buttons
press to changethe channel.
- button
Press to selectadditional channels
(digital and analog)
Q.VIEW
Switch the currentchannel to thelast channel
you have viewed.
being broadcast bythe same station.
For example, toselect channel
“54-3”, press “54”, then press “-”and “3”.
Note: For DVD function see page 35.
8
TV LCD-TFT
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
External Equipment Connections
Accessories
T
V
M
O
F
D
E
M
O
D
E
C
H
L
I
S
T
AV
.
LI
S
T
A
U
D
I
O
LI
S
T
TV
ZOOM
HOTKEY
RETURN
TFT-LCD TV
OWNER'S MANUAL
Please READ this manual carefully before
operating your TV, and retain it for future
reference.
Power cable
Alkaline battery(AAA) 2
Remote controller
Owner`s manual
Antenna Connection
Generally speaking, to enjoy a clearer picture, we recommend that you use a CATV system or an
outdoor antenna .In different places, the suitable antenna type and position are different.
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
Wall Antenna
Socket
Bronze Wire
RF Coaxial Wire (75 ohm)
VHF Antenna
UHF Antenna
Turn clockwise to tighten.
Bronze Wire
Single-family Dwellings /Houses
(Connect to walljack for outdoorantenna)
Outdoor
Antenna
Be careful notto bend thebronze wire when
connecting the antenna.
To improve thepicture quality ina poor signalarea,
please purchase asignal amplifier andinstall properly.
If the antennaneeds to besplit for twoTV`s, install a 2-
Way Signal Splitter in the connections.
If the antennais not installedproperly, contact your dealer
for assistance.
Owner s Manual 9
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
External Equipment Connections
NOTE: All cables shown are not included with the TV.
Choose Your Connection
There are several ways to connect your television, depending on the components you want to connect
and the quality of the signal you want to achieve. The following are examples of some ways to connect
your TV. Choose the connection which is best for you.
VCR connection
- To avoid picture noise (interference), leave an adequate distance between the VCR and TV
Connection Option 1
Set VCR outputswitch to channel3 or 4and
then tune theTV to the same channelnumber.
Connection Option 2
1. Connect theaudio and videocables from the
VCR's output jacksto the TV input jacks, as
shown in thefigure.
AV OUT
VIDEO
L
L
R
Y2
Y1
Pb2 Pr2
Pb1 Pr1
L
L
R
R
ANT IN
S-VIDEO
R
When connecting theTV to VCR, match the
jack colors (Video = yellow, AudioLeft = white,
and Audio Right = red).
If you connectan S-VIDEO outputfrom VCR to
the S-VIDEO input, the picture qualityis
improved; compared toconnecting a regular
VCR to theVideo input.
2. Insert avideo tape intothe VCR andpress
PLAY on the VCR. (Refer to theVCR owner`s
manual.)
3. Select theinput source withusing the
INPUT button on theremote control, and
then press
press the OK button to confirm.
/
button to selectthe source,
10 TV LCD-TFT
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
External Equipment Connections
External A/V Source Setup
How to connect
Connect the audio and video cables from the external equipment's
output jacks to the TV input jacks, as shown in the figure.
When connecting the TV to external equipment, match the
jack colors (Video = yellow, Audio Left = white, and Audio
Right = red).
AV OUT
VIDEO
L
R
R
Y2
Y1
Pb2 Pr2
Pb1 Pr1
L
L
R
R
How to use
1. Select theinput source withusing the INPUTbutton on
the remote control.
S-VIDEO
L
2. Press the
3. Press theok button toconfirm
/
button to selectthe desired source.
4. Operate thecorresponding external equipment.
Camcorder
Video Game Set
DVD connection
How to connect
1. Connect theDVD video outputs(Y, Pb/Cb, Pr/Cr)to the Y, Pb,
Pr jacks onthe TV and connect theDVD audio outputsto the
YPbPr AudioIN jacks onthe TV, as shownin the figure.
2. If yourDVD only hasan S-VIDEO outputjack, connect this
to the S-VIDEOinput on theTV. as shown inthe figure.
NOTE: If your DVDplayer does nothave component video
output, use S-Video.
AV OUT
VIDEO
L
R
R
Y2
Y1
Pb2 Pr2
Pb1 Pr1
L
L
R
R
How to use
1. Turnon the DVDplayer, inserta DVD.
2. Use theINPUT button on the remotecontrol to selectYPbPr
mode.
S-VIDEO
L
3. Press Playbutton on externalequipment for programplay.
4. Refer tothe DVD player'smanual for operatinginstructions.
Component Input ports
To get better picturequality, connect a DVDplayer to thecomponent
input ports asshown below.
Component ports
on the TV
Y
Pb
Pb
Pr
Pr
Y
Y
Y
Y
Video output ports
on DVD player
B-Y R-Y
Cb
P
Cr
P
B
R
Owner s Manual 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
External Equipment Connections
DTV connection
- This TV can receive Digital Over-the-air/Cablesignals without anexternal digital set-topbox. However, if you doreceive Digital
signals from adigital set-top boxor other digitalexternal device, referto the figureas shown below.
- This TV supports HDCP (High-bandwidth Digital Contents Protection)protocol for DigitalContents (480p,720p,1080i).
How to connect
Use the TV`s (Y, PB, PR) , PCor HDMI
jack for video connections, depending on
your set-top box connector. Then, make
the corresponding audio connections.
AV OUT
VIDEO
L
L
R
R
Y2
Y1
Pb2 Pr2
Pb1 Pr1
L
L
R
R
PC/DVI
AUDIO IN
OPTICAL
P
HDMI1
S-VIDEO
How to use
1. Turnon the digitalset-top box. (Refer
to the owner`smanual for thedigital
set-top box.)
2. Use INPUTon the remotecontrol to select
YPbPr, PC,or HDMI source.
Signal
480i
YPbPr
Yes
HDMI/DVI
Yes
480p
720p
1080i
Yes
Yes
Yes
Yes
Yes
Yes
Digital Set-top Box
Audio Output
Send the TV`s audio to external audio equipment (stereo system) via
the Audio Output (Optical) port.
How to connect
1. Connect oneend of anoptical cable tothe TV Audio (Optical)
Output port.
PC/DVI
AUDIO IN
OPTICAL
AC IN
2. Connect theother end ofthe optical cableto the digitalaudio (optical)
input on theaudio equipment.
See the externalaudio equipment instructionmanual for operation.
Note: When connecting withexternal audio equipments, such as
amplifers or speakers, please turn theTV speakers off.
Caution: Do not look into the optical output port.
Looking at the laser beam may damage
your vision.
12 TV LCD-TFT
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
External Equipment Connections
PC connection
How toconnect
1. To get thebest picture quality, adjust thePC graphics card to 1024x768 .
2. Use theTV`s PCor DVI (DigitalVisual Interface)AudioIN port forvideo connections, dependingon your PCconnector.
If the graphiccard on thePC does notoutput analog anddigital RGB simultaneously, connect onlyone of eitherPCIN or DVI INto
display the PCon theTV.
If the graphic card onthe PC doesoutput analog anddigital RGB simultaneously, set theTV toeither PC or DVI; (the othermode is
set to Plugand Play automaticallyby theTV.)
3. Then,make the correspondingaudio connection. Ifusing a soundcard, adjust thePC sound asrequired.
How touse
1. Turnon the PCand theTV.
2. Turnon the displayby pressing thePOWER button onthe TV'sremote control.
3. Use INPUTon the remotecontrol to selectPC or HDMIsource.
4. Check the image on your TV. There may be noise associated with the resolution, vertical pattern, contrast or brightness in PC
mode. If noiseis present, changethe PC modeto another resolution,change the refreshrate to anotherrate or adjustthe brightness
and contrast onthe menu untilthe picture isclear. Ifthe refresh rateof the PCgraphic card cannot be changed,change the PCgraphic
card or consultthe manufacturer ofthe PC graphiccard.
NOTES:
1 Use a DVIcable.
2 Avoid keeping afixed image onthe TV'sscreen for along period oftime. Thefixed image maybecome permanently imprintedon the
screen.
3 The synchronization inputform for Horizontaland Verticalfrequencies is separate.
Resolution
Frame
frequency
(Hz)
Resolution
Mode
PC/DVI
AUDIO IN
OPTICAL
PC
HDMI1
HDMI2
ANT IN
640*480
800*600
60Hz
60Hz/75Hz
60Hz
PC
SPC
XGA
75Hz
1024*768
Owner s Manual 13
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
External Equipment Connections
Monitor Out Setup
The TV has a special signal output capability which allows you to
hook up a second TV or monitor.
Connect the second TV or monitor to the TV`s AV OUT.
See the Operating Manual of the second TV or monitor for further
details regarding that device`s input settings.
AV OUT
VIDEO
L
L
R
R
Y2
Y1
Pb2 Pr2
Pb1 Pr1
L
L
R
R
S-VIDEO
Notes:
YPbPr, PC, HDMI,DTV input sources
cannot be used for Monitor out.
When connecting with external audio equipments, such as amplifers
or speakers, please turn the TV speakers off.
HDMI
<When the source device(DVD player or Set TopBox) supports HDMI>
How ToConnect
1. Connect the source device to HDMI port of this TV withan HDMI cable(not supplied with this product).
2. No separated audio connection is necessary.
How ToUse
- If the source device supports Auto HDMI function, the output resolution of the source device will be automatically set to 1280x720p.
- If the source device does not support Auto HDMI, you need to set the output resolution appropriately.
To get the best picture quality,adjust the output resolution of the source device to 1280x720p.
- Select HDMI input source in input source option of Select Main source menu.
<When the source device(DVD player or Set TopBox) supports DVI>
How ToConnect
1. Connect the source device to HDMI port of this TV witha HDMI-to-DVI cable(not supplied with this product).
2. Aseparated audio connection is necessary.
3. If the source device has an analog audio output connector, connect the source device audio output to DVI Audio In port located on the
left side of HDMI port.
How ToUse
- If the source device supports Auto DVI function, the output resolution of the source device will be automatically set to 1280x720p.
- If the source device does not support Auto DVI, you need to set the output resolution appropriately.
To get the best picture quality,adjust the output resolution of the source device to 1280x720p.
- Press the INPUT button toselect HDMI input source in input source option of Select Main source menu.
14 TV LCD-TFT
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Cable sample
HDMI Cable
(not supplied with the product)
HDMI to DVI Cable
(not supplied with the product)
Analog Audio Cable
(Stereo to RCA type)
(not supplied with the product)
Owner s Manual 15
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
External Equipment Connections
Connecting Headphones
You can connect a set of headphones to your set if you wish to watch a
TV programme withoutdisturbing the otherpeople in theroom.
Plug a set of headphones into the 3.5mm
mini-jack socket on the rear panel of the set.
PC/DVI
AUDIO IN
OPTICAL
HDMI1
Note
Prolonged use of headphones at a high volume
may damage your hearing.
You will not receive sound from the speakers
when you connect headphones to the system.
Power source
TO USE AC POWER SOURCE
Use the AC polarized line cord provided for
operation onAC. Insert theAC cordplug into
a standard polarizedAC outlet.
AC Outlet
Wider Hole
and Blade
NOTES:
Never connect the AC line cord plug to other
than the specified voltage. Use the
attached power cord only.
If the polarized AC cord does not fit into a non-
polarized AC outlet, do not attempt to file or cut
the blade. Itis the user`sresponsibility to have
an electrician replacethe obsolete outlet.
If you cause a static discharge when touching
the unit and the unit fails to function, simply
unplug the unit from the AC outlet and plug it
back in. The unit should return to normal operation.
Polarized AC Cord Plug
(One blade is wider than the other.)
16 TV LCD-TFT
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Operation
-In the manual, the OSD (on screen display) may be different from your TV`s, because it is just an
example to help you with the TV operation.
-There are several options you might need to set up in order for your TV to work properly. Read the
instructions that follow.
Switching On/Off the TV set
1. First, connect power cord correctly, and then press POWER button on the remote control to turn on the TV.
2. Select the viewing source by using INPUT button on the remote control.
3. When finished using the TV, press the POWER button on the remote control. The TV reverts to standby mode.
4. If you intend tobe away onvacation, disconnect thepower plug fromthe wall poweroutlet.
Note:
If the TV in power on , the screen show information according the type of input signal . the information
will disappear. If there is no signal and blue screen in ON the screen enter in bluescreen and display No signal
on top and center of the screen.
Choose the Menu Language
When you start using your set for the first time, you must select the language which will be used for displaying menus
and indications.
1 Press the MENU button and thenuse
Function menu.
/
button to select the
Menu Language
CC Mode
English
On
English
Spanish
French
Video
2 Press the button and then use
Language.
/
button to select Menu
Basic Caption
CC1
Audio
Advanced Caption Service1
Time
Caption Type
Caption Style
OSD Timeout
Blue Screen
Basic
3 Press the button and then use
/
button to enter the list of
A
B
C
Channel
Function
Lock
Middle
On
available language. English Spanish or French
OSD transparency Middle
4 Select your language with the
/
button and press the OK
button to confirm you selection.
: Move cursor, /OK: Go to submenu, EXIT/ MENU: Exit main menu
5 When you are satisfied with your choice, press the EXIT button
to return to normal viewing or press MENU button to return to the
previous menu.
Choose the Input source
- Change the picture source so you can watch your TV, cable TV, VCR, DVD, or any other devices that are
connected to your TV.
1. Press the INPUT button to enter the Select Main picture Source menu
Select Main Source
and then use
/
button to select the desired items. Cable/Air TV, VIDEO1,
AIR TV
VIDEO1
VIDEO2, SVIDEO, COMPONENT1, COMPONENT2, PC, HDMI1, HDMI2,INNER
VIDEO2
SVIDEO
COMPONENT1
COMPONENT2
PC
DVD.
DVD
STB
2. Press the OK button to confirm.
PVR
HDMI1
3. Press INPUT button to returnto TV viewing or pressEXIT button to return to the
previous menu.
HDMI2
Cable
Game
INNER DVD
Up/Down:Move Cursor
OK: Change MP Source
Right:Activale Source Name Edit Menu
Note:
1. According to your connection device, you can change the name of every source.
2. In channel menu, ifthe Tuneritem is setting asAir or Cable, the source menuwill display Air TV or Cable TV;
Owner s Manual 17
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Channel menu
This TV set has three methods to set channels, which are respectively Auto Scan, manual Scan fine tune.
In this section, how to use the remote control to set channel is explained. You can also use buttons on the TV
set to set channel.
A password is required to gain access to Channel menu if the Lock of Edit program menu is turned on.
Automatic Scan
- Automatically finds all channels available through antenna or cable inputs, and
stores them inmemory on theAll Channel List.
Note : Channel menu only available after selecting Air TV or Cable
TV in the input menu.
Video
Air
Cable
Tuner
Air
Auto Scan
Manual Scan
Fine Tune
Edit Program
Rename
Audio
1 Press the MENU button and thenuse
Channel menu.
/
button to select the
Time
A
B
C
Channel
Function
Lock
2 Press the button and then use
/
/
button to select Tuner.
button to Select Cable or
3 Press the button and then use
Air mode.
: Move cursor, /OK: Go to submenu, EXIT/ MENU: Exit main menu
4 Press the OK button
5 When you are satisfied with your choice, press MENU button to
return to the previous menu.
Tuner
Air
OK
Cancel
6 Press the
/
button to select Auto Scan.
Video
Auto Scan
Manual Scan
Fine Tune
Edit Program
Rename
Audio
7 Press the button and press the OK button to start searching.
8 To cancel searching, press the OK button.
Air Tuner Number: 47
Found:
1
Time
A
B
C
Channel
Function
Lock
: Move cursor, OK: Enter, MENU: Return to upper menu,
EXIT:Exit main menu
When Air is selected, the TV will detect antenna signals and will
search for antenna TV (NTSC and ATSC) channels available in
your local area.
When Cable is selected, the TV will detect cable company supplied
signals and willsearch for cableTV (NTSC,ATSC, QAM modulated)
channels available in your area.
18 TV LCD-TFT
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Channel menu
Manual Scan
If excessive channel signals of unwanted programs are received in local area,
manual search function is recommended.
Tuner
Video
Air
Type
Air
4
Auto Scan
Audio
1 Press the MENU button and thenuse
Channel menu.
/
button to select the
Channel NO
Frequency
Manual Scan
Fine Tune
Time
67.250MHz
0k
A
B
C
Channel
Function
Lock
Edit Program
Rename
2 Press the button and then use
/
/
button to select Tuner.
3 Press the button and then use
mode.
button to Select Cable or Air
: Move cursor, /OK: Go to submenu, / ME NU: Return to upper menu,
EXIT: Exit main menu
4 Press the OK button.
5 When you are satisfied with your choice, press MENU button to return
to the previous menu.
6 Press the
/
button to select Manual Scan.
7 Press the button and then use digital buttons to select channel number you want to add or delete.
8 Press the button to select OK item and press OK button to add for the channel number.
9 Press EXIT button to return to TV viewing or press MENU button to return to the previous menu.
Fine Tune (only in anolog signal )
1 Press the MENU button and thenuse
Channel menu.
/
button to select the
Tuner
Air
Video
2 Press the
3 Press the or OK button
4 Press the button to tune.
/
button to select Fine Tune.
Auto Scan
Manual Scan
Fine Tune
Edit Program
Rename
Audio
For the tune of the analog channels
Time
/
A
B
C
Channel
Function
Lock
5 Press EXIT button to return to TV viewing or press MENU button
to return to the previous menu.
: Move cursor, /OK: Go to submenu, / ME NU: Return to upper menu,
EXIT: Exit main menu
Owner s Manual 19
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Channel menu
Edit Program
You can create your own Favorite List. Use the
FAV.LiST button on the remote control when a channel is highlighted and
then you canadd or deletethe channel to/fromthe Favorite List.
You can skip some channel;
You can lock some channel;
Tuner
Air
Music Ch No Name Fav Lock Skip
Video
Auto Scan
Manual Scan
Fine Tune
Edit Program
Rename
Audio
Time
A
B
C
Channel
Function
Lock
Page 1/1
1 Press the MENU button and thenuse
Channel menu.
/
button to select the
: Move cursor, /OK: Go to submenu, / ME NU: Return to upper menu,
EXIT: Exit main menu
2 Press the button and then use
3 Press the button. You will now see a screen filled with channel numbers.
4 Use button to select FAV., Lock or Skip item, and then use the OK button to confirm.
/
button to select Edit Program.
/
/
/
5 When you are satisfied with your choice, press MENU button to returnto the previousmenu or PressEXIT button
to return to TV viewing.
Skip
After the programs are presetting, you can skip some programs so that to select your favorite channels only.
Lock
After the programs are presetting, you can lock some programs so that to select your favorite channels only.
Fav (Favorite)
Press the FAV.LiST button open the favorite channel list, press
channel and press OK button to confirm.
/
button to select the
Tuner
Air
Video
Auto Scan
Manual Scan
Fine Tune
Edit Program
Rename
Rename (only in anolog signal )
Audio
Time
1 Press the MENU button and thenuse
Channel menu.
/
button to select the
A
B
C
Channel
Function
Lock
Program No
Program Name
2 Press the button and then use
/
button to select Rename.
3 Press the or OK button to enter the Submenu.
: Move cursor, /OK: Go to submenu, / ME NU: Return to upper menu,
EXIT: Exit main menu
4 The cursor flashs, Use the digital button to select the letter, and
press
/
button to move the cursor and MENU button to confirm.
(Press the Q.VEIW button to delete the letter. )
5 When you are satisfied with your choice, press MENU button to
return to theprevious menu orPress EXIT button to returnto TV
viewing.
20 TV LCD-TFT
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Select the desired program
1 Using the CH+/- buttons.
Press the CH+button to selecta channel numberin number increasingdirection.
Press the CH-button to selecta channel numberin number decreasingdirection.
(Note: If Skip is ON on one channel, press CH+/- button, the channel will not appear.)
Select the desired sound
Press the VOL-/+ or
/
buttons on the remote or the front of the TV set to adjust the volume level. The range is 0~100.
When the volume buttons are pressed the volume level is displayed automatically on the TV screen.
Volume
-
+ 21
Mute
When you need to pay attention to surrounded sounds, or there is a telephone calling you or there are some
guests visiting you, the sound elimination (mute) function is very convenient.
1
Press the MUTEbutton on theremote control and"
"
type face willdisplay on thescreen. Atthis time, thesound
of the TV set isturned off.
2 If you wantto recover thesound, press theMUTE
button again ordirectly press VOL+button.
Owner s Manual 21
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Video menu
The TV menu gives you an overview of the menus you can select.
Note: Depending on the input signal, one or more menu items may not be selectable.
How to select picture modes
The picture mode provides thepre-defined images settings. There are four settings: standard/vivid /mild/custom.
Press P.MODE button repeatedlyon the remotecontrol to selectthe desired option(Standard/Vivid/Mild/Custom).
Standard: normal mode.
Vivid: mode of watchingthe movement ofpicture.
Mild: the effect of the pictureis soft.
Custom: picture effect which you favorite.
How to customize your own picture status
1 Press the MENU button and thenuse
/
button to selectthe Video menu.
Standard
Mode
Custom
50
2 Press the button and then use
3 Press the button and thenuse
/
/
button to select the desired items.
button to adjustthe setting.
Video
Contrast
Brightness
Tint
Vivid
Audio
50
Mild
0
4 When you aresatisfied with yourchoice, press MENU button to returnto
the previous menuor press theEXIT button to returnto TV viewing.
Time
Custom
Color
50
A
B
C
Sharpness
DNR
50
Channel
Function
Lock
Off
Color Temperature Standard
Black Stretch Off
Contrast
This will adjustthe intensity ofbright parts inthe picture butkeep
the dark partsunchanged.
: Move cursor, /OK: Go to submenu, EXIT/ MENU: Exit main menu
Brightness
This will adjustthe light outputof the completepicture, which will
mainly affect the darker areasof the picture.
Tint
Allows you toselect the colormix (Tint) of the picture.
Note:
Color
This will adjustthe saturation levelof the colorsto suit yourpersonal
preference.
Only when theitem of modeis custom ,
the Contrast Brightness Tint color
Sharpness can beset by user. In other
mode the valueof them arepreset
by program .
Sharpness
This will adjustthe sharpness offine details inthe picture.
DNR (Digital Noise Reduction )
Automatically filters out and reduces the image noise and improves picture
quality when receiving weak video signals.
Select Off/Weak/Medium /Strong according to the image noise.
Color temperature
This will increase or decrease Warm (red) and Cold (blue) colors to suit
personal preferences.
Select Cold to give the white colors a blue tint, Standard to give the white
colors a neutral tint, Warm to give the white colors a red tint.
Black Stretch
This will increaseautomatically the contrastrage.
22 TV LCD-TFT
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Aspect Ratio Control
- Lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV with a 16:9 ratio picture format.
- Note: If afixed image is displayed on the screen for a long time, it image may become imprinted on the screen and remain visible.
1 Press the ARC button the Aspect Ratio menu appearance on the screen.
2 Press the
/
button to select the desired picture format.
3 Press the OK button to confirm.
4:3 mode
Choose 4:3 when you want to view a picture with an original 4:3 aspect ratio, with gray bars appearing at both
the left and right sides.
16:9 mode
Choose 16:9 when you wantto adjust thepicture horizontally, in alinear proportion tofill the entirescreen.
Zoom 1
Choose Zoom 1 when you wantto view thepicture without anyalteration. However, the top andbottom portions
of the picturewill be cropped.
Zoom 2
Choose Zoom 2 when you wantthe picture tobe altered, bothvertically extended andcropped. The picture taking
a halfway tradeoff between alteration and screencoverage.
Subtitle
Choose Subtitle when you wantto adjust thepicture in anon-linear proportion, thatis, more enlargedat top sidesand no alteration,
at bottom side.
PANORAMA
Choose PANORAMA when you wantto enlarge thepicture in correctproportion.
Note: When enlargingor reducing thepicture size, theimage may becomedistorted.
Notes
In TV, VIDEO1, VIDEO2,SVIDEO modes, all screen modes can be selected.
(16:9 Mode . Panorama . Zoom1. Zoom2 . 4:3 Mode. Subtitle).
In YPbPr, HDMI modes, only 16:9 Mode, 4:3 modes, Zoom1 or Zoom2 can be selected.
In PC mode, only 16:9 Mode, 4:3 mode, dot by dot can be selected.
In DTV mode, only 16:9 Mode, 4:3 mode can be selected.
Owner s Manual 23
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Audio menu
How to Select Audio modes
Press S.MODE buttonrepeatedly on the remote control to select the desired option (Live/POP/Rock/Custom).
Custom A spare setting that can be adjusted to personal tastes.
Live
POP
Rock
Normal sound withmoderate bass andtreble setting.
Designed to reducethe bass andtreble which enhancesthe voice fornews programs.
Enables extra bassand treble toenhance the movieexperience.
How to Customize your own audio status
1 Press the MENU button and thenuse
/
button to selectthe Audio menu.
2 Press the button and then use
3 Press the button and then use
/
/
button to select the desired items.
button to adjustthe setting.
HeadPhone Volume 10
Video
Volume
20
0
Audio
Balance
Equalizer Mode
Digital Audio
AVL
Custom
4 When you aresatisfied with yourchoice, press MENU button to returnto
the previous menuor press theEXIT button to returnto TV viewing.
Time
A
B
C
off
Channel
Function
Lock
Headphone volume
This controls the level of sound through the headphones.
: Move cursor, /OK: Go to submenu, / ME NU: Return to upper menu,
EXIT: Exit main menu
Volume
This will adjustthe sound outputlevel.
Balance
This will adjust the output of the right and left speakers to obtain the best
stereo reproduction for your listening position.
HeadPhone Volume
Volume
10
20
Video
Live
POP Rock
Custom
120Hz
500Hz
1.5KHz
5KHz
Audio
Balance
0
Equalizer Mode
Digital Audio
AVL
Custom
Time
Equalizer Mode
This sound settingcan be adjustedto suit yourpersonal preference.
10KHz
A
off
B
C
Channel
Function
Lock
Digital Audio (only selectable with digital broadcast signals)
Make your selectionof the sourceto which thedevice with digitalaudio
input has beenconnected.
In addition toaccepting audio inputvia DigitalAudio In, theTV can output
Digital audio viathe Optical connector to anexternal amplifier orreceiver.
If your amplifieror receiver hasa matching connectorfor DigitalAudio In,
you can connectit with asingle cable tothe TV`s Optical.
: Move cursor, /OK: Go to submenu, / ME NU: Return to upper menu,
EXIT: Exit main menu
HeadPhone Volume
Volume
10
20
Video
AVL(Automatic volume control)
This will reduces the differences in volume level among broadcasters.
Audio
Balance
0
Equalizer Mode
Digital Audio
AVL
Custom
Digital Audio Output Mode
Time
Dolby Digital
PCM
A
B
C
off
Channel
Function
Lock
: Move cursor, /OK: Go to submenu, / ME NU: Return to upper menu,
EXIT: Exit main menu
24 TV LCD-TFT
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Audio menu
SAP Broadcasts Setup
- This TV can receive MTS stereo programs and SAP
(Secondary Audio Program) that accompanies the stereo program;
if the station transmits an additional sound signal as well as the original one.
- When having selected SAP button on the remote control, this TV can only
receive the signal when the TV station transmits the proper signals.
- Mono sound is automatically received if the broadcast is only in Mono; even
though Stereo or SAP has been selected.
- Select Mono if you want to listen to mono sound during stereo/SAP
broadcasting.
- Stereo or SAP can be received in a Analog channel.
1. Use the SAP button to select your desired MTS mode in a analog signal.
Each time you press the SAP button, Mono,Stereo, or SAP appear.
If other languagesare available onthe digital signal, select them withthe
SAP button.
2. Press EXIT button to saveand return toTV viewing.
Owner s Manual 25
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Time menu
Date /Time setting
Setting the clock is necessary in order to use the various timer features of
the TV. Also, you can check the time while watching the TV.
Video
Date/Time
Timer on
Mode
Manual Auto
Date 2004.12.31
Time 08 38 PM
Audio
Timer Off
Sleep Timer
Time Zone
0 min
1 Press the MENU button and thenuse
/
button to selectthe Time menu.
Time
Newfoundland
A
B
C
Daylight Saving On
2 Press the button and then use
/
button to selectthe Date/Time.
Channel
Function
Lock
3 Press the button and thenuse
Manual or Auto.
/
button to selectthe Mode:
4 When you are satisfied with your choice, press MENU button to return to
the previous menu or press the EXIT button to return to TV viewing.
: Move cursor, /OK: Go to submenu, / ME NU: Return to upper menu,
EXIT: Exit main menu
Timer on setting
Video
Date/Time
Timer on
Mode
Off
Once
Daily
Switch on automatically at the time you presetting.
Audio
On time 08 38 PM
Timer Off
Sleep Timer
Time Zone
0 min
Time
1 Press the MENU button and thenuse
/
button to selectthe Time menu.
Newfoundland
A
B
C
Daylight Saving On
Channel
Function
Lock
2 Press the button and then use
/
button to selectthe Timer On.
3 Press the button and thenuse
Off, Once or Daily.
/
button to selectthe Mode:
4 Press the OK button to confirm.
: Move cursor, /OK: Go to submenu, / ME NU: Return to upper menu,
EXIT: Exit main menu
When selecting Onceor Daily item, On time itemwill be active, press
button to set the desired level, press button to buttonmove cursor.
/
/
5 When you are satisfied with your choice, press MENU button to return to
the previous menu or press the EXIT button to return to TV viewing.
Video
Date/Time
Timer on
Mode
Off
Once
Daily
Audio
Timer Off
Timer off setting
Off time 08 38 PM
Sleep Timer
Time Zone
0 min
Time
Newfoundland
A
B
C
Daylight Saving On
Switch off automatically at the time you presetting.
Channel
Function
Lock
1 Press the MENU button and thenuse
/
button to selectthe Time menu.
2 Press the button and then use
/
button to selectthe Timer Off.
: Move cursor, /OK: Go to submenu, / ME NU: Return to upper menu,
EXIT: Exit main menu
3 Press the button and thenuse
Off, Once or Daily.
/
button to selectthe Mode:
4 Press the OK button to confirm.
When selecting Onceor Daily item, On time itemwill be active, press
button to set the desired level, press button to buttonmove cursor.
/
/
5 When you are satisfied with your choice, press MENU button to return to
the previous menu or press the EXIT button to return to TV viewing.
26 TV LCD-TFT
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Time menu
Sleep Timer setting
The sleep timer automatically shuts off the TV after a preset time
(from 15 to 120 minutes).
Video
Date/Time
Timer On
0 min
Audio
Timer Off
15min
30min
60min
90min
120min
1 Press the MENU button and thenuse
/
button to selectthe Time menu.
Sleep Timer
Time Zone
0 min
Time
Newfoundland
2 Press the button and then use
3 Press the button and then use
/
/
button to selectthe SleepTimer.
A
B
C
Daylight Saving On
Channel
Function
Lock
button to selectthe number ofminutes.
Select 0Min, 15Min, 30Min, 60Min, 90Min, 120Min.
When the numberof minutes youwant is displayedon the screen, press
the OK button. The time begins tocount down fromthe number ofminutes
selected.
: Move cursor, /OK: Go to submenu, / ME NU: Return to upper menu,
EXIT: Exit main menu
4 When you aresatisfied with yourchoice, press MENU button to returnto
the previous menuor press theEXIT button to returnto TV viewing.
5 To cancel the set sleep timer:
Press the
/
button to select 0min.
You can use theSLEEP button also to selectquickly the sleeptimer.
Time zone setting
Newfoundland
Video
Date/Time
Timer on
Atlantic
Eastern
Central
Mountain
Pacific
(only available when date/time mode is set to Automatic)
This function allows you to select your local time zone.
Broadcasted time information will correct the clock display
for your local time.
Audio
Timer Off
Sleep Timer
Time Zone
0 min
Time
Newfoundland
A
B
C
Daylight Saving On
Channel
Function
Lock
Alaska
Hawaii
Samoa
1 Press the MENU button and thenuse
/
button to selectthe Time menu.
2 Press the button and then use
3 Press the button and then use
/
/
button to selectthe Time Zone items.
button to adjustthe setting.
: Move cursor, /OK: Go to submenu, / ME NU: Return to upper menu,
EXIT: Exit main menu
4 When you aresatisfied with yourchoice, press MENU button to returnto
the previous menuor press theEXIT button to returnto TV viewing.
Press the button and thenuse
/
button to select your viewing area time
zone: Newfoundland, Atlantic, Eastern, Central, Mountain, Pacific, Alaska, Hawaii
or Samoa.
Daylight Saving setting
Video
Date/Time
Timer on
Audio
Timer Off
(only available when date/time mode is set to Automatic)
Daylight saving timeis automatically setby specially
broadcasted signals.
This menu itemallows you todisable the automaticsetting of
daylight saving time. This is useful if you live in an area orstate
where daylight savingis not applied, but you receivechannels
from other areaswhere daylight savingsignals are broadcasted.
Sleep Timer
Time Zone
0 min
Time
Newfoundland
A
B
C
Daylight Saving On
On
Off
Channel
Function
Lock
: Move cursor, /OK: Go to submenu, / ME NU: Return to upper menu,
EXIT: Exit main menu
1
2
Press
/
button to select Daylight Saving item.
Press the buttont to selectOn for automatic clockcorrection
for daylight savingtime, based onspecially broadcasted signals.
Select Off to disable automaticclock correction basedon the specially
broadcasted signals.
Owner s Manual 27
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Function menu
Closed Captions
Closed captioning is a process which converts the audio portion
of a television program into written words which then appear as
subtitles on the television screen. Closed captions allow viewers
to read the dialogue and narration of television programs.
Menu Language
CC Mode
English
On
Video
On
off
Basic Caption
CC1
Audio
Advanced Caption Service1
Time
Caption Type
Caption Style
OSD Timeout
Blue Screen
Basic
Using Closed Captions
On when mute
A
B
C
Captions are thesubtitles of thedialogue and narrationof television
programs. For prerecordedprograms, program dialogue
can be arrangedinto captions inadvance. Its possibleto caption
a live programby using aprocess called real-timecaptioning,
which creates captionsinstantly. Real-time captioning isnormally
done by professionalreporters using amachine shorthand
system and computerfor translation intoEnglish.
Channel
Function
Lock
Middle
On
OSD transparency Middle
: Move cursor, /OK: Go to submenu, / ME NU: Return to upper menu,
EXIT: Exit main menu
Captioning is aneffective system for the hearing-impaired,
and it canalso aid inteaching language skills.
Note: The captions do not always use
correct spelling and grammar. Not all
TV programs and product commercials
are made for broadcast with Closed
Caption information included. Refer to
your area`s TV program listings for the TV
channels and times of Closed Caption
shows. The captioned programs are
usually noted in the TV listings with service
CC mode
1. Press the MENU button and thenuse
Function menu.
/
button to selectthe
2. Press the
/
button to select the CC mode.
3. Press the button and thenuse
/
button to select the items:
(On, Off or On When mute.)
4. When you are satisfied with your choice, press MENU button to return to
the previous menu or press the EXIT button to return to TV viewing.
marks such as CC
.
Basic Caption
This allows you to configure the way you choose to view the digital
captioning.
Menu Language
English
On
Video
1. Press the MENU button and thenuse
Function menu.
/
button to selectthe
CC1
CC Mode
CC2
Audio
Basic Caption
CC1
CC3
Advanced Caption Service1
2. Press the button and thenuse
/
button to selectBasic Caption.
Time
CC4
Caption Type
Caption Style
OSD Timeout
Blue Screen
Basic
A
B
C
3. Press the button and thenuse
CC3, CC4, Text1, Text2, Text3, or Text4.
/
button to selectcaption: CC1, CC2,
Text1
Text2
Text3
Text4
Channel
Function
Lock
Middle
On
4. When you are satisfied with your choice, press MENU button to return to
the previous menu or press the EXIT button to return to TV viewing.
OSD transparency Middle
CAPTION
: Move cursor, /OK: Go to submenu, / ME NU: Return to upper menu,
EXIT: Exit main menu
The term forthe words thatscroll across thebottom of theTV screen; usually
the audio portionof the programprovided for thehearing impaired.
TEXT
The term forthe words thatappear in alarge black frameand almost cover
the entire screen;usually messages providedby the broadcaster.
Menu Language
CC Mode
English
On
Video
Service1
Service2
Service3
Service4
Service5
Service6
Advanced Caption(In DTV mode)
Basic Caption
CC1
Audio
This allows youto configure theway you chooseto view thedigital
captioning.
Select one ofthe digital servicechannels made availableby the caption
provider.
Advanced Caption Service1
Time
Caption Type
Caption Style
OSD Timeout
Blue Screen
Basic
A
B
C
Channel
Function
Lock
Middle
On
There are 6standard services. Service1 is designatedas the Primary
Caption Service. This service containsthe verbatim, ornear-verbatim
captions for theprimary language beingspoken in theaccompanying
program audio.
OSD transparency Middle
: Move cursor, /OK: Go to submenu, / ME NU: Return to upper menu,
EXIT: Exit main menu
Service 2 isdesignated as theSecondary Language Service. This service
contains captions ina secondary languagewhich are translationsof the
captions in theprimary Caption Service. The other service subchannels are
not pre-assigned. Itis up tothe discretion ofthe individual captionprovider
to utilize theremaining service channels.
28 TV LCD-TFT
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Caption Style (In DTV mode)
This allows you to modify how digital captions are displayed on your TV.
Select from the following options to change the visual characteristics of
your TV`s digital captioning.
Menu Language
CC Mode
English
On
Style
Size
Font
Default
Default
Default
1. Press the MENU button and then use
menu.
/
button to selectthe Function
Video
Basic Caption
CC1
Audio
Advanced Caption Service1
2. Press the button and thenuse
3. Press the button and then use
/
/
button to select Caption Style.
button to setstyle as Custom.
button to customizethe Style, Font, etc., to yourpreference.
Text Color
Text Opacity Default
BG Color Default
Default
Caption Type
Caption Style
OSD Timeout
Blue Screen
Basic
Time
A
B
C
4. Use
/
Channel
Function
Lock
Middle
On
BG Opacity Default
Preview
5. When youare satisfied withyour choice, pressMENU button to returnto
the previous menuor press theEXIT button to returnto TV viewing.
OSD transparency Middle
Closed Caption
: Move cursor, /OK: Go to submenu, / ME NU: Return to upper menu,
EXIT: Exit main menu
Style
Select this option to select the font style of caption display according to
your own preference.
Press the
Style4,Style5, Style6, Style7, Style8.
/
button to select Default, Custom, Style1, Style2, Style3,
Press the OK button to confirm.
Size
Select this optionto select thesize of captiondisplay according toyour own preference.
Press the / button to select Default, Small, Normal or Large ,
Press the OK button to confirm.
Font
Select this optionto select thefont of captiondisplay according toyour own preference.
Press the
Press the OK button to confirm.
/
button to select Default, Font1 Font2, Font3, Font4, Font5, Font6, Font7.
Text color
Select this optionto select thetext color orthe opacity ofthe text boxof caption displayaccording to yourown preference.
Select a colorand one ofthe opacity options.
Text Opacity: Specify theopacity for thetext color.
BG (Background) Color: Select abackground color.
BG (Background) Opacity: Select theopacity for thebackground color.
Menu Language
CC Mode
English
On
Video
OSD Timeout
Basic Caption
CC1
Audio
Advanced Caption Service1
1. Press theMENU button and thenuse
/ button to selectthe Function menu.
button to select OSD Timeout.
button to select short, middle orLong.
Time
Caption Type
Caption Style
OSD Timeout
Blue Screen
Basic
2. Press the button and thenuse
3. Press the button and then use
4. Press the OK button toconfirm.
/
/
Short
Middle
Long
A
B
C
Channel
Function
Lock
Middle
On
OSD transparency Middle
: Move cursor, /OK: Go to submenu, / ME NU: Return to upper menu,
EXIT: Exit main menu
Blue screen
Select this option to select the character background color.
1. Press theMENU button and thenuse
/
button to selectthe Function menu.
2. Press the button and thenuse
3. Press the button and thenuse
4. Press the OK button toconfirm.
/
/
button to select Blue screen.
button to select on or off.
Menu Language
CC Mode
English
On
Video
Basic Caption
CC1
Audio
Advanced Caption Service1
OSD transparency
Time
Caption Type
Caption Style
OSD Timeout
Blue Screen
Basic
1. Press theMENU button and thenuse
/
button to selectthe Function menu.
A
B
C
Low
Channel
Function
Lock
2. Press the button and thenuse
3. Press the button and thenuse
4. Press the OK button toconfirm.
/
/
button to select OSD transparency.
button to select Low ,middle or High.
Middle
On
Middle
High
OSD transparency Middle
: Move cursor, /OK: Go to submenu, / ME NU: Return to upper menu,
EXIT: Exit main menu
Owner s Manual 29
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Adjust menu
Screen Setup for PC mode
- When RGBconnect to PCinput and selectthe PC, thisfunction is used.
Adjustment for screen Position, Size, Phase, Reset
- Display PCAdjust Menuby pressing INPUT button then use
Position : Adjust the screen position.
/
button to select the PC item.
Size : Adjust the screen size.
Phase : Adjust the phase of Pixel clock.
Mode : there are two modes:Auto Sync and default
1 Press the MENU button and thenuse
Adjust menu.
/
button to selectthe
H Size
20
20
20
20
Video
Audio
Time
H Position
V Size
2 Press the button and then use
3 Press the button and then use
/
button to select the desired items.
button to adjustthe setting.
/
V Position
4 When you aresatisfied with yourchoice, press MENU button to returnto
the previous menuor press theEXIT button to returnto TV viewing.
Adjust
Function
Lock
Phase Adjust 18
Mode
: Move cursor, /OK: Go to submenu, EXIT/ MENU: Exit main menu
30 TV LCD-TFT
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Lock Menu
Parental Control can be used to block specific channels, ratings and other viewing sources.
The Parental Control Function is used to block program viewing based on the ratings sent by the broadcasting
station.
The default setting is to allow all programs to be viewed. Viewing can be blocked by choosing the type of the program
and the categories.
It is also possible to block all program viewing for a time period. To use this function, the following must be done :
1. Set ratings and categories to be blocked.
2. Specify a password
3. Enable the lock
Parental Control rating and categories
Rating guidelines are provided by broadcasting stations. Most television programs and television movies can be
blocked by TV Rating and/or Individual Categories. Movies that have been shown at the theaters or direct-to-video
movies use the Movie Rating System (MPAA) only.
Ratings for Movies previously shown in theaters:
Movie Ratings :
NR
G
(Permits all programs)
(General audience)
PG
PG-13
R
(Parental guidance suggested)
(Parents strongly cautioned)
(Restricted)
NC-17
X
(No one 17 and under admitted)
(Adult only)
If you set PG-13 : G and PG movies will be available , PG-13, R, NC-17 and X will be blocked.
Ratings for Television programs including made-for-TV movies :
TV-Y
(All children)
TV-Y7
TV-G
(Children 7 years older)
(General audience)
TV-PG
TV-14
TV-MA
(Parental guidance suggested)
(Parents strongly cautioned)
(Mature audience only)
TV Rating Children:
ALL (Age)
(applies to TV-Y, TV-Y7)
(applies to TV-Y7)
FV (Fantasy Violence)
TV Rating General:
ALL (Age)
(applies to TV-G, TV-PG, TV-14, TV-MA)
(applies to TV-PG, TV-14)
D (Dialogue - sexual dialogue)
L (Language - adult language)
S (Sex -sexual situations)
V (Violence)
(applies to TV-PG, TV-14, TV-MA)
(appliesto TV-PG, TV-14, TV-MA)
(applies to TV-PG, TV-14, TV-MA)
Owner s Manual 31
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Lock setup
- Set up blocking schemes to block specific channels, ratings, and external viewing sources.
- Apassword is required to gain access to this menu.
1. Press the MENU button and thenuse
Then, press the button.
/
button to selectthe LOCK menu.
Video
Password
Input Password:
The TV is set upwith the initialpassword 0-0-0-0 and
security default passwordis 9-4-4-3.
Parental Lock On
MPAA Rating
Parental Guide
CA Eng Rating
CA Fren Rating
Audio
Confirm Password:
Time
A
B
C
2. Use the
Once the option is selected, change the settings to your preference.
/
button to choose from the right Lock Menu options.
Channel
Function
Lock
Password: Change the password by inputting a new password twice.
: Move cursor, /OK: Go to submenu, / ME NU: Return to upper menu,
EXIT: Exit main menu
Parental Lock:
1. P ress
/
button to select Parental Lock item.
2. Press the button to select On or Off.
3. Press the OKbutton to confirm.
Note:
if the ParentalLock is settingas Off, thechange of theMPAARating, Parental Guide,CA EngRating and CAFren Rating willbe no useful.
Movie Rating (MPAA): Blocks movies according to the movie ratings
Video
Password
NR
G
limits specified, so children cannot view certain movies. You can set the
ratings limit by blocking out all the movies with the ratings above a specified
level. Keep in mind that themovie ratings limit only applies to movies
shown on TV, not TV programs, such as soap operas.
Parental Lock On
MPAA Rating
Parental Guide
CA Eng Rating
CA Fren Rating
Audio
PG
PG-13
R
Time
A
B
C
Channel
Function
Lock
NC17
X
1 Press
/
button to select MPAA Rating item.
button to selectthe rating.
2 Press the button and then use
/
3 Press the ok button to set blockor unblock.
: Move cursor, /OK: Go to submenu, / ME NU: Return to upper menu,
EXIT: Exit main menu
4 When you aresatisfied with yourchoice, press MENU button to returnto
the previous menuor press theEXIT button to returnto TV viewing.
32 TV LCD-TFT
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Lock setup
Parental Guide
Parental Guide: Blocks any channelsthat you donot want towatch or
that you donot want yourchildren to watch.
Video
Password
ALL FV
D
S
L
V
Parental Lock On
MPAA Rating
Parental Guide
CA Eng Rating
CA Fren Rating
TV-Y
Audio
TV-Y7
TV-G
Note : The Parental control will automatically block certain categories that are
more restrictive . For example, if you block TV-Y category, then
TV-Y7 will automatically be blocked. Similarly, if you block the TV-G
category, then all the categories in the young adult group will be
blocked (TV-Y, TV-Y7,TV-G, TV-PG, TV-14,and TV-MA). The sub-ratings
(D, L, S, V) work together similarly.
Time
TV-PG
TV-14
TV-MA
A
B
C
Channel
Function
Lock
How to set the FV, D, L, S and V sub-ratings.
: Move cursor, /OK: Go to submenu, / ME NU: Return to upper menu,
EXIT: Exit main menu
First, the
TV-Y, TV-Y7, TV-G, TV-PG,TV-14, orTV-MA, and press the
/
button select one of these Ratings:
/
button.
A symbol
While
will be displayedfor each sub-rating.
is selected, pressthe OK button to goto a subrating.
To select adifferent Rating, press the
the process.
/
buttons and thenrepeat
Note: The V-chip willautomatically block certaincategories
that are More restrictive .For example, ifyou block
sub-rating in
sub-ratings in TV-14 andTV-MAwill automatically
TV-PG, thenthe
be blocked.
CA Eng Rating
Canadian English LanguageRating
Video
Password
C
1 Press
/
button to select CA Eng Rating item.
Parental Lock On
MPAA Rating
Parental Guide
CA Eng Rating
CA Fren Rating
Audio
C8+
G
2 Press the button and then use
3 Press the ok button to confirm.
/
button to selectthe rating.
Time
PG
A
B
C
14+
18+
Block All
Channel
Function
Lock
4 When you aresatisfied with yourchoice, press MENU button to returnto
the previous menuor press theEXIT button to returnto TV viewing.
C
C8+
G
PG
14+
18+
Children
: Move cursor, /OK: Go to submenu, / ME NU: Return to upper menu,
EXIT: Exit main menu
Children eightyears and older
General Programming, suitable for allaudiences
Parental Guidance
Viewers 14 years andolder
AdultProgramming
CA Fren Rating
Canadian French LanguageRating
Video
Password
G
1 Press button to select CA Fren Rating item.
/
Parental Lock On
MPAA Rating
Parental Guide
CA Eng Rating
CA Fren Rating
Audio
8 ans+
13 ans+
16 ans+
18 ans+
Block All
2 Press the button and then use
3 Press the ok button to confirm.
/
button to selectthe rating.
Time
A
B
C
Channel
Function
Lock
4 When you are satisfied with yourchoice, press MENU button to returnto
the previous menuor press theEXIT button to return to TV viewing.
G
General
8 ans+
13 ans+
8+General - Notrecommended for youngchildren
Programmingmay not besuitable for childrenunder the
age of 13
: Move cursor, /OK: Go to submenu, / ME NU: Return to upper menu,
EXIT: Exit main menu
16 ans+
18 ans+
Programmingis not suitablefor children underthe age of16
Programmingrestricted to adults
Owner s Manual 33
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Brief Info.
- Brief Infoshows the presentscreen information.
- Press theINFO button to showthe Brief Infoon the screen.
- Press theINFO button or EXIT button to exit.
Function:
Show the presentscreen information.
Press the INFObutton or EXITbutton to exit.
A: Program title
B: Program rating categories
C: Video resolution
D: Program name
E: Additional information.
F: Program signalintensity
G: Present time, Day of week, Month
Quick program view
This function enables quick swap to the last watched program.
1Suppose the channelnumber you usedjust now is8 and thechannel number youare
using is 18(as shown inthe figure).
2If you wantto return tothe last watchedprogram channel 8,you can simplypress the
Q.View button.
3If you wantto return tochannel 18, pressthe button again.Use this function,you can
easily change betweenthe channel youare using andthe channel youused last time.
34 TV LCD-TFT
Download from Www.Somanuals.com. All Manuals Search And Download.
USB System
USB and Card Reader play prepare
1. Supporting equipment
are usedfor internalfiles. Thistelevision canonly
play someAVIand MPG filesof this format. Those
files with suffix of datare not moviefiles, but data
files usedby computers,and cannotbe playedfor
movies.
5.External card reader supports most digital
cards available in the market. Readable digital
cards are classified according to the property of
card readers and can be connected to mobile
hard disks(working voltage5.0V,working current
not over 500mA).
6. Some Time the television operation may be
halted due to excessive rate of information code
errors. In such case, restart the system. As there
are manynonstandard USBmobile devicesin the
market. If this kind of USB mobile devices are
used in the stream media play system, the
problem of identification failure might occur. The
same problem mayalso happen withcomputers,
not televisions.
1.Equipment supporting Mass and Storage
agreements include USB, mobile hard disk, card
reader,some MP3and digitalcamera.
2.Equipment supporting PTP agreement includes
some digitalcamera.
2. 1 Supporting media:
picture, music, MPEG4, MPEG2and MPEG1;
Supporting fileformat
*.Avi, *.DIVX, *.MPEG,*.DAT, *.MP3, *.WMA,
*.JPG and *.JPEG. Due to particularity of file code
and file mode, It is possible that some files cannot
be read.
2 If Pic & Music mode is activated, relative media
file format will include JPEG and MP3 files. After
Picture is selected, MP3 files set for play will open
both music and picture files for sync play
performance. As some files must be read while
music is being played, the speed of picture
operation responsemight beaffected.
3.Before starting operation, verify USB storage
device is of FAT32 and FAT file system format. At
present, this television does not support NTFS and
the file systemsof other format.
7.It is suggested that the external devices with
USB2.0 interface be used to improve velocity of
information readingand continuityof information
play.
4.Many movie files use suffix of AVI and MPG.
However,many kindsof format
Download from Www.Somanuals.com. All Manuals Search And Download.
USB System
USB and Card Reader setup
Note: Memory cards or USB devices are not supplied with this TV.
USB setup
1 Insert USB in the card slots at the right side of TV.
2 Insert it to be clicked in.
3 Press USB button on the remote controller to enter the stream media system.
CARD setup
This TV is Compatible with the card of SD/MMC/CF/MS format.
How to use
1
Jack of card Instructions
Note
Jack of SM card
1.Please note chooses uses
the digital memory card with
you corresponds the receptacle
2.Card reader in 1 cannot
simultaneously insert two kind
of cards in the graphical
representation position
Jacks of SD MMC MS card
Jack 1
Jack 2
Jack of CF card
2 Insert the card as right direction. As following Card in common use
1
CF card
3
MS card
2
MMC card
4
SDcard
jack
jack
jack
jack
MULTIMEDIA
CARD
COMPACT FLASH
DIGITAL MEMORYCARD
128
SD
128MB
128
Note:
1.the card insertion time, after the flows media system starts 2s , insert the card
to numerical code card reader , do not bring card to start flow media system.
2. After card insertion, indicator light will shines, and enters glitters condition,
after period of time , indicator light enters constant bright condition, indicates
already distinguishes finished, this time carries on play operation and so on .
3, In the market ,the digital card type are very many, please uses standard
product of the standard factory , meets reads takes difficult or reads speed
limits, please replaces the digital card.
Download from Www.Somanuals.com. All Manuals Search And Download.
USB System
Card data protection
- Do not remove the card/USB device when the content is being read or when
browsing. Such action may damage the memory card/USB device.
- Do not touch the terminals on the back of the card.
- Always insert a card in the correct direction. Failure to do so may result in
damage to the card and the unit.
- Do not subject the card to excessive pressure or strong impacts.
- Malfunctions of the unit or card may result in data loss or damage to the card.
- Haier shall not accept any liability for damage or loss of stored data.
Warning:
Memory cards can be swallowed
by young children. Do not allow
children to handle memory cards.
Please remove the memory card
immediately after use.
Download from Www.Somanuals.com. All Manuals Search And Download.
USB System
To start the media play
1 Press the USB button on
the remote to enter
USB system.
T
V
MOD E
M
O
DE
Multimedia Player
C H L I S T
FAV.LI ST A U DI O LI S T
DEVICE
2 The system start up about
2 seconds, and then insert
USB in the card slots
TV
ZOOM
HOTKEY
COPY
SETUP
3 Press
desired item, and press
/
to select the
RETURN
Press the Up or Down key to select the desired option.
Press OK to enter.
OK button to ensure it.
4 If to cancel the USB system, press
EXIT button to return to the main menu, and
then press TV button to select TV source.
Note: If thereare no operation two minute later, the
TV will enter the saver automatically, at the time, press
any button of USB system(with the exception of USB
button) to exit the saver menu.
To operate the menu
1. Press
/
to select the item with up or down.
2
left or right.
Press
/
to select the desired item of submenu with
3
Press OK button to ensure the desired option to
enter the submenu to resume the speed of standard.
4. Press
or
button to operate play quickly or slowly.
5.Press button to make the program stop and press
again to resume it.
6.Press ZOOM button to make zoom, and press
button to enjoy the detail.
/
7
Press HOTKEY button to call up or exit the OSD information.
And press HOTKEY button to call up or exit the OSD during
operating file copy.
8
Press RETURN button to return to previous menu and stop
play, press RETURN button repeatedly to return to main menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
USB System
To select broadcast system
1.Press
/
button to select
Multimedia Player
DEVICE item.
T
V
MOD E
M
O
DE
DEVICE
COPY
C
H
L I
S
T
FAV.LI ST A U DI O LI S T
(The device be inserted and
identified).
TV
ZOOM
HOTKEY
2. Press OK button to enter
adjusted option.
RETURN
SETUP
Press the Up or Down key to select the desired option.
Press OK to enter.
To play picture
Multimedia Player
DEVICE
COPY
1 Press
/
button to
select Picture item.
2 Press OK button to
enter the menu of play.
Picture
SETUP
Press the Right or Left key to select the desired option.
Press
to enter. PressRETU RNbac k.
3 Press
/
button to select
desired enjoy picture, and
then press OK button to
enter the play interface.
Multimedia Player
DEVICE
COPY
C No Name
D No Name
Note you may play the
pictures among selected.
SETUP
Press the Up or Down key to select the desired volume.
Press OK to enter.
4 During playing picture, Press
HOTKEYbutton to call up picture
menu, at this time, you can
operate the picture of playing.
Multimedia Player
DEVICE
COPY
F-007 .JPG
F-008 .JPG
F-009 .JPG
F-010 .JPG
F-011 .JPG
F-012 .JPG
5 Press
/
button
to select the adjusted item,
Press OK button to
confirm.
SETUP
Note:
1.the play file menu are different
with your USB devices.
Press OK to play the file. Press RETURN to return.
2. May carry on the programming
playing: repeated step 2 to choose
many documents, ( right key choice
or cancellation picture choice),
press OK to play, at this time,
the picture of play will be the picture
be choosed.
play or pause
stop;
overturn;press button to
right turns over 90
not available;
12 pictures scan;
not available;
play previous picture;
play next picture;
Resolution 1024 x 768
Note: The analysis rate basis picture
itself clarity different and is different.
6 Press RETURN button to exit.
Download from Www.Somanuals.com. All Manuals Search And Download.
USBSystem
To play Movie
1 Press / button to select
Movie option.
Multimedia Player
DEVICE
COPY
T
V
MOD E
M
O
DE
C H L I S T
FAV.LI ST A U DI O LI S T
2 Press OK to enter playing
menu.
TV
ZOOM
HOTKEY
Movie
SETUP
Press the Right or Left key to select the desired option.
Press to enter. PressRETU RNbac k.
RETURN
3 Press
/
button to
select desired movie, and
press again OK to enter
the playing movie interface.
Multimedia Player
AAA
DEVICE
COPY
C No Name
D No Name
4 During playing movie, Press
HOTKEY button to call up picture
SETUP
menu, at this time, you can
operate the movie of playing.
Press the Up or Down key to select the desired volume.
Press OK to enter.
Multimedia Player
5 Press / button
to select the adjusted item,
Press Okbutton to
confirm.
DEVICE
COPY
F-007 .JPG
F-008 .JPG
F-009 .JPG
F-010 .JPG
F-011 .JPG
F-012 .JPG
SETUP
: play or pause
: stop;
Press OK to play the file. Press RETURN to return.
: not available;
: zoom
: quickly
: slowly
: play previous movie;
: play next movie;
Captions According to movie
document itself whether has the
captions to decide
Audio Channel Mono
Play mode Standard
Audio channel Mono, Stereo,
Left, Right
Play Mode Standard, Repeat All,
Repeat File
6 Press RETURN button to exit.
Download from Www.Somanuals.com. All Manuals Search And Download.
USBSystem
To enjoy music
1 Press
/
button to select
Multimedia Player
Music option.
DEVICE
COPY
T
V
MOD E
M
O
DE
C H L I S T
FAV.LI ST A U DI O LI S T
2 Press OK button to enter
play menu.
TV
ZOOM
HOTKEY
Music
SETUP
Press the Right or Left key to select the desired option.
Press to enter. PressRETU RNbac k.
3 Press
/
button to select
RETURN
the desired music, and then
press OK button to the
playing music interface.
Multimedia Player
DEVICE
COPY
C No Name
D No Name
Note: the play file menu are
different with your USB
device.
SETUP
Press the Up or Down key to select the desired volume.
Press OK to enter.
4 When playing music, Press
/
button to
select the adjusted item,
Press OK button to
confirm.
AMultimedia Player
DEVICE
COPY
: play or pause
: stop;
: Not available
: Not available
: Quickly
: Slowly
: play previous music;
: play next music;
F-007 .JPG
F-008 .JPG
F-009 .JPG
F-010 .JPG
F-011 .JPG
F-012 .JPG
SETUP
Press OK to play the file. Press RETURN to return.
Play Mode Standard,Repeat File,
Repeat All
Play Mode Standard
5 Press RETURN button to exit
the playing.
Download from Www.Somanuals.com. All Manuals Search And Download.
USBSystem
To select the Music and PIC combo
1Press
/
button to select
Multimedia Player
DEVICE
COPY
Music and Pic option, and
press ENTER button to enter
play menu.
T
V
MOD E
M
O
DE
C H L I S T
FAV.LI ST A U DI O LI S T
TV
ZOOM
HOTKEY
SETUP
Comb
Press the Right or Left key to select the desired option.
Press ENTER to enter. PressRETUR Nback .
2 Press
/
to select desired
file(picture and music), and
press ENTER button to enter
play menu.
RETURN
Multimedia Player
AAA
DEVICE
COPY
C No Name
3 During playing music, Press
HOTKEY button to call up picture
menu, at this time, you can
D No Name
operate the movie of playing.
SETUP
Press the Up or Down key to select the desired volume.
Press ENTER to enter.
4 Press
/
button
to select the adjusted item,
Press OK button to
confirm.
Multimedia Player
DEVICE
COPY
F-007 .JPG
F-008 .JPG
F-009 .JPG
F-010 .JPG
F-011 .JPG
F-012 .JPG
play or pause
stop;
SETUP
: Not available
: Not available
: Not available
: Not available
: play previous music;
:play next music;
Press OK to play the file. Press RETURN to return.
Resulotion 1024 x 768
5 Press repeatedly RETURN button
to return.
Note: Under music and picture condition, because the
system reads the time of picture more longer than reads
the time of music , therefore in the broadcast process,
the picture appears the time lag to the music, this belongs
to the normal phenomenon.
Download from Www.Somanuals.com. All Manuals Search And Download.
USB System
To select text
T
V
MOD E
M
O
DE
1Press / button to select
text option, and press OK
button to enter text menu.
Multimedia Player
C H L I S T
FAV.LI ST A U DI O LI S T
DEVICE
COPY
TV
ZOOM
HOTKEY
RETURN
SETUP
Text
Press the Right or Left key to select the desired option.
Press to enter. PressRET URNback .
2 Press / to select desired
text, and press OK button
to confirm.
Multimedia Player
A
3 Press / button
to watch the text.
DEVICE
COPY
C No Name
D No Name
4 Press repeatedly RETURN
button to return.
SETUP
Press the Up or Down key to select the desired volume.
Press OK to enter.
Multimedia Player
DEVICE
COPY
F-007 .txt
F-008 .txt
F-009 .txt
F-010 .txt
F-011 .txt
F-012 .txt
SETUP
Press OK to play the file. Press RETURN to return.
Download from Www.Somanuals.com. All Manuals Search And Download.
USBSystem
Copy file function
T
V
MOD E
M
O
DE
1 Press
/
to select Copy item.
C H L I S T
FAV.LI ST A U DI O LI S T
Multimedia Player
DEVICE
COPY
TV
ZOOM
HOTKEY
2 Press OK button to enter
the copy menu.
RETURN
3 Press
/
button to select the
SETUP
desired item of copy.
Press the Up or Down key to select the desired option.
Press OK to enter.
4 Press HOTKEY button to call up
Copy, Paste and delete, and
Multimedia Player
then press
/
button to select
DEVICE
COPY
Copy, and press OKbutton
to confirm.
C No Name
D No Name
5 To select a folder, then Press
OK button to enter, and then
press HOTKEY button to call up
Paste item, Press OK button
to confirm.
SETUP
Press the Up or Down key to select the desired volume.
Press OKI to enter.
6 If there are the same texts
between the texts of paste, the
File already exist! Do you want
Overwrite it? will display on
the screen, at this time, press
Multimedia Player
DEVICE
COPY
F-007 .JPG
F-008 .JPG
F-009 .JPG
F-010 .JPG
F-011 .JPG
F-012 .JPG
/
button to select the
desired item, Press OK
button to confirm.
SETUP
Press OK to play the file. Press RETURN to return.
7. Press OK to cancel.
Multimedia Player
DEVICE
COPY
F-007 .JPG
F-008 .JPG
F-009 .JPG
F-010 .JPG
F-011 .JPG
F-012 .JPG
Copy
Paste
Delete
SETUP
Press OK to play the file. Press RETURN to return.
Download from Www.Somanuals.com. All Manuals Search And Download.
USBSystem
To select language
1 Press
/
to select
Multimedia Player
SETUP item.
DEVICE
COPY
T
V
MOD E
M
O
DE
C H L I S T
FAV.LI ST A U DI O LI S T
2 Press OK button to
enter SETUP menu.
TV
ZOOM
HOTKEY
SETUP
Press the Up or Down key to select the desired option.
Press OK to enter.
RETURN
3 Press
/
to select
Multimedia Player
AAA
language option, and then
press OK button to
DEVICE
COPY
Language
enter the submenu.
Slideshow Model
SETUP
Press the Up or Down key to select the desired option.
Press OK to enter.
/
4 Press
to select
desired language, and
press OK to ensure
it.
Multimedia Player
DEVICE
COPY
English
French
Spanish
5 Press RETURN button to
return.
SETUP
Press the Up or Down key to select the desired option.
PressOK to enter.
Slideshow Model
1 After entering the SETUP menu.
Multimedia Player
DEVICE
COPY
Language
2 Press
/
to select
Slideshow Model
Slideshow Model option,
and then press OK
SETUP
button to enter the submenu.
Use the Up and Down key to select the desired option.
Press OK to enter.
3 Press
/
to select
desired mode, and press
OK to ensure it.
Multimedia Player
DEVICE
COPY
Fine Model
Normal Model
4 Press RETURN button to
return.
SETUP
Fine Model
Use the Up and Down key to select the desired option.
Press OK to enter.
Picture clarity high, the
browsing speed is slow
Normal Model
Picture clarity normal, the browsing speed is quick
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
- Early malfunctions can be prevented. Careful and regular cleaning can
extend the amount of time you will have your new TV. Be sure to turn the power
off and unplug the power cord before you begin any cleaning.
Cleaning the Screen
1. Here`s agreat way tokeep the dustoff your screen for awhile. Wet a soft clothin a
mixture of lukewarmwater and alittle fabric softeneror dish washingdetergent. Wring
the cloth untilit`s almost dry, and thenuse it towipe the screen.
2. Make surethe excess wateris off the screen, andthen let itair-dry before youturn on
your TV.
Cleaning the Cabinet
To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth. Please be sure
not to use a wet cloth.
Extended Absence
If you expectto leave yourTV dormant for a longtime (such asa vacation), it`sa good
idea to unplugthe power cordto protect againstpossible damage fromlightning or
power surges.
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
1920*1080(Dot)
120V~ , 60Hz
NTSC
ATSC
Clear QAM
75 ohm
External Antenna Impedance
Dimensen(WXDXH) Unit::inches/mm
(Including stand)
57.5*13.6*40.7inches
1460*345*1034mm
125.5/56.9
HL52E
HL47E
86.5/39.2
80.5/43.4
51.6*13*38.2 inches
1310*330*970mm
48.1*12.5*34.7 inches
1207*317*881mm
HL42E
HL37E
40.1*14*32.1 inches
1018*355*815 mm
77.25/35
The specifications shown above may be changed without prior notice for quality improvement.
42 TV LCD-TFT
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Troubleshooting
For the sake of time and cost, it is strongly recommended that you check out the problem by yourself according
to the instructions listed hereunder before contacting the after-sales service for technical assistance.
Verify if the television is properly plugged.
Verify if the television is properly supplied power.
Verify if electricity is available.
No picture, no sound
Blank screen
Verify if correct signals are input.
Press INPUT button to change signal input to TV input.
Restart the television of power supply is interrupted.
Press Mute button and verify if Mute mode is set.
Switch to other channel and verify if the same problem
happens.
No sound
Press VOL+ button to see if the problem can be solved.
Verify if sound system is correct. Refer to some chapter
for adjust.
Poor sound
Verify if correct channel is selected.
Adjust the antenna.
Make adjustments by Fine Tune and Manual Scan.
No picture in some
channel
Verify if the same problem exists in other channels.
Check out of picture and sound systems.
Refer to relative instructions in the Manual for color
adjust.
No color for some
channel program
(black and white)
Verify if the antenna is correctly connected.
Verify if the antenna is in good condition.
Make fine adjustment of channel.
Spots with some or
all pictures
Check for local interference such as an electrical
appliance or power tool.
Horizontal/vertical bars
or picture shaking
Disconnect the television from power supply and, 10
seconds later, connect the television to the power supply.
If the problem still exists, contact authorized after-sales
service for technical assistance.
Television out of control
Note: Do not leave the television with static picture in an extended period as it may result in residual image on your
television screen.
Note: Production of the plasma screen requires high and precision technologies. However, there might be some dark or bright (red, blue or green) spots, or
some anomalistic stripes or spots. This is not defect. If the TV set is used in an area 2,400 meters above the sea level where the air pressure is below 750hpa,
the picture on the plasma screen may be affected and a muffled sound might be produced. These phenomena might happen in the area 1,500 meters above
the sea level. This is resulted from difference between air pressures inside and outside the display. This is not a defect covered by the limited warranty.
44 TV LCD-TFT
Download from Www.Somanuals.com. All Manuals Search And Download.
Warranty
This Haier brand product, when shipped in
its original container, will be free from
defective workmanship and materials, and
agrees that it will, at its option, either repair
the defect or replace the defective product
with a new or re-manufactured equivalent at
no change to the purchaser, for parts or
labor for the periods set forth below:
Responsibility of Haier to the purchaser with
respect to the product, and shall
constitute full satisfaction of all claims,
whether based on contract, negligence, strict
duality or otherwise. In no event shall Haier
be liable, or in any way responsible for any
damages or defects in the product which
were caused by repairs or attempted repairs
performed by anyone other than an
authorized service center or dealer; nor shall
Haier be liable, or in any way responsible
for incidental or consequential economic or
property damage. Some states do not allow
the exclusion of incidental or consequential
damages, so that above exclusion may not
apply to you.
This warranty does not apply to the
appearance of the product or the exterior of
the product, which has been damaged or
defaced, altered or modified in design or
construction. It does not apply to the
additional excluded items set forth below:
The warranty commences on the date the
item was purchased and the original
purchase receipt must be presented to the
authorized service center before warranty
repairs are rendered.
THIS WARRANTY GIVES YOU
SPECIFIC LEGAL RIGHTS. YOU MAY
ALSO HAVE OTHER RIGHTS WHICH
VARY FROM STATE TO STATE.
Warranty period for this product: one year parts
and labor.
The limited warranty described herein is in
addition to whatever implied warranties may
be granted to purchasers by law. ALL
IMPLIED WARRANTIES INCLUDING THE
WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR USE ARE LIMITED TO THE
PERIOD(s) FROM THE DATE OF PURCHASE
SET FORTH BELOW. Some states do not
allow limitations on how long an implied
warranty lasts, so the above limitation may
not apply to you.
Additional items excluded from warranty
coverage: non-rechargeable batteries.
Where to obtain service: For the location of
the nearest Haier authorized service center or
to obtain product literature, accessories,
supplies or customer assistance,
please call 1-877-337-3639.
What to do to obtain service: ship or carry in
your product to an authorized service dealer
or center .Be sure to have proof of purchase.
If you ship the product, be sure it is
packaged carefully.
Haier America
New York, NY 10018
Neither the sales personnel of the seller nor
any other person is authorized to make any
warranties other than those described herein,
or to extend the duration of any warranties
beyond the time period described herein on
behalf of Haier.
The warranties described herein shall be the
sole and exclusive warranties granted by
Haier and shall be the sole and exclusive
remedy available to the purchaser. Correction
of defects in the manner and for the period
of time described herein, shall constitute
complete fulfillment of all abilities and
Owner s Manual 47
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|