HL15R/HLC15R/ HL15RW/HLC15RW/HL15T/HLC15T /
HL19R/HLC19R / HL19T/HLC19T/ HL19RW/HLC19RW/
HL22R/HLC22R/ HL22T/HLC22T
LCD TV & LCD TV/DVD Combo
USER MANUAL
Please read this manual carefully
before using this TV set and keep it
for future reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
Important Safety Instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves,
or other apparatus (including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade or the third
prong are provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long
periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power-supply cord or plug
is damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or
has been dropped.
15)The apparatus shall not be exposed to dripping or splashing and that no
objects filled with liquids, such as vases, shall be placed on the apparatus.
16)The mains plug or appliance inlet is used as the disconnect device, remain it
readily operable during the apparatus normal use.
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Instructions(for TV with DVD)
PRECAUTIONS
FCC WARNING-This equipment may
generate or use radio frequency
energy.Changes or modifications to this
equipment may cause harmful
interference unless the modifications are
expressly approved in the instruction
manual.The user could lose the authority
to operate this equipment if an
unauthorized change or modification is
made.
CAUTION:USE OF CONTROLS OR
ADJUSTMENTS OR PERFORMANCE
OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS RADIATION
EXPOSURE.
CAUTION:VISIBLE AND INVISIBLE
LASER RADIATION WHEN OPENAND
INTERLOCK DEFEATED.DO NOT
STARE INTO BEAM.
LASER SAFETY
This unit employs a laser.Only a qualified
service person should remove the cover
or attempt to service this device,due to
possible eye injury.
LOCATION:INSIDE,NEAR THE DECK
MECHANISM.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENT
Safety Notice Items...................................................................................
Front Panel Controls..................................................................................
Connection Options...................................................................................
Remote Control ........................................................................................
1
2
3
4
5
7
7
7
7
Remote Control Key Functions
.............................................................
Connection Instructions.............................................................................
Grounding..............................................................................................
External equipment Connections..............................................................
Antenna Connection.............................................................................
VGA Setup.............................................................................................
8
Component Setup................................................................................
VCR Setup...........................................................................................
HDMI Input.........................................................................................
Cable TV Setup....................................................................................
External Component Source Setup.......................................................
8
9
9
10
10
Basic Operating Instructions.......................................................................
11
Switch On/Off the TV set..........................................................................
11
Choose the input source..........................................................................
11
Audio Control..........................................................................................
11
Mute......................................................................................................
INFO.....................................................................................................
Select the TV Channel You Want.............................................................
11
11
12
Picture Mode...........................................................................................
12
Audio Mode............................................................................................
Sleep.....................................................................................................
GUIDE...................................................................................................
ARC button.............................................................................................
-button...................................................................................................
CH.LIST button.......................................................................................
FAV.LIST button......................................................................................
Menu Operations.......................................................................................
Video Menu Options...............................................................................
Video Menu Options Continued...............................................................
Audio Menu Options................................................................................
Audio Menu Options Continued................................................................
Channel Menu Options.............................................................................
12
12
12
12
13
13
13
14
14
15
16
17
18
Channel Menu Options Continued..............................................................
19
Function Menu Options.............................................................................
20
Function Menu Options Continued..............................................................
21-23
Lock Menu Options ..................................................................................
23
Lock Menu Options Continued..................................................................
PC Menu Options....................................................................................
PC Menu Options Continued....................................................................
DVD Features..........................................................................................
24-28
28
29
30-31
32
Special Function Playback.......................................................................
DVD System Setup...................................................................................
Playable Discs.........................................................................................
Disc Protection and DVD Characteristics...................................................
Troubleshooting Guide...............................................................................
Specifications...........................................................................................
Warranty ..................................................................................................
33-36
38
38
39
40
41
Note: DVD is availableonly on certainmodels. Please referto your originalset
for specific details.
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Notice Items
Incorrect usage may cause fire or electric shock. To prevent this, please do as
required when you are installing, using and cleaning this machine. To ensure
your safety and extend the life-span of LCD-TV, please read the following items
carefully before using:
Please read and understand all the instructions before operation;
Please keep this manual for later use;
Please comply strictly with the warning instructions on the machine and
in this book;
Please comply with the instructions provided;
Please do not use additional devices that are not recommended by
manufacturer:
Before operation, please make sure that the operating voltage of your unit is
correct;
Do not place the unit on unstable, dusty and humid places;
Never put the unit in direct sunlight or near heat sources;
Allow enough space for proper ventilation;
Please keep water away from the LCD-TV . If water comes in contact with the
LCD-TV, disconnect the power cord from the power source, then wipe the set
with a dry soft cloth;
Do not remove the back cover. If service is needed, please contact an
Authorized service technician.
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Panel Controls
T1 series
2
3
4
5
1
R1 series
TV/AV MENU VOL- VOL+ CH-
CH+
POWER
6
7
Control Panel Function
1. Power
2. TV/AV
Selects the inputsignals.
3. MENU Press to select the main menu
4. VOL- Volume down / Left button to adjustthe item inthe OSD
VOL+ Volumeup / Rightbutton to adjustthe item inthe OSD
/Press to enter
5. CH- TV channel down / to select the item in the menu
CH+ TV channel up / to select the item in the menu
6. Power indicator
7. Remote Sensor
Receives the signals from the remote control
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection Options
DVD
STOP
PLAY/PAUSE OPEN/CLOSE
PREV
NEXT
DVD insert
The above figure is for reference only, connections
may differ depending upon the models and terminals
of some models may be on the back bottom of the set
Label towards back
Please see the real set
of the DVD position
Component Input
ANT IN(Antenna Input)
Connect cable or
antenna signals to
Connect a component
video device to these
jacks
PC audio in
Connect the audio
output from the pc
to the PC audio
input port
S-VIDEO
Connect S-Video
the TV, either
directly or through
your cable box.
out from an S-Video
device to the jacks.
Y
Pb
Pr
R
AUDIO IN
L
VGA IN
PC AUDIO IN
HDMI
VIDEO IN
S-VIDEO
ANT IN
R
L
AUDIO
Video in
Connect video
output from an
external device
to this jack
Headphone
VGA
Audio in
Connect to the VGA
15PIN analog output
connector of a PC
graphics card to use
set as a PC display
Connect audio
output from an
external device
to these jacks
Audio in
Connect audio
output from an
external device
to these jacks
HDMI
Connect to HDMI
output of other
equipment
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
Installing Batteries
Remove the battery cover.
Insert two size AAbatteries matching
the +/-polarities of the battery to the +/-
marks inside the battery compartment
(see image 1-for remote of TV with
DVD) ..
Image 1
Insert two size AAAbatteries matching
the +/-polarities of the battery to the +/-
marks inside the battery compartment
(see image 2-for remote of TV without
DVD) .
Image 2
Precautions
As strong light may interfere with the
signals, change yourposition to
operate the remote control if
the television cannot be turned
on or off as expected.
Make sure that there is no
obstacle between theremote
controller and televisionset.
Make sure thattwo AA1.5V or AAA
depending up the model alkaline
batteries are loaded. The batteries
must be of the same type, must be
inserted properly, and must not be
rechargeable.
Keep the remote control
away from heat sources or
humid areas toensure
effective performance of
the remote.
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control Key Functions
When using the remote control, aim it
Buttons on the remote control
towards the remotesensor on theTV
Power
DVD Open/close
POWER
SLEEP
TV/AV
TV/DVD OPEN/CLOSE
Input selection
TV Sleep button
Q.VIEW
MUTE
INFO
TV/DVD
Mute
Return to previous channel in TV mode
Program Infromation
Program Number
Select MONO,STEREO, SAP in NTSC system
CC( closed caption) On / Off
Select additional channels
Adjust Picture Mode
Volume/Channel Selection
MENU
1
5
2
6
0
3
7
4
8
CC
9
SAP
P.MODE
CH+
VOL
-
MENU
VOL
+
Confirm button
OK
S.MODE
Adjust sound mode
DVD STOP
CH-
STOP
REV
PAUSE/STEP
SETUP
SUBTITLE
NEXT
DVD SUBTITLE
DVD SETUP
FWD
PREV
DVD PAUSE/STEP
DVD FAST REVERSE
DVD FAST FORWARD
DVD MENU
D.MENU
A-B
REPEAT
SLOW
PLAY/ENTER
DVD Next Chapter
DVD Previous Chapter
DVD REPEAT
ANGLE
TITLE/PBC SEARCH
DVD PLAY/ENTER
AUDIO PROGRAM ZOOM
D.CALL
GUIDE
DVD A-B REPEAT
UP
DVD Cursor Move button
LEFT
DVD SLOW
10+
EXIT
ARC
RIGHT
DVD ANGLE
DOWN
CH.LIST
FAV.LIST
DVD SEARCH
DVD AUDIO Mode
DVD TITLE/PBC
DVD PROGRAM
DVD CALL
Zoom Function
DVD 10+
Exit On Screen Display
Select the aspect ratio
Shows program schedule in TV
Open the channel list in TV
Open the favourite channel list in TV
(For TV withDVD)
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control Key Functions
When using the remote control, aim it
towards the remotesensor on theTV
Buttons on the remote control
MUTE
Mute
Return to previous channel in TV mode
Input selection
Q.VIEW
INFO
INPUT
EXIT
Program Number
Select MONO, STEREO, SAP in NTSC system
Confirm button
Volume/Channel Selection
CC ( closed caption) On / Off
TV Sleep button
Shows program schedule in TV
Select the aspect ratio
Open the favorite channel list in TV
Open the channel list in TV
Adjust sound mode
SAP
OK
P.MODE
MENU
CH+
Select additional channels
Adjust Picture Mode
VOL
-
VOL
+
MENU
Exit On Screen Display
Program Infromation
Power
CH-
CC
SLEEP
S.MODE
CH.LIST
GUIDE
ARC
FAV.LIST
Note: the instructionon this manualtakes
remote of TVwith DVD forexample.
(For TV withoutDVD)
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection Instructions
Grounding
Ensure that you connect the grounding / earth wire to prevent possible
electric shock. If grounding methods are not possible, have a qualified
electrician install a separate circuit breaker. Do not try to ground the
unit by connectingit to telephone wires, lighteningrods, or gaspipes.
External Equipment Connections
Antenna Connection
- Antenna or Cable Service with a Cable Box Connections
- For optimum picture quality, adjust antenna direction if needed.
Multi-family Dwellings/Apartments
(Connect to wallantenna socket)
wall antenna
socket
Bronze Wire
RF coaxial wire(75 ohm)
VHF antenna
UHF antenna
Turn clockwise to tighten.
Bronze Wire
outdoor
antenna
Be careful notto bend thebronze
wire when connecting the antenna.
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
To improve picture quality in a poor
signal area, purchase and install a
signal amplifier.
If the antenna needs to be split for two
Tvs, install a 2-Way Signal Splitter
in the connections.
If the antenna is not installed properly,
contact your dealer for assistance.
NOTE: Cables shownare not includedwith the TV
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection Instructions
VGA Setup
You can use your LCD-TV as a monitor for your personal computer using a VGA
cable (not supplied).
Connection and use steps:
1.Read the userguide supplied with
your computer and ensure that it has
a VGAconnector;
2.Make sure that the power of the LCD
-TV and thePC are off;
3.Connect a Dtype 15-pin PCinterface
cable ( not supplied ) to the PC video
interface connector on the PC. Then
connect the other end to the PC video
interface connector on the back of the
LCD-TV.Tighten the screwson the PC
connectors once they are firmly
connected;
4.Turn on the power ofthe LCD-TV first,
and then turn on the power of the PC;
5.Press the TV/AV button to setthe video inputmode of theLCD-TV to PC;
Once the input for PC is selected and if you see no image press function
F8 on youpc.
6.Check the image on your TV. There may be noise associated with the resolution,
vertical pattern, contrast or brightness in PC mode. If noise is present, change
the PC mode to another resolution, change the refresh rate to another rate or
adjust the brightness and contrast on the menu until the picture is clear. If the
refresh rate of the PC graphic card can not be changed, change the PC graphic
card or consult the manufacturer of the PC graphic card.
Resolution
Mode
VGA
Resolution
640x480
800x600
1024x768
Line frequency(KHz) Frame frequency(Hz)
31.5
37.9
48.4
60
60
60
SVGA
XGA
Note: Allabove listed aresubject to VESAcriteria.
Component Setup
How to connect
Connect the DVD video outputs (Y, PB, PR)
to the Component(Y, Pb, Pr) IN jacks on
the TV and connect theDVD audio outputs
to the AUDIO IN jacks on the TV, as shown
in the figure.
NOTE: If your DVD player doesnot have
component video output,use S-Video.
How to use
1. Turn on the DVD player, insert a DVD.
2. Use the TV/AV button on theremote
control to selectthe proper input.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection Instructions
VCR Setup
- To avoid picture noise (interference), leave an adequate distance between the
VCR and TV
Connection and use steps:
1.Read the user guide supplied with your AV devices and ensure that it has
Composite or S-Video connectors;
2.Make sure that the power of the LCD-TV and the AV device are off;
Connection Option 1
Set VCR output switch to 3 or 4 and then
tune TV to the same channel number.
Connection Option 2
1. Connect the audio and video cables from
the VCR's output jacks to the TV input jacks,
as shown in the figure.
When connecting the TV to VCR, match
the jack colors (Video = yellow,Audio
Left = white,and Audio Right = red).
If you connect an S-VIDEO output from
VCR to the S-VIDEO input, the picture
quality is improved; compared to conne-
cting a regular VCR to the Video input.
1
2. Insert a video tape into the VCR and press
PLAY on the VCR. (Refer to the VCR owner
manual.)
s
2
.
3.Turn on the LCD-TV first ; and then turn on the
power of the AV device;
4.Press the TV/AV button to set
the video input mode of the
LCD-TV to S-Video mode or
Video mode.
VCR
HDMI Input
How to connect
Connect the cables from the external equipment's
output jacks to the TV input jacks, as shown in the figure.
How to use
1. Select the input source by using TV/AV button
on the remotecontrol or onthe TV.
2. Operate the corresponding external equipment.
Refer to external equipment operating guide.
HDMI
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection Instructions
Cable TV Setup
- After subscribing to a cable TV service from a local provider you can watch cable
TV programming. The TV cannot display TV programming unless a TV tuner
device or cableTV converter box is connectedto the TV.
- For furtherinformation regarding cableTV service, contact your localcable TV
service provider(s).
Connection Option 1
1. Select 3 or 4 with channel switch on cable
box.
2. Tune the TV channel to the same selected
output channel oncable box.
3. Select channelsat the cablebox or with
the cable box remote control.
Connection Option 2
1. Connect the audio and video cables from
the Cable Box'soutput jacks tothe TV
input jacks, as shown in the figure.When
connecting the TV to a Cable Box, match
the jack colors
(Video = yellow, Audio Left = white, and
Audio Right = red).
2. Select the input source by using the TV/AV
button on the remote control.
3. Select your desired channel with the
remote control forcable box.
External Component Source Setup
How to connect
Connect the audio and video cables from
the external equipment's output jacks to the
TV input jacks, as shown in the figure.
When connecting the TV to external equip-
ment, match the jack colors (Video = yellow,
Audio Left =white, and Audio Right =red).
How to use
1. Select the input source by using the TV/AV
button on the remote control.
2. Operate the corresponding external equi-
pment. Refer to external equipment ope-
rating guide.
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operating Instructions
Switch On/Off the TV set
When the POWER
button is pressed and the LCD-TV is turned on, the
indicator light on the front of the LCD-TV changes from red to green. When the
LCD-TV is turned off using the power button, the LCD-TV will go into standby
mode and theindicator light turnsred(or turns dark).
NOTE: The color of theindicator light maydiffer based upon the modelpurchased.
Choose the input source
Change the picture source so you can watch your TV, VCR, DVD, Cable ,
or any otherdevices that areconnected to yourTV.
1. Press the TV/AV button to enterthe Select Sourcemenu and thenuse
TV/AV button to select the desired items TV, Video, S-Video, Component
DVD, PC, HDMI .
2. Press the OK button to confirm .
Audio Control
1.Press the VOL+ button to increase the volume. A number will appear
on screen indicating the volume level.
2.Press the VOL- button to decrease the volume. A number will appear
On screen indicating the volume level.
Mute
1.Press the MUTE button to mute the sound temporarily. A mute icon
Appears on the screen.
2.Press the MUTE button or VOL+ again to restore the sound.
The mute icon disappears.
INFO
Press INFO button to display current program information.
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operating Instructions
Select the TV Channel You Want
You can use the number buttons and button on the remote control to directly
select TV channels and press OK to confirm.
And you can press the buttons(CH+/CH-) on the remote control or on the panel to
make a selection.
Picture Mode
Press P.MODE button on the remote control for menu display . For desired mode
as follows:
Mild Standard Vivid Custom
Audio Mode
Press SS.MODE button on the remote control for menu display . For desired mode
as follows:
Off Concert Living Room Hall Bathroom Cave Arena Church
Sleep
Press SLEEP button to set the time : Off-5 Min-10 Min-15 Min-30 Min- 45Min
-60 Min-90 Min-120 Min-180 Min-240Min
This function allows you to turn off the television after a pre-selected
number of minutes
GUIDE(only available in digital signal)
Press GUIDE button in digital channels to display Guide menu.(This menu is
just for you to see the information and can not be changed)
Press VOL+/VOL- to select information for you to look over.
ARC button
Press to select the aspect ratio among Full Screen, Normal, Wide, Zoom and
Cinema. (Display modemay differ from different inputs)
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operating Instructions
button
Press to select additional channels (digital and analog) being broadcast by the
same station. For example, to select digital channel “11.1”, press “11”, then
press “ ” and “1”.
CH.LIST button
Press to display the channel list. Press VOL+/VOL- to turn to the next or previous
page, press CH+/CH- to select the item and OK button to select the channel you
desired.
FAV.LIST button
Adding favorite channels
Press FAV.LIST under one channel. The favorite channel list opens.
Press CH+ or CH– to select ablank box, thenpress OK to confirm .
The channel willbe added tothe favorites channellist.
Press OK again, the channel will be removed from the favorites channel list.
Tuning to a favorite channel
Press FAV.LIST. The favorite channel listopens.
Press CH+ or CH– to select thechannel and pressOK to confirm
Your LCD TV automatically tunes to the channel you selected.
.
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Operations
* In this manual, the OSD (On Screen Display) may be differ from your TV
These are examples to illustrate the TV's operation.
Press TV/AV to select the input source. The menu for each source may be
different .
1. Press MENU button to display the main menu, and CH+/CH- to select the
main menu function.
2. Press VOL+/OK button to enter the sub menu and CH+/CH- to go up and down
to select the desired option .
3. Press VOL+/OK button to confirm and VOL+/VOL- to make changes to
the parameters
4. Press the EXIT button to return to the main menu.
5. Press the MENU button to exit the menu screen.
Video Menu Options
Picture quality can be adjusted for any input separately .
The picture qualityon the screencan be adjustedas follows:
1. Press MENU button and CH+/CH- until the following menu appears on the
screen.
2. Press VOL+/OK button to enter the menu function and CH+/CH- to scroll up
and down to select the desired function.
3.Press VOL+/OK button to confirm and VOL+/VOL- increase and decrease
the level toadjust the selectedoption to yourpreference .
4. Repeat step 2 and step 3 until desired picture quality has been achieved .
Mode
Custom
Video
Brightness
Contrast
50
50
50
0
Audio
Color
Tint
Channel
Sharpness
Color Temperature
Advanced Video
50
Function
Lock
CH+/-
VOL+/-
Select
OK Adjust
EXIT Back
Video
Note:
1.The options maybe different because of theinputs.
2.Symbols on topof the menuin this manualmay differ from the actualset display.
3.The picture optionscan be changedonly in Custommode only, the othermodes
are fixed.
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Operations
Video Menu Options continued
Function:
Mode: Select the type of picture which best corresponds to your viewing
requirements by selecting Picture Mode in Video menu. You may select the
picture mode directly by pressing the P.MODE button on the remote control.
Brightness :Press CH+/CH- button and VOL+/OK to confirm, then press
VOL+/VOL- to adjust the brightness of the picture.
Contrast : Press CH+/CH- button and VOL+/OK to confirm, then press
VOL+/VOL- to adjust the contrast of the picture.
Color : Press CH+/CH- button and VOL+/OK to confirm, then press
VOL+/VOL- to adjust color saturation.
Tint : Adjust the tone of the picture .
Sharpness : Adjust the amount of the detail enhancement , the image
sharpness rises as the number increases (By increasing the level, it will show
cleaner and clearerimages and bydecreasing the level, it will makethe picture
smoother).
Color Temperature: This will increase ordecrease Warm (red) and Cool (blue)
colors to suitpersonal preferences.Select Cool to give thewhite colors ablue tint,
Standard to give thewhite colors aneutral tint, Warm to give the white colors
a red tint. Color temperature This will increaseor decrease Warm (red) and
Cool (blue) colors tosuit personal preferences.SelectCool to give thewhite
colors a blue tint, Standard to give thewhite colors aneutral tint, Warm to give
the white colorsa red tint.
Contrast, Brightness, Sharpness, Color Temperatureand Tintcan only beadjusted when
Mode in Custommode.
Advanced Video:To adjust the picture in advanced level:
DNR: Digital Noise Reduction. To adjust toreduce the appearanceof digitizing
error caused bythe compression:Medium,Strong,Off and Low.
Black Level Extender: To adjust the abilityin the blackareas detail ofthe
picture:On and Off.
White Peak Limiter: To adjust the abilityin the whiteareas detail ofthe
picture:On and Off.
CTI: Color TransientIntensity.To adjust thepicture for colorerrors:Medium,Strong,
Off and Low
Flesh Tone:To adjust the flashcolors:On and Off.
Adaptive Luma Control: To adjust changes inthe luminance ofthe picture:On andOff
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Operations
Audio Menu Options
Sound can be adjusted for any input as follows:
1. Press MENU button and CH+/CH- until the following menu appears on the
screen.
Video
0
Balance
Bass
50
50
Audio
Treble
Sound Surround
Mode
On
Off
Channel
Equalizer
SPDIF Type
AVL
Off
PCM
Off
Function
Lock
Audio Only
CH+/-
VOL+/-
Select
OK Adjust
EXIT Back
Audio
You can adjust sound options to the levels you prefer.
2. Press VOL+/OK button to enter the Audio menu and CH+/CH- to go up and
down to select the desired option .
3.Press VOL+/OK button to confirm and VOL+/VOL- increase and decrease
the level toadjust the selectedoption to yourpreference .
4. Repeat step 2 and step 3 until desired audio quality has been achieved .
Function :
Balance : Press CH+/CH- button and VOL+/OK to confirm, then press
VOL+/VOL- to adjust theaudio output betweenleft and rightspeakers.
Bass : Press CH+/CH- button and VOL+/OK to confirm, then press
VOL+/VOL- to increase or decrease the level of the lower-pitched sounds .
Treble : Press CH+/CH- button and VOL+/OK to confirm, then press
VOL+/VOL- to increase or decrease the level of the higher-pitched sounds
Sound Surround: To turn the simulated surround sound on and off.
Mode : Press VOL+/OK to select the type of sound which best
corresponds to your lightning requirements by selecting Mode in Audio
menu.
Equalizer: To adjust the equalizer: Off, Rock, Pop, Live, Dance, Techno, Classic
and Soft.
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Operations
Audio Menu Options Continued
SPDIF Type To adjust the spdif output: Off, Dolby Digital and PCM.
AVL This will reduces the differences in volume level among broadcasters.
Audio Only: Press VOL+/OK button to confirm, the following display will appear
on the screen:
If enter Audio Only mode, press POWER to exit!
OK
Cancel
Press VOL+/VOL- to select OK , then press OK to confirm. The TV screen will
be black and no picture , but the sound is still normal.
You can press POWER button to reveal the picture on the screen.
SAP Broadcasts Setup:
This TV can receive MTS stereo programs and SAP
(Secondary Audio Program) that accompanies the stereo program;
if the station transmits an additional sound signal as well as the original one.
When having selected SAP button on the remote control, this TV can only
receive the signal when the TV station transmits the proper signals.
Mono sound is automatically received if the broadcast is only in Mono; even
though Stereo or SAP has been selected.
Select Mono if you want to listen to mono sound during stereo/SAP
broadcasting.
Stereo or SAP can be received in a Analog channel.
1. Use the SAP button to select your desired MTS mode in a analog signal.
Each time you press the SAP button, Mono, Stereoor SAP appear.
If other languages are available on the digital signal, select them with the
SAP button.
2. Press EXIT button to save and return to TV viewing.
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Operations
Channel Menu Options
1. Press MENU button and CH+/CH- until the following menu appears on the
screen.
Video
Tuner
Antenna
Channel Scan
Channel Skip
Channel Label
Audio
Channel
Function
Lock
CH+/-
VOL+/-
Select
EXIT Back
Channel
Note: Channel menuwill appear inmain menu onlyin TV mode.
2. Press VOL+/OK button to enter the Channel menu and CH+/CH- to go up and
down to select the desired option .
3.Press VOL+/OK button to confirm and VOL+/VOL- increase and decrease
the level to adjust the selected option to your preference .
4. Repeat step 2 and step 3 until desired quality has been achieved .
Function:
Tuner: Press VOL+/OK button to select Antenna or Cable .
Channel Scan: Press VOL+/OK button to start to scan, pressEXIT to cancel
Video
Status: Scanning...
Analog Channels: 4
Digital Channels: 3
Antenna
Audio
Channel
Function
Lock
40%
EXIT Cancel
Channel Scan
All channels now available will be
automatically preset in order .After the search has finished, the first program
number will display on the screen. This search automatically adds only the
active channels in your area to the TV's memory. It deletes any channels on
which there is no broadcast or a poor signal. The channels found are
automatically saved.
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Operations
Channel Menu Options Continued
Channel Skip: Press VOL+/OK button to enterthe submenu then press CH+/
CH- to select thechannel number (eg.2)and press OK to confirm, a mark will be
display in the pane as follows and this channel will be skipped next time you
press CH+/CH- but you can press digits button to select the channel. If you want
to resume thechannel, press OK button again.
Video
Audio
2 Analog
3 Analog
4 Analog
5 Analog
Channel 5-1 Digital
6 Analog
7 Analog
Function
8 Analog
Lock
9 Analog
10 Analog
CH+/-
VOL+/-
Select
OK Set
EXIT Back
Channel Skip
Channel Label: Allows you to name the channel that is selected.
Press VOL+/OK button to enter the submenu.
Video
Channel Index
Channel Label
1
Audio
Channel
Function
Lock
CH+/-
VOL+/-
Select
EXIT Back
Channel Label Set
Then press CH+/CH- to select Channel Index and Channel Label and
VOL+/VOL- to select the position ofthe item that you wantto change, afterward
press TV/AV to input the numbers and symbols and OK button to confirm.
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Operations
Function Menu Options
1. Press MENU button and CH+/CH- until the following menu appears on the
screen.
Language
English
Short
Video
OSD Timeout
OSD Transparency Middle
Audio
Screen Mode
Blue Screen
DPMS
Full screen
Channel
On
On
Function
Lock
Time Setup
Closed Caption
Default
CH+/-
VOL+/-
Select
EXIT Back
Function
2. Press VOL+/OK button to enter the Function menu and CH+/CH- to go up and
down to select the desired option .
3.Press VOL+/OK button to confirm and VOL+/VOL- increase and decrease
the level to adjust the selected option to your preference .
4. Repeat step 2 and step 3 until desired quality has been achieved .
Function:
Language: Press VOL+/VOL- button to select language of the OSD.
OSD Timeout: Press VOL+/VOL- to select Middle, Short and Long to change the
time of the OSD display.
OSD Transparency: Press VOL+/VOL- to select among Low, High and Middle
to change the transparency of the OSD. To select Low, the OSD is opacity.
Screen Mode: Press VOL+/VOL- to select among Full Screen, Normal, Wide,
Zoom and Cinema to change the display mode. ( display mode may differ from
different inputs)
Blue Screen: Press VOL+/VOL- to select On , the screen will be in blue after
3 seconds if there is no signal.
DPMS: PC Power Management. To set On, the set will be in standby mode
automatically if no signal in 2 minutes; if signal input , the set will be on again
automatically.
Time Setup: Press VOL+/OK to enter the submenu.
Time Zone: Press VOL+/VOL- to select the appropriate time zone.
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Operations
Function Menu Options Continued
Time Zone
Video
Date/Time
Central
Off
Sleep Timer
Audio
Channel
Function
Lock
CH+/-
VOL+/-
Select
EXIT Back
Time Setup
Date/Time: Press VOL+/OK to enter the submenu.
Auto
Date
Time
Off
Video
00:00
Audio
Channel
Timer
On
00:00
00:00
On Time
Off Time
Function
Lock
CH+/-
VOL+/-
Select
EXIT Back
Date/Time
AUTO: Press VOL+/VOL- to select On or Off . When AUTO mode on , the time
can not be adjusted. Select Off , you can operate to set the time manually.
Date: Press VOL+/VOL- to select the position and digits button to set the date.
Time: Press VOL+/VOL- to select the position and digits button to set the time.
Timer: Press VOL+/VOL- to select Onor Off.To select Off, the time can not be
adjusted.
On Time/Off Time: Press VOL+/VOL- to select the position and digits button to
set the time.
Closed Caption: Press VOL+/OK to enter the submenu.
NTSC Caption
DTV Caption
Off
Off
Video
DTV Caption Style
Audio
Channel
Function
Lock
CH+/-
VOL+/-
Select
EXIT Back
Closed Caption
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Operations
Function Menu Options Continued
NTSC Caption: Press CH+/CH- to select the Closed Caption options. It helps the
hearing impaired with the broadcast program, as well as helping children
learn how to read. A built in decoder displays the audio portion of a program as text
on the screen when this option is selected.
CC1: When CC1is displayed on TV means CC mode is turned on.
CC2 to CC4: For other modes of video related broadcast information.
TEXT1: For program guide and other information displayed by broadcasters.
(This blocks a large portion of the picture on your screen).
TEXT2 to TEXT4 :For other modes of information displayed by broadcasters.
(This blocks a large portion of the picture on your screen).
IMPORTANT: Closed captioning availability entirely depends on broadcasters
supplying the signal. Therefore, closed captioning might not always be
available and language availability will differ by broadcast.
Note: Select CC1 for full translation of the primary language such as English in
your area. Select CC2 for secondary language translation such as French or
any other language that may be broadcast in your area.
DTV Caption: Press VOL+/VOL- to select Service1/Service2/Service3/Service4/Service5/
Service6/Off.
DTV Caption Style: Press VOL+/OK to enter the submenu.
Style
Custom
Large
White
Solid
Video
Size
Text Color
Text Opacity
BG Color
Audio
Channel
Black
Solid
BG Opacity
Window Color
Window Opacity
Function
Lock
Black
Solid
ABC
CH+/-
VOL+/-
Select
EXIT Back
DTV Caption Style
Style: Press VOL+/VOL- to select one of Default and Custom. When you select
default, the others are disable and can not be adjusted. When you adjust the
following system,A mark of
display the effect.
ABC in a pane will be on the right of the OSD to
Size: Press VOL+/VOL- to select the size of caption display according to your own
preference.
Text Color: Press VOL+/VOL- to select the text color or the opacity of the text box of
caption display according to your own preference.
Select a color and one of the opacity options.
Text Opacity: Press VOL+/VOL- to specify the opacity for the text color.
BG Color: Press VOL+/VOL- to select a background color.
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Operations
Function Menu Options Continued
BG Opacity: Press VOL+/VOL-to select the opacity for the background color.
Window Color: Press VOL+/VOL- to select according your own preference
Window Opacity: Press VOL+/VOL- to select the edge color according your own
preference.
Default: Press VOL+/OK to enter the submenu.
Are you sure?
OK
Cancel
Press VOL+/VOL- to select OK or Cancel then OK to confirm. If OK, the parameter
will return to the factory set.
Lock Menu Options
1. Press MENU button and CH+/CH- until the following menu appears on the
screen.
Enter Password
Video
Audio
Channel
Function
Lock
EXIT Back
Lock
2. Press VOL+/OK to enter and then press digits button to input the digits( The
initial password is 0000. If you forget your password, you can always input 9443
to regain control) . The menu will display as follows:
Channel Block
Video
Program Block
Password
Audio
Clean All
Channel
Function
Lock
CH+/-
VOL+/-
Select
OK Enter
EXIT Back
Lock
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Operations
Lock Menu Options Continued
Channel Block: Press VOL+/OK to enter thesubmenu as follows.
Video
10-1 Digital WCAU-DT
11 Analog
Audio
11-1 Digital MBC DTV
12 Analog
Channel
13 Analog
14 Analog
14-1 Digital ATSC-1
14-2 Digital ATSC-2
14-3 Digital ATSC-3
15 Analog
Function
Lock
CH+/-
VOL+/-
Select
OK Set
EXIT Back
Channel Lock
Press CH+/CH- to select the channel you want to lock, then press OK to confirm.
The channel is locked and a lock mark appears in the pane. If you want to unlock
the channel, repeat the operation above again. Then press EXIT to exit step by
step.
Program Block: Press VOL+/OK to enter the submenu as follows.
Video
Parental Lock
Parental Guide
MPAA Rating
CA Eng Rating
CA Fren Rating
Block Unrated
On
On
Audio
Channel
Function
Lock
CH+/-
VOL+/-
Select
EXIT Back
Program Block
Parental Lock: Press VOL+/VOL- to select On or Off. Used to lock all the system
following . To set Off, the system following can not be available.
Parental Guide: Press VOL+/OK to enter thesubmenu as follows.
Press CH+/CH-/VOL+/VOL- to select theitem you wantto lock. Then press OK
to confirm tolock and pressagain to resumeit.
Parental Guide Technology:
The "P.L. Technology" allows youto use U.S. and Canadian Movies and TV
PROGRAMS Guide ratingsto block certaintypes of TV programs andmovies.
To clearly understand TV program rating codes, read the following information:
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Operations
Lock Menu Options Continued
A
D
L S V FV
Video
TV-Y
TV-Y7
TV-G
Audio
TV-PG
TV-14
TV-MA
Channel
Function
Lock
Allowed Rating Blocked Rating
CH+/-
VOL+/-
Select
OK Set
EXIT Back
Parental Guide
U.S. TV Program Ratings
TV-Y: For all children - these types of rated programs are designed for a very young
audience, including children from ages 2-6.
TV-Y7: Directed towards older children - this type of rated programs may include
comedic violence of mild physical, or may frighten children under the age of 7.
TV-G: General audience - these types of rated programs contains little or no
violence, no strong language, andlittle or no sexual dialogueand situations.
TV-PG:Parental Guidance Suggested-this type of rated programs may contain
limited violence, some suggestive sexualdialogue and situations, and rare
language.
TV-14: Parents strongly cautioned-these types of rated programs may contain sexual
content, strong language and more intense violence.
TV-MA:Mature audience only these types of rated programs may contain sexual
violence, explicit sexual content and profane language.
(A)All: Blocks all available sub_ratings.
(FV)Fantasy Violence : This type of rated programs contain Fantasy and cartoon
violence.
(D)Dialogue: This type of rated programs contain dialogue withsexual content.
(L)Languag: This type of rated programs contain offensive language.
(S)Sex: This type of rated programs contain sex.
(V)Violence: This type of rated programs contain violence.
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Operations
Lock Menu Options Continued
MPAA Rating: Press VOL+/OKto enter the submenu as follows.
Press CH+/CH- to select the item you want to lock. Then press OK to confirm to
lock and press again to resume it.
Video
G
PG
PG-13
R
Audio
Channel
NC-17
X
Function
Lock
Allowed Rating Blocked Rating
CH+/-
VOL+/-
Select
OK Set
EXIT Back
MPAA Rating
To understand clearly about movie rating codes, read the following list:
U.S. Movie Rating Chart
G: General Audience-this type of movie rating means all ages admitted to see
the movie.
PG: Parental guidance suggested. Some material may not be suitable for children.
PG-13:Parents Strongly Cautioned - this type of movie rating means some material
may not be appropriate for children under13.
R:Restricted- This type of movie rating means children under 17 of age require
to be with parent or guardian.
NC-17:This type of movie rating means no one 17 and under admitted.
X: This type of movie rating means adults only.
CA Eng Rating: Press VOL+/OK to enter the submenu as follows.
Press CH+/CH- to select the item you want to lock. Then press OK to confirm to
lock and press again to resume it.
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Operations
Lock Menu Options Continued
Video
C
C8+
G
Audio
PG
14+
18+
Channel
Function
Lock
Allowed Rating Blocked Rating
CH+/-
VOL+/-
Select
OK Set
EXIT Back
CA Eng Rating
To clearly understand Canadian program rating codes, read the following list:
Canadian English Rating Chart
C: This type of programming is intended for children under age 8. There is no
offensive language, nudity or sexual content.
C8+:These types of rated programs are generally considered acceptable for children
8 years and over. There is no profanity, nudity or sexual content.
G: These types of rated programs are generally suitable for all audiences.
PG: Parental Guidance Suggested -in these types of rated programs, some material
may not be suitable for children.
14+: In these types of rated programs, some content may not be suitable for viewers
under the age of 14.Parents are strongly cautioned not to have their children
view 14+ rated programs by pre-teens and early teens.
18+: Adults Only-these types of rated programs are only for adult viewers only.
CA Fren Rating: Press VOL+/OKto enter the submenu as follows.
Press CH+/CH- to select the item you want to lock. Then press OK to confirm to
lock and press again to resume it.
Video
G
8 ans+
13 ans+
16 ans+
18 ans+
Audio
Channel
Function
Lock
Allowed Rating Blocked Rating
CH+/-
VOL+/-
Select
OK Set
EXIT Back
CA Fren Rating
C
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Operations
Lock Menu Options Continued
Canadian French Rating Chart
G:These types of rated programs are generally suitable for all audiences.
8 ans+: Children 8 years and above (French)
13 ans+: 13 years old and above(French)
16 ans+: 16 years old and above(French)
18 ans+: Adults Only-these types of rated programs are only for adult viewers only.
Blocked Unrated: Press VOL+/VOL- to selectOn or Off.
Used to lock all the channel not rated .
Password: Press VOL+/OK to enter the submenu , press digits button to input
the number of 0-9 twice in the New Password and Confirm Password. Then you
can change the password when you input the same number twice.
Clean All: Press VOL+/OK to enter the submenu:
Are you sure?
OK
Cancel
Press VOL+/VOL- to select OK or Cancel then OK to confirm. If OK, the parameter
will return to the factory set.
Note: if there is any lock mark on the top of the set such as channel lock, parental
lock and so on, you can press OK to resume it .( Press OK to display password
menu and input your password.)
PC Menu Options
1. Press MENU button and CH+/CH- button to select Feature menu in VGA mode.
2. Press VOL+/OK button to enter the Video menu and CH+/CH- to go up
and down to select the desired option .
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Operations
PC Menu Options Continued
3.Press VOL+/OK button to confirm and VOL+/VOL- increase and decrease
the level to adjust the selected option to your preference .
4. Repeat step 2 and step 3 until desired quality has been achieved .
Mode
Custom
Video
Brightness
Contrast
50
50
Audio
Color Temperature
Advanced Video
PC
Channel
Function
Lock
CH+/-
VOL+/-
Select
OK Adjust
EXIT Back
Video
PC: Press CH+/CH- button to select and VOL+/OK to confirm, the PC
menu as below:
Auto Sync
Video
H Position
V Position
Phase
50
50
50
50
Audio
Clock
Channel
Function
Lock
CH+/-
VOL+/-
Select
OK Adjust
EXIT Back
PC
Auto Sync: PressCH+/CH- button and then press VOL+ to auto adjust that
automatically adjusts the available options for the best viewing configuration.
H Position: Press CH+/CH- button and then press VOL+/VOL- to adjust the
horizontal position of the picture.
V Postion:Press CH+/CH- button and then press VOL+/VOL- to adjust the
vertical position of the picture.
Phase: Press CH+/CH- and then press VOL+/VOL- to adjust the phase of the
picture.
Clock: Press CH+/CH- button and then press VOL+/VOL- to adjust the clock of
the picture.
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Features
Basic Playback
Preparations
Stop playback
Press the TV/DVD button on the remote control
to enter the DVD status.
1. Press STOP
button to go to stop mode, the TV
screen will show the start logo. With some discs,
such as DVD or CDs, the player can resume
playback from the point where it was stopped.
2. Press PLAY/ENTER to resume playback from the
location where the playback was stopped.
3. Press STOP twice to stop completely.
Note: Do not insert a disc until the DVD input states
open
Basic playback
1.Place the DVD in the disc slot. The disc will be
loaded automatically after one to two seconds
then the DVD player reads the DVD and displays
the opening menu If there is no disc placed in
DVD mode, OPEN will display on the screen all
the times)
Previous and Next
During Playing, pressing the PREV
key will
Do not place a disc that is unplayable in this
DVD player.
restart the last chapter and skip chapters
backwards with each subsequent press until the
start of thedisc is reached.
Each press of NEXT key duringplaying will
skip the current chapter and play the next one.
Some discs do not start automatically. Press
PLAY/ENTER tostart playback.
2. Some discs may start playback with a menu. Use
the cursor buttons on the remote control to select
menu options and press PLAY/ENTER to start. You
may also press the digit buttons to select a menu
option directly. Many DVDs will not allow this during
start-up.
Fast forward and Fast reverse
1. Press FWD
to fast forward through the disc.
button is pressed, the
Each time the FWD
fast forward motion speed changes.
2. Press PLAY/ENTER to resume normal playback.
3. Press REV
to fast reverse through the disc.
button is pressed, the
Each time the REV
Pause playback
fast reverse motion speed changes.
4. Press PLAY/ENTER to resume normal playback.
1. Press PAUSE/STEP to pause playback (still mode).
The sound will be muted during still mode.
2. Press PLAY/ENTER to resume normal playback.
Single step playback
1. When paused, press PAUSE/STEP continuous
to single step forward to the next frame in the
video.
2. Press PLAY/ENTER to resume normal playback.
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Features(Continued)
Advanced Playback
IMPORTANT NOTE:
ALL DESCRIBED FUNCTIONS AFOR DVD DISCS. IF YOU PLAY OTHER DISC
FORMATS THE OPERATION AND ON SCREEN DISPLAY WILL BE DIFFERENT.
PROGRAM
SUBTITLE
Press " SUBTITLE ", the screen will display "SUBTI-
TLE 01/XX XXXXX", "01" indicates the ordinal
number of this language; "XX" indicates total number
of language; "XXXXXX" indicates the language of
country. (The number of language depends on disc.)
This function can select up to 32 languages display-
ed on screen.
When playing discs, press "PROGRAM" to enter
program mode. Press the digit buttons to select the
program number that you want. When finished move
the cursor to select "START" . Press PLAY/ENTER
to confirm. This will start the program playback.
SEARCH
REPEAT
Press "SEARCH" once to display the search
menu. Press the button again to select. Press
the program number buttons to input the item
you require. Press PLAY/ENTER to confirm.
Press " REPEAT " and Chapter repeat will be
displayed on screen, the second press will display
Title repeat, the third press will display All repeat,
the fourth press will cancel this function.
SLOW
A-B
Press SLOW to play a disc in slow motion. Each
time the SLOW button is pressed, the slow
motion speed changes.
Press " A-B " to begin start-point, press again
to set an end point and complete setting. The
selected section A-B will be repeated. The third
press will cancel this function.
Press PLAY/ENTER to resume normal playback;
Note: This function dose not work for CD .
ANGLE
TITLE/PBC
When enjoying sports, concert or theatre, press this
key to watch same actions in different angles. (Valid
for discs possessing this function. Using a disc
recorded in multi-angle you can view the scene from
different angles,for example,front, side, whole view
and exterior scene).
With some DVD discs pressing this key will display
the title menu. You can then use the digit buttons
to select the item you prefer.
AUDIO
D.MENU
Press this key can change the mode of audio.
such as: Audio 1/2: AC 3 2 CH English
Audio 2/2: AC 3 5.1 CH English
Press this key to display the root menu, select
items according to your preference. (This
function will work on a DVD with a multi-layer
menu.)
Press this button to cycle between Mono Left, Mono
Right, Mix-Mono and Stereo.
Note: When press this button continuously, you must
allow a 3 second interval between selections.
D.CALL
Pressing this key will cycle through "Title Elapsed",
"Title Remain", "Chapter Elapsed", "Chapter Remain"
and "Display off ".
Download from Www.Somanuals.com. All Manuals Search And Download.
Special Function Playback
JPEG DISC PLAYBACK
When a disc containing standard JPEG picture files is inserted into the player, a
navigation menu will be displayed automatically. Use the UP and DOWN cursor
buttons to select a file then press PLAY/ENTER. The slide show will commence.
Press PREVIOUS or NEXT to move between pictures. Press pause to stop on the
current picture. Press PLAY/ENTER to resume normal playing.
A JPEG disc contains JPEG (.jpg) format picture information that can be decoded
by a micro-computer software and displayed through the video output interface or on
the television screen.
This function has many applications. For example one can save files from a scanner
or digital camera in the JPEG format, record these on a CD-R disc and present them
to an audience through this player.
The JPEG format is a convienient method to store images in a small amount of
memory space, and is ideal for archiving information.
SCREEN SAVER FUNCTION
This unit employs a screen savermode to helpprotect the tubeduring static videopictures. This can
be turned offon the GENERALSETUP PAGE.
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD System Setup
DVD System Setup
General Setup Process
SETUP
1.Press the setup button, the
general set up page will be
displayed press twice the
..General Setup Page..
Tv Display
Angle Mark
Osd Lang
Caption
LB
4
3/Ps
3/Lb
9
preference page will be displayed
On
4
ENG
On
16
2.Press to select, the
or
item, then press to enter the
submenu.
Screen Saver Off
PLAY/ENTER
or
3.Press to select then
press PLAY/ENTER to confirm.
..Preference Page..
4.Press SETUPrepeatedly to
exit the set-upmenus.
Parental
Password
Default
1 Kid Saf
2 G
3 Pg
4 Pg 13
5 Pgr
6 R
7 Nc17
8 Adult
NOTE: Preference page will be
displayed when there is no DVD in
the unit. To access this page, press
SETUP button twice.
General Setup Page
ASPECT RATIO DESCRIPTION
When using the DVD with the internal TV,
select 4 3/LB.
..General Setup Page..
The following information applies only
when the DVD output is connected to an
external TV.
Tv Display
Angle Mark
Osd Lang
Caption
LB
4
3/Ps
3/Lb
9
On
4
ENG
On
16
SETUP
4:3/PS (PS = Pan and Scan)
Screen Saver Off
You may select if you have a normal aspect
ratio (4:3) TV, although the NORMAL/LB
(letter box) is a more common choice. In PS
mode, widescreen material will fill the screen, but at the expense of chopping
off extreme left and right edges of the original film picture. For this feature to
work, the disc must be specially coded. Such discs are uncommon.
4:3/LB (LB = Letter Box)
PLAY/ENTER
You may select this if you have a normal aspect ratio (4:3) TV. Widescreen
material will be shown in pure unaltered form, allowing the entire picture area
of the original film to be viewed without any side cropping. Black bars will
appear above and below the picture.
16:9
You may select this if you have a widescreen (16:9) TV. Back bars may still
appear above and below the picture even if using a widescreen TV. This is
because some film directors prefer to use ultra widescreen aspect ratios e.g.
2.35:1. This will normally be indicated on the DVD packaging.
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD System Setup(Continued)
DVD System Setup
General Setup Page
..General Setup Page..
Tv Display
LB
On
ANGLE MARK: Users can select a particular
camera angle when playing a DVD which offers
.
Angle Mark
Osd Lang
Caption
On
Off
ENG
On
multiple angles.
Screen Saver Off
This item allows you to set Angle Mark ON or OFF.
..General Setup Page..
On Screen Display (OSD) Language: Users
can select on-screen display language.
Tv Display
Angle Mark
Osd Lang
Caption
LB
On
ENG
On
English
Spanish
Screen Saver Off
..General Setup Page..
Tv Display
Angle Mark
LB
On
CAPTION: This function allows you to display or
hide the caption.
Osd Lang
Caption
ENG
On
On
Off
Screen Saver Off
..General Setup Page..
SCREEN SAVER: If the screen saver is on, then
there will be an animated picture of DVD on the
screen whenever the DVD player is idle for more
than 3 minutes .
Tv Display
Angle Mark
LB
On
Osd Lang
Caption
ENG
On
Screen Saver Off
On
Off
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD System Setup(Continued)
DVD System Setup
Preference Page
The Preference Page is only available when there is no disc
in the player.
SETUP
PARENTAL: The parental
control function works in
conjunction with the
different censorship classes
assigned to DVDs. These
classes help to control the
types of DVDs that the family
watches, There are up to 8
censorship classes for DVDs.
..Preference Page..
1 Kid Saf
2 G
3 Pg
4 Pg 13
5 Pgr
6 R
Parental
Password
Default
PLAY/ENTER
7 Nc17
8 Adult
Note:
1 To change this setting you must enter your password.
(Initial password is 1234)
2 When set to OFF, all discs may be viewed.
PASSWORD CHANGE:
..Preference Page..
You can change your password
SETUP
Parental
by entering 4 digits. You must
confirm the 4 digits before the
new password can be accepted.
Password
Default
Change
PLAY/ENTER
Old Password
New Password
Confirm Pwd
NOTE:
If you forget your password
or a password is accidentally
set enter 1369 as the password.
This will enable you to regain
control.
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD System Setup(Continued)
DVD System Setup
DEFAULT: Resets all settings
SETUP
..Preference Page..
(except password and parental
lock status) for this DVD player
back to the manufacturers
original settings. Press ENTER
to perform the reset.
Parental
Password
Default
Reset
PLAY/ENTER
Note:
Some functions may not be available depending on the
type of disc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Playable Discs
The following discs can be played:
You cannot play discs other than those listed above.
You cannot play non-standardized discs, even if they may be labelled as above.
The performance of CD-R or CD-RW disc depends on the way the disc was burned. In
a few cases, their performance may not be consistant or may not even operate at all.
This DVD Player is designed and manufactured according to the Region
Management Information that is recorded on a DVD disc. If the Region number
described on theDVD disc doesnot correspond tothe Region numberof this DVD
Player, thisDVD player willnot play thatdisc.
1
This Region number of this DVD Player is .
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Protection and DVD Characteristics
Compare DVD disc with other discs:
DVD
LD
SVCD
VCD
CD
Digital/
MPEG I
Encode
method
Digital/MPEG
Digital
Digital
Analog
Single- Double Single- Double-
side
-side
side
side
single- single double- double-
650MB
650MB
650MB
Capacity
layer
4.7G
-layer layer
8.5G
layer
17G
9.4G
Single-side
60 minutes
double-side
120 minutes
133
minutes minutes minutes minutes
242
266
484
45 minutes 74 minutes 74 minutes
Playing Time
Disc diameter
12cm
30cm/20cm
12cm
12cm
12cm
No more than
430 line
Horizontal
resolution
No more than No more than
350 line
More than 500 line
250 line
Picture
proportion
One kind
One kind
Multiple kinds
32 kinds
One kind
16 kinds
at most
Subtitle
4 kinds
4 kinds
at most
4 kinds
at most
Language
2 kinds
2 kinds
8 kinds
48KHz, 96KHz/
6, 20, 24bit
44.1KHz/
16bit
44.1KHz/
16bit
44.1KHz/
16bit
44.1KHz/
16bit
Sound quality
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting Guide
To assist in location possible faults use help guide below.
Troubleshooting
Verify ifthe television isproperly plugged in.
Verify ifthe television isproperly supplied withpower.
Verify thatelectricity is available.
No picture, no sound
Verify if correct signals are input.
Press TV/AV button to change signal input to TV input.
Restart the television of power supply is interrupted.
Blank screen
Press MUTE button and verify if Mute mode is on.
Switch to another channel and verify if the same problem
happens.
No sound
Press VOL+ button to see if the problem can be solved.
Verify ifsound system isfunctional. Refer tochapter on
adjusting.
Poor sound
Verify ifcorrect channel isselected.
Adjust the antenna.
No picture in some
channel
Verify if the same problem exists in other channels.
Check picture and sound systems.
Refer to relative instructions in the Manual for color
adjust.
No color for some channel
program (black and white)
Verify ifthe antenna iscorrectly connected.
Verify ifthe antenna isin good condition.
Make fine adjustmentof channel.
Spots with some or
all pictures
Disconnect the televisionfrom power supplyand, 10
seconds later, reconnect to thepower supply.
If the problemstill exists, contactan authorized
service depot fortechnical assistance.
Abnormal functioning
Note:
1.If the fault can not be repaired using the above guide consult with your local authorized
service center.
2.The TV set must only be repaired by a qualified registered service person. Never attempt to
remove the backcover as theTV set has dangerous voltageslevels inside thatmay be
fatal or causefire.
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Model
15
19 without DVD 19 with DVD
NTSC, ATSC, Clear QAM
1.5W+1.5W
22
Picture, sound
system
Audio output
AV input PC input S-VIDEO input PC audio input
YPbPr input Antenna input
External input port
~120V 60Hz
Power requirements
Power consumption
Temperature
50W
60W
80W
70W
Working:+5 ~+35
Storage:-15 ~+45
Working:20% ~ 80%
Storage: 5% ~ 90%
Humidity
Remote control
Batteries
User manual
Accessories
NOTE
Design and specifications are subject to change without notice.
Dimensions quoted in this manual are approximate.
Download from Www.Somanuals.com. All Manuals Search And Download.
Warranty
Warranty
90 days labor
and one year parts .
Download from Www.Somanuals.com. All Manuals Search And Download.
V0.1
0090503374
Download from Www.Somanuals.com. All Manuals Search And Download.
|